-.TH fio 1 "September 2007" "User Manual"
+.TH fio 1 "October 2013" "User Manual"
.SH NAME
fio \- flexible I/O tester
.SH SYNOPSIS
.BI \-\-output \fR=\fPfilename
Write output to \fIfilename\fR.
.TP
-.BI \-\-timeout \fR=\fPtimeout
-Limit run time to \fItimeout\fR seconds.
+.BI \-\-runtime \fR=\fPruntime
+Limit run time to \fIruntime\fR seconds.
.TP
.B \-\-latency\-log
Generate per-job latency logs.
.B \-\-help
Display usage information and exit.
.TP
+.B \-\-cpuclock-test
+Perform test and validation of internal CPU clock
+.TP
+.BI \-\-crctest[\fR=\fPtest]
+Test the speed of the builtin checksumming functions. If no argument is given,
+all of them are tested. Or a comma separated list can be passed, in which
+case the given ones are tested.
+.TP
.BI \-\-cmdhelp \fR=\fPcommand
Print help information for \fIcommand\fR. May be `all' for all commands.
.TP
.BI \-\-showcmd \fR=\fPjobfile
Convert \fIjobfile\fR to a set of command-line options.
.TP
-.B \-\-readonly
-Enable read-only safety checks.
-.TP
.BI \-\-eta \fR=\fPwhen
Specifies when real-time ETA estimate should be printed. \fIwhen\fR may
be one of `always', `never' or `auto'.
.TP
+.BI \-\-eta\-newline \fR=\fPtime
+Force an ETA newline for every `time` period passed.
+.TP
+.BI \-\-status\-interval \fR=\fPtime
+Report full output status every `time` period passed.
+.TP
.BI \-\-readonly
Turn on safety read-only checks, preventing any attempted write.
.TP
.TP
.BI \-\-client \fR=\fPhost
Instead of running the jobs locally, send and run them on the given host.
+.TP
+.BI \-\-idle\-prof \fR=\fPoption
+Report cpu idleness on a system or percpu basis (\fIoption\fP=system,percpu) or run unit work calibration only (\fIoption\fP=calibrate).
.SH "JOB FILE FORMAT"
Job files are in `ini' format. They consist of one or more
job definitions, which begin with a job name in square brackets and
.TP
.I float_list
List of floating numbers: A list of floating numbers, separated by
-a ':' charcater.
+a ':' character.
.SS "Parameter List"
.TP
.BI name \fR=\fPstr
reserved name, meaning stdin or stdout, depending on the read/write direction
set.
.TP
+.BI filename_format \fR=\fPstr
+If sharing multiple files between jobs, it is usually necessary to have
+fio generate the exact names that you want. By default, fio will name a file
+based on the default file format specification of
+\fBjobname.jobnumber.filenumber\fP. With this option, that can be
+customized. Fio will recognize and replace the following keywords in this
+string:
+.RS
+.RS
+.TP
+.B $jobname
+The name of the worker thread or process.
+.TP
+.B $jobnum
+The incremental number of the worker thread or process.
+.TP
+.B $filenum
+The incremental number of the file for that worker thread or process.
+.RE
+.P
+To have dependent jobs share a set of files, this option can be set to
+have fio generate filenames that are shared between the two. For instance,
+if \fBtestfiles.$filenum\fR is specified, file number 4 for any job will
+be named \fBtestfiles.4\fR. The default of \fB$jobname.$jobnum.$filenum\fR
+will be used if no other format specifier is given.
+.RE
+.P
+.TP
.BI lockfile \fR=\fPstr
Fio defaults to not locking any files before it does IO to them. If a file or
file descriptor is shared, fio can serialize IO to that file to make the end
Read-write locking on the file. Many readers may access the file at the same
time, but writes get exclusive access.
.RE
-.P
-The option may be post-fixed with a lock batch number. If set, then each
-thread/process may do that amount of IOs to the file before giving up the lock.
-Since lock acquisition is expensive, batching the lock/unlocks will speed up IO.
.RE
.P
.BI opendir \fR=\fPstr
.B write
Sequential writes.
.TP
+.B trim
+Sequential trim (Linux block devices only).
+.TP
.B randread
Random reads.
