Commit | Line | Data |
---|---|---|
d60e92d1 AC |
1 | .TH fio 1 "September 2007" "User Manual" |
2 | .SH NAME | |
3 | fio \- flexible I/O tester | |
4 | .SH SYNOPSIS | |
5 | .B fio | |
6 | [\fIoptions\fR] [\fIjobfile\fR]... | |
7 | .SH DESCRIPTION | |
8 | .B fio | |
9 | is a tool that will spawn a number of threads or processes doing a | |
10 | particular type of I/O action as specified by the user. | |
11 | The typical use of fio is to write a job file matching the I/O load | |
12 | one wants to simulate. | |
13 | .SH OPTIONS | |
14 | .TP | |
15 | .BI \-\-output \fR=\fPfilename | |
16 | Write output to \fIfilename\fR. | |
17 | .TP | |
18 | .BI \-\-timeout \fR=\fPtimeout | |
19 | Limit run time to \fItimeout\fR seconds. | |
20 | .TP | |
21 | .B \-\-latency\-log | |
22 | Generate per-job latency logs. | |
23 | .TP | |
24 | .B \-\-bandwidth\-log | |
25 | Generate per-job bandwidth logs. | |
26 | .TP | |
27 | .B \-\-minimal | |
d1429b5c | 28 | Print statistics in a terse, semicolon-delimited format. |
d60e92d1 AC |
29 | .TP |
30 | .BI \-\-showcmd \fR=\fPjobfile | |
31 | Convert \fIjobfile\fR to a set of command-line options. | |
32 | .TP | |
33 | .B \-\-readonly | |
34 | Enable read-only safety checks. | |
35 | .TP | |
36 | .BI \-\-eta \fR=\fPwhen | |
37 | Specifies when real-time ETA estimate should be printed. \fIwhen\fR may | |
38 | be one of `always', `never' or `auto'. | |
39 | .TP | |
c0a5d35e AC |
40 | .BI \-\-section \fR=\fPsec |
41 | Only run section \fIsec\fR from job file. | |
42 | .TP | |
d60e92d1 AC |
43 | .BI \-\-cmdhelp \fR=\fPcommand |
44 | Print help information for \fIcommand\fR. May be `all' for all commands. | |
45 | .TP | |
9183788d JA |
46 | .BI \-\-debug \fR=\fPtype |
47 | Enable verbose tracing of various fio actions. May be `all' for all types | |
c6e13ea5 | 48 | or individual types seperated by a comma (eg \-\-debug=io,file). `help' will |
9183788d JA |
49 | list all available tracing options. |
50 | .TP | |
d60e92d1 AC |
51 | .B \-\-help |
52 | Display usage information and exit. | |
53 | .TP | |
54 | .B \-\-version | |
55 | Display version information and exit. | |
56 | .SH "JOB FILE FORMAT" | |
57 | Job files are in `ini' format. They consist of one or more | |
58 | job definitions, which begin with a job name in square brackets and | |
59 | extend to the next job name. The job name can be any ASCII string | |
60 | except `global', which has a special meaning. Following the job name is | |
61 | a sequence of zero or more parameters, one per line, that define the | |
62 | behavior of the job. Any line starting with a `;' or `#' character is | |
d1429b5c | 63 | considered a comment and ignored. |
d9956b64 AC |
64 | .P |
65 | If \fIjobfile\fR is specified as `-', the job file will be read from | |
66 | standard input. | |
d60e92d1 AC |
67 | .SS "Global Section" |
68 | The global section contains default parameters for jobs specified in the | |
69 | job file. A job is only affected by global sections residing above it, | |
70 | and there may be any number of global sections. Specific job definitions | |
71 | may override any parameter set in global sections. | |
72 | .SH "JOB PARAMETERS" | |
73 | .SS Types | |
74 | Some parameters may take arguments of a specific type. The types used are: | |
75 | .TP | |
76 | .I str | |
77 | String: a sequence of alphanumeric characters. | |
78 | .TP | |
79 | .I int | |
d60e92d1 | 80 | SI integer: a whole number, possibly containing a suffix denoting the base unit |
b09da8fa JA |
81 | of the value. Accepted suffixes are `k', 'M', 'G', 'T', and 'P', denoting |
82 | kilo (1024), mega (1024^2), giga (1024^3), tera (1024^4), and peta (1024^5) | |
83 | respectively. The suffix is not case sensitive. If prefixed with '0x', the | |
57fc29fa JA |
84 | value is assumed to be base 16 (hexadecimal). A suffix may include a trailing |
85 | 'b', for instance 'kb' is identical to 'k'. You can specify a base 10 value | |
86 | by using 'KiB', 'MiB', 'GiB', etc. This is useful for disk drives where | |
87 | values are often given in base 10 values. Specifying '30GiB' will get you | |
88 | 30*1000^3 bytes. | |
d60e92d1 AC |
89 | .TP |
90 | .I bool | |
91 | Boolean: a true or false value. `0' denotes false, `1' denotes true. | |
92 | .TP | |
93 | .I irange | |
94 | Integer range: a range of integers specified in the format | |
d1429b5c AC |
95 | \fIlower\fR:\fIupper\fR or \fIlower\fR\-\fIupper\fR. \fIlower\fR and |
96 | \fIupper\fR may contain a suffix as described above. If an option allows two | |
97 | sets of ranges, they are separated with a `,' or `/' character. For example: | |
98 | `8\-8k/8M\-4G'. | |
d60e92d1 AC |
99 | .SS "Parameter List" |
100 | .TP | |
101 | .BI name \fR=\fPstr | |
d9956b64 | 102 | May be used to override the job name. On the command line, this parameter |
d60e92d1 AC |
103 | has the special purpose of signalling the start of a new job. |
104 | .TP | |
105 | .BI description \fR=\fPstr | |
106 | Human-readable description of the job. It is printed when the job is run, but | |
107 | otherwise has no special purpose. | |
108 | .TP | |
109 | .BI directory \fR=\fPstr | |
110 | Prefix filenames with this directory. Used to place files in a location other | |
111 | than `./'. | |
112 | .TP | |
113 | .BI filename \fR=\fPstr | |
114 | .B fio | |
115 | normally makes up a file name based on the job name, thread number, and file | |
d1429b5c AC |
116 | number. If you want to share files between threads in a job or several jobs, |
117 | specify a \fIfilename\fR for each of them to override the default. If the I/O | |
118 | engine used is `net', \fIfilename\fR is the host and port to connect to in the | |
119 | format \fIhost\fR/\fIport\fR. If the I/O engine is file-based, you can specify | |
120 | a number of files by separating the names with a `:' character. `\-' is a | |
121 | reserved name, meaning stdin or stdout, depending on the read/write direction | |
122 | set. | |
d60e92d1 | 123 | .TP |
3ce9dcaf JA |
