--- /dev/null
+ /*
+ * linux/arch/x86_64/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
+ * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
+ */
+
+ /*
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * Some of this is documented in Documentation/x86/entry_64.txt
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after an interrupt and after each system call.
+ *
+ * A note on terminology:
+ * - iret frame: Architecture defined interrupt frame from SS to RIP
+ * at the top of the kernel process stack.
+ *
+ * Some macro usage:
+ * - ENTRY/END Define functions in the symbol table.
+ * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
+ * - idtentry - Define exception entry points.
+ */
+
+ #include <linux/linkage.h>
+ #include <asm/segment.h>
+ #include <asm/cache.h>
+ #include <asm/errno.h>
+ #include "calling.h"
+ #include <asm/asm-offsets.h>
+ #include <asm/msr.h>
+ #include <asm/unistd.h>
+ #include <asm/thread_info.h>
+ #include <asm/hw_irq.h>
+ #include <asm/page_types.h>
+ #include <asm/irqflags.h>
+ #include <asm/paravirt.h>
+ #include <asm/percpu.h>
+ #include <asm/asm.h>
+ #include <asm/context_tracking.h>
+ #include <asm/smap.h>
+ #include <asm/pgtable_types.h>
+ #include <linux/err.h>
+
+ /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
+ #include <linux/elf-em.h>
+ #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+ #define __AUDIT_ARCH_64BIT 0x80000000
+ #define __AUDIT_ARCH_LE 0x40000000
+
+ .code64
+ .section .entry.text, "ax"
+
+
+ #ifdef CONFIG_PARAVIRT
+ ENTRY(native_usergs_sysret64)
+ swapgs
+ sysretq
+ ENDPROC(native_usergs_sysret64)
+ #endif /* CONFIG_PARAVIRT */
+
+
+ .macro TRACE_IRQS_IRETQ
+ #ifdef CONFIG_TRACE_IRQFLAGS
+ bt $9,EFLAGS(%rsp) /* interrupts off? */
+ jnc 1f
+ TRACE_IRQS_ON
+ 1:
+ #endif
+ .endm
+
+ /*
+ * When dynamic function tracer is enabled it will add a breakpoint
+ * to all locations that it is about to modify, sync CPUs, update
+ * all the code, sync CPUs, then remove the breakpoints. In this time
+ * if lockdep is enabled, it might jump back into the debug handler
+ * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
+ *
+ * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
+ * make sure the stack pointer does not get reset back to the top
+ * of the debug stack, and instead just reuses the current stack.
+ */
+ #if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
+
+ .macro TRACE_IRQS_OFF_DEBUG
+ call debug_stack_set_zero
+ TRACE_IRQS_OFF
+ call debug_stack_reset
+ .endm
+
+ .macro TRACE_IRQS_ON_DEBUG
+ call debug_stack_set_zero
+ TRACE_IRQS_ON
+ call debug_stack_reset
+ .endm
+
+ .macro TRACE_IRQS_IRETQ_DEBUG
+ bt $9,EFLAGS(%rsp) /* interrupts off? */
+ jnc 1f
+ TRACE_IRQS_ON_DEBUG
+ 1:
+ .endm
+
+ #else
+ # define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF
+ # define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON
+ # define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ
+ #endif
+
+ /*
+ * 64bit SYSCALL instruction entry. Up to 6 arguments in registers.
+ *
+ * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
+ * then loads new ss, cs, and rip from previously programmed MSRs.
+ * rflags gets masked by a value from another MSR (so CLD and CLAC
+ * are not needed). SYSCALL does not save anything on the stack
+ * and does not change rsp.
+ *
+ * Registers on entry:
+ * rax system call number
+ * rcx return address
+ * r11 saved rflags (note: r11 is callee-clobbered register in C ABI)
+ * rdi arg0
+ * rsi arg1
+ * rdx arg2
+ * r10 arg3 (needs to be moved to rcx to conform to C ABI)
+ * r8 arg4
+ * r9 arg5
+ * (note: r12-r15,rbp,rbx are callee-preserved in C ABI)
+ *
+ * Only called from user space.
+ *
+ * When user can change pt_regs->foo always force IRET. That is because
+ * it deals with uncanonical addresses better. SYSRET has trouble
+ * with them due to bugs in both AMD and Intel CPUs.
+ */
+
+ ENTRY(entry_SYSCALL_64)
+ /*
+ * Interrupts are off on entry.
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ SWAPGS_UNSAFE_STACK
+ /*
+ * A hypervisor implementation might want to use a label
+ * after the swapgs, so that it can do the swapgs
+ * for the guest and jump here on syscall.
+ */
+ GLOBAL(entry_SYSCALL_64_after_swapgs)
+
+ movq %rsp,PER_CPU_VAR(rsp_scratch)
+ movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp
+
+ /* Construct struct pt_regs on stack */
+ pushq $__USER_DS /* pt_regs->ss */
+ pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
+ /*
+ * Re-enable interrupts.
+ * We use 'rsp_scratch' as a scratch space, hence irq-off block above
+ * must execute atomically in the face of possible interrupt-driven
+ * task preemption. We must enable interrupts only after we're done
+ * with using rsp_scratch:
+ */
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushq %r11 /* pt_regs->flags */
+ pushq $__USER_CS /* pt_regs->cs */
+ pushq %rcx /* pt_regs->ip */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
+ pushq %r8 /* pt_regs->r8 */
+ pushq %r9 /* pt_regs->r9 */
+ pushq %r10 /* pt_regs->r10 */
+ pushq %r11 /* pt_regs->r11 */
+ sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
+
+ testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz tracesys
+ entry_SYSCALL_64_fastpath:
+ #if __SYSCALL_MASK == ~0
+ cmpq $__NR_syscall_max,%rax
+ #else
+ andl $__SYSCALL_MASK,%eax
+ cmpl $__NR_syscall_max,%eax
+ #endif
+ ja 1f /* return -ENOSYS (already in pt_regs->ax) */
+ movq %r10,%rcx
+ call *sys_call_table(,%rax,8)
+ movq %rax,RAX(%rsp)
+ 1:
+ /*
+ * Syscall return path ending with SYSRET (fast path).