.TP
.B randwrite
Random writes.
.TP
+.B randtrim
+Random trim (Linux block devices only).
+.TP
.B rw, readwrite
Mixed sequential reads and writes.
.TP
.BI kb_base \fR=\fPint
The base unit for a kilobyte. The defacto base is 2^10, 1024. Storage
manufacturers like to use 10^3 or 1000 as a base ten unit instead, for obvious
-reasons. Allow values are 1024 or 1000, with 1024 being the default.
+reasons. Allowed values are 1024 or 1000, with 1024 being the default.
+.TP
+.BI unified_rw_reporting \fR=\fPbool
+Fio normally reports statistics on a per data direction basis, meaning that
+read, write, and trim are accounted and reported separately. If this option is
+set, the fio will sum the results and report them as "mixed" instead.
.TP
.BI randrepeat \fR=\fPbool
Seed the random number generator in a predictable way so results are repeatable
across runs. Default: true.
.TP
+.BI randseed \fR=\fPint
+Seed the random number generators based on this seed value, to be able to
+control what sequence of output is being generated. If not set, the random
+sequence depends on the \fBrandrepeat\fR setting.
+.TP
.BI use_os_rand \fR=\fPbool
Fio can either use the random generator supplied by the OS to generator random
offsets, or it can use it's own internal generator (based on Tausworthe).
Do not pre-allocate space.
.TP
.B posix
-Pre-allocate via posix_fallocate().
+Pre-allocate via \fBposix_fallocate\fR\|(3).
.TP
.B keep
-Pre-allocate via fallocate() with FALLOC_FL_KEEP_SIZE set.
+Pre-allocate via \fBfallocate\fR\|(2) with FALLOC_FL_KEEP_SIZE set.
.TP
.B 0
Backward-compatible alias for 'none'.
.RE
.TP
.BI fadvise_hint \fR=\fPbool
-Use of \fIposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
+Use of \fBposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
are likely to be issued. Default: true.
.TP
.BI size \fR=\fPint
Total size of I/O for this job. \fBfio\fR will run until this many bytes have
-been transfered, unless limited by other options (\fBruntime\fR, for instance).
+been transferred, unless limited by other options (\fBruntime\fR, for instance).
Unless \fBnrfiles\fR and \fBfilesize\fR options are given, this amount will be
divided between the available files for the job. If not set, fio will use the
-full size of the given files or devices. If the the files do not exist, size
+full size of the given files or devices. If the files do not exist, size
must be given. It is also possible to give size as a percentage between 1 and
100. If size=20% is given, fio will use 20% of the full size of the given files
or devices.
same size.
.TP
.BI blocksize \fR=\fPint[,int] "\fR,\fB bs" \fR=\fPint[,int]
-Block size for I/O units. Default: 4k. Values for reads and writes can be
-specified separately in the format \fIread\fR,\fIwrite\fR, either of
-which may be empty to leave that value at its default.
+Block size for I/O units. Default: 4k. Values for reads, writes, and trims
+can be specified separately in the format \fIread\fR,\fIwrite\fR,\fItrim\fR
+either of which may be empty to leave that value at its default. If a trailing
+comma isn't given, the remainder will inherit the last value set.
.TP
.BI blocksize_range \fR=\fPirange[,irange] "\fR,\fB bsrange" \fR=\fPirange[,irange]
Specify a range of I/O block sizes. The issued I/O unit will always be a
multiple of the minimum size, unless \fBblocksize_unaligned\fR is set. Applies
to both reads and writes if only one range is given, but can be specified
-separately with a comma seperating the values. Example: bsrange=1k-4k,2k-8k.
+separately with a comma separating the values. Example: bsrange=1k-4k,2k-8k.
Also (see \fBblocksize\fR).
.TP
.BI bssplit \fR=\fPstr
This option is mutually exclusive with using a random map for files, so it
will turn off that option.
.TP
+.BI bs_is_seq_rand \fR=\fPbool
+If this option is set, fio will use the normal read,write blocksize settings as
+sequential,random instead. Any random read or write will use the WRITE
+blocksize settings, and any sequential read or write will use the READ
+blocksize setting.
+.TP
.B zero_buffers
Initialise buffers with all zeros. Default: fill buffers with random data.