124 | .BI lockfile \fR=\fPstr |
125 | Fio defaults to not locking any files before it does IO to them. If a file or | |
126 | file descriptor is shared, fio can serialize IO to that file to make the end | |
127 | result consistent. This is usual for emulating real workloads that share files. | |
128 | The lock modes are: | |
129 | .RS | |
130 | .RS | |
131 | .TP | |
132 | .B none | |
133 | No locking. This is the default. | |
134 | .TP | |
135 | .B exclusive | |
136 | Only one thread or process may do IO at the time, excluding all others. | |
137 | .TP | |
138 | .B readwrite | |
139 | Read-write locking on the file. Many readers may access the file at the same | |
140 | time, but writes get exclusive access. | |
141 | .RE | |
142 | .P | |
143 | The option may be post-fixed with a lock batch number. If set, then each | |
144 | thread/process may do that amount of IOs to the file before giving up the lock. | |
145 | Since lock acquisition is expensive, batching the lock/unlocks will speed up IO. | |
146 | .RE | |
147 | .P | |
d60e92d1 AC |
148 | .BI opendir \fR=\fPstr |
149 | Recursively open any files below directory \fIstr\fR. | |
150 | .TP | |
151 | .BI readwrite \fR=\fPstr "\fR,\fP rw" \fR=\fPstr | |
152 | Type of I/O pattern. Accepted values are: | |
153 | .RS | |
154 | .RS | |
155 | .TP | |
156 | .B read | |
d1429b5c | 157 | Sequential reads. |
d60e92d1 AC |
158 | .TP |
159 | .B write | |
d1429b5c | 160 | Sequential writes. |
d60e92d1 AC |
161 | .TP |
162 | .B randread | |
d1429b5c | 163 | Random reads. |
d60e92d1 AC |
164 | .TP |
165 | .B randwrite | |
d1429b5c | 166 | Random writes. |
d60e92d1 AC |
167 | .TP |
168 | .B rw | |
d1429b5c | 169 | Mixed sequential reads and writes. |
d60e92d1 AC |
170 | .TP |
171 | .B randrw | |
d1429b5c | 172 | Mixed random reads and writes. |
d60e92d1 AC |
173 | .RE |
174 | .P | |
d1429b5c AC |
175 | For mixed I/O, the default split is 50/50. For random I/O, the number of I/Os |
176 | to perform before getting a new offset can be specified by appending | |
177 | `:\fIint\fR' to the pattern type. The default is 1. | |
d60e92d1 AC |
178 | .RE |
179 | .TP | |
90fef2d1 JA |
180 | .BI kb_base \fR=\fPint |
181 | The base unit for a kilobyte. The defacto base is 2^10, 1024. Storage | |
182 | manufacturers like to use 10^3 or 1000 as a base ten unit instead, for obvious | |
183 | reasons. Allow values are 1024 or 1000, with 1024 being the default. | |
184 | .TP | |
d60e92d1 AC |
185 | .BI randrepeat \fR=\fPbool |
186 | Seed the random number generator in a predictable way so results are repeatable | |
d1429b5c | 187 | across runs. Default: true. |
d60e92d1 | 188 | .TP |
7bc8c2cf JA |
189 | .BI fallocate \fR=\fPbool |
190 | By default, fio will use fallocate() to advise the system of the size of the | |
191 | file we are going to write. This can be turned off with fallocate=0. May not | |
192 | be available on all supported platforms. | |
193 | .TP | |
d60e92d1 | 194 | .BI fadvise_hint \fR=\fPbool |
d1429b5c AC |
195 | Disable use of \fIposix_fadvise\fR\|(2) to advise the kernel what I/O patterns |
196 | are likely to be issued. Default: true. | |
d60e92d1 | 197 | .TP |
f7fa2653 | 198 | .BI size \fR=\fPint |
d60e92d1 AC |
199 | Total size of I/O for this job. \fBfio\fR will run until this many bytes have |
200 | been transfered, unless limited by other options (\fBruntime\fR, for instance). | |
201 | Unless \fBnr_files\fR and \fBfilesize\fR options are given, this amount will be | |
d6667268 JA |
202 | divided between the available files for the job. If not set, fio will use the |
203 | full size of the given files or devices. If the the files do not exist, size | |
204 | must be given. | |
d60e92d1 | 205 | .TP |
3ce9dcaf JA |
206 | .BI fill_device \fR=\fPbool |
207 | Sets size to something really large and waits for ENOSPC (no space left on | |
208 | device) as the terminating condition. Only makes sense with sequential write. | |
209 | For a read workload, the mount point will be filled first then IO started on | |
210 | the result. | |
211 | .TP | |
d60e92d1 AC |
212 | .BI filesize \fR=\fPirange |
213 | Individual file sizes. May be a range, in which case \fBfio\fR will select sizes | |
d1429b5c AC |
214 | for files at random within the given range, limited to \fBsize\fR in total (if |
215 | that is given). If \fBfilesize\fR is not specified, each created file is the | |
216 | same size. | |
d60e92d1 | 217 | .TP |
f7fa2653 | 218 | .BI blocksize \fR=\fPint[,int] "\fR,\fB bs" \fR=\fPint[,int] |
d60e92d1 | 219 | Block size for I/O units. Default: 4k. Values for reads and writes can be |
656ebab7 | 220 | specified separately in the format \fIread\fR,\fIwrite\fR, either of |
d60e92d1 AC |
221 | which may be empty to leave that value at its default. |
222 | .TP | |
9183788d | 223 | .BI blocksize_range \fR=\fPirange[,irange] "\fR,\fB bsrange" \fR=\fPirange[,irange] |
d1429b5c AC |
224 | Specify a range of I/O block sizes. The issued I/O unit will always be a |
225 | multiple of the minimum size, unless \fBblocksize_unaligned\fR is set. Applies | |
9183788d | 226 | to both reads and writes if only one range is given, but can be specified |
656ebab7 | 227 | separately with a comma seperating the values. Example: bsrange=1k-4k,2k-8k. |
9183788d JA |
228 | Also (see \fBblocksize\fR). |
229 | .TP | |
230 | .BI bssplit \fR=\fPstr | |
231 | This option allows even finer grained control of the block sizes issued, | |
232 | not just even splits between them. With this option, you can weight various | |
233 | block sizes for exact control of the issued IO for a job that has mixed | |
234 | block sizes. The format of the option is bssplit=blocksize/percentage, | |
235 | optionally adding as many definitions as needed seperated by a colon. | |
236 | Example: bssplit=4k/10:64k/50:32k/40 would issue 50% 64k blocks, 10% 4k | |
c83cdd3e JA |
237 | blocks and 40% 32k blocks. \fBbssplit\fR also supports giving separate |
238 | splits to reads and writes. The format is identical to what the | |