+ * Has incompletely filled pt_regs.
+ */
+ LOCKDEP_SYS_EXIT
+ /*
+ * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
+ * it is too small to ever cause noticeable irq latency.
+ */
+ DISABLE_INTERRUPTS(CLBR_NONE)
+
+ /*
+ * We must check ti flags with interrupts (or at least preemption)
+ * off because we must *never* return to userspace without
+ * processing exit work that is enqueued if we're preempted here.
+ * In particular, returning to userspace with any of the one-shot
+ * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
+ * very bad.
+ */
+ testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
+
+ RESTORE_C_REGS_EXCEPT_RCX_R11
+ movq RIP(%rsp),%rcx
+ movq EFLAGS(%rsp),%r11
+ movq RSP(%rsp),%rsp
+ /*
+ * 64bit SYSRET restores rip from rcx,
+ * rflags from r11 (but RF and VM bits are forced to 0),
+ * cs and ss are loaded from MSRs.
+ * Restoration of rflags re-enables interrupts.
+ *
+ * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
+ * descriptor is not reinitialized. This means that we should
+ * avoid SYSRET with SS == NULL, which could happen if we schedule,
+ * exit the kernel, and re-enter using an interrupt vector. (All
+ * interrupt entries on x86_64 set SS to NULL.) We prevent that
+ * from happening by reloading SS in __switch_to. (Actually
+ * detecting the failure in 64-bit userspace is tricky but can be
+ * done.)
+ */
+ USERGS_SYSRET64
+
+ /* Do syscall entry tracing */
+ tracesys:
+ movq %rsp, %rdi
+ movl $AUDIT_ARCH_X86_64, %esi
+ call syscall_trace_enter_phase1
+ test %rax, %rax
+ jnz tracesys_phase2 /* if needed, run the slow path */
+ RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */
+ movq ORIG_RAX(%rsp), %rax
+ jmp entry_SYSCALL_64_fastpath /* and return to the fast path */
+
+ tracesys_phase2:
+ SAVE_EXTRA_REGS
+ movq %rsp, %rdi
+ movl $AUDIT_ARCH_X86_64, %esi
+ movq %rax,%rdx
+ call syscall_trace_enter_phase2
+
+ /*
+ * Reload registers from stack in case ptrace changed them.
+ * We don't reload %rax because syscall_trace_entry_phase2() returned
+ * the value it wants us to use in the table lookup.
+ */
+ RESTORE_C_REGS_EXCEPT_RAX
+ RESTORE_EXTRA_REGS
+ #if __SYSCALL_MASK == ~0
+ cmpq $__NR_syscall_max,%rax
+ #else
+ andl $__SYSCALL_MASK,%eax
+ cmpl $__NR_syscall_max,%eax
+ #endif
+ ja 1f /* return -ENOSYS (already in pt_regs->ax) */
+ movq %r10,%rcx /* fixup for C */
+ call *sys_call_table(,%rax,8)
+ movq %rax,RAX(%rsp)
+ 1:
+ /* Use IRET because user could have changed pt_regs->foo */
+
+ /*
+ * Syscall return path ending with IRET.
+ * Has correct iret frame.
+ */
+ GLOBAL(int_ret_from_sys_call)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */
+ TRACE_IRQS_OFF
+ movl $_TIF_ALLWORK_MASK,%edi
+ /* edi: mask to check */
+ GLOBAL(int_with_check)
+ LOCKDEP_SYS_EXIT_IRQ
+ GET_THREAD_INFO(%rcx)
+ movl TI_flags(%rcx),%edx
+ andl %edi,%edx
+ jnz int_careful
+ andl $~TS_COMPAT,TI_status(%rcx)
+ jmp syscall_return
+
+ /* Either reschedule or signal or syscall exit tracking needed. */
+ /* First do a reschedule test. */
+ /* edx: work, edi: workmask */
+ int_careful:
+ bt $TIF_NEED_RESCHED,%edx
+ jnc int_very_careful
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushq %rdi
+ SCHEDULE_USER
+ popq %rdi
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp int_with_check
+
+ /* handle signals and tracing -- both require a full pt_regs */
+ int_very_careful:
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ SAVE_EXTRA_REGS
+ /* Check for syscall exit trace */
+ testl $_TIF_WORK_SYSCALL_EXIT,%edx
+ jz int_signal
+ pushq %rdi
+ leaq 8(%rsp),%rdi # &ptregs -> arg1
+ call syscall_trace_leave
+ popq %rdi
+ andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
+ jmp int_restore_rest
+
+ int_signal:
+ testl $_TIF_DO_NOTIFY_MASK,%edx
+ jz 1f
+ movq %rsp,%rdi # &ptregs -> arg1
+ xorl %esi,%esi # oldset -> arg2
+ call do_notify_resume
+ 1: movl $_TIF_WORK_MASK,%edi
+ int_restore_rest:
+ RESTORE_EXTRA_REGS
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp int_with_check
+
+ syscall_return:
+ /* The IRETQ could re-enable interrupts: */
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_IRETQ
+
+ /*
+ * Try to use SYSRET instead of IRET if we're returning to
+ * a completely clean 64-bit userspace context.
+ */
+ movq RCX(%rsp),%rcx
+ movq RIP(%rsp),%r11
+ cmpq %rcx,%r11 /* RCX == RIP */
+ jne opportunistic_sysret_failed
+
+ /*
+ * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
+ * in kernel space. This essentially lets the user take over
+ * the kernel, since userspace controls RSP.
+ *
+ * If width of "canonical tail" ever becomes variable, this will need
+ * to be updated to remain correct on both old and new CPUs.
