Commit | Line | Data |
---|---|---|
71bfa161 JA |
1 | Table of contents |
2 | ----------------- | |
3 | ||
4 | 1. Overview | |
5 | 2. How fio works | |
6 | 3. Running fio | |
7 | 4. Job file format | |
8 | 5. Detailed list of parameters | |
9 | 6. Normal output | |
10 | 7. Terse output | |
25c8b9d7 | 11 | 8. Trace file format |
43f09da1 | 12 | 9. CPU idleness profiling |
71bfa161 JA |
13 | |
14 | 1.0 Overview and history | |
15 | ------------------------ | |
16 | fio was originally written to save me the hassle of writing special test | |
17 | case programs when I wanted to test a specific workload, either for | |
18 | performance reasons or to find/reproduce a bug. The process of writing | |
19 | such a test app can be tiresome, especially if you have to do it often. | |
20 | Hence I needed a tool that would be able to simulate a given io workload | |
21 | without resorting to writing a tailored test case again and again. | |
22 | ||
23 | A test work load is difficult to define, though. There can be any number | |
24 | of processes or threads involved, and they can each be using their own | |
25 | way of generating io. You could have someone dirtying large amounts of | |
26 | memory in an memory mapped file, or maybe several threads issuing | |
27 | reads using asynchronous io. fio needed to be flexible enough to | |
28 | simulate both of these cases, and many more. | |
29 | ||
30 | 2.0 How fio works | |
31 | ----------------- | |
32 | The first step in getting fio to simulate a desired io workload, is | |
33 | writing a job file describing that specific setup. A job file may contain | |
34 | any number of threads and/or files - the typical contents of the job file | |
35 | is a global section defining shared parameters, and one or more job | |
36 | sections describing the jobs involved. When run, fio parses this file | |
37 | and sets everything up as described. If we break down a job from top to | |
38 | bottom, it contains the following basic parameters: | |
39 | ||
40 | IO type Defines the io pattern issued to the file(s). | |
41 | We may only be reading sequentially from this | |
42 | file(s), or we may be writing randomly. Or even | |
43 | mixing reads and writes, sequentially or randomly. | |
44 | ||
45 | Block size In how large chunks are we issuing io? This may be | |
46 | a single value, or it may describe a range of | |
47 | block sizes. | |
48 | ||
49 | IO size How much data are we going to be reading/writing. | |
50 | ||
51 | IO engine How do we issue io? We could be memory mapping the | |
52 | file, we could be using regular read/write, we | |
d0ff85df | 53 | could be using splice, async io, syslet, or even |
71bfa161 JA |
54 | SG (SCSI generic sg). |
55 | ||
6c219763 | 56 | IO depth If the io engine is async, how large a queuing |
71bfa161 JA |
57 | depth do we want to maintain? |
58 | ||
59 | IO type Should we be doing buffered io, or direct/raw io? | |
60 | ||
61 | Num files How many files are we spreading the workload over. | |
62 | ||
63 | Num threads How many threads or processes should we spread | |
64 | this workload over. | |
66c098b8 | 65 | |
71bfa161 JA |
66 | The above are the basic parameters defined for a workload, in addition |
67 | there's a multitude of parameters that modify other aspects of how this | |
68 | job behaves. | |
69 | ||
70 | ||
71 | 3.0 Running fio | |
72 | --------------- | |
73 | See the README file for command line parameters, there are only a few | |
74 | of them. | |
75 | ||
76 | Running fio is normally the easiest part - you just give it the job file | |
77 | (or job files) as parameters: | |
78 | ||
79 | $ fio job_file | |
80 | ||
81 | and it will start doing what the job_file tells it to do. You can give | |
82 | more than one job file on the command line, fio will serialize the running | |
83 | of those files. Internally that is the same as using the 'stonewall' | |
550b1db6 | 84 | parameter described in the parameter section. |
71bfa161 | 85 | |
b4692828 JA |
86 | If the job file contains only one job, you may as well just give the |
87 | parameters on the command line. The command line parameters are identical | |
88 | to the job parameters, with a few extra that control global parameters | |
89 | (see README). For example, for the job file parameter iodepth=2, the | |
c2b1e753 JA |
90 | mirror command line option would be --iodepth 2 or --iodepth=2. You can |
91 | also use the command line for giving more than one job entry. For each | |
92 | --name option that fio sees, it will start a new job with that name. | |
93 | Command line entries following a --name entry will apply to that job, | |
94 | until there are no more entries or a new --name entry is seen. This is | |
95 | similar to the job file options, where each option applies to the current | |
96 | job until a new [] job entry is seen. | |
b4692828 | 97 | |
71bfa161 JA |
98 | fio does not need to run as root, except if the files or devices specified |
99 | in the job section requires that. Some other options may also be restricted, | |
6c219763 | 100 | such as memory locking, io scheduler switching, and decreasing the nice value. |
71bfa161 JA |
101 | |
102 | ||
103 | 4.0 Job file format | |
104 | ------------------- | |
105 | As previously described, fio accepts one or more job files describing | |
106 | what it is supposed to do. The job file format is the classic ini file, | |
107 | where the names enclosed in [] brackets define the job name. You are free | |
108 | to use any ascii name you want, except 'global' which has special meaning. | |
109 | A global section sets defaults for the jobs described in that file. A job | |
110 | may override a global section parameter, and a job file may even have | |
111 | several global sections if so desired. A job is only affected by a global | |
65db0851 JA |
112 | section residing above it. If the first character in a line is a ';' or a |
113 | '#', the entire line is discarded as a comment. | |
71bfa161 | 114 | |
3c54bc46 | 115 | So let's look at a really simple job file that defines two processes, each |
b22989b9 | 116 | randomly reading from a 128MB file. |
71bfa161 JA |
117 | |
118 | ; -- start job file -- | |
119 | [global] | |
120 | rw=randread | |
121 | size=128m | |
122 | ||
123 | [job1] | |
124 | ||
125 | [job2] | |
126 | ||
127 | ; -- end job file -- | |
128 | ||
129 | As you can see, the job file sections themselves are empty as all the | |
130 | described parameters are shared. As no filename= option is given, fio | |
c2b1e753 JA |
131 | makes up a filename for each of the jobs as it sees fit. On the command |
132 | line, this job would look as follows: | |
133 | ||
134 | $ fio --name=global --rw=randread --size=128m --name=job1 --name=job2 | |
135 | ||
71bfa161 | 136 | |
3c54bc46 | 137 | Let's look at an example that has a number of processes writing randomly |
71bfa161 JA |
138 | to files. |
139 | ||
140 | ; -- start job file -- | |
141 | [random-writers] | |
142 | ioengine=libaio | |
143 | iodepth=4 | |
144 | rw=randwrite | |
145 | bs=32k | |
146 | direct=0 | |
147 | size=64m | |
148 | numjobs=4 | |
149 | ||
150 | ; -- end job file -- | |
151 | ||
152 | Here we have no global section, as we only have one job defined anyway. | |
153 | We want to use async io here, with a depth of 4 for each file. We also | |
b22989b9 | 154 | increased the buffer size used to 32KB and define numjobs to 4 to |
71bfa161 | 155 | fork 4 identical jobs. The result is 4 processes each randomly writing |
b22989b9 | 156 | to their own 64MB file. Instead of using the above job file, you could |
b4692828 JA |
157 | have given the parameters on the command line. For this case, you would |
158 | specify: | |
159 | ||
160 | $ fio --name=random-writers --ioengine=libaio --iodepth=4 --rw=randwrite --bs=32k --direct=0 --size=64m --numjobs=4 | |
71bfa161 | 161 | |
df5ad464 AK |
162 | When fio is utilized as a basis of any reasonably large test suite, it might be |
163 | desirable to share a set of standardized settings across multiple job files. | |
164 | Instead of copy/pasting such settings, any section may pull in an external | |
165 | .fio file with 'include filename' directive, as in the following example: | |
166 | ||
167 | ; -- start job file including.fio -- | |
168 | [global] | |
169 | filename=/tmp/test | |
170 | filesize=1m | |
171 | include glob-include.fio | |
172 | ||
173 | [test] | |
174 | rw=randread | |
175 | bs=4k | |
176 | time_based=1 | |
177 | runtime=10 | |
178 | include test-include.fio | |
179 | ; -- end job file including.fio -- | |
180 | ||
181 | ; -- start job file glob-include.fio -- | |
182 | thread=1 | |
183 | group_reporting=1 | |
184 | ; -- end job file glob-include.fio -- | |
185 | ||
186 | ; -- start job file test-include.fio -- | |
187 | ioengine=libaio | |
188 | iodepth=4 | |
189 | ; -- end job file test-include.fio -- | |
190 | ||
191 | Settings pulled into a section apply to that section only (except global | |
192 | section). Include directives may be nested in that any included file may | |
193 | contain further include directive(s). | |
194 | ||
195 | ||
74929ac2 JA |
196 | 4.1 Environment variables |
197 | ------------------------- | |
198 | ||
3c54bc46 AC |
199 | fio also supports environment variable expansion in job files. Any |
200 | substring of the form "${VARNAME}" as part of an option value (in other | |
201 | words, on the right of the `='), will be expanded to the value of the | |
202 | environment variable called VARNAME. If no such environment variable | |
203 | is defined, or VARNAME is the empty string, the empty string will be | |
204 | substituted. | |
205 | ||
206 | As an example, let's look at a sample fio invocation and job file: | |
207 | ||
208 | $ SIZE=64m NUMJOBS=4 fio jobfile.fio | |
209 | ||
210 | ; -- start job file -- | |
211 | [random-writers] | |
212 | rw=randwrite | |
213 | size=${SIZE} | |
214 | numjobs=${NUMJOBS} | |
215 | ; -- end job file -- | |
216 | ||
217 | This will expand to the following equivalent job file at runtime: | |
218 | ||
219 | ; -- start job file -- | |
220 | [random-writers] | |
221 | rw=randwrite | |
222 | size=64m | |
223 | numjobs=4 | |
224 | ; -- end job file -- | |
225 | ||
71bfa161 JA |
226 | fio ships with a few example job files, you can also look there for |
227 | inspiration. | |
228 | ||
74929ac2 JA |
229 | 4.2 Reserved keywords |
230 | --------------------- | |
231 | ||
232 | Additionally, fio has a set of reserved keywords that will be replaced | |
233 | internally with the appropriate value. Those keywords are: | |
234 | ||
235 | $pagesize The architecture page size of the running system | |
236 | $mb_memory Megabytes of total memory in the system | |
237 | $ncpus Number of online available CPUs | |
238 | ||
239 | These can be used on the command line or in the job file, and will be | |
240 | automatically substituted with the current system values when the job | |
892a6ffc JA |
241 | is run. Simple math is also supported on these keywords, so you can |
242 | perform actions like: | |
243 | ||
244 | size=8*$mb_memory | |
245 | ||
246 | and get that properly expanded to 8 times the size of memory in the | |
247 | machine. | |
74929ac2 | 248 | |
71bfa161 JA |
249 | |
250 | 5.0 Detailed list of parameters | |
251 | ------------------------------- | |
252 | ||
253 | This section describes in details each parameter associated with a job. | |
254 | Some parameters take an option of a given type, such as an integer or | |
255 | a string. The following types are used: | |
256 | ||
257 | str String. This is a sequence of alpha characters. | |
b09da8fa | 258 | time Integer with possible time suffix. In seconds unless otherwise |
e417fd66 | 259 | specified, use eg 10m for 10 minutes. Accepts s/m/h for seconds, |
0de5b26f JA |
260 | minutes, and hours, and accepts 'ms' (or 'msec') for milliseconds, |
261 | and 'us' (or 'usec') for microseconds. | |
b09da8fa JA |
262 | int SI integer. A whole number value, which may contain a suffix |
263 | describing the base of the number. Accepted suffixes are k/m/g/t/p, | |
264 | meaning kilo, mega, giga, tera, and peta. The suffix is not case | |
57fc29fa JA |
265 | sensitive, and you may also include trailing 'b' (eg 'kb' is the same |
266 | as 'k'). So if you want to specify 4096, you could either write | |
b09da8fa | 267 | out '4096' or just give 4k. The suffixes signify base 2 values, so |
57fc29fa JA |
268 | 1024 is 1k and 1024k is 1m and so on, unless the suffix is explicitly |
269 | set to a base 10 value using 'kib', 'mib', 'gib', etc. If that is the | |
270 | case, then 1000 is used as the multiplier. This can be handy for | |
271 | disks, since manufacturers generally use base 10 values when listing | |
272 | the capacity of a drive. If the option accepts an upper and lower | |
273 | range, use a colon ':' or minus '-' to separate such values. May also | |
274 | include a prefix to indicate numbers base. If 0x is used, the number | |
275 | is assumed to be hexadecimal. See irange. | |
71bfa161 JA |
276 | bool Boolean. Usually parsed as an integer, however only defined for |
277 | true and false (1 and 0). | |
b09da8fa | 278 | irange Integer range with suffix. Allows value range to be given, such |