239 | \fBbs\fR option accepts, the read and write parts are separated with a | |
240 | comma. | |
d60e92d1 AC |
241 | .TP |
242 | .B blocksize_unaligned\fR,\fP bs_unaligned | |
d1429b5c AC |
243 | If set, any size in \fBblocksize_range\fR may be used. This typically won't |
244 | work with direct I/O, as that normally requires sector alignment. | |
d60e92d1 | 245 | .TP |
2b7a01d0 | 246 | .BI blockalign \fR=\fPint[,int] "\fR,\fB ba" \fR=\fPint[,int] |
639ce0f3 MS |
247 | At what boundary to align random IO offsets. Defaults to the same as 'blocksize' |
248 | the minimum blocksize given. Minimum alignment is typically 512b | |
2b7a01d0 JA |
249 | for using direct IO, though it usually depends on the hardware block size. |
250 | This option is mutually exclusive with using a random map for files, so it | |
251 | will turn off that option. | |
43602667 | 252 | .TP |
d60e92d1 AC |
253 | .B zero_buffers |
254 | Initialise buffers with all zeros. Default: fill buffers with random data. | |
255 | .TP | |
901bb994 JA |
256 | .B refill_buffers |
257 | If this option is given, fio will refill the IO buffers on every submit. The | |
258 | default is to only fill it at init time and reuse that data. Only makes sense | |
259 | if zero_buffers isn't specified, naturally. If data verification is enabled, | |
260 | refill_buffers is also automatically enabled. | |
261 | .TP | |
d60e92d1 AC |
262 | .BI nrfiles \fR=\fPint |
263 | Number of files to use for this job. Default: 1. | |
264 | .TP | |
265 | .BI openfiles \fR=\fPint | |
266 | Number of files to keep open at the same time. Default: \fBnrfiles\fR. | |
267 | .TP | |
268 | .BI file_service_type \fR=\fPstr | |
269 | Defines how files to service are selected. The following types are defined: | |
270 | .RS | |
271 | .RS | |
272 | .TP | |
273 | .B random | |
274 | Choose a file at random | |
275 | .TP | |
276 | .B roundrobin | |
277 | Round robin over open files (default). | |
6b7f6851 JA |
278 | .B sequential |
279 | Do each file in the set sequentially. | |
d60e92d1 AC |
280 | .RE |
281 | .P | |
282 | The number of I/Os to issue before switching a new file can be specified by | |
283 | appending `:\fIint\fR' to the service type. | |
284 | .RE | |
285 | .TP | |
286 | .BI ioengine \fR=\fPstr | |
287 | Defines how the job issues I/O. The following types are defined: | |
288 | .RS | |
289 | .RS | |
290 | .TP | |
291 | .B sync | |
292 | Basic \fIread\fR\|(2) or \fIwrite\fR\|(2) I/O. \fIfseek\fR\|(2) is used to | |
293 | position the I/O location. | |
294 | .TP | |
a31041ea | 295 | .B psync |
296 | Basic \fIpread\fR\|(2) or \fIpwrite\fR\|(2) I/O. | |
297 | .TP | |
9183788d JA |
298 | .B vsync |
299 | Basic \fIreadv\fR\|(2) or \fIwritev\fR\|(2) I/O. Will emulate queuing by | |
300 | coalescing adjacents IOs into a single submission. | |
301 | .TP | |
d60e92d1 AC |
302 | .B libaio |
303 | Linux native asynchronous I/O. | |
304 | .TP | |
305 | .B posixaio | |
306 | glibc POSIX asynchronous I/O using \fIaio_read\fR\|(3) and \fIaio_write\fR\|(3). | |
307 | .TP | |
308 | .B mmap | |
d1429b5c AC |
309 | File is memory mapped with \fImmap\fR\|(2) and data copied using |
310 | \fImemcpy\fR\|(3). | |
d60e92d1 AC |
311 | .TP |
312 | .B splice | |
d1429b5c AC |
313 | \fIsplice\fR\|(2) is used to transfer the data and \fIvmsplice\fR\|(2) to |
314 | transfer data from user-space to the kernel. | |
d60e92d1 AC |
315 | .TP |
316 | .B syslet-rw | |
317 | Use the syslet system calls to make regular read/write asynchronous. | |
318 | .TP | |
319 | .B sg | |
320 | SCSI generic sg v3 I/O. May be either synchronous using the SG_IO ioctl, or if | |
d1429b5c AC |
321 | the target is an sg character device, we use \fIread\fR\|(2) and |
322 | \fIwrite\fR\|(2) for asynchronous I/O. | |
d60e92d1 AC |
323 | .TP |
324 | .B null | |
325 | Doesn't transfer any data, just pretends to. Mainly used to exercise \fBfio\fR | |
326 | itself and for debugging and testing purposes. | |
327 | .TP | |
328 | .B net | |
329 | Transfer over the network. \fBfilename\fR must be set appropriately to | |
330 | `\fIhost\fR/\fIport\fR' regardless of data direction. If receiving, only the | |
331 | \fIport\fR argument is used. | |
332 | .TP | |
333 | .B netsplice | |
334 | Like \fBnet\fR, but uses \fIsplice\fR\|(2) and \fIvmsplice\fR\|(2) to map data | |
335 | and send/receive. | |
336 | .TP | |
53aec0a4 | 337 | .B cpuio |
d60e92d1 AC |
338 | Doesn't transfer any data, but burns CPU cycles according to \fBcpuload\fR and |
339 | \fBcpucycles\fR parameters. | |
340 | .TP | |
341 | .B guasi | |
342 | The GUASI I/O engine is the Generic Userspace Asynchronous Syscall Interface | |
343 | approach to asycnronous I/O. | |
d1429b5c AC |
344 | .br |
345 | See <http://www.xmailserver.org/guasi\-lib.html>. | |
d60e92d1 AC |
346 | .TP |
347 | .B external | |
348 | Loads an external I/O engine object file. Append the engine filename as | |
349 | `:\fIenginepath\fR'. | |
350 | .RE | |
351 | .RE | |
352 | .TP | |
353 | .BI iodepth \fR=\fPint | |
354 | Number of I/O units to keep in flight against the file. Default: 1. | |
355 | .TP | |
356 | .BI iodepth_batch \fR=\fPint | |
357 | Number of I/Os to submit at once. Default: \fBiodepth\fR. | |
358 | .TP | |
3ce9dcaf JA |
359 | .BI iodepth_batch_complete \fR=\fPint |
360 | This defines how many pieces of IO to retrieve at once. It defaults to 1 which | |
361 | means that we'll ask for a minimum of 1 IO in the retrieval process from the | |
362 | kernel. The IO retrieval will go on until we hit the limit set by | |
363 | \fBiodepth_low\fR. If this variable is set to 0, then fio will always check for | |
364 | completed events before queuing more IO. This helps reduce IO latency, at the | |
365 | cost of more retrieval system calls. | |
366 | .TP | |
d60e92d1 AC |
367 | .BI iodepth_low \fR=\fPint |
368 | Low watermark indicating when to start filling the queue again. Default: | |
369 | \fBiodepth\fR. | |
370 | .TP | |
371 | .BI direct \fR=\fPbool | |