+ */
+ .ifne __VIRTUAL_MASK_SHIFT - 47
+ .error "virtual address width changed -- SYSRET checks need update"
+ .endif
+ /* Change top 16 bits to be the sign-extension of 47th bit */
+ shl $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
+ sar $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
+ /* If this changed %rcx, it was not canonical */
+ cmpq %rcx, %r11
+ jne opportunistic_sysret_failed
+
+ cmpq $__USER_CS,CS(%rsp) /* CS must match SYSRET */
+ jne opportunistic_sysret_failed
+
+ movq R11(%rsp),%r11
+ cmpq %r11,EFLAGS(%rsp) /* R11 == RFLAGS */
+ jne opportunistic_sysret_failed
+
+ /*
+ * SYSRET can't restore RF. SYSRET can restore TF, but unlike IRET,
+ * restoring TF results in a trap from userspace immediately after
+ * SYSRET. This would cause an infinite loop whenever #DB happens
+ * with register state that satisfies the opportunistic SYSRET
+ * conditions. For example, single-stepping this user code:
+ *
+ * movq $stuck_here,%rcx
+ * pushfq
+ * popq %r11
+ * stuck_here:
+ *
+ * would never get past 'stuck_here'.
+ */
+ testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
+ jnz opportunistic_sysret_failed
+
+ /* nothing to check for RSP */
+
+ cmpq $__USER_DS,SS(%rsp) /* SS must match SYSRET */
+ jne opportunistic_sysret_failed
+
+ /*
+ * We win! This label is here just for ease of understanding
+ * perf profiles. Nothing jumps here.
+ */
+ syscall_return_via_sysret:
+ /* rcx and r11 are already restored (see code above) */
+ RESTORE_C_REGS_EXCEPT_RCX_R11
+ movq RSP(%rsp),%rsp
+ USERGS_SYSRET64
+
+ opportunistic_sysret_failed:
+ SWAPGS
+ jmp restore_c_regs_and_iret
+ END(entry_SYSCALL_64)
+
+
+ .macro FORK_LIKE func
+ ENTRY(stub_\func)
+ SAVE_EXTRA_REGS 8
+ jmp sys_\func
+ END(stub_\func)
+ .endm
+
+ FORK_LIKE clone
+ FORK_LIKE fork
+ FORK_LIKE vfork
+
+ ENTRY(stub_execve)
+ call sys_execve
+ return_from_execve:
+ testl %eax, %eax
+ jz 1f
+ /* exec failed, can use fast SYSRET code path in this case */
+ ret
+ 1:
+ /* must use IRET code path (pt_regs->cs may have changed) */
+ addq $8, %rsp
+ ZERO_EXTRA_REGS
+ movq %rax,RAX(%rsp)
+ jmp int_ret_from_sys_call
+ END(stub_execve)
+ /*
+ * Remaining execve stubs are only 7 bytes long.
+ * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
+ */
+ .align 8
+ GLOBAL(stub_execveat)
+ call sys_execveat
+ jmp return_from_execve
+ END(stub_execveat)
+
+ #if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION)
+ .align 8
+ GLOBAL(stub_x32_execve)
+ GLOBAL(stub32_execve)
+ call compat_sys_execve
+ jmp return_from_execve
+ END(stub32_execve)
+ END(stub_x32_execve)
+ .align 8
+ GLOBAL(stub_x32_execveat)
+ GLOBAL(stub32_execveat)
+ call compat_sys_execveat
+ jmp return_from_execve
+ END(stub32_execveat)
+ END(stub_x32_execveat)
+ #endif
+
+ /*
+ * sigreturn is special because it needs to restore all registers on return.
+ * This cannot be done with SYSRET, so use the IRET return path instead.
+ */
+ ENTRY(stub_rt_sigreturn)
+ /*
+ * SAVE_EXTRA_REGS result is not normally needed:
+ * sigreturn overwrites all pt_regs->GPREGS.
+ * But sigreturn can fail (!), and there is no easy way to detect that.
+ * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
+ * we SAVE_EXTRA_REGS here.
+ */
+ SAVE_EXTRA_REGS 8
+ call sys_rt_sigreturn
+ return_from_stub:
+ addq $8, %rsp
+ RESTORE_EXTRA_REGS
+ movq %rax,RAX(%rsp)
+ jmp int_ret_from_sys_call
+ END(stub_rt_sigreturn)
+
+ #ifdef CONFIG_X86_X32_ABI
+ ENTRY(stub_x32_rt_sigreturn)
+ SAVE_EXTRA_REGS 8
+ call sys32_x32_rt_sigreturn
+ jmp return_from_stub
+ END(stub_x32_rt_sigreturn)
+ #endif
+
+ /*
+ * A newly forked process directly context switches into this address.
+ *
+ * rdi: prev task we switched from
+ */
+ ENTRY(ret_from_fork)
+
+ LOCK ; btr $TIF_FORK,TI_flags(%r8)
+
+ pushq $0x0002
+ popfq # reset kernel eflags
+
+ call schedule_tail # rdi: 'prev' task parameter
+
+ RESTORE_EXTRA_REGS
+
+ testb $3, CS(%rsp) # from kernel_thread?
+
+ /*
+ * By the time we get here, we have no idea whether our pt_regs,
+ * ti flags, and ti status came from the 64-bit SYSCALL fast path,
+ * the slow path, or one of the 32-bit compat paths.
+ * Use IRET code path to return, since it can safely handle
+ * all of the above.
+ */
+ jnz int_ret_from_sys_call
+
+ /* We came from kernel_thread */
+ /* nb: we depend on RESTORE_EXTRA_REGS above */
+ movq %rbp, %rdi
+ call *%rbx
+ movl $0, RAX(%rsp)
+ RESTORE_EXTRA_REGS
+ jmp int_ret_from_sys_call
+ END(ret_from_fork)
+
+ /*
+ * Build the entry stubs with some assembler magic.
+ * We pack 1 stub into every 8-byte block.
+ */
+ .align 8
+ ENTRY(irq_entries_start)
+ vector=FIRST_EXTERNAL_VECTOR
+ .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
+ pushq $(~vector+0x80) /* Note: always in signed byte range */
+ vector=vector+1
+ jmp common_interrupt
+ .align 8
+ .endr
+ END(irq_entries_start)
+
+ /*
+ * Interrupt entry/exit.
