The GPL isn't a EULA: remove it and introduce WixUI_Minimal_NoEULA

[fio.git] / HOWTO

diff --git a/HOWTO b/HOWTO
index 041b91fa828a239612ca840c560932cfbc58625c..889526d921393c5a9cc94e099f41283316e4f9ec 100644 (file)
--- a/HOWTO
+++ b/HOWTO
@@ -1146,11 +1146,31 @@ I/O type
        behaves in a similar fashion, except it sends the same offset 8 number of
        times before generating a new offset.
 
-.. option:: unified_rw_reporting=bool
+.. option:: unified_rw_reporting=str
 
        Fio normally reports statistics on a per data direction basis, meaning that
-       reads, writes, and trims are accounted and reported separately. If this
-       option is set fio sums the results and report them as "mixed" instead.
+       reads, writes, and trims are accounted and reported separately. This option
+       determines whether fio reports the results normally, summed together, or as
+       both options.
+       Accepted values are:
+
+               **none**
+                       Normal statistics reporting.
+
+               **mixed**
+                       Statistics are summed per data direction and reported together.
+
+               **both**
+                       Statistics are reported normally, followed by the mixed statistics.
+
+               **0**
+                       Backward-compatible alias for **none**.
+
+               **1**
+                       Backward-compatible alias for **mixed**.
+               
+               **2**
+                       Alias for **both**.
 
 .. option:: randrepeat=bool
 
@@ -2035,6 +2055,11 @@ I/O engine
                        and 'nrfiles', so that files will be created.
                        This engine is to measure file lookup and meta data access.
 
+               **filedelete**
+                       Simply delete the files by unlink() and do no I/O to them. You need to set 'filesize'
+                       and 'nrfiles', so that the files will be created.
+                       This engine is to measure file delete.
+
                **libpmem**
                        Read and write using mmap I/O to a file on a filesystem
                        mounted with DAX on a persistent memory device through the PMDK
@@ -2192,7 +2217,7 @@ with the caveat that when used on the command line, they must come after the
                this will be the starting port number since fio will use a range of
                ports.
 
-   [rdma]
+   [rdma], [librpma_*]
 
                The port to use for RDMA-CM communication. This should be the same value
                on the client and the server side.
@@ -2203,6 +2228,20 @@ with the caveat that when used on the command line, they must come after the
        is a TCP listener or UDP reader, the hostname is not used and must be omitted
        unless it is a valid UDP multicast address.
 
+.. option:: serverip=str : [librpma_*]
+
+       The IP address to be used for RDMA-CM based I/O.
+
+.. option:: direct_write_to_pmem=bool : [librpma_*]
+
+       Set to 1 only when Direct Write to PMem from the remote host is possible.
+       Otherwise, set to 0.
+
+.. option:: busy_wait_polling=bool : [librpma_*_server]
+
+       Set to 0 to wait for completion instead of busy-wait polling completion.
+       Default: 1.
+
 .. option:: interface=str : [netsplice] [net]
 
        The IP address of the network interface used to send or receive UDP
@@ -2299,6 +2338,12 @@ with the caveat that when used on the command line, they must come after the
         Poll store instead of waiting for completion. Usually this provides better
         throughput at cost of higher(up to 100%) CPU utilization.
 
+.. option:: touch_objects=bool : [rados]
+
+        During initialization, touch (create if do not exist) all objects (files).
+        Touching all objects affects ceph caches and likely impacts test results.
+        Enabled by default.
+
 .. option:: skip_bad=bool : [mtd]
 
        Skip operations against known bad blocks.