372 | If true, use non-buffered I/O (usually O_DIRECT). Default: false. | |
373 | .TP | |
374 | .BI buffered \fR=\fPbool | |
375 | If true, use buffered I/O. This is the opposite of the \fBdirect\fR parameter. | |
376 | Default: true. | |
377 | .TP | |
f7fa2653 | 378 | .BI offset \fR=\fPint |
d60e92d1 AC |
379 | Offset in the file to start I/O. Data before the offset will not be touched. |
380 | .TP | |
381 | .BI fsync \fR=\fPint | |
d1429b5c AC |
382 | How many I/Os to perform before issuing an \fBfsync\fR\|(2) of dirty data. If |
383 | 0, don't sync. Default: 0. | |
d60e92d1 | 384 | .TP |
5f9099ea JA |
385 | .BI fdatasync \fR=\fPint |
386 | Like \fBfsync\fR, but uses \fBfdatasync\fR\|(2) instead to only sync the | |
387 | data parts of the file. Default: 0. | |
388 | .TP | |
e76b1da4 JA |
389 | .BI sync_file_range \fR=\fPstr:int |
390 | Use sync_file_range() for every \fRval\fP number of write operations. Fio will | |
391 | track range of writes that have happened since the last sync_file_range() call. | |
392 | \fRstr\fP can currently be one or more of: | |
393 | .RS | |
394 | .TP | |
395 | .B wait_before | |
396 | SYNC_FILE_RANGE_WAIT_BEFORE | |
397 | .TP | |
398 | .B write | |
399 | SYNC_FILE_RANGE_WRITE | |
400 | .TP | |
401 | .B wait_after | |
402 | SYNC_FILE_RANGE_WRITE | |
403 | .TP | |
404 | .RE | |
405 | .P | |
406 | So if you do sync_file_range=wait_before,write:8, fio would use | |
407 | \fBSYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE\fP for every 8 writes. | |
408 | Also see the sync_file_range(2) man page. This option is Linux specific. | |
409 | .TP | |
d60e92d1 | 410 | .BI overwrite \fR=\fPbool |
d1429b5c | 411 | If writing, setup the file first and do overwrites. Default: false. |
d60e92d1 AC |
412 | .TP |
413 | .BI end_fsync \fR=\fPbool | |
d1429b5c | 414 | Sync file contents when job exits. Default: false. |
d60e92d1 AC |
415 | .TP |
416 | .BI fsync_on_close \fR=\fPbool | |
417 | If true, sync file contents on close. This differs from \fBend_fsync\fR in that | |
d1429b5c | 418 | it will happen on every close, not just at the end of the job. Default: false. |
d60e92d1 AC |
419 | .TP |
420 | .BI rwmixcycle \fR=\fPint | |
421 | How many milliseconds before switching between reads and writes for a mixed | |
422 | workload. Default: 500ms. | |
423 | .TP | |
424 | .BI rwmixread \fR=\fPint | |
425 | Percentage of a mixed workload that should be reads. Default: 50. | |
426 | .TP | |
427 | .BI rwmixwrite \fR=\fPint | |
d1429b5c | 428 | Percentage of a mixed workload that should be writes. If \fBrwmixread\fR and |
c35dd7a6 JA |
429 | \fBrwmixwrite\fR are given and do not sum to 100%, the latter of the two |
430 | overrides the first. This may interfere with a given rate setting, if fio is | |
431 | asked to limit reads or writes to a certain rate. If that is the case, then | |
432 | the distribution may be skewed. Default: 50. | |
d60e92d1 AC |
433 | .TP |
434 | .B norandommap | |
435 | Normally \fBfio\fR will cover every block of the file when doing random I/O. If | |
436 | this parameter is given, a new offset will be chosen without looking at past | |
437 | I/O history. This parameter is mutually exclusive with \fBverify\fR. | |
438 | .TP | |
3ce9dcaf JA |
439 | .B softrandommap |
440 | See \fBnorandommap\fR. If fio runs with the random block map enabled and it | |
441 | fails to allocate the map, if this option is set it will continue without a | |
442 | random block map. As coverage will not be as complete as with random maps, this | |
443 | option is disabled by default. | |
444 | .TP | |
d60e92d1 AC |
445 | .BI nice \fR=\fPint |
446 | Run job with given nice value. See \fInice\fR\|(2). | |
447 | .TP | |
448 | .BI prio \fR=\fPint | |
449 | Set I/O priority value of this job between 0 (highest) and 7 (lowest). See | |
450 | \fIionice\fR\|(1). | |
451 | .TP | |
452 | .BI prioclass \fR=\fPint | |
453 | Set I/O priority class. See \fIionice\fR\|(1). | |
454 | .TP | |
455 | .BI thinktime \fR=\fPint | |
456 | Stall job for given number of microseconds between issuing I/Os. | |
457 | .TP | |
458 | .BI thinktime_spin \fR=\fPint | |
459 | Pretend to spend CPU time for given number of microseconds, sleeping the rest | |
460 | of the time specified by \fBthinktime\fR. Only valid if \fBthinktime\fR is set. | |
461 | .TP | |
462 | .BI thinktime_blocks \fR=\fPint | |
463 | Number of blocks to issue before waiting \fBthinktime\fR microseconds. | |
464 | Default: 1. | |
465 | .TP | |
466 | .BI rate \fR=\fPint | |
c35dd7a6 JA |
467 | Cap bandwidth used by this job. The number is in bytes/sec, the normal postfix |
468 | rules apply. You can use \fBrate\fR=500k to limit reads and writes to 500k each, | |
469 | or you can specify read and writes separately. Using \fBrate\fR=1m,500k would | |
470 | limit reads to 1MB/sec and writes to 500KB/sec. Capping only reads or writes | |
471 | can be done with \fBrate\fR=,500k or \fBrate\fR=500k,. The former will only | |
472 | limit writes (to 500KB/sec), the latter will only limit reads. | |
d60e92d1 AC |
473 | .TP |
474 | .BI ratemin \fR=\fPint | |
475 | Tell \fBfio\fR to do whatever it can to maintain at least the given bandwidth. | |
c35dd7a6 JA |
476 | Failing to meet this requirement will cause the job to exit. The same format |
477 | as \fBrate\fR is used for read vs write separation. | |
d60e92d1 AC |
478 | .TP |
479 | .BI rate_iops \fR=\fPint | |
c35dd7a6 JA |
480 | Cap the bandwidth to this number of IOPS. Basically the same as rate, just |
481 | specified independently of bandwidth. The same format as \fBrate\fR is used for | |
482 | read vs write seperation. If \fBblocksize\fR is a range, the smallest block | |
483 | size is used as the metric. | |
d60e92d1 AC |
484 | .TP |
485 | .BI rate_iops_min \fR=\fPint | |
c35dd7a6 JA |
486 | If this rate of I/O is not met, the job will exit. The same format as \fBrate\fR |
487 | is used for read vs write seperation. | |
d60e92d1 AC |
488 | .TP |
489 | .BI ratecycle \fR=\fPint | |