+ *
+ * Interrupt entry points save only callee clobbered registers in fast path.
+ *
+ * Entry runs with interrupts off.
+ */
+
+ /* 0(%rsp): ~(interrupt number) */
+ .macro interrupt func
+ cld
+ /*
+ * Since nothing in interrupt handling code touches r12...r15 members
+ * of "struct pt_regs", and since interrupts can nest, we can save
+ * four stack slots and simultaneously provide
+ * an unwind-friendly stack layout by saving "truncated" pt_regs
+ * exactly up to rbp slot, without these members.
+ */
+ ALLOC_PT_GPREGS_ON_STACK -RBP
+ SAVE_C_REGS -RBP
+ /* this goes to 0(%rsp) for unwinder, not for saving the value: */
+ SAVE_EXTRA_REGS_RBP -RBP
+
+ leaq -RBP(%rsp),%rdi /* arg1 for \func (pointer to pt_regs) */
+
+ testb $3, CS-RBP(%rsp)
+ jz 1f
+ SWAPGS
+ 1:
+ /*
+ * Save previous stack pointer, optionally switch to interrupt stack.
+ * irq_count is used to check if a CPU is already on an interrupt stack
+ * or not. While this is essentially redundant with preempt_count it is
+ * a little cheaper to use a separate counter in the PDA (short of
+ * moving irq_enter into assembly, which would be too much work)
+ */
+ movq %rsp, %rsi
+ incl PER_CPU_VAR(irq_count)
+ cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
+ pushq %rsi
+ /* We entered an interrupt context - irqs are off: */
+ TRACE_IRQS_OFF
+
+ call \func
+ .endm
+
+ /*
+ * The interrupt stubs push (~vector+0x80) onto the stack and
+ * then jump to common_interrupt.
+ */
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
+ common_interrupt:
+ ASM_CLAC
+ addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
+ interrupt do_IRQ
+ /* 0(%rsp): old RSP */
+ ret_from_intr:
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ decl PER_CPU_VAR(irq_count)
+
+ /* Restore saved previous stack */
+ popq %rsi
+ /* return code expects complete pt_regs - adjust rsp accordingly: */
+ leaq -RBP(%rsi),%rsp
+
+ testb $3, CS(%rsp)
+ jz retint_kernel
+ /* Interrupt came from user space */
+ retint_user:
+ GET_THREAD_INFO(%rcx)
+ /*
+ * %rcx: thread info. Interrupts off.
+ */
+ retint_with_reschedule:
+ movl $_TIF_WORK_MASK,%edi
+ retint_check:
+ LOCKDEP_SYS_EXIT_IRQ
+ movl TI_flags(%rcx),%edx
+ andl %edi,%edx
+ jnz retint_careful
+
+ retint_swapgs: /* return to user-space */
+ /*
+ * The iretq could re-enable interrupts:
+ */
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_IRETQ
+
+ SWAPGS
+ jmp restore_c_regs_and_iret
+
+ /* Returning to kernel space */
+ retint_kernel:
+ #ifdef CONFIG_PREEMPT
+ /* Interrupts are off */
+ /* Check if we need preemption */
+ bt $9,EFLAGS(%rsp) /* interrupts were off? */
+ jnc 1f
+ 0: cmpl $0,PER_CPU_VAR(__preempt_count)
+ jnz 1f
+ call preempt_schedule_irq
+ jmp 0b
+ 1:
+ #endif
+ /*
+ * The iretq could re-enable interrupts:
+ */
+ TRACE_IRQS_IRETQ
+
+ /*
+ * At this label, code paths which return to kernel and to user,
+ * which come from interrupts/exception and from syscalls, merge.
+ */
+ restore_c_regs_and_iret:
+ RESTORE_C_REGS
+ REMOVE_PT_GPREGS_FROM_STACK 8
+ INTERRUPT_RETURN
+
+ ENTRY(native_iret)
+ /*
+ * Are we returning to a stack segment from the LDT? Note: in
+ * 64-bit mode SS:RSP on the exception stack is always valid.
+ */
+ #ifdef CONFIG_X86_ESPFIX64
+ testb $4,(SS-RIP)(%rsp)
+ jnz native_irq_return_ldt
+ #endif
+
+ .global native_irq_return_iret
+ native_irq_return_iret:
+ /*
+ * This may fault. Non-paranoid faults on return to userspace are
+ * handled by fixup_bad_iret. These include #SS, #GP, and #NP.
+ * Double-faults due to espfix64 are handled in do_double_fault.
+ * Other faults here are fatal.
+ */
+ iretq
+
+ #ifdef CONFIG_X86_ESPFIX64
+ native_irq_return_ldt:
+ pushq %rax
+ pushq %rdi
+ SWAPGS
+ movq PER_CPU_VAR(espfix_waddr),%rdi
+ movq %rax,(0*8)(%rdi) /* RAX */
+ movq (2*8)(%rsp),%rax /* RIP */
+ movq %rax,(1*8)(%rdi)
+ movq (3*8)(%rsp),%rax /* CS */
+ movq %rax,(2*8)(%rdi)
+ movq (4*8)(%rsp),%rax /* RFLAGS */
+ movq %rax,(3*8)(%rdi)
+ movq (6*8)(%rsp),%rax /* SS */
+ movq %rax,(5*8)(%rdi)
+ movq (5*8)(%rsp),%rax /* RSP */
+ movq %rax,(4*8)(%rdi)
+ andl $0xffff0000,%eax
+ popq %rdi
+ orq PER_CPU_VAR(espfix_stack),%rax
+ SWAPGS
+ movq %rax,%rsp
+ popq %rax
+ jmp native_irq_return_iret
+ #endif
+
+ /* edi: workmask, edx: work */
+ retint_careful:
+ bt $TIF_NEED_RESCHED,%edx
+ jnc retint_signal
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ pushq %rdi
+ SCHEDULE_USER
+ popq %rdi
+ GET_THREAD_INFO(%rcx)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp retint_check
+
+ retint_signal:
+ testl $_TIF_DO_NOTIFY_MASK,%edx
+ jz retint_swapgs
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ SAVE_EXTRA_REGS
+ movq $-1,ORIG_RAX(%rsp)
+ xorl %esi,%esi # oldset
+ movq %rsp,%rdi # &pt_regs
+ call do_notify_resume
+ RESTORE_EXTRA_REGS
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ GET_THREAD_INFO(%rcx)
+ jmp retint_with_reschedule
+
+ END(common_interrupt)
+
+ /*
+ * APIC interrupts.
