endif
if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
endif
source "arch/arm/mach-s5p6440/Kconfig"
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_SA1100) := sa1100
+++ /dev/null
-# Copyright 2008 Openmoko, Inc.
-# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
- bool
- select CPU_S3C6400_INIT
- select CPU_S3C6400_CLOCK
- help
- Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
- bool
- help
- Internal configuration for default SDHCI
- setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
- bool "SMDK6400"
- select CPU_S3C6400
- select S3C_DEV_HSMMC
- select S3C_DEV_NAND
- select S3C6400_SETUP_SDHCI
- help
- Machine support for the Samsung SMDK6400
+++ /dev/null
-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+++ /dev/null
- zreladdr-y := 0x50008000
-params_phys-y := 0x50000100
+++ /dev/null
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C_PA_UART
- ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS (16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
- /* DMA0/SDMA0 */
- DMACH_UART0 = 0,
- DMACH_UART0_SRC2,
- DMACH_UART1,
- DMACH_UART1_SRC2,
- DMACH_UART2,
- DMACH_UART2_SRC2,
- DMACH_UART3,
- DMACH_UART3_SRC2,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_OUT,
- DMACH_I2S0_IN,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_HSI_I2SV40_TX,
- DMACH_HSI_I2SV40_RX,
-
- /* DMA1/SDMA1 */
- DMACH_PCM1_TX = 16,
- DMACH_PCM1_RX,
- DMACH_I2S1_OUT,
- DMACH_I2S1_IN,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_AC97_PCMOUT,
- DMACH_AC97_PCMIN,
- DMACH_AC97_MICIN,
- DMACH_PWM,
- DMACH_IRDA,
- DMACH_EXTERNAL,
- DMACH_RES1,
- DMACH_RES2,
- DMACH_SECURITY_RX, /* SDMA1 only */
- DMACH_SECURITY_TX, /* SDMA1 only */
- DMACH_MAX /* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
- return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR (1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <mach/map.h>
-#include <plat/irqs.h>
-
-#include <asm/entry-macro-vic2.S>
+++ /dev/null
-/* arch/arm/mach-s3c6400/include/mach/gpio.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-/* GPIO bank sizes */
-#define S3C64XX_GPIO_A_NR (8)
-#define S3C64XX_GPIO_B_NR (7)
-#define S3C64XX_GPIO_C_NR (8)
-#define S3C64XX_GPIO_D_NR (5)
-#define S3C64XX_GPIO_E_NR (5)
-#define S3C64XX_GPIO_F_NR (16)
-#define S3C64XX_GPIO_G_NR (7)
-#define S3C64XX_GPIO_H_NR (10)
-#define S3C64XX_GPIO_I_NR (16)
-#define S3C64XX_GPIO_J_NR (12)
-#define S3C64XX_GPIO_K_NR (16)
-#define S3C64XX_GPIO_L_NR (15)
-#define S3C64XX_GPIO_M_NR (6)
-#define S3C64XX_GPIO_N_NR (16)
-#define S3C64XX_GPIO_O_NR (16)
-#define S3C64XX_GPIO_P_NR (15)
-#define S3C64XX_GPIO_Q_NR (9)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S3C64XX_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s3c_gpio_number {
- S3C64XX_GPIO_A_START = 0,
- S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
- S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
- S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
- S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
- S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
- S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
- S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
- S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
- S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
- S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
- S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
- S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
- S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
- S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
- S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
- S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
-};
-
-/* S3C64XX GPIO number definitions. */
-
-#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
-#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
-#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
-#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
-#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
-#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
-#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
-#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
-#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
-#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
-#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
-#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
-#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
-#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
-#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
-#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
-#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
-
-/* the end of the S3C64XX specific gpios */
-#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-#define S3C_GPIO_END S3C64XX_GPIO_END
-
-/* define the number of gpios we need to the one after the GPQ() range */
-#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-
-#include <asm-generic/gpio.h>
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/map.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-
-/*
- * Post-mux Chip Select Regions Xm0CSn_
- * These may be used by SROM, NAND or CF depending on settings
- */
-
-#define S3C64XX_PA_XM0CSN0 (0x10000000)
-#define S3C64XX_PA_XM0CSN1 (0x18000000)
-#define S3C64XX_PA_XM0CSN2 (0x20000000)
-#define S3C64XX_PA_XM0CSN3 (0x28000000)
-#define S3C64XX_PA_XM0CSN4 (0x30000000)
-#define S3C64XX_PA_XM0CSN5 (0x38000000)
-
-/* HSMMC units */
-#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
-#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
-#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
-#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
-
-#define S3C_PA_UART (0x7F005000)
-#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
-#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
-#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
-#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
-#define S3C_UART_OFFSET (0x400)
-
-/* See notes on UART VA mapping in debug-macro.S */
-#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
-
-#define S3C_VA_UART0 S3C_VA_UARTx(0)
-#define S3C_VA_UART1 S3C_VA_UARTx(1)
