[fio.git] / stat.h

#ifndef FIO_STAT_H
#define FIO_STAT_H

#include "iolog.h"
#include "lib/output_buffer.h"

struct group_run_stats {
	uint64_t max_run[DDIR_RWDIR_CNT], min_run[DDIR_RWDIR_CNT];
	uint64_t max_bw[DDIR_RWDIR_CNT], min_bw[DDIR_RWDIR_CNT];
	uint64_t io_kb[DDIR_RWDIR_CNT];
	uint64_t agg[DDIR_RWDIR_CNT];
	uint32_t kb_base;
	uint32_t unit_base;
	uint32_t groupid;
	uint32_t unified_rw_rep;
} __attribute__((packed));

/*
 * How many depth levels to log
 */
#define FIO_IO_U_MAP_NR	7
#define FIO_IO_U_LAT_U_NR 10
#define FIO_IO_U_LAT_M_NR 12

/*
 * Aggregate clat samples to report percentile(s) of them.
 *
 * EXECUTIVE SUMMARY
 *
 * FIO_IO_U_PLAT_BITS determines the maximum statistical error on the
 * value of resulting percentiles. The error will be approximately
 * 1/2^(FIO_IO_U_PLAT_BITS+1) of the value.
 *
 * FIO_IO_U_PLAT_GROUP_NR and FIO_IO_U_PLAT_BITS determine the maximum
 * range being tracked for latency samples. The maximum value tracked
 * accurately will be 2^(GROUP_NR + PLAT_BITS -1) microseconds.
 *
 * FIO_IO_U_PLAT_GROUP_NR and FIO_IO_U_PLAT_BITS determine the memory
 * requirement of storing those aggregate counts. The memory used will
 * be (FIO_IO_U_PLAT_GROUP_NR * 2^FIO_IO_U_PLAT_BITS) * sizeof(int)
 * bytes.
 *
 * FIO_IO_U_PLAT_NR is the total number of buckets.
 *
 * DETAILS
 *
 * Suppose the clat varies from 0 to 999 (usec), the straightforward
 * method is to keep an array of (999 + 1) buckets, in which a counter
 * keeps the count of samples which fall in the bucket, e.g.,
 * {[0],[1],...,[999]}. However this consumes a huge amount of space,
 * and can be avoided if an approximation is acceptable.
 *
 * One such method is to let the range of the bucket to be greater
 * than one. This method has low accuracy when the value is small. For
 * example, let the buckets be {[0,99],[100,199],...,[900,999]}, and
 * the represented value of each bucket be the mean of the range. Then
 * a value 0 has an round-off error of 49.5. To improve on this, we
 * use buckets with non-uniform ranges, while bounding the error of
 * each bucket within a ratio of the sample value. A simple example
 * would be when error_bound = 0.005, buckets are {
 * {[0],[1],...,[99]}, {[100,101],[102,103],...,[198,199]},..,
 * {[900,909],[910,919]...}  }. The total range is partitioned into
 * groups with different ranges, then buckets with uniform ranges. An
 * upper bound of the error is (range_of_bucket/2)/value_of_bucket
 *
 * For better efficiency, we implement this using base two. We group
 * samples by their Most Significant Bit (MSB), extract the next M bit
 * of them as an index within the group, and discard the rest of the
 * bits.
 *
 * E.g., assume a sample 'x' whose MSB is bit n (starting from bit 0),
 * and use M bit for indexing
 *
 *        | n |    M bits   | bit (n-M-1) ... bit 0 |
 *
 * Because x is at least 2^n, and bit 0 to bit (n-M-1) is at most
 * (2^(n-M) - 1), discarding bit 0 to (n-M-1) makes the round-off
 * error
 *
 *           2^(n-M)-1    2^(n-M)    1
 *      e <= --------- <= ------- = ---
 *             2^n          2^n     2^M
 *
 * Furthermore, we use "mean" of the range to represent the bucket,
 * the error e can be lowered by half to 1 / 2^(M+1). By using M bits
 * as the index, each group must contains 2^M buckets.
 *
 * E.g. Let M (FIO_IO_U_PLAT_BITS) be 6
 *      Error bound is 1/2^(6+1) = 0.0078125 (< 1%)
 *
 *	Group	MSB	#discarded	range of		#buckets
 *			error_bits	value
 *	----------------------------------------------------------------
 *	0*	0~5	0		[0,63]			64
 *	1*	6	0		[64,127]		64
 *	2	7	1		[128,255]		64
 *	3	8	2		[256,511]		64
 *	4	9	3		[512,1023]		64
 *	...	...	...		[...,...]		...
 *	18	23	17		[8838608,+inf]**	64
 *
 *  * Special cases: when n < (M-1) or when n == (M-1), in both cases,
 *    the value cannot be rounded off. Use all bits of the sample as
 *    index.
 *
 *  ** If a sample's MSB is greater than 23, it will be counted as 23.
 */

