limit reads or writes to a certain rate. If that is the case, then the
distribution may be skewed. Default: 50.
.TP
-.BI random_distribution \fR=\fPstr:float[,str:float][,str:float]
+.BI random_distribution \fR=\fPstr:float[:float][,str:float][,str:float]
By default, fio will use a completely uniform random distribution when asked
to perform random I/O. Sometimes it is useful to skew the distribution in
specific ways, ensuring that some parts of the data is more hot than others.
map. For the \fBnormal\fR distribution, a normal (Gaussian) deviation is
supplied as a value between 0 and 100.
.P
+The second, optional float is allowed for \fBpareto\fR, \fBzipf\fR and \fBnormal\fR
+distributions. It allows to set base of distribution in non-default place, giving
+more control over most probable outcome. This value is in range [0-1] which maps linearly to
+range of possible random values.
+Defaults are: random for \fBpareto\fR and \fBzipf\fR, and 0.5 for \fBnormal\fR.
+If you wanted to use \fBzipf\fR with a `theta` of 1.2 centered on 1/4 of allowed value range,
+you would use `random_distibution=zipf:1.2:0.25`.
+.P
For a \fBzoned\fR distribution, fio supports specifying percentages of I/O
access that should fall within what range of the file or device. For
example, given a criteria of:
This will be ignored if \fBpre_read\fR is also specified for the
same job.
.TP
-.BI sync \fR=\fPbool
-Use synchronous I/O for buffered writes. For the majority of I/O engines,
-this means using O_SYNC. Default: false.
+.BI sync \fR=\fPstr
+Whether, and what type, of synchronous I/O to use for writes. The allowed
+values are:
+.RS
+.RS
+.TP
+.B none
+Do not use synchronous IO, the default.
+.TP
+.B 0
+Same as \fBnone\fR.
+.TP
+.B sync
+Use synchronous file IO. For the majority of I/O engines,
+this means using O_SYNC.
+.TP
+.B 1
+Same as \fBsync\fR.
+.TP
+.B dsync
+Use synchronous data IO. For the majority of I/O engines,
+this means using O_DSYNC.
+.PD
+.RE
+.RE
.TP
.BI iomem \fR=\fPstr "\fR,\fP mem" \fR=\fPstr
Fio can use various types of memory as the I/O unit buffer. The allowed
will perform I/O within the first 20GiB but exit when 5GiB have been
done. The opposite is also possible \-\- if \fBsize\fR is set to 20GiB,
and \fBio_size\fR is set to 40GiB, then fio will do 40GiB of I/O within
-the 0..20GiB region.
+the 0..20GiB region. Value can be set as percentage: \fBio_size\fR=N%.
+In this case \fBio_size\fR multiplies \fBsize\fR= value.
.TP
.BI filesize \fR=\fPirange(int)
Individual file sizes. May be a range, in which case fio will select sizes
.TP
.B cpuio
Doesn't transfer any data, but burns CPU cycles according to the
-\fBcpuload\fR and \fBcpuchunks\fR options. Setting
-\fBcpuload\fR\=85 will cause that job to do nothing but burn 85%
-of the CPU. In case of SMP machines, use `numjobs=<nr_of_cpu>'
-to get desired CPU usage, as the cpuload only loads a
-single CPU at the desired rate. A job never finishes unless there is
-at least one non-cpuio job.
-.TP
-.B guasi
-The GUASI I/O engine is the Generic Userspace Asynchronous Syscall
-Interface approach to async I/O. See \fIhttp://www.xmailserver.org/guasi-lib.html\fR
-for more info on GUASI.
+\fBcpuload\fR, \fBcpuchunks\fR and \fBcpumode\fR options.
+A job never finishes unless there is at least one non-cpuio job.
+.RS
+.P
+.PD 0
+\fBcpuload\fR\=85 will cause that job to do nothing but burn 85% of the CPU.
+In case of SMP machines, use \fBnumjobs=<nr_of_cpu>\fR\ to get desired CPU usage,
+as the cpuload only loads a single CPU at the desired rate.
+
+.P
+\fBcpumode\fR\=qsort replace the default noop instructions loop
+by a qsort algorithm to consume more energy.
+
+.P
+.RE
.TP
.B rdma
The RDMA I/O engine supports both RDMA memory semantics
.TP
.B nbd
Synchronous read and write a Network Block Device (NBD).
+.TP
+.B libcufile
+I/O engine supporting libcufile synchronous access to nvidia-fs and a
+GPUDirect Storage-supported filesystem. This engine performs
+I/O without transferring buffers between user-space and the kernel,
+unless \fBverify\fR is set or \fBcuda_io\fR is \fBposix\fR. \fBiomem\fR must
+not be \fBcudamalloc\fR. This ioengine defines engine specific options.
