Commit | Line | Data |
---|---|---|
71bfa161 JA |
1 | Table of contents |
2 | ----------------- | |
3 | ||
4 | 1. Overview | |
5 | 2. How fio works | |
6 | 3. Running fio | |
7 | 4. Job file format | |
8 | 5. Detailed list of parameters | |
9 | 6. Normal output | |
10 | 7. Terse output | |
25c8b9d7 | 11 | 8. Trace file format |
71bfa161 JA |
12 | |
13 | 1.0 Overview and history | |
14 | ------------------------ | |
15 | fio was originally written to save me the hassle of writing special test | |
16 | case programs when I wanted to test a specific workload, either for | |
17 | performance reasons or to find/reproduce a bug. The process of writing | |
18 | such a test app can be tiresome, especially if you have to do it often. | |
19 | Hence I needed a tool that would be able to simulate a given io workload | |
20 | without resorting to writing a tailored test case again and again. | |
21 | ||
22 | A test work load is difficult to define, though. There can be any number | |
23 | of processes or threads involved, and they can each be using their own | |
24 | way of generating io. You could have someone dirtying large amounts of | |
25 | memory in an memory mapped file, or maybe several threads issuing | |
26 | reads using asynchronous io. fio needed to be flexible enough to | |
27 | simulate both of these cases, and many more. | |
28 | ||
29 | 2.0 How fio works | |
30 | ----------------- | |
31 | The first step in getting fio to simulate a desired io workload, is | |
32 | writing a job file describing that specific setup. A job file may contain | |
33 | any number of threads and/or files - the typical contents of the job file | |
34 | is a global section defining shared parameters, and one or more job | |
35 | sections describing the jobs involved. When run, fio parses this file | |
36 | and sets everything up as described. If we break down a job from top to | |
37 | bottom, it contains the following basic parameters: | |
38 | ||
39 | IO type Defines the io pattern issued to the file(s). | |
40 | We may only be reading sequentially from this | |
41 | file(s), or we may be writing randomly. Or even | |
42 | mixing reads and writes, sequentially or randomly. | |
43 | ||
44 | Block size In how large chunks are we issuing io? This may be | |
45 | a single value, or it may describe a range of | |
46 | block sizes. | |
47 | ||
48 | IO size How much data are we going to be reading/writing. | |
49 | ||
50 | IO engine How do we issue io? We could be memory mapping the | |
51 | file, we could be using regular read/write, we | |
d0ff85df | 52 | could be using splice, async io, syslet, or even |
71bfa161 JA |
53 | SG (SCSI generic sg). |
54 | ||
6c219763 | 55 | IO depth If the io engine is async, how large a queuing |
71bfa161 JA |
56 | depth do we want to maintain? |
57 | ||
58 | IO type Should we be doing buffered io, or direct/raw io? | |
59 | ||
60 | Num files How many files are we spreading the workload over. | |
61 | ||
62 | Num threads How many threads or processes should we spread | |
63 | this workload over. | |
64 | ||
65 | The above are the basic parameters defined for a workload, in addition | |
66 | there's a multitude of parameters that modify other aspects of how this | |
67 | job behaves. | |
68 | ||
69 | ||
70 | 3.0 Running fio | |
71 | --------------- | |
72 | See the README file for command line parameters, there are only a few | |
73 | of them. | |
74 | ||
75 | Running fio is normally the easiest part - you just give it the job file | |
76 | (or job files) as parameters: | |
77 | ||
78 | $ fio job_file | |
79 | ||
80 | and it will start doing what the job_file tells it to do. You can give | |
81 | more than one job file on the command line, fio will serialize the running | |
82 | of those files. Internally that is the same as using the 'stonewall' | |
83 | parameter described the the parameter section. | |
84 | ||
b4692828 JA |
85 | If the job file contains only one job, you may as well just give the |
86 | parameters on the command line. The command line parameters are identical | |
87 | to the job parameters, with a few extra that control global parameters | |
88 | (see README). For example, for the job file parameter iodepth=2, the | |
c2b1e753 JA |
89 | mirror command line option would be --iodepth 2 or --iodepth=2. You can |
90 | also use the command line for giving more than one job entry. For each | |
91 | --name option that fio sees, it will start a new job with that name. | |
92 | Command line entries following a --name entry will apply to that job, | |
93 | until there are no more entries or a new --name entry is seen. This is | |
94 | similar to the job file options, where each option applies to the current | |
95 | job until a new [] job entry is seen. | |
b4692828 | 96 | |
71bfa161 JA |
97 | fio does not need to run as root, except if the files or devices specified |
98 | in the job section requires that. Some other options may also be restricted, | |
6c219763 | 99 | such as memory locking, io scheduler switching, and decreasing the nice value. |
71bfa161 JA |
100 | |
101 | ||
102 | 4.0 Job file format | |
103 | ------------------- | |
104 | As previously described, fio accepts one or more job files describing | |
105 | what it is supposed to do. The job file format is the classic ini file, | |
106 | where the names enclosed in [] brackets define the job name. You are free | |
107 | to use any ascii name you want, except 'global' which has special meaning. | |
108 | A global section sets defaults for the jobs described in that file. A job | |
109 | may override a global section parameter, and a job file may even have | |
110 | several global sections if so desired. A job is only affected by a global | |
65db0851 JA |
111 | section residing above it. If the first character in a line is a ';' or a |
112 | '#', the entire line is discarded as a comment. | |
71bfa161 | 113 | |
3c54bc46 | 114 | So let's look at a really simple job file that defines two processes, each |
b22989b9 | 115 | randomly reading from a 128MB file. |
71bfa161 JA |
116 | |
117 | ; -- start job file -- | |
118 | [global] | |
119 | rw=randread | |
120 | size=128m | |
121 | ||
122 | [job1] | |
123 | ||
124 | [job2] | |
125 | ||
126 | ; -- end job file -- | |
127 | ||
128 | As you can see, the job file sections themselves are empty as all the | |
129 | described parameters are shared. As no filename= option is given, fio | |
c2b1e753 JA |
130 | makes up a filename for each of the jobs as it sees fit. On the command |
131 | line, this job would look as follows: | |
132 | ||
133 | $ fio --name=global --rw=randread --size=128m --name=job1 --name=job2 | |
134 | ||
71bfa161 | 135 | |
3c54bc46 | 136 | Let's look at an example that has a number of processes writing randomly |
71bfa161 JA |
137 | to files. |
138 | ||
139 | ; -- start job file -- | |
140 | [random-writers] | |
141 | ioengine=libaio | |
142 | iodepth=4 | |
143 | rw=randwrite | |
144 | bs=32k | |
145 | direct=0 | |
146 | size=64m | |
147 | numjobs=4 | |
148 | ||
149 | ; -- end job file -- | |
150 | ||
151 | Here we have no global section, as we only have one job defined anyway. | |
152 | We want to use async io here, with a depth of 4 for each file. We also | |
b22989b9 | 153 | increased the buffer size used to 32KB and define numjobs to 4 to |
71bfa161 | 154 | fork 4 identical jobs. The result is 4 processes each randomly writing |
b22989b9 | 155 | to their own 64MB file. Instead of using the above job file, you could |
b4692828 JA |
156 | have given the parameters on the command line. For this case, you would |
157 | specify: | |
158 | ||
159 | $ fio --name=random-writers --ioengine=libaio --iodepth=4 --rw=randwrite --bs=32k --direct=0 --size=64m --numjobs=4 | |
71bfa161 | 160 | |
74929ac2 JA |
161 | 4.1 Environment variables |
162 | ------------------------- | |
163 | ||
3c54bc46 AC |
164 | fio also supports environment variable expansion in job files. Any |
165 | substring of the form "${VARNAME}" as part of an option value (in other | |
166 | words, on the right of the `='), will be expanded to the value of the | |
167 | environment variable called VARNAME. If no such environment variable | |
168 | is defined, or VARNAME is the empty string, the empty string will be | |
169 | substituted. | |
170 | ||
171 | As an example, let's look at a sample fio invocation and job file: | |
172 | ||
173 | $ SIZE=64m NUMJOBS=4 fio jobfile.fio | |
174 | ||
175 | ; -- start job file -- | |
176 | [random-writers] | |
177 | rw=randwrite | |
178 | size=${SIZE} | |
179 | numjobs=${NUMJOBS} | |
180 | ; -- end job file -- | |
181 | ||
182 | This will expand to the following equivalent job file at runtime: | |
183 | ||
184 | ; -- start job file -- | |
185 | [random-writers] | |
186 | rw=randwrite | |
187 | size=64m | |
188 | numjobs=4 | |
189 | ; -- end job file -- | |
190 | ||
71bfa161 JA |
191 | fio ships with a few example job files, you can also look there for |
192 | inspiration. | |
193 | ||
74929ac2 JA |
194 | 4.2 Reserved keywords |
195 | --------------------- | |
196 | ||
197 | Additionally, fio has a set of reserved keywords that will be replaced | |
198 | internally with the appropriate value. Those keywords are: | |
199 | ||
200 | $pagesize The architecture page size of the running system | |
201 | $mb_memory Megabytes of total memory in the system | |
202 | $ncpus Number of online available CPUs | |
203 | ||
204 | These can be used on the command line or in the job file, and will be | |