490 | Average bandwidth for \fBrate\fR and \fBratemin\fR over this number of | |
491 | milliseconds. Default: 1000ms. | |
492 | .TP | |
493 | .BI cpumask \fR=\fPint | |
494 | Set CPU affinity for this job. \fIint\fR is a bitmask of allowed CPUs the job | |
495 | may run on. See \fBsched_setaffinity\fR\|(2). | |
496 | .TP | |
497 | .BI cpus_allowed \fR=\fPstr | |
498 | Same as \fBcpumask\fR, but allows a comma-delimited list of CPU numbers. | |
499 | .TP | |
500 | .BI startdelay \fR=\fPint | |
501 | Delay start of job for the specified number of seconds. | |
502 | .TP | |
503 | .BI runtime \fR=\fPint | |
504 | Terminate processing after the specified number of seconds. | |
505 | .TP | |
506 | .B time_based | |
507 | If given, run for the specified \fBruntime\fR duration even if the files are | |
508 | completely read or written. The same workload will be repeated as many times | |
509 | as \fBruntime\fR allows. | |
510 | .TP | |
901bb994 JA |
511 | .BI ramp_time \fR=\fPint |
512 | If set, fio will run the specified workload for this amount of time before | |
513 | logging any performance numbers. Useful for letting performance settle before | |
514 | logging results, thus minimizing the runtime required for stable results. Note | |
c35dd7a6 JA |
515 | that the \fBramp_time\fR is considered lead in time for a job, thus it will |
516 | increase the total runtime if a special timeout or runtime is specified. | |
901bb994 | 517 | .TP |
d60e92d1 AC |
518 | .BI invalidate \fR=\fPbool |
519 | Invalidate buffer-cache for the file prior to starting I/O. Default: true. | |
520 | .TP | |
521 | .BI sync \fR=\fPbool | |
522 | Use synchronous I/O for buffered writes. For the majority of I/O engines, | |
d1429b5c | 523 | this means using O_SYNC. Default: false. |
d60e92d1 AC |
524 | .TP |
525 | .BI iomem \fR=\fPstr "\fR,\fP mem" \fR=\fPstr | |
526 | Allocation method for I/O unit buffer. Allowed values are: | |
527 | .RS | |
528 | .RS | |
529 | .TP | |
530 | .B malloc | |
531 | Allocate memory with \fImalloc\fR\|(3). | |
532 | .TP | |
533 | .B shm | |
534 | Use shared memory buffers allocated through \fIshmget\fR\|(2). | |
535 | .TP | |
536 | .B shmhuge | |
537 | Same as \fBshm\fR, but use huge pages as backing. | |
538 | .TP | |
539 | .B mmap | |
540 | Use \fImmap\fR\|(2) for allocation. Uses anonymous memory unless a filename | |
541 | is given after the option in the format `:\fIfile\fR'. | |
542 | .TP | |
543 | .B mmaphuge | |
544 | Same as \fBmmap\fR, but use huge files as backing. | |
545 | .RE | |
546 | .P | |
547 | The amount of memory allocated is the maximum allowed \fBblocksize\fR for the | |
548 | job multiplied by \fBiodepth\fR. For \fBshmhuge\fR or \fBmmaphuge\fR to work, | |
549 | the system must have free huge pages allocated. \fBmmaphuge\fR also needs to | |
2e266ba6 JA |
550 | have hugetlbfs mounted, and \fIfile\fR must point there. At least on Linux, |
551 | huge pages must be manually allocated. See \fB/proc/sys/vm/nr_hugehages\fR | |
552 | and the documentation for that. Normally you just need to echo an appropriate | |
553 | number, eg echoing 8 will ensure that the OS has 8 huge pages ready for | |
554 | use. | |
d60e92d1 AC |
555 | .RE |
556 | .TP | |
d529ee19 JA |
557 | .BI iomem_align \fR=\fPint |
558 | This indiciates the memory alignment of the IO memory buffers. Note that the | |
559 | given alignment is applied to the first IO unit buffer, if using \fBiodepth\fR | |
560 | the alignment of the following buffers are given by the \fBbs\fR used. In | |
561 | other words, if using a \fBbs\fR that is a multiple of the page sized in the | |
562 | system, all buffers will be aligned to this value. If using a \fBbs\fR that | |
563 | is not page aligned, the alignment of subsequent IO memory buffers is the | |
564 | sum of the \fBiomem_align\fR and \fBbs\fR used. | |
565 | .TP | |
f7fa2653 | 566 | .BI hugepage\-size \fR=\fPint |
d60e92d1 | 567 | Defines the size of a huge page. Must be at least equal to the system setting. |
b22989b9 | 568 | Should be a multiple of 1MB. Default: 4MB. |
d60e92d1 AC |
569 | .TP |
570 | .B exitall | |
571 | Terminate all jobs when one finishes. Default: wait for each job to finish. | |
572 | .TP | |
573 | .BI bwavgtime \fR=\fPint | |
574 | Average bandwidth calculations over the given time in milliseconds. Default: | |
575 | 500ms. | |
576 | .TP | |
577 | .BI create_serialize \fR=\fPbool | |
d1429b5c | 578 | If true, serialize file creation for the jobs. Default: true. |
d60e92d1 AC |
579 | .TP |
580 | .BI create_fsync \fR=\fPbool | |
581 | \fIfsync\fR\|(2) data file after creation. Default: true. | |
582 | .TP | |
6b7f6851 JA |
583 | .BI create_on_open \fR=\fPbool |
584 | If true, the files are not created until they are opened for IO by the job. | |
585 | .TP | |
e9f48479 JA |
586 | .BI pre_read \fR=\fPbool |
587 | If this is given, files will be pre-read into memory before starting the given | |
588 | IO operation. This will also clear the \fR \fBinvalidate\fR flag, since it is | |
9c0d2241 JA |
589 | pointless to pre-read and then drop the cache. This will only work for IO |
590 | engines that are seekable, since they allow you to read the same data | |
591 | multiple times. Thus it will not work on eg network or splice IO. | |
e9f48479 | 592 | .TP |
d60e92d1 AC |
593 | .BI unlink \fR=\fPbool |
594 | Unlink job files when done. Default: false. | |
595 | .TP | |
596 | .BI loops \fR=\fPint | |
597 | Specifies the number of iterations (runs of the same workload) of this job. | |
598 | Default: 1. | |
599 | .TP | |
600 | .BI do_verify \fR=\fPbool | |
601 | Run the verify phase after a write phase. Only valid if \fBverify\fR is set. | |
602 | Default: true. | |
603 | .TP | |
604 | .BI verify \fR=\fPstr | |
605 | Method of verifying file contents after each iteration of the job. Allowed | |
606 | values are: | |
607 | .RS | |
608 | .RS | |
609 | .TP | |
b892dc08 | 610 | .B md5 crc16 crc32 crc32c crc32c-intel crc64 crc7 sha256 sha512 sha1 |
