dm: dm-zoned: use __bio_add_page for adding single metadata page

[linux-block.git] / lib / bitmap.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * lib/bitmap.c
 * Helper functions for bitmap.h.
 */

#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/ctype.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/thread_info.h>
#include <linux/uaccess.h>

#include <asm/page.h>

#include "kstrtox.h"

/**
 * DOC: bitmap introduction
 *
 * bitmaps provide an array of bits, implemented using an
 * array of unsigned longs.  The number of valid bits in a
 * given bitmap does _not_ need to be an exact multiple of
 * BITS_PER_LONG.
 *
 * The possible unused bits in the last, partially used word
 * of a bitmap are 'don't care'.  The implementation makes
 * no particular effort to keep them zero.  It ensures that
 * their value will not affect the results of any operation.
 * The bitmap operations that return Boolean (bitmap_empty,
 * for example) or scalar (bitmap_weight, for example) results
 * carefully filter out these unused bits from impacting their
 * results.
 *
 * The byte ordering of bitmaps is more natural on little
 * endian architectures.  See the big-endian headers
 * include/asm-ppc64/bitops.h and include/asm-s390/bitops.h
 * for the best explanations of this ordering.
 */

bool __bitmap_equal(const unsigned long *bitmap1,
                    const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k, lim = bits/BITS_PER_LONG;
        for (k = 0; k < lim; ++k)
                if (bitmap1[k] != bitmap2[k])
                        return false;

        if (bits % BITS_PER_LONG)
                if ((bitmap1[k] ^ bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
                        return false;

        return true;
}
EXPORT_SYMBOL(__bitmap_equal);

bool __bitmap_or_equal(const unsigned long *bitmap1,
                       const unsigned long *bitmap2,
                       const unsigned long *bitmap3,
                       unsigned int bits)
{
        unsigned int k, lim = bits / BITS_PER_LONG;
        unsigned long tmp;

        for (k = 0; k < lim; ++k) {
                if ((bitmap1[k] | bitmap2[k]) != bitmap3[k])
                        return false;
        }

        if (!(bits % BITS_PER_LONG))
                return true;

        tmp = (bitmap1[k] | bitmap2[k]) ^ bitmap3[k];
        return (tmp & BITMAP_LAST_WORD_MASK(bits)) == 0;
}

void __bitmap_complement(unsigned long *dst, const unsigned long *src, unsigned int bits)
{
        unsigned int k, lim = BITS_TO_LONGS(bits);
        for (k = 0; k < lim; ++k)
                dst[k] = ~src[k];
}
EXPORT_SYMBOL(__bitmap_complement);

/**
 * __bitmap_shift_right - logical right shift of the bits in a bitmap
 *   @dst : destination bitmap
 *   @src : source bitmap
 *   @shift : shift by this many bits
 *   @nbits : bitmap size, in bits
 *
 * Shifting right (dividing) means moving bits in the MS -> LS bit
 * direction.  Zeros are fed into the vacated MS positions and the
 * LS bits shifted off the bottom are lost.
 */
void __bitmap_shift_right(unsigned long *dst, const unsigned long *src,
                        unsigned shift, unsigned nbits)
{
        unsigned k, lim = BITS_TO_LONGS(nbits);
        unsigned off = shift/BITS_PER_LONG, rem = shift % BITS_PER_LONG;
        unsigned long mask = BITMAP_LAST_WORD_MASK(nbits);
        for (k = 0; off + k < lim; ++k) {
                unsigned long upper, lower;

                /*
                 * If shift is not word aligned, take lower rem bits of
                 * word above and make them the top rem bits of result.
                 */
                if (!rem || off + k + 1 >= lim)
                        upper = 0;
                else {
                        upper = src[off + k + 1];
                        if (off + k + 1 == lim - 1)
                                upper &= mask;
                        upper <<= (BITS_PER_LONG - rem);
                }
                lower = src[off + k];
                if (off + k == lim - 1)
                        lower &= mask;
                lower >>= rem;
                dst[k] = lower | upper;
        }
        if (off)
                memset(&dst[lim - off], 0, off*sizeof(unsigned long));
}
EXPORT_SYMBOL(__bitmap_shift_right);


/**
 * __bitmap_shift_left - logical left shift of the bits in a bitmap
 *   @dst : destination bitmap
 *   @src : source bitmap
 *   @shift : shift by this many bits
 *   @nbits : bitmap size, in bits
 *
 * Shifting left (multiplying) means moving bits in the LS -> MS
 * direction.  Zeros are fed into the vacated LS bit positions
 * and those MS bits shifted off the top are lost.
 */

void __bitmap_shift_left(unsigned long *dst, const unsigned long *src,
                        unsigned int shift, unsigned int nbits)
{
        int k;
        unsigned int lim = BITS_TO_LONGS(nbits);
        unsigned int off = shift/BITS_PER_LONG, rem = shift % BITS_PER_LONG;
        for (k = lim - off - 1; k >= 0; --k) {
                unsigned long upper, lower;

                /*
                 * If shift is not word aligned, take upper rem bits of
                 * word below and make them the bottom rem bits of result.
                 */
                if (rem && k > 0)
                        lower = src[k - 1] >> (BITS_PER_LONG - rem);
                else
                        lower = 0;
                upper = src[k] << rem;
                dst[k + off] = lower | upper;
        }
        if (off)
                memset(dst, 0, off*sizeof(unsigned long));
}
EXPORT_SYMBOL(__bitmap_shift_left);

/**
 * bitmap_cut() - remove bit region from bitmap and right shift remaining bits
 * @dst: destination bitmap, might overlap with src
 * @src: source bitmap
 * @first: start bit of region to be removed
 * @cut: number of bits to remove
 * @nbits: bitmap size, in bits
 *
 * Set the n-th bit of @dst iff the n-th bit of @src is set and
 * n is less than @first, or the m-th bit of @src is set for any
 * m such that @first <= n < nbits, and m = n + @cut.
 *
 * In pictures, example for a big-endian 32-bit architecture:
 *
 * The @src bitmap is::
 *
 *   31                                   63
 *   |                                    |
 *   10000000 11000001 11110010 00010101  10000000 11000001 01110010 00010101
 *                   |  |              |                                    |
 *                  16  14             0                                   32
 *
 * if @cut is 3, and @first is 14, bits 14-16 in @src are cut and @dst is::
 *
 *   31                                   63
 *   |                                    |
 *   10110000 00011000 00110010 00010101  00010000 00011000 00101110 01000010
 *                      |              |                                    |
 *                      14 (bit 17     0                                   32
 *                          from @src)
 *
 * Note that @dst and @src might overlap partially or entirely.
 *
 * This is implemented in the obvious way, with a shift and carry
 * step for each moved bit. Optimisation is left as an exercise
 * for the compiler.
 */
void bitmap_cut(unsigned long *dst, const unsigned long *src,
                unsigned int first, unsigned int cut, unsigned int nbits)
{
        unsigned int len = BITS_TO_LONGS(nbits);
        unsigned long keep = 0, carry;
        int i;

        if (first % BITS_PER_LONG) {
                keep = src[first / BITS_PER_LONG] &
                       (~0UL >> (BITS_PER_LONG - first % BITS_PER_LONG));
        }

        memmove(dst, src, len * sizeof(*dst));

        while (cut--) {
                for (i = first / BITS_PER_LONG; i < len; i++) {
                        if (i < len - 1)
                                carry = dst[i + 1] & 1UL;
                        else
                                carry = 0;