bf9a3edb | 279 | as 1024-4096. A colon may also be used as the separator, eg |
0c9baf91 JA |
280 | 1k:4k. If the option allows two sets of ranges, they can be |
281 | specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see | |
f7fa2653 | 282 | int. |
83349190 | 283 | float_list A list of floating numbers, separated by a ':' character. |
71bfa161 JA |
284 | |
285 | With the above in mind, here follows the complete list of fio job | |
286 | parameters. | |
287 | ||
288 | name=str ASCII name of the job. This may be used to override the | |
289 | name printed by fio for this job. Otherwise the job | |
c2b1e753 | 290 | name is used. On the command line this parameter has the |
6c219763 | 291 | special purpose of also signaling the start of a new |
c2b1e753 | 292 | job. |
71bfa161 | 293 | |
61697c37 JA |
294 | description=str Text description of the job. Doesn't do anything except |
295 | dump this text description when this job is run. It's | |
296 | not parsed. | |
297 | ||
3776041e | 298 | directory=str Prefix filenames with this directory. Used to place files |
67445b63 JA |
299 | in a different location than "./". See the 'filename' option |
300 | for escaping certain characters. | |
71bfa161 JA |
301 | |
302 | filename=str Fio normally makes up a filename based on the job name, | |
303 | thread number, and file number. If you want to share | |
304 | files between threads in a job or several jobs, specify | |
ed92ac0c | 305 | a filename for each of them to override the default. If |
414c2a3e | 306 | the ioengine used is 'net', the filename is the host, port, |
0fd666bf | 307 | and protocol to use in the format of =host,port,protocol. |
414c2a3e JA |
308 | See ioengine=net for more. If the ioengine is file based, you |
309 | can specify a number of files by separating the names with a | |
310 | ':' colon. So if you wanted a job to open /dev/sda and /dev/sdb | |
311 | as the two working files, you would use | |
30a4588a JA |
312 | filename=/dev/sda:/dev/sdb. On Windows, disk devices are |
313 | accessed as \\.\PhysicalDrive0 for the first device, | |
314 | \\.\PhysicalDrive1 for the second etc. Note: Windows and | |
315 | FreeBSD prevent write access to areas of the disk containing | |
316 | in-use data (e.g. filesystems). | |
317 | If the wanted filename does need to include a colon, then | |
318 | escape that with a '\' character. For instance, if the filename | |
319 | is "/dev/dsk/foo@3,0:c", then you would use | |
320 | filename="/dev/dsk/foo@3,0\:c". '-' is a reserved name, meaning | |
321 | stdin or stdout. Which of the two depends on the read/write | |
322 | direction set. | |
71bfa161 | 323 | |
de98bd30 JA |
324 | filename_format=str |
325 | If sharing multiple files between jobs, it is usually necessary | |
326 | to have fio generate the exact names that you want. By default, | |
327 | fio will name a file based on the default file format | |
328 | specification of jobname.jobnumber.filenumber. With this | |
329 | option, that can be customized. Fio will recognize and replace | |
330 | the following keywords in this string: | |
331 | ||
332 | $jobname | |
333 | The name of the worker thread or process. | |
334 | ||
335 | $jobnum | |
336 | The incremental number of the worker thread or | |
337 | process. | |
338 | ||
339 | $filenum | |
340 | The incremental number of the file for that worker | |
341 | thread or process. | |
342 | ||
343 | To have dependent jobs share a set of files, this option can | |
344 | be set to have fio generate filenames that are shared between | |
345 | the two. For instance, if testfiles.$filenum is specified, | |
346 | file number 4 for any job will be named testfiles.4. The | |
347 | default of $jobname.$jobnum.$filenum will be used if | |
348 | no other format specifier is given. | |
349 | ||
bbf6b540 JA |
350 | opendir=str Tell fio to recursively add any file it can find in this |
351 | directory and down the file system tree. | |
352 | ||
3776041e | 353 | lockfile=str Fio defaults to not locking any files before it does |
4d4e80f2 JA |
354 | IO to them. If a file or file descriptor is shared, fio |
355 | can serialize IO to that file to make the end result | |
356 | consistent. This is usual for emulating real workloads that | |
357 | share files. The lock modes are: | |
358 | ||
359 | none No locking. The default. | |
360 | exclusive Only one thread/process may do IO, | |
361 | excluding all others. | |
362 | readwrite Read-write locking on the file. Many | |
363 | readers may access the file at the | |
364 | same time, but writes get exclusive | |
365 | access. | |
366 | ||
d3aad8f2 | 367 | readwrite=str |
71bfa161 JA |
368 | rw=str Type of io pattern. Accepted values are: |
369 | ||
370 | read Sequential reads | |
371 | write Sequential writes | |
372 | randwrite Random writes | |
373 | randread Random reads | |
10b023db | 374 | rw,readwrite Sequential mixed reads and writes |
71bfa161 JA |
375 | randrw Random mixed reads and writes |
376 | ||
377 | For the mixed io types, the default is to split them 50/50. | |
378 | For certain types of io the result may still be skewed a bit, | |
211097b2 | 379 | since the speed may be different. It is possible to specify |
38dad62d JA |
380 | a number of IO's to do before getting a new offset, this is |
381 | one by appending a ':<nr>' to the end of the string given. | |
382 | For a random read, it would look like 'rw=randread:8' for | |
059b0802 | 383 | passing in an offset modifier with a value of 8. If the |
ddb754db | 384 | suffix is used with a sequential IO pattern, then the value |
059b0802 JA |
385 | specified will be added to the generated offset for each IO. |
386 | For instance, using rw=write:4k will skip 4k for every | |
387 | write. It turns sequential IO into sequential IO with holes. | |
388 | See the 'rw_sequencer' option. | |
38dad62d JA |
389 | |
390 | rw_sequencer=str If an offset modifier is given by appending a number to | |
391 | the rw=<str> line, then this option controls how that | |
392 | number modifies the IO offset being generated. Accepted | |
393 | values are: | |
394 | ||
395 | sequential Generate sequential offset | |
396 | identical Generate the same offset | |
397 | ||
398 | 'sequential' is only useful for random IO, where fio would | |
399 | normally generate a new random offset for every IO. If you | |
400 | append eg 8 to randread, you would get a new random offset for | |
211097b2 JA |
401 | every 8 IO's. The result would be a seek for only every 8 |
402 | IO's, instead of for every IO. Use rw=randread:8 to specify | |
38dad62d JA |
403 | that. As sequential IO is already sequential, setting |
404 | 'sequential' for that would not result in any differences. | |
405 | 'identical' behaves in a similar fashion, except it sends | |
406 | the same offset 8 number of times before generating a new | |
407 | offset. | |
71bfa161 | 408 | |
90fef2d1 JA |
409 | kb_base=int The base unit for a kilobyte. The defacto base is 2^10, 1024. |
410 | Storage manufacturers like to use 10^3 or 1000 as a base | |
411 | ten unit instead, for obvious reasons. Allow values are | |
412 | 1024 or 1000, with 1024 being the default. | |
413 | ||
771e58be JA |
414 | unified_rw_reporting=bool Fio normally reports statistics on a per |
415 | data direction basis, meaning that read, write, and trim are | |
416 | accounted and reported separately. If this option is set, | |
417 | the fio will sum the results and report them as "mixed" | |
418 | instead. | |
419 | ||
ee738499 JA |
420 | randrepeat=bool For random IO workloads, seed the generator in a predictable |
421 | way so that results are repeatable across repetitions. | |
422 | ||
04778baf JA |
423 | randseed=int Seed the random number generators based on this seed value, to |
424 | be able to control what sequence of output is being generated. | |
425 | If not set, the random sequence depends on the randrepeat | |
426 | setting. | |
427 | ||
2615cc4b JA |
428 | use_os_rand=bool Fio can either use the random generator supplied by the OS |
429 | to generator random offsets, or it can use it's own internal | |
430 | generator (based on Tausworthe). Default is to use the | |
431 | internal generator, which is often of better quality and | |
432 | faster. | |
433 | ||
a596f047 EG |
434 | fallocate=str Whether pre-allocation is performed when laying down files. |
435 | Accepted values are: | |
436 | ||
437 | none Do not pre-allocate space | |
438 | posix Pre-allocate via posix_fallocate() | |
439 | keep Pre-allocate via fallocate() with | |
440 | FALLOC_FL_KEEP_SIZE set | |
441 | 0 Backward-compatible alias for 'none' | |
442 | 1 Backward-compatible alias for 'posix' | |
443 | ||
444 | May not be available on all supported platforms. 'keep' is only | |
445 | available on Linux.If using ZFS on Solaris this must be set to | |
446 | 'none' because ZFS doesn't support it. Default: 'posix'. | |
7bc8c2cf | 447 | |
d2f3ac35 JA |
448 | fadvise_hint=bool By default, fio will use fadvise() to advise the kernel |
449 | on what IO patterns it is likely to issue. Sometimes you | |
450 | want to test specific IO patterns without telling the | |
451 | kernel about it, in which case you can disable this option. | |
452 | If set, fio will use POSIX_FADV_SEQUENTIAL for sequential | |
453 | IO and POSIX_FADV_RANDOM for random IO. | |
454 | ||
f7fa2653 | 455 | size=int The total size of file io for this job. Fio will run until |
7616cafe JA |
456 | this many bytes has been transferred, unless runtime is |
457 | limited by other options (such as 'runtime', for instance). | |
3776041e | 458 | Unless specific nrfiles and filesize options are given, |
7616cafe | 459 | fio will divide this size between the available files |
d6667268 | 460 | specified by the job. If not set, fio will use the full |
550b1db6 AG |
461 | size of the given files or devices. If the files do not |
462 | exist, size must be given. It is also possible to give | |
463 | size as a percentage between 1 and 100. If size=20% is | |
464 | given, fio will use 20% of the full size of the given | |
7bb59102 | 465 | files or devices. |
71bfa161 | 466 | |
77731b29 JA |
467 | io_limit=int Normally fio operates within the region set by 'size', which |
468 | means that the 'size' option sets both the region and size of | |
469 | IO to be performed. Sometimes that is not what you want. With | |
470 | this option, it is possible to define just the amount of IO | |
471 | that fio should do. For instance, if 'size' is set to 20G and | |
472 | 'io_limit' is set to 5G, fio will perform IO within the first | |
473 | 20G but exit when 5G have been done. | |
474 | ||
f7fa2653 | 475 | filesize=int Individual file sizes. May be a range, in which case fio |
9c60ce64 JA |
476 | will select sizes for files at random within the given range |
477 | and limited to 'size' in total (if that is given). If not | |
478 | given, each created file is the same size. | |
479 | ||
bedc9dc2 JA |
480 | file_append=bool Perform IO after the end of the file. Normally fio will |
481 | operate within the size of a file. If this option is set, then | |
482 | fio will append to the file instead. This has identical | |
0aae4ce7 JA |
483 | behavior to setting offset to the size of a file. This option |
484 | is ignored on non-regular files. | |
bedc9dc2 | 485 | |
74586c1e JA |
486 | fill_device=bool |
487 | fill_fs=bool Sets size to something really large and waits for ENOSPC (no | |
aa31f1f1 | 488 | space left on device) as the terminating condition. Only makes |
de98bd30 | 489 | sense with sequential write. For a read workload, the mount |
4f12432e JA |
490 | point will be filled first then IO started on the result. This |
491 | option doesn't make sense if operating on a raw device node, | |
492 | since the size of that is already known by the file system. | |
493 | Additionally, writing beyond end-of-device will not return | |
494 | ENOSPC there. | |
aa31f1f1 | 495 | |
f7fa2653 JA |
496 | blocksize=int |
497 | bs=int The block size used for the io units. Defaults to 4k. Values | |
498 | can be given for both read and writes. If a single int is | |
499 | given, it will apply to both. If a second int is specified | |
f90eff5a | 500 | after a comma, it will apply to writes only. In other words, |
d9472271 JA |
501 | the format is either bs=read_and_write or bs=read,write,trim. |
502 | bs=4k,8k will thus use 4k blocks for reads, 8k blocks for | |
503 | writes, and 8k for trims. You can terminate the list with | |
504 | a trailing comma. bs=4k,8k, would use the default value for | |
505 | trims.. If you only wish to set the write size, you | |
787f7e95 JA |
506 | can do so by passing an empty read size - bs=,8k will set |
507 | 8k for writes and leave the read default value. | |
a00735e6 | 508 | |
2b7a01d0 JA |
509 | blockalign=int |
510 | ba=int At what boundary to align random IO offsets. Defaults to | |
511 | the same as 'blocksize' the minimum blocksize given. | |
512 | Minimum alignment is typically 512b for using direct IO, | |
513 | though it usually depends on the hardware block size. This | |
514 | option is mutually exclusive with using a random map for | |
515 | files, so it will turn off that option. | |
516 | ||
d3aad8f2 | 517 | blocksize_range=irange |
71bfa161 JA |