0539d758 JA |
611 | Store appropriate checksum in the header of each block. crc32c-intel is |
612 | hardware accelerated SSE4.2 driven, falls back to regular crc32c if | |
613 | not supported by the system. | |
d60e92d1 AC |
614 | .TP |
615 | .B meta | |
616 | Write extra information about each I/O (timestamp, block number, etc.). The | |
996093bb | 617 | block number is verified. See \fBverify_pattern\fR as well. |
d60e92d1 AC |
618 | .TP |
619 | .B null | |
620 | Pretend to verify. Used for testing internals. | |
621 | .RE | |
b892dc08 JA |
622 | |
623 | This option can be used for repeated burn-in tests of a system to make sure | |
624 | that the written data is also correctly read back. If the data direction given | |
625 | is a read or random read, fio will assume that it should verify a previously | |
626 | written file. If the data direction includes any form of write, the verify will | |
627 | be of the newly written data. | |
d60e92d1 AC |
628 | .RE |
629 | .TP | |
630 | .BI verify_sort \fR=\fPbool | |
631 | If true, written verify blocks are sorted if \fBfio\fR deems it to be faster to | |
632 | read them back in a sorted manner. Default: true. | |
633 | .TP | |
f7fa2653 | 634 | .BI verify_offset \fR=\fPint |
d60e92d1 | 635 | Swap the verification header with data somewhere else in the block before |
d1429b5c | 636 | writing. It is swapped back before verifying. |
d60e92d1 | 637 | .TP |
f7fa2653 | 638 | .BI verify_interval \fR=\fPint |
d60e92d1 AC |
639 | Write the verification header for this number of bytes, which should divide |
640 | \fBblocksize\fR. Default: \fBblocksize\fR. | |
641 | .TP | |
996093bb JA |
642 | .BI verify_pattern \fR=\fPstr |
643 | If set, fio will fill the io buffers with this pattern. Fio defaults to filling | |
644 | with totally random bytes, but sometimes it's interesting to fill with a known | |
645 | pattern for io verification purposes. Depending on the width of the pattern, | |
646 | fio will fill 1/2/3/4 bytes of the buffer at the time(it can be either a | |
647 | decimal or a hex number). The verify_pattern if larger than a 32-bit quantity | |
648 | has to be a hex number that starts with either "0x" or "0X". Use with | |
649 | \fBverify\fP=meta. | |
650 | .TP | |
d60e92d1 AC |
651 | .BI verify_fatal \fR=\fPbool |
652 | If true, exit the job on the first observed verification failure. Default: | |
653 | false. | |
654 | .TP | |
e8462bd8 JA |
655 | .BI verify_async \fR=\fPint |
656 | Fio will normally verify IO inline from the submitting thread. This option | |
657 | takes an integer describing how many async offload threads to create for IO | |
658 | verification instead, causing fio to offload the duty of verifying IO contents | |
c85c324c JA |
659 | to one or more separate threads. If using this offload option, even sync IO |
660 | engines can benefit from using an \fBiodepth\fR setting higher than 1, as it | |
661 | allows them to have IO in flight while verifies are running. | |
e8462bd8 JA |
662 | .TP |
663 | .BI verify_async_cpus \fR=\fPstr | |
664 | Tell fio to set the given CPU affinity on the async IO verification threads. | |
665 | See \fBcpus_allowed\fP for the format used. | |
666 | .TP | |
6f87418f JA |
667 | .BI verify_backlog \fR=\fPint |
668 | Fio will normally verify the written contents of a job that utilizes verify | |
669 | once that job has completed. In other words, everything is written then | |
670 | everything is read back and verified. You may want to verify continually | |
671 | instead for a variety of reasons. Fio stores the meta data associated with an | |
672 | IO block in memory, so for large verify workloads, quite a bit of memory would | |
673 | be used up holding this meta data. If this option is enabled, fio will verify | |
674 | the previously written blocks before continuing to write new ones. | |
675 | .TP | |
676 | .BI verify_backlog_batch \fR=\fPint | |
677 | Control how many blocks fio will verify if verify_backlog is set. If not set, | |
678 | will default to the value of \fBverify_backlog\fR (meaning the entire queue is | |
679 | read back and verified). | |
680 | .TP | |
d60e92d1 | 681 | .B stonewall |
d1429b5c | 682 | Wait for preceeding jobs in the job file to exit before starting this one. |
d60e92d1 AC |
683 | \fBstonewall\fR implies \fBnew_group\fR. |
684 | .TP | |
685 | .B new_group | |
686 | Start a new reporting group. If not given, all jobs in a file will be part | |
687 | of the same reporting group, unless separated by a stonewall. | |
688 | .TP | |
689 | .BI numjobs \fR=\fPint | |
690 | Number of clones (processes/threads performing the same workload) of this job. | |
691 | Default: 1. | |
692 | .TP | |
693 | .B group_reporting | |
694 | If set, display per-group reports instead of per-job when \fBnumjobs\fR is | |
695 | specified. | |
696 | .TP | |
697 | .B thread | |
698 | Use threads created with \fBpthread_create\fR\|(3) instead of processes created | |
699 | with \fBfork\fR\|(2). | |
700 | .TP | |
f7fa2653 | 701 | .BI zonesize \fR=\fPint |
d60e92d1 AC |
702 | Divide file into zones of the specified size in bytes. See \fBzoneskip\fR. |
703 | .TP | |
f7fa2653 | 704 | .BI zoneskip \fR=\fPint |
d1429b5c | 705 | Skip the specified number of bytes when \fBzonesize\fR bytes of data have been |
d60e92d1 AC |
706 | read. |
707 | .TP | |
708 | .BI write_iolog \fR=\fPstr | |
709 | Write the issued I/O patterns to the specified file. | |
710 | .TP | |
711 | .BI read_iolog \fR=\fPstr | |
712 | Replay the I/O patterns contained in the specified file generated by | |
713 | \fBwrite_iolog\fR, or may be a \fBblktrace\fR binary file. | |
714 | .TP | |
901bb994 JA |
715 | .B write_bw_log \fR=\fPstr |
716 | If given, write a bandwidth log of the jobs in this job file. Can be used to | |
717 | store data of the bandwidth of the jobs in their lifetime. The included | |
718 | fio_generate_plots script uses gnuplot to turn these text files into nice | |
719 | graphs. See \fBwrite_log_log\fR for behaviour of given filename. For this | |
720 | option, the postfix is _bw.log. | |
d60e92d1 AC |
721 | .TP |
722 | .B write_lat_log | |
901bb994 JA |
723 | Same as \fBwrite_bw_log\fR, but writes I/O completion latencies. If no |
724 | filename is given with this option, the default filename of "jobname_type.log" | |
725 | is used. Even if the filename is given, fio will still append the type of log. | |
726 | .TP | |
02af0988 JA |
727 | .B disable_lat \fR=\fPbool |
728 | Disable measurements of total latency numbers. Useful only for cutting | |
901bb994 JA |
729 | back the number of calls to gettimeofday, as that does impact performance at |
730 | really high IOPS rates. Note that to really get rid of a large amount of these | |
731 | calls, this option must be used with disable_slat and disable_bw as well. | |
732 | .TP | |
02af0988 JA |
733 | .B disable_clat \fR=\fPbool |
734 | Disable measurements of submission latency numbers. See \fBdisable_lat\fR. | |
735 | .TP | |
901bb994 | 736 | .B disable_slat \fR=\fPbool |
02af0988 | 737 | Disable measurements of submission latency numbers. See \fBdisable_lat\fR. |
901bb994 JA |
738 | .TP |
739 | .B disable_bw_measurement \fR=\fPbool | |
02af0988 | 740 | Disable measurements of throughput/bandwidth numbers. See \fBdisable_lat\fR. |
d60e92d1 | 741 | .TP |
f7fa2653 | 742 | .BI lockmem \fR=\fPint |
d60e92d1 AC |
743 | Pin the specified amount of memory with \fBmlock\fR\|(2). Can be used to |
744 | simulate a smaller amount of memory. | |
745 | .TP | |
746 | .BI exec_prerun \fR=\fPstr | |
747 | Before running the job, execute the specified command with \fBsystem\fR\|(3). | |
748 | .TP | |
749 | .BI exec_postrun \fR=\fPstr | |
750 | Same as \fBexec_prerun\fR, but the command is executed after the job completes. | |
751 | .TP | |
752 | .BI ioscheduler \fR=\fPstr | |
753 | Attempt to switch the device hosting the file to the specified I/O scheduler. | |
754 | .TP | |
755 | .BI cpuload \fR=\fPint | |
756 | If the job is a CPU cycle-eater, attempt to use the specified percentage of | |
757 | CPU cycles. | |
758 | .TP | |
759 | .BI cpuchunks \fR=\fPint | |
760 | If the job is a CPU cycle-eater, split the load into cycles of the | |
761 | given time in milliseconds. | |
762 | .TP | |
763 | .BI disk_util \fR=\fPbool | |
d1429b5c | 764 | Generate disk utilization statistics if the platform supports it. Default: true. |
901bb994 JA |
765 | .TP |
766 | .BI gtod_reduce \fR=\fPbool | |
767 | Enable all of the gettimeofday() reducing options (disable_clat, disable_slat, | |
768 | disable_bw) plus reduce precision of the timeout somewhat to really shrink the | |
769 | gettimeofday() call count. With this option enabled, we only do about 0.4% of | |
770 | the gtod() calls we would have done if all time keeping was enabled. | |
771 | .TP | |
772 | .BI gtod_cpu \fR=\fPint | |
773 | Sometimes it's cheaper to dedicate a single thread of execution to just getting | |
774 | the current time. Fio (and databases, for instance) are very intensive on | |
775 | gettimeofday() calls. With this option, you can set one CPU aside for doing | |
776 | nothing but logging current time to a shared memory location. Then the other | |
777 | threads/processes that run IO workloads need only copy that segment, instead of | |
778 | entering the kernel with a gettimeofday() call. The CPU set aside for doing | |
779 | these time calls will be excluded from other uses. Fio will manually clear it | |
780 | from the CPU mask of other jobs. | |
f2bba182 | 781 | .TP |
a696fa2a JA |
782 | .BI cgroup \fR=\fPstr |
783 | Add job to this control group. If it doesn't exist, it will be created. | |
6adb38a1 JA |
784 | The system must have a mounted cgroup blkio mount point for this to work. If |
785 | your system doesn't have it mounted, you can do so with: | |
786 | ||
787 | # mount -t cgroup -o blkio none /cgroup | |
a696fa2a JA |
788 | .TP |
789 | .BI cgroup_weight \fR=\fPint | |
790 | Set the weight of the cgroup to this value. See the documentation that comes | |
791 | with the kernel, allowed values are in the range of 100..1000. | |
e0b0d892 | 792 | .TP |
7de87099 VG |
793 | .BI cgroup_nodelete \fR=\fPbool |
794 | Normally fio will delete the cgroups it has created after the job completion. | |
795 | To override this behavior and to leave cgroups around after the job completion, | |
796 | set cgroup_nodelete=1. This can be useful if one wants to inspect various | |
797 | cgroup files after job completion. Default: false | |
798 | .TP | |
e0b0d892 JA |
799 | .BI uid \fR=\fPint |
800 | Instead of running as the invoking user, set the user ID to this value before | |
801 | the thread/process does any work. | |
802 | .TP | |
803 | .BI gid \fR=\fPint | |
804 | Set group ID, see \fBuid\fR. | |
d60e92d1 | 805 | .SH OUTPUT |
d1429b5c AC |
806 | While running, \fBfio\fR will display the status of the created jobs. For |
807 | example: | |
d60e92d1 | 808 | .RS |
d1429b5c | 809 | .P |
d60e92d1 AC |
810 | Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s] |
811 | .RE | |
812 | .P | |
d1429b5c AC |
813 | The characters in the first set of brackets denote the current status of each |
814 | threads. The possible values are: | |
815 | .P | |
816 | .PD 0 | |
d60e92d1 AC |
817 | .RS |
818 | .TP | |
819 | .B P | |
820 | Setup but not started. | |
821 | .TP | |
822 | .B C | |
823 | Thread created. | |
824 | .TP | |
825 | .B I | |
826 | Initialized, waiting. | |
827 | .TP | |
828 | .B R | |
829 | Running, doing sequential reads. | |
830 | .TP | |
831 | .B r | |
832 | Running, doing random reads. | |
833 | .TP | |
834 | .B W | |
835 | Running, doing sequential writes. | |
836 | .TP | |
837 | .B w | |
838 | Running, doing random writes. | |
839 | .TP | |
840 | .B M | |
841 | Running, doing mixed sequential reads/writes. | |
842 | .TP | |
843 | .B m | |
844 | Running, doing mixed random reads/writes. | |
845 | .TP | |
846 | .B F | |
847 | Running, currently waiting for \fBfsync\fR\|(2). | |