                        dst[i] = (dst[i] >> 1) | (carry << (BITS_PER_LONG - 1));
                }
        }

        dst[first / BITS_PER_LONG] &= ~0UL << (first % BITS_PER_LONG);
        dst[first / BITS_PER_LONG] |= keep;
}
EXPORT_SYMBOL(bitmap_cut);

bool __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
                                const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k;
        unsigned int lim = bits/BITS_PER_LONG;
        unsigned long result = 0;

        for (k = 0; k < lim; k++)
                result |= (dst[k] = bitmap1[k] & bitmap2[k]);
        if (bits % BITS_PER_LONG)
                result |= (dst[k] = bitmap1[k] & bitmap2[k] &
                           BITMAP_LAST_WORD_MASK(bits));
        return result != 0;
}
EXPORT_SYMBOL(__bitmap_and);

void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
                                const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k;
        unsigned int nr = BITS_TO_LONGS(bits);

        for (k = 0; k < nr; k++)
                dst[k] = bitmap1[k] | bitmap2[k];
}
EXPORT_SYMBOL(__bitmap_or);

void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
                                const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k;
        unsigned int nr = BITS_TO_LONGS(bits);

        for (k = 0; k < nr; k++)
                dst[k] = bitmap1[k] ^ bitmap2[k];
}
EXPORT_SYMBOL(__bitmap_xor);

bool __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
                                const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k;
        unsigned int lim = bits/BITS_PER_LONG;
        unsigned long result = 0;

        for (k = 0; k < lim; k++)
                result |= (dst[k] = bitmap1[k] & ~bitmap2[k]);
        if (bits % BITS_PER_LONG)
                result |= (dst[k] = bitmap1[k] & ~bitmap2[k] &
                           BITMAP_LAST_WORD_MASK(bits));
        return result != 0;
}
EXPORT_SYMBOL(__bitmap_andnot);

void __bitmap_replace(unsigned long *dst,
                      const unsigned long *old, const unsigned long *new,
                      const unsigned long *mask, unsigned int nbits)
{
        unsigned int k;
        unsigned int nr = BITS_TO_LONGS(nbits);

        for (k = 0; k < nr; k++)
                dst[k] = (old[k] & ~mask[k]) | (new[k] & mask[k]);
}
EXPORT_SYMBOL(__bitmap_replace);

bool __bitmap_intersects(const unsigned long *bitmap1,
                         const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k, lim = bits/BITS_PER_LONG;
        for (k = 0; k < lim; ++k)
                if (bitmap1[k] & bitmap2[k])
                        return true;

        if (bits % BITS_PER_LONG)
                if ((bitmap1[k] & bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
                        return true;
        return false;
}
EXPORT_SYMBOL(__bitmap_intersects);

bool __bitmap_subset(const unsigned long *bitmap1,
                     const unsigned long *bitmap2, unsigned int bits)
{
        unsigned int k, lim = bits/BITS_PER_LONG;
        for (k = 0; k < lim; ++k)
                if (bitmap1[k] & ~bitmap2[k])
                        return false;

        if (bits % BITS_PER_LONG)
                if ((bitmap1[k] & ~bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
                        return false;
        return true;
}
EXPORT_SYMBOL(__bitmap_subset);

#define BITMAP_WEIGHT(FETCH, bits)      \
({                                                                              \
        unsigned int __bits = (bits), idx, w = 0;                               \
                                                                                \
        for (idx = 0; idx < __bits / BITS_PER_LONG; idx++)                      \
                w += hweight_long(FETCH);                                       \
                                                                                \
        if (__bits % BITS_PER_LONG)                                             \
                w += hweight_long((FETCH) & BITMAP_LAST_WORD_MASK(__bits));     \
                                                                                \
        w;                                                                      \
})

unsigned int __bitmap_weight(const unsigned long *bitmap, unsigned int bits)
{
        return BITMAP_WEIGHT(bitmap[idx], bits);
}
EXPORT_SYMBOL(__bitmap_weight);

unsigned int __bitmap_weight_and(const unsigned long *bitmap1,
                                const unsigned long *bitmap2, unsigned int bits)
{
        return BITMAP_WEIGHT(bitmap1[idx] & bitmap2[idx], bits);
}
EXPORT_SYMBOL(__bitmap_weight_and);

void __bitmap_set(unsigned long *map, unsigned int start, int len)
{
        unsigned long *p = map + BIT_WORD(start);
        const unsigned int size = start + len;
        int bits_to_set = BITS_PER_LONG - (start % BITS_PER_LONG);
        unsigned long mask_to_set = BITMAP_FIRST_WORD_MASK(start);

        while (len - bits_to_set >= 0) {
                *p |= mask_to_set;
                len -= bits_to_set;
                bits_to_set = BITS_PER_LONG;
                mask_to_set = ~0UL;
                p++;
        }
        if (len) {
                mask_to_set &= BITMAP_LAST_WORD_MASK(size);
                *p |= mask_to_set;
        }
}
EXPORT_SYMBOL(__bitmap_set);

void __bitmap_clear(unsigned long *map, unsigned int start, int len)
{
        unsigned long *p = map + BIT_WORD(start);
        const unsigned int size = start + len;
        int bits_to_clear = BITS_PER_LONG - (start % BITS_PER_LONG);
        unsigned long mask_to_clear = BITMAP_FIRST_WORD_MASK(start);

        while (len - bits_to_clear >= 0) {
                *p &= ~mask_to_clear;
                len -= bits_to_clear;
                bits_to_clear = BITS_PER_LONG;
                mask_to_clear = ~0UL;
                p++;
        }
        if (len) {
                mask_to_clear &= BITMAP_LAST_WORD_MASK(size);
                *p &= ~mask_to_clear;
        }
}
EXPORT_SYMBOL(__bitmap_clear);

/**
 * bitmap_find_next_zero_area_off - find a contiguous aligned zero area
 * @map: The address to base the search on
 * @size: The bitmap size in bits
 * @start: The bitnumber to start searching at
 * @nr: The number of zeroed bits we're looking for
 * @align_mask: Alignment mask for zero area
 * @align_offset: Alignment offset for zero area.
 *
 * The @align_mask should be one less than a power of 2; the effect is that
 * the bit offset of all zero areas this function finds plus @align_offset
 * is multiple of that power of 2.
 */
unsigned long bitmap_find_next_zero_area_off(unsigned long *map,
                                             unsigned long size,
                                             unsigned long start,
                                             unsigned int nr,
                                             unsigned long align_mask,
                                             unsigned long align_offset)
{
        unsigned long index, end, i;
again:
        index = find_next_zero_bit(map, size, start);

