o->min_bs[DDIR_READ] == o->min_bs[DDIR_TRIM];
}
-
-static unsigned long long get_rand_start_delay(struct thread_data *td)
-{
- unsigned long long delayrange;
- uint64_t frand_max;
- unsigned long r;
-
- delayrange = td->o.start_delay_high - td->o.start_delay;
-
- frand_max = rand_max(&td->delay_state);
- r = __rand(&td->delay_state);
- delayrange = (unsigned long long) ((double) delayrange * (r / (frand_max + 1.0)));
-
- delayrange += td->o.start_delay;
- return delayrange;
-}
-
/*
* <3 Johannes
*/
" mutexes, forcing use of threads. Use the 'thread'"
" option to get rid of this warning.\n");
o->use_thread = 1;
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
#endif
log_err("fio: read iolog overrides write_iolog\n");
free(o->write_iolog_file);
o->write_iolog_file = NULL;
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
/*
!o->norandommap) {
log_err("fio: Any use of blockalign= turns off randommap\n");
o->norandommap = 1;
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
if (!o->file_size_high)
o->file_size_high = o->file_size_low;
- if (o->start_delay_high)
- o->start_delay = get_rand_start_delay(td);
+ if (o->start_delay_high) {
+ if (!o->start_delay_orig)
+ o->start_delay_orig = o->start_delay;
+ o->start_delay = rand_between(&td->delay_state,
+ o->start_delay_orig,
+ o->start_delay_high);
+ }
if (o->norandommap && o->verify != VERIFY_NONE
&& !fixed_block_size(o)) {
log_err("fio: norandommap given for variable block sizes, "
"verify limited\n");
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
if (o->bs_unaligned && (o->odirect || td_ioengine_flagged(td, FIO_RAWIO)))
log_err("fio: bs_unaligned may not work with raw io\n");
log_err("fio: checking for in-flight overlaps when the "
"io_submit_mode is offload is not supported\n");
o->serialize_overlap = 0;
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
if (o->nr_files > td->files_index)
((o->ratemin[DDIR_READ] + o->ratemin[DDIR_WRITE] + o->ratemin[DDIR_TRIM]) &&
(o->rate_iops_min[DDIR_READ] + o->rate_iops_min[DDIR_WRITE] + o->rate_iops_min[DDIR_TRIM]))) {
log_err("fio: rate and rate_iops are mutually exclusive\n");
- ret = 1;
+ ret |= 1;
}
if ((o->rate[DDIR_READ] && (o->rate[DDIR_READ] < o->ratemin[DDIR_READ])) ||
(o->rate[DDIR_WRITE] && (o->rate[DDIR_WRITE] < o->ratemin[DDIR_WRITE])) ||
(o->rate_iops[DDIR_WRITE] && (o->rate_iops[DDIR_WRITE] < o->rate_iops_min[DDIR_WRITE])) ||
(o->rate_iops[DDIR_TRIM] && (o->rate_iops[DDIR_TRIM] < o->rate_iops_min[DDIR_TRIM]))) {
log_err("fio: minimum rate exceeds rate\n");
- ret = 1;
+ ret |= 1;
}
if (!o->timeout && o->time_based) {
log_err("fio: time_based requires a runtime/timeout setting\n");
o->time_based = 0;
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
if (o->fill_device && !o->size)
log_info("fio: multiple writers may overwrite blocks "
"that belong to other jobs. This can cause "
"verification failures.\n");
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
/*
log_info("fio: verification read phase will never "
"start because write phase uses all of "
"runtime\n");
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
if (!fio_option_is_set(o, refill_buffers))
if (td_ioengine_flagged(td, FIO_PIPEIO)) {
log_info("fio: cannot pre-read files with an IO engine"
" that isn't seekable. Pre-read disabled.\n");
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
}