518 | bsrange=irange Instead of giving a single block size, specify a range |
519 | and fio will mix the issued io block sizes. The issued | |
520 | io unit will always be a multiple of the minimum value | |
f90eff5a JA |
521 | given (also see bs_unaligned). Applies to both reads and |
522 | writes, however a second range can be given after a comma. | |
523 | See bs=. | |
a00735e6 | 524 | |
564ca972 JA |
525 | bssplit=str Sometimes you want even finer grained control of the |
526 | block sizes issued, not just an even split between them. | |
527 | This option allows you to weight various block sizes, | |
528 | so that you are able to define a specific amount of | |
529 | block sizes issued. The format for this option is: | |
530 | ||
531 | bssplit=blocksize/percentage:blocksize/percentage | |
532 | ||
533 | for as many block sizes as needed. So if you want to define | |
534 | a workload that has 50% 64k blocks, 10% 4k blocks, and | |
535 | 40% 32k blocks, you would write: | |
536 | ||
537 | bssplit=4k/10:64k/50:32k/40 | |
538 | ||
539 | Ordering does not matter. If the percentage is left blank, | |
540 | fio will fill in the remaining values evenly. So a bssplit | |
541 | option like this one: | |
542 | ||
543 | bssplit=4k/50:1k/:32k/ | |
544 | ||
545 | would have 50% 4k ios, and 25% 1k and 32k ios. The percentages | |
546 | always add up to 100, if bssplit is given a range that adds | |
547 | up to more, it will error out. | |
548 | ||
720e84ad JA |
549 | bssplit also supports giving separate splits to reads and |
550 | writes. The format is identical to what bs= accepts. You | |
551 | have to separate the read and write parts with a comma. So | |
552 | if you want a workload that has 50% 2k reads and 50% 4k reads, | |
553 | while having 90% 4k writes and 10% 8k writes, you would | |
554 | specify: | |
555 | ||
556 | bssplit=2k/50:4k/50,4k/90,8k/10 | |
557 | ||
d3aad8f2 | 558 | blocksize_unaligned |
690adba3 JA |
559 | bs_unaligned If this option is given, any byte size value within bsrange |
560 | may be used as a block range. This typically wont work with | |
561 | direct IO, as that normally requires sector alignment. | |
71bfa161 | 562 | |
6aca9b3d JA |
563 | bs_is_seq_rand If this option is set, fio will use the normal read,write |
564 | blocksize settings as sequential,random instead. Any random | |
565 | read or write will use the WRITE blocksize settings, and any | |
566 | sequential read or write will use the READ blocksize setting. | |
567 | ||
e9459e5a JA |
568 | zero_buffers If this option is given, fio will init the IO buffers to |
569 | all zeroes. The default is to fill them with random data. | |
7750aac4 JA |
570 | The resulting IO buffers will not be completely zeroed, |
571 | unless scramble_buffers is also turned off. | |
e9459e5a | 572 | |
5973cafb JA |
573 | refill_buffers If this option is given, fio will refill the IO buffers |
574 | on every submit. The default is to only fill it at init | |
575 | time and reuse that data. Only makes sense if zero_buffers | |
41ccd845 JA |
576 | isn't specified, naturally. If data verification is enabled, |
577 | refill_buffers is also automatically enabled. | |
5973cafb | 578 | |
fd68418e JA |
579 | scramble_buffers=bool If refill_buffers is too costly and the target is |
580 | using data deduplication, then setting this option will | |
581 | slightly modify the IO buffer contents to defeat normal | |
582 | de-dupe attempts. This is not enough to defeat more clever | |
583 | block compression attempts, but it will stop naive dedupe of | |
584 | blocks. Default: true. | |
585 | ||
c5751c62 JA |
586 | buffer_compress_percentage=int If this is set, then fio will attempt to |
587 | provide IO buffer content (on WRITEs) that compress to | |
588 | the specified level. Fio does this by providing a mix of | |
589 | random data and zeroes. Note that this is per block size | |
590 | unit, for file/disk wide compression level that matches | |
591 | this setting, you'll also want to set refill_buffers. | |
592 | ||
593 | buffer_compress_chunk=int See buffer_compress_percentage. This | |
594 | setting allows fio to manage how big the ranges of random | |
595 | data and zeroed data is. Without this set, fio will | |
596 | provide buffer_compress_percentage of blocksize random | |
597 | data, followed by the remaining zeroed. With this set | |
598 | to some chunk size smaller than the block size, fio can | |
599 | alternate random and zeroed data throughout the IO | |
600 | buffer. | |
601 | ||
5c94b008 JA |
602 | buffer_pattern=str If set, fio will fill the io buffers with this |
603 | pattern. If not set, the contents of io buffers is defined by | |
604 | the other options related to buffer contents. The setting can | |
605 | be any pattern of bytes, and can be prefixed with 0x for hex | |
606 | values. It may also be a string, where the string must then | |
607 | be wrapped with "". | |
608 | ||
609 | dedupe_percentage=int If set, fio will generate this percentage of | |
610 | identical buffers when writing. These buffers will be | |
611 | naturally dedupable. The contents of the buffers depend on | |
612 | what other buffer compression settings have been set. It's | |
613 | possible to have the individual buffers either fully | |
614 | compressible, or not at all. This option only controls the | |
615 | distribution of unique buffers. | |
ce35b1ec | 616 | |
71bfa161 JA |
617 | nrfiles=int Number of files to use for this job. Defaults to 1. |
618 | ||
390b1537 JA |
619 | openfiles=int Number of files to keep open at the same time. Defaults to |
620 | the same as nrfiles, can be set smaller to limit the number | |
621 | simultaneous opens. | |
622 | ||
5af1c6f3 JA |
623 | file_service_type=str Defines how fio decides which file from a job to |
624 | service next. The following types are defined: | |
625 | ||
626 | random Just choose a file at random. | |
627 | ||
628 | roundrobin Round robin over open files. This | |
629 | is the default. | |
630 | ||
a086c257 JA |
631 | sequential Finish one file before moving on to |
632 | the next. Multiple files can still be | |
633 | open depending on 'openfiles'. | |
634 | ||
1907dbc6 JA |
635 | The string can have a number appended, indicating how |
636 | often to switch to a new file. So if option random:4 is | |
637 | given, fio will switch to a new random file after 4 ios | |
638 | have been issued. | |
639 | ||
71bfa161 JA |
640 | ioengine=str Defines how the job issues io to the file. The following |
641 | types are defined: | |
642 | ||
643 | sync Basic read(2) or write(2) io. lseek(2) is | |
644 | used to position the io location. | |
645 | ||
a31041ea | 646 | psync Basic pread(2) or pwrite(2) io. |
647 | ||
e05af9e5 | 648 | vsync Basic readv(2) or writev(2) IO. |
1d2af02a | 649 | |
a46c5e01 JA |
650 | psyncv Basic preadv(2) or pwritev(2) IO. |
651 | ||
15d182aa JA |
652 | libaio Linux native asynchronous io. Note that Linux |
653 | may only support queued behaviour with | |
654 | non-buffered IO (set direct=1 or buffered=0). | |
de890a1e | 655 | This engine defines engine specific options. |
71bfa161 JA |
656 | |
657 | posixaio glibc posix asynchronous io. | |
658 | ||
417f0068 JA |
659 | solarisaio Solaris native asynchronous io. |
660 | ||
03e20d68 BC |
661 | windowsaio Windows native asynchronous io. |
662 | ||
71bfa161 JA |
663 | mmap File is memory mapped and data copied |
664 | to/from using memcpy(3). | |
665 | ||
666 | splice splice(2) is used to transfer the data and | |
667 | vmsplice(2) to transfer data from user | |
668 | space to the kernel. | |
669 | ||
d0ff85df JA |
670 | syslet-rw Use the syslet system calls to make |
671 | regular read/write async. | |
672 | ||
71bfa161 | 673 | sg SCSI generic sg v3 io. May either be |
6c219763 | 674 | synchronous using the SG_IO ioctl, or if |
71bfa161 JA |
675 | the target is an sg character device |
676 | we use read(2) and write(2) for asynchronous | |
677 | io. | |
678 | ||
a94ea28b JA |
679 | null Doesn't transfer any data, just pretends |
680 | to. This is mainly used to exercise fio | |
681 | itself and for debugging/testing purposes. | |
682 | ||
ed92ac0c | 683 | net Transfer over the network to given host:port. |
de890a1e SL |
684 | Depending on the protocol used, the hostname, |
685 | port, listen and filename options are used to | |
686 | specify what sort of connection to make, while | |
687 | the protocol option determines which protocol | |
688 | will be used. | |
689 | This engine defines engine specific options. | |
ed92ac0c | 690 | |
9cce02e8 JA |
691 | netsplice Like net, but uses splice/vmsplice to |
692 | map data and send/receive. | |
de890a1e | 693 | This engine defines engine specific options. |
9cce02e8 | 694 | |
53aec0a4 | 695 | cpuio Doesn't transfer any data, but burns CPU |
ba0fbe10 JA |
696 | cycles according to the cpuload= and |
697 | cpucycle= options. Setting cpuload=85 | |
698 | will cause that job to do nothing but burn | |
36ecec83 GP |
699 | 85% of the CPU. In case of SMP machines, |
700 | use numjobs=<no_of_cpu> to get desired CPU | |
701 | usage, as the cpuload only loads a single | |
702 | CPU at the desired rate. | |
ba0fbe10 | 703 | |
e9a1806f JA |
704 | guasi The GUASI IO engine is the Generic Userspace |
705 | Asyncronous Syscall Interface approach | |
706 | to async IO. See | |
707 | ||
708 | http://www.xmailserver.org/guasi-lib.html | |
709 | ||
710 | for more info on GUASI. | |
711 | ||
21b8aee8 | 712 | rdma The RDMA I/O engine supports both RDMA |
eb52fa3f BVA |
713 | memory semantics (RDMA_WRITE/RDMA_READ) and |
714 | channel semantics (Send/Recv) for the | |
715 | InfiniBand, RoCE and iWARP protocols. | |
21b8aee8 | 716 | |
b861be9f JA |
717 | falloc IO engine that does regular fallocate to |
718 | simulate data transfer as fio ioengine. | |
719 | DDIR_READ does fallocate(,mode = keep_size,) | |
720 | DDIR_WRITE does fallocate(,mode = 0) | |
721 | DDIR_TRIM does fallocate(,mode = punch_hole) | |
d54fce84 DM |
722 | |
723 | e4defrag IO engine that does regular EXT4_IOC_MOVE_EXT | |
b861be9f JA |
724 | ioctls to simulate defragment activity in |
725 | request to DDIR_WRITE event | |
726 | ||
727 | rbd IO engine supporting direct access to Ceph | |
728 | Rados Block Devices (RBD) via librbd without | |
729 | the need to use the kernel rbd driver. This | |
730 | ioengine defines engine specific options. | |
731 | ||
732 | gfapi Using Glusterfs libgfapi sync interface to | |
733 | direct access to Glusterfs volumes without | |
734 | options. | |
735 | ||
736 | gfapi_async Using Glusterfs libgfapi async interface | |
737 | to direct access to Glusterfs volumes without | |
738 | having to go through FUSE. This ioengine | |
739 | defines engine specific options. | |
0981fd71 | 740 | |
b74e419e MM |
741 | libhdfs Read and write through Hadoop (HDFS). |
742 | The 'filename' option is used to specify host, | |
743 | port of the hdfs name-node to connect. This | |
744 | engine interprets offsets a little | |
745 | differently. In HDFS, files once created | |
746 | cannot be modified. So random writes are not | |
747 | possible. To imitate this, libhdfs engine | |
748 | expects bunch of small files to be created | |
749 | over HDFS, and engine will randomly pick a | |
750 | file out of those files based on the offset | |
751 | generated by fio backend. (see the example | |
752 | job file to create such files, use rw=write | |
753 | option). Please note, you might want to set | |
754 | necessary environment variables to work with | |
755 | hdfs/libhdfs properly. | |
1b10477b | 756 | |
8a7bd877 JA |
757 | external Prefix to specify loading an external |
758 | IO engine object file. Append the engine | |
759 | filename, eg ioengine=external:/tmp/foo.o | |
760 | to load ioengine foo.o in /tmp. | |
761 | ||
71bfa161 JA |
762 | iodepth=int This defines how many io units to keep in flight against |
763 | the file. The default is 1 for each file defined in this | |
764 | job, can be overridden with a larger value for higher | |
ee72ca09 JA |
765 | concurrency. Note that increasing iodepth beyond 1 will not |
766 | affect synchronous ioengines (except for small degress when | |
9b836561 | 767 | verify_async is in use). Even async engines may impose OS |
ee72ca09 JA |
768 | restrictions causing the desired depth not to be achieved. |
769 | This may happen on Linux when using libaio and not setting | |
770 | direct=1, since buffered IO is not async on that OS. Keep an | |
771 | eye on the IO depth distribution in the fio output to verify | |
772 | that the achieved depth is as expected. Default: 1. | |
71bfa161 | 773 | |
4950421a | 774 | iodepth_batch_submit=int |
cb5ab512 | 775 | iodepth_batch=int This defines how many pieces of IO to submit at once. |
89e820f6 JA |
776 | It defaults to 1 which means that we submit each IO |
777 | as soon as it is available, but can be raised to submit | |
778 | bigger batches of IO at the time. | |
cb5ab512 | 779 | |
4950421a JA |
780 | iodepth_batch_complete=int This defines how many pieces of IO to retrieve |
781 | at once. It defaults to 1 which means that we'll ask | |
782 | for a minimum of 1 IO in the retrieval process from | |
783 | the kernel. The IO retrieval will go on until we | |