848 | .TP | |
849 | .B V | |
850 | Running, verifying written data. | |
851 | .TP | |
852 | .B E | |
853 | Exited, not reaped by main thread. | |
854 | .TP | |
855 | .B \- | |
856 | Exited, thread reaped. | |
857 | .RE | |
d1429b5c | 858 | .PD |
d60e92d1 AC |
859 | .P |
860 | The second set of brackets shows the estimated completion percentage of | |
861 | the current group. The third set shows the read and write I/O rate, | |
862 | respectively. Finally, the estimated run time of the job is displayed. | |
863 | .P | |
864 | When \fBfio\fR completes (or is interrupted by Ctrl-C), it will show data | |
865 | for each thread, each group of threads, and each disk, in that order. | |
866 | .P | |
867 | Per-thread statistics first show the threads client number, group-id, and | |
868 | error code. The remaining figures are as follows: | |
869 | .RS | |
d60e92d1 AC |
870 | .TP |
871 | .B io | |
872 | Number of megabytes of I/O performed. | |
873 | .TP | |
874 | .B bw | |
875 | Average data rate (bandwidth). | |
876 | .TP | |
877 | .B runt | |
878 | Threads run time. | |
879 | .TP | |
880 | .B slat | |
881 | Submission latency minimum, maximum, average and standard deviation. This is | |
882 | the time it took to submit the I/O. | |
883 | .TP | |
884 | .B clat | |
885 | Completion latency minimum, maximum, average and standard deviation. This | |
886 | is the time between submission and completion. | |
887 | .TP | |
888 | .B bw | |
889 | Bandwidth minimum, maximum, percentage of aggregate bandwidth received, average | |
890 | and standard deviation. | |
891 | .TP | |
892 | .B cpu | |
893 | CPU usage statistics. Includes user and system time, number of context switches | |
894 | this thread went through and number of major and minor page faults. | |
895 | .TP | |
896 | .B IO depths | |
897 | Distribution of I/O depths. Each depth includes everything less than (or equal) | |
898 | to it, but greater than the previous depth. | |
899 | .TP | |
900 | .B IO issued | |
901 | Number of read/write requests issued, and number of short read/write requests. | |
902 | .TP | |
903 | .B IO latencies | |
904 | Distribution of I/O completion latencies. The numbers follow the same pattern | |
905 | as \fBIO depths\fR. | |
906 | .RE | |
d60e92d1 AC |
907 | .P |
908 | The group statistics show: | |
d1429b5c | 909 | .PD 0 |
d60e92d1 AC |
910 | .RS |
911 | .TP | |
912 | .B io | |
913 | Number of megabytes I/O performed. | |
914 | .TP | |
915 | .B aggrb | |
916 | Aggregate bandwidth of threads in the group. | |
917 | .TP | |
918 | .B minb | |
919 | Minimum average bandwidth a thread saw. | |
920 | .TP | |
921 | .B maxb | |
922 | Maximum average bandwidth a thread saw. | |
923 | .TP | |
924 | .B mint | |
d1429b5c | 925 | Shortest runtime of threads in the group. |
d60e92d1 AC |
926 | .TP |
927 | .B maxt | |
928 | Longest runtime of threads in the group. | |
929 | .RE | |
d1429b5c | 930 | .PD |
d60e92d1 AC |
931 | .P |
932 | Finally, disk statistics are printed with reads first: | |
d1429b5c | 933 | .PD 0 |
d60e92d1 AC |
934 | .RS |
935 | .TP | |
936 | .B ios | |
937 | Number of I/Os performed by all groups. | |
938 | .TP | |
939 | .B merge | |
940 | Number of merges in the I/O scheduler. | |
941 | .TP | |
942 | .B ticks | |
943 | Number of ticks we kept the disk busy. | |
944 | .TP | |
945 | .B io_queue | |
946 | Total time spent in the disk queue. | |
947 | .TP | |
948 | .B util | |
949 | Disk utilization. | |
950 | .RE | |
d1429b5c | 951 | .PD |
d60e92d1 AC |
952 | .SH TERSE OUTPUT |
953 | If the \fB\-\-minimal\fR option is given, the results will be printed in a | |
954 | semicolon-delimited format suitable for scripted use. The fields are: | |
955 | .P | |
956 | .RS | |
957 | .B jobname, groupid, error | |
958 | .P | |
959 | Read status: | |
960 | .RS | |
b22989b9 | 961 | .B KB I/O, bandwidth \fR(KB/s)\fP, runtime \fR(ms)\fP |
d60e92d1 AC |
962 | .P |
963 | Submission latency: | |
964 | .RS | |
965 | .B min, max, mean, standard deviation | |
966 | .RE | |
967 | Completion latency: | |
968 | .RS | |
969 | .B min, max, mean, standard deviation | |
970 | .RE | |
971 | Bandwidth: | |
972 | .RS | |
973 | .B min, max, aggregate percentage of total, mean, standard deviation | |
974 | .RE | |
975 | .RE | |
976 | .P | |
977 | Write status: | |
978 | .RS | |
b22989b9 | 979 | .B KB I/O, bandwidth \fR(KB/s)\fP, runtime \fR(ms)\fP |
d60e92d1 AC |
980 | .P |
981 | Submission latency: | |
982 | .RS | |
983 | .B min, max, mean, standard deviation | |
984 | .RE | |
985 | Completion latency: | |
986 | .RS | |
987 | .B min, max, mean, standard deviation | |
988 | .RE | |
989 | Bandwidth: | |
990 | .RS | |
991 | .B min, max, aggregate percentage of total, mean, standard deviation | |
992 | .RE | |
993 | .RE | |
994 | .P | |
d1429b5c | 995 | CPU usage: |
d60e92d1 | 996 | .RS |
bd2626f0 | 997 | .B user, system, context switches, major page faults, minor page faults |
d60e92d1 AC |
998 | .RE |
999 | .P | |
1000 | IO depth distribution: | |
1001 | .RS | |
1002 | .B <=1, 2, 4, 8, 16, 32, >=64 | |
1003 | .RE | |
1004 | .P | |
1005 | IO latency distribution (ms): | |
1006 | .RS | |
1007 | .B <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, >=2000 | |
1008 | .RE | |
1009 | .P | |
1010 | .B text description | |
1011 | .RE | |
1012 | .SH AUTHORS | |
1013 | .B fio | |
aa58d252 JA |
1014 | was written by Jens Axboe <jens.axboe@oracle.com>, |
1015 | now Jens Axboe <jaxboe@fusionio.com>. | |
d1429b5c AC |
1016 | .br |
1017 | This man page was written by Aaron Carroll <aaronc@cse.unsw.edu.au> based | |
d60e92d1 AC |
1018 | on documentation by Jens Axboe. |
1019 | .SH "REPORTING BUGS" | |
482900c9 | 1020 | Report bugs to the \fBfio\fR mailing list <fio@vger.kernel.org>. |
d1429b5c | 1021 | See \fBREADME\fR. |
d60e92d1 | 1022 | .SH "SEE ALSO" |
d1429b5c AC |
1023 | For further documentation see \fBHOWTO\fR and \fBREADME\fR. |
1024 | .br | |
1025 | Sample jobfiles are available in the \fBexamples\fR directory. | |
d60e92d1 | 1026 |