- if (!o->unit_base) {
+ if (o->unit_base == N2S_NONE) {
if (td_ioengine_flagged(td, FIO_BIT_BASED))
- o->unit_base = 1;
+ o->unit_base = N2S_BITPERSEC;
else
- o->unit_base = 8;
+ o->unit_base = N2S_BYTEPERSEC;
}
#ifndef FIO_HAVE_ANY_FALLOCATE
" this warning\n");
o->fsync_blocks = o->fdatasync_blocks;
o->fdatasync_blocks = 0;
- ret = warnings_fatal;
+ ret |= warnings_fatal;
}
#endif
log_err("fio: Windows does not support direct or non-buffered io with"
" the synchronous ioengines. Use the 'windowsaio' ioengine"
" with 'direct=1' and 'iodepth=1' instead.\n");
- ret = 1;
+ ret |= 1;
}
#endif
if (o->size && o->size < td_min_bs(td)) {
log_err("fio: size too small, must not be less than minimum block size: %llu < %u\n",
(unsigned long long) o->size, td_min_bs(td));
- ret = 1;
+ ret |= 1;
}
/*
if (td_ioengine_flagged(td, FIO_NOEXTEND) && o->file_append) {
log_err("fio: can't append/extent with IO engine %s\n", td->io_ops->name);
- ret = 1;
+ ret |= 1;
}
if (fio_option_is_set(o, gtod_cpu)) {
log_err("fio: block error histogram only available "
"with a single file per job, but %d files "
"provided\n", o->nr_files);
- ret = 1;
+ ret |= 1;
}
if (fio_option_is_set(o, clat_percentiles) &&
o->lat_percentiles && o->clat_percentiles) {
log_err("fio: lat_percentiles and clat_percentiles are "
"mutually exclusive\n");
- ret = 1;
+ ret |= 1;
}
if (o->disable_lat)
static void td_fill_rand_seeds_internal(struct thread_data *td, bool use64)
{
+ unsigned int read_seed = td->rand_seeds[FIO_RAND_BS_OFF];
+ unsigned int write_seed = td->rand_seeds[FIO_RAND_BS1_OFF];
+ unsigned int trim_seed = td->rand_seeds[FIO_RAND_BS2_OFF];
int i;
/*
* trimwrite is special in that we need to generate the same
* offsets to get the "write after trim" effect. If we are
* using bssplit to set buffer length distributions, ensure that
- * we seed the trim and write generators identically.
+ * we seed the trim and write generators identically. Ditto for
+ * verify, read and writes must have the same seed, if we are doing
+ * read verify.
*/
- if (td_trimwrite(td)) {
- init_rand_seed(&td->bsrange_state[DDIR_READ], td->rand_seeds[FIO_RAND_BS_OFF], use64);
- init_rand_seed(&td->bsrange_state[DDIR_WRITE], td->rand_seeds[FIO_RAND_BS1_OFF], use64);
- init_rand_seed(&td->bsrange_state[DDIR_TRIM], td->rand_seeds[FIO_RAND_BS1_OFF], use64);
- } else {
- init_rand_seed(&td->bsrange_state[DDIR_READ], td->rand_seeds[FIO_RAND_BS_OFF], use64);
- init_rand_seed(&td->bsrange_state[DDIR_WRITE], td->rand_seeds[FIO_RAND_BS1_OFF], use64);
- init_rand_seed(&td->bsrange_state[DDIR_TRIM], td->rand_seeds[FIO_RAND_BS2_OFF], use64);
- }
+ if (td->o.verify != VERIFY_NONE)
+ write_seed = read_seed;
+ if (td_trimwrite(td))
+ trim_seed = write_seed;
+ init_rand_seed(&td->bsrange_state[DDIR_READ], read_seed, use64);
+ init_rand_seed(&td->bsrange_state[DDIR_WRITE], write_seed, use64);
+ init_rand_seed(&td->bsrange_state[DDIR_TRIM], trim_seed, use64);
td_fill_verify_state_seed(td);
init_rand_seed(&td->rwmix_state, td->rand_seeds[FIO_RAND_MIX_OFF], false);
}
}
+ if (setup_random_seeds(td)) {
+ td_verror(td, errno, "setup_random_seeds");
+ goto err;
+ }
+
if (fixup_options(td))
goto err;
td->groupid = groupid;
prev_group_jobs++;
- if (setup_random_seeds(td)) {
- td_verror(td, errno, "setup_random_seeds");
- goto err;
- }
-
if (setup_rate(td))
goto err;
projects / fio.git / blobdiff