-#define S3C_VA_UART2 S3C_VA_UARTx(2)
-#define S3C_VA_UART3 S3C_VA_UARTx(3)
-
-#define S3C64XX_PA_SROM (0x70000000)
-
-#define S3C64XX_PA_NAND (0x70200000)
-#define S3C64XX_PA_FB (0x77100000)
-#define S3C64XX_PA_USB_HSOTG (0x7C000000)
-#define S3C64XX_PA_WATCHDOG (0x7E004000)
-#define S3C64XX_PA_RTC (0x7E005000)
-#define S3C64XX_PA_ADC (0x7E00B000)
-#define S3C64XX_PA_SYSCON (0x7E00F000)
-#define S3C64XX_PA_AC97 (0x7F001000)
-#define S3C64XX_PA_IIS0 (0x7F002000)
-#define S3C64XX_PA_IIS1 (0x7F003000)
-#define S3C64XX_PA_TIMER (0x7F006000)
-#define S3C64XX_PA_IIC0 (0x7F004000)
-#define S3C64XX_PA_SPI0 (0x7F00B000)
-#define S3C64XX_PA_SPI1 (0x7F00C000)
-#define S3C64XX_PA_PCM0 (0x7F009000)
-#define S3C64XX_PA_PCM1 (0x7F00A000)
-#define S3C64XX_PA_IISV4 (0x7F00D000)
-#define S3C64XX_PA_IIC1 (0x7F00F000)
-
-#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
-#define S3C64XX_SZ_GPIO SZ_4K
-
-#define S3C64XX_PA_SDRAM (0x50000000)
-#define S3C64XX_PA_VIC0 (0x71200000)
-#define S3C64XX_PA_VIC1 (0x71300000)
-
-#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
-
-#define S3C64XX_PA_USBHOST (0x74300000)
-
-#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
-
-/* compatibiltiy defines. */
-#define S3C_PA_TIMER S3C64XX_PA_TIMER
-#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
-#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
-#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
-#define S3C_PA_IIC S3C64XX_PA_IIC0
-#define S3C_PA_IIC1 S3C64XX_PA_IIC1
-#define S3C_PA_NAND S3C64XX_PA_NAND
-#define S3C_PA_FB S3C64XX_PA_FB
-#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
-#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
-
-#endif /* __ASM_ARCH_6400_MAP_H */
+++ /dev/null
-/* arch/arm/mach-s3c6400/include/mach/memory.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x50000000)
-
-#endif
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - clock register compatibility with s3c24xx
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-clock.h>
-
+++ /dev/null
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Copyright 2009 Samsung Electronics Co.
- *
- * Pawel Osciak <p.osciak@samsung.com>
- * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
- *
- * Framebuffer register definitions for Samsung S3C64xx.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MACH_REGS_FB_H
-#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
-
-#include <plat/regs-fb-v4.h>
-
-/* Palette registers */
-#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2))
-#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2))
-#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2))
-#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4))
-#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4))
-
-static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
-{
- switch (window) {
- case 0: return WIN0_PAL(reg);
- case 1: return WIN1_PAL(reg);
- case 2: return WIN2_PAL(reg);
- case 3: return WIN3_PAL(reg);
- case 4: return WIN4_PAL(reg);
- }
-
- BUG();
-}
-
-#endif /* __ASM_ARCH_MACH_REGS_FB_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-
-#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-#include <plat/watchdog-reset.h>
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-static void arch_reset(char mode, const char *cmd)
-{
- if (mode != 's')
- arch_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */
+++ /dev/null
-/* arch/arm/mach-s3c6400/include/mach/uncompress.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
- /* we do not need to do any cpu detection here at the moment. */
- fifo_mask = S3C2440_UFSTAT_TXMASK;
- fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/s3c6400.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
-};
-
-static struct map_desc smdk6400_iodesc[] = {};
-
-static void __init smdk6400_map_io(void)
-{
- s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
-}
-
-static struct platform_device *smdk6400_devices[] __initdata = {
- &s3c_device_hsmmc1,
- &s3c_device_i2c0,
-};
-
-static struct i2c_board_info i2c_devs[] __initdata = {
- { I2C_BOARD_INFO("wm8753", 0x1A), },
- { I2C_BOARD_INFO("24c08", 0x50), },
-};
-
-static void __init smdk6400_machine_init(void)
-{
- i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
- platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
-}
-
-MACHINE_START(SMDK6400, "SMDK6400")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
- .phys_io = S3C_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
-
- .init_irq = s3c6400_init_irq,
- .map_io = smdk6400_map_io,
- .init_machine = smdk6400_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c6410/cpu.c
- *
- * Copyright 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-
-void __init s3c6400_map_io(void)
-{
- /* setup SDHCI */
-
- s3c6400_default_sdhci0();
- s3c6400_default_sdhci1();
- s3c6400_default_sdhci2();
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
-
- s3c_device_nand.name = "s3c6400-nand";
-}
-
-void __init s3c6400_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c24xx_register_baseclocks(xtal);
- s3c64xx_register_clocks();
- s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
-}
-
-void __init s3c6400_init_irq(void)
-{
- /* VIC0 does not have IRQS 5..7,
- * VIC1 is fully populated. */
- s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
-}
-
-struct sysdev_class s3c6400_sysclass = {
- .name = "s3c6400-core",
-};
-
-static struct sys_device s3c6400_sysdev = {
- .cls = &s3c6400_sysclass,
-};
-
-static int __init s3c6400_core_init(void)
-{
- return sysdev_class_register(&s3c6400_sysclass);
-}
-
-core_initcall(s3c6400_core_init);
-
-int __init s3c6400_init(void)
-{
- printk("S3C6400: Initialising architecture\n");
-
- return sysdev_register(&s3c6400_sysdev);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6400_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "mmc_bus",
- /* [3] = "48m", - note not successfully used yet */
-};
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
+++ /dev/null
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6410
- bool
- select CPU_S3C6400_INIT
- select CPU_S3C6400_CLOCK
- help
- Enable S3C6410 CPU support
-
-config S3C6410_SETUP_SDHCI
- bool
- select S3C64XX_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S3C6410 based SDHCI systems