#define FIO_IO_U_PLAT_BITS 6
#define FIO_IO_U_PLAT_VAL (1 << FIO_IO_U_PLAT_BITS)
#define FIO_IO_U_PLAT_GROUP_NR 19
#define FIO_IO_U_PLAT_NR (FIO_IO_U_PLAT_GROUP_NR * FIO_IO_U_PLAT_VAL)
#define FIO_IO_U_LIST_MAX_LEN 20 /* The size of the default and user-specified
					list of percentiles */

/*
 * Trim cycle count measurements
 */
#define MAX_NR_BLOCK_INFOS	8192
#define BLOCK_INFO_STATE_SHIFT	29
#define BLOCK_INFO_TRIMS(block_info)	\
	((block_info) & ((1 << BLOCK_INFO_STATE_SHIFT) - 1))
#define BLOCK_INFO_STATE(block_info)		\
	((block_info) >> BLOCK_INFO_STATE_SHIFT)
#define BLOCK_INFO(state, trim_cycles)	\
	((trim_cycles) | ((state) << BLOCK_INFO_STATE_SHIFT))
#define BLOCK_INFO_SET_STATE(block_info, state)	\
	BLOCK_INFO(state, BLOCK_INFO_TRIMS(block_info))
enum block_info_state {
	BLOCK_STATE_UNINIT,
	BLOCK_STATE_TRIMMED,
	BLOCK_STATE_WRITTEN,
	BLOCK_STATE_TRIM_FAILURE,
	BLOCK_STATE_WRITE_FAILURE,
	BLOCK_STATE_COUNT,
};

#define MAX_PATTERN_SIZE	512
#define FIO_JOBNAME_SIZE	128
#define FIO_JOBDESC_SIZE	256
#define FIO_VERROR_SIZE		128

struct thread_stat {
	char name[FIO_JOBNAME_SIZE];
	char verror[FIO_VERROR_SIZE];
	uint32_t error;
	uint32_t thread_number;
	uint32_t groupid;
	uint32_t pid;
	char description[FIO_JOBDESC_SIZE];
	uint32_t members;
	uint32_t unified_rw_rep;

	/*
	 * bandwidth and latency stats
	 */
	struct io_stat clat_stat[DDIR_RWDIR_CNT]; /* completion latency */
	struct io_stat slat_stat[DDIR_RWDIR_CNT]; /* submission latency */
	struct io_stat lat_stat[DDIR_RWDIR_CNT]; /* total latency */
	struct io_stat bw_stat[DDIR_RWDIR_CNT]; /* bandwidth stats */
	struct io_stat iops_stat[DDIR_RWDIR_CNT]; /* IOPS stats */

	/*
	 * fio system usage accounting
	 */
	uint64_t usr_time;
	uint64_t sys_time;
	uint64_t ctx;
	uint64_t minf, majf;

