Revert "[media] rc: ir-rc5-decoder: Add encode capability"
authorDavid Härdeman <david@hardeman.nu>
Mon, 20 Jul 2015 19:16:51 +0000 (16:16 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Wed, 19 Aug 2015 10:03:09 +0000 (07:03 -0300)
This reverts commit a0466f15b4654cf1ac9e387d7c1a401eff494b4f.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/rc/ir-rc5-decoder.c

index 8939ebd7439198161935f573652f25babb438840..84fa6e9b59a1acd9360364fbd30ca0a4e00d3a56 100644 (file)
@@ -184,125 +184,9 @@ out:
        return -EINVAL;
 }
 
-static struct ir_raw_timings_manchester ir_rc5_timings = {
-       .leader                 = RC5_UNIT,
-       .pulse_space_start      = 0,
-       .clock                  = RC5_UNIT,
-       .trailer_space          = RC5_UNIT * 10,
-};
-
-static struct ir_raw_timings_manchester ir_rc5x_timings[2] = {
-       {
-               .leader                 = RC5_UNIT,
-               .pulse_space_start      = 0,
-               .clock                  = RC5_UNIT,
-               .trailer_space          = RC5X_SPACE,
-       },
-       {
-               .clock                  = RC5_UNIT,
-               .trailer_space          = RC5_UNIT * 10,
-       },
-};
-
-static struct ir_raw_timings_manchester ir_rc5_sz_timings = {
-       .leader                         = RC5_UNIT,
-       .pulse_space_start              = 0,
-       .clock                          = RC5_UNIT,
-       .trailer_space                  = RC5_UNIT * 10,
-};
-
-static int ir_rc5_validate_filter(const struct rc_scancode_filter *scancode,
-                                 unsigned int important_bits)
-{
-       /* all important bits of scancode should be set in mask */
-       if (~scancode->mask & important_bits)
-               return -EINVAL;
-       /* extra bits in mask should be zero in data */
-       if (scancode->mask & scancode->data & ~important_bits)
-               return -EINVAL;
-       return 0;
-}
-
-/**
- * ir_rc5_encode() - Encode a scancode as a stream of raw events
- *
- * @protocols: allowed protocols
- * @scancode:  scancode filter describing scancode (helps distinguish between
- *             protocol subtypes when scancode is ambiguous)
- * @events:    array of raw ir events to write into
- * @max:       maximum size of @events
- *
- * Returns:    The number of events written.
- *             -ENOBUFS if there isn't enough space in the array to fit the
- *             encoding. In this case all @max events will have been written.
- *             -EINVAL if the scancode is ambiguous or invalid.
- */
-static int ir_rc5_encode(u64 protocols,
-                        const struct rc_scancode_filter *scancode,
-                        struct ir_raw_event *events, unsigned int max)
-{
-       int ret;
-       struct ir_raw_event *e = events;
-       unsigned int data, xdata, command, commandx, system;
-
-       /* Detect protocol and convert scancode to raw data */
-       if (protocols & RC_BIT_RC5 &&
-           !ir_rc5_validate_filter(scancode, 0x1f7f)) {
-               /* decode scancode */
-               command  = (scancode->data & 0x003f) >> 0;
-               commandx = (scancode->data & 0x0040) >> 6;
-               system   = (scancode->data & 0x1f00) >> 8;
-               /* encode data */
-               data = !commandx << 12 | system << 6 | command;
-
-               /* Modulate the data */
-               ret = ir_raw_gen_manchester(&e, max, &ir_rc5_timings, RC5_NBITS,
-                                           data);
-               if (ret < 0)
-                       return ret;
-       } else if (protocols & RC_BIT_RC5X &&
-                  !ir_rc5_validate_filter(scancode, 0x1f7f3f)) {
-               /* decode scancode */
-               xdata    = (scancode->data & 0x00003f) >> 0;
-               command  = (scancode->data & 0x003f00) >> 8;
-               commandx = (scancode->data & 0x004000) >> 14;
-               system   = (scancode->data & 0x1f0000) >> 16;
-               /* commandx and system overlap, bits must match when encoded */
-               if (commandx == (system & 0x1))
-                       return -EINVAL;
-               /* encode data */
-               data = 1 << 18 | system << 12 | command << 6 | xdata;
-
-               /* Modulate the data */
-               ret = ir_raw_gen_manchester(&e, max, &ir_rc5x_timings[0],
-                                       CHECK_RC5X_NBITS,
-                                       data >> (RC5X_NBITS-CHECK_RC5X_NBITS));
-               if (ret < 0)
-                       return ret;
-               ret = ir_raw_gen_manchester(&e, max - (e - events),
-                                       &ir_rc5x_timings[1],
-                                       RC5X_NBITS - CHECK_RC5X_NBITS,
-                                       data);
-               if (ret < 0)
-                       return ret;
-       } else if (protocols & RC_BIT_RC5_SZ &&
-                  !ir_rc5_validate_filter(scancode, 0x2fff)) {
-               /* RC5-SZ scancode is raw enough for Manchester as it is */
-               ret = ir_raw_gen_manchester(&e, max, &ir_rc5_sz_timings,
-                                       RC5_SZ_NBITS, scancode->data & 0x2fff);
-               if (ret < 0)
-                       return ret;
-       } else {
-               return -EINVAL;
-       }
-
-       return e - events;
-}
-
 static struct ir_raw_handler rc5_handler = {
        .protocols      = RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ,
        .decode         = ir_rc5_decode,
-       .encode         = ir_rc5_encode,
 };
 
 static int __init ir_rc5_decode_init(void)