.SS "I/O engine specific parameters"
In addition, there are some parameters which are only valid when a specific
\fBioengine\fR is in use. These are used identically to normal parameters,
Specify stat system call type to measure lookup/getattr performance.
Default is \fBstat\fR for \fBstat\fR\|(2).
.TP
+.BI (sg)hipri
+If this option is set, fio will attempt to use polled IO completions. This
+will have a similar effect as (io_uring)hipri. Only SCSI READ and WRITE
+commands will have the SGV4_FLAG_HIPRI set (not UNMAP (trim) nor VERIFY).
+Older versions of the Linux sg driver that do not support hipri will simply
+ignore this flag and do normal IO. The Linux SCSI Low Level Driver (LLD)
+that "owns" the device also needs to support hipri (also known as iopoll
+and mq_poll). The MegaRAID driver is an example of a SCSI LLD.
+Default: clear (0) which does normal (interrupted based) IO.
+.TP
.BI (sg)readfua \fR=\fPbool
With readfua option set to 1, read operations include the force
unit access (fua) flag. Default: 0.
\fInbd+unix:///?socket=/tmp/socket\fR
.TP
\fInbds://tlshost/exportname\fR
-
+.RE
+.RE
+.TP
+.BI (libcufile)gpu_dev_ids\fR=\fPstr
+Specify the GPU IDs to use with CUDA. This is a colon-separated list of int.
+GPUs are assigned to workers roundrobin. Default is 0.
+.TP
+.BI (libcufile)cuda_io\fR=\fPstr
+Specify the type of I/O to use with CUDA. This option
+takes the following values:
+.RS
+.RS
+.TP
+.B cufile (default)
+Use libcufile and nvidia-fs. This option performs I/O directly
+between a GPUDirect Storage filesystem and GPU buffers,
+avoiding use of a bounce buffer. If \fBverify\fR is set,
+cudaMemcpy is used to copy verification data between RAM and GPU(s).
+Verification data is copied from RAM to GPU before a write
+and from GPU to RAM after a read.
+\fBdirect\fR must be 1.
+.TP
+.BI posix
+Use POSIX to perform I/O with a RAM buffer, and use
+cudaMemcpy to transfer data between RAM and the GPU(s).
+Data is copied from GPU to RAM before a write and copied
+from RAM to GPU after a read. \fBverify\fR does not affect
+the use of cudaMemcpy.
+.RE
+.RE
.SS "I/O depth"
.TP
.BI iodepth \fR=\fPint
can increase latencies. The benefit is that fio can manage submission rates
independently of the device completion rates. This avoids skewed latency
reporting if I/O gets backed up on the device side (the coordinated omission
-problem).
+problem). Note that this option cannot reliably be used with async IO engines.
.SS "I/O rate"
.TP
.BI thinktime \fR=\fPtime
before we have to complete it and do our \fBthinktime\fR. In other words, this
setting effectively caps the queue depth if the latter is larger.
.TP
+.BI thinktime_blocks_type \fR=\fPstr
+Only valid if \fBthinktime\fR is set - control how \fBthinktime_blocks\fR triggers.
+The default is `complete', which triggers \fBthinktime\fR when fio completes
+\fBthinktime_blocks\fR blocks. If this is set to `issue', then the trigger happens
+at the issue side.
+.TP
.BI rate \fR=\fPint[,int][,int]
Cap the bandwidth used by this job. The number is in bytes/sec, the normal
suffix rules apply. Comma-separated values may be specified for reads,
minimal output v3, separated by semicolons:
.P
.nf
- terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_min;read_clat_max;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_min;write_clat_max;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
+ terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth_kb;read_iops;read_runtime_ms;read_slat_min_us;read_slat_max_us;read_slat_mean_us;read_slat_dev_us;read_clat_min_us;read_clat_max_us;read_clat_mean_us;read_clat_dev_us;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min_us;read_lat_max_us;read_lat_mean_us;read_lat_dev_us;read_bw_min_kb;read_bw_max_kb;read_bw_agg_pct;read_bw_mean_kb;read_bw_dev_kb;write_kb;write_bandwidth_kb;write_iops;write_runtime_ms;write_slat_min_us;write_slat_max_us;write_slat_mean_us;write_slat_dev_us;write_clat_min_us;write_clat_max_us;write_clat_mean_us;write_clat_dev_us;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min_us;write_lat_max_us;write_lat_mean_us;write_lat_dev_us;write_bw_min_kb;write_bw_max_kb;write_bw_agg_pct;write_bw_mean_kb;write_bw_dev_kb;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
.fi
.P
In client/server mode terse output differs from what appears when jobs are run
projects / fio.git / blobdiff