can handle batch more effectively, but task_work_add() isn't exported
for module, so ublk has to be built to kernel.
+config BLKDEV_UBLK_LEGACY_OPCODES
+ bool "Support legacy command opcode"
+ depends on BLK_DEV_UBLK
+ default y
+ help
+ ublk driver started to take plain command encoding, which turns out
+ one bad way. The traditional ioctl command opcode encodes more
+ info and basically defines each code uniquely, so opcode conflict
+ is avoided, and driver can handle wrong command easily, meantime it
+ may help security subsystem to audit io_uring command.
+
+ Say Y if your application still uses legacy command opcode.
+
+ Say N if you don't want to support legacy command opcode. It is
+ suggested to enable N if your application(ublk server) switches to
+ ioctl command encoding.
+
source "drivers/block/rnbd/Kconfig"
endif # BLK_DEV
| UBLK_F_NEED_GET_DATA \
| UBLK_F_USER_RECOVERY \
| UBLK_F_USER_RECOVERY_REISSUE \
- | UBLK_F_UNPRIVILEGED_DEV)
+ | UBLK_F_UNPRIVILEGED_DEV \
+ | UBLK_F_CMD_IOCTL_ENCODE)
/* All UBLK_PARAM_TYPE_* should be included here */
#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
ublk_queue_cmd(ubq, req);
}
+static inline int ublk_check_cmd_op(u32 cmd_op)
+{
+ u32 ioc_type = _IOC_TYPE(cmd_op);
+
+ if (IS_ENABLED(CONFIG_BLKDEV_UBLK_LEGACY_OPCODES) && ioc_type != 'u')
+ return -EOPNOTSUPP;
+
+ if (ioc_type != 'u' && ioc_type != 0)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
{
struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
* iff the driver have set the UBLK_IO_FLAG_NEED_GET_DATA.
*/
if ((!!(io->flags & UBLK_IO_FLAG_NEED_GET_DATA))
- ^ (cmd_op == UBLK_IO_NEED_GET_DATA))
+ ^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
+ goto out;
+
+ ret = ublk_check_cmd_op(cmd_op);
+ if (ret)
goto out;
- switch (cmd_op) {
+ switch (_IOC_NR(cmd_op)) {
case UBLK_IO_FETCH_REQ:
/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
if (ublk_queue_ready(ubq)) {
if (!IS_BUILTIN(CONFIG_BLK_DEV_UBLK))
ub->dev_info.flags |= UBLK_F_URING_CMD_COMP_IN_TASK;
+ ub->dev_info.flags |= UBLK_F_CMD_IOCTL_ENCODE;
+
/* We are not ready to support zero copy */
ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
* know if the specified device is created as unprivileged
* mode.
*/
- if (cmd->cmd_op != UBLK_CMD_GET_DEV_INFO2)
+ if (_IOC_NR(cmd->cmd_op) != UBLK_CMD_GET_DEV_INFO2)
return 0;
}
dev_path[header->dev_path_len] = 0;
ret = -EINVAL;
- switch (cmd->cmd_op) {
+ switch (_IOC_NR(cmd->cmd_op)) {
case UBLK_CMD_GET_DEV_INFO:
case UBLK_CMD_GET_DEV_INFO2:
case UBLK_CMD_GET_QUEUE_AFFINITY:
{
struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
struct ublk_device *ub = NULL;
+ u32 cmd_op = cmd->cmd_op;
int ret = -EINVAL;
if (issue_flags & IO_URING_F_NONBLOCK)
if (!(issue_flags & IO_URING_F_SQE128))
goto out;
- if (cmd->cmd_op != UBLK_CMD_ADD_DEV) {
+ ret = ublk_check_cmd_op(cmd_op);
+ if (ret)
+ goto out;
+
+ if (_IOC_NR(cmd_op) != UBLK_CMD_ADD_DEV) {
ret = -ENODEV;
ub = ublk_get_device_from_id(header->dev_id);
if (!ub)
goto out;
ret = ublk_ctrl_uring_cmd_permission(ub, cmd);
- } else {
- /* ADD_DEV permission check is done in command handler */
- ret = 0;
+ if (ret)
+ goto put_dev;
}
- if (ret)
- goto put_dev;
-
- switch (cmd->cmd_op) {
+ switch (_IOC_NR(cmd_op)) {
case UBLK_CMD_START_DEV:
ret = ublk_ctrl_start_dev(ub, cmd);
break;
/*
* Admin commands, issued by ublk server, and handled by ublk driver.