.TP
the remaining zeroed. With this set to some chunk size smaller than the block
size, fio can alternate random and zeroed data throughout the IO buffer.
.TP
+.BI buffer_pattern \fR=\fPstr
+If set, fio will fill the io buffers with this pattern. If not set, the contents
+of io buffers is defined by the other options related to buffer contents. The
+setting can be any pattern of bytes, and can be prefixed with 0x for hex
+values.
+.TP
.BI nrfiles \fR=\fPint
Number of files to use for this job. Default: 1.
.TP
.RS
.TP
.B random
-Choose a file at random
+Choose a file at random.
.TP
.B roundrobin
Round robin over open files (default).
+.TP
.B sequential
Do each file in the set sequentially.
.RE
.RS
.TP
.B sync
-Basic \fIread\fR\|(2) or \fIwrite\fR\|(2) I/O. \fIfseek\fR\|(2) is used to
+Basic \fBread\fR\|(2) or \fBwrite\fR\|(2) I/O. \fBfseek\fR\|(2) is used to
position the I/O location.
.TP
.B psync
-Basic \fIpread\fR\|(2) or \fIpwrite\fR\|(2) I/O.
+Basic \fBpread\fR\|(2) or \fBpwrite\fR\|(2) I/O.
.TP
.B vsync
-Basic \fIreadv\fR\|(2) or \fIwritev\fR\|(2) I/O. Will emulate queuing by
-coalescing adjacents IOs into a single submission.
+Basic \fBreadv\fR\|(2) or \fBwritev\fR\|(2) I/O. Will emulate queuing by
+coalescing adjacent IOs into a single submission.
+.TP
+.B pvsync
+Basic \fBpreadv\fR\|(2) or \fBpwritev\fR\|(2) I/O.
.TP
.B libaio
Linux native asynchronous I/O. This ioengine defines engine specific options.
.TP
.B posixaio
-POSIX asynchronous I/O using \fIaio_read\fR\|(3) and \fIaio_write\fR\|(3).
+POSIX asynchronous I/O using \fBaio_read\fR\|(3) and \fBaio_write\fR\|(3).
.TP
.B solarisaio
Solaris native asynchronous I/O.
Windows native asynchronous I/O.
.TP
.B mmap
-File is memory mapped with \fImmap\fR\|(2) and data copied using
-\fImemcpy\fR\|(3).
+File is memory mapped with \fBmmap\fR\|(2) and data copied using
+\fBmemcpy\fR\|(3).
.TP
.B splice
-\fIsplice\fR\|(2) is used to transfer the data and \fIvmsplice\fR\|(2) to
+\fBsplice\fR\|(2) is used to transfer the data and \fBvmsplice\fR\|(2) to
transfer data from user-space to the kernel.
.TP
.B syslet-rw
.TP
.B sg
SCSI generic sg v3 I/O. May be either synchronous using the SG_IO ioctl, or if
-the target is an sg character device, we use \fIread\fR\|(2) and
-\fIwrite\fR\|(2) for asynchronous I/O.
+the target is an sg character device, we use \fBread\fR\|(2) and
+\fBwrite\fR\|(2) for asynchronous I/O.
.TP
.B null
Doesn't transfer any data, just pretends to. Mainly used to exercise \fBfio\fR
This ioengine defines engine specific options.
.TP
.B netsplice
-Like \fBnet\fR, but uses \fIsplice\fR\|(2) and \fIvmsplice\fR\|(2) to map data
+Like \fBnet\fR, but uses \fBsplice\fR\|(2) and \fBvmsplice\fR\|(2) to map data
and send/receive. This ioengine defines engine specific options.
.TP
.B cpuio
.TP
.B guasi
The GUASI I/O engine is the Generic Userspace Asynchronous Syscall Interface
-approach to asycnronous I/O.
+approach to asynchronous I/O.
.br
See <http://www.xmailserver.org/guasi\-lib.html>.
.TP
.B external
Loads an external I/O engine object file. Append the engine filename as
`:\fIenginepath\fR'.