-
-config MACH_ANW6410
- bool "A&W6410"
- select CPU_S3C6410
- select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
- help
- Machine support for the A&W6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- select CPU_S3C6410
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_FB
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C6410_SETUP_SDHCI
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_FB_24BPP
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- select REGULATOR
- select REGULATOR_WM8350
- select S3C24XX_GPIO_EXTRA64
- select MFD_WM8350_I2C
- select MFD_WM8350_CONFIG_MODE_0
- select MFD_WM8350_CONFIG_MODE_3
- select MFD_WM8352_CONFIG_MODE_0
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- select CPU_S3C6410
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC1
- select S3C64XX_SETUP_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- select CPU_S3C6410
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_FB_24BPP
- select HAVE_PWM
- help
- Machine support for the Airgoo HMT
+++ /dev/null
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410) += cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+++ /dev/null
-/* linux/arch/arm/mach-s3c6410/cpu.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s3c6410_map_io(void)
-{
- iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
- /* initialise device information early */
- s3c6410_default_sdhci0();
- s3c6410_default_sdhci1();
- s3c6410_default_sdhci2();
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_device_nand.name = "s3c6400-nand";
-}
-
-void __init s3c6410_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c24xx_register_baseclocks(xtal);
- s3c64xx_register_clocks();
- s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
-}
-
-void __init s3c6410_init_irq(void)
-{
- /* VIC0 is missing IRQ7, VIC1 is fully populated. */
- s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
-}
-
-struct sysdev_class s3c6410_sysclass = {
- .name = "s3c6410-core",
-};
-
-static struct sys_device s3c6410_sysdev = {
- .cls = &s3c6410_sysclass,
-};
-
-static int __init s3c6410_core_init(void)
-{
- return sysdev_class_register(&s3c6410_sysclass);
-}
-
-core_initcall(s3c6410_core_init);
-
-int __init s3c6410_init(void)
-{
- printk("S3C6410: Initialising architecture\n");
-
- return sysdev_register(&s3c6410_sysdev);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- * Copyright 2009 Kwangwoo Lee
- * Kwangwoo Lee <kwangwoo.lee@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dm9000.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-modem.h>
-
-/* DM9000 */
-#define ANW6410_PA_DM9000 (0x18000000)
-
-/* A hardware buffer to control external devices is mapped at 0x30000000.
- * It can not be read. So current status must be kept in anw6410_extdev_status.
- */
-#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
-#define ANW6410_PA_EXTDEV (0x30000000)
-
-#define ANW6410_EN_DM9000 (1<<11)
-#define ANW6410_EN_LCD (1<<14)
-
-static __u32 anw6410_extdev_status;
-
-static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
-};
-
-/* framebuffer and LCD setup. */
-static void __init anw6410_lcd_mode_set(void)
-{
- u32 tmp;
-
- /* set the LCD type */
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the LCD bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/* GPF1 = LCD panel power
- * GPF4 = LCD backlight control
- */
-static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
- __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
- gpio_direction_output(S3C64XX_GPF(1), 1);
- gpio_direction_output(S3C64XX_GPF(4), 1);
- } else {
- anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
- __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
- gpio_direction_output(S3C64XX_GPF(1), 0);
- gpio_direction_output(S3C64XX_GPF(4), 0);
- }
-}
-
-static struct plat_lcd_data anw6410_lcd_power_data = {
- .set_power = anw6410_lcd_power_set,
-};
-
-static struct platform_device anw6410_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &anw6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win anw6410_fb_win0 = {
- /* this is to ensure we use win0 */
- .win_mode = {
- .pixclock = 41094,
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .win[0] = &anw6410_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-static void __init anw6410_dm9000_enable(void)
-{
- anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
- __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-}
-
-static struct resource anw6410_dm9000_resource[] = {
- [0] = {
- .start = ANW6410_PA_DM9000,
- .end = ANW6410_PA_DM9000 + 3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ANW6410_PA_DM9000 + 4,
- .end = ANW6410_PA_DM9000 + 4 + 500,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_EINT(15),
- .end = IRQ_EINT(15),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static struct dm9000_plat_data anw6410_dm9000_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
- /* dev_addr can be set to provide hwaddr. */
-};
-
-static struct platform_device anw6410_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
- .resource = anw6410_dm9000_resource,
- .dev = {
- .platform_data = &anw6410_dm9000_pdata,
- },
-};
-
-static struct map_desc anw6410_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)ANW6410_VA_EXTDEV,
- .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
- .length = SZ_64K,
- .type = MT_DEVICE,
- },
-};
-
-static struct platform_device *anw6410_devices[] __initdata = {
- &s3c_device_fb,
- &anw6410_lcd_powerdev,
- &anw6410_device_eth,
-};
-
-static void __init anw6410_map_io(void)
-{
- s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
-
- anw6410_lcd_mode_set();
-}
-
-static void __init anw6410_machine_init(void)
-{
- s3c_fb_set_platdata(&anw6410_lcd_pdata);
-
- gpio_request(S3C64XX_GPF(1), "panel power");
- gpio_request(S3C64XX_GPF(4), "LCD backlight");
-
- anw6410_dm9000_enable();
-
- platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
-}
-
-MACHINE_START(ANW6410, "A&W6410")
- /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
- .phys_io = S3C_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
-
- .init_irq = s3c6410_init_irq,
- .map_io = anw6410_map_io,