+ */
+ .macro apicinterrupt3 num sym do_sym
+ ENTRY(\sym)
+ ASM_CLAC
+ pushq $~(\num)
+ .Lcommon_\sym:
+ interrupt \do_sym
+ jmp ret_from_intr
+ END(\sym)
+ .endm
+
+ #ifdef CONFIG_TRACING
+ #define trace(sym) trace_##sym
+ #define smp_trace(sym) smp_trace_##sym
+
+ .macro trace_apicinterrupt num sym
+ apicinterrupt3 \num trace(\sym) smp_trace(\sym)
+ .endm
+ #else
+ .macro trace_apicinterrupt num sym do_sym
+ .endm
+ #endif
+
+ .macro apicinterrupt num sym do_sym
+ apicinterrupt3 \num \sym \do_sym
+ trace_apicinterrupt \num \sym
+ .endm
+
+ #ifdef CONFIG_SMP
+ apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \
+ irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+ apicinterrupt3 REBOOT_VECTOR \
+ reboot_interrupt smp_reboot_interrupt
+ #endif
+
+ #ifdef CONFIG_X86_UV
+ apicinterrupt3 UV_BAU_MESSAGE \
+ uv_bau_message_intr1 uv_bau_message_interrupt
+ #endif
+ apicinterrupt LOCAL_TIMER_VECTOR \
+ apic_timer_interrupt smp_apic_timer_interrupt
+ apicinterrupt X86_PLATFORM_IPI_VECTOR \
+ x86_platform_ipi smp_x86_platform_ipi
+
+ #ifdef CONFIG_HAVE_KVM
+ apicinterrupt3 POSTED_INTR_VECTOR \
+ kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
++apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR \
++ kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi
+ #endif
+
+ #ifdef CONFIG_X86_MCE_THRESHOLD
+ apicinterrupt THRESHOLD_APIC_VECTOR \
+ threshold_interrupt smp_threshold_interrupt
+ #endif
+
++#ifdef CONFIG_X86_MCE_AMD
++apicinterrupt DEFERRED_ERROR_VECTOR \
++ deferred_error_interrupt smp_deferred_error_interrupt
++#endif
++
+ #ifdef CONFIG_X86_THERMAL_VECTOR
+ apicinterrupt THERMAL_APIC_VECTOR \
+ thermal_interrupt smp_thermal_interrupt
+ #endif
+
+ #ifdef CONFIG_SMP
+ apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
+ call_function_single_interrupt smp_call_function_single_interrupt
+ apicinterrupt CALL_FUNCTION_VECTOR \
+ call_function_interrupt smp_call_function_interrupt
+ apicinterrupt RESCHEDULE_VECTOR \
+ reschedule_interrupt smp_reschedule_interrupt
+ #endif
+
+ apicinterrupt ERROR_APIC_VECTOR \
+ error_interrupt smp_error_interrupt
+ apicinterrupt SPURIOUS_APIC_VECTOR \
+ spurious_interrupt smp_spurious_interrupt
+
+ #ifdef CONFIG_IRQ_WORK
+ apicinterrupt IRQ_WORK_VECTOR \
+ irq_work_interrupt smp_irq_work_interrupt
+ #endif
+
+ /*
+ * Exception entry points.
+ */
+ #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
+
+ .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
+ ENTRY(\sym)
+ /* Sanity check */
+ .if \shift_ist != -1 && \paranoid == 0
+ .error "using shift_ist requires paranoid=1"
+ .endif
+
+ ASM_CLAC
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+
+ .ifeq \has_error_code
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
+ .endif
+
+ ALLOC_PT_GPREGS_ON_STACK
+
+ .if \paranoid
+ .if \paranoid == 1
+ testb $3, CS(%rsp) /* If coming from userspace, switch */
+ jnz 1f /* stacks. */
+ .endif
+ call paranoid_entry
+ .else
+ call error_entry
+ .endif
+ /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
+
+ .if \paranoid
+ .if \shift_ist != -1
+ TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */
+ .else
+ TRACE_IRQS_OFF
+ .endif
+ .endif
+
+ movq %rsp,%rdi /* pt_regs pointer */
+
+ .if \has_error_code
+ movq ORIG_RAX(%rsp),%rsi /* get error code */
+ movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
+ .else
+ xorl %esi,%esi /* no error code */
+ .endif
+
+ .if \shift_ist != -1
+ subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
+ .endif
+
+ call \do_sym
+
+ .if \shift_ist != -1
+ addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
+ .endif
+
+ /* these procedures expect "no swapgs" flag in ebx */
+ .if \paranoid
+ jmp paranoid_exit
+ .else
+ jmp error_exit
+ .endif
+
+ .if \paranoid == 1
+ /*
+ * Paranoid entry from userspace. Switch stacks and treat it
+ * as a normal entry. This means that paranoid handlers
+ * run in real process context if user_mode(regs).