        /* Align allocation */
        index = __ALIGN_MASK(index + align_offset, align_mask) - align_offset;

        end = index + nr;
        if (end > size)
                return end;
        i = find_next_bit(map, end, index);
        if (i < end) {
                start = i + 1;
                goto again;
        }
        return index;
}
EXPORT_SYMBOL(bitmap_find_next_zero_area_off);

/*
 * Bitmap printing & parsing functions: first version by Nadia Yvette Chambers,
 * second version by Paul Jackson, third by Joe Korty.
 */

/**
 * bitmap_parse_user - convert an ASCII hex string in a user buffer into a bitmap
 *
 * @ubuf: pointer to user buffer containing string.
 * @ulen: buffer size in bytes.  If string is smaller than this
 *    then it must be terminated with a \0.
 * @maskp: pointer to bitmap array that will contain result.
 * @nmaskbits: size of bitmap, in bits.
 */
int bitmap_parse_user(const char __user *ubuf,
                        unsigned int ulen, unsigned long *maskp,
                        int nmaskbits)
{
        char *buf;
        int ret;

        buf = memdup_user_nul(ubuf, ulen);
        if (IS_ERR(buf))
                return PTR_ERR(buf);

        ret = bitmap_parse(buf, UINT_MAX, maskp, nmaskbits);

        kfree(buf);
        return ret;
}
EXPORT_SYMBOL(bitmap_parse_user);

/**
 * bitmap_print_to_pagebuf - convert bitmap to list or hex format ASCII string
 * @list: indicates whether the bitmap must be list
 * @buf: page aligned buffer into which string is placed
 * @maskp: pointer to bitmap to convert
 * @nmaskbits: size of bitmap, in bits
 *
 * Output format is a comma-separated list of decimal numbers and
 * ranges if list is specified or hex digits grouped into comma-separated
 * sets of 8 digits/set. Returns the number of characters written to buf.
 *
 * It is assumed that @buf is a pointer into a PAGE_SIZE, page-aligned
 * area and that sufficient storage remains at @buf to accommodate the
 * bitmap_print_to_pagebuf() output. Returns the number of characters
 * actually printed to @buf, excluding terminating '\0'.
 */
int bitmap_print_to_pagebuf(bool list, char *buf, const unsigned long *maskp,
                            int nmaskbits)
{
        ptrdiff_t len = PAGE_SIZE - offset_in_page(buf);

        return list ? scnprintf(buf, len, "%*pbl\n", nmaskbits, maskp) :
                      scnprintf(buf, len, "%*pb\n", nmaskbits, maskp);
}
EXPORT_SYMBOL(bitmap_print_to_pagebuf);

/**
 * bitmap_print_to_buf  - convert bitmap to list or hex format ASCII string
 * @list: indicates whether the bitmap must be list
 *      true:  print in decimal list format
 *      false: print in hexadecimal bitmask format
 * @buf: buffer into which string is placed
 * @maskp: pointer to bitmap to convert
 * @nmaskbits: size of bitmap, in bits
 * @off: in the string from which we are copying, We copy to @buf
 * @count: the maximum number of bytes to print
 */
static int bitmap_print_to_buf(bool list, char *buf, const unsigned long *maskp,
                int nmaskbits, loff_t off, size_t count)
{
        const char *fmt = list ? "%*pbl\n" : "%*pb\n";
        ssize_t size;
        void *data;

        data = kasprintf(GFP_KERNEL, fmt, nmaskbits, maskp);
        if (!data)
                return -ENOMEM;

        size = memory_read_from_buffer(buf, count, &off, data, strlen(data) + 1);
        kfree(data);

        return size;
}

/**
 * bitmap_print_bitmask_to_buf  - convert bitmap to hex bitmask format ASCII string
 * @buf: buffer into which string is placed
 * @maskp: pointer to bitmap to convert
 * @nmaskbits: size of bitmap, in bits
 * @off: in the string from which we are copying, We copy to @buf
 * @count: the maximum number of bytes to print
 *
 * The bitmap_print_to_pagebuf() is used indirectly via its cpumap wrapper
 * cpumap_print_to_pagebuf() or directly by drivers to export hexadecimal
 * bitmask and decimal list to userspace by sysfs ABI.
 * Drivers might be using a normal attribute for this kind of ABIs. A
 * normal attribute typically has show entry as below::
 *
 *   static ssize_t example_attribute_show(struct device *dev,
 *              struct device_attribute *attr, char *buf)
 *   {
 *      ...
 *      return bitmap_print_to_pagebuf(true, buf, &mask, nr_trig_max);
 *   }
 *
 * show entry of attribute has no offset and count parameters and this
 * means the file is limited to one page only.
 * bitmap_print_to_pagebuf() API works terribly well for this kind of
 * normal attribute with buf parameter and without offset, count::
 *
 *   bitmap_print_to_pagebuf(bool list, char *buf, const unsigned long *maskp,
 *                         int nmaskbits)
 *   {
 *   }
 *
 * The problem is once we have a large bitmap, we have a chance to get a
 * bitmask or list more than one page. Especially for list, it could be
 * as complex as 0,3,5,7,9,... We have no simple way to know it exact size.
 * It turns out bin_attribute is a way to break this limit. bin_attribute
 * has show entry as below::
 *
 *   static ssize_t
 *   example_bin_attribute_show(struct file *filp, struct kobject *kobj,
 *              struct bin_attribute *attr, char *buf,
 *              loff_t offset, size_t count)
 *   {
 *      ...
 *   }
 *
 * With the new offset and count parameters, this makes sysfs ABI be able
 * to support file size more than one page. For example, offset could be
 * >= 4096.
 * bitmap_print_bitmask_to_buf(), bitmap_print_list_to_buf() wit their
 * cpumap wrapper cpumap_print_bitmask_to_buf(), cpumap_print_list_to_buf()
 * make those drivers be able to support large bitmask and list after they
 * move to use bin_attribute. In result, we have to pass the corresponding
 * parameters such as off, count from bin_attribute show entry to this API.
 *
 * The role of cpumap_print_bitmask_to_buf() and cpumap_print_list_to_buf()
 * is similar with cpumap_print_to_pagebuf(),  the difference is that
 * bitmap_print_to_pagebuf() mainly serves sysfs attribute with the assumption
 * the destination buffer is exactly one page and won't be more than one page.
 * cpumap_print_bitmask_to_buf() and cpumap_print_list_to_buf(), on the other
 * hand, mainly serves bin_attribute which doesn't work with exact one page,
 * and it can break the size limit of converted decimal list and hexadecimal
 * bitmask.
 *
 * WARNING!
 *
 * This function is not a replacement for sprintf() or bitmap_print_to_pagebuf().
 * It is intended to workaround sysfs limitations discussed above and should be
 * used carefully in general case for the following reasons:
 *
 *  - Time complexity is O(nbits^2/count), comparing to O(nbits) for snprintf().
 *  - Memory complexity is O(nbits), comparing to O(1) for snprintf().
 *  - @off and @count are NOT offset and number of bits to print.
 *  - If printing part of bitmap as list, the resulting string is not a correct
 *    list representation of bitmap. Particularly, some bits within or out of
 *    related interval may be erroneously set or unset. The format of the string
 *    may be broken, so bitmap_parselist-like parser may fail parsing it.
 *  - If printing the whole bitmap as list by parts, user must ensure the order
 *    of calls of the function such that the offset is incremented linearly.
 *  - If printing the whole bitmap as list by parts, user must keep bitmap
 *    unchanged between the very first and very last call. Otherwise concatenated
 *    result may be incorrect, and format may be broken.
 *
 * Returns the number of characters actually printed to @buf
 */
int bitmap_print_bitmask_to_buf(char *buf, const unsigned long *maskp,
                                int nmaskbits, loff_t off, size_t count)
{
        return bitmap_print_to_buf(false, buf, maskp, nmaskbits, off, count);
}
EXPORT_SYMBOL(bitmap_print_bitmask_to_buf);