784 | hit the limit set by iodepth_low. If this variable is | |
785 | set to 0, then fio will always check for completed | |
786 | events before queuing more IO. This helps reduce | |
787 | IO latency, at the cost of more retrieval system calls. | |
788 | ||
e916b390 JA |
789 | iodepth_low=int The low water mark indicating when to start filling |
790 | the queue again. Defaults to the same as iodepth, meaning | |
791 | that fio will attempt to keep the queue full at all times. | |
792 | If iodepth is set to eg 16 and iodepth_low is set to 4, then | |
793 | after fio has filled the queue of 16 requests, it will let | |
794 | the depth drain down to 4 before starting to fill it again. | |
795 | ||
71bfa161 | 796 | direct=bool If value is true, use non-buffered io. This is usually |
9b836561 | 797 | O_DIRECT. Note that ZFS on Solaris doesn't support direct io. |
93bcfd20 | 798 | On Windows the synchronous ioengines don't support direct io. |
76a43db4 | 799 | |
d01612f3 CM |
800 | atomic=bool If value is true, attempt to use atomic direct IO. Atomic |
801 | writes are guaranteed to be stable once acknowledged by | |
802 | the operating system. Only Linux supports O_ATOMIC right | |
803 | now. | |
804 | ||
76a43db4 JA |
805 | buffered=bool If value is true, use buffered io. This is the opposite |
806 | of the 'direct' option. Defaults to true. | |
71bfa161 | 807 | |
f7fa2653 | 808 | offset=int Start io at the given offset in the file. The data before |
71bfa161 JA |
809 | the given offset will not be touched. This effectively |
810 | caps the file size at real_size - offset. | |
811 | ||
214ac7e0 | 812 | offset_increment=int If this is provided, then the real offset becomes |
69bdd6ba JH |
813 | offset + offset_increment * thread_number, where the thread |
814 | number is a counter that starts at 0 and is incremented for | |
815 | each sub-job (i.e. when numjobs option is specified). This | |
816 | option is useful if there are several jobs which are intended | |
817 | to operate on a file in parallel disjoint segments, with | |
818 | even spacing between the starting points. | |
214ac7e0 | 819 | |
ddf24e42 JA |
820 | number_ios=int Fio will normally perform IOs until it has exhausted the size |
821 | of the region set by size=, or if it exhaust the allocated | |
822 | time (or hits an error condition). With this setting, the | |
823 | range/size can be set independently of the number of IOs to | |
824 | perform. When fio reaches this number, it will exit normally | |
825 | and report status. | |
826 | ||
71bfa161 JA |
827 | fsync=int If writing to a file, issue a sync of the dirty data |
828 | for every number of blocks given. For example, if you give | |
829 | 32 as a parameter, fio will sync the file for every 32 | |
830 | writes issued. If fio is using non-buffered io, we may | |
831 | not sync the file. The exception is the sg io engine, which | |
6c219763 | 832 | synchronizes the disk cache anyway. |
71bfa161 | 833 | |
e76b1da4 | 834 | fdatasync=int Like fsync= but uses fdatasync() to only sync data and not |
5f9099ea | 835 | metadata blocks. |
93bcfd20 | 836 | In FreeBSD and Windows there is no fdatasync(), this falls back to |
e72fa4d4 | 837 | using fsync() |
5f9099ea | 838 | |
e76b1da4 JA |
839 | sync_file_range=str:val Use sync_file_range() for every 'val' number of |
840 | write operations. Fio will track range of writes that | |
841 | have happened since the last sync_file_range() call. 'str' | |
842 | can currently be one or more of: | |
843 | ||
844 | wait_before SYNC_FILE_RANGE_WAIT_BEFORE | |
845 | write SYNC_FILE_RANGE_WRITE | |
846 | wait_after SYNC_FILE_RANGE_WAIT_AFTER | |
847 | ||
848 | So if you do sync_file_range=wait_before,write:8, fio would | |
849 | use SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE for | |
850 | every 8 writes. Also see the sync_file_range(2) man page. | |
851 | This option is Linux specific. | |
852 | ||
5036fc1e JA |
853 | overwrite=bool If true, writes to a file will always overwrite existing |
854 | data. If the file doesn't already exist, it will be | |
855 | created before the write phase begins. If the file exists | |
856 | and is large enough for the specified write phase, nothing | |
857 | will be done. | |
71bfa161 | 858 | |
dbd11ead | 859 | end_fsync=bool If true, fsync file contents when a write stage has completed. |
71bfa161 | 860 | |
ebb1415f JA |
861 | fsync_on_close=bool If true, fio will fsync() a dirty file on close. |
862 | This differs from end_fsync in that it will happen on every | |
863 | file close, not just at the end of the job. | |
864 | ||
71bfa161 JA |
865 | rwmixread=int How large a percentage of the mix should be reads. |
866 | ||
867 | rwmixwrite=int How large a percentage of the mix should be writes. If both | |
868 | rwmixread and rwmixwrite is given and the values do not add | |
869 | up to 100%, the latter of the two will be used to override | |
c35dd7a6 JA |
870 | the first. This may interfere with a given rate setting, |
871 | if fio is asked to limit reads or writes to a certain rate. | |
872 | If that is the case, then the distribution may be skewed. | |
71bfa161 | 873 | |
92d42d69 JA |
874 | random_distribution=str:float By default, fio will use a completely uniform |
875 | random distribution when asked to perform random IO. Sometimes | |
876 | it is useful to skew the distribution in specific ways, | |
877 | ensuring that some parts of the data is more hot than others. | |
878 | fio includes the following distribution models: | |
879 | ||
880 | random Uniform random distribution | |
881 | zipf Zipf distribution | |
882 | pareto Pareto distribution | |
883 | ||
884 | When using a zipf or pareto distribution, an input value | |
885 | is also needed to define the access pattern. For zipf, this | |
886 | is the zipf theta. For pareto, it's the pareto power. Fio | |
887 | includes a test program, genzipf, that can be used visualize | |
888 | what the given input values will yield in terms of hit rates. | |
889 | If you wanted to use zipf with a theta of 1.2, you would use | |
890 | random_distribution=zipf:1.2 as the option. If a non-uniform | |
891 | model is used, fio will disable use of the random map. | |
892 | ||
211c9b89 JA |
893 | percentage_random=int For a random workload, set how big a percentage should |
894 | be random. This defaults to 100%, in which case the workload | |
895 | is fully random. It can be set from anywhere from 0 to 100. | |
896 | Setting it to 0 would make the workload fully sequential. Any | |
897 | setting in between will result in a random mix of sequential | |
d9472271 JA |
898 | and random IO, at the given percentages. It is possible to |
899 | set different values for reads, writes, and trim. To do so, | |
900 | simply use a comma separated list. See blocksize. | |
211c9b89 | 901 | |
bb8895e0 JA |
902 | norandommap Normally fio will cover every block of the file when doing |
903 | random IO. If this option is given, fio will just get a | |
904 | new random offset without looking at past io history. This | |
905 | means that some blocks may not be read or written, and that | |
906 | some blocks may be read/written more than once. This option | |
8347239a JA |
907 | is mutually exclusive with verify= if and only if multiple |
908 | blocksizes (via bsrange=) are used, since fio only tracks | |
909 | complete rewrites of blocks. | |
bb8895e0 | 910 | |
0408c206 JA |
911 | softrandommap=bool See norandommap. If fio runs with the random block map |
912 | enabled and it fails to allocate the map, if this option is | |
913 | set it will continue without a random block map. As coverage | |
914 | will not be as complete as with random maps, this option is | |
2b386d25 JA |
915 | disabled by default. |
916 | ||
e8b1961d JA |
917 | random_generator=str Fio supports the following engines for generating |
918 | IO offsets for random IO: | |
919 | ||
920 | tausworthe Strong 2^88 cycle random number generator | |
921 | lfsr Linear feedback shift register generator | |
922 | ||
923 | Tausworthe is a strong random number generator, but it | |
924 | requires tracking on the side if we want to ensure that | |
925 | blocks are only read or written once. LFSR guarantees | |
926 | that we never generate the same offset twice, and it's | |
927 | also less computationally expensive. It's not a true | |
928 | random generator, however, though for IO purposes it's | |
929 | typically good enough. LFSR only works with single | |
930 | block sizes, not with workloads that use multiple block | |
931 | sizes. If used with such a workload, fio may read or write | |
932 | some blocks multiple times. | |
43f09da1 | 933 | |
71bfa161 JA |
934 | nice=int Run the job with the given nice value. See man nice(2). |
935 | ||
936 | prio=int Set the io priority value of this job. Linux limits us to | |
937 | a positive value between 0 and 7, with 0 being the highest. | |
938 | See man ionice(1). | |
939 | ||
940 | prioclass=int Set the io priority class. See man ionice(1). | |
941 | ||
942 | thinktime=int Stall the job x microseconds after an io has completed before | |
943 | issuing the next. May be used to simulate processing being | |
48097d5c JA |
944 | done by an application. See thinktime_blocks and |
945 | thinktime_spin. | |
946 | ||
947 | thinktime_spin=int | |
948 | Only valid if thinktime is set - pretend to spend CPU time | |
949 | doing something with the data received, before falling back | |
950 | to sleeping for the rest of the period specified by | |
951 | thinktime. | |
9c1f7434 | 952 | |
4d01ece6 | 953 | thinktime_blocks=int |
9c1f7434 JA |
954 | Only valid if thinktime is set - control how many blocks |
955 | to issue, before waiting 'thinktime' usecs. If not set, | |
956 | defaults to 1 which will make fio wait 'thinktime' usecs | |
4d01ece6 JA |
957 | after every block. This effectively makes any queue depth |
958 | setting redundant, since no more than 1 IO will be queued | |
959 | before we have to complete it and do our thinktime. In | |
960 | other words, this setting effectively caps the queue depth | |
961 | if the latter is larger. | |
71bfa161 | 962 | |
581e7141 | 963 | rate=int Cap the bandwidth used by this job. The number is in bytes/sec, |
b09da8fa | 964 | the normal suffix rules apply. You can use rate=500k to limit |
581e7141 JA |
965 | reads and writes to 500k each, or you can specify read and |
966 | writes separately. Using rate=1m,500k would limit reads to | |
967 | 1MB/sec and writes to 500KB/sec. Capping only reads or | |
968 | writes can be done with rate=,500k or rate=500k,. The former | |
969 | will only limit writes (to 500KB/sec), the latter will only | |
970 | limit reads. | |
71bfa161 JA |
971 | |
972 | ratemin=int Tell fio to do whatever it can to maintain at least this | |
4e991c23 | 973 | bandwidth. Failing to meet this requirement, will cause |
581e7141 JA |
974 | the job to exit. The same format as rate is used for |
975 | read vs write separation. | |
4e991c23 JA |
976 | |
977 | rate_iops=int Cap the bandwidth to this number of IOPS. Basically the same | |
978 | as rate, just specified independently of bandwidth. If the | |
979 | job is given a block size range instead of a fixed value, | |
581e7141 | 980 | the smallest block size is used as the metric. The same format |
de8f6de9 | 981 | as rate is used for read vs write separation. |
4e991c23 JA |
982 | |
983 | rate_iops_min=int If fio doesn't meet this rate of IO, it will cause | |
581e7141 | 984 | the job to exit. The same format as rate is used for read vs |
de8f6de9 | 985 | write separation. |
71bfa161 | 986 | |
3e260a46 JA |
987 | latency_target=int If set, fio will attempt to find the max performance |
988 | point that the given workload will run at while maintaining a | |
989 | latency below this target. The values is given in microseconds. | |
990 | See latency_window and latency_percentile | |
991 | ||
992 | latency_window=int Used with latency_target to specify the sample window | |
993 | that the job is run at varying queue depths to test the | |
994 | performance. The value is given in microseconds. | |
995 | ||
996 | latency_percentile=float The percentage of IOs that must fall within the | |
997 | criteria specified by latency_target and latency_window. If not | |
998 | set, this defaults to 100.0, meaning that all IOs must be equal | |
999 | or below to the value set by latency_target. | |
1000 | ||
15501535 JA |
1001 | max_latency=int If set, fio will exit the job if it exceeds this maximum |
1002 | latency. It will exit with an ETIME error. | |
1003 | ||
71bfa161 | 1004 | ratecycle=int Average bandwidth for 'rate' and 'ratemin' over this number |
6c219763 | 1005 | of milliseconds. |
71bfa161 JA |
1006 | |
1007 | cpumask=int Set the CPU affinity of this job. The parameter given is a | |
a08bc17f JA |
1008 | bitmask of allowed CPU's the job may run on. So if you want |
1009 | the allowed CPUs to be 1 and 5, you would pass the decimal | |
1010 | value of (1 << 1 | 1 << 5), or 34. See man | |
7dbb6eba | 1011 | sched_setaffinity(2). This may not work on all supported |
b0ea08ce JA |
1012 | operating systems or kernel versions. This option doesn't |
1013 | work well for a higher CPU count than what you can store in | |
1014 | an integer mask, so it can only control cpus 1-32. For | |
1015 | boxes with larger CPU counts, use cpus_allowed. | |
71bfa161 | 1016 | |
d2e268b0 JA |
1017 | cpus_allowed=str Controls the same options as cpumask, but it allows a text |
1018 | setting of the permitted CPUs instead. So to use CPUs 1 and | |
62a7273d JA |
1019 | 5, you would specify cpus_allowed=1,5. This options also |
1020 | allows a range of CPUs. Say you wanted a binding to CPUs | |
1021 | 1, 5, and 8-15, you would set cpus_allowed=1,5,8-15. | |
d2e268b0 | 1022 | |
c2acfbac JA |
1023 | cpus_allowed_policy=str Set the policy of how fio distributes the CPUs |
1024 | specified by cpus_allowed or cpumask. Two policies are | |
1025 | supported: | |
1026 | ||
1027 | shared All jobs will share the CPU set specified. | |
1028 | split Each job will get a unique CPU from the CPU set. | |
1029 | ||
1030 | 'shared' is the default behaviour, if the option isn't | |
ada083cd JA |
1031 | specified. If split is specified, then fio will will assign |
1032 | one cpu per job. If not enough CPUs are given for the jobs | |
1033 | listed, then fio will roundrobin the CPUs in the set. | |
c2acfbac | 1034 | |
d0b937ed YR |
1035 | numa_cpu_nodes=str Set this job running on spcified NUMA nodes' CPUs. The |
1036 | arguments allow comma delimited list of cpu numbers, | |
1037 | A-B ranges, or 'all'. Note, to enable numa options support, | |
67bf9823 | 1038 | fio must be built on a system with libnuma-dev(el) installed. |
d0b937ed YR |
1039 | |
1040 | numa_mem_policy=str Set this job's memory policy and corresponding NUMA | |
1041 | nodes. Format of the argements: | |
1042 | <mode>[:<nodelist>] | |
1043 | `mode' is one of the following memory policy: | |
1044 | default, prefer, bind, interleave, local | |
1045 | For `default' and `local' memory policy, no node is | |
1046 | needed to be specified. | |
1047 | For `prefer', only one node is allowed. | |
1048 | For `bind' and `interleave', it allow comma delimited | |
1049 | list of numbers, A-B ranges, or 'all'. | |
1050 | ||
e417fd66 | 1051 | startdelay=time Start this job the specified number of seconds after fio |
71bfa161 JA |
1052 | has started. Only useful if the job file contains several |
1053 | jobs, and you want to delay starting some jobs to a certain | |
1054 | time. | |
1055 | ||
e417fd66 | 1056 | runtime=time Tell fio to terminate processing after the specified number |
71bfa161 JA |
1057 | of seconds. It can be quite hard to determine for how long |
1058 | a specified job will run, so this parameter is handy to | |
1059 | cap the total runtime to a given time. | |
1060 | ||
cf4464ca | 1061 | time_based If set, fio will run for the duration of the runtime |
bf9a3edb | 1062 | specified even if the file(s) are completely read or |
cf4464ca JA |
1063 | written. It will simply loop over the same workload |
1064 | as many times as the runtime allows. | |
1065 | ||
e417fd66 | 1066 | ramp_time=time If set, fio will run the specified workload for this amount |
721938ae JA |
1067 | of time before logging any performance numbers. Useful for |
1068 | letting performance settle before logging results, thus | |
b29ee5b3 JA |
1069 | minimizing the runtime required for stable results. Note |
1070 | that the ramp_time is considered lead in time for a job, | |
1071 | thus it will increase the total runtime if a special timeout | |
1072 | or runtime is specified. | |
721938ae | 1073 | |
71bfa161 JA |
1074 | invalidate=bool Invalidate the buffer/page cache parts for this file prior |
1075 | to starting io. Defaults to true. | |
1076 | ||
1077 | sync=bool Use sync io for buffered writes. For the majority of the | |
1078 | io engines, this means using O_SYNC. | |
1079 | ||
d3aad8f2 | 1080 | iomem=str |
71bfa161 JA |
1081 | mem=str Fio can use various types of memory as the io unit buffer. |
1082 | The allowed values are: | |
1083 | ||
1084 | malloc Use memory from malloc(3) as the buffers. | |
1085 | ||
1086 | shm Use shared memory as the buffers. Allocated | |
1087 | through shmget(2). | |
1088 | ||
74b025b0 JA |
1089 | shmhuge Same as shm, but use huge pages as backing. |
1090 | ||
313cb206 JA |
1091 | mmap Use mmap to allocate buffers. May either be |
1092 | anonymous memory, or can be file backed if | |
1093 | a filename is given after the option. The | |
1094 | format is mem=mmap:/path/to/file. | |
71bfa161 | 1095 | |
d0bdaf49 JA |
1096 | mmaphuge Use a memory mapped huge file as the buffer |
1097 | backing. Append filename after mmaphuge, ala | |
1098 | mem=mmaphuge:/hugetlbfs/file | |
1099 | ||
71bfa161 | 1100 | The area allocated is a function of the maximum allowed |
5394ae5f JA |
1101 | bs size for the job, multiplied by the io depth given. Note |
1102 | that for shmhuge and mmaphuge to work, the system must have | |
1103 | free huge pages allocated. This can normally be checked | |
1104 | and set by reading/writing /proc/sys/vm/nr_hugepages on a | |
b22989b9 | 1105 | Linux system. Fio assumes a huge page is 4MB in size. So |
5394ae5f JA |
1106 | to calculate the number of huge pages you need for a given |
1107 | job file, add up the io depth of all jobs (normally one unless | |
1108 | iodepth= is used) and multiply by the maximum bs set. Then | |
1109 | divide that number by the huge page size. You can see the | |
1110 | size of the huge pages in /proc/meminfo. If no huge pages | |
1111 | are allocated by having a non-zero number in nr_hugepages, | |
56bb17f2 | 1112 | using mmaphuge or shmhuge will fail. Also see hugepage-size. |
5394ae5f JA |
1113 | |
1114 | mmaphuge also needs to have hugetlbfs mounted and the file | |
1115 | location should point there. So if it's mounted in /huge, | |
1116 | you would use mem=mmaphuge:/huge/somefile. | |
71bfa161 | 1117 | |
d529ee19 JA |
1118 | iomem_align=int This indiciates the memory alignment of the IO memory buffers. |
1119 | Note that the given alignment is applied to the first IO unit | |
1120 | buffer, if using iodepth the alignment of the following buffers | |
1121 | are given by the bs used. In other words, if using a bs that is | |
1122 | a multiple of the page sized in the system, all buffers will | |
1123 | be aligned to this value. If using a bs that is not page | |
1124 | aligned, the alignment of subsequent IO memory buffers is the | |
1125 | sum of the iomem_align and bs used. | |
1126 | ||
f7fa2653 | 1127 | hugepage-size=int |
56bb17f2 | 1128 | Defines the size of a huge page. Must at least be equal |
b22989b9 | 1129 | to the system setting, see /proc/meminfo. Defaults to 4MB. |
c51074e7 JA |
1130 | Should probably always be a multiple of megabytes, so using |
1131 | hugepage-size=Xm is the preferred way to set this to avoid | |
1132 | setting a non-pow-2 bad value. | |
56bb17f2 | 1133 | |
71bfa161 JA |
1134 | exitall When one job finishes, terminate the rest. The default is |
1135 | to wait for each job to finish, sometimes that is not the | |
1136 | desired action. | |
1137 | ||
1138 | bwavgtime=int Average the calculated bandwidth over the given time. Value | |
6c219763 | 1139 | is specified in milliseconds. |
71bfa161 | 1140 | |
c8eeb9df JA |
1141 | iopsavgtime=int Average the calculated IOPS over the given time. Value |
1142 | is specified in milliseconds. | |
1143 | ||
71bfa161 JA |
1144 | create_serialize=bool If true, serialize the file creating for the jobs. |
1145 | This may be handy to avoid interleaving of data | |
1146 | files, which may greatly depend on the filesystem | |
1147 | used and even the number of processors in the system. | |
1148 | ||
1149 | create_fsync=bool fsync the data file after creation. This is the | |
1150 | default. | |
1151 | ||
814452bd JA |
1152 | create_on_open=bool Don't pre-setup the files for IO, just create open() |
1153 | when it's time to do IO to that file. | |
1154 | ||
25460cf6 JA |
1155 | create_only=bool If true, fio will only run the setup phase of the job. |
1156 | If files need to be laid out or updated on disk, only | |
1157 | that will be done. The actual job contents are not | |
1158 | executed. | |
1159 | ||
afad68f7 | 1160 | pre_read=bool If this is given, files will be pre-read into memory before |
34f1c044 JA |
1161 | starting the given IO operation. This will also clear |
1162 | the 'invalidate' flag, since it is pointless to pre-read | |
9c0d2241 JA |
1163 | and then drop the cache. This will only work for IO engines |
1164 | that are seekable, since they allow you to read the same data | |
1165 | multiple times. Thus it will not work on eg network or splice | |
1166 | IO. | |
afad68f7 | 1167 | |
e545a6ce | 1168 | unlink=bool Unlink the job files when done. Not the default, as repeated |
bf9a3edb JA |
1169 | runs of that job would then waste time recreating the file |
1170 | set again and again. | |
71bfa161 JA |
1171 | |
1172 | loops=int Run the specified number of iterations of this job. Used | |
1173 | to repeat the same workload a given number of times. Defaults | |
1174 | to 1. | |
1175 | ||
62167762 JC |
1176 | verify_only Do not perform specified workload---only verify data still |
1177 | matches previous invocation of this workload. This option | |
1178 | allows one to check data multiple times at a later date | |
1179 | without overwriting it. This option makes sense only for | |
1180 | workloads that write data, and does not support workloads | |
1181 | with the time_based option set. | |
1182 | ||
68e1f29a | 1183 | do_verify=bool Run the verify phase after a write phase. Only makes sense if |
e84c73a8 SL |
1184 | verify is set. Defaults to 1. |
1185 | ||
71bfa161 JA |
1186 | verify=str If writing to a file, fio can verify the file contents |
1187 | after each iteration of the job. The allowed values are: | |
1188 | ||
1189 | md5 Use an md5 sum of the data area and store | |
1190 | it in the header of each block. | |
1191 | ||
17dc34df JA |
1192 | crc64 Use an experimental crc64 sum of the data |
1193 | area and store it in the header of each | |
1194 | block. | |
1195 | ||
bac39e0e JA |
1196 | crc32c Use a crc32c sum of the data area and store |
1197 | it in the header of each block. | |
1198 | ||
3845591f | 1199 | crc32c-intel Use hardware assisted crc32c calcuation |
0539d758 JA |
1200 | provided on SSE4.2 enabled processors. Falls |
1201 | back to regular software crc32c, if not | |
1202 | supported by the system. | |
3845591f | 1203 | |
71bfa161 JA |
1204 | crc32 Use a crc32 sum of the data area and store |
1205 | it in the header of each block. | |
1206 | ||
969f7ed3 JA |
1207 | crc16 Use a crc16 sum of the data area and store |
1208 | it in the header of each block. | |
1209 | ||
17dc34df JA |
1210 | crc7 Use a crc7 sum of the data area and store |
1211 | it in the header of each block. | |
1212 | ||
844ea602 JA |
1213 | xxhash Use xxhash as the checksum function. Generally |
1214 | the fastest software checksum that fio | |
1215 | supports. | |
1216 | ||
cd14cc10 JA |
1217 | sha512 Use sha512 as the checksum function. |
1218 | ||
1219 | sha256 Use sha256 as the checksum function. | |
1220 | ||
7c353ceb JA |
1221 | sha1 Use optimized sha1 as the checksum function. |
1222 | ||
7437ee87 SL |
1223 | meta Write extra information about each io |
1224 | (timestamp, block number etc.). The block | |
62167762 JC |
1225 | number is verified. The io sequence number is |
1226 | verified for workloads that write data. | |
1227 | See also verify_pattern. | |
7437ee87 | 1228 | |
36690c9b JA |
1229 | null Only pretend to verify. Useful for testing |
1230 | internals with ioengine=null, not for much | |
1231 | else. | |
1232 | ||
6c219763 | 1233 | This option can be used for repeated burn-in tests of a |
71bfa161 | 1234 | system to make sure that the written data is also |
b892dc08 JA |
1235 | correctly read back. If the data direction given is |
1236 | a read or random read, fio will assume that it should | |
1237 | verify a previously written file. If the data direction | |
1238 | includes any form of write, the verify will be of the | |
1239 | newly written data. | |
71bfa161 | 1240 | |
160b966d JA |
1241 | verifysort=bool If set, fio will sort written verify blocks when it deems |
1242 | it faster to read them back in a sorted manner. This is | |
1243 | often the case when overwriting an existing file, since | |
1244 | the blocks are already laid out in the file system. You | |
1245 | can ignore this option unless doing huge amounts of really | |
1246 | fast IO where the red-black tree sorting CPU time becomes | |
1247 | significant. | |
3f9f4e26 | 1248 | |
f7fa2653 | 1249 | verify_offset=int Swap the verification header with data somewhere else |
546a9142 SL |
1250 | in the block before writing. Its swapped back before |
1251 | verifying. | |
1252 | ||
f7fa2653 | 1253 | verify_interval=int Write the verification header at a finer granularity |
3f9f4e26 SL |
1254 | than the blocksize. It will be written for chunks the |
1255 | size of header_interval. blocksize should divide this | |
1256 | evenly. | |
90059d65 | 1257 | |
0e92f873 | 1258 | verify_pattern=str If set, fio will fill the io buffers with this |
e28218f3 SL |
1259 | pattern. Fio defaults to filling with totally random |
1260 | bytes, but sometimes it's interesting to fill with a known | |
1261 | pattern for io verification purposes. Depending on the | |
1262 | width of the pattern, fio will fill 1/2/3/4 bytes of the | |
0e92f873 RR |
1263 | buffer at the time(it can be either a decimal or a hex number). |
1264 | The verify_pattern if larger than a 32-bit quantity has to | |
996093bb JA |
1265 | be a hex number that starts with either "0x" or "0X". Use |
1266 | with verify=meta. | |
e28218f3 | 1267 | |
68e1f29a | 1268 | verify_fatal=bool Normally fio will keep checking the entire contents |
a12a3b4d JA |
1269 | before quitting on a block verification failure. If this |
1270 | option is set, fio will exit the job on the first observed | |
1271 | failure. | |
e8462bd8 | 1272 | |
b463e936 JA |
1273 | verify_dump=bool If set, dump the contents of both the original data |
1274 | block and the data block we read off disk to files. This | |
1275 | allows later analysis to inspect just what kind of data | |
ef71e317 | 1276 | corruption occurred. Off by default. |
b463e936 | 1277 | |
e8462bd8 JA |
1278 | verify_async=int Fio will normally verify IO inline from the submitting |
1279 | thread. This option takes an integer describing how many | |
1280 | async offload threads to create for IO verification instead, | |
1281 | causing fio to offload the duty of verifying IO contents | |
c85c324c JA |
1282 | to one or more separate threads. If using this offload |
1283 | option, even sync IO engines can benefit from using an | |
1284 | iodepth setting higher than 1, as it allows them to have | |
1285 | IO in flight while verifies are running. | |
e8462bd8 JA |
1286 | |
1287 | verify_async_cpus=str Tell fio to set the given CPU affinity on the | |
1288 | async IO verification threads. See cpus_allowed for the | |
1289 | format used. | |
6f87418f JA |
1290 | |
1291 | verify_backlog=int Fio will normally verify the written contents of a | |
1292 | job that utilizes verify once that job has completed. In | |
1293 | other words, everything is written then everything is read | |
1294 | back and verified. You may want to verify continually | |
1295 | instead for a variety of reasons. Fio stores the meta data | |
1296 | associated with an IO block in memory, so for large | |
1297 | verify workloads, quite a bit of memory would be used up | |
1298 | holding this meta data. If this option is enabled, fio | |
f42195a3 JA |
1299 | will write only N blocks before verifying these blocks. |
1300 | ||
6f87418f JA |
1301 | verify_backlog_batch=int Control how many blocks fio will verify |
1302 | if verify_backlog is set. If not set, will default to | |
1303 | the value of verify_backlog (meaning the entire queue | |
f42195a3 JA |
1304 | is read back and verified). If verify_backlog_batch is |
1305 | less than verify_backlog then not all blocks will be verified, | |
1306 | if verify_backlog_batch is larger than verify_backlog, some | |
1307 | blocks will be verified more than once. | |
66c098b8 | 1308 | |
d392365e | 1309 | stonewall |
de8f6de9 | 1310 | wait_for_previous Wait for preceding jobs in the job file to exit, before |
71bfa161 | 1311 | starting this one. Can be used to insert serialization |
b3d62a75 JA |
1312 | points in the job file. A stone wall also implies starting |
1313 | a new reporting group. | |
1314 | ||
abcab6af | 1315 | new_group Start a new reporting group. See: group_reporting. |
71bfa161 JA |
1316 | |
1317 | numjobs=int Create the specified number of clones of this job. May be | |
1318 | used to setup a larger number of threads/processes doing | |
abcab6af AV |
1319 | the same thing. Each thread is reported separately; to see |
1320 | statistics for all clones as a whole, use group_reporting in | |
1321 | conjunction with new_group. | |
1322 | ||
1323 | group_reporting It may sometimes be interesting to display statistics for | |
04b2f799 JA |
1324 | groups of jobs as a whole instead of for each individual job. |
1325 | This is especially true if 'numjobs' is used; looking at | |
1326 | individual thread/process output quickly becomes unwieldy. | |
1327 | To see the final report per-group instead of per-job, use | |
1328 | 'group_reporting'. Jobs in a file will be part of the same | |
1329 | reporting group, unless if separated by a stonewall, or by | |
1330 | using 'new_group'. | |
71bfa161 JA |
1331 | |
1332 | thread fio defaults to forking jobs, however if this option is | |
1333 | given, fio will use pthread_create(3) to create threads | |
1334 | instead. | |
1335 | ||
f7fa2653 | 1336 | zonesize=int Divide a file into zones of the specified size. See zoneskip. |
71bfa161 | 1337 | |
f7fa2653 | 1338 | zoneskip=int Skip the specified number of bytes when zonesize data has |
71bfa161 JA |
1339 | been read. The two zone options can be used to only do |
1340 | io on zones of a file. | |
1341 | ||
076efc7c | 1342 | write_iolog=str Write the issued io patterns to the specified file. See |
5b42a488 SH |
1343 | read_iolog. Specify a separate file for each job, otherwise |
1344 | the iologs will be interspersed and the file may be corrupt. | |
71bfa161 | 1345 | |
076efc7c | 1346 | read_iolog=str Open an iolog with the specified file name and replay the |
71bfa161 | 1347 | io patterns it contains. This can be used to store a |
6df8adaa JA |
1348 | workload and replay it sometime later. The iolog given |
1349 | may also be a blktrace binary file, which allows fio | |
1350 | to replay a workload captured by blktrace. See blktrace | |
1351 | for how to capture such logging data. For blktrace replay, | |
1352 | the file needs to be turned into a blkparse binary data | |
ea3e51c3 | 1353 | file first (blkparse <device> -o /dev/null -d file_for_fio.bin). |
66c098b8 | 1354 | |
64bbb865 | 1355 | replay_no_stall=int When replaying I/O with read_iolog the default behavior |
62776229 JA |
1356 | is to attempt to respect the time stamps within the log and |
1357 | replay them with the appropriate delay between IOPS. By | |
1358 | setting this variable fio will not respect the timestamps and | |
1359 | attempt to replay them as fast as possible while still | |
1360 | respecting ordering. The result is the same I/O pattern to a | |
1361 | given device, but different timings. | |
71bfa161 | 1362 | |
d1c46c04 DN |
1363 | replay_redirect=str While replaying I/O patterns using read_iolog the |
1364 | default behavior is to replay the IOPS onto the major/minor | |
1365 | device that each IOP was recorded from. This is sometimes | |
de8f6de9 | 1366 | undesirable because on a different machine those major/minor |
d1c46c04 DN |
1367 | numbers can map to a different device. Changing hardware on |
1368 | the same system can also result in a different major/minor | |
1369 | mapping. Replay_redirect causes all IOPS to be replayed onto | |
1370 | the single specified device regardless of the device it was | |
1371 | recorded from. i.e. replay_redirect=/dev/sdc would cause all | |
1372 | IO in the blktrace to be replayed onto /dev/sdc. This means | |
1373 | multiple devices will be replayed onto a single, if the trace | |
1374 | contains multiple devices. If you want multiple devices to be | |
1375 | replayed concurrently to multiple redirected devices you must | |
1376 | blkparse your trace into separate traces and replay them with | |
1377 | independent fio invocations. Unfortuantely this also breaks | |
1378 | the strict time ordering between multiple device accesses. | |
1379 | ||
e3cedca7 | 1380 | write_bw_log=str If given, write a bandwidth log of the jobs in this job |
71bfa161 | 1381 | file. Can be used to store data of the bandwidth of the |
e0da9bc2 JA |
1382 | jobs in their lifetime. The included fio_generate_plots |
1383 | script uses gnuplot to turn these text files into nice | |
ddb754db | 1384 | graphs. See write_lat_log for behaviour of given |
8ad3b3dd JA |
1385 | filename. For this option, the suffix is _bw.x.log, where |
1386 | x is the index of the job (1..N, where N is the number of | |
1387 | jobs). | |
71bfa161 | 1388 | |
e3cedca7 | 1389 | write_lat_log=str Same as write_bw_log, except that this option stores io |
02af0988 JA |
1390 | submission, completion, and total latencies instead. If no |
1391 | filename is given with this option, the default filename of | |
1392 | "jobname_type.log" is used. Even if the filename is given, | |
1393 | fio will still append the type of log. So if one specifies | |
e3cedca7 JA |
1394 | |
1395 | write_lat_log=foo | |
1396 | ||
8ad3b3dd JA |
1397 | The actual log names will be foo_slat.x.log, foo_clat.x.log, |
1398 | and foo_lat.x.log, where x is the index of the job (1..N, | |
1399 | where N is the number of jobs). This helps fio_generate_plot | |
1400 | fine the logs automatically. | |
71bfa161 | 1401 | |
b8bc8cba JA |
1402 | write_iops_log=str Same as write_bw_log, but writes IOPS. If no filename is |
1403 | given with this option, the default filename of | |
8ad3b3dd JA |
1404 | "jobname_type.x.log" is used,where x is the index of the job |
1405 | (1..N, where N is the number of jobs). Even if the filename | |
1406 | is given, fio will still append the type of log. | |
b8bc8cba JA |
1407 | |
1408 | log_avg_msec=int By default, fio will log an entry in the iops, latency, | |
1409 | or bw log for every IO that completes. When writing to the | |
1410 | disk log, that can quickly grow to a very large size. Setting | |
1411 | this option makes fio average the each log entry over the | |
1412 | specified period of time, reducing the resolution of the log. | |
1413 | Defaults to 0. | |
1414 | ||
ae588852 JA |
1415 | log_offset=int If this is set, the iolog options will include the byte |
1416 | offset for the IO entry as well as the other data values. | |
1417 | ||
aee2ab67 JA |
1418 | log_compression=int If this is set, fio will compress the IO logs as |
1419 | it goes, to keep the memory footprint lower. When a log | |
1420 | reaches the specified size, that chunk is removed and | |
1421 | compressed in the background. Given that IO logs are | |
1422 | fairly highly compressible, this yields a nice memory | |
1423 | savings for longer runs. The downside is that the | |
1424 | compression will consume some background CPU cycles, so | |
1425 | it may impact the run. This, however, is also true if | |
1426 | the logging ends up consuming most of the system memory. | |
1427 | So pick your poison. The IO logs are saved normally at the | |
1428 | end of a run, by decompressing the chunks and storing them | |
1429 | in the specified log file. This feature depends on the | |
1430 | availability of zlib. | |
1431 | ||
b26317c9 JA |
1432 | log_store_compressed=bool If set, and log_compression is also set, |
1433 | fio will store the log files in a compressed format. They | |
1434 | can be decompressed with fio, using the --inflate-log | |
1435 | command line parameter. The files will be stored with a | |
1436 | .fz suffix. | |
1437 | ||
f7fa2653 | 1438 | lockmem=int Pin down the specified amount of memory with mlock(2). Can |
71bfa161 JA |
1439 | potentially be used instead of removing memory or booting |
1440 | with less memory to simulate a smaller amount of memory. | |
81c6b6cd | 1441 | The amount specified is per worker. |
71bfa161 JA |
1442 | |
1443 | exec_prerun=str Before running this job, issue the command specified | |
74c8c488 JA |
1444 | through system(3). Output is redirected in a file called |
1445 | jobname.prerun.txt. | |
71bfa161 JA |
1446 | |
1447 | exec_postrun=str After the job completes, issue the command specified | |
74c8c488 JA |
1448 | though system(3). Output is redirected in a file called |
1449 | jobname.postrun.txt. | |
71bfa161 JA |
1450 | |
1451 | ioscheduler=str Attempt to switch the device hosting the file to the specified | |
1452 | io scheduler before running. | |
1453 | ||
0a839f30 JA |
1454 | disk_util=bool Generate disk utilization statistics, if the platform |
1455 | supports it. Defaults to on. | |
1456 | ||
02af0988 | 1457 | disable_lat=bool Disable measurements of total latency numbers. Useful |
9520ebb9 JA |
1458 | only for cutting back the number of calls to gettimeofday, |
1459 | as that does impact performance at really high IOPS rates. | |
1460 | Note that to really get rid of a large amount of these | |
1461 | calls, this option must be used with disable_slat and | |
1462 | disable_bw as well. | |
1463 | ||
02af0988 JA |
1464 | disable_clat=bool Disable measurements of completion latency numbers. See |
1465 | disable_lat. | |
1466 | ||
9520ebb9 | 1467 | disable_slat=bool Disable measurements of submission latency numbers. See |
02af0988 | 1468 | disable_slat. |
9520ebb9 JA |
1469 | |
1470 | disable_bw=bool Disable measurements of throughput/bandwidth numbers. See | |
02af0988 | 1471 | disable_lat. |
9520ebb9 | 1472 | |
83349190 YH |
1473 | clat_percentiles=bool Enable the reporting of percentiles of |
1474 | completion latencies. | |
1475 | ||
1476 | percentile_list=float_list Overwrite the default list of percentiles | |
1477 | for completion latencies. Each number is a floating | |
1478 | number in the range (0,100], and the maximum length of | |
1479 | the list is 20. Use ':' to separate the numbers, and | |
1480 | list the numbers in ascending order. For example, | |
1481 | --percentile_list=99.5:99.9 will cause fio to report | |
1482 | the values of completion latency below which 99.5% and | |
1483 | 99.9% of the observed latencies fell, respectively. | |
1484 | ||
23893646 JA |
1485 | clocksource=str Use the given clocksource as the base of timing. The |
1486 | supported options are: | |
1487 | ||
1488 | gettimeofday gettimeofday(2) | |
1489 | ||
1490 | clock_gettime clock_gettime(2) | |
1491 | ||
1492 | cpu Internal CPU clock source | |
1493 | ||
1494 | cpu is the preferred clocksource if it is reliable, as it | |
1495 | is very fast (and fio is heavy on time calls). Fio will | |
1496 | automatically use this clocksource if it's supported and | |
1497 | considered reliable on the system it is running on, unless | |
1498 | another clocksource is specifically set. For x86/x86-64 CPUs, | |
1499 | this means supporting TSC Invariant. | |
1500 | ||
993bf48b JA |
1501 | gtod_reduce=bool Enable all of the gettimeofday() reducing options |
1502 | (disable_clat, disable_slat, disable_bw) plus reduce | |
1503 | precision of the timeout somewhat to really shrink | |
1504 | the gettimeofday() call count. With this option enabled, | |
1505 | we only do about 0.4% of the gtod() calls we would have | |
1506 | done if all time keeping was enabled. | |
1507 | ||
be4ecfdf JA |
1508 | gtod_cpu=int Sometimes it's cheaper to dedicate a single thread of |
1509 | execution to just getting the current time. Fio (and | |
1510 | databases, for instance) are very intensive on gettimeofday() | |
1511 | calls. With this option, you can set one CPU aside for | |
1512 | doing nothing but logging current time to a shared memory | |
1513 | location. Then the other threads/processes that run IO | |
1514 | workloads need only copy that segment, instead of entering | |
1515 | the kernel with a gettimeofday() call. The CPU set aside | |
1516 | for doing these time calls will be excluded from other | |
1517 | uses. Fio will manually clear it from the CPU mask of other | |
1518 | jobs. | |
a696fa2a | 1519 | |
06842027 | 1520 | continue_on_error=str Normally fio will exit the job on the first observed |
f2bba182 RR |
1521 | failure. If this option is set, fio will continue the job when |
1522 | there is a 'non-fatal error' (EIO or EILSEQ) until the runtime | |
1523 | is exceeded or the I/O size specified is completed. If this | |
1524 | option is used, there are two more stats that are appended, | |
1525 | the total error count and the first error. The error field | |
1526 | given in the stats is the first error that was hit during the | |
1527 | run. | |
be4ecfdf | 1528 | |
06842027 SL |
1529 | The allowed values are: |
1530 | ||
1531 | none Exit on any IO or verify errors. | |
1532 | ||
1533 | read Continue on read errors, exit on all others. | |
1534 | ||
1535 | write Continue on write errors, exit on all others. | |
1536 | ||
1537 | io Continue on any IO error, exit on all others. | |
1538 | ||
1539 | verify Continue on verify errors, exit on all others. | |
1540 | ||
1541 | all Continue on all errors. | |
1542 | ||
1543 | 0 Backward-compatible alias for 'none'. | |
1544 | ||
1545 | 1 Backward-compatible alias for 'all'. | |
1546 | ||
8b28bd41 DM |
1547 | ignore_error=str Sometimes you want to ignore some errors during test |
1548 | in that case you can specify error list for each error type. | |
1549 | ignore_error=READ_ERR_LIST,WRITE_ERR_LIST,VERIFY_ERR_LIST | |
1550 | errors for given error type is separated with ':'. Error | |
1551 | may be symbol ('ENOSPC', 'ENOMEM') or integer. | |
1552 | Example: | |
1553 | ignore_error=EAGAIN,ENOSPC:122 | |
66c098b8 BC |
1554 | This option will ignore EAGAIN from READ, and ENOSPC and |
1555 | 122(EDQUOT) from WRITE. | |
8b28bd41 DM |
1556 | |
1557 | error_dump=bool If set dump every error even if it is non fatal, true | |
1558 | by default. If disabled only fatal error will be dumped | |
66c098b8 | 1559 | |
6adb38a1 JA |
1560 | cgroup=str Add job to this control group. If it doesn't exist, it will |
1561 | be created. The system must have a mounted cgroup blkio | |
1562 | mount point for this to work. If your system doesn't have it | |
1563 | mounted, you can do so with: | |
a696fa2a JA |
1564 | |
1565 | # mount -t cgroup -o blkio none /cgroup | |
1566 | ||
a696fa2a JA |
1567 | cgroup_weight=int Set the weight of the cgroup to this value. See |
1568 | the documentation that comes with the kernel, allowed values | |
1569 | are in the range of 100..1000. | |
71bfa161 | 1570 | |
7de87099 VG |
1571 | cgroup_nodelete=bool Normally fio will delete the cgroups it has created after |
1572 | the job completion. To override this behavior and to leave | |
1573 | cgroups around after the job completion, set cgroup_nodelete=1. | |
1574 | This can be useful if one wants to inspect various cgroup | |
1575 | files after job completion. Default: false | |
1576 | ||
e0b0d892 JA |
1577 | uid=int Instead of running as the invoking user, set the user ID to |
1578 | this value before the thread/process does any work. | |
1579 | ||
1580 | gid=int Set group ID, see uid. | |
1581 | ||
9e684a49 DE |
1582 | flow_id=int The ID of the flow. If not specified, it defaults to being a |
1583 | global flow. See flow. | |
1584 | ||
1585 | flow=int Weight in token-based flow control. If this value is used, then | |
1586 | there is a 'flow counter' which is used to regulate the | |
1587 | proportion of activity between two or more jobs. fio attempts | |
1588 | to keep this flow counter near zero. The 'flow' parameter | |
1589 | stands for how much should be added or subtracted to the flow | |
1590 | counter on each iteration of the main I/O loop. That is, if | |
1591 | one job has flow=8 and another job has flow=-1, then there | |
1592 | will be a roughly 1:8 ratio in how much one runs vs the other. | |
1593 | ||
1594 | flow_watermark=int The maximum value that the absolute value of the flow | |
1595 | counter is allowed to reach before the job must wait for a | |
1596 | lower value of the counter. | |
1597 | ||
1598 | flow_sleep=int The period of time, in microseconds, to wait after the flow | |
1599 | watermark has been exceeded before retrying operations | |
1600 | ||
de890a1e SL |
1601 | In addition, there are some parameters which are only valid when a specific |
1602 | ioengine is in use. These are used identically to normal parameters, with the | |
1603 | caveat that when used on the command line, they must come after the ioengine | |
1604 | that defines them is selected. | |
1605 | ||
1606 | [libaio] userspace_reap Normally, with the libaio engine in use, fio will use | |
1607 | the io_getevents system call to reap newly returned events. | |
1608 | With this flag turned on, the AIO ring will be read directly | |
1609 | from user-space to reap events. The reaping mode is only | |
1610 | enabled when polling for a minimum of 0 events (eg when | |
1611 | iodepth_batch_complete=0). | |
1612 | ||
0353050f JA |
1613 | [cpu] cpuload=int Attempt to use the specified percentage of CPU cycles. |
1614 | ||
1615 | [cpu] cpuchunks=int Split the load into cycles of the given time. In | |
1616 | microseconds. | |
1617 | ||
046395d7 JA |
1618 | [cpu] exit_on_io_done=bool Detect when IO threads are done, then exit. |
1619 | ||
de890a1e SL |
1620 | [netsplice] hostname=str |
1621 | [net] hostname=str The host name or IP address to use for TCP or UDP based IO. | |
1622 | If the job is a TCP listener or UDP reader, the hostname is not | |
b511c9aa SB |
1623 | used and must be omitted unless it is a valid UDP multicast |
1624 | address. | |
de890a1e SL |
1625 | |
1626 | [netsplice] port=int | |
1627 | [net] port=int The TCP or UDP port to bind to or connect to. | |
1628 | ||
b93b6a2e SB |
1629 | [netsplice] interface=str |
1630 | [net] interface=str The IP address of the network interface used to send or | |
1631 | receive UDP multicast | |
1632 | ||
d3a623de SB |
1633 | [netsplice] ttl=int |
1634 | [net] ttl=int Time-to-live value for outgoing UDP multicast packets. | |
1635 | Default: 1 | |
1636 | ||
1d360ffb JA |
1637 | [netsplice] nodelay=bool |
1638 | [net] nodelay=bool Set TCP_NODELAY on TCP connections. | |
1639 | ||
de890a1e SL |
1640 | [netsplice] protocol=str |
1641 | [netsplice] proto=str | |
1642 | [net] protocol=str | |
1643 | [net] proto=str The network protocol to use. Accepted values are: | |
1644 | ||
1645 | tcp Transmission control protocol | |
49ccb8c1 | 1646 | tcpv6 Transmission control protocol V6 |
f5cc3d0e | 1647 | udp User datagram protocol |
49ccb8c1 | 1648 | udpv6 User datagram protocol V6 |
de890a1e SL |
1649 | unix UNIX domain socket |
1650 | ||
1651 | When the protocol is TCP or UDP, the port must also be given, | |
1652 | as well as the hostname if the job is a TCP listener or UDP | |
1653 | reader. For unix sockets, the normal filename option should be | |
1654 | used and the port is invalid. | |
1655 | ||
1656 | [net] listen For TCP network connections, tell fio to listen for incoming | |
1657 | connections rather than initiating an outgoing connection. The | |
1658 | hostname must be omitted if this option is used. | |
b511c9aa | 1659 | [net] pingpong Normaly a network writer will just continue writing data, and |
7aeb1e94 JA |
1660 | a network reader will just consume packages. If pingpong=1 |
1661 | is set, a writer will send its normal payload to the reader, | |
1662 | then wait for the reader to send the same payload back. This | |
1663 | allows fio to measure network latencies. The submission | |
1664 | and completion latencies then measure local time spent | |
1665 | sending or receiving, and the completion latency measures | |
1666 | how long it took for the other end to receive and send back. | |
b511c9aa SB |
1667 | For UDP multicast traffic pingpong=1 should only be set for a |
1668 | single reader when multiple readers are listening to the same | |
1669 | address. | |
7aeb1e94 | 1670 | |
d54fce84 DM |
1671 | [e4defrag] donorname=str |
1672 | File will be used as a block donor(swap extents between files) | |
1673 | [e4defrag] inplace=int | |
66c098b8 | 1674 | Configure donor file blocks allocation strategy |
d54fce84 DM |
1675 | 0(default): Preallocate donor's file on init |
1676 | 1 : allocate space immidietly inside defragment event, | |
1677 | and free right after event | |
1678 | ||
de890a1e SL |
1679 | |
1680 | ||
71bfa161 JA |
1681 | 6.0 Interpreting the output |
1682 | --------------------------- | |
1683 | ||
1684 | fio spits out a lot of output. While running, fio will display the | |
1685 | status of the jobs created. An example of that would be: | |
1686 | ||
73c8b082 | 1687 | Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s] |
71bfa161 JA |
1688 | |
1689 | The characters inside the square brackets denote the current status of | |
1690 | each thread. The possible values (in typical life cycle order) are: | |
1691 | ||
1692 | Idle Run | |
1693 | ---- --- | |
1694 | P Thread setup, but not started. | |
1695 | C Thread created. | |
9c6f6316 | 1696 | I Thread initialized, waiting or generating necessary data. |
b0f65863 | 1697 | p Thread running pre-reading file(s). |
71bfa161 JA |
1698 | R Running, doing sequential reads. |
1699 | r Running, doing random reads. | |
1700 | W Running, doing sequential writes. | |
1701 | w Running, doing random writes. | |
1702 | M Running, doing mixed sequential reads/writes. | |
1703 | m Running, doing mixed random reads/writes. | |
1704 | F Running, currently waiting for fsync() | |
3d434057 | 1705 | f Running, finishing up (writing IO logs, etc) |
fc6bd43c | 1706 | V Running, doing verification of written data. |
71bfa161 | 1707 | E Thread exited, not reaped by main thread yet. |
4f7e57a4 JA |
1708 | _ Thread reaped, or |
1709 | X Thread reaped, exited with an error. | |
a5e371a6 | 1710 | K Thread reaped, exited due to signal. |
71bfa161 | 1711 | |
3e2e48a7 JA |
1712 | Fio will condense the thread string as not to take up more space on the |
1713 | command line as is needed. For instance, if you have 10 readers and 10 | |
1714 | writers running, the output would look like this: | |
1715 | ||
1716 | Jobs: 20 (f=20): [R(10),W(10)] [4.0% done] [2103MB/0KB/0KB /s] [538K/0/0 iops] [eta 57m:36s] | |
1717 | ||
1718 | Fio will still maintain the ordering, though. So the above means that jobs | |
1719 | 1..10 are readers, and 11..20 are writers. | |
1720 | ||
71bfa161 | 1721 | The other values are fairly self explanatory - number of threads |
c9f60304 JA |
1722 | currently running and doing io, rate of io since last check (read speed |
1723 | listed first, then write speed), and the estimated completion percentage | |
1724 | and time for the running group. It's impossible to estimate runtime of | |
4f7e57a4 JA |
1725 | the following groups (if any). Note that the string is displayed in order, |
1726 | so it's possible to tell which of the jobs are currently doing what. The | |
1727 | first character is the first job defined in the job file, and so forth. | |
71bfa161 JA |
1728 | |
1729 | When fio is done (or interrupted by ctrl-c), it will show the data for | |
1730 | each thread, group of threads, and disks in that order. For each data | |
1731 | direction, the output looks like: | |
1732 | ||
1733 | Client1 (g=0): err= 0: | |
35649e58 | 1734 | write: io= 32MB, bw= 666KB/s, iops=89 , runt= 50320msec |
6104ddb6 JA |
1735 | slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92 |