- .init_machine = anw6410_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
+++ /dev/null
-/* mach-hmt.c - Platform code for Airgoo HMT
- *
- * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pwm_backlight.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/nand.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-static int hmt_bl_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
- if (!ret)
- ret = gpio_direction_output(S3C64XX_GPB(4), 0);
-
- return ret;
-}
-
-static int hmt_bl_notify(int brightness)
-{
- /*
- * translate from CIELUV/CIELAB L*->brightness, E.G. from
- * perceived luminance to light output. Assumes range 0..25600
- */
- if (brightness < 0x800) {
- /* Y = Yn * L / 903.3 */
- brightness = (100*256 * brightness + 231245/2) / 231245;
- } else {
- /* Y = Yn * ((L + 16) / 116 )^3 */
- int t = (brightness*4 + 16*1024 + 58)/116;
- brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
- }
-
- gpio_set_value(S3C64XX_GPB(4), brightness);
-
- return brightness;
-}
-
-static void hmt_bl_exit(struct device *dev)
-{
- gpio_free(S3C64XX_GPB(4));
-}
-
-static struct platform_pwm_backlight_data hmt_backlight_data = {
- .pwm_id = 1,
- .max_brightness = 100 * 256,
- .dft_brightness = 40 * 256,
- .pwm_period_ns = 1000000000 / (100 * 256 * 20),
- .init = hmt_bl_init,
- .notify = hmt_bl_notify,
- .exit = hmt_bl_exit,
-
-};
-
-static struct platform_device hmt_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &s3c_device_timer[1].dev,
- .platform_data = &hmt_backlight_data,
- },
-};
-
-static struct s3c_fb_pd_win hmt_fb_win0 = {
- .win_mode = {
- .pixclock = 41094,
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .win[0] = &hmt_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition hmt_nand_part[] = {
- [0] = {
- .name = "uboot",
- .size = SZ_512K,
- .offset = 0,
- },
- [1] = {
- .name = "uboot-env1",
- .size = SZ_256K,
- .offset = SZ_512K,
- },
- [2] = {
- .name = "uboot-env2",
- .size = SZ_256K,
- .offset = SZ_512K + SZ_256K,
- },
- [3] = {
- .name = "kernel",
- .size = SZ_2M,
- .offset = SZ_1M,
- },
- [4] = {
- .name = "rootfs",
- .size = MTDPART_SIZ_FULL,
- .offset = SZ_1M + SZ_2M,
- },
-};
-
-static struct s3c2410_nand_set hmt_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(hmt_nand_part),
- .partitions = hmt_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand hmt_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(hmt_nand_sets),
- .sets = hmt_nand_sets,
-};
-
-static struct gpio_led hmt_leds[] = {
- { /* left function keys */
- .name = "left:blue",
- .gpio = S3C64XX_GPO(12),
- .default_trigger = "default-on",
- },
- { /* right function keys - red */
- .name = "right:red",
- .gpio = S3C64XX_GPO(13),
- },
- { /* right function keys - green */
- .name = "right:green",
- .gpio = S3C64XX_GPO(14),
- },
- { /* right function keys - blue */
- .name = "right:blue",
- .gpio = S3C64XX_GPO(15),
- .default_trigger = "default-on",
- },
-};
-
-static struct gpio_led_platform_data hmt_led_data = {
- .num_leds = ARRAY_SIZE(hmt_leds),
- .leds = hmt_leds,
-};
-
-static struct platform_device hmt_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &hmt_led_data,
-};
-
-static struct map_desc hmt_iodesc[] = {};
-
-static struct platform_device *hmt_devices[] __initdata = {
- &s3c_device_i2c0,
- &s3c_device_nand,
- &s3c_device_fb,
- &s3c_device_ohci,
- &s3c_device_timer[1],
- &hmt_backlight_device,
- &hmt_leds_device,
-};
-
-static void __init hmt_map_io(void)
-{
- s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
-}
-
-static void __init hmt_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_fb_set_platdata(&hmt_lcd_pdata);
- s3c_nand_set_platdata(&hmt_nand_info);
-
- gpio_request(S3C64XX_GPC(7), "usb power");
- gpio_direction_output(S3C64XX_GPC(7), 0);
- gpio_request(S3C64XX_GPM(0), "usb power");
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_request(S3C64XX_GPK(7), "usb power");
- gpio_direction_output(S3C64XX_GPK(7), 1);
- gpio_request(S3C64XX_GPF(13), "usb power");
- gpio_direction_output(S3C64XX_GPF(13), 1);
-
- platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
-}
-
-MACHINE_START(HMT, "Airgoo-HMT")
- /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
- .phys_io = S3C_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
- .init_irq = s3c6410_init_irq,
- .map_io = hmt_map_io,
- .init_machine = hmt_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-s3c6410/mach-ncp.c
- *
- * Copyright (C) 2008-2009 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
- /* REVISIT: NCP uses only serial 1, 2 */
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-static struct platform_device *ncp_devices[] __initdata = {
- &s3c_device_hsmmc1,
- &s3c_device_i2c0,
-};
-
-static struct map_desc ncp_iodesc[] __initdata = {};
-
-static void __init ncp_map_io(void)
-{
- s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
-}
-
-static void __init ncp_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
-}
-
-MACHINE_START(NCP, "NCP")
- /* Maintainer: Samsung Electronics */
- .phys_io = S3C_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
- .init_irq = s3c6410_init_irq,
- .map_io = ncp_map_io,
- .init_machine = ncp_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-modem.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-srom.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- gpio_direction_output(S3C64XX_GPF(13), 1);
- gpio_direction_output(S3C64XX_GPF(15), 1);
-
- /* fire nRESET on power up */
- gpio_direction_output(S3C64XX_GPN(5), 0);
- msleep(10);
- gpio_direction_output(S3C64XX_GPN(5), 1);
- msleep(1);
- } else {
- gpio_direction_output(S3C64XX_GPF(15), 0);
- gpio_direction_output(S3C64XX_GPF(13), 0);
- }
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
- .set_power = smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
- /* this is to ensure we use win0 */
- .win_mode = {
- .pixclock = 41094,
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .win[0] = &smdk6410_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/*
- * Configuring Ethernet on SMDK6410
- *
- * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
- * The constant address below corresponds to nCS1
- *
- * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
