iopt_pages which avoids multi-pinning and double accounting of page
consumption.
-iommufd_ioas is sharable between subsystems, e.g. VFIO and VDPA, as long as
+iommufd_ioas is shareable between subsystems, e.g. VFIO and VDPA, as long as
devices managed by different subsystems are bound to a same iommufd.
IOMMUFD User API
* - HDR linearize
- The merger outputs a long exposure capture as long as it is not
saturated.
- * - HDR substraction
+ * - HDR subtraction
- This involves subtracting the short exposure frame from the long
exposure frame.
* - No HDR
.. note::
- Wide band receiver might be implictly enabled if you enable
+ Wide band receiver might be implicitly enabled if you enable
carrier reports. In that case it will be disabled as soon as you disable
carrier reports. Trying to disable wide band receiver while carrier
reports are active will do nothing.
- Command
There is a variant of rc5 called either rc5x or extended rc5
-where there the second stop bit is the 6th commmand bit, but inverted.
+where there the second stop bit is the 6th command bit, but inverted.
This is done so it the scancodes and encoding is compatible with existing
schemes. This bit is stored in bit 6 of the scancode, inverted. This is
done to keep it compatible with plain rc-5 where there are two start bits.
- Put device into zoom/full screen mode
- - ZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH
+ - ZOOM / FULL SCREEN / ZOOM+ / HIDE PANEL / SWITCH
- .. row 80
- An alternate form of the sliced VBI data payload used when 36
lines of sliced VBI data are present. No line masks are provided
in this form of the payload; all valid line mask bits are
- implcitly set.
+ implicitly set.
* - }
-
- Luma AC coefficient table index.
* - __s8
- ``y_dc_delta``
- - Luma DC delta vaue.
+ - Luma DC delta value.
* - __s8
- ``y2_dc_delta``
- Y2 block DC delta value.
The JPEG class includes controls for common features of JPEG encoders
and decoders. Currently it includes features for codecs implementing
-progressive baseline DCT compression process with Huffman entrophy
+progressive baseline DCT compression process with Huffman entropy
coding.
1998-11-08: Many minor changes. Most symbols have been renamed. Some
material changes to struct v4l2_capability.
-1998-11-12: The read/write directon of some ioctls was misdefined.
+1998-11-12: The read/write direction of some ioctls was misdefined.
1998-11-14: ``V4L2_PIX_FMT_RGB24`` changed to ``V4L2_PIX_FMT_BGR24``,
and ``V4L2_PIX_FMT_RGB32`` changed to ``V4L2_PIX_FMT_BGR32``. Audio
``VIDIOC_G_INFMT``, ``VIDIOC_S_OUTFMT``, ``VIDIOC_G_OUTFMT``,
``VIDIOC_S_VBIFMT`` and ``VIDIOC_G_VBIFMT``. The image format
struct v4l2_format was renamed to struct v4l2_pix_format, while
- struct v4l2_format is now the envelopping structure
+ struct v4l2_format is now the enveloping structure
for all format negotiations.
5. Similar to the changes above, the ``VIDIOC_G_PARM`` and
- In all the tables that follow, bit 7 is the most significant bit in a byte.
- Formats are described with the minimum number of pixels needed to create a
byte-aligned repeating pattern. `...` indicates repetition of the pattern.
- - Y'\ :sub:`x`\ [9:2] denotes bits 9 to 2 of the Y' value for pixel at colum
+ - Y'\ :sub:`x`\ [9:2] denotes bits 9 to 2 of the Y' value for pixel at column
`x`.
- `0` denotes padding bits set to 0.
- Default cropping rectangle, it shall cover the "whole picture".
Assuming pixel aspect 1/1 this could be for example a 640 × 480
rectangle for NTSC, a 768 × 576 rectangle for PAL and SECAM
- centered over the active picture area. The same co-ordinate system
+ centered over the active picture area. The same coordinate system
as for ``bounds`` is used.
* - struct :c:type:`v4l2_fract`
- ``pixelaspect``
The notifying process can be preempted, resulting in the notification being
aborted. This can be problematic when trying to take actions on behalf of the
notifying process that are long-running and typically retryable (mounting a
-filesytem). Alternatively, at filter installation time, the
+filesystem). Alternatively, at filter installation time, the
``SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV`` flag can be set. This flag makes it
such that when a user notification is received by the supervisor, the notifying
process will ignore non-fatal signals until the response is sent. Signals that
If there is no good match when mapping then a new profile name may be
added. Drivers which wish to introduce new profile names must:
- 1. Explain why the existing profile names canot be used.
+ 1. Explain why the existing profile names cannot be used.
2. Add the new profile name, along with a clear description of the
expected behaviour, to the sysfs-platform_profile ABI documentation.
projects / linux-block.git / commitdiff