205 | automatically substituted with the current system values when the job | |
892a6ffc JA |
206 | is run. Simple math is also supported on these keywords, so you can |
207 | perform actions like: | |
208 | ||
209 | size=8*$mb_memory | |
210 | ||
211 | and get that properly expanded to 8 times the size of memory in the | |
212 | machine. | |
74929ac2 | 213 | |
71bfa161 JA |
214 | |
215 | 5.0 Detailed list of parameters | |
216 | ------------------------------- | |
217 | ||
218 | This section describes in details each parameter associated with a job. | |
219 | Some parameters take an option of a given type, such as an integer or | |
220 | a string. The following types are used: | |
221 | ||
222 | str String. This is a sequence of alpha characters. | |
b09da8fa | 223 | time Integer with possible time suffix. In seconds unless otherwise |
e417fd66 JA |
224 | specified, use eg 10m for 10 minutes. Accepts s/m/h for seconds, |
225 | minutes, and hours. | |
b09da8fa JA |
226 | int SI integer. A whole number value, which may contain a suffix |
227 | describing the base of the number. Accepted suffixes are k/m/g/t/p, | |
228 | meaning kilo, mega, giga, tera, and peta. The suffix is not case | |
57fc29fa JA |
229 | sensitive, and you may also include trailing 'b' (eg 'kb' is the same |
230 | as 'k'). So if you want to specify 4096, you could either write | |
b09da8fa | 231 | out '4096' or just give 4k. The suffixes signify base 2 values, so |
57fc29fa JA |
232 | 1024 is 1k and 1024k is 1m and so on, unless the suffix is explicitly |
233 | set to a base 10 value using 'kib', 'mib', 'gib', etc. If that is the | |
234 | case, then 1000 is used as the multiplier. This can be handy for | |
235 | disks, since manufacturers generally use base 10 values when listing | |
236 | the capacity of a drive. If the option accepts an upper and lower | |
237 | range, use a colon ':' or minus '-' to separate such values. May also | |
238 | include a prefix to indicate numbers base. If 0x is used, the number | |
239 | is assumed to be hexadecimal. See irange. | |
71bfa161 JA |
240 | bool Boolean. Usually parsed as an integer, however only defined for |
241 | true and false (1 and 0). | |
b09da8fa | 242 | irange Integer range with suffix. Allows value range to be given, such |
bf9a3edb | 243 | as 1024-4096. A colon may also be used as the separator, eg |
0c9baf91 JA |
244 | 1k:4k. If the option allows two sets of ranges, they can be |
245 | specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see | |
f7fa2653 | 246 | int. |
83349190 | 247 | float_list A list of floating numbers, separated by a ':' character. |
71bfa161 JA |
248 | |
249 | With the above in mind, here follows the complete list of fio job | |
250 | parameters. | |
251 | ||
252 | name=str ASCII name of the job. This may be used to override the | |
253 | name printed by fio for this job. Otherwise the job | |
c2b1e753 | 254 | name is used. On the command line this parameter has the |
6c219763 | 255 | special purpose of also signaling the start of a new |
c2b1e753 | 256 | job. |
71bfa161 | 257 | |
61697c37 JA |
258 | description=str Text description of the job. Doesn't do anything except |
259 | dump this text description when this job is run. It's | |
260 | not parsed. | |
261 | ||
3776041e | 262 | directory=str Prefix filenames with this directory. Used to place files |
71bfa161 JA |
263 | in a different location than "./". |
264 | ||
265 | filename=str Fio normally makes up a filename based on the job name, | |
266 | thread number, and file number. If you want to share | |
267 | files between threads in a job or several jobs, specify | |
ed92ac0c | 268 | a filename for each of them to override the default. If |
414c2a3e JA |
269 | the ioengine used is 'net', the filename is the host, port, |
270 | and protocol to use in the format of =host/port/protocol. | |
271 | See ioengine=net for more. If the ioengine is file based, you | |
272 | can specify a number of files by separating the names with a | |
273 | ':' colon. So if you wanted a job to open /dev/sda and /dev/sdb | |
274 | as the two working files, you would use | |
03e20d68 | 275 | filename=/dev/sda:/dev/sdb. On Windows, disk devices are accessed |
ecc314ba BC |
276 | as \\.\PhysicalDrive0 for the first device, \\.\PhysicalDrive1 |
277 | for the second etc. If the wanted filename does need to | |
278 | include a colon, then escape that with a '\' character. | |
279 | For instance, if the filename is "/dev/dsk/foo@3,0:c", | |
280 | then you would use filename="/dev/dsk/foo@3,0\:c". | |
03e20d68 BC |
281 | '-' is a reserved name, meaning stdin or stdout. Which of the |
282 | two depends on the read/write direction set. | |
71bfa161 | 283 | |
bbf6b540 JA |
284 | opendir=str Tell fio to recursively add any file it can find in this |
285 | directory and down the file system tree. | |
286 | ||
3776041e | 287 | lockfile=str Fio defaults to not locking any files before it does |
4d4e80f2 JA |
288 | IO to them. If a file or file descriptor is shared, fio |
289 | can serialize IO to that file to make the end result | |
290 | consistent. This is usual for emulating real workloads that | |
291 | share files. The lock modes are: | |
292 | ||
293 | none No locking. The default. | |
294 | exclusive Only one thread/process may do IO, | |
295 | excluding all others. | |
296 | readwrite Read-write locking on the file. Many | |
297 | readers may access the file at the | |
298 | same time, but writes get exclusive | |
299 | access. | |
300 | ||
301 | The option may be post-fixed with a lock batch number. If | |
302 | set, then each thread/process may do that amount of IOs to | |
bf9a3edb | 303 | the file before giving up the lock. Since lock acquisition is |
4d4e80f2 | 304 | expensive, batching the lock/unlocks will speed up IO. |
29c1349f | 305 | |
d3aad8f2 | 306 | readwrite=str |
71bfa161 JA |
307 | rw=str Type of io pattern. Accepted values are: |
308 | ||
309 | read Sequential reads | |
310 | write Sequential writes | |
311 | randwrite Random writes | |
312 | randread Random reads | |
313 | rw Sequential mixed reads and writes | |
314 | randrw Random mixed reads and writes | |
315 | ||
316 | For the mixed io types, the default is to split them 50/50. | |
317 | For certain types of io the result may still be skewed a bit, | |
211097b2 | 318 | since the speed may be different. It is possible to specify |
38dad62d JA |
319 | a number of IO's to do before getting a new offset, this is |
320 | one by appending a ':<nr>' to the end of the string given. | |
321 | For a random read, it would look like 'rw=randread:8' for | |
322 | passing in an offset modifier with a value of 8. See the | |
323 | 'rw_sequencer' option. | |
324 | ||
325 | rw_sequencer=str If an offset modifier is given by appending a number to | |
326 | the rw=<str> line, then this option controls how that | |
327 | number modifies the IO offset being generated. Accepted | |
328 | values are: | |
329 | ||
330 | sequential Generate sequential offset | |
331 | identical Generate the same offset | |
332 | ||
333 | 'sequential' is only useful for random IO, where fio would | |
334 | normally generate a new random offset for every IO. If you | |
335 | append eg 8 to randread, you would get a new random offset for | |
211097b2 JA |
336 | every 8 IO's. The result would be a seek for only every 8 |
337 | IO's, instead of for every IO. Use rw=randread:8 to specify | |
38dad62d JA |
338 | that. As sequential IO is already sequential, setting |
339 | 'sequential' for that would not result in any differences. | |
340 | 'identical' behaves in a similar fashion, except it sends | |
341 | the same offset 8 number of times before generating a new | |
342 | offset. | |
71bfa161 | 343 | |
90fef2d1 JA |
344 | kb_base=int The base unit for a kilobyte. The defacto base is 2^10, 1024. |
345 | Storage manufacturers like to use 10^3 or 1000 as a base | |
346 | ten unit instead, for obvious reasons. Allow values are | |
347 | 1024 or 1000, with 1024 being the default. | |
348 | ||
ee738499 JA |
349 | randrepeat=bool For random IO workloads, seed the generator in a predictable |
350 | way so that results are repeatable across repetitions. | |
351 | ||
2615cc4b JA |
352 | use_os_rand=bool Fio can either use the random generator supplied by the OS |
353 | to generator random offsets, or it can use it's own internal | |
354 | generator (based on Tausworthe). Default is to use the | |
355 | internal generator, which is often of better quality and | |
356 | faster. | |
357 | ||
a596f047 EG |
358 | fallocate=str Whether pre-allocation is performed when laying down files. |
359 | Accepted values are: | |
360 | ||
361 | none Do not pre-allocate space | |
362 | posix Pre-allocate via posix_fallocate() | |
363 | keep Pre-allocate via fallocate() with | |
364 | FALLOC_FL_KEEP_SIZE set | |
365 | 0 Backward-compatible alias for 'none' | |
366 | 1 Backward-compatible alias for 'posix' | |
367 | ||
368 | May not be available on all supported platforms. 'keep' is only | |
369 | available on Linux.If using ZFS on Solaris this must be set to | |
370 | 'none' because ZFS doesn't support it. Default: 'posix'. | |
7bc8c2cf | 371 | |
d2f3ac35 JA |
372 | fadvise_hint=bool By default, fio will use fadvise() to advise the kernel |
373 | on what IO patterns it is likely to issue. Sometimes you | |
374 | want to test specific IO patterns without telling the | |
375 | kernel about it, in which case you can disable this option. | |
376 | If set, fio will use POSIX_FADV_SEQUENTIAL for sequential | |
377 | IO and POSIX_FADV_RANDOM for random IO. | |
378 | ||
f7fa2653 | 379 | size=int The total size of file io for this job. Fio will run until |
7616cafe JA |
380 | this many bytes has been transferred, unless runtime is |
381 | limited by other options (such as 'runtime', for instance). | |
3776041e | 382 | Unless specific nrfiles and filesize options are given, |
7616cafe | 383 | fio will divide this size between the available files |
d6667268 JA |
384 | specified by the job. If not set, fio will use the full |
385 | size of the given files or devices. If the the files | |
7bb59102 JA |
386 | do not exist, size must be given. It is also possible to |
387 | give size as a percentage between 1 and 100. If size=20% | |
388 | is given, fio will use 20% of the full size of the given | |
389 | files or devices. | |
71bfa161 | 390 | |
f7fa2653 | 391 | filesize=int Individual file sizes. May be a range, in which case fio |
9c60ce64 JA |
392 | will select sizes for files at random within the given range |
393 | and limited to 'size' in total (if that is given). If not | |
394 | given, each created file is the same size. | |
395 | ||
74586c1e JA |
396 | fill_device=bool |
397 | fill_fs=bool Sets size to something really large and waits for ENOSPC (no | |
aa31f1f1 | 398 | space left on device) as the terminating condition. Only makes |
3ce9dcaf | 399 | sense with sequential write. For a read workload, the mount |
4f12432e JA |
400 | point will be filled first then IO started on the result. This |
401 | option doesn't make sense if operating on a raw device node, | |
402 | since the size of that is already known by the file system. | |
403 | Additionally, writing beyond end-of-device will not return | |
404 | ENOSPC there. | |
aa31f1f1 | 405 | |
f7fa2653 JA |
406 | blocksize=int |
407 | bs=int The block size used for the io units. Defaults to 4k. Values | |
408 | can be given for both read and writes. If a single int is | |
409 | given, it will apply to both. If a second int is specified | |
f90eff5a JA |
410 | after a comma, it will apply to writes only. In other words, |
411 | the format is either bs=read_and_write or bs=read,write. | |
412 | bs=4k,8k will thus use 4k blocks for reads, and 8k blocks | |
787f7e95 JA |
413 | for writes. If you only wish to set the write size, you |
414 | can do so by passing an empty read size - bs=,8k will set | |
415 | 8k for writes and leave the read default value. | |
a00735e6 | 416 | |
2b7a01d0 JA |
417 | blockalign=int |
418 | ba=int At what boundary to align random IO offsets. Defaults to | |
419 | the same as 'blocksize' the minimum blocksize given. | |
420 | Minimum alignment is typically 512b for using direct IO, | |
421 | though it usually depends on the hardware block size. This | |
422 | option is mutually exclusive with using a random map for | |
423 | files, so it will turn off that option. | |
424 | ||
d3aad8f2 | 425 | blocksize_range=irange |
71bfa161 JA |
426 | bsrange=irange Instead of giving a single block size, specify a range |
427 | and fio will mix the issued io block sizes. The issued | |
428 | io unit will always be a multiple of the minimum value | |
f90eff5a JA |
429 | given (also see bs_unaligned). Applies to both reads and |
430 | writes, however a second range can be given after a comma. | |
431 | See bs=. | |
a00735e6 | 432 | |
564ca972 JA |
433 | bssplit=str Sometimes you want even finer grained control of the |
434 | block sizes issued, not just an even split between them. | |
435 | This option allows you to weight various block sizes, | |
436 | so that you are able to define a specific amount of | |
437 | block sizes issued. The format for this option is: | |
438 | ||
439 | bssplit=blocksize/percentage:blocksize/percentage | |
440 | ||
441 | for as many block sizes as needed. So if you want to define | |
442 | a workload that has 50% 64k blocks, 10% 4k blocks, and | |
443 | 40% 32k blocks, you would write: | |
444 | ||
445 | bssplit=4k/10:64k/50:32k/40 | |
446 | ||
447 | Ordering does not matter. If the percentage is left blank, | |
448 | fio will fill in the remaining values evenly. So a bssplit | |
449 | option like this one: | |
450 | ||
451 | bssplit=4k/50:1k/:32k/ | |
452 | ||
453 | would have 50% 4k ios, and 25% 1k and 32k ios. The percentages | |
454 | always add up to 100, if bssplit is given a range that adds | |
455 | up to more, it will error out. | |
456 | ||
720e84ad JA |
457 | bssplit also supports giving separate splits to reads and |
458 | writes. The format is identical to what bs= accepts. You | |
459 | have to separate the read and write parts with a comma. So | |
460 | if you want a workload that has 50% 2k reads and 50% 4k reads, | |
461 | while having 90% 4k writes and 10% 8k writes, you would | |
462 | specify: | |
463 | ||
464 | bssplit=2k/50:4k/50,4k/90,8k/10 | |
465 | ||
d3aad8f2 | 466 | blocksize_unaligned |
690adba3 JA |
467 | bs_unaligned If this option is given, any byte size value within bsrange |
468 | may be used as a block range. This typically wont work with | |
469 | direct IO, as that normally requires sector alignment. | |
71bfa161 | 470 | |
e9459e5a JA |
471 | zero_buffers If this option is given, fio will init the IO buffers to |
472 | all zeroes. The default is to fill them with random data. | |
473 | ||
5973cafb JA |
474 | refill_buffers If this option is given, fio will refill the IO buffers |
475 | on every submit. The default is to only fill it at init | |
476 | time and reuse that data. Only makes sense if zero_buffers | |
41ccd845 JA |
477 | isn't specified, naturally. If data verification is enabled, |
478 | refill_buffers is also automatically enabled. | |
5973cafb | 479 | |
71bfa161 JA |
480 | nrfiles=int Number of files to use for this job. Defaults to 1. |
481 | ||
390b1537 JA |
482 | openfiles=int Number of files to keep open at the same time. Defaults to |
483 | the same as nrfiles, can be set smaller to limit the number | |
484 | simultaneous opens. | |
485 | ||
5af1c6f3 JA |
486 | file_service_type=str Defines how fio decides which file from a job to |
487 | service next. The following types are defined: | |
488 | ||
489 | random Just choose a file at random. | |
490 | ||
491 | roundrobin Round robin over open files. This | |
492 | is the default. | |
493 | ||
a086c257 JA |
494 | sequential Finish one file before moving on to |
495 | the next. Multiple files can still be | |
496 | open depending on 'openfiles'. | |
497 | ||
1907dbc6 JA |
498 | The string can have a number appended, indicating how |
499 | often to switch to a new file. So if option random:4 is | |
500 | given, fio will switch to a new random file after 4 ios | |
501 | have been issued. | |
502 | ||
71bfa161 JA |
503 | ioengine=str Defines how the job issues io to the file. The following |
504 | types are defined: | |
505 | ||
506 | sync Basic read(2) or write(2) io. lseek(2) is | |
507 | used to position the io location. | |
508 | ||
a31041ea | 509 | psync Basic pread(2) or pwrite(2) io. |
510 | ||
e05af9e5 | 511 | vsync Basic readv(2) or writev(2) IO. |
1d2af02a | 512 | |
15d182aa JA |
513 | libaio Linux native asynchronous io. Note that Linux |
514 | may only support queued behaviour with | |
515 | non-buffered IO (set direct=1 or buffered=0). | |
71bfa161 JA |
516 | |
517 | posixaio glibc posix asynchronous io. | |
518 | ||
417f0068 JA |
519 | solarisaio Solaris native asynchronous io. |
520 | ||
03e20d68 BC |
521 | windowsaio Windows native asynchronous io. |
522 | ||
71bfa161 JA |
523 | mmap File is memory mapped and data copied |
524 | to/from using memcpy(3). | |
525 | ||
526 | splice splice(2) is used to transfer the data and | |
527 | vmsplice(2) to transfer data from user | |
528 | space to the kernel. | |
529 | ||
d0ff85df JA |
530 | syslet-rw Use the syslet system calls to make |
531 | regular read/write async. | |
532 | ||
71bfa161 | 533 | sg SCSI generic sg v3 io. May either be |
6c219763 | 534 | synchronous using the SG_IO ioctl, or if |
71bfa161 JA |
535 | the target is an sg character device |
536 | we use read(2) and write(2) for asynchronous | |
537 | io. | |
538 | ||
a94ea28b JA |
539 | null Doesn't transfer any data, just pretends |
540 | to. This is mainly used to exercise fio | |
541 | itself and for debugging/testing purposes. | |
542 | ||
ed92ac0c JA |
543 | net Transfer over the network to given host:port. |
544 | 'filename' must be set appropriately to | |
414c2a3e | 545 | filename=host/port/protocol regardless of send |
ed92ac0c | 546 | or receive, if the latter only the port |
414c2a3e JA |
547 | argument is used. 'host' may be an IP address |
548 | or hostname, port is the port number to be used, | |
549 | and protocol may be 'udp' or 'tcp'. If no | |
550 | protocol is given, TCP is used. | |
ed92ac0c | 551 | |
9cce02e8 JA |
552 | netsplice Like net, but uses splice/vmsplice to |
553 | map data and send/receive. | |
554 | ||
53aec0a4 | 555 | cpuio Doesn't transfer any data, but burns CPU |
ba0fbe10 JA |
556 | cycles according to the cpuload= and |
557 | cpucycle= options. Setting cpuload=85 | |
558 | will cause that job to do nothing but burn | |
36ecec83 GP |
559 | 85% of the CPU. In case of SMP machines, |
560 | use numjobs=<no_of_cpu> to get desired CPU | |
561 | usage, as the cpuload only loads a single | |
562 | CPU at the desired rate. | |
ba0fbe10 | 563 | |
e9a1806f JA |
564 | guasi The GUASI IO engine is the Generic Userspace |
565 | Asyncronous Syscall Interface approach | |
566 | to async IO. See | |
567 | ||
568 | http://www.xmailserver.org/guasi-lib.html | |
569 | ||
570 | for more info on GUASI. | |
571 | ||
21b8aee8 | 572 | rdma The RDMA I/O engine supports both RDMA |
eb52fa3f BVA |
573 | memory semantics (RDMA_WRITE/RDMA_READ) and |
574 | channel semantics (Send/Recv) for the | |
575 | InfiniBand, RoCE and iWARP protocols. | |
21b8aee8 | 576 | |
8a7bd877 JA |
577 | external Prefix to specify loading an external |
578 | IO engine object file. Append the engine | |
579 | filename, eg ioengine=external:/tmp/foo.o | |
580 | to load ioengine foo.o in /tmp. | |
581 | ||
71bfa161 JA |
582 | iodepth=int This defines how many io units to keep in flight against |
583 | the file. The default is 1 for each file defined in this | |
584 | job, can be overridden with a larger value for higher | |
ee72ca09 JA |
585 | concurrency. Note that increasing iodepth beyond 1 will not |
586 | affect synchronous ioengines (except for small degress when | |
9b836561 | 587 | verify_async is in use). Even async engines may impose OS |
ee72ca09 JA |
588 | restrictions causing the desired depth not to be achieved. |
589 | This may happen on Linux when using libaio and not setting | |
590 | direct=1, since buffered IO is not async on that OS. Keep an | |
591 | eye on the IO depth distribution in the fio output to verify | |
592 | that the achieved depth is as expected. Default: 1. | |
71bfa161 | 593 | |
4950421a | 594 | iodepth_batch_submit=int |
cb5ab512 | 595 | iodepth_batch=int This defines how many pieces of IO to submit at once. |
89e820f6 JA |
596 | It defaults to 1 which means that we submit each IO |
597 | as soon as it is available, but can be raised to submit | |
598 | bigger batches of IO at the time. | |
cb5ab512 | 599 | |
4950421a JA |
600 | iodepth_batch_complete=int This defines how many pieces of IO to retrieve |
601 | at once. It defaults to 1 which means that we'll ask | |
602 | for a minimum of 1 IO in the retrieval process from | |
603 | the kernel. The IO retrieval will go on until we | |
604 | hit the limit set by iodepth_low. If this variable is | |
605 | set to 0, then fio will always check for completed | |
606 | events before queuing more IO. This helps reduce | |
607 | IO latency, at the cost of more retrieval system calls. | |
608 | ||
e916b390 JA |
609 | iodepth_low=int The low water mark indicating when to start filling |
610 | the queue again. Defaults to the same as iodepth, meaning | |
611 | that fio will attempt to keep the queue full at all times. | |
612 | If iodepth is set to eg 16 and iodepth_low is set to 4, then | |
613 | after fio has filled the queue of 16 requests, it will let | |
614 | the depth drain down to 4 before starting to fill it again. | |
615 | ||
71bfa161 | 616 | direct=bool If value is true, use non-buffered io. This is usually |
9b836561 | 617 | O_DIRECT. Note that ZFS on Solaris doesn't support direct io. |
76a43db4 JA |
618 | |
619 | buffered=bool If value is true, use buffered io. This is the opposite | |
620 | of the 'direct' option. Defaults to true. | |
71bfa161 | 621 | |
f7fa2653 | 622 | offset=int Start io at the given offset in the file. The data before |
71bfa161 JA |
623 | the given offset will not be touched. This effectively |
624 | caps the file size at real_size - offset. | |
625 | ||
626 | fsync=int If writing to a file, issue a sync of the dirty data | |
627 | for every number of blocks given. For example, if you give | |
628 | 32 as a parameter, fio will sync the file for every 32 | |
629 | writes issued. If fio is using non-buffered io, we may | |
630 | not sync the file. The exception is the sg io engine, which | |
6c219763 | 631 | synchronizes the disk cache anyway. |
71bfa161 | 632 | |
e76b1da4 | 633 | fdatasync=int Like fsync= but uses fdatasync() to only sync data and not |
5f9099ea | 634 | metadata blocks. |
e72fa4d4 JA |
635 | In FreeBSD there is no fdatasync(), this falls back to |
636 | using fsync() | |
5f9099ea | 637 | |
e76b1da4 JA |
638 | sync_file_range=str:val Use sync_file_range() for every 'val' number of |
639 | write operations. Fio will track range of writes that | |
640 | have happened since the last sync_file_range() call. 'str' | |
641 | can currently be one or more of: | |
642 | ||
643 | wait_before SYNC_FILE_RANGE_WAIT_BEFORE | |
644 | write SYNC_FILE_RANGE_WRITE | |
645 | wait_after SYNC_FILE_RANGE_WAIT_AFTER | |
646 | ||
647 | So if you do sync_file_range=wait_before,write:8, fio would | |
648 | use SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE for | |
649 | every 8 writes. Also see the sync_file_range(2) man page. | |
650 | This option is Linux specific. | |
651 | ||
5036fc1e JA |
652 | overwrite=bool If true, writes to a file will always overwrite existing |
653 | data. If the file doesn't already exist, it will be | |
654 | created before the write phase begins. If the file exists | |
655 | and is large enough for the specified write phase, nothing | |
656 | will be done. | |
71bfa161 JA |
657 | |
658 | end_fsync=bool If true, fsync file contents when the job exits. | |
659 | ||
ebb1415f JA |
660 | fsync_on_close=bool If true, fio will fsync() a dirty file on close. |
661 | This differs from end_fsync in that it will happen on every | |
662 | file close, not just at the end of the job. | |
663 | ||
71bfa161 JA |
664 | rwmixread=int How large a percentage of the mix should be reads. |
665 | ||
666 | rwmixwrite=int How large a percentage of the mix should be writes. If both | |
667 | rwmixread and rwmixwrite is given and the values do not add | |
668 | up to 100%, the latter of the two will be used to override | |
c35dd7a6 JA |
669 | the first. This may interfere with a given rate setting, |
670 | if fio is asked to limit reads or writes to a certain rate. | |
671 | If that is the case, then the distribution may be skewed. | |
71bfa161 | 672 | |
bb8895e0 JA |
673 | norandommap Normally fio will cover every block of the file when doing |
674 | random IO. If this option is given, fio will just get a | |
675 | new random offset without looking at past io history. This | |
676 | means that some blocks may not be read or written, and that | |
677 | some blocks may be read/written more than once. This option | |
8347239a JA |
678 | is mutually exclusive with verify= if and only if multiple |
679 | blocksizes (via bsrange=) are used, since fio only tracks | |
680 | complete rewrites of blocks. | |
bb8895e0 | 681 | |
0408c206 JA |
682 | softrandommap=bool See norandommap. If fio runs with the random block map |
683 | enabled and it fails to allocate the map, if this option is | |
684 | set it will continue without a random block map. As coverage | |
685 | will not be as complete as with random maps, this option is | |
2b386d25 JA |
686 | disabled by default. |
687 | ||
71bfa161 JA |
688 | nice=int Run the job with the given nice value. See man nice(2). |
689 | ||
690 | prio=int Set the io priority value of this job. Linux limits us to | |
691 | a positive value between 0 and 7, with 0 being the highest. | |
692 | See man ionice(1). | |
693 | ||
694 | prioclass=int Set the io priority class. See man ionice(1). | |
695 | ||
696 | thinktime=int Stall the job x microseconds after an io has completed before | |
697 | issuing the next. May be used to simulate processing being | |
48097d5c JA |
698 | done by an application. See thinktime_blocks and |
699 | thinktime_spin. | |
700 | ||
701 | thinktime_spin=int | |
702 | Only valid if thinktime is set - pretend to spend CPU time | |
703 | doing something with the data received, before falling back | |
704 | to sleeping for the rest of the period specified by | |
705 | thinktime. | |
9c1f7434 JA |
706 | |
707 | thinktime_blocks | |
708 | Only valid if thinktime is set - control how many blocks | |
709 | to issue, before waiting 'thinktime' usecs. If not set, | |
710 | defaults to 1 which will make fio wait 'thinktime' usecs | |
711 | after every block. | |
71bfa161 | 712 | |
581e7141 | 713 | rate=int Cap the bandwidth used by this job. The number is in bytes/sec, |
b09da8fa | 714 | the normal suffix rules apply. You can use rate=500k to limit |
581e7141 JA |
715 | reads and writes to 500k each, or you can specify read and |
716 | writes separately. Using rate=1m,500k would limit reads to | |
717 | 1MB/sec and writes to 500KB/sec. Capping only reads or | |
718 | writes can be done with rate=,500k or rate=500k,. The former | |
719 | will only limit writes (to 500KB/sec), the latter will only | |
720 | limit reads. | |
71bfa161 JA |
721 | |
722 | ratemin=int Tell fio to do whatever it can to maintain at least this | |
4e991c23 | 723 | bandwidth. Failing to meet this requirement, will cause |
581e7141 JA |
724 | the job to exit. The same format as rate is used for |
725 | read vs write separation. | |
4e991c23 JA |
726 | |
727 | rate_iops=int Cap the bandwidth to this number of IOPS. Basically the same | |
728 | as rate, just specified independently of bandwidth. If the | |
729 | job is given a block size range instead of a fixed value, | |
581e7141 JA |
730 | the smallest block size is used as the metric. The same format |
731 | as rate is used for read vs write seperation. | |
4e991c23 JA |
732 | |
733 | rate_iops_min=int If fio doesn't meet this rate of IO, it will cause | |
581e7141 JA |
734 | the job to exit. The same format as rate is used for read vs |
735 | write seperation. | |
71bfa161 JA |
736 | |
737 | ratecycle=int Average bandwidth for 'rate' and 'ratemin' over this number | |
6c219763 | 738 | of milliseconds. |
71bfa161 JA |
739 | |
740 | cpumask=int Set the CPU affinity of this job. The parameter given is a | |
a08bc17f JA |
741 | bitmask of allowed CPU's the job may run on. So if you want |
742 | the allowed CPUs to be 1 and 5, you would pass the decimal | |
743 | value of (1 << 1 | 1 << 5), or 34. See man | |
7dbb6eba | 744 | sched_setaffinity(2). This may not work on all supported |
b0ea08ce JA |
745 | operating systems or kernel versions. This option doesn't |
746 | work well for a higher CPU count than what you can store in | |
747 | an integer mask, so it can only control cpus 1-32. For | |
748 | boxes with larger CPU counts, use cpus_allowed. | |
71bfa161 | 749 | |
d2e268b0 JA |
750 | cpus_allowed=str Controls the same options as cpumask, but it allows a text |
751 | setting of the permitted CPUs instead. So to use CPUs 1 and | |
62a7273d JA |
752 | 5, you would specify cpus_allowed=1,5. This options also |
753 | allows a range of CPUs. Say you wanted a binding to CPUs | |
754 | 1, 5, and 8-15, you would set cpus_allowed=1,5,8-15. | |
d2e268b0 | 755 | |
e417fd66 | 756 | startdelay=time Start this job the specified number of seconds after fio |
71bfa161 JA |
757 | has started. Only useful if the job file contains several |
758 | jobs, and you want to delay starting some jobs to a certain | |
759 | time. | |
760 | ||
e417fd66 | 761 | runtime=time Tell fio to terminate processing after the specified number |
71bfa161 JA |
762 | of seconds. It can be quite hard to determine for how long |
763 | a specified job will run, so this parameter is handy to | |
764 | cap the total runtime to a given time. | |
765 | ||
cf4464ca | 766 | time_based If set, fio will run for the duration of the runtime |
bf9a3edb | 767 | specified even if the file(s) are completely read or |
cf4464ca JA |
768 | written. It will simply loop over the same workload |
769 | as many times as the runtime allows. | |
770 | ||
e417fd66 | 771 | ramp_time=time If set, fio will run the specified workload for this amount |
721938ae JA |
772 | of time before logging any performance numbers. Useful for |
773 | letting performance settle before logging results, thus | |
b29ee5b3 JA |
774 | minimizing the runtime required for stable results. Note |
775 | that the ramp_time is considered lead in time for a job, | |
776 | thus it will increase the total runtime if a special timeout | |
777 | or runtime is specified. | |
721938ae | 778 | |
71bfa161 JA |
779 | invalidate=bool Invalidate the buffer/page cache parts for this file prior |
780 | to starting io. Defaults to true. | |
781 | ||
782 | sync=bool Use sync io for buffered writes. For the majority of the | |
783 | io engines, this means using O_SYNC. | |
784 | ||
d3aad8f2 | 785 | iomem=str |
71bfa161 JA |
786 | mem=str Fio can use various types of memory as the io unit buffer. |
787 | The allowed values are: | |
788 | ||
789 | malloc Use memory from malloc(3) as the buffers. | |
790 | ||
791 | shm Use shared memory as the buffers. Allocated | |
792 | through shmget(2). | |
793 | ||
74b025b0 JA |
794 | shmhuge Same as shm, but use huge pages as backing. |
795 | ||
313cb206 JA |
796 | mmap Use mmap to allocate buffers. May either be |
797 | anonymous memory, or can be file backed if | |
798 | a filename is given after the option. The | |
799 | format is mem=mmap:/path/to/file. | |
71bfa161 | 800 | |
d0bdaf49 JA |
801 | mmaphuge Use a memory mapped huge file as the buffer |
802 | backing. Append filename after mmaphuge, ala | |
803 | mem=mmaphuge:/hugetlbfs/file | |
804 | ||
71bfa161 | 805 | The area allocated is a function of the maximum allowed |
5394ae5f JA |
806 | bs size for the job, multiplied by the io depth given. Note |
807 | that for shmhuge and mmaphuge to work, the system must have | |
808 | free huge pages allocated. This can normally be checked | |
809 | and set by reading/writing /proc/sys/vm/nr_hugepages on a | |
b22989b9 | 810 | Linux system. Fio assumes a huge page is 4MB in size. So |
5394ae5f JA |
811 | to calculate the number of huge pages you need for a given |
812 | job file, add up the io depth of all jobs (normally one unless | |
813 | iodepth= is used) and multiply by the maximum bs set. Then | |
814 | divide that number by the huge page size. You can see the | |
815 | size of the huge pages in /proc/meminfo. If no huge pages | |
816 | are allocated by having a non-zero number in nr_hugepages, | |
56bb17f2 | 817 | using mmaphuge or shmhuge will fail. Also see hugepage-size. |
5394ae5f JA |
818 | |
819 | mmaphuge also needs to have hugetlbfs mounted and the file | |
820 | location should point there. So if it's mounted in /huge, | |
821 | you would use mem=mmaphuge:/huge/somefile. | |
71bfa161 | 822 | |
d529ee19 JA |
823 | iomem_align=int This indiciates the memory alignment of the IO memory buffers. |
824 | Note that the given alignment is applied to the first IO unit | |
825 | buffer, if using iodepth the alignment of the following buffers | |
826 | are given by the bs used. In other words, if using a bs that is | |
827 | a multiple of the page sized in the system, all buffers will | |
828 | be aligned to this value. If using a bs that is not page | |
829 | aligned, the alignment of subsequent IO memory buffers is the | |
830 | sum of the iomem_align and bs used. | |
831 | ||
f7fa2653 | 832 | hugepage-size=int |
56bb17f2 | 833 | Defines the size of a huge page. Must at least be equal |
b22989b9 | 834 | to the system setting, see /proc/meminfo. Defaults to 4MB. |
c51074e7 JA |
835 | Should probably always be a multiple of megabytes, so using |
836 | hugepage-size=Xm is the preferred way to set this to avoid | |
837 | setting a non-pow-2 bad value. | |
56bb17f2 | 838 | |
71bfa161 JA |
839 | exitall When one job finishes, terminate the rest. The default is |
840 | to wait for each job to finish, sometimes that is not the | |
841 | desired action. | |
842 | ||
843 | bwavgtime=int Average the calculated bandwidth over the given time. Value | |
6c219763 | 844 | is specified in milliseconds. |
71bfa161 JA |
845 | |
846 | create_serialize=bool If true, serialize the file creating for the jobs. | |
847 | This may be handy to avoid interleaving of data | |
848 | files, which may greatly depend on the filesystem | |
849 | used and even the number of processors in the system. | |
850 | ||
851 | create_fsync=bool fsync the data file after creation. This is the | |
852 | default. | |
853 | ||
814452bd JA |
854 | create_on_open=bool Don't pre-setup the files for IO, just create open() |
855 | when it's time to do IO to that file. | |
856 | ||
afad68f7 | 857 | pre_read=bool If this is given, files will be pre-read into memory before |
34f1c044 JA |
858 | starting the given IO operation. This will also clear |
859 | the 'invalidate' flag, since it is pointless to pre-read | |
9c0d2241 JA |
860 | and then drop the cache. This will only work for IO engines |
861 | that are seekable, since they allow you to read the same data | |
862 | multiple times. Thus it will not work on eg network or splice | |
863 | IO. | |
afad68f7 | 864 | |
e545a6ce | 865 | unlink=bool Unlink the job files when done. Not the default, as repeated |
bf9a3edb JA |
866 | runs of that job would then waste time recreating the file |
867 | set again and again. | |
71bfa161 JA |
868 | |
869 | loops=int Run the specified number of iterations of this job. Used | |
870 | to repeat the same workload a given number of times. Defaults | |
871 | to 1. | |
872 | ||
68e1f29a | 873 | do_verify=bool Run the verify phase after a write phase. Only makes sense if |
e84c73a8 SL |
874 | verify is set. Defaults to 1. |
875 | ||
71bfa161 JA |
876 | verify=str If writing to a file, fio can verify the file contents |
877 | after each iteration of the job. The allowed values are: | |
878 | ||
879 | md5 Use an md5 sum of the data area and store | |
880 | it in the header of each block. | |
881 | ||
17dc34df JA |
882 | crc64 Use an experimental crc64 sum of the data |
883 | area and store it in the header of each | |
884 | block. | |
885 | ||
bac39e0e JA |
886 | crc32c Use a crc32c sum of the data area and store |
887 | it in the header of each block. | |
888 | ||
3845591f | 889 | crc32c-intel Use hardware assisted crc32c calcuation |
0539d758 JA |
890 | provided on SSE4.2 enabled processors. Falls |
891 | back to regular software crc32c, if not | |
892 | supported by the system. | |
3845591f | 893 | |
71bfa161 JA |
894 | crc32 Use a crc32 sum of the data area and store |
895 | it in the header of each block. | |
896 | ||
969f7ed3 JA |
897 | crc16 Use a crc16 sum of the data area and store |
898 | it in the header of each block. | |
899 | ||
17dc34df JA |
900 | crc7 Use a crc7 sum of the data area and store |
901 | it in the header of each block. | |
902 | ||
cd14cc10 JA |
903 | sha512 Use sha512 as the checksum function. |
904 | ||
905 | sha256 Use sha256 as the checksum function. | |
906 | ||
7c353ceb JA |
907 | sha1 Use optimized sha1 as the checksum function. |
908 | ||
7437ee87 SL |
909 | meta Write extra information about each io |
910 | (timestamp, block number etc.). The block | |
996093bb | 911 | number is verified. See also verify_pattern. |
7437ee87 | 912 | |
36690c9b JA |
913 | null Only pretend to verify. Useful for testing |
914 | internals with ioengine=null, not for much | |
915 | else. | |
916 | ||
6c219763 | 917 | This option can be used for repeated burn-in tests of a |
71bfa161 | 918 | system to make sure that the written data is also |
b892dc08 JA |
919 | correctly read back. If the data direction given is |
920 | a read or random read, fio will assume that it should | |
921 | verify a previously written file. If the data direction | |
922 | includes any form of write, the verify will be of the | |
923 | newly written data. | |
71bfa161 | 924 | |
160b966d JA |
925 | verifysort=bool If set, fio will sort written verify blocks when it deems |
926 | it faster to read them back in a sorted manner. This is | |
927 | often the case when overwriting an existing file, since | |
928 | the blocks are already laid out in the file system. You | |
929 | can ignore this option unless doing huge amounts of really | |
930 | fast IO where the red-black tree sorting CPU time becomes | |
931 | significant. | |
3f9f4e26 | 932 | |
f7fa2653 | 933 | verify_offset=int Swap the verification header with data somewhere else |
546a9142 SL |
934 | in the block before writing. Its swapped back before |
935 | verifying. | |
936 | ||
f7fa2653 | 937 | verify_interval=int Write the verification header at a finer granularity |
3f9f4e26 SL |
938 | than the blocksize. It will be written for chunks the |
939 | size of header_interval. blocksize should divide this | |
940 | evenly. | |
90059d65 | 941 | |
0e92f873 | 942 | verify_pattern=str If set, fio will fill the io buffers with this |
e28218f3 SL |
943 | pattern. Fio defaults to filling with totally random |
944 | bytes, but sometimes it's interesting to fill with a known | |
945 | pattern for io verification purposes. Depending on the | |
946 | width of the pattern, fio will fill 1/2/3/4 bytes of the | |
0e92f873 RR |
947 | buffer at the time(it can be either a decimal or a hex number). |
948 | The verify_pattern if larger than a 32-bit quantity has to | |
996093bb JA |
949 | be a hex number that starts with either "0x" or "0X". Use |
950 | with verify=meta. | |
e28218f3 | 951 | |
68e1f29a | 952 | verify_fatal=bool Normally fio will keep checking the entire contents |
a12a3b4d JA |
953 | before quitting on a block verification failure. If this |
954 | option is set, fio will exit the job on the first observed | |
955 | failure. | |
e8462bd8 | 956 | |
b463e936 JA |
957 | verify_dump=bool If set, dump the contents of both the original data |
958 | block and the data block we read off disk to files. This | |
959 | allows later analysis to inspect just what kind of data | |
960 | corruption occurred. On by default. | |
961 | ||
e8462bd8 JA |
962 | verify_async=int Fio will normally verify IO inline from the submitting |
963 | thread. This option takes an integer describing how many | |
964 | async offload threads to create for IO verification instead, | |
965 | causing fio to offload the duty of verifying IO contents | |
c85c324c JA |
966 | to one or more separate threads. If using this offload |
967 | option, even sync IO engines can benefit from using an | |
968 | iodepth setting higher than 1, as it allows them to have | |
969 | IO in flight while verifies are running. | |
e8462bd8 JA |
970 | |
971 | verify_async_cpus=str Tell fio to set the given CPU affinity on the | |
972 | async IO verification threads. See cpus_allowed for the | |
973 | format used. | |
6f87418f JA |
974 | |
975 | verify_backlog=int Fio will normally verify the written contents of a | |
976 | job that utilizes verify once that job has completed. In | |
977 | other words, everything is written then everything is read | |
978 | back and verified. You may want to verify continually | |
979 | instead for a variety of reasons. Fio stores the meta data | |
980 | associated with an IO block in memory, so for large | |
981 | verify workloads, quite a bit of memory would be used up | |
982 | holding this meta data. If this option is enabled, fio | |
f42195a3 JA |
983 | will write only N blocks before verifying these blocks. |
984 | ||
6f87418f JA |
985 | will verify the previously written blocks before continuing |
986 | to write new ones. | |
987 | ||
988 | verify_backlog_batch=int Control how many blocks fio will verify | |
989 | if verify_backlog is set. If not set, will default to | |
990 | the value of verify_backlog (meaning the entire queue | |
f42195a3 JA |
991 | is read back and verified). If verify_backlog_batch is |
992 | less than verify_backlog then not all blocks will be verified, | |
993 | if verify_backlog_batch is larger than verify_backlog, some | |
994 | blocks will be verified more than once. | |
160b966d | 995 | |
d392365e JA |
996 | stonewall |
997 | wait_for_previous Wait for preceeding jobs in the job file to exit, before | |
71bfa161 | 998 | starting this one. Can be used to insert serialization |
b3d62a75 JA |
999 | points in the job file. A stone wall also implies starting |
1000 | a new reporting group. | |
1001 | ||
1002 | new_group Start a new reporting group. If this option isn't given, | |
1003 | jobs in a file will be part of the same reporting group | |
bf9a3edb | 1004 | unless separated by a stone wall (or if it's a group |
b3d62a75 | 1005 | by itself, with the numjobs option). |
71bfa161 JA |
1006 | |
1007 | numjobs=int Create the specified number of clones of this job. May be | |
1008 | used to setup a larger number of threads/processes doing | |
fa28c85a JA |
1009 | the same thing. We regard that grouping of jobs as a |
1010 | specific group. | |
1011 | ||
1012 | group_reporting If 'numjobs' is set, it may be interesting to display | |
1013 | statistics for the group as a whole instead of for each | |
1014 | individual job. This is especially true of 'numjobs' is | |
1015 | large, looking at individual thread/process output quickly | |
1016 | becomes unwieldy. If 'group_reporting' is specified, fio | |
1017 | will show the final report per-group instead of per-job. | |
71bfa161 JA |
1018 | |
1019 | thread fio defaults to forking jobs, however if this option is | |
1020 | given, fio will use pthread_create(3) to create threads | |
1021 | instead. | |
1022 | ||
f7fa2653 | 1023 | zonesize=int Divide a file into zones of the specified size. See zoneskip. |
71bfa161 | 1024 | |
f7fa2653 | 1025 | zoneskip=int Skip the specified number of bytes when zonesize data has |
71bfa161 JA |
1026 | been read. The two zone options can be used to only do |
1027 | io on zones of a file. | |
1028 | ||
076efc7c | 1029 | write_iolog=str Write the issued io patterns to the specified file. See |
5b42a488 SH |
1030 | read_iolog. Specify a separate file for each job, otherwise |
1031 | the iologs will be interspersed and the file may be corrupt. | |
71bfa161 | 1032 | |
076efc7c | 1033 | read_iolog=str Open an iolog with the specified file name and replay the |
71bfa161 | 1034 | io patterns it contains. This can be used to store a |
6df8adaa JA |
1035 | workload and replay it sometime later. The iolog given |
1036 | may also be a blktrace binary file, which allows fio | |
1037 | to replay a workload captured by blktrace. See blktrace | |
1038 | for how to capture such logging data. For blktrace replay, | |
1039 | the file needs to be turned into a blkparse binary data | |
ea3e51c3 | 1040 | file first (blkparse <device> -o /dev/null -d file_for_fio.bin). |
64bbb865 DN |
1041 | |
1042 | replay_no_stall=int When replaying I/O with read_iolog the default behavior | |
62776229 JA |
1043 | is to attempt to respect the time stamps within the log and |
1044 | replay them with the appropriate delay between IOPS. By | |
1045 | setting this variable fio will not respect the timestamps and | |
1046 | attempt to replay them as fast as possible while still | |
1047 | respecting ordering. The result is the same I/O pattern to a | |
1048 | given device, but different timings. | |
71bfa161 | 1049 | |
d1c46c04 DN |
1050 | replay_redirect=str While replaying I/O patterns using read_iolog the |
1051 | default behavior is to replay the IOPS onto the major/minor | |
1052 | device that each IOP was recorded from. This is sometimes | |
1053 | undesireable because on a different machine those major/minor | |
1054 | numbers can map to a different device. Changing hardware on | |
1055 | the same system can also result in a different major/minor | |
1056 | mapping. Replay_redirect causes all IOPS to be replayed onto | |
1057 | the single specified device regardless of the device it was | |
1058 | recorded from. i.e. replay_redirect=/dev/sdc would cause all | |
1059 | IO in the blktrace to be replayed onto /dev/sdc. This means | |
1060 | multiple devices will be replayed onto a single, if the trace | |
1061 | contains multiple devices. If you want multiple devices to be | |
1062 | replayed concurrently to multiple redirected devices you must | |
1063 | blkparse your trace into separate traces and replay them with | |
1064 | independent fio invocations. Unfortuantely this also breaks | |
1065 | the strict time ordering between multiple device accesses. | |
1066 | ||
e3cedca7 | 1067 | write_bw_log=str If given, write a bandwidth log of the jobs in this job |
71bfa161 | 1068 | file. Can be used to store data of the bandwidth of the |
e0da9bc2 JA |
1069 | jobs in their lifetime. The included fio_generate_plots |
1070 | script uses gnuplot to turn these text files into nice | |
e3cedca7 JA |
1071 | graphs. See write_log_log for behaviour of given |
1072 | filename. For this option, the postfix is _bw.log. | |
71bfa161 | 1073 | |
e3cedca7 | 1074 | write_lat_log=str Same as write_bw_log, except that this option stores io |
02af0988 JA |
1075 | submission, completion, and total latencies instead. If no |
1076 | filename is given with this option, the default filename of | |
1077 | "jobname_type.log" is used. Even if the filename is given, | |
1078 | fio will still append the type of log. So if one specifies | |
e3cedca7 JA |
1079 | |
1080 | write_lat_log=foo | |
1081 | ||
02af0988 JA |
1082 | The actual log names will be foo_slat.log, foo_slat.log, |
1083 | and foo_lat.log. This helps fio_generate_plot fine the logs | |
1084 | automatically. | |
71bfa161 | 1085 | |
f7fa2653 | 1086 | lockmem=int Pin down the specified amount of memory with mlock(2). Can |
71bfa161 JA |
1087 | potentially be used instead of removing memory or booting |
1088 | with less memory to simulate a smaller amount of memory. | |
1089 | ||
1090 | exec_prerun=str Before running this job, issue the command specified | |
1091 | through system(3). | |
1092 | ||
1093 | exec_postrun=str After the job completes, issue the command specified | |
1094 | though system(3). | |
1095 | ||
1096 | ioscheduler=str Attempt to switch the device hosting the file to the specified | |
1097 | io scheduler before running. | |
1098 | ||
1099 | cpuload=int If the job is a CPU cycle eater, attempt to use the specified | |
1100 | percentage of CPU cycles. | |
1101 | ||
1102 | cpuchunks=int If the job is a CPU cycle eater, split the load into | |
26eca2db | 1103 | cycles of the given time. In microseconds. |
71bfa161 | 1104 | |
0a839f30 JA |
1105 | disk_util=bool Generate disk utilization statistics, if the platform |
1106 | supports it. Defaults to on. | |
1107 | ||
02af0988 | 1108 | disable_lat=bool Disable measurements of total latency numbers. Useful |
9520ebb9 JA |
1109 | only for cutting back the number of calls to gettimeofday, |
1110 | as that does impact performance at really high IOPS rates. | |
1111 | Note that to really get rid of a large amount of these | |
1112 | calls, this option must be used with disable_slat and | |
1113 | disable_bw as well. | |
1114 | ||
02af0988 JA |
1115 | disable_clat=bool Disable measurements of completion latency numbers. See |
1116 | disable_lat. | |
1117 | ||
9520ebb9 | 1118 | disable_slat=bool Disable measurements of submission latency numbers. See |
02af0988 | 1119 | disable_slat. |
9520ebb9 JA |
1120 | |
1121 | disable_bw=bool Disable measurements of throughput/bandwidth numbers. See | |
02af0988 | 1122 | disable_lat. |
9520ebb9 | 1123 | |
83349190 YH |
1124 | clat_percentiles=bool Enable the reporting of percentiles of |
1125 | completion latencies. | |
1126 | ||
1127 | percentile_list=float_list Overwrite the default list of percentiles | |
1128 | for completion latencies. Each number is a floating | |
1129 | number in the range (0,100], and the maximum length of | |
1130 | the list is 20. Use ':' to separate the numbers, and | |
1131 | list the numbers in ascending order. For example, | |
1132 | --percentile_list=99.5:99.9 will cause fio to report | |
1133 | the values of completion latency below which 99.5% and | |
1134 | 99.9% of the observed latencies fell, respectively. | |
1135 | ||
993bf48b JA |
1136 | gtod_reduce=bool Enable all of the gettimeofday() reducing options |
1137 | (disable_clat, disable_slat, disable_bw) plus reduce | |
1138 | precision of the timeout somewhat to really shrink | |
1139 | the gettimeofday() call count. With this option enabled, | |
1140 | we only do about 0.4% of the gtod() calls we would have | |
1141 | done if all time keeping was enabled. | |
1142 | ||
be4ecfdf JA |
1143 | gtod_cpu=int Sometimes it's cheaper to dedicate a single thread of |
1144 | execution to just getting the current time. Fio (and | |
1145 | databases, for instance) are very intensive on gettimeofday() | |
1146 | calls. With this option, you can set one CPU aside for | |
1147 | doing nothing but logging current time to a shared memory | |
1148 | location. Then the other threads/processes that run IO | |
1149 | workloads need only copy that segment, instead of entering | |
1150 | the kernel with a gettimeofday() call. The CPU set aside | |
1151 | for doing these time calls will be excluded from other | |
1152 | uses. Fio will manually clear it from the CPU mask of other | |
1153 | jobs. | |
a696fa2a | 1154 | |
f2bba182 RR |
1155 | continue_on_error=bool Normally fio will exit the job on the first observed |
1156 | failure. If this option is set, fio will continue the job when | |
1157 | there is a 'non-fatal error' (EIO or EILSEQ) until the runtime | |
1158 | is exceeded or the I/O size specified is completed. If this | |
1159 | option is used, there are two more stats that are appended, | |
1160 | the total error count and the first error. The error field | |
1161 | given in the stats is the first error that was hit during the | |
1162 | run. | |
be4ecfdf | 1163 | |
6adb38a1 JA |
1164 | cgroup=str Add job to this control group. If it doesn't exist, it will |
1165 | be created. The system must have a mounted cgroup blkio | |
1166 | mount point for this to work. If your system doesn't have it | |
1167 | mounted, you can do so with: | |
a696fa2a JA |
1168 | |
1169 | # mount -t cgroup -o blkio none /cgroup | |
1170 | ||
a696fa2a JA |
1171 | cgroup_weight=int Set the weight of the cgroup to this value. See |
1172 | the documentation that comes with the kernel, allowed values | |
1173 | are in the range of 100..1000. | |
71bfa161 | 1174 | |
7de87099 VG |
1175 | cgroup_nodelete=bool Normally fio will delete the cgroups it has created after |
1176 | the job completion. To override this behavior and to leave | |
1177 | cgroups around after the job completion, set cgroup_nodelete=1. | |
1178 | This can be useful if one wants to inspect various cgroup | |
1179 | files after job completion. Default: false | |
1180 | ||
e0b0d892 JA |
1181 | uid=int Instead of running as the invoking user, set the user ID to |
1182 | this value before the thread/process does any work. | |
1183 | ||
1184 | gid=int Set group ID, see uid. | |
1185 | ||
71bfa161 JA |
1186 | 6.0 Interpreting the output |
1187 | --------------------------- | |
1188 | ||
1189 | fio spits out a lot of output. While running, fio will display the | |
1190 | status of the jobs created. An example of that would be: | |
1191 | ||
73c8b082 | 1192 | Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s] |
71bfa161 JA |
1193 | |
1194 | The characters inside the square brackets denote the current status of | |
1195 | each thread. The possible values (in typical life cycle order) are: | |
1196 | ||
1197 | Idle Run | |
1198 | ---- --- | |
1199 | P Thread setup, but not started. | |
1200 | C Thread created. | |
1201 | I Thread initialized, waiting. | |
b0f65863 | 1202 | p Thread running pre-reading file(s). |
71bfa161 JA |
1203 | R Running, doing sequential reads. |
1204 | r Running, doing random reads. | |
1205 | W Running, doing sequential writes. | |
1206 | w Running, doing random writes. | |
1207 | M Running, doing mixed sequential reads/writes. | |
1208 | m Running, doing mixed random reads/writes. | |
1209 | F Running, currently waiting for fsync() | |
fc6bd43c | 1210 | V Running, doing verification of written data. |
71bfa161 JA |
1211 | E Thread exited, not reaped by main thread yet. |
1212 | _ Thread reaped. | |
1213 | ||
1214 | The other values are fairly self explanatory - number of threads | |
c9f60304 JA |
1215 | currently running and doing io, rate of io since last check (read speed |
1216 | listed first, then write speed), and the estimated completion percentage | |
1217 | and time for the running group. It's impossible to estimate runtime of | |
1218 | the following groups (if any). | |
71bfa161 JA |
1219 | |
1220 | When fio is done (or interrupted by ctrl-c), it will show the data for | |
1221 | each thread, group of threads, and disks in that order. For each data | |
1222 | direction, the output looks like: | |
1223 | ||
1224 | Client1 (g=0): err= 0: | |
35649e58 | 1225 | write: io= 32MB, bw= 666KB/s, iops=89 , runt= 50320msec |
6104ddb6 JA |
1226 | slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92 |
1227 | clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82 | |
b22989b9 | 1228 | bw (KB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68 |
e7823a94 | 1229 | cpu : usr=1.49%, sys=0.25%, ctx=7969, majf=0, minf=17 |
71619dc2 | 1230 | IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0% |
838bc709 JA |
1231 | submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% |
1232 | complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% | |
30061b97 | 1233 | issued r/w: total=0/32768, short=0/0 |
8abdce66 JA |
1234 | lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%, |
1235 | lat (msec): 250=15.2%, 500=0.0%, 750=0.0%, 1000=0.0%, >=2048=0.0% | |
71bfa161 JA |
1236 | |
1237 | The client number is printed, along with the group id and error of that | |
1238 | thread. Below is the io statistics, here for writes. In the order listed, | |
1239 | they denote: | |
1240 | ||
1241 | io= Number of megabytes io performed | |
1242 | bw= Average bandwidth rate | |
35649e58 | 1243 | iops= Average IOs performed per second |
71bfa161 | 1244 | runt= The runtime of that thread |
72fbda2a | 1245 | slat= Submission latency (avg being the average, stdev being the |
71bfa161 JA |
1246 | standard deviation). This is the time it took to submit |
1247 | the io. For sync io, the slat is really the completion | |
8a35c71e | 1248 | latency, since queue/complete is one operation there. This |
bf9a3edb | 1249 | value can be in milliseconds or microseconds, fio will choose |
8a35c71e | 1250 | the most appropriate base and print that. In the example |
bf9a3edb | 1251 | above, milliseconds is the best scale. |
71bfa161 JA |
1252 | clat= Completion latency. Same names as slat, this denotes the |
1253 | time from submission to completion of the io pieces. For | |
1254 | sync io, clat will usually be equal (or very close) to 0, | |
1255 | as the time from submit to complete is basically just | |
1256 | CPU time (io has already been done, see slat explanation). | |
1257 | bw= Bandwidth. Same names as the xlat stats, but also includes | |
1258 | an approximate percentage of total aggregate bandwidth | |
1259 | this thread received in this group. This last value is | |
1260 | only really useful if the threads in this group are on the | |
1261 | same disk, since they are then competing for disk access. | |
1262 | cpu= CPU usage. User and system time, along with the number | |
e7823a94 JA |
1263 | of context switches this thread went through, usage of |
1264 | system and user time, and finally the number of major | |
1265 | and minor page faults. | |
71619dc2 JA |
1266 | IO depths= The distribution of io depths over the job life time. The |
1267 | numbers are divided into powers of 2, so for example the | |
1268 | 16= entries includes depths up to that value but higher | |
1269 | than the previous entry. In other words, it covers the | |
1270 | range from 16 to 31. | |
838bc709 JA |
1271 | IO submit= How many pieces of IO were submitting in a single submit |
1272 | call. Each entry denotes that amount and below, until | |
1273 | the previous entry - eg, 8=100% mean that we submitted | |
1274 | anywhere in between 5-8 ios per submit call. | |
1275 | IO complete= Like the above submit number, but for completions instead. | |
30061b97 JA |
1276 | IO issued= The number of read/write requests issued, and how many |
1277 | of them were short. | |
ec118304 JA |
1278 | IO latencies= The distribution of IO completion latencies. This is the |
1279 | time from when IO leaves fio and when it gets completed. | |
1280 | The numbers follow the same pattern as the IO depths, | |
1281 | meaning that 2=1.6% means that 1.6% of the IO completed | |
8abdce66 JA |
1282 | within 2 msecs, 20=12.8% means that 12.8% of the IO |
1283 | took more than 10 msecs, but less than (or equal to) 20 msecs. | |
71bfa161 JA |
1284 | |
1285 | After each client has been listed, the group statistics are printed. They | |
1286 | will look like this: | |
1287 | ||
1288 | Run status group 0 (all jobs): | |
b22989b9 JA |
1289 | READ: io=64MB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec |
1290 | WRITE: io=64MB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec | |
71bfa161 JA |
1291 | |
1292 | For each data direction, it prints: | |
1293 | ||
1294 | io= Number of megabytes io performed. | |
1295 | aggrb= Aggregate bandwidth of threads in this group. | |
1296 | minb= The minimum average bandwidth a thread saw. | |
1297 | maxb= The maximum average bandwidth a thread saw. | |
1298 | mint= The smallest runtime of the threads in that group. | |
1299 | maxt= The longest runtime of the threads in that group. | |
1300 | ||
1301 | And finally, the disk statistics are printed. They will look like this: | |
1302 | ||
1303 | Disk stats (read/write): | |
1304 | sda: ios=16398/16511, merge=30/162, ticks=6853/819634, in_queue=826487, util=100.00% | |
1305 | ||
1306 | Each value is printed for both reads and writes, with reads first. The | |
1307 | numbers denote: | |
1308 | ||
1309 | ios= Number of ios performed by all groups. | |
1310 | merge= Number of merges io the io scheduler. | |
1311 | ticks= Number of ticks we kept the disk busy. | |
1312 | io_queue= Total time spent in the disk queue. | |
1313 | util= The disk utilization. A value of 100% means we kept the disk | |
1314 | busy constantly, 50% would be a disk idling half of the time. | |
1315 | ||
1316 | ||
1317 | 7.0 Terse output | |
1318 | ---------------- | |
1319 | ||
1320 | For scripted usage where you typically want to generate tables or graphs | |
6af019c9 | 1321 | of the results, fio can output the results in a semicolon separated format. |
71bfa161 JA |
1322 | The format is one long line of values, such as: |
1323 | ||
562c2d2f DN |
1324 | 2;card0;0;0;7139336;121836;60004;1;10109;27.932460;116.933948;220;126861;3495.446807;1085.368601;226;126864;3523.635629;1089.012448;24063;99944;50.275485%;59818.274627;5540.657370;7155060;122104;60004;1;8338;29.086342;117.839068;388;128077;5032.488518;1234.785715;391;128085;5061.839412;1236.909129;23436;100928;50.287926%;59964.832030;5644.844189;14.595833%;19.394167%;123706;0;7313;0.1%;0.1%;0.1%;0.1%;0.1%;0.1%;100.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.02%;0.05%;0.16%;6.04%;40.40%;52.68%;0.64%;0.01%;0.00%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00% |
1325 | A description of this job goes here. | |
1326 | ||
1327 | The job description (if provided) follows on a second line. | |
71bfa161 | 1328 | |
525c2bfa JA |
1329 | To enable terse output, use the --minimal command line option. The first |
1330 | value is the version of the terse output format. If the output has to | |
1331 | be changed for some reason, this number will be incremented by 1 to | |
1332 | signify that change. | |
6820cb3b | 1333 | |
71bfa161 JA |
1334 | Split up, the format is as follows: |
1335 | ||
525c2bfa | 1336 | version, jobname, groupid, error |
71bfa161 | 1337 | READ status: |
b22989b9 | 1338 | KB IO, bandwidth (KB/sec), runtime (msec) |
71bfa161 JA |
1339 | Submission latency: min, max, mean, deviation |
1340 | Completion latency: min, max, mean, deviation | |
525c2bfa | 1341 | Total latency: min, max, mean, deviation |
6c219763 | 1342 | Bw: min, max, aggregate percentage of total, mean, deviation |
71bfa161 | 1343 | WRITE status: |
b22989b9 | 1344 | KB IO, bandwidth (KB/sec), runtime (msec) |
71bfa161 JA |
1345 | Submission latency: min, max, mean, deviation |
1346 | Completion latency: min, max, mean, deviation | |
525c2bfa | 1347 | Total latency: min, max, mean, deviation |
6c219763 | 1348 | Bw: min, max, aggregate percentage of total, mean, deviation |
046ee302 | 1349 | CPU usage: user, system, context switches, major faults, minor faults |
2270890c | 1350 | IO depths: <=1, 2, 4, 8, 16, 32, >=64 |
562c2d2f DN |
1351 | IO latencies microseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000 |
1352 | IO latencies milliseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, 2000, >=2000 | |
1353 | Additional Info (dependant on continue_on_error, default off): total # errors, first error code | |
1354 | ||
f42195a3 | 1355 | Additional Info (dependant on description being set): Text description |
25c8b9d7 PD |
1356 | |
1357 | ||
1358 | 8.0 Trace file format | |
1359 | --------------------- | |
1360 | There are two trace file format that you can encounter. The older (v1) format | |
1361 | is unsupported since version 1.20-rc3 (March 2008). It will still be described | |
1362 | below in case that you get an old trace and want to understand it. | |
1363 | ||
1364 | In any case the trace is a simple text file with a single action per line. | |
1365 | ||
1366 | ||
1367 | 8.1 Trace file format v1 | |
1368 | ------------------------ | |
1369 | Each line represents a single io action in the following format: | |
1370 | ||
1371 | rw, offset, length | |
1372 | ||
1373 | where rw=0/1 for read/write, and the offset and length entries being in bytes. | |
1374 | ||
1375 | This format is not supported in Fio versions => 1.20-rc3. | |
1376 | ||
1377 | ||
1378 | 8.2 Trace file format v2 | |
1379 | ------------------------ | |
1380 | The second version of the trace file format was added in Fio version 1.17. | |
1381 | It allows to access more then one file per trace and has a bigger set of | |
1382 | possible file actions. | |
1383 | ||
1384 | The first line of the trace file has to be: | |
1385 | ||
1386 | fio version 2 iolog | |
1387 | ||
1388 | Following this can be lines in two different formats, which are described below. | |
1389 | ||
1390 | The file management format: | |
1391 | ||
1392 | filename action | |
1393 | ||
1394 | The filename is given as an absolute path. The action can be one of these: | |
1395 | ||
1396 | add Add the given filename to the trace | |
1397 | open Open the file with the given filename. The filename has to have | |
1398 | been added with the add action before. | |
1399 | close Close the file with the given filename. The file has to have been | |
1400 | opened before. | |
1401 | ||
1402 | ||
1403 | The file io action format: | |
1404 | ||
1405 | filename action offset length | |
1406 | ||
1407 | The filename is given as an absolute path, and has to have been added and opened | |
1408 | before it can be used with this format. The offset and length are given in | |
1409 | bytes. The action can be one of these: | |
1410 | ||
1411 | wait Wait for 'offset' microseconds. Everything below 100 is discarded. | |
1412 | read Read 'length' bytes beginning from 'offset' | |
1413 | write Write 'length' bytes beginning from 'offset' | |
1414 | sync fsync() the file | |
1415 | datasync fdatasync() the file | |
1416 | trim trim the given file from the given 'offset' for 'length' bytes |