+.TP
+.B falloc
+ IO engine that does regular linux native fallocate call to simulate data
+transfer as fio ioengine
+.br
+ DDIR_READ does fallocate(,mode = FALLOC_FL_KEEP_SIZE,)
+.br
+ DIR_WRITE does fallocate(,mode = 0)
+.br
+ DDIR_TRIM does fallocate(,mode = FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE)
+.TP
+.B e4defrag
+IO engine that does regular EXT4_IOC_MOVE_EXT ioctls to simulate defragment activity
+request to DDIR_WRITE event
.RE
+.P
.RE
.TP
.BI iodepth \fR=\fPint
.BI direct \fR=\fPbool
If true, use non-buffered I/O (usually O_DIRECT). Default: false.
.TP
+.BI atomic \fR=\fPbool
+If value is true, attempt to use atomic direct IO. Atomic writes are guaranteed
+to be stable once acknowledged by the operating system. Only Linux supports
+O_ATOMIC right now.
+.TP
.BI buffered \fR=\fPbool
If true, use buffered I/O. This is the opposite of the \fBdirect\fR parameter.
Default: true.
there are several jobs which are intended to operate on a file in parallel in
disjoint segments, with even spacing between the starting points.
.TP
+.BI number_ios \fR=\fPint
+Fio will normally perform IOs until it has exhausted the size of the region
+set by \fBsize\fR, or if it exhaust the allocated time (or hits an error
+condition). With this setting, the range/size can be set independently of
+the number of IOs to perform. When fio reaches this number, it will exit
+normally and report status.
+.TP
.BI fsync \fR=\fPint
How many I/Os to perform before issuing an \fBfsync\fR\|(2) of dirty data. If
0, don't sync. Default: 0.
Like \fBfsync\fR, but uses \fBfdatasync\fR\|(2) instead to only sync the
data parts of the file. Default: 0.
.TP
+.BI write_barrier \fR=\fPint
+Make every Nth write a barrier write.
+.TP
.BI sync_file_range \fR=\fPstr:int
-Use sync_file_range() for every \fRval\fP number of write operations. Fio will
-track range of writes that have happened since the last sync_file_range() call.
+Use \fBsync_file_range\fR\|(2) for every \fRval\fP number of write operations. Fio will
+track range of writes that have happened since the last \fBsync_file_range\fR\|(2) call.
\fRstr\fP can currently be one or more of:
.RS
.TP
.P
So if you do sync_file_range=wait_before,write:8, fio would use
\fBSYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE\fP for every 8 writes.
-Also see the sync_file_range(2) man page. This option is Linux specific.
+Also see the \fBsync_file_range\fR\|(2) man page. This option is Linux specific.
.TP
.BI overwrite \fR=\fPbool
If writing, setup the file first and do overwrites. Default: false.
.TP
.BI end_fsync \fR=\fPbool
-Sync file contents when job exits. Default: false.
+Sync file contents when a write stage has completed. Default: false.
.TP
.BI fsync_on_close \fR=\fPbool
If true, sync file contents on close. This differs from \fBend_fsync\fR in that
asked to limit reads or writes to a certain rate. If that is the case, then
the distribution may be skewed. Default: 50.
.TP
+.BI random_distribution \fR=\fPstr:float
+By default, fio will use a completely uniform random distribution when asked
+to perform random IO. Sometimes it is useful to skew the distribution in
+specific ways, ensuring that some parts of the data is more hot than others.
+Fio includes the following distribution models:
+.RS
+.TP
+.B random
+Uniform random distribution
+.TP
+.B zipf
+Zipf distribution
+.TP
+.B pareto
+Pareto distribution
+.TP
+.RE
+.P
+When using a zipf or pareto distribution, an input value is also needed to
+define the access pattern. For zipf, this is the zipf theta. For pareto,
+it's the pareto power. Fio includes a test program, genzipf, that can be
+used visualize what the given input values will yield in terms of hit rates.
+If you wanted to use zipf with a theta of 1.2, you would use
+random_distribution=zipf:1.2 as the option. If a non-uniform model is used,
+fio will disable use of the random map.
+.TP
+.BI percentage_random \fR=\fPint
+For a random workload, set how big a percentage should be random. This defaults
+to 100%, in which case the workload is fully random. It can be set from
+anywhere from 0 to 100. Setting it to 0 would make the workload fully
+sequential. It is possible to set different values for reads, writes, and
+trim. To do so, simply use a comma separated list. See \fBblocksize\fR.