1736 | clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82 | |
b22989b9 | 1737 | bw (KB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68 |
e7823a94 | 1738 | cpu : usr=1.49%, sys=0.25%, ctx=7969, majf=0, minf=17 |
71619dc2 | 1739 | IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0% |
838bc709 JA |
1740 | submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% |
1741 | complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% | |
30061b97 | 1742 | issued r/w: total=0/32768, short=0/0 |
8abdce66 JA |
1743 | lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%, |
1744 | lat (msec): 250=15.2%, 500=0.0%, 750=0.0%, 1000=0.0%, >=2048=0.0% | |
71bfa161 JA |
1745 | |
1746 | The client number is printed, along with the group id and error of that | |
1747 | thread. Below is the io statistics, here for writes. In the order listed, | |
1748 | they denote: | |
1749 | ||
1750 | io= Number of megabytes io performed | |
1751 | bw= Average bandwidth rate | |
35649e58 | 1752 | iops= Average IOs performed per second |
71bfa161 | 1753 | runt= The runtime of that thread |
72fbda2a | 1754 | slat= Submission latency (avg being the average, stdev being the |
71bfa161 JA |
1755 | standard deviation). This is the time it took to submit |
1756 | the io. For sync io, the slat is really the completion | |
8a35c71e | 1757 | latency, since queue/complete is one operation there. This |
bf9a3edb | 1758 | value can be in milliseconds or microseconds, fio will choose |
8a35c71e | 1759 | the most appropriate base and print that. In the example |
0d237712 LAG |
1760 | above, milliseconds is the best scale. Note: in --minimal mode |
1761 | latencies are always expressed in microseconds. | |
71bfa161 JA |
1762 | clat= Completion latency. Same names as slat, this denotes the |
1763 | time from submission to completion of the io pieces. For | |
1764 | sync io, clat will usually be equal (or very close) to 0, | |
1765 | as the time from submit to complete is basically just | |
1766 | CPU time (io has already been done, see slat explanation). | |
1767 | bw= Bandwidth. Same names as the xlat stats, but also includes | |
1768 | an approximate percentage of total aggregate bandwidth | |
1769 | this thread received in this group. This last value is | |
1770 | only really useful if the threads in this group are on the | |
1771 | same disk, since they are then competing for disk access. | |
1772 | cpu= CPU usage. User and system time, along with the number | |
e7823a94 JA |
1773 | of context switches this thread went through, usage of |
1774 | system and user time, and finally the number of major | |
1775 | and minor page faults. | |
71619dc2 JA |
1776 | IO depths= The distribution of io depths over the job life time. The |
1777 | numbers are divided into powers of 2, so for example the | |
1778 | 16= entries includes depths up to that value but higher | |
1779 | than the previous entry. In other words, it covers the | |
1780 | range from 16 to 31. | |
838bc709 JA |
1781 | IO submit= How many pieces of IO were submitting in a single submit |
1782 | call. Each entry denotes that amount and below, until | |
1783 | the previous entry - eg, 8=100% mean that we submitted | |
1784 | anywhere in between 5-8 ios per submit call. | |
1785 | IO complete= Like the above submit number, but for completions instead. | |
30061b97 JA |
1786 | IO issued= The number of read/write requests issued, and how many |
1787 | of them were short. | |
ec118304 JA |
1788 | IO latencies= The distribution of IO completion latencies. This is the |
1789 | time from when IO leaves fio and when it gets completed. | |
1790 | The numbers follow the same pattern as the IO depths, | |
1791 | meaning that 2=1.6% means that 1.6% of the IO completed | |
8abdce66 JA |
1792 | within 2 msecs, 20=12.8% means that 12.8% of the IO |
1793 | took more than 10 msecs, but less than (or equal to) 20 msecs. | |
71bfa161 JA |
1794 | |
1795 | After each client has been listed, the group statistics are printed. They | |
1796 | will look like this: | |
1797 | ||
1798 | Run status group 0 (all jobs): | |
b22989b9 JA |
1799 | READ: io=64MB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec |
1800 | WRITE: io=64MB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec | |
71bfa161 JA |
1801 | |
1802 | For each data direction, it prints: | |
1803 | ||
1804 | io= Number of megabytes io performed. | |
1805 | aggrb= Aggregate bandwidth of threads in this group. | |
1806 | minb= The minimum average bandwidth a thread saw. | |
1807 | maxb= The maximum average bandwidth a thread saw. | |
1808 | mint= The smallest runtime of the threads in that group. | |
1809 | maxt= The longest runtime of the threads in that group. | |
1810 | ||
1811 | And finally, the disk statistics are printed. They will look like this: | |
1812 | ||
1813 | Disk stats (read/write): | |
1814 | sda: ios=16398/16511, merge=30/162, ticks=6853/819634, in_queue=826487, util=100.00% | |
1815 | ||
1816 | Each value is printed for both reads and writes, with reads first. The | |
1817 | numbers denote: | |
1818 | ||
1819 | ios= Number of ios performed by all groups. | |
1820 | merge= Number of merges io the io scheduler. | |
1821 | ticks= Number of ticks we kept the disk busy. | |
1822 | io_queue= Total time spent in the disk queue. | |
1823 | util= The disk utilization. A value of 100% means we kept the disk | |
1824 | busy constantly, 50% would be a disk idling half of the time. | |
1825 | ||
8423bd11 JA |
1826 | It is also possible to get fio to dump the current output while it is |
1827 | running, without terminating the job. To do that, send fio the USR1 signal. | |
06464907 JA |
1828 | You can also get regularly timed dumps by using the --status-interval |
1829 | parameter, or by creating a file in /tmp named fio-dump-status. If fio | |
1830 | sees this file, it will unlink it and dump the current output status. | |
8423bd11 | 1831 | |
71bfa161 JA |
1832 | |
1833 | 7.0 Terse output | |
1834 | ---------------- | |
1835 | ||
1836 | For scripted usage where you typically want to generate tables or graphs | |
6af019c9 | 1837 | of the results, fio can output the results in a semicolon separated format. |
71bfa161 JA |
1838 | The format is one long line of values, such as: |
1839 | ||
562c2d2f DN |
1840 | 2;card0;0;0;7139336;121836;60004;1;10109;27.932460;116.933948;220;126861;3495.446807;1085.368601;226;126864;3523.635629;1089.012448;24063;99944;50.275485%;59818.274627;5540.657370;7155060;122104;60004;1;8338;29.086342;117.839068;388;128077;5032.488518;1234.785715;391;128085;5061.839412;1236.909129;23436;100928;50.287926%;59964.832030;5644.844189;14.595833%;19.394167%;123706;0;7313;0.1%;0.1%;0.1%;0.1%;0.1%;0.1%;100.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.02%;0.05%;0.16%;6.04%;40.40%;52.68%;0.64%;0.01%;0.00%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00% |
1841 | A description of this job goes here. | |
1842 | ||
1843 | The job description (if provided) follows on a second line. | |
71bfa161 | 1844 | |
525c2bfa JA |
1845 | To enable terse output, use the --minimal command line option. The first |
1846 | value is the version of the terse output format. If the output has to | |
1847 | be changed for some reason, this number will be incremented by 1 to | |
1848 | signify that change. | |
6820cb3b | 1849 | |
71bfa161 JA |
1850 | Split up, the format is as follows: |
1851 | ||
5e726d0a | 1852 | terse version, fio version, jobname, groupid, error |
71bfa161 | 1853 | READ status: |
312b4af2 | 1854 | Total IO (KB), bandwidth (KB/sec), IOPS, runtime (msec) |
de196b82 JA |
1855 | Submission latency: min, max, mean, deviation (usec) |
1856 | Completion latency: min, max, mean, deviation (usec) | |
1db92cb6 | 1857 | Completion latency percentiles: 20 fields (see below) |
de196b82 | 1858 | Total latency: min, max, mean, deviation (usec) |
0d237712 | 1859 | Bw (KB/s): min, max, aggregate percentage of total, mean, deviation |
71bfa161 | 1860 | WRITE status: |
312b4af2 | 1861 | Total IO (KB), bandwidth (KB/sec), IOPS, runtime (msec) |
de196b82 JA |
1862 | Submission latency: min, max, mean, deviation (usec) |
1863 | Completion latency: min, max, mean, deviation (usec) | |
1db92cb6 | 1864 | Completion latency percentiles: 20 fields (see below) |
de196b82 | 1865 | Total latency: min, max, mean, deviation (usec) |
0d237712 | 1866 | Bw (KB/s): min, max, aggregate percentage of total, mean, deviation |
046ee302 | 1867 | CPU usage: user, system, context switches, major faults, minor faults |
2270890c | 1868 | IO depths: <=1, 2, 4, 8, 16, 32, >=64 |
562c2d2f DN |
1869 | IO latencies microseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000 |
1870 | IO latencies milliseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, 2000, >=2000 | |
f2f788dd JA |
1871 | Disk utilization: Disk name, Read ios, write ios, |
1872 | Read merges, write merges, | |
1873 | Read ticks, write ticks, | |
3d7cd9b4 | 1874 | Time spent in queue, disk utilization percentage |
de8f6de9 | 1875 | Additional Info (dependent on continue_on_error, default off): total # errors, first error code |
66c098b8 | 1876 | |
de8f6de9 | 1877 | Additional Info (dependent on description being set): Text description |
25c8b9d7 | 1878 | |
1db92cb6 JA |
1879 | Completion latency percentiles can be a grouping of up to 20 sets, so |
1880 | for the terse output fio writes all of them. Each field will look like this: | |
1881 | ||
1882 | 1.00%=6112 | |
1883 | ||
1884 | which is the Xth percentile, and the usec latency associated with it. | |
1885 | ||
f2f788dd JA |
1886 | For disk utilization, all disks used by fio are shown. So for each disk |
1887 | there will be a disk utilization section. | |
1888 | ||
25c8b9d7 PD |
1889 | |
1890 | 8.0 Trace file format | |
1891 | --------------------- | |
66c098b8 | 1892 | There are two trace file format that you can encounter. The older (v1) format |
25c8b9d7 PD |
1893 | is unsupported since version 1.20-rc3 (March 2008). It will still be described |
1894 | below in case that you get an old trace and want to understand it. | |
1895 | ||
1896 | In any case the trace is a simple text file with a single action per line. | |
1897 | ||
1898 | ||
1899 | 8.1 Trace file format v1 | |
1900 | ------------------------ | |
1901 | Each line represents a single io action in the following format: | |
1902 | ||
1903 | rw, offset, length | |
1904 | ||
1905 | where rw=0/1 for read/write, and the offset and length entries being in bytes. | |
1906 | ||
1907 | This format is not supported in Fio versions => 1.20-rc3. | |
1908 | ||
1909 | ||
1910 | 8.2 Trace file format v2 | |
1911 | ------------------------ | |
1912 | The second version of the trace file format was added in Fio version 1.17. | |
1913 | It allows to access more then one file per trace and has a bigger set of | |
1914 | possible file actions. | |
1915 | ||
1916 | The first line of the trace file has to be: | |
1917 | ||
1918 | fio version 2 iolog | |
1919 | ||
1920 | Following this can be lines in two different formats, which are described below. | |
1921 | ||
1922 | The file management format: | |
1923 | ||
1924 | filename action | |
1925 | ||
1926 | The filename is given as an absolute path. The action can be one of these: | |
1927 | ||
1928 | add Add the given filename to the trace | |
66c098b8 | 1929 | open Open the file with the given filename. The filename has to have |
25c8b9d7 PD |
1930 | been added with the add action before. |
1931 | close Close the file with the given filename. The file has to have been | |
1932 | opened before. | |
1933 | ||
1934 | ||
1935 | The file io action format: | |
1936 | ||
1937 | filename action offset length | |
1938 | ||
1939 | The filename is given as an absolute path, and has to have been added and opened | |
66c098b8 | 1940 | before it can be used with this format. The offset and length are given in |
25c8b9d7 PD |
1941 | bytes. The action can be one of these: |
1942 | ||
1943 | wait Wait for 'offset' microseconds. Everything below 100 is discarded. | |
1944 | read Read 'length' bytes beginning from 'offset' | |
1945 | write Write 'length' bytes beginning from 'offset' | |
1946 | sync fsync() the file | |
1947 | datasync fdatasync() the file | |
1948 | trim trim the given file from the given 'offset' for 'length' bytes | |
f2a2ce0e HL |
1949 | |
1950 | ||
1951 | 9.0 CPU idleness profiling | |
06464907 | 1952 | -------------------------- |
f2a2ce0e HL |
1953 | In some cases, we want to understand CPU overhead in a test. For example, |
1954 | we test patches for the specific goodness of whether they reduce CPU usage. | |
1955 | fio implements a balloon approach to create a thread per CPU that runs at | |
1956 | idle priority, meaning that it only runs when nobody else needs the cpu. | |
1957 | By measuring the amount of work completed by the thread, idleness of each | |
1958 | CPU can be derived accordingly. | |
1959 | ||
1960 | An unit work is defined as touching a full page of unsigned characters. Mean | |
1961 | and standard deviation of time to complete an unit work is reported in "unit | |
1962 | work" section. Options can be chosen to report detailed percpu idleness or | |
1963 | overall system idleness by aggregating percpu stats. |