/**
 * bitmap_print_list_to_buf  - convert bitmap to decimal list format ASCII string
 * @buf: buffer into which string is placed
 * @maskp: pointer to bitmap to convert
 * @nmaskbits: size of bitmap, in bits
 * @off: in the string from which we are copying, We copy to @buf
 * @count: the maximum number of bytes to print
 *
 * Everything is same with the above bitmap_print_bitmask_to_buf() except
 * the print format.
 */
int bitmap_print_list_to_buf(char *buf, const unsigned long *maskp,
                             int nmaskbits, loff_t off, size_t count)
{
        return bitmap_print_to_buf(true, buf, maskp, nmaskbits, off, count);
}
EXPORT_SYMBOL(bitmap_print_list_to_buf);

/*
 * Region 9-38:4/10 describes the following bitmap structure:
 * 0       9  12    18                  38           N
 * .........****......****......****..................
 *          ^  ^     ^                   ^           ^
 *      start  off   group_len         end       nbits
 */
struct region {
        unsigned int start;
        unsigned int off;
        unsigned int group_len;
        unsigned int end;
        unsigned int nbits;
};

static void bitmap_set_region(const struct region *r, unsigned long *bitmap)
{
        unsigned int start;

        for (start = r->start; start <= r->end; start += r->group_len)
                bitmap_set(bitmap, start, min(r->end - start + 1, r->off));
}

static int bitmap_check_region(const struct region *r)
{
        if (r->start > r->end || r->group_len == 0 || r->off > r->group_len)
                return -EINVAL;

        if (r->end >= r->nbits)
                return -ERANGE;

        return 0;
}

static const char *bitmap_getnum(const char *str, unsigned int *num,
                                 unsigned int lastbit)
{
        unsigned long long n;
        unsigned int len;

        if (str[0] == 'N') {
                *num = lastbit;
                return str + 1;
        }

        len = _parse_integer(str, 10, &n);
        if (!len)
                return ERR_PTR(-EINVAL);
        if (len & KSTRTOX_OVERFLOW || n != (unsigned int)n)
                return ERR_PTR(-EOVERFLOW);

        *num = n;
        return str + len;
}

static inline bool end_of_str(char c)
{
        return c == '\0' || c == '\n';
}

static inline bool __end_of_region(char c)
{
        return isspace(c) || c == ',';
}

static inline bool end_of_region(char c)
{
        return __end_of_region(c) || end_of_str(c);
}

/*
 * The format allows commas and whitespaces at the beginning
 * of the region.
 */
static const char *bitmap_find_region(const char *str)
{
        while (__end_of_region(*str))
                str++;

        return end_of_str(*str) ? NULL : str;
}

static const char *bitmap_find_region_reverse(const char *start, const char *end)
{
        while (start <= end && __end_of_region(*end))
                end--;

        return end;
}

static const char *bitmap_parse_region(const char *str, struct region *r)
{
        unsigned int lastbit = r->nbits - 1;

        if (!strncasecmp(str, "all", 3)) {
                r->start = 0;
                r->end = lastbit;
                str += 3;

                goto check_pattern;
        }

        str = bitmap_getnum(str, &r->start, lastbit);
        if (IS_ERR(str))
                return str;

        if (end_of_region(*str))
                goto no_end;

        if (*str != '-')
                return ERR_PTR(-EINVAL);

        str = bitmap_getnum(str + 1, &r->end, lastbit);
        if (IS_ERR(str))
                return str;

check_pattern:
        if (end_of_region(*str))
                goto no_pattern;

        if (*str != ':')
                return ERR_PTR(-EINVAL);

        str = bitmap_getnum(str + 1, &r->off, lastbit);
        if (IS_ERR(str))
                return str;

        if (*str != '/')
                return ERR_PTR(-EINVAL);

        return bitmap_getnum(str + 1, &r->group_len, lastbit);

no_end:
        r->end = r->start;
no_pattern:
        r->off = r->end + 1;
        r->group_len = r->end + 1;

        return end_of_str(*str) ? NULL : str;
}

/**
 * bitmap_parselist - convert list format ASCII string to bitmap
 * @buf: read user string from this buffer; must be terminated
 *    with a \0 or \n.
 * @maskp: write resulting mask here
 * @nmaskbits: number of bits in mask to be written
 *
 * Input format is a comma-separated list of decimal numbers and
 * ranges.  Consecutively set bits are shown as two hyphen-separated
 * decimal numbers, the smallest and largest bit numbers set in
 * the range.
 * Optionally each range can be postfixed to denote that only parts of it
 * should be set. The range will divided to groups of specific size.
 * From each group will be used only defined amount of bits.
 * Syntax: range:used_size/group_size
 * Example: 0-1023:2/256 ==> 0,1,256,257,512,513,768,769
 * The value 'N' can be used as a dynamically substituted token for the
 * maximum allowed value; i.e (nmaskbits - 1).  Keep in mind that it is
 * dynamic, so if system changes cause the bitmap width to change, such
 * as more cores in a CPU list, then any ranges using N will also change.
 *
 * Returns: 0 on success, -errno on invalid input strings. Error values:
 *
 *   - ``-EINVAL``: wrong region format
 *   - ``-EINVAL``: invalid character in string
 *   - ``-ERANGE``: bit number specified too large for mask
 *   - ``-EOVERFLOW``: integer overflow in the input parameters
 */
int bitmap_parselist(const char *buf, unsigned long *maskp, int nmaskbits)
{
        struct region r;
        long ret;

        r.nbits = nmaskbits;
        bitmap_zero(maskp, r.nbits);

        while (buf) {
                buf = bitmap_find_region(buf);
                if (buf == NULL)
                        return 0;

                buf = bitmap_parse_region(buf, &r);
                if (IS_ERR(buf))
                        return PTR_ERR(buf);

                ret = bitmap_check_region(&r);
                if (ret)
                        return ret;

                bitmap_set_region(&r, maskp);
        }

        return 0;
}
EXPORT_SYMBOL(bitmap_parselist);