+.TP
.B norandommap
Normally \fBfio\fR will cover every block of the file when doing random I/O. If
this parameter is given, a new offset will be chosen without looking at past
random block map. As coverage will not be as complete as with random maps, this
option is disabled by default.
.TP
+.BI random_generator \fR=\fPstr
+Fio supports the following engines for generating IO offsets for random IO:
+.RS
+.TP
+.B tausworthe
+Strong 2^88 cycle random number generator
+.TP
+.B lfsr
+Linear feedback shift register generator
+.TP
+.RE
+.P
+Tausworthe is a strong random number generator, but it requires tracking on the
+side if we want to ensure that blocks are only read or written once. LFSR
+guarantees that we never generate the same offset twice, and it's also less
+computationally expensive. It's not a true random generator, however, though
+for IO purposes it's typically good enough. LFSR only works with single block
+sizes, not with workloads that use multiple block sizes. If used with such a
+workload, fio may read or write some blocks multiple times.
+.TP
.BI nice \fR=\fPint
-Run job with given nice value. See \fInice\fR\|(2).
+Run job with given nice value. See \fBnice\fR\|(2).
.TP
.BI prio \fR=\fPint
Set I/O priority value of this job between 0 (highest) and 7 (lowest). See
-\fIionice\fR\|(1).
+\fBionice\fR\|(1).
.TP
.BI prioclass \fR=\fPint
-Set I/O priority class. See \fIionice\fR\|(1).
+Set I/O priority class. See \fBionice\fR\|(1).
.TP
.BI thinktime \fR=\fPint
Stall job for given number of microseconds between issuing I/Os.
of the time specified by \fBthinktime\fR. Only valid if \fBthinktime\fR is set.
.TP
.BI thinktime_blocks \fR=\fPint
-Number of blocks to issue before waiting \fBthinktime\fR microseconds.
+Only valid if thinktime is set - control how many blocks to issue, before
+waiting \fBthinktime\fR microseconds. If not set, defaults to 1 which will
+make fio wait \fBthinktime\fR microseconds after every block. This
+effectively makes any queue depth setting redundant, since no more than 1 IO
+will be queued before we have to complete it and do our thinktime. In other
+words, this setting effectively caps the queue depth if the latter is larger.
Default: 1.
.TP
.BI rate \fR=\fPint
.BI rate_iops \fR=\fPint
Cap the bandwidth to this number of IOPS. Basically the same as rate, just
specified independently of bandwidth. The same format as \fBrate\fR is used for
-read vs write seperation. If \fBblocksize\fR is a range, the smallest block
+read vs write separation. If \fBblocksize\fR is a range, the smallest block
size is used as the metric.
.TP
.BI rate_iops_min \fR=\fPint
If this rate of I/O is not met, the job will exit. The same format as \fBrate\fR
-is used for read vs write seperation.
+is used for read vs write separation.
.TP
.BI ratecycle \fR=\fPint
Average bandwidth for \fBrate\fR and \fBratemin\fR over this number of
milliseconds. Default: 1000ms.
.TP
+.BI latency_target \fR=\fPint
+If set, fio will attempt to find the max performance point that the given
+workload will run at while maintaining a latency below this target. The
+values is given in microseconds. See \fBlatency_window\fR and
+\fBlatency_percentile\fR.
+.TP
+.BI latency_window \fR=\fPint
+Used with \fBlatency_target\fR to specify the sample window that the job
+is run at varying queue depths to test the performance. The value is given
+in microseconds.
+.TP
+.BI latency_percentile \fR=\fPfloat
+The percentage of IOs that must fall within the criteria specified by
+\fBlatency_target\fR and \fBlatency_window\fR. If not set, this defaults
+to 100.0, meaning that all IOs must be equal or below to the value set
+by \fBlatency_target\fR.
+.TP
+.BI max_latency \fR=\fPint
+If set, fio will exit the job if it exceeds this maximum latency. It will exit
+with an ETIME error.
+.TP
.BI cpumask \fR=\fPint
Set CPU affinity for this job. \fIint\fR is a bitmask of allowed CPUs the job
may run on. See \fBsched_setaffinity\fR\|(2).