- * 2) CFG6 needs to be switched to "LAN9115" side
- */
-
-static struct resource smdk6410_smsc911x_resources[] = {
- [0] = {
- .start = S3C64XX_PA_XM0CSN1,
- .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S3C_EINT(10),
- .end = S3C_EINT(10),
- .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
- },
-};
-
-static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device smdk6410_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
- .resource = &smdk6410_smsc911x_resources[0],
- .dev = {
- .platform_data = &smdk6410_smsc911x_pdata,
- },
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
- {
- /* WM8580 */
- .supply = "PVDD",
- .dev_name = "0-001b",
- },
- {
- /* WM8580 */
- .supply = "AVDD",
- .dev_name = "0-001b",
- },
-};
-
-static struct regulator_init_data smdk6410_b_pwr_5v_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
- .consumer_supplies = smdk6410_b_pwr_5v_consumers,
-};
-
-static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
- .supply_name = "B_PWR_5V",
- .microvolts = 5000000,
- .init_data = &smdk6410_b_pwr_5v_data,
- .gpio = -EINVAL,
-};
-
-static struct platform_device smdk6410_b_pwr_5v = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .dev = {
- .platform_data = &smdk6410_b_pwr_5v_pdata,
- },
-};
-#endif
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
- &s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
- &s3c_device_hsmmc1,
-#endif
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_fb,
- &s3c_device_ohci,
- &s3c_device_usb_hsotg,
-
-#ifdef CONFIG_REGULATOR
- &smdk6410_b_pwr_5v,
-#endif
- &smdk6410_lcd_powerdev,
-
- &smdk6410_smsc911x,
-};
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data wm8350_dcdc1_data = {
- .constraints = {
- .name = "PVDD_INT/PVDD_PLL",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .always_on = 1,
- .apply_uV = 1,
- },
-};
-
-/* Memory */
-static struct regulator_init_data wm8350_dcdc3_data = {
- .constraints = {
- .name = "PVDD_MEM",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .always_on = 1,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- },
-};
-
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
- {
- /* WM8580 */
- .supply = "DVDD",
- .dev_name = "0-001b",
- },
-};
-
-static struct regulator_init_data wm8350_dcdc4_data = {
- .constraints = {
- .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
- .consumer_supplies = wm8350_dcdc4_consumers,
-};
-
-/* ARM core */
-static struct regulator_consumer_supply dcdc6_consumers[] = {
- {
- .supply = "vddarm",
- }
-};
-
-static struct regulator_init_data wm8350_dcdc6_data = {
- .constraints = {
- .name = "PVDD_ARM",
- .min_uV = 1000000,
- .max_uV = 1300000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
- .consumer_supplies = dcdc6_consumers,
-};
-
-/* Alive */
-static struct regulator_init_data wm8350_ldo1_data = {
- .constraints = {
- .name = "PVDD_ALIVE",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .always_on = 1,
- .apply_uV = 1,
- },
-};
-
-/* OTG */
-static struct regulator_init_data wm8350_ldo2_data = {
- .constraints = {
- .name = "PVDD_OTG",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .always_on = 1,
- },
-};
-
-/* LCD */
-static struct regulator_init_data wm8350_ldo3_data = {
- .constraints = {
- .name = "PVDD_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .always_on = 1,
- },
-};
-
-/* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data wm8350_ldo4_data = {
- .constraints = {
- .name = "PVDD_OTGI/HPVDD/AVDD",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct {
- int regulator;
- struct regulator_init_data *initdata;
-} wm1190_regulators[] = {
- { WM8350_DCDC_1, &wm8350_dcdc1_data },
- { WM8350_DCDC_3, &wm8350_dcdc3_data },
- { WM8350_DCDC_4, &wm8350_dcdc4_data },
- { WM8350_DCDC_6, &wm8350_dcdc6_data },
- { WM8350_LDO_1, &wm8350_ldo1_data },
- { WM8350_LDO_2, &wm8350_ldo2_data },
- { WM8350_LDO_3, &wm8350_ldo3_data },
- { WM8350_LDO_4, &wm8350_ldo4_data },
-};
-
-static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
-{
- int i;
-
- /* Configure the IRQ line */
- s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
- /* Instantiate the regulators */
- for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
- wm8350_register_regulator(wm8350,
- wm1190_regulators[i].regulator,
- wm1190_regulators[i].initdata);
-
- return 0;
-}
-
-static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
- .init = smdk6410_wm8350_init,
- .irq_high = 1,
- .irq_base = IRQ_BOARD_START,
-};
-#endif
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
- { I2C_BOARD_INFO("wm8350", 0x1a),
- .platform_data = &smdk6410_wm8350_pdata,
- .irq = S3C_EINT(12),
- },
-#endif
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
-};
-
-static void __init smdk6410_map_io(void)
-{
- u32 tmp;
-
- s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
-
- /* set the LCD type */
-
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the lcd bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void __init smdk6410_machine_init(void)
-{
- u32 cs1;
-
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-
- /* configure nCS1 width to 16 bits */
-
- cs1 = __raw_readl(S3C64XX_SROM_BW) &
- ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
- S3C64XX_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S3C64XX_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
-
- __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
- (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
- (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
- (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
- (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
- gpio_request(S3C64XX_GPN(5), "LCD power");
- gpio_request(S3C64XX_GPF(13), "LCD power");
- gpio_request(S3C64XX_GPF(15), "LCD power");
-
- i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
- .phys_io = S3C_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
-
- .init_irq = s3c6410_init_irq,
- .map_io = smdk6410_map_io,
- .init_machine = smdk6410_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "mmc_bus",
- /* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything acording to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
--- /dev/null
+# Copyright 2008 Openmoko, Inc.
+# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+ bool
+ select CPU_S3C6400_INIT
+ select CPU_S3C6400_CLOCK
+ help
+ Enable S3C6400 CPU support
+
+config CPU_S3C6410
+ bool
+ select CPU_S3C6400_INIT
+ select CPU_S3C6400_CLOCK
+ help
+ Enable S3C6410 CPU support
+
+config S3C6400_SETUP_SDHCI
+ bool
+ help
+ Internal configuration for default SDHCI
+ setup for S3C6400.
+
+config S3C6410_SETUP_SDHCI
+ bool
+ select S3C64XX_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S3C6410 based SDHCI systems
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+ bool "SMDK6400"
+ select CPU_S3C6400
+ select S3C_DEV_HSMMC
+ select S3C_DEV_NAND
+ select S3C6400_SETUP_SDHCI
+ help
+ Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+ bool "A&W6410"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the A&W6410
+
+config MACH_SMDK6410
+ bool "SMDK6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
+ select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C6410_SETUP_SDHCI
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+ prompt "SMDK6410 MMC/SD slot setup"
+ depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+ bool "Use channel 0 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON7 (channel 0) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+ bool "Use channel 1 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON6 (channel 1) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+ bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM8350
+ select S3C24XX_GPIO_EXTRA64
+ select MFD_WM8350_I2C
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+ and audio daughtercard for the Samsung SMDK6410 reference
+ platform. Enabling this option will build support for this
+ module into the kernel. The presence of the module will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+ bool "NCP"
+ select CPU_S3C6410
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_I2C1
+ help
+ Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select S3C64XX_SETUP_FB_24BPP
+ select HAVE_PWM
+ help
+ Machine support for the Airgoo HMT
--- /dev/null
+# arch/arm/mach-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S3C6400 system
+
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci-s3c6400.o
+obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci-s3c6410.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
--- /dev/null
+ zreladdr-y := 0x50008000
+params_phys-y := 0x50000100
--- /dev/null
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS (16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+ /* DMA0/SDMA0 */
+ DMACH_UART0 = 0,
+ DMACH_UART0_SRC2,
+ DMACH_UART1,
+ DMACH_UART1_SRC2,
+ DMACH_UART2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3,
+ DMACH_UART3_SRC2,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_OUT,
+ DMACH_I2S0_IN,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_HSI_I2SV40_TX,
+ DMACH_HSI_I2SV40_RX,
+
+ /* DMA1/SDMA1 */
+ DMACH_PCM1_TX = 16,
+ DMACH_PCM1_RX,
+ DMACH_I2S1_OUT,
+ DMACH_I2S1_IN,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_AC97_PCMOUT,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_MICIN,
+ DMACH_PWM,
+ DMACH_IRDA,
+ DMACH_EXTERNAL,
+ DMACH_RES1,
+ DMACH_RES2,
+ DMACH_SECURITY_RX, /* SDMA1 only */
+ DMACH_SECURITY_TX, /* SDMA1 only */
+ DMACH_MAX /* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+ return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR (1 << 0)
+
+#include <plat/dma.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
--- /dev/null
+/* arch/arm/mach-s3c6400/include/mach/gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR (8)
+#define S3C64XX_GPIO_B_NR (7)
+#define S3C64XX_GPIO_C_NR (8)
+#define S3C64XX_GPIO_D_NR (5)
+#define S3C64XX_GPIO_E_NR (5)
+#define S3C64XX_GPIO_F_NR (16)
+#define S3C64XX_GPIO_G_NR (7)
+#define S3C64XX_GPIO_H_NR (10)
+#define S3C64XX_GPIO_I_NR (16)
+#define S3C64XX_GPIO_J_NR (12)
+#define S3C64XX_GPIO_K_NR (16)
+#define S3C64XX_GPIO_L_NR (15)
+#define S3C64XX_GPIO_M_NR (6)
+#define S3C64XX_GPIO_N_NR (16)
+#define S3C64XX_GPIO_O_NR (16)
+#define S3C64XX_GPIO_P_NR (15)
+#define S3C64XX_GPIO_Q_NR (9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S3C64XX_GPIO_A_START = 0,
+ S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+ S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+ S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+ S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+ S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+ S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+ S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+ S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+ S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+ S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+ S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+ S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+ S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+ S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+ S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+ S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#include <asm-generic/gpio.h>
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART (0x7F005000)
+#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
+#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
+#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
+#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET (0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0 S3C_VA_UARTx(0)
+#define S3C_VA_UART1 S3C_VA_UARTx(1)
+#define S3C_VA_UART2 S3C_VA_UARTx(2)
+#define S3C_VA_UART3 S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM (0x70000000)
+
+#define S3C64XX_PA_NAND (0x70200000)
+#define S3C64XX_PA_FB (0x77100000)
+#define S3C64XX_PA_USB_HSOTG (0x7C000000)
+#define S3C64XX_PA_WATCHDOG (0x7E004000)
+#define S3C64XX_PA_RTC (0x7E005000)
+#define S3C64XX_PA_ADC (0x7E00B000)
+#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_AC97 (0x7F001000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
+#define S3C64XX_PA_TIMER (0x7F006000)
+#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_SPI0 (0x7F00B000)
+#define S3C64XX_PA_SPI1 (0x7F00C000)
+#define S3C64XX_PA_PCM0 (0x7F009000)
+#define S3C64XX_PA_PCM1 (0x7F00A000)
+#define S3C64XX_PA_IISV4 (0x7F00D000)
+#define S3C64XX_PA_IIC1 (0x7F00F000)
+
+#define S3C64XX_PA_GPIO (0x7F008000)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+#define S3C64XX_SZ_GPIO SZ_4K
+
+#define S3C64XX_PA_SDRAM (0x50000000)
+#define S3C64XX_PA_VIC0 (0x71200000)
+#define S3C64XX_PA_VIC1 (0x71300000)
+
+#define S3C64XX_PA_MODEM (0x74108000)
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+
+#define S3C64XX_PA_USBHOST (0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY (0x7C100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+/* place VICs close together */
+#define VA_VIC0 (S3C_VA_IRQ + 0x00)
+#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC S3C64XX_PA_IIC0
+#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_NAND S3C64XX_PA_NAND