	/*
	 * IO depth and latency stats
	 */
	uint64_t clat_percentiles;
	uint64_t percentile_precision;
	fio_fp64_t percentile_list[FIO_IO_U_LIST_MAX_LEN];

	uint32_t io_u_map[FIO_IO_U_MAP_NR];
	uint32_t io_u_submit[FIO_IO_U_MAP_NR];
	uint32_t io_u_complete[FIO_IO_U_MAP_NR];
	uint32_t io_u_lat_u[FIO_IO_U_LAT_U_NR];
	uint32_t io_u_lat_m[FIO_IO_U_LAT_M_NR];
	uint32_t io_u_plat[DDIR_RWDIR_CNT][FIO_IO_U_PLAT_NR];
	uint32_t pad;

	uint64_t total_io_u[DDIR_RWDIR_CNT];
	uint64_t short_io_u[DDIR_RWDIR_CNT];
	uint64_t drop_io_u[DDIR_RWDIR_CNT];
	uint64_t total_submit;
	uint64_t total_complete;

	uint64_t io_bytes[DDIR_RWDIR_CNT];
	uint64_t runtime[DDIR_RWDIR_CNT];
	uint64_t total_run_time;

	/*
	 * IO Error related stats
	 */
	union {
		uint16_t continue_on_error;
		uint64_t pad2;
	};
	uint64_t total_err_count;
	uint32_t first_error;

	uint64_t nr_block_infos;
	uint32_t block_infos[MAX_NR_BLOCK_INFOS];

	uint32_t kb_base;
	uint32_t unit_base;

	uint32_t latency_depth;
	uint64_t latency_target;
	fio_fp64_t latency_percentile;
	uint64_t latency_window;

	struct steadystate_data *ss;
} __attribute__((packed));

struct jobs_eta {
	uint32_t nr_running;
	uint32_t nr_ramp;

	uint32_t nr_pending;
	uint32_t nr_setting_up;

	uint32_t files_open;

	uint32_t m_rate[DDIR_RWDIR_CNT], t_rate[DDIR_RWDIR_CNT];
	uint32_t m_iops[DDIR_RWDIR_CNT], t_iops[DDIR_RWDIR_CNT];
	uint32_t rate[DDIR_RWDIR_CNT];
	uint32_t iops[DDIR_RWDIR_CNT];
	uint64_t elapsed_sec;
	uint64_t eta_sec;
	uint32_t is_pow2;
	uint32_t unit_base;

	/*
	 * Network 'copy' of run_str[]
	 */
	uint32_t nr_threads;
	uint8_t run_str[];
} __attribute__((packed));

extern struct fio_mutex *stat_mutex;

extern struct jobs_eta *get_jobs_eta(bool force, size_t *size);

extern void stat_init(void);
extern void stat_exit(void);

extern struct json_object * show_thread_status(struct thread_stat *ts, struct group_run_stats *rs, struct flist_head *, struct buf_output *);
extern void show_group_stats(struct group_run_stats *rs, struct buf_output *);
extern int calc_thread_status(struct jobs_eta *je, int force);
extern void display_thread_status(struct jobs_eta *je);
extern void show_run_stats(void);
extern void __show_run_stats(void);
extern void __show_running_run_stats(void);
extern void show_running_run_stats(void);
extern void check_for_running_stats(void);
extern void sum_thread_stats(struct thread_stat *dst, struct thread_stat *src, bool first);
extern void sum_group_stats(struct group_run_stats *dst, struct group_run_stats *src);
extern void init_thread_stat(struct thread_stat *ts);
extern void init_group_run_stat(struct group_run_stats *gs);
extern void eta_to_str(char *str, unsigned long eta_sec);
extern int calc_lat(struct io_stat *is, unsigned long *min, unsigned long *max, double *mean, double *dev);
extern unsigned int calc_clat_percentiles(unsigned int *io_u_plat, unsigned long nr, fio_fp64_t *plist, unsigned int **output, unsigned int *maxv, unsigned int *minv);
extern void stat_calc_lat_m(struct thread_stat *ts, double *io_u_lat);
extern void stat_calc_lat_u(struct thread_stat *ts, double *io_u_lat);
extern void stat_calc_dist(unsigned int *map, unsigned long total, double *io_u_dist);
extern void reset_io_stats(struct thread_data *);
extern void update_rusage_stat(struct thread_data *);
extern void clear_rusage_stat(struct thread_data *);