/**
 * bitmap_parselist_user() - convert user buffer's list format ASCII
 * string to bitmap
 *
 * @ubuf: pointer to user buffer containing string.
 * @ulen: buffer size in bytes.  If string is smaller than this
 *    then it must be terminated with a \0.
 * @maskp: pointer to bitmap array that will contain result.
 * @nmaskbits: size of bitmap, in bits.
 *
 * Wrapper for bitmap_parselist(), providing it with user buffer.
 */
int bitmap_parselist_user(const char __user *ubuf,
                        unsigned int ulen, unsigned long *maskp,
                        int nmaskbits)
{
        char *buf;
        int ret;

        buf = memdup_user_nul(ubuf, ulen);
        if (IS_ERR(buf))
                return PTR_ERR(buf);

        ret = bitmap_parselist(buf, maskp, nmaskbits);

        kfree(buf);
        return ret;
}
EXPORT_SYMBOL(bitmap_parselist_user);

static const char *bitmap_get_x32_reverse(const char *start,
                                        const char *end, u32 *num)
{
        u32 ret = 0;
        int c, i;

        for (i = 0; i < 32; i += 4) {
                c = hex_to_bin(*end--);
                if (c < 0)
                        return ERR_PTR(-EINVAL);

                ret |= c << i;

                if (start > end || __end_of_region(*end))
                        goto out;
        }

        if (hex_to_bin(*end--) >= 0)
                return ERR_PTR(-EOVERFLOW);
out:
        *num = ret;
        return end;
}

/**
 * bitmap_parse - convert an ASCII hex string into a bitmap.
 * @start: pointer to buffer containing string.
 * @buflen: buffer size in bytes.  If string is smaller than this
 *    then it must be terminated with a \0 or \n. In that case,
 *    UINT_MAX may be provided instead of string length.
 * @maskp: pointer to bitmap array that will contain result.
 * @nmaskbits: size of bitmap, in bits.
 *
 * Commas group hex digits into chunks.  Each chunk defines exactly 32
 * bits of the resultant bitmask.  No chunk may specify a value larger
 * than 32 bits (%-EOVERFLOW), and if a chunk specifies a smaller value
 * then leading 0-bits are prepended.  %-EINVAL is returned for illegal
 * characters. Grouping such as "1,,5", ",44", "," or "" is allowed.
 * Leading, embedded and trailing whitespace accepted.
 */
int bitmap_parse(const char *start, unsigned int buflen,
                unsigned long *maskp, int nmaskbits)
{
        const char *end = strnchrnul(start, buflen, '\n') - 1;
        int chunks = BITS_TO_U32(nmaskbits);
        u32 *bitmap = (u32 *)maskp;
        int unset_bit;
        int chunk;

        for (chunk = 0; ; chunk++) {
                end = bitmap_find_region_reverse(start, end);
                if (start > end)
                        break;

                if (!chunks--)
                        return -EOVERFLOW;

#if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
                end = bitmap_get_x32_reverse(start, end, &bitmap[chunk ^ 1]);
#else
                end = bitmap_get_x32_reverse(start, end, &bitmap[chunk]);
#endif
                if (IS_ERR(end))
                        return PTR_ERR(end);
        }

        unset_bit = (BITS_TO_U32(nmaskbits) - chunks) * 32;
        if (unset_bit < nmaskbits) {
                bitmap_clear(maskp, unset_bit, nmaskbits - unset_bit);
                return 0;
        }

        if (find_next_bit(maskp, unset_bit, nmaskbits) != unset_bit)
                return -EOVERFLOW;

        return 0;
}
EXPORT_SYMBOL(bitmap_parse);

/**
 * bitmap_pos_to_ord - find ordinal of set bit at given position in bitmap
 *      @buf: pointer to a bitmap
 *      @pos: a bit position in @buf (0 <= @pos < @nbits)
 *      @nbits: number of valid bit positions in @buf
 *
 * Map the bit at position @pos in @buf (of length @nbits) to the
 * ordinal of which set bit it is.  If it is not set or if @pos
 * is not a valid bit position, map to -1.
 *
 * If for example, just bits 4 through 7 are set in @buf, then @pos
 * values 4 through 7 will get mapped to 0 through 3, respectively,
 * and other @pos values will get mapped to -1.  When @pos value 7
 * gets mapped to (returns) @ord value 3 in this example, that means
 * that bit 7 is the 3rd (starting with 0th) set bit in @buf.
 *
 * The bit positions 0 through @bits are valid positions in @buf.
 */
static int bitmap_pos_to_ord(const unsigned long *buf, unsigned int pos, unsigned int nbits)
{
        if (pos >= nbits || !test_bit(pos, buf))
                return -1;

        return bitmap_weight(buf, pos);
}

/**
 * bitmap_remap - Apply map defined by a pair of bitmaps to another bitmap
 *      @dst: remapped result
 *      @src: subset to be remapped
 *      @old: defines domain of map
 *      @new: defines range of map
 *      @nbits: number of bits in each of these bitmaps
 *
 * Let @old and @new define a mapping of bit positions, such that
 * whatever position is held by the n-th set bit in @old is mapped
 * to the n-th set bit in @new.  In the more general case, allowing
 * for the possibility that the weight 'w' of @new is less than the
 * weight of @old, map the position of the n-th set bit in @old to
 * the position of the m-th set bit in @new, where m == n % w.
 *
 * If either of the @old and @new bitmaps are empty, or if @src and
 * @dst point to the same location, then this routine copies @src
 * to @dst.
 *
 * The positions of unset bits in @old are mapped to themselves
 * (the identify map).
 *
 * Apply the above specified mapping to @src, placing the result in
 * @dst, clearing any bits previously set in @dst.
 *
 * For example, lets say that @old has bits 4 through 7 set, and
 * @new has bits 12 through 15 set.  This defines the mapping of bit
 * position 4 to 12, 5 to 13, 6 to 14 and 7 to 15, and of all other
 * bit positions unchanged.  So if say @src comes into this routine
 * with bits 1, 5 and 7 set, then @dst should leave with bits 1,
 * 13 and 15 set.
 */
void bitmap_remap(unsigned long *dst, const unsigned long *src,
                const unsigned long *old, const unsigned long *new,
                unsigned int nbits)
{
        unsigned int oldbit, w;

        if (dst == src)         /* following doesn't handle inplace remaps */
                return;
        bitmap_zero(dst, nbits);

        w = bitmap_weight(new, nbits);
        for_each_set_bit(oldbit, src, nbits) {
                int n = bitmap_pos_to_ord(old, oldbit, nbits);

                if (n < 0 || w == 0)
                        set_bit(oldbit, dst);   /* identity map */
                else
                        set_bit(find_nth_bit(new, nbits, n % w), dst);
        }
}
EXPORT_SYMBOL(bitmap_remap);

/**
 * bitmap_bitremap - Apply map defined by a pair of bitmaps to a single bit
 *      @oldbit: bit position to be mapped
 *      @old: defines domain of map
 *      @new: defines range of map
 *      @bits: number of bits in each of these bitmaps
 *
 * Let @old and @new define a mapping of bit positions, such that
 * whatever position is held by the n-th set bit in @old is mapped
 * to the n-th set bit in @new.  In the more general case, allowing
 * for the possibility that the weight 'w' of @new is less than the
 * weight of @old, map the position of the n-th set bit in @old to
 * the position of the m-th set bit in @new, where m == n % w.
 *
 * The positions of unset bits in @old are mapped to themselves
 * (the identify map).
 *
 * Apply the above specified mapping to bit position @oldbit, returning
 * the new bit position.
 *
 * For example, lets say that @old has bits 4 through 7 set, and
 * @new has bits 12 through 15 set.  This defines the mapping of bit
 * position 4 to 12, 5 to 13, 6 to 14 and 7 to 15, and of all other
 * bit positions unchanged.  So if say @oldbit is 5, then this routine
 * returns 13.
 */
int bitmap_bitremap(int oldbit, const unsigned long *old,
                                const unsigned long *new, int bits)
{
        int w = bitmap_weight(new, bits);
        int n = bitmap_pos_to_ord(old, oldbit, bits);
        if (n < 0 || w == 0)
                return oldbit;
        else
                return find_nth_bit(new, bits, n % w);
}
EXPORT_SYMBOL(bitmap_bitremap);

#ifdef CONFIG_NUMA
/**
 * bitmap_onto - translate one bitmap relative to another
 *      @dst: resulting translated bitmap
 *      @orig: original untranslated bitmap
 *      @relmap: bitmap relative to which translated
 *      @bits: number of bits in each of these bitmaps
 *
 * Set the n-th bit of @dst iff there exists some m such that the
 * n-th bit of @relmap is set, the m-th bit of @orig is set, and
 * the n-th bit of @relmap is also the m-th _set_ bit of @relmap.
 * (If you understood the previous sentence the first time your
 * read it, you're overqualified for your current job.)
 *
 * In other words, @orig is mapped onto (surjectively) @dst,
 * using the map { <n, m> | the n-th bit of @relmap is the
 * m-th set bit of @relmap }.
 *
 * Any set bits in @orig above bit number W, where W is the
 * weight of (number of set bits in) @relmap are mapped nowhere.
 * In particular, if for all bits m set in @orig, m >= W, then
 * @dst will end up empty.  In situations where the possibility
 * of such an empty result is not desired, one way to avoid it is
 * to use the bitmap_fold() operator, below, to first fold the
 * @orig bitmap over itself so that all its set bits x are in the
 * range 0 <= x < W.  The bitmap_fold() operator does this by
 * setting the bit (m % W) in @dst, for each bit (m) set in @orig.
 *
 * Example [1] for bitmap_onto():
 *  Let's say @relmap has bits 30-39 set, and @orig has bits
 *  1, 3, 5, 7, 9 and 11 set.  Then on return from this routine,
 *  @dst will have bits 31, 33, 35, 37 and 39 set.
 *
 *  When bit 0 is set in @orig, it means turn on the bit in
 *  @dst corresponding to whatever is the first bit (if any)
 *  that is turned on in @relmap.  Since bit 0 was off in the
 *  above example, we leave off that bit (bit 30) in @dst.
 *
 *  When bit 1 is set in @orig (as in the above example), it
 *  means turn on the bit in @dst corresponding to whatever
 *  is the second bit that is turned on in @relmap.  The second
 *  bit in @relmap that was turned on in the above example was
 *  bit 31, so we turned on bit 31 in @dst.
 *
 *  Similarly, we turned on bits 33, 35, 37 and 39 in @dst,
 *  because they were the 4th, 6th, 8th and 10th set bits
 *  set in @relmap, and the 4th, 6th, 8th and 10th bits of
 *  @orig (i.e. bits 3, 5, 7 and 9) were also set.
 *
 *  When bit 11 is set in @orig, it means turn on the bit in
 *  @dst corresponding to whatever is the twelfth bit that is
 *  turned on in @relmap.  In the above example, there were
 *  only ten bits turned on in @relmap (30..39), so that bit
 *  11 was set in @orig had no affect on @dst.
 *
 * Example [2] for bitmap_fold() + bitmap_onto():
 *  Let's say @relmap has these ten bits set::
 *
 *              40 41 42 43 45 48 53 61 74 95
 *
 *  (for the curious, that's 40 plus the first ten terms of the
 *  Fibonacci sequence.)
 *
 *  Further lets say we use the following code, invoking
 *  bitmap_fold() then bitmap_onto, as suggested above to
 *  avoid the possibility of an empty @dst result::
 *
 *      unsigned long *tmp;     // a temporary bitmap's bits
 *
 *      bitmap_fold(tmp, orig, bitmap_weight(relmap, bits), bits);
 *      bitmap_onto(dst, tmp, relmap, bits);
 *
 *  Then this table shows what various values of @dst would be, for
 *  various @orig's.  I list the zero-based positions of each set bit.
 *  The tmp column shows the intermediate result, as computed by
 *  using bitmap_fold() to fold the @orig bitmap modulo ten
 *  (the weight of @relmap):
 *
 *      =============== ============== =================
 *      @orig           tmp            @dst
 *      0                0             40
 *      1                1             41
 *      9                9             95
 *      10               0             40 [#f1]_
 *      1 3 5 7          1 3 5 7       41 43 48 61
 *      0 1 2 3 4        0 1 2 3 4     40 41 42 43 45
 *      0 9 18 27        0 9 8 7       40 61 74 95
 *      0 10 20 30       0             40
 *      0 11 22 33       0 1 2 3       40 41 42 43
 *      0 12 24 36       0 2 4 6       40 42 45 53
 *      78 102 211       1 2 8         41 42 74 [#f1]_
 *      =============== ============== =================
 *
 * .. [#f1]
 *
 *     For these marked lines, if we hadn't first done bitmap_fold()
 *     into tmp, then the @dst result would have been empty.
 *
 * If either of @orig or @relmap is empty (no set bits), then @dst
 * will be returned empty.
 *
 * If (as explained above) the only set bits in @orig are in positions
 * m where m >= W, (where W is the weight of @relmap) then @dst will
 * once again be returned empty.
 *
 * All bits in @dst not set by the above rule are cleared.
 */
void bitmap_onto(unsigned long *dst, const unsigned long *orig,
                        const unsigned long *relmap, unsigned int bits)
{
        unsigned int n, m;      /* same meaning as in above comment */

        if (dst == orig)        /* following doesn't handle inplace mappings */
                return;
        bitmap_zero(dst, bits);