+#define S3C_PA_FB S3C64XX_PA_FB
+#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+#endif /* __ASM_ARCH_6400_MAP_H */
--- /dev/null
+/* arch/arm/mach-s3c6400/include/mach/memory.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x50000000)
+
+#endif
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
--- /dev/null
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
+ *
+ * Framebuffer register definitions for Samsung S3C64xx.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* Palette registers */
+#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2))
+#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2))
+#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2))
+#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4))
+#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+ switch (window) {
+ case 0: return WIN0_PAL(reg);
+ case 1: return WIN1_PAL(reg);
+ case 2: return WIN2_PAL(reg);
+ case 3: return WIN3_PAL(reg);
+ case 4: return WIN4_PAL(reg);
+ }
+
+ BUG();
+}
+
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/system.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - system implementation
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/watchdog-reset.h>
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ /* if all else fails, or mode was for soft, jump to 0 */
+ cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_6400_TICK_H */
--- /dev/null
+/* arch/arm/mach-s3c6400/include/mach/uncompress.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+ fifo_mask = S3C2440_UFSTAT_TXMASK;
+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000 (0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV (0x30000000)
+
+#define ANW6410_EN_DM9000 (1<<11)
+#define ANW6410_EN_LCD (1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+ u32 tmp;
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 1);
+ gpio_direction_output(S3C64XX_GPF(4), 1);
+ } else {
+ anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 0);
+ gpio_direction_output(S3C64XX_GPF(4), 0);
+ }
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+ .set_power = anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &anw6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+ anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+ [0] = {
+ .start = ANW6410_PA_DM9000,
+ .end = ANW6410_PA_DM9000 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ANW6410_PA_DM9000 + 4,
+ .end = ANW6410_PA_DM9000 + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT(15),
+ .end = IRQ_EINT(15),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+ /* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
+ .resource = anw6410_dm9000_resource,
+ .dev = {
+ .platform_data = &anw6410_dm9000_pdata,
+ },
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)ANW6410_VA_EXTDEV,
+ .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+ &s3c_device_fb,
+ &anw6410_lcd_powerdev,
+ &anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+ s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+ anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+ s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+ gpio_request(S3C64XX_GPF(1), "panel power");
+ gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+ anw6410_dm9000_enable();
+
+ platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+ /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6410_init_irq,
+ .map_io = anw6410_map_io,
+ .init_machine = anw6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+ if (!ret)
+ ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+ return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+ /*
+ * translate from CIELUV/CIELAB L*->brightness, E.G. from
+ * perceived luminance to light output. Assumes range 0..25600
+ */
+ if (brightness < 0x800) {
+ /* Y = Yn * L / 903.3 */
+ brightness = (100*256 * brightness + 231245/2) / 231245;
+ } else {
+ /* Y = Yn * ((L + 16) / 116 )^3 */
+ int t = (brightness*4 + 16*1024 + 58)/116;
+ brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+ }
+
+ gpio_set_value(S3C64XX_GPB(4), brightness);
+
+ return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+ gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 100 * 256,
+ .dft_brightness = 40 * 256,
+ .pwm_period_ns = 1000000000 / (100 * 256 * 20),
+ .init = hmt_bl_init,
+ .notify = hmt_bl_notify,
+ .exit = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[1].dev,
+ .platform_data = &hmt_backlight_data,
+ },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &hmt_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "uboot-env1",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+ [2] = {
+ .name = "uboot-env2",
+ .size = SZ_256K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [4] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(hmt_nand_part),
+ .partitions = hmt_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(hmt_nand_sets),
+ .sets = hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+ { /* left function keys */
+ .name = "left:blue",
+ .gpio = S3C64XX_GPO(12),
+ .default_trigger = "default-on",
+ },
+ { /* right function keys - red */
+ .name = "right:red",
+ .gpio = S3C64XX_GPO(13),
+ },
+ { /* right function keys - green */
+ .name = "right:green",
+ .gpio = S3C64XX_GPO(14),
+ },
+ { /* right function keys - blue */
+ .name = "right:blue",
+ .gpio = S3C64XX_GPO(15),
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+ .num_leds = ARRAY_SIZE(hmt_leds),
+ .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &s3c_device_timer[1],
+ &hmt_backlight_device,
+ &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+ s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&hmt_lcd_pdata);
+ s3c_nand_set_platdata(&hmt_nand_info);
+
+ gpio_request(S3C64XX_GPC(7), "usb power");
+ gpio_direction_output(S3C64XX_GPC(7), 0);
+ gpio_request(S3C64XX_GPM(0), "usb power");
+ gpio_direction_output(S3C64XX_GPM(0), 1);
+ gpio_request(S3C64XX_GPK(7), "usb power");
+ gpio_direction_output(S3C64XX_GPK(7), 1);
+ gpio_request(S3C64XX_GPF(13), "usb power");
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+
+ platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+ /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = hmt_map_io,
+ .init_machine = hmt_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+ /* REVISIT: NCP uses only serial 1, 2 */
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+static struct map_desc ncp_iodesc[] __initdata = {};
+
+static void __init ncp_map_io(void)
+{
+ s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+ /* Maintainer: Samsung Electronics */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = ncp_map_io,
+ .init_machine = ncp_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+ s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8753", 0x1A), },
+ { I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+ i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+ platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6400_init_irq,
+ .map_io = smdk6400_map_io,
+ .init_machine = smdk6400_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-srom.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+ gpio_direction_output(S3C64XX_GPF(15), 1);
+
+ /* fire nRESET on power up */
+ gpio_direction_output(S3C64XX_GPN(5), 0);
+ msleep(10);
+ gpio_direction_output(S3C64XX_GPN(5), 1);
+ msleep(1);
+ } else {
+ gpio_direction_output(S3C64XX_GPF(15), 0);
+ gpio_direction_output(S3C64XX_GPF(13), 0);
+ }
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+ .set_power = smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &smdk6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ * 2) CFG6 needs to be switched to "LAN9115" side
+ */
+
+static struct resource smdk6410_smsc911x_resources[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN1,
+ .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C_EINT(10),
+ .end = S3C_EINT(10),
+ .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+ .resource = &smdk6410_smsc911x_resources[0],
+ .dev = {
+ .platform_data = &smdk6410_smsc911x_pdata,
+ },
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+ {
+ /* WM8580 */
+ .supply = "PVDD",
+ .dev_name = "0-001b",
+ },
+ {
+ /* WM8580 */
+ .supply = "AVDD",
+ .dev_name = "0-001b",
+ },
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+ .consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+ .supply_name = "B_PWR_5V",
+ .microvolts = 5000000,
+ .init_data = &smdk6410_b_pwr_5v_data,
+ .gpio = -EINVAL,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &smdk6410_b_pwr_5v_pdata,
+ },
+};
+#endif
+
+static struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+ &s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+ &s3c_device_hsmmc1,
+#endif
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+ &smdk6410_b_pwr_5v,
+#endif
+ &smdk6410_lcd_powerdev,
+
+ &smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+ .constraints = {
+ .name = "PVDD_INT/PVDD_PLL",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+ .constraints = {
+ .name = "PVDD_MEM",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+ {
+ /* WM8580 */
+ .supply = "DVDD",
+ .dev_name = "0-001b",
+ },
+};
+
+static struct regulator_init_data wm8350_dcdc4_data = {
+ .constraints = {
+ .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+ .consumer_supplies = wm8350_dcdc4_consumers,
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+ {
+ .supply = "vddarm",
+ }
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+ .constraints = {
+ .name = "PVDD_ARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+ .consumer_supplies = dcdc6_consumers,
+};
+
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+ .constraints = {
+ .name = "PVDD_ALIVE",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+ .constraints = {
+ .name = "PVDD_OTG",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+ .constraints = {
+ .name = "PVDD_LCD",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+ .constraints = {
+ .name = "PVDD_OTGI/HPVDD/AVDD",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct {
+ int regulator;
+ struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+ { WM8350_DCDC_1, &wm8350_dcdc1_data },
+ { WM8350_DCDC_3, &wm8350_dcdc3_data },
+ { WM8350_DCDC_4, &wm8350_dcdc4_data },
+ { WM8350_DCDC_6, &wm8350_dcdc6_data },
+ { WM8350_LDO_1, &wm8350_ldo1_data },
+ { WM8350_LDO_2, &wm8350_ldo2_data },
+ { WM8350_LDO_3, &wm8350_ldo3_data },
+ { WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+ int i;
+
+ /* Configure the IRQ line */
+ s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+ /* Instantiate the regulators */
+ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+ wm8350_register_regulator(wm8350,
+ wm1190_regulators[i].regulator,
+ wm1190_regulators[i].initdata);
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+ .init = smdk6410_wm8350_init,
+ .irq_high = 1,
+ .irq_base = IRQ_BOARD_START,
+};
+#endif
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+ { I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &smdk6410_wm8350_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
+};
+
+static void __init smdk6410_map_io(void)
+{
+ u32 tmp;
+
+ s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+ /* set the LCD type */
+
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the lcd bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void __init smdk6410_machine_init(void)
+{
+ u32 cs1;
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ gpio_request(S3C64XX_GPN(5), "LCD power");
+ gpio_request(S3C64XX_GPF(13), "LCD power");
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6410_init_irq,
+ .map_io = smdk6410_map_io,
+ .init_machine = smdk6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+ /* setup SDHCI */
+
+ s3c6400_default_sdhci0();
+ s3c6400_default_sdhci1();
+ s3c6400_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s3c64xx_register_clocks();
+ s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+ s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+ /* VIC0 does not have IRQS 5..7,
+ * VIC1 is fully populated. */
+ s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+ .name = "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+ .cls = &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+ return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+ printk("S3C6400: Initialising architecture\n");
+
+ return sysdev_register(&s3c6400_sysdev);
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s3c6410_iodesc[] __initdata = {
+};
+
+/* s3c6410_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s3c6410_map_io(void)
+{
+ iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
+
+ /* initialise device information early */
+ s3c6410_default_sdhci0();
+ s3c6410_default_sdhci1();
+ s3c6410_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
+}
+
+void __init s3c6410_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s3c64xx_register_clocks();
+ s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
+ s3c6400_setup_clocks();
+}
+
+void __init s3c6410_init_irq(void)
+{
+ /* VIC0 is missing IRQ7, VIC1 is fully populated. */
+ s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct sysdev_class s3c6410_sysclass = {
+ .name = "s3c6410-core",
+};
+
+static struct sys_device s3c6410_sysdev = {
+ .cls = &s3c6410_sysclass,
+};
+
+static int __init s3c6410_core_init(void)
+{
+ return sysdev_class_register(&s3c6410_sysclass);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+ printk("S3C6410: Initialising architecture\n");
+
+ return sysdev_register(&s3c6410_sysdev);
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ [2] = "mmc_bus",
+ /* [3] = "48m", - note not successfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6410_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ [2] = "mmc_bus",
+ /* [3] = "48m", - note not successfully used yet */
+};
+
+
+void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
projects / linux-2.6-block.git / commitdiff