randread Random reads
rw,readwrite Sequential mixed reads and writes
randrw Random mixed reads and writes
+ trimwrite Mixed trims and writes. Blocks will be
+ trimmed first, then written to.
For the mixed io types, the default is to split them 50/50.
For certain types of io the result may still be skewed a bit,
randrepeat=bool For random IO workloads, seed the generator in a predictable
way so that results are repeatable across repetitions.
+ Defaults to true.
randseed=int Seed the random number generators based on this seed value, to
be able to control what sequence of output is being generated.
If set, fio will use POSIX_FADV_SEQUENTIAL for sequential
IO and POSIX_FADV_RANDOM for random IO.
+fadvise_stream=int Notify the kernel what write stream ID to place these
+ writes under. Only supported on Linux. Note, this option
+ may change going forward.
+
size=int The total size of file io for this job. Fio will run until
this many bytes has been transferred, unless runtime is
limited by other options (such as 'runtime', for instance,
zero_buffers If this option is given, fio will init the IO buffers to
all zeroes. The default is to fill them with random data.
- The resulting IO buffers will not be completely zeroed,
- unless scramble_buffers is also turned off.
refill_buffers If this option is given, fio will refill the IO buffers
on every submit. The default is to only fill it at init
necessary environment variables to work with
hdfs/libhdfs properly.
+ mtd Read, write and erase an MTD character device
+ (e.g., /dev/mtd0). Discards are treated as
+ erases. Depending on the underlying device
+ type, the I/O may have to go in a certain
+ pattern, e.g., on NAND, writing sequentially
+ to erase blocks and discarding before
+ overwriting. The writetrim mode works well
+ for this constraint.
+
external Prefix to specify loading an external
IO engine object file. Append the engine
filename, eg ioengine=external:/tmp/foo.o
after fio has filled the queue of 16 requests, it will let
the depth drain down to 4 before starting to fill it again.
+io_submit_mode=str This option controls how fio submits the IO to
+ the IO engine. The default is 'inline', which means that the
+ fio job threads submit and reap IO directly. If set to
+ 'offload', the job threads will offload IO submission to a
+ dedicated pool of IO threads. This requires some coordination
+ and thus has a bit of extra overhead, especially for lower
+ queue depth IO where it can increase latencies. The benefit
+ is that fio can manage submission rates independently of
+ the device completion rates. This avoids skewed latency
+ reporting if IO gets back up on the device side (the
+ coordinated omission problem).
+
direct=bool If value is true, use non-buffered io. This is usually
O_DIRECT. Note that ZFS on Solaris doesn't support direct io.
On Windows the synchronous ioengines don't support direct io.
that will be done. The actual job contents are not
executed.
+allow_file_create=bool If true, fio is permitted to create files as part
+ of its workload. This is the default behavior. If this
+ option is false, then fio will error out if the files it
+ needs to use don't already exist. Default: true.
+
+allow_mounted_write=bool If this isn't set, fio will abort jobs that
+ are destructive (eg that write) to what appears to be a
+ mounted device or partition. This should help catch creating
+ inadvertently destructive tests, not realizing that the test
+ will destroy data on the mounted file system. Default: false.
+
pre_read=bool If this is given, files will be pre-read into memory before
starting the given IO operation. This will also clear
the 'invalidate' flag, since it is pointless to pre-read
independent fio invocations. Unfortuantely this also breaks
the strict time ordering between multiple device accesses.
+replay_align=int Force alignment of IO offsets and lengths in a trace
+ to this power of 2 value.
+
+replay_scale=int Scale sector offsets down by this factor when
+ replaying traces.
+
+per_job_logs=bool If set, this generates bw/clat/iops log with per
+ file private filenames. If not set, jobs with identical names
+ will share the log filename. Default: true.
+
write_bw_log=str If given, write a bandwidth log of the jobs in this job
file. Can be used to store data of the bandwidth of the
jobs in their lifetime. The included fio_generate_plots
graphs. See write_lat_log for behaviour of given
filename. For this option, the suffix is _bw.x.log, where
x is the index of the job (1..N, where N is the number of
- jobs).
+ jobs). If 'per_job_logs' is false, then the filename will not
+ include the job index.
write_lat_log=str Same as write_bw_log, except that this option stores io
submission, completion, and total latencies instead. If no
The actual log names will be foo_slat.x.log, foo_clat.x.log,
and foo_lat.x.log, where x is the index of the job (1..N,
where N is the number of jobs). This helps fio_generate_plot
- fine the logs automatically.
+ fine the logs automatically. If 'per_job_logs' is false, then
+ the filename will not include the job index.
+
write_iops_log=str Same as write_bw_log, but writes IOPS. If no filename is
given with this option, the default filename of
"jobname_type.x.log" is used,where x is the index of the job
(1..N, where N is the number of jobs). Even if the filename
- is given, fio will still append the type of log.
+ is given, fio will still append the type of log. If
+ 'per_job_logs' is false, then the filename will not include
+ the job index.
log_avg_msec=int By default, fio will log an entry in the iops, latency,
or bw log for every IO that completes. When writing to the
command line parameter. The files will be stored with a
.fz suffix.
+block_error_percentiles=bool If set, record errors in trim block-sized
+ units from writes and trims and output a histogram of
+ how many trims it took to get to errors, and what kind
+ of error was encountered.
+
lockmem=int Pin down the specified amount of memory with mlock(2). Can
potentially be used instead of removing memory or booting
with less memory to simulate a smaller amount of memory.
completion latencies.
percentile_list=float_list Overwrite the default list of percentiles
- for completion latencies. Each number is a floating
- number in the range (0,100], and the maximum length of
- the list is 20. Use ':' to separate the numbers, and
- list the numbers in ascending order. For example,
- --percentile_list=99.5:99.9 will cause fio to report
- the values of completion latency below which 99.5% and
- 99.9% of the observed latencies fell, respectively.
+ for completion latencies and the block error histogram.
+ Each number is a floating number in the range (0,100],
+ and the maximum length of the list is 20. Use ':'
+ to separate the numbers, and list the numbers in ascending
+ order. For example, --percentile_list=99.5:99.9 will cause
+ fio to report the values of completion latency below which
+ 99.5% and 99.9% of the observed latencies fell, respectively.
clocksource=str Use the given clocksource as the base of timing. The
supported options are:
1 : allocate space immidietly inside defragment event,
and free right after event
+[mtd] skip_bad=bool Skip operations against known bad blocks.
6.0 Interpreting the output
bytes. The action can be one of these:
wait Wait for 'offset' microseconds. Everything below 100 is discarded.
+ The time is relative to the previous wait statement.
read Read 'length' bytes beginning from 'offset'
write Write 'length' bytes beginning from 'offset'
sync fsync() the file
projects / fio.git / blobdiff