+ *
+ * Legacy command definition, don't use in new application, and don't
+ * add new such definition any more
*/
#define UBLK_CMD_GET_QUEUE_AFFINITY 0x01
#define UBLK_CMD_GET_DEV_INFO 0x02
#define UBLK_CMD_END_USER_RECOVERY 0x11
#define UBLK_CMD_GET_DEV_INFO2 0x12
+/* Any new ctrl command should encode by __IO*() */
+#define UBLK_U_CMD_GET_QUEUE_AFFINITY \
+ _IOR('u', UBLK_CMD_GET_QUEUE_AFFINITY, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_GET_DEV_INFO \
+ _IOR('u', UBLK_CMD_GET_DEV_INFO, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_ADD_DEV \
+ _IOWR('u', UBLK_CMD_ADD_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_DEL_DEV \
+ _IOWR('u', UBLK_CMD_DEL_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_START_DEV \
+ _IOWR('u', UBLK_CMD_START_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_STOP_DEV \
+ _IOWR('u', UBLK_CMD_STOP_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_SET_PARAMS \
+ _IOWR('u', UBLK_CMD_SET_PARAMS, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_GET_PARAMS \
+ _IOR('u', UBLK_CMD_GET_PARAMS, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_START_USER_RECOVERY \
+ _IOWR('u', UBLK_CMD_START_USER_RECOVERY, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_END_USER_RECOVERY \
+ _IOWR('u', UBLK_CMD_END_USER_RECOVERY, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_GET_DEV_INFO2 \
+ _IOR('u', UBLK_CMD_GET_DEV_INFO2, struct ublksrv_ctrl_cmd)
+
/*
* IO commands, issued by ublk server, and handled by ublk driver.
*
* It is only used if ublksrv set UBLK_F_NEED_GET_DATA flag
* while starting a ublk device.
*/
+
+/*
+ * Legacy IO command definition, don't use in new application, and don't
+ * add new such definition any more
+ */
#define UBLK_IO_FETCH_REQ 0x20
#define UBLK_IO_COMMIT_AND_FETCH_REQ 0x21
#define UBLK_IO_NEED_GET_DATA 0x22
+/* Any new IO command should encode by __IOWR() */
+#define UBLK_U_IO_FETCH_REQ \
+ _IOWR('u', UBLK_IO_FETCH_REQ, struct ublksrv_io_cmd)
+#define UBLK_U_IO_COMMIT_AND_FETCH_REQ \
+ _IOWR('u', UBLK_IO_COMMIT_AND_FETCH_REQ, struct ublksrv_io_cmd)
+#define UBLK_U_IO_NEED_GET_DATA \
+ _IOWR('u', UBLK_IO_NEED_GET_DATA, struct ublksrv_io_cmd)
+
/* only ABORT means that no re-fetch */
#define UBLK_IO_RES_OK 0
#define UBLK_IO_RES_NEED_GET_DATA 1
*/
#define UBLK_F_UNPRIVILEGED_DEV (1UL << 5)
+/* use ioctl encoding for uring command */
+#define UBLK_F_CMD_IOCTL_ENCODE (1UL << 6)
+
/* device state */
#define UBLK_S_DEV_DEAD 0
#define UBLK_S_DEV_LIVE 1
projects / linux-block.git / commitdiff