        /*
         * The following code is a more efficient, but less
         * obvious, equivalent to the loop:
         *      for (m = 0; m < bitmap_weight(relmap, bits); m++) {
         *              n = find_nth_bit(orig, bits, m);
         *              if (test_bit(m, orig))
         *                      set_bit(n, dst);
         *      }
         */

        m = 0;
        for_each_set_bit(n, relmap, bits) {
                /* m == bitmap_pos_to_ord(relmap, n, bits) */
                if (test_bit(m, orig))
                        set_bit(n, dst);
                m++;
        }
}

/**
 * bitmap_fold - fold larger bitmap into smaller, modulo specified size
 *      @dst: resulting smaller bitmap
 *      @orig: original larger bitmap
 *      @sz: specified size
 *      @nbits: number of bits in each of these bitmaps
 *
 * For each bit oldbit in @orig, set bit oldbit mod @sz in @dst.
 * Clear all other bits in @dst.  See further the comment and
 * Example [2] for bitmap_onto() for why and how to use this.
 */
void bitmap_fold(unsigned long *dst, const unsigned long *orig,
                        unsigned int sz, unsigned int nbits)
{
        unsigned int oldbit;

        if (dst == orig)        /* following doesn't handle inplace mappings */
                return;
        bitmap_zero(dst, nbits);

        for_each_set_bit(oldbit, orig, nbits)
                set_bit(oldbit % sz, dst);
}
#endif /* CONFIG_NUMA */

/*
 * Common code for bitmap_*_region() routines.
 *      bitmap: array of unsigned longs corresponding to the bitmap
 *      pos: the beginning of the region
 *      order: region size (log base 2 of number of bits)
 *      reg_op: operation(s) to perform on that region of bitmap
 *
 * Can set, verify and/or release a region of bits in a bitmap,
 * depending on which combination of REG_OP_* flag bits is set.
 *
 * A region of a bitmap is a sequence of bits in the bitmap, of
 * some size '1 << order' (a power of two), aligned to that same
 * '1 << order' power of two.
 *
 * Returns 1 if REG_OP_ISFREE succeeds (region is all zero bits).
 * Returns 0 in all other cases and reg_ops.
 */

enum {
        REG_OP_ISFREE,          /* true if region is all zero bits */
        REG_OP_ALLOC,           /* set all bits in region */
        REG_OP_RELEASE,         /* clear all bits in region */
};

static int __reg_op(unsigned long *bitmap, unsigned int pos, int order, int reg_op)
{
        int nbits_reg;          /* number of bits in region */
        int index;              /* index first long of region in bitmap */
        int offset;             /* bit offset region in bitmap[index] */
        int nlongs_reg;         /* num longs spanned by region in bitmap */
        int nbitsinlong;        /* num bits of region in each spanned long */
        unsigned long mask;     /* bitmask for one long of region */
        int i;                  /* scans bitmap by longs */
        int ret = 0;            /* return value */

        /*
         * Either nlongs_reg == 1 (for small orders that fit in one long)
         * or (offset == 0 && mask == ~0UL) (for larger multiword orders.)
         */
        nbits_reg = 1 << order;
        index = pos / BITS_PER_LONG;
        offset = pos - (index * BITS_PER_LONG);
        nlongs_reg = BITS_TO_LONGS(nbits_reg);
        nbitsinlong = min(nbits_reg,  BITS_PER_LONG);

        /*
         * Can't do "mask = (1UL << nbitsinlong) - 1", as that
         * overflows if nbitsinlong == BITS_PER_LONG.
         */
        mask = (1UL << (nbitsinlong - 1));
        mask += mask - 1;
        mask <<= offset;

        switch (reg_op) {
        case REG_OP_ISFREE:
                for (i = 0; i < nlongs_reg; i++) {
                        if (bitmap[index + i] & mask)
                                goto done;
                }
                ret = 1;        /* all bits in region free (zero) */
                break;

        case REG_OP_ALLOC:
                for (i = 0; i < nlongs_reg; i++)
                        bitmap[index + i] |= mask;
                break;

        case REG_OP_RELEASE:
                for (i = 0; i < nlongs_reg; i++)
                        bitmap[index + i] &= ~mask;
                break;
        }
done:
        return ret;
}

/**
 * bitmap_find_free_region - find a contiguous aligned mem region
 *      @bitmap: array of unsigned longs corresponding to the bitmap
 *      @bits: number of bits in the bitmap
 *      @order: region size (log base 2 of number of bits) to find
 *
 * Find a region of free (zero) bits in a @bitmap of @bits bits and
 * allocate them (set them to one).  Only consider regions of length
 * a power (@order) of two, aligned to that power of two, which
 * makes the search algorithm much faster.
 *
 * Return the bit offset in bitmap of the allocated region,
 * or -errno on failure.
 */
int bitmap_find_free_region(unsigned long *bitmap, unsigned int bits, int order)
{
        unsigned int pos, end;          /* scans bitmap by regions of size order */

        for (pos = 0 ; (end = pos + (1U << order)) <= bits; pos = end) {
                if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE))
                        continue;
                __reg_op(bitmap, pos, order, REG_OP_ALLOC);
                return pos;
        }
        return -ENOMEM;
}
EXPORT_SYMBOL(bitmap_find_free_region);

/**
 * bitmap_release_region - release allocated bitmap region
 *      @bitmap: array of unsigned longs corresponding to the bitmap
 *      @pos: beginning of bit region to release
 *      @order: region size (log base 2 of number of bits) to release
 *
 * This is the complement to __bitmap_find_free_region() and releases
 * the found region (by clearing it in the bitmap).
 *
 * No return value.
 */
void bitmap_release_region(unsigned long *bitmap, unsigned int pos, int order)
{
        __reg_op(bitmap, pos, order, REG_OP_RELEASE);
}
EXPORT_SYMBOL(bitmap_release_region);

/**
 * bitmap_allocate_region - allocate bitmap region
 *      @bitmap: array of unsigned longs corresponding to the bitmap
 *      @pos: beginning of bit region to allocate
 *      @order: region size (log base 2 of number of bits) to allocate
 *
 * Allocate (set bits in) a specified region of a bitmap.
 *
 * Return 0 on success, or %-EBUSY if specified region wasn't
 * free (not all bits were zero).
 */
int bitmap_allocate_region(unsigned long *bitmap, unsigned int pos, int order)
{
        if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE))
                return -EBUSY;
        return __reg_op(bitmap, pos, order, REG_OP_ALLOC);
}
EXPORT_SYMBOL(bitmap_allocate_region);