.BI cpus_allowed \fR=\fPstr
Same as \fBcpumask\fR, but allows a comma-delimited list of CPU numbers.
.TP
+.BI numa_cpu_nodes \fR=\fPstr
+Set this job running on specified NUMA nodes' CPUs. The arguments allow
+comma delimited list of cpu numbers, A-B ranges, or 'all'.
+.TP
+.BI numa_mem_policy \fR=\fPstr
+Set this job's memory policy and corresponding NUMA nodes. Format of
+the arguments:
+.RS
+.TP
+.B <mode>[:<nodelist>]
+.TP
+.B mode
+is one of the following memory policy:
+.TP
+.B default, prefer, bind, interleave, local
+.TP
+.RE
+For \fBdefault\fR and \fBlocal\fR memory policy, no \fBnodelist\fR is
+needed to be specified. For \fBprefer\fR, only one node is
+allowed. For \fBbind\fR and \fBinterleave\fR, \fBnodelist\fR allows
+comma delimited list of numbers, A-B ranges, or 'all'.
+.TP
.BI startdelay \fR=\fPint
Delay start of job for the specified number of seconds.
.TP
.RS
.TP
.B malloc
-Allocate memory with \fImalloc\fR\|(3).
+Allocate memory with \fBmalloc\fR\|(3).
.TP
.B shm
-Use shared memory buffers allocated through \fIshmget\fR\|(2).
+Use shared memory buffers allocated through \fBshmget\fR\|(2).
.TP
.B shmhuge
Same as \fBshm\fR, but use huge pages as backing.
.TP
.B mmap
-Use \fImmap\fR\|(2) for allocation. Uses anonymous memory unless a filename
+Use \fBmmap\fR\|(2) for allocation. Uses anonymous memory unless a filename
is given after the option in the format `:\fIfile\fR'.
.TP
.B mmaphuge
.RE
.TP
.BI iomem_align \fR=\fPint "\fR,\fP mem_align" \fR=\fPint
-This indiciates the memory alignment of the IO memory buffers. Note that the
+This indicates the memory alignment of the IO memory buffers. Note that the
given alignment is applied to the first IO unit buffer, if using \fBiodepth\fR
the alignment of the following buffers are given by the \fBbs\fR used. In
other words, if using a \fBbs\fR that is a multiple of the page sized in the
If true, serialize file creation for the jobs. Default: true.
.TP
.BI create_fsync \fR=\fPbool
-\fIfsync\fR\|(2) data file after creation. Default: true.
+\fBfsync\fR\|(2) data file after creation. Default: true.
.TP
.BI create_on_open \fR=\fPbool
If true, the files are not created until they are opened for IO by the job.
Specifies the number of iterations (runs of the same workload) of this job.
Default: 1.
.TP
+.BI verify_only \fR=\fPbool
+Do not perform the specified workload, only verify data still matches previous
+invocation of this workload. This option allows one to check data multiple
+times at a later date without overwriting it. This option makes sense only for
+workloads that write data, and does not support workloads with the
+\fBtime_based\fR option set.
+.TP
.BI do_verify \fR=\fPbool
Run the verify phase after a write phase. Only valid if \fBverify\fR is set.
Default: true.
be of the newly written data.
.RE
.TP
-.BI verify_sort \fR=\fPbool
+.BI verifysort \fR=\fPbool
If true, written verify blocks are sorted if \fBfio\fR deems it to be faster to
read them back in a sorted manner. Default: true.
.TP
+.BI verifysort_nr \fR=\fPint
+Pre-load and sort verify blocks for a read workload.
+.TP
.BI verify_offset \fR=\fPint
Swap the verification header with data somewhere else in the block before
writing. It is swapped back before verifying.
\fBverify_backlog_batch\fR is larger than \fBverify_backlog\fR, some blocks
will be verified more than once.
.TP
+.BI trim_percentage \fR=\fPint
+Number of verify blocks to discard/trim.
+.TP
+.BI trim_verify_zero \fR=\fPbool
+Verify that trim/discarded blocks are returned as zeroes.
+.TP
+.BI trim_backlog \fR=\fPint
+Trim after this number of blocks are written.