extern void add_lat_sample(struct thread_data *, enum fio_ddir, unsigned long,
				unsigned int, uint64_t);
extern void add_clat_sample(struct thread_data *, enum fio_ddir, unsigned long,
				unsigned int, uint64_t);
extern void add_slat_sample(struct thread_data *, enum fio_ddir, unsigned long,
				unsigned int, uint64_t);
extern void add_agg_sample(unsigned long, enum fio_ddir, unsigned int);
extern void add_iops_sample(struct thread_data *, struct io_u *,
				unsigned int);
extern void add_bw_sample(struct thread_data *, struct io_u *,
				unsigned int, unsigned long);
extern int calc_log_samples(void);

extern struct io_log *agg_io_log[DDIR_RWDIR_CNT];
extern int write_bw_log;

static inline int usec_to_msec(unsigned long *min, unsigned long *max,
			       double *mean, double *dev)
{
	if (*min > 1000 && *max > 1000 && *mean > 1000.0 && *dev > 1000.0) {
		*min /= 1000;
		*max /= 1000;
		*mean /= 1000.0;
		*dev /= 1000.0;
		return 0;
	}

	return 1;
}
/*
 * Worst level condensing would be 1:5, so allow enough room for that
 */
#define __THREAD_RUNSTR_SZ(nr)	((nr) * 5)
#define THREAD_RUNSTR_SZ	__THREAD_RUNSTR_SZ(thread_number)

uint32_t *io_u_block_info(struct thread_data *td, struct io_u *io_u);

#endif
Commit	Line	Data
	1	#ifndef FIO_STAT_H
	2	#define FIO_STAT_H
	3
	4	#include "iolog.h"
	5	#include "lib/output_buffer.h"
	6
	7	struct group_run_stats {
	8	uint64_t max_run[DDIR_RWDIR_CNT], min_run[DDIR_RWDIR_CNT];
	9	uint64_t max_bw[DDIR_RWDIR_CNT], min_bw[DDIR_RWDIR_CNT];
	10	uint64_t io_kb[DDIR_RWDIR_CNT];
	11	uint64_t agg[DDIR_RWDIR_CNT];
	12	uint32_t kb_base;
	13	uint32_t unit_base;
	14	uint32_t groupid;
	15	uint32_t unified_rw_rep;
	16	} __attribute__((packed));
	17
	18	/*
	19	* How many depth levels to log
	20	*/
	21	#define FIO_IO_U_MAP_NR 7
	22	#define FIO_IO_U_LAT_U_NR 10
	23	#define FIO_IO_U_LAT_M_NR 12
	24
	25	/*
	26	* Aggregate clat samples to report percentile(s) of them.
	27	*
	28	* EXECUTIVE SUMMARY
	29	*
	30	* FIO_IO_U_PLAT_BITS determines the maximum statistical error on the
	31	* value of resulting percentiles. The error will be approximately
	32	* 1/2^(FIO_IO_U_PLAT_BITS+1) of the value.
	33	*
	34	* FIO_IO_U_PLAT_GROUP_NR and FIO_IO_U_PLAT_BITS determine the maximum
	35	* range being tracked for latency samples. The maximum value tracked
	36	* accurately will be 2^(GROUP_NR + PLAT_BITS -1) microseconds.
	37	*
	38	* FIO_IO_U_PLAT_GROUP_NR and FIO_IO_U_PLAT_BITS determine the memory
	39	* requirement of storing those aggregate counts. The memory used will
	40	* be (FIO_IO_U_PLAT_GROUP_NR * 2^FIO_IO_U_PLAT_BITS) * sizeof(int)
	41	* bytes.
	42	*
	43	* FIO_IO_U_PLAT_NR is the total number of buckets.
	44	*
	45	* DETAILS
	46	*
	47	* Suppose the clat varies from 0 to 999 (usec), the straightforward
	48	* method is to keep an array of (999 + 1) buckets, in which a counter
	49	* keeps the count of samples which fall in the bucket, e.g.,
	50	* {[0],[1],...,[999]}. However this consumes a huge amount of space,
	51	* and can be avoided if an approximation is acceptable.
	52	*
	53	* One such method is to let the range of the bucket to be greater
	54	* than one. This method has low accuracy when the value is small. For
	55	* example, let the buckets be {[0,99],[100,199],...,[900,999]}, and
	56	* the represented value of each bucket be the mean of the range. Then
	57	* a value 0 has an round-off error of 49.5. To improve on this, we
	58	* use buckets with non-uniform ranges, while bounding the error of
	59	* each bucket within a ratio of the sample value. A simple example
	60	* would be when error_bound = 0.005, buckets are {
	61	* {[0],[1],...,[99]}, {[100,101],[102,103],...,[198,199]},..,
	62	* {[900,909],[910,919]...} }. The total range is partitioned into
	63	* groups with different ranges, then buckets with uniform ranges. An
	64	* upper bound of the error is (range_of_bucket/2)/value_of_bucket
	65	*
	66	* For better efficiency, we implement this using base two. We group
	67	* samples by their Most Significant Bit (MSB), extract the next M bit
	68	* of them as an index within the group, and discard the rest of the
	69	* bits.
	70	*
	71	* E.g., assume a sample 'x' whose MSB is bit n (starting from bit 0),
	72	* and use M bit for indexing
	73	*
	74	* \| n \| M bits \| bit (n-M-1) ... bit 0 \|
	75	*
	76	* Because x is at least 2^n, and bit 0 to bit (n-M-1) is at most
	77	* (2^(n-M) - 1), discarding bit 0 to (n-M-1) makes the round-off
	78	* error
	79	*
	80	* 2^(n-M)-1 2^(n-M) 1
	81	* e <= --------- <= ------- = ---
	82	* 2^n 2^n 2^M
	83	*
	84	* Furthermore, we use "mean" of the range to represent the bucket,
	85	* the error e can be lowered by half to 1 / 2^(M+1). By using M bits
	86	* as the index, each group must contains 2^M buckets.
	87	*
	88	* E.g. Let M (FIO_IO_U_PLAT_BITS) be 6
	89	* Error bound is 1/2^(6+1) = 0.0078125 (< 1%)
	90	*
	91	* Group MSB #discarded range of #buckets
	92	* error_bits value
	93	* ----------------------------------------------------------------
	94	* 0* 0~5 0 [0,63] 64
	95	* 1* 6 0 [64,127] 64
	96	* 2 7 1 [128,255] 64
	97	* 3 8 2 [256,511] 64
	98	* 4 9 3 [512,1023] 64
	99	* ... ... ... [...,...] ...
	100	* 18 23 17 [8838608,+inf]** 64
	101	*
	102	* * Special cases: when n < (M-1) or when n == (M-1), in both cases,
	103	* the value cannot be rounded off. Use all bits of the sample as
	104	* index.
	105	*
	106	* ** If a sample's MSB is greater than 23, it will be counted as 23.
	107	*/
	108
	109	#define FIO_IO_U_PLAT_BITS 6
	110	#define FIO_IO_U_PLAT_VAL (1 << FIO_IO_U_PLAT_BITS)
	111	#define FIO_IO_U_PLAT_GROUP_NR 19
	112	#define FIO_IO_U_PLAT_NR (FIO_IO_U_PLAT_GROUP_NR * FIO_IO_U_PLAT_VAL)
	113	#define FIO_IO_U_LIST_MAX_LEN 20 /* The size of the default and user-specified
	114	list of percentiles */
	115
	116	/*
	117	* Trim cycle count measurements
	118	*/
	119	#define MAX_NR_BLOCK_INFOS 8192
	120	#define BLOCK_INFO_STATE_SHIFT 29
	121	#define BLOCK_INFO_TRIMS(block_info) \
	122	((block_info) & ((1 << BLOCK_INFO_STATE_SHIFT) - 1))
	123	#define BLOCK_INFO_STATE(block_info) \
	124	((block_info) >> BLOCK_INFO_STATE_SHIFT)
	125	#define BLOCK_INFO(state, trim_cycles) \
	126	((trim_cycles) \| ((state) << BLOCK_INFO_STATE_SHIFT))
	127	#define BLOCK_INFO_SET_STATE(block_info, state) \
	128	BLOCK_INFO(state, BLOCK_INFO_TRIMS(block_info))
	129	enum block_info_state {
	130	BLOCK_STATE_UNINIT,
	131	BLOCK_STATE_TRIMMED,
	132	BLOCK_STATE_WRITTEN,
	133	BLOCK_STATE_TRIM_FAILURE,
	134	BLOCK_STATE_WRITE_FAILURE,
	135	BLOCK_STATE_COUNT,
	136	};
	137
	138	#define MAX_PATTERN_SIZE 512
	139	#define FIO_JOBNAME_SIZE 128
	140	#define FIO_JOBDESC_SIZE 256
	141	#define FIO_VERROR_SIZE 128
	142
	143	struct thread_stat {
	144	char name[FIO_JOBNAME_SIZE];
	145	char verror[FIO_VERROR_SIZE];
	146	uint32_t error;
	147	uint32_t thread_number;
	148	uint32_t groupid;
	149	uint32_t pid;
	150	char description[FIO_JOBDESC_SIZE];
	151	uint32_t members;
	152	uint32_t unified_rw_rep;
	153
	154	/*
	155	* bandwidth and latency stats
	156	*/
	157	struct io_stat clat_stat[DDIR_RWDIR_CNT]; /* completion latency */
	158	struct io_stat slat_stat[DDIR_RWDIR_CNT]; /* submission latency */
	159	struct io_stat lat_stat[DDIR_RWDIR_CNT]; /* total latency */
	160	struct io_stat bw_stat[DDIR_RWDIR_CNT]; /* bandwidth stats */
	161	struct io_stat iops_stat[DDIR_RWDIR_CNT]; /* IOPS stats */
	162
	163	/*
	164	* fio system usage accounting
	165	*/
	166	uint64_t usr_time;
	167	uint64_t sys_time;
	168	uint64_t ctx;
	169	uint64_t minf, majf;
	170
	171	/*
	172	* IO depth and latency stats
	173	*/
	174	uint64_t clat_percentiles;
	175	uint64_t percentile_precision;
	176	fio_fp64_t percentile_list[FIO_IO_U_LIST_MAX_LEN];
	177
	178	uint32_t io_u_map[FIO_IO_U_MAP_NR];
	179	uint32_t io_u_submit[FIO_IO_U_MAP_NR];
	180	uint32_t io_u_complete[FIO_IO_U_MAP_NR];
	181	uint32_t io_u_lat_u[FIO_IO_U_LAT_U_NR];
	182	uint32_t io_u_lat_m[FIO_IO_U_LAT_M_NR];
	183	uint32_t io_u_plat[DDIR_RWDIR_CNT][FIO_IO_U_PLAT_NR];
	184	uint32_t pad;
	185
	186	uint64_t total_io_u[DDIR_RWDIR_CNT];
	187	uint64_t short_io_u[DDIR_RWDIR_CNT];
	188	uint64_t drop_io_u[DDIR_RWDIR_CNT];
	189	uint64_t total_submit;
	190	uint64_t total_complete;
	191
	192	uint64_t io_bytes[DDIR_RWDIR_CNT];
	193	uint64_t runtime[DDIR_RWDIR_CNT];
	194	uint64_t total_run_time;
	195
	196	/*
	197	* IO Error related stats
	198	*/
	199	union {
	200	uint16_t continue_on_error;
	201	uint64_t pad2;
	202	};
	203	uint64_t total_err_count;
	204	uint32_t first_error;
	205
	206	uint64_t nr_block_infos;
	207	uint32_t block_infos[MAX_NR_BLOCK_INFOS];
	208
	209	uint32_t kb_base;
	210	uint32_t unit_base;
	211
	212	uint32_t latency_depth;
	213	uint64_t latency_target;
	214	fio_fp64_t latency_percentile;
	215	uint64_t latency_window;
	216
	217	struct steadystate_data *ss;
	218	} __attribute__((packed));
	219
	220	struct jobs_eta {
	221	uint32_t nr_running;
	222	uint32_t nr_ramp;
	223
	224	uint32_t nr_pending;
	225	uint32_t nr_setting_up;
	226
	227	uint32_t files_open;
	228
	229	uint32_t m_rate[DDIR_RWDIR_CNT], t_rate[DDIR_RWDIR_CNT];
	230	uint32_t m_iops[DDIR_RWDIR_CNT], t_iops[DDIR_RWDIR_CNT];
	231	uint32_t rate[DDIR_RWDIR_CNT];
	232	uint32_t iops[DDIR_RWDIR_CNT];
	233	uint64_t elapsed_sec;
	234	uint64_t eta_sec;
	235	uint32_t is_pow2;
	236	uint32_t unit_base;
	237
	238	/*
	239	* Network 'copy' of run_str[]
	240	*/
	241	uint32_t nr_threads;
	242	uint8_t run_str[];
	243	} __attribute__((packed));
	244
	245	extern struct fio_mutex *stat_mutex;
	246
	247	extern struct jobs_eta get_jobs_eta(bool force, size_t size);
	248
	249	extern void stat_init(void);
	250	extern void stat_exit(void);
	251
	252	extern struct json_object * show_thread_status(struct thread_stat ts, struct group_run_stats rs, struct flist_head , struct buf_output );
	253	extern void show_group_stats(struct group_run_stats rs, struct buf_output );
	254	extern int calc_thread_status(struct jobs_eta *je, int force);
	255	extern void display_thread_status(struct jobs_eta *je);
	256	extern void show_run_stats(void);
	257	extern void __show_run_stats(void);
	258	extern void __show_running_run_stats(void);
	259	extern void show_running_run_stats(void);
	260	extern void check_for_running_stats(void);
	261	extern void sum_thread_stats(struct thread_stat dst, struct thread_stat src, bool first);
	262	extern void sum_group_stats(struct group_run_stats dst, struct group_run_stats src);
	263	extern void init_thread_stat(struct thread_stat *ts);
	264	extern void init_group_run_stat(struct group_run_stats *gs);
	265	extern void eta_to_str(char *str, unsigned long eta_sec);
	266	extern int calc_lat(struct io_stat is, unsigned long min, unsigned long max, double mean, double *dev);
	267	extern unsigned int calc_clat_percentiles(unsigned int io_u_plat, unsigned long nr, fio_fp64_t plist, unsigned int *output, unsigned int maxv, unsigned int *minv);
	268	extern void stat_calc_lat_m(struct thread_stat ts, double io_u_lat);
	269	extern void stat_calc_lat_u(struct thread_stat ts, double io_u_lat);
	270	extern void stat_calc_dist(unsigned int map, unsigned long total, double io_u_dist);
	271	extern void reset_io_stats(struct thread_data *);
	272	extern void update_rusage_stat(struct thread_data *);
	273	extern void clear_rusage_stat(struct thread_data *);
	274
	275	extern void add_lat_sample(struct thread_data *, enum fio_ddir, unsigned long,
	276	unsigned int, uint64_t);
	277	extern void add_clat_sample(struct thread_data *, enum fio_ddir, unsigned long,
	278	unsigned int, uint64_t);
	279	extern void add_slat_sample(struct thread_data *, enum fio_ddir, unsigned long,
	280	unsigned int, uint64_t);
	281	extern void add_agg_sample(unsigned long, enum fio_ddir, unsigned int);
	282	extern void add_iops_sample(struct thread_data , struct io_u ,
	283	unsigned int);
	284	extern void add_bw_sample(struct thread_data , struct io_u ,
	285	unsigned int, unsigned long);
	286	extern int calc_log_samples(void);
	287
	288	extern struct io_log *agg_io_log[DDIR_RWDIR_CNT];
	289	extern int write_bw_log;
	290
	291	static inline int usec_to_msec(unsigned long min, unsigned long max,
	292	double mean, double dev)
	293	{
	294	if (min > 1000 && max > 1000 && mean > 1000.0 && dev > 1000.0) {
	295	*min /= 1000;
	296	*max /= 1000;
	297	*mean /= 1000.0;
	298	*dev /= 1000.0;
	299	return 0;
	300	}
	301
	302	return 1;
	303	}
	304	/*
	305	* Worst level condensing would be 1:5, so allow enough room for that
	306	*/
	307	#define __THREAD_RUNSTR_SZ(nr) ((nr) * 5)
	308	#define THREAD_RUNSTR_SZ __THREAD_RUNSTR_SZ(thread_number)
	309
	310	uint32_t io_u_block_info(struct thread_data td, struct io_u *io_u);
	311
	312	#endif