/**
 * bitmap_copy_le - copy a bitmap, putting the bits into little-endian order.
 * @dst:   destination buffer
 * @src:   bitmap to copy
 * @nbits: number of bits in the bitmap
 *
 * Require nbits % BITS_PER_LONG == 0.
 */
#ifdef __BIG_ENDIAN
void bitmap_copy_le(unsigned long *dst, const unsigned long *src, unsigned int nbits)
{
        unsigned int i;

        for (i = 0; i < nbits/BITS_PER_LONG; i++) {
                if (BITS_PER_LONG == 64)
                        dst[i] = cpu_to_le64(src[i]);
                else
                        dst[i] = cpu_to_le32(src[i]);
        }
}
EXPORT_SYMBOL(bitmap_copy_le);
#endif

unsigned long *bitmap_alloc(unsigned int nbits, gfp_t flags)
{
        return kmalloc_array(BITS_TO_LONGS(nbits), sizeof(unsigned long),
                             flags);
}
EXPORT_SYMBOL(bitmap_alloc);

unsigned long *bitmap_zalloc(unsigned int nbits, gfp_t flags)
{
        return bitmap_alloc(nbits, flags | __GFP_ZERO);
}
EXPORT_SYMBOL(bitmap_zalloc);

unsigned long *bitmap_alloc_node(unsigned int nbits, gfp_t flags, int node)
{
        return kmalloc_array_node(BITS_TO_LONGS(nbits), sizeof(unsigned long),
                                  flags, node);
}
EXPORT_SYMBOL(bitmap_alloc_node);

unsigned long *bitmap_zalloc_node(unsigned int nbits, gfp_t flags, int node)
{
        return bitmap_alloc_node(nbits, flags | __GFP_ZERO, node);
}
EXPORT_SYMBOL(bitmap_zalloc_node);

void bitmap_free(const unsigned long *bitmap)
{
        kfree(bitmap);
}
EXPORT_SYMBOL(bitmap_free);

static void devm_bitmap_free(void *data)
{
        unsigned long *bitmap = data;

        bitmap_free(bitmap);
}

unsigned long *devm_bitmap_alloc(struct device *dev,
                                 unsigned int nbits, gfp_t flags)
{
        unsigned long *bitmap;
        int ret;

        bitmap = bitmap_alloc(nbits, flags);
        if (!bitmap)
                return NULL;

        ret = devm_add_action_or_reset(dev, devm_bitmap_free, bitmap);
        if (ret)
                return NULL;

        return bitmap;
}
EXPORT_SYMBOL_GPL(devm_bitmap_alloc);

unsigned long *devm_bitmap_zalloc(struct device *dev,
                                  unsigned int nbits, gfp_t flags)
{
        return devm_bitmap_alloc(dev, nbits, flags | __GFP_ZERO);
}
EXPORT_SYMBOL_GPL(devm_bitmap_zalloc);

#if BITS_PER_LONG == 64
/**
 * bitmap_from_arr32 - copy the contents of u32 array of bits to bitmap
 *      @bitmap: array of unsigned longs, the destination bitmap
 *      @buf: array of u32 (in host byte order), the source bitmap
 *      @nbits: number of bits in @bitmap
 */
void bitmap_from_arr32(unsigned long *bitmap, const u32 *buf, unsigned int nbits)
{
        unsigned int i, halfwords;

        halfwords = DIV_ROUND_UP(nbits, 32);
        for (i = 0; i < halfwords; i++) {
                bitmap[i/2] = (unsigned long) buf[i];
                if (++i < halfwords)
                        bitmap[i/2] |= ((unsigned long) buf[i]) << 32;
        }

        /* Clear tail bits in last word beyond nbits. */
        if (nbits % BITS_PER_LONG)
                bitmap[(halfwords - 1) / 2] &= BITMAP_LAST_WORD_MASK(nbits);
}
EXPORT_SYMBOL(bitmap_from_arr32);

/**
 * bitmap_to_arr32 - copy the contents of bitmap to a u32 array of bits
 *      @buf: array of u32 (in host byte order), the dest bitmap
 *      @bitmap: array of unsigned longs, the source bitmap
 *      @nbits: number of bits in @bitmap
 */
void bitmap_to_arr32(u32 *buf, const unsigned long *bitmap, unsigned int nbits)
{
        unsigned int i, halfwords;

        halfwords = DIV_ROUND_UP(nbits, 32);
        for (i = 0; i < halfwords; i++) {
                buf[i] = (u32) (bitmap[i/2] & UINT_MAX);
                if (++i < halfwords)
                        buf[i] = (u32) (bitmap[i/2] >> 32);
        }

        /* Clear tail bits in last element of array beyond nbits. */
        if (nbits % BITS_PER_LONG)
                buf[halfwords - 1] &= (u32) (UINT_MAX >> ((-nbits) & 31));
}
EXPORT_SYMBOL(bitmap_to_arr32);
#endif

#if (BITS_PER_LONG == 32) && defined(__BIG_ENDIAN)
/**
 * bitmap_from_arr64 - copy the contents of u64 array of bits to bitmap
 *      @bitmap: array of unsigned longs, the destination bitmap
 *      @buf: array of u64 (in host byte order), the source bitmap
 *      @nbits: number of bits in @bitmap
 */
void bitmap_from_arr64(unsigned long *bitmap, const u64 *buf, unsigned int nbits)
{
        int n;

        for (n = nbits; n > 0; n -= 64) {
                u64 val = *buf++;

                *bitmap++ = val;
                if (n > 32)
                        *bitmap++ = val >> 32;
        }

        /*
         * Clear tail bits in the last word beyond nbits.
         *
         * Negative index is OK because here we point to the word next
         * to the last word of the bitmap, except for nbits == 0, which
         * is tested implicitly.
         */
        if (nbits % BITS_PER_LONG)
                bitmap[-1] &= BITMAP_LAST_WORD_MASK(nbits);
}
EXPORT_SYMBOL(bitmap_from_arr64);

/**
 * bitmap_to_arr64 - copy the contents of bitmap to a u64 array of bits
 *      @buf: array of u64 (in host byte order), the dest bitmap
 *      @bitmap: array of unsigned longs, the source bitmap
 *      @nbits: number of bits in @bitmap
 */
void bitmap_to_arr64(u64 *buf, const unsigned long *bitmap, unsigned int nbits)
{
        const unsigned long *end = bitmap + BITS_TO_LONGS(nbits);

        while (bitmap < end) {
                *buf = *bitmap++;
                if (bitmap < end)
                        *buf |= (u64)(*bitmap++) << 32;
                buf++;
        }

        /* Clear tail bits in the last element of array beyond nbits. */
        if (nbits % 64)
                buf[-1] &= GENMASK_ULL((nbits - 1) % 64, 0);
}
EXPORT_SYMBOL(bitmap_to_arr64);
#endif