+.TP
+.BI trim_backlog_batch \fR=\fPint
+Trim this number of IO blocks.
+.TP
+.BI experimental_verify \fR=\fPbool
+Enable experimental verification.
+.TP
.B stonewall "\fR,\fP wait_for_previous"
Wait for preceding jobs in the job file to exit before starting this one.
\fBstonewall\fR implies \fBnew_group\fR.
.BI zonesize \fR=\fPint
Divide file into zones of the specified size in bytes. See \fBzoneskip\fR.
.TP
+.BI zonerange \fR=\fPint
+Give size of an IO zone. See \fBzoneskip\fR.
+.TP
.BI zoneskip \fR=\fPint
Skip the specified number of bytes when \fBzonesize\fR bytes of data have been
read.
If given, write a bandwidth log of the jobs in this job file. Can be used to
store data of the bandwidth of the jobs in their lifetime. The included
fio_generate_plots script uses gnuplot to turn these text files into nice
-graphs. See \fBwrite_log_log\fR for behaviour of given filename. For this
+graphs. See \fBwrite_lat_log\fR for behaviour of given filename. For this
option, the postfix is _bw.log.
.TP
.BI write_lat_log \fR=\fPstr
.TP
.BI disable_lat \fR=\fPbool
Disable measurements of total latency numbers. Useful only for cutting
-back the number of calls to gettimeofday, as that does impact performance at
+back the number of calls to \fBgettimeofday\fR\|(2), as that does impact performance at
really high IOPS rates. Note that to really get rid of a large amount of these
calls, this option must be used with disable_slat and disable_bw as well.
.TP
.TP
.BI lockmem \fR=\fPint
Pin the specified amount of memory with \fBmlock\fR\|(2). Can be used to
-simulate a smaller amount of memory.
+simulate a smaller amount of memory. The amount specified is per worker.
.TP
.BI exec_prerun \fR=\fPstr
Before running the job, execute the specified command with \fBsystem\fR\|(3).
+.RS
+Output is redirected in a file called \fBjobname.prerun.txt\fR
+.RE
.TP
.BI exec_postrun \fR=\fPstr
Same as \fBexec_prerun\fR, but the command is executed after the job completes.
+.RS
+Output is redirected in a file called \fBjobname.postrun.txt\fR
+.RE
.TP
.BI ioscheduler \fR=\fPstr
Attempt to switch the device hosting the file to the specified I/O scheduler.
.BI disk_util \fR=\fPbool
Generate disk utilization statistics if the platform supports it. Default: true.
.TP
+.BI clocksource \fR=\fPstr
+Use the given clocksource as the base of timing. The supported options are:
+.RS
+.TP
+.B gettimeofday
+\fBgettimeofday\fR\|(2)
+.TP
+.B clock_gettime
+\fBclock_gettime\fR\|(2)
+.TP
+.B cpu
+Internal CPU clock source
+.TP
+.RE
+.P
+\fBcpu\fR is the preferred clocksource if it is reliable, as it is very fast
+(and fio is heavy on time calls). Fio will automatically use this clocksource
+if it's supported and considered reliable on the system it is running on,
+unless another clocksource is specifically set. For x86/x86-64 CPUs, this
+means supporting TSC Invariant.
+.TP
.BI gtod_reduce \fR=\fPbool
-Enable all of the gettimeofday() reducing options (disable_clat, disable_slat,
+Enable all of the \fBgettimeofday\fR\|(2) reducing options (disable_clat, disable_slat,
disable_bw) plus reduce precision of the timeout somewhat to really shrink the
-gettimeofday() call count. With this option enabled, we only do about 0.4% of
+\fBgettimeofday\fR\|(2) call count. With this option enabled, we only do about 0.4% of
the gtod() calls we would have done if all time keeping was enabled.
.TP
.BI gtod_cpu \fR=\fPint
Sometimes it's cheaper to dedicate a single thread of execution to just getting
the current time. Fio (and databases, for instance) are very intensive on
-gettimeofday() calls. With this option, you can set one CPU aside for doing
+\fBgettimeofday\fR\|(2) calls. With this option, you can set one CPU aside for doing
nothing but logging current time to a shared memory location. Then the other
threads/processes that run IO workloads need only copy that segment, instead of
-entering the kernel with a gettimeofday() call. The CPU set aside for doing
+entering the kernel with a \fBgettimeofday\fR\|(2) call. The CPU set aside for doing
these time calls will be excluded from other uses. Fio will manually clear it
from the CPU mask of other jobs.