+ */
+ 1:
+ call error_entry
+
+
+ movq %rsp,%rdi /* pt_regs pointer */
+ call sync_regs
+ movq %rax,%rsp /* switch stack */
+
+ movq %rsp,%rdi /* pt_regs pointer */
+
+ .if \has_error_code
+ movq ORIG_RAX(%rsp),%rsi /* get error code */
+ movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
+ .else
+ xorl %esi,%esi /* no error code */
+ .endif
+
+ call \do_sym
+
+ jmp error_exit /* %ebx: no swapgs flag */
+ .endif
+ END(\sym)
+ .endm
+
+ #ifdef CONFIG_TRACING
+ .macro trace_idtentry sym do_sym has_error_code:req
+ idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
+ idtentry \sym \do_sym has_error_code=\has_error_code
+ .endm
+ #else
+ .macro trace_idtentry sym do_sym has_error_code:req
+ idtentry \sym \do_sym has_error_code=\has_error_code
+ .endm
+ #endif
+
+ idtentry divide_error do_divide_error has_error_code=0
+ idtentry overflow do_overflow has_error_code=0
+ idtentry bounds do_bounds has_error_code=0
+ idtentry invalid_op do_invalid_op has_error_code=0
+ idtentry device_not_available do_device_not_available has_error_code=0
+ idtentry double_fault do_double_fault has_error_code=1 paranoid=2
+ idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
+ idtentry invalid_TSS do_invalid_TSS has_error_code=1
+ idtentry segment_not_present do_segment_not_present has_error_code=1
+ idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0
+ idtentry coprocessor_error do_coprocessor_error has_error_code=0
+ idtentry alignment_check do_alignment_check has_error_code=1
+ idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
+
+
+ /* Reload gs selector with exception handling */
+ /* edi: new selector */
+ ENTRY(native_load_gs_index)
+ pushfq
+ DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
+ SWAPGS
+ gs_change:
+ movl %edi,%gs
+ 2: mfence /* workaround */
+ SWAPGS
+ popfq
+ ret
+ END(native_load_gs_index)
+
+ _ASM_EXTABLE(gs_change,bad_gs)
+ .section .fixup,"ax"
+ /* running with kernelgs */
+ bad_gs:
+ SWAPGS /* switch back to user gs */
+ xorl %eax,%eax
+ movl %eax,%gs
+ jmp 2b
+ .previous
+
+ /* Call softirq on interrupt stack. Interrupts are off. */
+ ENTRY(do_softirq_own_stack)
+ pushq %rbp
+ mov %rsp,%rbp
+ incl PER_CPU_VAR(irq_count)
+ cmove PER_CPU_VAR(irq_stack_ptr),%rsp
+ push %rbp # backlink for old unwinder
+ call __do_softirq
+ leaveq
+ decl PER_CPU_VAR(irq_count)
+ ret
+ END(do_softirq_own_stack)
+
+ #ifdef CONFIG_XEN
+ idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
+
+ /*
+ * A note on the "critical region" in our callback handler.
+ * We want to avoid stacking callback handlers due to events occurring
+ * during handling of the last event. To do this, we keep events disabled
+ * until we've done all processing. HOWEVER, we must enable events before
+ * popping the stack frame (can't be done atomically) and so it would still
+ * be possible to get enough handler activations to overflow the stack.
+ * Although unlikely, bugs of that kind are hard to track down, so we'd
+ * like to avoid the possibility.
+ * So, on entry to the handler we detect whether we interrupted an
+ * existing activation in its critical region -- if so, we pop the current
+ * activation and restart the handler using the previous one.
+ */
+ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
+ /*
+ * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+ * see the correct pointer to the pt_regs
+ */
+ movq %rdi, %rsp # we don't return, adjust the stack frame
+ 11: incl PER_CPU_VAR(irq_count)
+ movq %rsp,%rbp
+ cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
+ pushq %rbp # backlink for old unwinder
+ call xen_evtchn_do_upcall
+ popq %rsp
+ decl PER_CPU_VAR(irq_count)
+ #ifndef CONFIG_PREEMPT
+ call xen_maybe_preempt_hcall
+ #endif
+ jmp error_exit
+ END(xen_do_hypervisor_callback)
+
+ /*
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ * 1. Fault while reloading DS, ES, FS or GS
+ * 2. Fault while executing IRET
+ * Category 1 we do not need to fix up as Xen has already reloaded all segment
+ * registers that could be reloaded and zeroed the others.
+ * Category 2 we fix up by killing the current process. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by comparing each saved segment register
+ * with its current contents: any discrepancy means we in category 1.
+ */
+ ENTRY(xen_failsafe_callback)
+ movl %ds,%ecx
+ cmpw %cx,0x10(%rsp)
+ jne 1f
+ movl %es,%ecx
+ cmpw %cx,0x18(%rsp)
+ jne 1f
+ movl %fs,%ecx
+ cmpw %cx,0x20(%rsp)
+ jne 1f
+ movl %gs,%ecx
+ cmpw %cx,0x28(%rsp)
+ jne 1f
+ /* All segments match their saved values => Category 2 (Bad IRET). */
+ movq (%rsp),%rcx
+ movq 8(%rsp),%r11
+ addq $0x30,%rsp
+ pushq $0 /* RIP */
+ pushq %r11
+ pushq %rcx
+ jmp general_protection
+ 1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+ movq (%rsp),%rcx
+ movq 8(%rsp),%r11
+ addq $0x30,%rsp
+ pushq $-1 /* orig_ax = -1 => not a system call */
+ ALLOC_PT_GPREGS_ON_STACK
+ SAVE_C_REGS
+ SAVE_EXTRA_REGS
+ jmp error_exit
+ END(xen_failsafe_callback)
+
+ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
+ xen_hvm_callback_vector xen_evtchn_do_upcall
+
+ #endif /* CONFIG_XEN */
+
+ #if IS_ENABLED(CONFIG_HYPERV)
+ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
+ hyperv_callback_vector hyperv_vector_handler
+ #endif /* CONFIG_HYPERV */
+
+ idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
+ idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
+ idtentry stack_segment do_stack_segment has_error_code=1
+ #ifdef CONFIG_XEN
+ idtentry xen_debug do_debug has_error_code=0
+ idtentry xen_int3 do_int3 has_error_code=0
+ idtentry xen_stack_segment do_stack_segment has_error_code=1
+ #endif
+ idtentry general_protection do_general_protection has_error_code=1
+ trace_idtentry page_fault do_page_fault has_error_code=1
+ #ifdef CONFIG_KVM_GUEST
+ idtentry async_page_fault do_async_page_fault has_error_code=1
+ #endif
+ #ifdef CONFIG_X86_MCE
+ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
+ #endif
+
+ /*
+ * Save all registers in pt_regs, and switch gs if needed.
+ * Use slow, but surefire "are we in kernel?" check.
+ * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
+ */
+ ENTRY(paranoid_entry)
+ cld
+ SAVE_C_REGS 8
+ SAVE_EXTRA_REGS 8
+ movl $1,%ebx
+ movl $MSR_GS_BASE,%ecx
+ rdmsr
+ testl %edx,%edx
+ js 1f /* negative -> in kernel */
+ SWAPGS
+ xorl %ebx,%ebx
+ 1: ret
+ END(paranoid_entry)
+
+ /*
+ * "Paranoid" exit path from exception stack. This is invoked
+ * only on return from non-NMI IST interrupts that came
+ * from kernel space.
+ *
+ * We may be returning to very strange contexts (e.g. very early
+ * in syscall entry), so checking for preemption here would
+ * be complicated. Fortunately, we there's no good reason
+ * to try to handle preemption here.
+ */
+ /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
+ ENTRY(paranoid_exit)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF_DEBUG
+ testl %ebx,%ebx /* swapgs needed? */
+ jnz paranoid_exit_no_swapgs
+ TRACE_IRQS_IRETQ
+ SWAPGS_UNSAFE_STACK
+ jmp paranoid_exit_restore
+ paranoid_exit_no_swapgs:
+ TRACE_IRQS_IRETQ_DEBUG
+ paranoid_exit_restore:
+ RESTORE_EXTRA_REGS
+ RESTORE_C_REGS
+ REMOVE_PT_GPREGS_FROM_STACK 8
+ INTERRUPT_RETURN
+ END(paranoid_exit)
+
+ /*
+ * Save all registers in pt_regs, and switch gs if needed.
+ * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
+ */
+ ENTRY(error_entry)
+ cld
+ SAVE_C_REGS 8
+ SAVE_EXTRA_REGS 8
+ xorl %ebx,%ebx
+ testb $3, CS+8(%rsp)
+ jz error_kernelspace
+ error_swapgs:
+ SWAPGS
+ error_sti:
+ TRACE_IRQS_OFF
+ ret
+
+ /*
+ * There are two places in the kernel that can potentially fault with
+ * usergs. Handle them here. B stepping K8s sometimes report a
+ * truncated RIP for IRET exceptions returning to compat mode. Check
+ * for these here too.
+ */
+ error_kernelspace:
+ incl %ebx
+ leaq native_irq_return_iret(%rip),%rcx
+ cmpq %rcx,RIP+8(%rsp)
+ je error_bad_iret
+ movl %ecx,%eax /* zero extend */
+ cmpq %rax,RIP+8(%rsp)
+ je bstep_iret
+ cmpq $gs_change,RIP+8(%rsp)
+ je error_swapgs
+ jmp error_sti
+
+ bstep_iret:
+ /* Fix truncated RIP */
+ movq %rcx,RIP+8(%rsp)
+ /* fall through */
+
+ error_bad_iret:
+ SWAPGS
+ mov %rsp,%rdi
+ call fixup_bad_iret
+ mov %rax,%rsp
+ decl %ebx /* Return to usergs */
+ jmp error_sti
+ END(error_entry)
+
+
+ /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
+ ENTRY(error_exit)
+ movl %ebx,%eax
+ RESTORE_EXTRA_REGS
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl %eax,%eax
+ jnz retint_kernel
+ jmp retint_user
+ END(error_exit)
+
+ /* Runs on exception stack */
+ ENTRY(nmi)
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ /*
+ * We allow breakpoints in NMIs. If a breakpoint occurs, then
+ * the iretq it performs will take us out of NMI context.
+ * This means that we can have nested NMIs where the next
+ * NMI is using the top of the stack of the previous NMI. We
+ * can't let it execute because the nested NMI will corrupt the
+ * stack of the previous NMI. NMI handlers are not re-entrant
+ * anyway.
+ *
+ * To handle this case we do the following:
+ * Check the a special location on the stack that contains
+ * a variable that is set when NMIs are executing.
+ * The interrupted task's stack is also checked to see if it
+ * is an NMI stack.
+ * If the variable is not set and the stack is not the NMI
+ * stack then:
+ * o Set the special variable on the stack
+ * o Copy the interrupt frame into a "saved" location on the stack
+ * o Copy the interrupt frame into a "copy" location on the stack
+ * o Continue processing the NMI
+ * If the variable is set or the previous stack is the NMI stack:
+ * o Modify the "copy" location to jump to the repeate_nmi
+ * o return back to the first NMI
+ *
+ * Now on exit of the first NMI, we first clear the stack variable
+ * The NMI stack will tell any nested NMIs at that point that it is
+ * nested. Then we pop the stack normally with iret, and if there was
+ * a nested NMI that updated the copy interrupt stack frame, a
+ * jump will be made to the repeat_nmi code that will handle the second
+ * NMI.
+ */
+
+ /* Use %rdx as our temp variable throughout */
+ pushq %rdx
+
+ /*
+ * If %cs was not the kernel segment, then the NMI triggered in user
+ * space, which means it is definitely not nested.
+ */
+ cmpl $__KERNEL_CS, 16(%rsp)
+ jne first_nmi
+
+ /*
+ * Check the special variable on the stack to see if NMIs are
+ * executing.
+ */
+ cmpl $1, -8(%rsp)
+ je nested_nmi
+
+ /*
+ * Now test if the previous stack was an NMI stack.
+ * We need the double check. We check the NMI stack to satisfy the
+ * race when the first NMI clears the variable before returning.
+ * We check the variable because the first NMI could be in a
+ * breakpoint routine using a breakpoint stack.
+ */
+ lea 6*8(%rsp), %rdx
+ /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
+ cmpq %rdx, 4*8(%rsp)
+ /* If the stack pointer is above the NMI stack, this is a normal NMI */
+ ja first_nmi
+ subq $EXCEPTION_STKSZ, %rdx
+ cmpq %rdx, 4*8(%rsp)
+ /* If it is below the NMI stack, it is a normal NMI */
+ jb first_nmi
+ /* Ah, it is within the NMI stack, treat it as nested */
+
+ nested_nmi:
+ /*
+ * Do nothing if we interrupted the fixup in repeat_nmi.
+ * It's about to repeat the NMI handler, so we are fine
+ * with ignoring this one.
+ */
+ movq $repeat_nmi, %rdx
+ cmpq 8(%rsp), %rdx
+ ja 1f
+ movq $end_repeat_nmi, %rdx
+ cmpq 8(%rsp), %rdx
+ ja nested_nmi_out
+
+ 1:
+ /* Set up the interrupted NMIs stack to jump to repeat_nmi */
+ leaq -1*8(%rsp), %rdx
+ movq %rdx, %rsp
+ leaq -10*8(%rsp), %rdx
+ pushq $__KERNEL_DS
+ pushq %rdx
+ pushfq
+ pushq $__KERNEL_CS
+ pushq $repeat_nmi
+
+ /* Put stack back */
+ addq $(6*8), %rsp
+
+ nested_nmi_out:
+ popq %rdx
+
+ /* No need to check faults here */
+ INTERRUPT_RETURN
+
+ first_nmi:
+ /*
+ * Because nested NMIs will use the pushed location that we
+ * stored in rdx, we must keep that space available.
+ * Here's what our stack frame will look like:
+ * +-------------------------+
+ * | original SS |
+ * | original Return RSP |
+ * | original RFLAGS |
+ * | original CS |
+ * | original RIP |
+ * +-------------------------+
+ * | temp storage for rdx |
+ * +-------------------------+
+ * | NMI executing variable |
+ * +-------------------------+
+ * | copied SS |
+ * | copied Return RSP |
+ * | copied RFLAGS |
+ * | copied CS |
+ * | copied RIP |
+ * +-------------------------+
+ * | Saved SS |
+ * | Saved Return RSP |
+ * | Saved RFLAGS |
+ * | Saved CS |
+ * | Saved RIP |
+ * +-------------------------+
+ * | pt_regs |
+ * +-------------------------+
+ *
+ * The saved stack frame is used to fix up the copied stack frame
+ * that a nested NMI may change to make the interrupted NMI iret jump
+ * to the repeat_nmi. The original stack frame and the temp storage
+ * is also used by nested NMIs and can not be trusted on exit.
+ */
+ /* Do not pop rdx, nested NMIs will corrupt that part of the stack */
+ movq (%rsp), %rdx
+
+ /* Set the NMI executing variable on the stack. */
+ pushq $1
+
+ /*
+ * Leave room for the "copied" frame
+ */
+ subq $(5*8), %rsp
+
+ /* Copy the stack frame to the Saved frame */
+ .rept 5
+ pushq 11*8(%rsp)
+ .endr
+
+ /* Everything up to here is safe from nested NMIs */
+
+ /*
+ * If there was a nested NMI, the first NMI's iret will return
+ * here. But NMIs are still enabled and we can take another
+ * nested NMI. The nested NMI checks the interrupted RIP to see
+ * if it is between repeat_nmi and end_repeat_nmi, and if so
+ * it will just return, as we are about to repeat an NMI anyway.
+ * This makes it safe to copy to the stack frame that a nested
+ * NMI will update.
+ */
+ repeat_nmi:
+ /*
+ * Update the stack variable to say we are still in NMI (the update
+ * is benign for the non-repeat case, where 1 was pushed just above
+ * to this very stack slot).
+ */
+ movq $1, 10*8(%rsp)
+
+ /* Make another copy, this one may be modified by nested NMIs */
+ addq $(10*8), %rsp
+ .rept 5
+ pushq -6*8(%rsp)
+ .endr
+ subq $(5*8), %rsp
+ end_repeat_nmi:
+
+ /*
+ * Everything below this point can be preempted by a nested
+ * NMI if the first NMI took an exception and reset our iret stack
+ * so that we repeat another NMI.
+ */
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
+ ALLOC_PT_GPREGS_ON_STACK
+
+ /*
+ * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
+ * as we should not be calling schedule in NMI context.
+ * Even with normal interrupts enabled. An NMI should not be
+ * setting NEED_RESCHED or anything that normal interrupts and
+ * exceptions might do.
+ */
+ call paranoid_entry
+
+ /*
+ * Save off the CR2 register. If we take a page fault in the NMI then
+ * it could corrupt the CR2 value. If the NMI preempts a page fault
+ * handler before it was able to read the CR2 register, and then the
+ * NMI itself takes a page fault, the page fault that was preempted
+ * will read the information from the NMI page fault and not the
+ * origin fault. Save it off and restore it if it changes.
+ * Use the r12 callee-saved register.
+ */
+ movq %cr2, %r12
+
+ /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
+ movq %rsp,%rdi
+ movq $-1,%rsi
+ call do_nmi
+
+ /* Did the NMI take a page fault? Restore cr2 if it did */
+ movq %cr2, %rcx
+ cmpq %rcx, %r12
+ je 1f
+ movq %r12, %cr2
+ 1:
+ testl %ebx,%ebx /* swapgs needed? */
+ jnz nmi_restore
+ nmi_swapgs:
+ SWAPGS_UNSAFE_STACK
+ nmi_restore:
+ RESTORE_EXTRA_REGS
+ RESTORE_C_REGS
+ /* Pop the extra iret frame at once */
+ REMOVE_PT_GPREGS_FROM_STACK 6*8
+
+ /* Clear the NMI executing stack variable */
+ movq $0, 5*8(%rsp)
+ INTERRUPT_RETURN
+ END(nmi)
+
+ ENTRY(ignore_sysret)
+ mov $-ENOSYS,%eax
+ sysret
+ END(ignore_sysret)
+
projects / linux-2.6-block.git / commitdiff