.TP
+.BI ignore_error \fR=\fPstr
+Sometimes you want to ignore some errors during test in that case you can specify
+error list for each error type.
+.br
+ignore_error=READ_ERR_LIST,WRITE_ERR_LIST,VERIFY_ERR_LIST
+.br
+errors for given error type is separated with ':'.
+Error may be symbol ('ENOSPC', 'ENOMEM') or an integer.
+.br
+Example: ignore_error=EAGAIN,ENOSPC:122 .
+.br
+This option will ignore EAGAIN from READ, and ENOSPC and 122(EDQUOT) from WRITE.
+.TP
+.BI error_dump \fR=\fPbool
+If set dump every error even if it is non fatal, true by default. If disabled
+only fatal error will be dumped
+.TP
+.BI profile \fR=\fPstr
+Select a specific builtin performance test.
+.TP
.BI cgroup \fR=\fPstr
Add job to this control group. If it doesn't exist, it will be created.
The system must have a mounted cgroup blkio mount point for this to work. If
.BI gid \fR=\fPint
Set group ID, see \fBuid\fR.
.TP
+.BI unit_base \fR=\fPint
+Base unit for reporting. Allowed values are:
+.RS
+.TP
+.B 0
+Use auto-detection (default).
+.TP
+.B 8
+Byte based.
+.TP
+.B 1
+Bit based.
+.RE
+.P
+.TP
.BI flow_id \fR=\fPint
The ID of the flow. If not specified, it defaults to being a global flow. See
\fBflow\fR.
.BI (net,netsplice)hostname \fR=\fPstr
The host name or IP address to use for TCP or UDP based IO.
If the job is a TCP listener or UDP reader, the hostname is not
-used and must be omitted.
+used and must be omitted unless it is a valid UDP multicast address.
.TP
.BI (net,netsplice)port \fR=\fPint
The TCP or UDP port to bind to or connect to.
.TP
+.BI (net,netsplice)interface \fR=\fPstr
+The IP address of the network interface used to send or receive UDP multicast
+packets.
+.TP
+.BI (net,netsplice)ttl \fR=\fPint
+Time-to-live value for outgoing UDP multicast packets. Default: 1
+.TP
+.BI (net,netsplice)nodelay \fR=\fPbool
+Set TCP_NODELAY on TCP connections.
+.TP
.BI (net,netsplice)protocol \fR=\fPstr "\fR,\fP proto" \fR=\fPstr
The network protocol to use. Accepted values are:
.RS
.B tcp
Transmission control protocol
.TP
+.B tcpv6
+Transmission control protocol V6
+.TP
.B udp
-Unreliable datagram protocol
+User datagram protocol
+.TP
+.B udpv6
+User datagram protocol V6
.TP
.B unix
UNIX domain socket
For TCP network connections, tell fio to listen for incoming
connections rather than initiating an outgoing connection. The
hostname must be omitted if this option is used.
+.TP
+.BI (net, pingpong) \fR=\fPbool
+Normally a network writer will just continue writing data, and a network reader
+will just consume packages. If pingpong=1 is set, a writer will send its normal
+payload to the reader, then wait for the reader to send the same payload back.
+This allows fio to measure network latencies. The submission and completion
+latencies then measure local time spent sending or receiving, and the
+completion latency measures how long it took for the other end to receive and
+send back. For UDP multicast traffic pingpong=1 should only be set for a single
+reader when multiple readers are listening to the same address.
+.TP
+.BI (e4defrag,donorname) \fR=\fPstr
+File will be used as a block donor (swap extents between files)
+.TP
+.BI (e4defrag,inplace) \fR=\fPint
+Configure donor file block allocation strategy
+.RS
+.BI 0(default) :
+Preallocate donor's file on init
+.TP
+.BI 1:
+allocate space immediately inside defragment event, and free right after event
+.RE
.SH OUTPUT
While running, \fBfio\fR will display the status of the created jobs. For
example: