sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
-# is .cfi_signal_frame supported too?
-cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
-
# does binutils support specific instructions?
asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
LDFLAGS := -m elf_$(UTS_MACHINE)
* Copyright 2000-2002 Andi Kleen, SuSE Labs.
*/
-#include <asm/dwarf2.h>
#include <asm/calling.h>
#include <asm/asm-offsets.h>
#include <asm/current.h>
movl %eax,%eax /* zero extension */
.endm
- .macro CFI_STARTPROC32 simple
- CFI_STARTPROC \simple
- CFI_UNDEFINED r8
- CFI_UNDEFINED r9
- CFI_UNDEFINED r10
- CFI_UNDEFINED r11
- CFI_UNDEFINED r12
- CFI_UNDEFINED r13
- CFI_UNDEFINED r14
- CFI_UNDEFINED r15
- .endm
#ifdef CONFIG_PARAVIRT
ENTRY(native_usergs_sysret32)
* with the int 0x80 path.
*/
ENTRY(ia32_sysenter_target)
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,0
- CFI_REGISTER rsp,rbp
-
/*
* Interrupts are off on entry.
* We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
movl %eax, %eax
movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
- CFI_REGISTER rip,r10
/* Construct struct pt_regs on stack */
- pushq_cfi $__USER32_DS /* pt_regs->ss */
- pushq_cfi %rbp /* pt_regs->sp */
- CFI_REL_OFFSET rsp,0
- pushfq_cfi /* pt_regs->flags */
- pushq_cfi $__USER32_CS /* pt_regs->cs */
- pushq_cfi %r10 /* pt_regs->ip = thread_info->sysenter_return */
- CFI_REL_OFFSET rip,0
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rcx /* pt_regs->cx */
- pushq_cfi $-ENOSYS /* pt_regs->ax */
+ pushq $__USER32_DS /* pt_regs->ss */
+ pushq %rbp /* pt_regs->sp */
+ pushfq /* pt_regs->flags */
+ pushq $__USER32_CS /* pt_regs->cs */
+ pushq %r10 /* pt_regs->ip = thread_info->sysenter_return */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
cld
sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 10*8
/*
* no need to do an access_ok check here because rbp has been
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- CFI_REMEMBER_STATE
jnz sysenter_tracesys
+
sysenter_do_call:
/* 32bit syscall -> 64bit C ABI argument conversion */
movl %edi,%r8d /* arg5 */
*/
andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
movl RIP(%rsp),%ecx /* User %eip */
- CFI_REGISTER rip,rcx
RESTORE_RSI_RDI
xorl %edx,%edx /* avoid info leaks */
xorq %r8,%r8
xorq %r9,%r9
xorq %r10,%r10
movl EFLAGS(%rsp),%r11d /* User eflags */
- /*CFI_RESTORE rflags*/
TRACE_IRQS_ON
/*
*/
USERGS_SYSRET32
- CFI_RESTORE_STATE
-
#ifdef CONFIG_AUDITSYSCALL
.macro auditsys_entry_common
movl %esi,%r8d /* 5th arg: 4th syscall arg */
#endif
sysenter_fix_flags:
- pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
- popfq_cfi
+ pushq $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
+ popfq
jmp sysenter_flags_fixed
sysenter_tracesys:
LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
jmp sysenter_do_call
- CFI_ENDPROC
ENDPROC(ia32_sysenter_target)
/*
* with the int 0x80 path.
*/
ENTRY(ia32_cstar_target)
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,0
- CFI_REGISTER rip,rcx
- /*CFI_REGISTER rflags,r11*/
-
/*
* Interrupts are off on entry.
* We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
*/
SWAPGS_UNSAFE_STACK
movl %esp,%r8d
- CFI_REGISTER rsp,r8
movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp
ENABLE_INTERRUPTS(CLBR_NONE)
movl %eax,%eax
/* Construct struct pt_regs on stack */
- pushq_cfi $__USER32_DS /* pt_regs->ss */
- pushq_cfi %r8 /* pt_regs->sp */
- CFI_REL_OFFSET rsp,0
- pushq_cfi %r11 /* pt_regs->flags */
- pushq_cfi $__USER32_CS /* pt_regs->cs */
- pushq_cfi %rcx /* pt_regs->ip */
- CFI_REL_OFFSET rip,0
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rbp /* pt_regs->cx */
+ pushq $__USER32_DS /* pt_regs->ss */
+ pushq %r8 /* pt_regs->sp */
+ pushq %r11 /* pt_regs->flags */
+ pushq $__USER32_CS /* pt_regs->cs */
+ pushq %rcx /* pt_regs->ip */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rbp /* pt_regs->cx */
movl %ebp,%ecx
- pushq_cfi $-ENOSYS /* pt_regs->ax */
+ pushq $-ENOSYS /* pt_regs->ax */
sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 10*8
/*
* no need to do an access_ok check here because r8 has been
ASM_CLAC
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- CFI_REMEMBER_STATE
jnz cstar_tracesys
+
cstar_do_call:
/* 32bit syscall -> 64bit C ABI argument conversion */
movl %edi,%r8d /* arg5 */
andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
RESTORE_RSI_RDI_RDX
movl RIP(%rsp),%ecx
- CFI_REGISTER rip,rcx
movl EFLAGS(%rsp),%r11d
- /*CFI_REGISTER rflags,r11*/
xorq %r10,%r10
xorq %r9,%r9
xorq %r8,%r8
TRACE_IRQS_ON
movl RSP(%rsp),%esp
- CFI_RESTORE rsp
/*
* 64bit->32bit SYSRET restores eip from ecx,
* eflags from r11 (but RF and VM bits are forced to 0),
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
- CFI_RESTORE_STATE
movl %r9d,R9(%rsp) /* register to be clobbered by call */
auditsys_entry_common
movl R9(%rsp),%r9d /* reload 6th syscall arg */
ASM_CLAC
movq $-EFAULT,%rax
jmp ia32_sysret
- CFI_ENDPROC
/*
* Emulated IA32 system calls via int 0x80.
*/
ENTRY(ia32_syscall)
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,5*8
- /*CFI_REL_OFFSET ss,4*8 */
- CFI_REL_OFFSET rsp,3*8
- /*CFI_REL_OFFSET rflags,2*8 */
- /*CFI_REL_OFFSET cs,1*8 */
- CFI_REL_OFFSET rip,0*8
-
/*
* Interrupts are off on entry.
* We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
movl %eax,%eax
/* Construct struct pt_regs on stack (iret frame is already on stack) */
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rcx /* pt_regs->cx */
- pushq_cfi $-ENOSYS /* pt_regs->ax */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
cld
sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 10*8
orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
jmp ia32_do_call
- CFI_ENDPROC
END(ia32_syscall)
.macro PTREGSCALL label, func
jmp ia32_ptregs_common
.endm
- CFI_STARTPROC32
-
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
PTREGSCALL stub32_sigreturn, sys32_sigreturn
PTREGSCALL stub32_fork, sys_fork
ALIGN
ia32_ptregs_common:
- CFI_ENDPROC
- CFI_STARTPROC32 simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,SIZEOF_PTREGS
- CFI_REL_OFFSET rax,RAX
- CFI_REL_OFFSET rcx,RCX
- CFI_REL_OFFSET rdx,RDX
- CFI_REL_OFFSET rsi,RSI
- CFI_REL_OFFSET rdi,RDI
- CFI_REL_OFFSET rip,RIP
-/* CFI_REL_OFFSET cs,CS*/
-/* CFI_REL_OFFSET rflags,EFLAGS*/
- CFI_REL_OFFSET rsp,RSP
-/* CFI_REL_OFFSET ss,SS*/
SAVE_EXTRA_REGS 8
call *%rax
RESTORE_EXTRA_REGS 8
ret
- CFI_ENDPROC
END(ia32_ptregs_common)
*/
-#include <asm/dwarf2.h>
-
#ifdef CONFIG_X86_64
/*
.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
subq $15*8+\addskip, %rsp
- CFI_ADJUST_CFA_OFFSET 15*8+\addskip
.endm
.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
.if \r11
- movq_cfi r11, 6*8+\offset
+ movq %r11, 6*8+\offset(%rsp)
.endif
.if \r8910
- movq_cfi r10, 7*8+\offset
- movq_cfi r9, 8*8+\offset
- movq_cfi r8, 9*8+\offset
+ movq %r10, 7*8+\offset(%rsp)
+ movq %r9, 8*8+\offset(%rsp)
+ movq %r8, 9*8+\offset(%rsp)
.endif
.if \rax
- movq_cfi rax, 10*8+\offset
+ movq %rax, 10*8+\offset(%rsp)
.endif
.if \rcx
- movq_cfi rcx, 11*8+\offset
+ movq %rcx, 11*8+\offset(%rsp)
.endif
- movq_cfi rdx, 12*8+\offset
- movq_cfi rsi, 13*8+\offset
- movq_cfi rdi, 14*8+\offset
+ movq %rdx, 12*8+\offset(%rsp)
+ movq %rsi, 13*8+\offset(%rsp)
+ movq %rdi, 14*8+\offset(%rsp)
.endm
.macro SAVE_C_REGS offset=0
SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
.endm
.macro SAVE_EXTRA_REGS offset=0
- movq_cfi r15, 0*8+\offset
- movq_cfi r14, 1*8+\offset
- movq_cfi r13, 2*8+\offset
- movq_cfi r12, 3*8+\offset
- movq_cfi rbp, 4*8+\offset
- movq_cfi rbx, 5*8+\offset
+ movq %r15, 0*8+\offset(%rsp)
+ movq %r14, 1*8+\offset(%rsp)
+ movq %r13, 2*8+\offset(%rsp)
+ movq %r12, 3*8+\offset(%rsp)
+ movq %rbp, 4*8+\offset(%rsp)
+ movq %rbx, 5*8+\offset(%rsp)
.endm
.macro SAVE_EXTRA_REGS_RBP offset=0
- movq_cfi rbp, 4*8+\offset
+ movq %rbp, 4*8+\offset(%rsp)
.endm
.macro RESTORE_EXTRA_REGS offset=0
- movq_cfi_restore 0*8+\offset, r15
- movq_cfi_restore 1*8+\offset, r14
- movq_cfi_restore 2*8+\offset, r13
- movq_cfi_restore 3*8+\offset, r12
- movq_cfi_restore 4*8+\offset, rbp
- movq_cfi_restore 5*8+\offset, rbx
+ movq 0*8+\offset(%rsp), %r15
+ movq 1*8+\offset(%rsp), %r14
+ movq 2*8+\offset(%rsp), %r13
+ movq 3*8+\offset(%rsp), %r12
+ movq 4*8+\offset(%rsp), %rbp
+ movq 5*8+\offset(%rsp), %rbx
.endm
.macro ZERO_EXTRA_REGS
.macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1
.if \rstor_r11
- movq_cfi_restore 6*8, r11
+ movq 6*8(%rsp), %r11
.endif
.if \rstor_r8910
- movq_cfi_restore 7*8, r10
- movq_cfi_restore 8*8, r9
- movq_cfi_restore 9*8, r8
+ movq 7*8(%rsp), %r10
+ movq 8*8(%rsp), %r9
+ movq 9*8(%rsp), %r8
.endif
.if \rstor_rax
- movq_cfi_restore 10*8, rax
+ movq 10*8(%rsp), %rax
.endif
.if \rstor_rcx
- movq_cfi_restore 11*8, rcx
+ movq 11*8(%rsp), %rcx
.endif
.if \rstor_rdx
- movq_cfi_restore 12*8, rdx
+ movq 12*8(%rsp), %rdx
.endif
- movq_cfi_restore 13*8, rsi
- movq_cfi_restore 14*8, rdi
+ movq 13*8(%rsp), %rsi
+ movq 14*8(%rsp), %rdi
.endm
.macro RESTORE_C_REGS
RESTORE_C_REGS_HELPER 1,1,1,1,1
.macro REMOVE_PT_GPREGS_FROM_STACK addskip=0
addq $15*8+\addskip, %rsp
- CFI_ADJUST_CFA_OFFSET -(15*8+\addskip)
.endm
.macro icebp
*/
.macro SAVE_ALL
- pushl_cfi_reg eax
- pushl_cfi_reg ebp
- pushl_cfi_reg edi
- pushl_cfi_reg esi
- pushl_cfi_reg edx
- pushl_cfi_reg ecx
- pushl_cfi_reg ebx
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
.endm
.macro RESTORE_ALL
- popl_cfi_reg ebx
- popl_cfi_reg ecx
- popl_cfi_reg edx
- popl_cfi_reg esi
- popl_cfi_reg edi
- popl_cfi_reg ebp
- popl_cfi_reg eax
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
.endm
#endif /* CONFIG_X86_64 */
+++ /dev/null
-#ifndef _ASM_X86_DWARF2_H
-#define _ASM_X86_DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
-#define CFI_ESCAPE .cfi_escape
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
- /*
- * Emit CFI data in .debug_frame sections, not .eh_frame sections.
- * The latter we currently just discard since we don't do DWARF
- * unwinding at runtime. So only the offline DWARF information is
- * useful to anyone. Note we should not use this directive if this
- * file is used in the vDSO assembly, or if vmlinux.lds.S gets
- * changed so it doesn't discard .eh_frame.
- */
- .cfi_sections .debug_frame
-#endif
-
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC cfi_ignore
-#define CFI_ENDPROC cfi_ignore
-#define CFI_DEF_CFA cfi_ignore
-#define CFI_DEF_CFA_REGISTER cfi_ignore
-#define CFI_DEF_CFA_OFFSET cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET cfi_ignore
-#define CFI_OFFSET cfi_ignore
-#define CFI_REL_OFFSET cfi_ignore
-#define CFI_REGISTER cfi_ignore
-#define CFI_RESTORE cfi_ignore
-#define CFI_REMEMBER_STATE cfi_ignore
-#define CFI_RESTORE_STATE cfi_ignore
-#define CFI_UNDEFINED cfi_ignore
-#define CFI_ESCAPE cfi_ignore
-#define CFI_SIGNAL_FRAME cfi_ignore
-
-#endif
-
-/*
- * An attempt to make CFI annotations more or less
- * correct and shorter. It is implied that you know
- * what you're doing if you use them.
- */
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_X86_64
- .macro pushq_cfi reg
- pushq \reg
- CFI_ADJUST_CFA_OFFSET 8
- .endm
-
- .macro pushq_cfi_reg reg
- pushq %\reg
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET \reg, 0
- .endm
-
- .macro popq_cfi reg
- popq \reg
- CFI_ADJUST_CFA_OFFSET -8
- .endm
-
- .macro popq_cfi_reg reg
- popq %\reg
- CFI_ADJUST_CFA_OFFSET -8
- CFI_RESTORE \reg
- .endm
-
- .macro pushfq_cfi
- pushfq
- CFI_ADJUST_CFA_OFFSET 8
- .endm
-
- .macro popfq_cfi
- popfq
- CFI_ADJUST_CFA_OFFSET -8
- .endm
-
- .macro movq_cfi reg offset=0
- movq %\reg, \offset(%rsp)
- CFI_REL_OFFSET \reg, \offset
- .endm
-
- .macro movq_cfi_restore offset reg
- movq \offset(%rsp), %\reg
- CFI_RESTORE \reg
- .endm
-#else /*!CONFIG_X86_64*/
- .macro pushl_cfi reg
- pushl \reg
- CFI_ADJUST_CFA_OFFSET 4
- .endm
-
- .macro pushl_cfi_reg reg
- pushl %\reg
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET \reg, 0
- .endm
-
- .macro popl_cfi reg
- popl \reg
- CFI_ADJUST_CFA_OFFSET -4
- .endm
-
- .macro popl_cfi_reg reg
- popl %\reg
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE \reg
- .endm
-
- .macro pushfl_cfi
- pushfl
- CFI_ADJUST_CFA_OFFSET 4
- .endm
-
- .macro popfl_cfi
- popfl
- CFI_ADJUST_CFA_OFFSET -4
- .endm
-
- .macro movl_cfi reg offset=0
- movl %\reg, \offset(%esp)
- CFI_REL_OFFSET \reg, \offset
- .endm
-
- .macro movl_cfi_restore offset reg
- movl \offset(%esp), %\reg
- CFI_RESTORE \reg
- .endm
-#endif /*!CONFIG_X86_64*/
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASM_X86_DWARF2_H */
#ifdef __ASSEMBLY__
#include <asm/asm.h>
-#include <asm/dwarf2.h>
/* The annotation hides the frame from the unwinder and makes it look
like a ordinary ebp save/restore. This avoids some special cases for
frame pointer later */
#ifdef CONFIG_FRAME_POINTER
.macro FRAME
- __ASM_SIZE(push,_cfi) %__ASM_REG(bp)
- CFI_REL_OFFSET __ASM_REG(bp), 0
+ __ASM_SIZE(push,) %__ASM_REG(bp)
__ASM_SIZE(mov) %__ASM_REG(sp), %__ASM_REG(bp)
.endm
.macro ENDFRAME
- __ASM_SIZE(pop,_cfi) %__ASM_REG(bp)
- CFI_RESTORE __ASM_REG(bp)
+ __ASM_SIZE(pop,) %__ASM_REG(bp)
.endm
#else
.macro FRAME
#include <asm/smp.h>
#include <asm/page_types.h>
#include <asm/percpu.h>
-#include <asm/dwarf2.h>
#include <asm/processor-flags.h>
#include <asm/ftrace.h>
#include <asm/irq_vectors.h>
/* unfortunately push/pop can't be no-op */
.macro PUSH_GS
- pushl_cfi $0
+ pushl $0
.endm
.macro POP_GS pop=0
addl $(4 + \pop), %esp
- CFI_ADJUST_CFA_OFFSET -(4 + \pop)
.endm
.macro POP_GS_EX
.endm
#else /* CONFIG_X86_32_LAZY_GS */
.macro PUSH_GS
- pushl_cfi %gs
- /*CFI_REL_OFFSET gs, 0*/
+ pushl %gs
.endm
.macro POP_GS pop=0
-98: popl_cfi %gs
- /*CFI_RESTORE gs*/
+98: popl %gs
.if \pop <> 0
add $\pop, %esp
- CFI_ADJUST_CFA_OFFSET -\pop
.endif
.endm
.macro POP_GS_EX
.macro GS_TO_REG reg
movl %gs, \reg
- /*CFI_REGISTER gs, \reg*/
.endm
.macro REG_TO_PTGS reg
movl \reg, PT_GS(%esp)
- /*CFI_REL_OFFSET gs, PT_GS*/
.endm
.macro SET_KERNEL_GS reg
movl $(__KERNEL_STACK_CANARY), \reg
.macro SAVE_ALL
cld
PUSH_GS
- pushl_cfi %fs
- /*CFI_REL_OFFSET fs, 0;*/
- pushl_cfi %es
- /*CFI_REL_OFFSET es, 0;*/
- pushl_cfi %ds
- /*CFI_REL_OFFSET ds, 0;*/
- pushl_cfi %eax
- CFI_REL_OFFSET eax, 0
- pushl_cfi %ebp
- CFI_REL_OFFSET ebp, 0
- pushl_cfi %edi
- CFI_REL_OFFSET edi, 0
- pushl_cfi %esi
- CFI_REL_OFFSET esi, 0
- pushl_cfi %edx
- CFI_REL_OFFSET edx, 0
- pushl_cfi %ecx
- CFI_REL_OFFSET ecx, 0
- pushl_cfi %ebx
- CFI_REL_OFFSET ebx, 0
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
movl $(__USER_DS), %edx
movl %edx, %ds
movl %edx, %es
.endm
.macro RESTORE_INT_REGS
- popl_cfi %ebx
- CFI_RESTORE ebx
- popl_cfi %ecx
- CFI_RESTORE ecx
- popl_cfi %edx
- CFI_RESTORE edx
- popl_cfi %esi
- CFI_RESTORE esi
- popl_cfi %edi
- CFI_RESTORE edi
- popl_cfi %ebp
- CFI_RESTORE ebp
- popl_cfi %eax
- CFI_RESTORE eax
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+ popl %eax
.endm
.macro RESTORE_REGS pop=0
RESTORE_INT_REGS
-1: popl_cfi %ds
- /*CFI_RESTORE ds;*/
-2: popl_cfi %es
- /*CFI_RESTORE es;*/
-3: popl_cfi %fs
- /*CFI_RESTORE fs;*/
+1: popl %ds
+2: popl %es
+3: popl %fs
POP_GS \pop
.pushsection .fixup, "ax"
4: movl $0, (%esp)
POP_GS_EX
.endm
-.macro RING0_INT_FRAME
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 3*4
- /*CFI_OFFSET cs, -2*4;*/
- CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_EC_FRAME
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 4*4
- /*CFI_OFFSET cs, -2*4;*/
- CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_PTREGS_FRAME
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, PT_OLDESP-PT_EBX
- /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/
- CFI_OFFSET eip, PT_EIP-PT_OLDESP
- /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/
- /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/
- CFI_OFFSET eax, PT_EAX-PT_OLDESP
- CFI_OFFSET ebp, PT_EBP-PT_OLDESP
- CFI_OFFSET edi, PT_EDI-PT_OLDESP
- CFI_OFFSET esi, PT_ESI-PT_OLDESP
- CFI_OFFSET edx, PT_EDX-PT_OLDESP
- CFI_OFFSET ecx, PT_ECX-PT_OLDESP
- CFI_OFFSET ebx, PT_EBX-PT_OLDESP
-.endm
-
ENTRY(ret_from_fork)
- CFI_STARTPROC
- pushl_cfi %eax
+ pushl %eax
call schedule_tail
GET_THREAD_INFO(%ebp)
- popl_cfi %eax
- pushl_cfi $0x0202 # Reset kernel eflags
- popfl_cfi
+ popl %eax
+ pushl $0x0202 # Reset kernel eflags
+ popfl
jmp syscall_exit
- CFI_ENDPROC
END(ret_from_fork)
ENTRY(ret_from_kernel_thread)
- CFI_STARTPROC
- pushl_cfi %eax
+ pushl %eax
call schedule_tail
GET_THREAD_INFO(%ebp)
- popl_cfi %eax
- pushl_cfi $0x0202 # Reset kernel eflags
- popfl_cfi
+ popl %eax
+ pushl $0x0202 # Reset kernel eflags
+ popfl
movl PT_EBP(%esp),%eax
call *PT_EBX(%esp)
movl $0,PT_EAX(%esp)
jmp syscall_exit
- CFI_ENDPROC
ENDPROC(ret_from_kernel_thread)
/*
# userspace resumption stub bypassing syscall exit tracing
ALIGN
- RING0_PTREGS_FRAME
ret_from_exception:
preempt_stop(CLBR_ANY)
ret_from_intr:
jmp need_resched
END(resume_kernel)
#endif
- CFI_ENDPROC
/* SYSENTER_RETURN points to after the "sysenter" instruction in
the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
# sysenter call handler stub
ENTRY(ia32_sysenter_target)
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA esp, 0
- CFI_REGISTER esp, ebp
movl TSS_sysenter_sp0(%esp),%esp
sysenter_past_esp:
/*
* enough kernel state to call TRACE_IRQS_OFF can be called - but
* we immediately enable interrupts at that point anyway.
*/
- pushl_cfi $__USER_DS
- /*CFI_REL_OFFSET ss, 0*/
- pushl_cfi %ebp
- CFI_REL_OFFSET esp, 0
- pushfl_cfi
+ pushl $__USER_DS
+ pushl %ebp
+ pushfl
orl $X86_EFLAGS_IF, (%esp)
- pushl_cfi $__USER_CS
- /*CFI_REL_OFFSET cs, 0*/
+ pushl $__USER_CS
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary: TI_sysenter_return
* TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
* and THREAD_SIZE takes us to the bottom.
*/
- pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
- CFI_REL_OFFSET eip, 0
+ pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
- pushl_cfi %eax
+ pushl %eax
SAVE_ALL
ENABLE_INTERRUPTS(CLBR_NONE)
/* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
/* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
- pushl_cfi PT_ESI(%esp) /* a3: 5th arg */
- pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */
+ pushl PT_ESI(%esp) /* a3: 5th arg */
+ pushl PT_EDX+4(%esp) /* a2: 4th arg */
call __audit_syscall_entry
- popl_cfi %ecx /* get that remapped edx off the stack */
- popl_cfi %ecx /* get that remapped esi off the stack */
+ popl %ecx /* get that remapped edx off the stack */
+ popl %ecx /* get that remapped esi off the stack */
movl PT_EAX(%esp),%eax /* reload syscall number */
jmp sysenter_do_call
jmp sysenter_exit
#endif
- CFI_ENDPROC
.pushsection .fixup,"ax"
2: movl $0,PT_FS(%esp)
jmp 1b
# system call handler stub
ENTRY(system_call)
- RING0_INT_FRAME # can't unwind into user space anyway
ASM_CLAC
- pushl_cfi %eax # save orig_eax
+ pushl %eax # save orig_eax
SAVE_ALL
GET_THREAD_INFO(%ebp)
# system call tracing in operation / emulation
movb PT_CS(%esp), %al
andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
- CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
#endif
restore_nocheck:
_ASM_EXTABLE(irq_return,iret_exc)
#ifdef CONFIG_X86_ESPFIX32
- CFI_RESTORE_STATE
ldt_ss:
#ifdef CONFIG_PARAVIRT
/*
shr $16, %edx
mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
- pushl_cfi $__ESPFIX_SS
- pushl_cfi %eax /* new kernel esp */
+ pushl $__ESPFIX_SS
+ pushl %eax /* new kernel esp */
/* Disable interrupts, but do not irqtrace this section: we
* will soon execute iret and the tracer was already set to
* the irqstate after the iret */
DISABLE_INTERRUPTS(CLBR_EAX)
lss (%esp), %esp /* switch to espfix segment */
- CFI_ADJUST_CFA_OFFSET -8
jmp restore_nocheck
#endif
- CFI_ENDPROC
ENDPROC(system_call)
# perform work that needs to be done immediately before resumption
ALIGN
- RING0_PTREGS_FRAME # can't unwind into user space anyway
work_pending:
testb $_TIF_NEED_RESCHED, %cl
jz work_notifysig
#ifdef CONFIG_VM86
ALIGN
work_notifysig_v86:
- pushl_cfi %ecx # save ti_flags for do_notify_resume
+ pushl %ecx # save ti_flags for do_notify_resume
call save_v86_state # %eax contains pt_regs pointer
- popl_cfi %ecx
+ popl %ecx
movl %eax, %esp
jmp 1b
#endif
call syscall_trace_leave
jmp resume_userspace
END(syscall_exit_work)
- CFI_ENDPROC
- RING0_INT_FRAME # can't unwind into user space anyway
syscall_fault:
ASM_CLAC
GET_THREAD_INFO(%ebp)
movl $-ENOSYS,%eax
jmp sysenter_after_call
END(sysenter_badsys)
- CFI_ENDPROC
.macro FIXUP_ESPFIX_STACK
/*
mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
shl $16, %eax
addl %esp, %eax /* the adjusted stack pointer */
- pushl_cfi $__KERNEL_DS
- pushl_cfi %eax
+ pushl $__KERNEL_DS
+ pushl %eax
lss (%esp), %esp /* switch to the normal stack segment */
- CFI_ADJUST_CFA_OFFSET -8
#endif
.endm
.macro UNWIND_ESPFIX_STACK
*/
.align 8
ENTRY(irq_entries_start)
- RING0_INT_FRAME
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
- pushl_cfi $(~vector+0x80) /* Note: always in signed byte range */
+ pushl $(~vector+0x80) /* Note: always in signed byte range */
vector=vector+1
jmp common_interrupt
- CFI_ADJUST_CFA_OFFSET -4
.align 8
.endr
END(irq_entries_start)
call do_IRQ
jmp ret_from_intr
ENDPROC(common_interrupt)
- CFI_ENDPROC
#define BUILD_INTERRUPT3(name, nr, fn) \
ENTRY(name) \
- RING0_INT_FRAME; \
ASM_CLAC; \
- pushl_cfi $~(nr); \
+ pushl $~(nr); \
SAVE_ALL; \
TRACE_IRQS_OFF \
movl %esp,%eax; \
call fn; \
jmp ret_from_intr; \
- CFI_ENDPROC; \
ENDPROC(name)
#include <asm/entry_arch.h>
ENTRY(coprocessor_error)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_coprocessor_error
+ pushl $0
+ pushl $do_coprocessor_error
jmp error_code
- CFI_ENDPROC
END(coprocessor_error)
ENTRY(simd_coprocessor_error)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
+ pushl $0
#ifdef CONFIG_X86_INVD_BUG
/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
- ALTERNATIVE "pushl_cfi $do_general_protection", \
+ ALTERNATIVE "pushl $do_general_protection", \
"pushl $do_simd_coprocessor_error", \
X86_FEATURE_XMM
#else
- pushl_cfi $do_simd_coprocessor_error
+ pushl $do_simd_coprocessor_error
#endif
jmp error_code
- CFI_ENDPROC
END(simd_coprocessor_error)
ENTRY(device_not_available)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $-1 # mark this as an int
- pushl_cfi $do_device_not_available
+ pushl $-1 # mark this as an int
+ pushl $do_device_not_available
jmp error_code
- CFI_ENDPROC
END(device_not_available)
#ifdef CONFIG_PARAVIRT
#endif
ENTRY(overflow)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_overflow
+ pushl $0
+ pushl $do_overflow
jmp error_code
- CFI_ENDPROC
END(overflow)
ENTRY(bounds)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_bounds
+ pushl $0
+ pushl $do_bounds
jmp error_code
- CFI_ENDPROC
END(bounds)
ENTRY(invalid_op)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_invalid_op
+ pushl $0
+ pushl $do_invalid_op
jmp error_code
- CFI_ENDPROC
END(invalid_op)
ENTRY(coprocessor_segment_overrun)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_coprocessor_segment_overrun
+ pushl $0
+ pushl $do_coprocessor_segment_overrun
jmp error_code
- CFI_ENDPROC
END(coprocessor_segment_overrun)
ENTRY(invalid_TSS)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $do_invalid_TSS
+ pushl $do_invalid_TSS
jmp error_code
- CFI_ENDPROC
END(invalid_TSS)
ENTRY(segment_not_present)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $do_segment_not_present
+ pushl $do_segment_not_present
jmp error_code
- CFI_ENDPROC
END(segment_not_present)
ENTRY(stack_segment)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $do_stack_segment
+ pushl $do_stack_segment
jmp error_code
- CFI_ENDPROC
END(stack_segment)
ENTRY(alignment_check)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $do_alignment_check
+ pushl $do_alignment_check
jmp error_code
- CFI_ENDPROC
END(alignment_check)
ENTRY(divide_error)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0 # no error code
- pushl_cfi $do_divide_error
+ pushl $0 # no error code
+ pushl $do_divide_error
jmp error_code
- CFI_ENDPROC
END(divide_error)
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi machine_check_vector
+ pushl $0
+ pushl machine_check_vector
jmp error_code
- CFI_ENDPROC
END(machine_check)
#endif
ENTRY(spurious_interrupt_bug)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $0
- pushl_cfi $do_spurious_interrupt_bug
+ pushl $0
+ pushl $do_spurious_interrupt_bug
jmp error_code
- CFI_ENDPROC
END(spurious_interrupt_bug)
#ifdef CONFIG_XEN
/* Xen doesn't set %esp to be precisely what the normal sysenter
entrypoint expects, so fix it up before using the normal path. */
ENTRY(xen_sysenter_target)
- RING0_INT_FRAME
addl $5*4, %esp /* remove xen-provided frame */
- CFI_ADJUST_CFA_OFFSET -5*4
jmp sysenter_past_esp
- CFI_ENDPROC
ENTRY(xen_hypervisor_callback)
- CFI_STARTPROC
- pushl_cfi $-1 /* orig_ax = -1 => not a system call */
+ pushl $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
TRACE_IRQS_OFF
call xen_maybe_preempt_hcall
#endif
jmp ret_from_intr
- CFI_ENDPROC
ENDPROC(xen_hypervisor_callback)
# Hypervisor uses this for application faults while it executes.
# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
# We distinguish between categories by maintaining a status value in EAX.
ENTRY(xen_failsafe_callback)
- CFI_STARTPROC
- pushl_cfi %eax
+ pushl %eax
movl $1,%eax
1: mov 4(%esp),%ds
2: mov 8(%esp),%es
/* EAX == 0 => Category 1 (Bad segment)
EAX != 0 => Category 2 (Bad IRET) */
testl %eax,%eax
- popl_cfi %eax
+ popl %eax
lea 16(%esp),%esp
- CFI_ADJUST_CFA_OFFSET -16
jz 5f
jmp iret_exc
-5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */
+5: pushl $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
jmp ret_from_exception
- CFI_ENDPROC
.section .fixup,"ax"
6: xorl %eax,%eax
#ifdef CONFIG_TRACING
ENTRY(trace_page_fault)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $trace_do_page_fault
+ pushl $trace_do_page_fault
jmp error_code
- CFI_ENDPROC
END(trace_page_fault)
#endif
ENTRY(page_fault)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $do_page_fault
+ pushl $do_page_fault
ALIGN
error_code:
/* the function address is in %gs's slot on the stack */
- pushl_cfi %fs
- /*CFI_REL_OFFSET fs, 0*/
- pushl_cfi %es
- /*CFI_REL_OFFSET es, 0*/
- pushl_cfi %ds
- /*CFI_REL_OFFSET ds, 0*/
- pushl_cfi_reg eax
- pushl_cfi_reg ebp
- pushl_cfi_reg edi
- pushl_cfi_reg esi
- pushl_cfi_reg edx
- pushl_cfi_reg ecx
- pushl_cfi_reg ebx
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
cld
movl $(__KERNEL_PERCPU), %ecx
movl %ecx, %fs
movl %esp,%eax # pt_regs pointer
call *%edi
jmp ret_from_exception
- CFI_ENDPROC
END(page_fault)
/*
jne \ok
\label:
movl TSS_sysenter_sp0 + \offset(%esp), %esp
- CFI_DEF_CFA esp, 0
- CFI_UNDEFINED eip
- pushfl_cfi
- pushl_cfi $__KERNEL_CS
- pushl_cfi $sysenter_past_esp
- CFI_REL_OFFSET eip, 0
+ pushfl
+ pushl $__KERNEL_CS
+ pushl $sysenter_past_esp
.endm
ENTRY(debug)
- RING0_INT_FRAME
ASM_CLAC
cmpl $ia32_sysenter_target,(%esp)
jne debug_stack_correct
FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
debug_stack_correct:
- pushl_cfi $-1 # mark this as an int
+ pushl $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
xorl %edx,%edx # error code 0
movl %esp,%eax # pt_regs pointer
call do_debug
jmp ret_from_exception
- CFI_ENDPROC
END(debug)
/*
* fault happened on the sysenter path.
*/
ENTRY(nmi)
- RING0_INT_FRAME
ASM_CLAC
#ifdef CONFIG_X86_ESPFIX32
- pushl_cfi %eax
+ pushl %eax
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
- popl_cfi %eax
+ popl %eax
je nmi_espfix_stack
#endif
cmpl $ia32_sysenter_target,(%esp)
je nmi_stack_fixup
- pushl_cfi %eax
+ pushl %eax
movl %esp,%eax
/* Do not access memory above the end of our stack page,
* it might not exist.
*/
andl $(THREAD_SIZE-1),%eax
cmpl $(THREAD_SIZE-20),%eax
- popl_cfi %eax
+ popl %eax
jae nmi_stack_correct
cmpl $ia32_sysenter_target,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
- /* We have a RING0_INT_FRAME here */
- pushl_cfi %eax
+ pushl %eax
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
jmp restore_all_notrace
- CFI_ENDPROC
nmi_stack_fixup:
- RING0_INT_FRAME
FIX_STACK 12, nmi_stack_correct, 1
jmp nmi_stack_correct
nmi_debug_stack_check:
- /* We have a RING0_INT_FRAME here */
cmpw $__KERNEL_CS,16(%esp)
jne nmi_stack_correct
cmpl $debug,(%esp)
#ifdef CONFIG_X86_ESPFIX32
nmi_espfix_stack:
- /* We have a RING0_INT_FRAME here.
- *
+ /*
* create the pointer to lss back
*/
- pushl_cfi %ss
- pushl_cfi %esp
+ pushl %ss
+ pushl %esp
addl $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
- pushl_cfi 16(%esp)
+ pushl 16(%esp)
.endr
- pushl_cfi %eax
+ pushl %eax
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
xorl %edx,%edx # zero error code
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to espfix stack
- CFI_ADJUST_CFA_OFFSET -24
jmp irq_return
#endif
- CFI_ENDPROC
END(nmi)
ENTRY(int3)
- RING0_INT_FRAME
ASM_CLAC
- pushl_cfi $-1 # mark this as an int
+ pushl $-1 # mark this as an int
SAVE_ALL
TRACE_IRQS_OFF
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_int3
jmp ret_from_exception
- CFI_ENDPROC
END(int3)
ENTRY(general_protection)
- RING0_EC_FRAME
- pushl_cfi $do_general_protection
+ pushl $do_general_protection
jmp error_code
- CFI_ENDPROC
END(general_protection)
#ifdef CONFIG_KVM_GUEST
ENTRY(async_page_fault)
- RING0_EC_FRAME
ASM_CLAC
- pushl_cfi $do_async_page_fault
+ pushl $do_async_page_fault
jmp error_code
- CFI_ENDPROC
END(async_page_fault)
#endif
* at the top of the kernel process stack.
*
* Some macro usage:
- * - CFI macros are used to generate dwarf2 unwind information for better
- * backtraces. They don't change any code.
* - ENTRY/END Define functions in the symbol table.
* - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
* - idtentry - Define exception entry points.
#include <asm/segment.h>
#include <asm/cache.h>
#include <asm/errno.h>
-#include <asm/dwarf2.h>
#include <asm/calling.h>
#include <asm/asm-offsets.h>
#include <asm/msr.h>
# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ
#endif
-/*
- * empty frame
- */
- .macro EMPTY_FRAME start=1 offset=0
- .if \start
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,8+\offset
- .else
- CFI_DEF_CFA_OFFSET 8+\offset
- .endif
- .endm
-
-/*
- * initial frame state for interrupts (and exceptions without error code)
- */
- .macro INTR_FRAME start=1 offset=0
- EMPTY_FRAME \start, 5*8+\offset
- /*CFI_REL_OFFSET ss, 4*8+\offset*/
- CFI_REL_OFFSET rsp, 3*8+\offset
- /*CFI_REL_OFFSET rflags, 2*8+\offset*/
- /*CFI_REL_OFFSET cs, 1*8+\offset*/
- CFI_REL_OFFSET rip, 0*8+\offset
- .endm
-
-/*
- * initial frame state for exceptions with error code (and interrupts
- * with vector already pushed)
- */
- .macro XCPT_FRAME start=1 offset=0
- INTR_FRAME \start, 1*8+\offset
- .endm
-
-/*
- * frame that enables passing a complete pt_regs to a C function.
- */
- .macro DEFAULT_FRAME start=1 offset=0
- XCPT_FRAME \start, ORIG_RAX+\offset
- CFI_REL_OFFSET rdi, RDI+\offset
- CFI_REL_OFFSET rsi, RSI+\offset
- CFI_REL_OFFSET rdx, RDX+\offset
- CFI_REL_OFFSET rcx, RCX+\offset
- CFI_REL_OFFSET rax, RAX+\offset
- CFI_REL_OFFSET r8, R8+\offset
- CFI_REL_OFFSET r9, R9+\offset
- CFI_REL_OFFSET r10, R10+\offset
- CFI_REL_OFFSET r11, R11+\offset
- CFI_REL_OFFSET rbx, RBX+\offset
- CFI_REL_OFFSET rbp, RBP+\offset
- CFI_REL_OFFSET r12, R12+\offset
- CFI_REL_OFFSET r13, R13+\offset
- CFI_REL_OFFSET r14, R14+\offset
- CFI_REL_OFFSET r15, R15+\offset
- .endm
-
/*
* 64bit SYSCALL instruction entry. Up to 6 arguments in registers.
*
*/
ENTRY(system_call)
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,0
- CFI_REGISTER rip,rcx
- /*CFI_REGISTER rflags,r11*/
-
/*
* Interrupts are off on entry.
* We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp
/* Construct struct pt_regs on stack */
- pushq_cfi $__USER_DS /* pt_regs->ss */
- pushq_cfi PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
+ pushq $__USER_DS /* pt_regs->ss */
+ pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
/*
* Re-enable interrupts.
* We use 'rsp_scratch' as a scratch space, hence irq-off block above
* with using rsp_scratch:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
- pushq_cfi %r11 /* pt_regs->flags */
- pushq_cfi $__USER_CS /* pt_regs->cs */
- pushq_cfi %rcx /* pt_regs->ip */
- CFI_REL_OFFSET rip,0
- pushq_cfi_reg rax /* pt_regs->orig_ax */
- pushq_cfi_reg rdi /* pt_regs->di */
- pushq_cfi_reg rsi /* pt_regs->si */
- pushq_cfi_reg rdx /* pt_regs->dx */
- pushq_cfi_reg rcx /* pt_regs->cx */
- pushq_cfi $-ENOSYS /* pt_regs->ax */
- pushq_cfi_reg r8 /* pt_regs->r8 */
- pushq_cfi_reg r9 /* pt_regs->r9 */
- pushq_cfi_reg r10 /* pt_regs->r10 */
- pushq_cfi_reg r11 /* pt_regs->r11 */
+ pushq %r11 /* pt_regs->flags */
+ pushq $__USER_CS /* pt_regs->cs */
+ pushq %rcx /* pt_regs->ip */
+ pushq %rax /* pt_regs->orig_ax */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq $-ENOSYS /* pt_regs->ax */
+ pushq %r8 /* pt_regs->r8 */
+ pushq %r9 /* pt_regs->r9 */
+ pushq %r10 /* pt_regs->r10 */
+ pushq %r11 /* pt_regs->r11 */
sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
- CFI_ADJUST_CFA_OFFSET 6*8
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz tracesys
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
- CFI_REMEMBER_STATE
-
RESTORE_C_REGS_EXCEPT_RCX_R11
movq RIP(%rsp),%rcx
- CFI_REGISTER rip,rcx
movq EFLAGS(%rsp),%r11
- /*CFI_REGISTER rflags,r11*/
movq RSP(%rsp),%rsp
/*
* 64bit SYSRET restores rip from rcx,
*/
USERGS_SYSRET64
- CFI_RESTORE_STATE
-
/* Do syscall entry tracing */
tracesys:
movq %rsp, %rdi
jnc int_very_careful
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- pushq_cfi %rdi
+ pushq %rdi
SCHEDULE_USER
- popq_cfi %rdi
+ popq %rdi
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
/* Check for syscall exit trace */
testl $_TIF_WORK_SYSCALL_EXIT,%edx
jz int_signal
- pushq_cfi %rdi
+ pushq %rdi
leaq 8(%rsp),%rdi # &ptregs -> arg1
call syscall_trace_leave
- popq_cfi %rdi
+ popq %rdi
andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
jmp int_restore_rest
* perf profiles. Nothing jumps here.
*/
syscall_return_via_sysret:
- CFI_REMEMBER_STATE
/* rcx and r11 are already restored (see code above) */
RESTORE_C_REGS_EXCEPT_RCX_R11
movq RSP(%rsp),%rsp
USERGS_SYSRET64
- CFI_RESTORE_STATE
opportunistic_sysret_failed:
SWAPGS
jmp restore_c_regs_and_iret
- CFI_ENDPROC
END(system_call)
.macro FORK_LIKE func
ENTRY(stub_\func)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8 /* offset 8: return address */
SAVE_EXTRA_REGS 8
jmp sys_\func
- CFI_ENDPROC
END(stub_\func)
.endm
FORK_LIKE vfork
ENTRY(stub_execve)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
call sys_execve
return_from_execve:
testl %eax, %eax
1:
/* must use IRET code path (pt_regs->cs may have changed) */
addq $8, %rsp
- CFI_ADJUST_CFA_OFFSET -8
ZERO_EXTRA_REGS
movq %rax,RAX(%rsp)
jmp int_ret_from_sys_call
- CFI_ENDPROC
END(stub_execve)
/*
* Remaining execve stubs are only 7 bytes long.
*/
.align 8
GLOBAL(stub_execveat)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
call sys_execveat
jmp return_from_execve
- CFI_ENDPROC
END(stub_execveat)
#if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION)
.align 8
GLOBAL(stub_x32_execve)
GLOBAL(stub32_execve)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
call compat_sys_execve
jmp return_from_execve
- CFI_ENDPROC
END(stub32_execve)
END(stub_x32_execve)
.align 8
GLOBAL(stub_x32_execveat)
GLOBAL(stub32_execveat)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
call compat_sys_execveat
jmp return_from_execve
- CFI_ENDPROC
END(stub32_execveat)
END(stub_x32_execveat)
#endif
* This cannot be done with SYSRET, so use the IRET return path instead.
*/
ENTRY(stub_rt_sigreturn)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
/*
* SAVE_EXTRA_REGS result is not normally needed:
* sigreturn overwrites all pt_regs->GPREGS.
call sys_rt_sigreturn
return_from_stub:
addq $8, %rsp
- CFI_ADJUST_CFA_OFFSET -8
RESTORE_EXTRA_REGS
movq %rax,RAX(%rsp)
jmp int_ret_from_sys_call
- CFI_ENDPROC
END(stub_rt_sigreturn)
#ifdef CONFIG_X86_X32_ABI
ENTRY(stub_x32_rt_sigreturn)
- CFI_STARTPROC
- DEFAULT_FRAME 0, 8
SAVE_EXTRA_REGS 8
call sys32_x32_rt_sigreturn
jmp return_from_stub
- CFI_ENDPROC
END(stub_x32_rt_sigreturn)
#endif
* rdi: prev task we switched from
*/
ENTRY(ret_from_fork)
- DEFAULT_FRAME
LOCK ; btr $TIF_FORK,TI_flags(%r8)
- pushq_cfi $0x0002
- popfq_cfi # reset kernel eflags
+ pushq $0x0002
+ popfq # reset kernel eflags
call schedule_tail # rdi: 'prev' task parameter
movl $0, RAX(%rsp)
RESTORE_EXTRA_REGS
jmp int_ret_from_sys_call
- CFI_ENDPROC
END(ret_from_fork)
/*
*/
.align 8
ENTRY(irq_entries_start)
- INTR_FRAME
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
- pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */
+ pushq $(~vector+0x80) /* Note: always in signed byte range */
vector=vector+1
jmp common_interrupt
- CFI_ADJUST_CFA_OFFSET -8
.align 8
.endr
- CFI_ENDPROC
END(irq_entries_start)
/*
movq %rsp, %rsi
incl PER_CPU_VAR(irq_count)
cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
- CFI_DEF_CFA_REGISTER rsi
pushq %rsi
- /*
- * For debugger:
- * "CFA (Current Frame Address) is the value on stack + offset"
- */
- CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \
- 0x77 /* DW_OP_breg7 (rsp) */, 0, \
- 0x06 /* DW_OP_deref */, \
- 0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \
- 0x22 /* DW_OP_plus */
/* We entered an interrupt context - irqs are off: */
TRACE_IRQS_OFF
*/
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
- XCPT_FRAME
ASM_CLAC
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
/* Restore saved previous stack */
popq %rsi
- CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */
/* return code expects complete pt_regs - adjust rsp accordingly: */
leaq -RBP(%rsi),%rsp
- CFI_DEF_CFA_REGISTER rsp
- CFI_ADJUST_CFA_OFFSET RBP
testb $3, CS(%rsp)
jz retint_kernel
LOCKDEP_SYS_EXIT_IRQ
movl TI_flags(%rcx),%edx
andl %edi,%edx
- CFI_REMEMBER_STATE
jnz retint_careful
retint_swapgs: /* return to user-space */
#ifdef CONFIG_X86_ESPFIX64
native_irq_return_ldt:
- pushq_cfi %rax
- pushq_cfi %rdi
+ pushq %rax
+ pushq %rdi
SWAPGS
movq PER_CPU_VAR(espfix_waddr),%rdi
movq %rax,(0*8)(%rdi) /* RAX */
movq (5*8)(%rsp),%rax /* RSP */
movq %rax,(4*8)(%rdi)
andl $0xffff0000,%eax
- popq_cfi %rdi
+ popq %rdi
orq PER_CPU_VAR(espfix_stack),%rax
SWAPGS
movq %rax,%rsp
- popq_cfi %rax
+ popq %rax
jmp native_irq_return_iret
#endif
/* edi: workmask, edx: work */
retint_careful:
- CFI_RESTORE_STATE
bt $TIF_NEED_RESCHED,%edx
jnc retint_signal
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- pushq_cfi %rdi
+ pushq %rdi
SCHEDULE_USER
- popq_cfi %rdi
+ popq %rdi
GET_THREAD_INFO(%rcx)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
GET_THREAD_INFO(%rcx)
jmp retint_with_reschedule
- CFI_ENDPROC
END(common_interrupt)
/*
*/
.macro apicinterrupt3 num sym do_sym
ENTRY(\sym)
- INTR_FRAME
ASM_CLAC
- pushq_cfi $~(\num)
+ pushq $~(\num)
.Lcommon_\sym:
interrupt \do_sym
jmp ret_from_intr
- CFI_ENDPROC
END(\sym)
.endm
.error "using shift_ist requires paranoid=1"
.endif
- .if \has_error_code
- XCPT_FRAME
- .else
- INTR_FRAME
- .endif
-
ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
.ifeq \has_error_code
- pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
.endif
ALLOC_PT_GPREGS_ON_STACK
.if \paranoid
.if \paranoid == 1
- CFI_REMEMBER_STATE
testb $3, CS(%rsp) /* If coming from userspace, switch */
jnz 1f /* stacks. */
.endif
.endif
/* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
- DEFAULT_FRAME 0
-
.if \paranoid
.if \shift_ist != -1
TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */
.endif
.if \paranoid == 1
- CFI_RESTORE_STATE
/*
* Paranoid entry from userspace. Switch stacks and treat it
* as a normal entry. This means that paranoid handlers
1:
call error_entry
- DEFAULT_FRAME 0
movq %rsp,%rdi /* pt_regs pointer */
call sync_regs
jmp error_exit /* %ebx: no swapgs flag */
.endif
-
- CFI_ENDPROC
END(\sym)
.endm
/* Reload gs selector with exception handling */
/* edi: new selector */
ENTRY(native_load_gs_index)
- CFI_STARTPROC
- pushfq_cfi
+ pushfq
DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
SWAPGS
gs_change:
movl %edi,%gs
2: mfence /* workaround */
SWAPGS
- popfq_cfi
+ popfq
ret
- CFI_ENDPROC
END(native_load_gs_index)
_ASM_EXTABLE(gs_change,bad_gs)
/* Call softirq on interrupt stack. Interrupts are off. */
ENTRY(do_softirq_own_stack)
- CFI_STARTPROC
- pushq_cfi %rbp
- CFI_REL_OFFSET rbp,0
+ pushq %rbp
mov %rsp,%rbp
- CFI_DEF_CFA_REGISTER rbp
incl PER_CPU_VAR(irq_count)
cmove PER_CPU_VAR(irq_stack_ptr),%rsp
push %rbp # backlink for old unwinder
call __do_softirq
leaveq
- CFI_RESTORE rbp
- CFI_DEF_CFA_REGISTER rsp
- CFI_ADJUST_CFA_OFFSET -8
decl PER_CPU_VAR(irq_count)
ret
- CFI_ENDPROC
END(do_softirq_own_stack)
#ifdef CONFIG_XEN
* activation and restart the handler using the previous one.
*/
ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
- CFI_STARTPROC
/*
* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
* see the correct pointer to the pt_regs
*/
movq %rdi, %rsp # we don't return, adjust the stack frame
- CFI_ENDPROC
- DEFAULT_FRAME
11: incl PER_CPU_VAR(irq_count)
movq %rsp,%rbp
- CFI_DEF_CFA_REGISTER rbp
cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
pushq %rbp # backlink for old unwinder
call xen_evtchn_do_upcall
popq %rsp
- CFI_DEF_CFA_REGISTER rsp
decl PER_CPU_VAR(irq_count)
#ifndef CONFIG_PREEMPT
call xen_maybe_preempt_hcall
#endif
jmp error_exit
- CFI_ENDPROC
END(xen_do_hypervisor_callback)
/*
* with its current contents: any discrepancy means we in category 1.
*/
ENTRY(xen_failsafe_callback)
- INTR_FRAME 1 (6*8)
- /*CFI_REL_OFFSET gs,GS*/
- /*CFI_REL_OFFSET fs,FS*/
- /*CFI_REL_OFFSET es,ES*/
- /*CFI_REL_OFFSET ds,DS*/
- CFI_REL_OFFSET r11,8
- CFI_REL_OFFSET rcx,0
movl %ds,%ecx
cmpw %cx,0x10(%rsp)
- CFI_REMEMBER_STATE
jne 1f
movl %es,%ecx
cmpw %cx,0x18(%rsp)
jne 1f
/* All segments match their saved values => Category 2 (Bad IRET). */
movq (%rsp),%rcx
- CFI_RESTORE rcx
movq 8(%rsp),%r11
- CFI_RESTORE r11
addq $0x30,%rsp
- CFI_ADJUST_CFA_OFFSET -0x30
- pushq_cfi $0 /* RIP */
- pushq_cfi %r11
- pushq_cfi %rcx
+ pushq $0 /* RIP */
+ pushq %r11
+ pushq %rcx
jmp general_protection
- CFI_RESTORE_STATE
1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
movq (%rsp),%rcx
- CFI_RESTORE rcx
movq 8(%rsp),%r11
- CFI_RESTORE r11
addq $0x30,%rsp
- CFI_ADJUST_CFA_OFFSET -0x30
- pushq_cfi $-1 /* orig_ax = -1 => not a system call */
+ pushq $-1 /* orig_ax = -1 => not a system call */
ALLOC_PT_GPREGS_ON_STACK
SAVE_C_REGS
SAVE_EXTRA_REGS
jmp error_exit
- CFI_ENDPROC
END(xen_failsafe_callback)
apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
* Return: ebx=0: need swapgs on exit, ebx=1: otherwise
*/
ENTRY(paranoid_entry)
- XCPT_FRAME 1 15*8
cld
SAVE_C_REGS 8
SAVE_EXTRA_REGS 8
SWAPGS
xorl %ebx,%ebx
1: ret
- CFI_ENDPROC
END(paranoid_entry)
/*
*/
/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
ENTRY(paranoid_exit)
- DEFAULT_FRAME
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF_DEBUG
testl %ebx,%ebx /* swapgs needed? */
RESTORE_C_REGS
REMOVE_PT_GPREGS_FROM_STACK 8
INTERRUPT_RETURN
- CFI_ENDPROC
END(paranoid_exit)
/*
* Return: ebx=0: need swapgs on exit, ebx=1: otherwise
*/
ENTRY(error_entry)
- XCPT_FRAME 1 15*8
cld
SAVE_C_REGS 8
SAVE_EXTRA_REGS 8
* for these here too.
*/
error_kernelspace:
- CFI_REL_OFFSET rcx, RCX+8
incl %ebx
leaq native_irq_return_iret(%rip),%rcx
cmpq %rcx,RIP+8(%rsp)
mov %rax,%rsp
decl %ebx /* Return to usergs */
jmp error_sti
- CFI_ENDPROC
END(error_entry)
/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
ENTRY(error_exit)
- DEFAULT_FRAME
movl %ebx,%eax
RESTORE_EXTRA_REGS
DISABLE_INTERRUPTS(CLBR_NONE)
andl %edi,%edx
jnz retint_careful
jmp retint_swapgs
- CFI_ENDPROC
END(error_exit)
/* Runs on exception stack */
ENTRY(nmi)
- INTR_FRAME
PARAVIRT_ADJUST_EXCEPTION_FRAME
/*
* We allow breakpoints in NMIs. If a breakpoint occurs, then
*/
/* Use %rdx as our temp variable throughout */
- pushq_cfi %rdx
- CFI_REL_OFFSET rdx, 0
+ pushq %rdx
/*
* If %cs was not the kernel segment, then the NMI triggered in user
jb first_nmi
/* Ah, it is within the NMI stack, treat it as nested */
- CFI_REMEMBER_STATE
-
nested_nmi:
/*
* Do nothing if we interrupted the fixup in repeat_nmi.
/* Set up the interrupted NMIs stack to jump to repeat_nmi */
leaq -1*8(%rsp), %rdx
movq %rdx, %rsp
- CFI_ADJUST_CFA_OFFSET 1*8
leaq -10*8(%rsp), %rdx
- pushq_cfi $__KERNEL_DS
- pushq_cfi %rdx
- pushfq_cfi
- pushq_cfi $__KERNEL_CS
- pushq_cfi $repeat_nmi
+ pushq $__KERNEL_DS
+ pushq %rdx
+ pushfq
+ pushq $__KERNEL_CS
+ pushq $repeat_nmi
/* Put stack back */
addq $(6*8), %rsp
- CFI_ADJUST_CFA_OFFSET -6*8
nested_nmi_out:
- popq_cfi %rdx
- CFI_RESTORE rdx
+ popq %rdx
/* No need to check faults here */
INTERRUPT_RETURN
- CFI_RESTORE_STATE
first_nmi:
/*
* Because nested NMIs will use the pushed location that we
*/
/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
movq (%rsp), %rdx
- CFI_RESTORE rdx
/* Set the NMI executing variable on the stack. */
- pushq_cfi $1
+ pushq $1
/*
* Leave room for the "copied" frame
*/
subq $(5*8), %rsp
- CFI_ADJUST_CFA_OFFSET 5*8
/* Copy the stack frame to the Saved frame */
.rept 5
- pushq_cfi 11*8(%rsp)
+ pushq 11*8(%rsp)
.endr
- CFI_DEF_CFA_OFFSET 5*8
/* Everything up to here is safe from nested NMIs */
/* Make another copy, this one may be modified by nested NMIs */
addq $(10*8), %rsp
- CFI_ADJUST_CFA_OFFSET -10*8
.rept 5
- pushq_cfi -6*8(%rsp)
+ pushq -6*8(%rsp)
.endr
subq $(5*8), %rsp
- CFI_DEF_CFA_OFFSET 5*8
end_repeat_nmi:
/*
* NMI if the first NMI took an exception and reset our iret stack
* so that we repeat another NMI.
*/
- pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
ALLOC_PT_GPREGS_ON_STACK
/*
* exceptions might do.
*/
call paranoid_entry
- DEFAULT_FRAME 0
/*
* Save off the CR2 register. If we take a page fault in the NMI then
/* Clear the NMI executing stack variable */
movq $0, 5*8(%rsp)
jmp irq_return
- CFI_ENDPROC
END(nmi)
ENTRY(ignore_sysret)
- CFI_STARTPROC
mov $-ENOSYS,%eax
sysret
- CFI_ENDPROC
END(ignore_sysret)
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
/* if you want SMP support, implement these with real spinlocks */
.macro LOCK reg
- pushfl_cfi
+ pushfl
cli
.endm
.macro UNLOCK reg
- popfl_cfi
+ popfl
.endm
#define BEGIN(op) \
.macro endp; \
- CFI_ENDPROC; \
ENDPROC(atomic64_##op##_386); \
.purgem endp; \
.endm; \
ENTRY(atomic64_##op##_386); \
- CFI_STARTPROC; \
LOCK v;
#define ENDP endp
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
.macro read64 reg
movl %ebx, %eax
.endm
ENTRY(atomic64_read_cx8)
- CFI_STARTPROC
-
read64 %ecx
ret
- CFI_ENDPROC
ENDPROC(atomic64_read_cx8)
ENTRY(atomic64_set_cx8)
- CFI_STARTPROC
-
1:
/* we don't need LOCK_PREFIX since aligned 64-bit writes
* are atomic on 586 and newer */
jne 1b
ret
- CFI_ENDPROC
ENDPROC(atomic64_set_cx8)
ENTRY(atomic64_xchg_cx8)
- CFI_STARTPROC
-
1:
LOCK_PREFIX
cmpxchg8b (%esi)
jne 1b
ret
- CFI_ENDPROC
ENDPROC(atomic64_xchg_cx8)
.macro addsub_return func ins insc
ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebp
- pushl_cfi_reg ebx
- pushl_cfi_reg esi
- pushl_cfi_reg edi
+ pushl %ebp
+ pushl %ebx
+ pushl %esi
+ pushl %edi
movl %eax, %esi
movl %edx, %edi
10:
movl %ebx, %eax
movl %ecx, %edx
- popl_cfi_reg edi
- popl_cfi_reg esi
- popl_cfi_reg ebx
- popl_cfi_reg ebp
+ popl %edi
+ popl %esi
+ popl %ebx
+ popl %ebp
ret
- CFI_ENDPROC
ENDPROC(atomic64_\func\()_return_cx8)
.endm
.macro incdec_return func ins insc
ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebx
+ pushl %ebx
read64 %esi
1:
10:
movl %ebx, %eax
movl %ecx, %edx
- popl_cfi_reg ebx
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(atomic64_\func\()_return_cx8)
.endm
incdec_return dec sub sbb
ENTRY(atomic64_dec_if_positive_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebx
+ pushl %ebx
read64 %esi
1:
2:
movl %ebx, %eax
movl %ecx, %edx
- popl_cfi_reg ebx
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(atomic64_dec_if_positive_cx8)
ENTRY(atomic64_add_unless_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebp
- pushl_cfi_reg ebx
+ pushl %ebp
+ pushl %ebx
/* these just push these two parameters on the stack */
- pushl_cfi_reg edi
- pushl_cfi_reg ecx
+ pushl %edi
+ pushl %ecx
movl %eax, %ebp
movl %edx, %edi
movl $1, %eax
3:
addl $8, %esp
- CFI_ADJUST_CFA_OFFSET -8
- popl_cfi_reg ebx
- popl_cfi_reg ebp
+ popl %ebx
+ popl %ebp
ret
4:
cmpl %edx, 4(%esp)
jne 2b
xorl %eax, %eax
jmp 3b
- CFI_ENDPROC
ENDPROC(atomic64_add_unless_cx8)
ENTRY(atomic64_inc_not_zero_cx8)
- CFI_STARTPROC
- pushl_cfi_reg ebx
+ pushl %ebx
read64 %esi
1:
movl $1, %eax
3:
- popl_cfi_reg ebx
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(atomic64_inc_not_zero_cx8)
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/errno.h>
#include <asm/asm.h>
* alignment for the unrolled loop.
*/
ENTRY(csum_partial)
- CFI_STARTPROC
- pushl_cfi_reg esi
- pushl_cfi_reg ebx
+ pushl %esi
+ pushl %ebx
movl 20(%esp),%eax # Function arg: unsigned int sum
movl 16(%esp),%ecx # Function arg: int len
movl 12(%esp),%esi # Function arg: unsigned char *buff
jz 8f
roll $8, %eax
8:
- popl_cfi_reg ebx
- popl_cfi_reg esi
+ popl %ebx
+ popl %esi
ret
- CFI_ENDPROC
ENDPROC(csum_partial)
#else
/* Version for PentiumII/PPro */
ENTRY(csum_partial)
- CFI_STARTPROC
- pushl_cfi_reg esi
- pushl_cfi_reg ebx
+ pushl %esi
+ pushl %ebx
movl 20(%esp),%eax # Function arg: unsigned int sum
movl 16(%esp),%ecx # Function arg: int len
movl 12(%esp),%esi # Function arg: const unsigned char *buf
jz 90f
roll $8, %eax
90:
- popl_cfi_reg ebx
- popl_cfi_reg esi
+ popl %ebx
+ popl %esi
ret
- CFI_ENDPROC
ENDPROC(csum_partial)
#endif
#define FP 12
ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
subl $4,%esp
- CFI_ADJUST_CFA_OFFSET 4
- pushl_cfi_reg edi
- pushl_cfi_reg esi
- pushl_cfi_reg ebx
+ pushl %edi
+ pushl %esi
+ pushl %ebx
movl ARGBASE+16(%esp),%eax # sum
movl ARGBASE+12(%esp),%ecx # len
movl ARGBASE+4(%esp),%esi # src
.previous
- popl_cfi_reg ebx
- popl_cfi_reg esi
- popl_cfi_reg edi
- popl_cfi %ecx # equivalent to addl $4,%esp
+ popl %ebx
+ popl %esi
+ popl %edi
+ popl %ecx # equivalent to addl $4,%esp
ret
- CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
#else
#define ARGBASE 12
ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
- pushl_cfi_reg ebx
- pushl_cfi_reg edi
- pushl_cfi_reg esi
+ pushl %ebx
+ pushl %edi
+ pushl %esi
movl ARGBASE+4(%esp),%esi #src
movl ARGBASE+8(%esp),%edi #dst
movl ARGBASE+12(%esp),%ecx #len
jmp 7b
.previous
- popl_cfi_reg esi
- popl_cfi_reg edi
- popl_cfi_reg ebx
+ popl %esi
+ popl %edi
+ popl %ebx
ret
- CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
#undef ROUND
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
* %rdi - page
*/
ENTRY(clear_page)
- CFI_STARTPROC
ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \
"jmp clear_page_c_e", X86_FEATURE_ERMS
xorl %eax,%eax
rep stosq
ret
- CFI_ENDPROC
ENDPROC(clear_page)
ENTRY(clear_page_orig)
- CFI_STARTPROC
xorl %eax,%eax
movl $4096/64,%ecx
jnz .Lloop
nop
ret
- CFI_ENDPROC
ENDPROC(clear_page_orig)
ENTRY(clear_page_c_e)
- CFI_STARTPROC
movl $4096,%ecx
xorl %eax,%eax
rep stosb
ret
- CFI_ENDPROC
ENDPROC(clear_page_c_e)
*
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/percpu.h>
.text
* %al : Operation successful
*/
ENTRY(this_cpu_cmpxchg16b_emu)
-CFI_STARTPROC
#
# Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not
# *atomic* on a single cpu (as provided by the this_cpu_xx class of
# macros).
#
- pushfq_cfi
+ pushfq
cli
cmpq PER_CPU_VAR((%rsi)), %rax
movq %rbx, PER_CPU_VAR((%rsi))
movq %rcx, PER_CPU_VAR(8(%rsi))
- CFI_REMEMBER_STATE
- popfq_cfi
+ popfq
mov $1, %al
ret
- CFI_RESTORE_STATE
.Lnot_same:
- popfq_cfi
+ popfq
xor %al,%al
ret
-CFI_ENDPROC
-
ENDPROC(this_cpu_cmpxchg16b_emu)
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
.text
* %ecx : high 32 bits of new value
*/
ENTRY(cmpxchg8b_emu)
-CFI_STARTPROC
#
# Emulate 'cmpxchg8b (%esi)' on UP except we don't
# set the whole ZF thing (caller will just compare
# eax:edx with the expected value)
#
- pushfl_cfi
+ pushfl
cli
cmpl (%esi), %eax
movl %ebx, (%esi)
movl %ecx, 4(%esi)
- CFI_REMEMBER_STATE
- popfl_cfi
+ popfl
ret
- CFI_RESTORE_STATE
.Lnot_same:
movl (%esi), %eax
.Lhalf_same:
movl 4(%esi), %edx
- popfl_cfi
+ popfl
ret
-CFI_ENDPROC
ENDPROC(cmpxchg8b_emu)
/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
*/
ALIGN
ENTRY(copy_page)
- CFI_STARTPROC
ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
movl $4096/8, %ecx
rep movsq
ret
- CFI_ENDPROC
ENDPROC(copy_page)
ENTRY(copy_page_regs)
- CFI_STARTPROC
subq $2*8, %rsp
- CFI_ADJUST_CFA_OFFSET 2*8
movq %rbx, (%rsp)
- CFI_REL_OFFSET rbx, 0
movq %r12, 1*8(%rsp)
- CFI_REL_OFFSET r12, 1*8
movl $(4096/64)-5, %ecx
.p2align 4
jnz .Loop2
movq (%rsp), %rbx
- CFI_RESTORE rbx
movq 1*8(%rsp), %r12
- CFI_RESTORE r12
addq $2*8, %rsp
- CFI_ADJUST_CFA_OFFSET -2*8
ret
- CFI_ENDPROC
ENDPROC(copy_page_regs)
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
/* Standard copy_to_user with segment limit checking */
ENTRY(_copy_to_user)
- CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rdi,%rcx
addq %rdx,%rcx
X86_FEATURE_REP_GOOD, \
"jmp copy_user_enhanced_fast_string", \
X86_FEATURE_ERMS
- CFI_ENDPROC
ENDPROC(_copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(_copy_from_user)
- CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rsi,%rcx
addq %rdx,%rcx
X86_FEATURE_REP_GOOD, \
"jmp copy_user_enhanced_fast_string", \
X86_FEATURE_ERMS
- CFI_ENDPROC
ENDPROC(_copy_from_user)
.section .fixup,"ax"
/* must zero dest */
ENTRY(bad_from_user)
bad_from_user:
- CFI_STARTPROC
movl %edx,%ecx
xorl %eax,%eax
rep
bad_to_user:
movl %edx,%eax
ret
- CFI_ENDPROC
ENDPROC(bad_from_user)
.previous
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_generic_unrolled)
- CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 20f /* less then 8 bytes, go to byte copy loop */
_ASM_EXTABLE(19b,40b)
_ASM_EXTABLE(21b,50b)
_ASM_EXTABLE(22b,50b)
- CFI_ENDPROC
ENDPROC(copy_user_generic_unrolled)
/* Some CPUs run faster using the string copy instructions.
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_generic_string)
- CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 2f /* less than 8 bytes, go to byte copy loop */
_ASM_EXTABLE(1b,11b)
_ASM_EXTABLE(3b,12b)
- CFI_ENDPROC
ENDPROC(copy_user_generic_string)
/*
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_enhanced_fast_string)
- CFI_STARTPROC
ASM_STAC
movl %edx,%ecx
1: rep
.previous
_ASM_EXTABLE(1b,12b)
- CFI_ENDPROC
ENDPROC(copy_user_enhanced_fast_string)
/*
* This will force destination/source out of cache for more performance.
*/
ENTRY(__copy_user_nocache)
- CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 20f /* less then 8 bytes, go to byte copy loop */
_ASM_EXTABLE(19b,40b)
_ASM_EXTABLE(21b,50b)
_ASM_EXTABLE(22b,50b)
- CFI_ENDPROC
ENDPROC(__copy_user_nocache)
* for more details. No warranty for anything given at all.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/errno.h>
#include <asm/asm.h>
ENTRY(csum_partial_copy_generic)
- CFI_STARTPROC
cmpl $3*64, %edx
jle .Lignore
.Lignore:
subq $7*8, %rsp
- CFI_ADJUST_CFA_OFFSET 7*8
movq %rbx, 2*8(%rsp)
- CFI_REL_OFFSET rbx, 2*8
movq %r12, 3*8(%rsp)
- CFI_REL_OFFSET r12, 3*8
movq %r14, 4*8(%rsp)
- CFI_REL_OFFSET r14, 4*8
movq %r13, 5*8(%rsp)
- CFI_REL_OFFSET r13, 5*8
movq %rbp, 6*8(%rsp)
- CFI_REL_OFFSET rbp, 6*8
movq %r8, (%rsp)
movq %r9, 1*8(%rsp)
addl %ebx, %eax
adcl %r9d, %eax /* carry */
- CFI_REMEMBER_STATE
.Lende:
movq 2*8(%rsp), %rbx
- CFI_RESTORE rbx
movq 3*8(%rsp), %r12
- CFI_RESTORE r12
movq 4*8(%rsp), %r14
- CFI_RESTORE r14
movq 5*8(%rsp), %r13
- CFI_RESTORE r13
movq 6*8(%rsp), %rbp
- CFI_RESTORE rbp
addq $7*8, %rsp
- CFI_ADJUST_CFA_OFFSET -7*8
ret
- CFI_RESTORE_STATE
/* Exception handlers. Very simple, zeroing is done in the wrappers */
.Lbad_source:
jz .Lende
movl $-EFAULT, (%rax)
jmp .Lende
- CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/page_types.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
.text
ENTRY(__get_user_1)
- CFI_STARTPROC
GET_THREAD_INFO(%_ASM_DX)
cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
jae bad_get_user
xor %eax,%eax
ASM_CLAC
ret
- CFI_ENDPROC
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
- CFI_STARTPROC
add $1,%_ASM_AX
jc bad_get_user
GET_THREAD_INFO(%_ASM_DX)
xor %eax,%eax
ASM_CLAC
ret
- CFI_ENDPROC
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
- CFI_STARTPROC
add $3,%_ASM_AX
jc bad_get_user
GET_THREAD_INFO(%_ASM_DX)
xor %eax,%eax
ASM_CLAC
ret
- CFI_ENDPROC
ENDPROC(__get_user_4)
ENTRY(__get_user_8)
- CFI_STARTPROC
#ifdef CONFIG_X86_64
add $7,%_ASM_AX
jc bad_get_user
ASM_CLAC
ret
#endif
- CFI_ENDPROC
ENDPROC(__get_user_8)
bad_get_user:
- CFI_STARTPROC
xor %edx,%edx
mov $(-EFAULT),%_ASM_AX
ASM_CLAC
ret
- CFI_ENDPROC
END(bad_get_user)
#ifdef CONFIG_X86_32
bad_get_user_8:
- CFI_STARTPROC
xor %edx,%edx
xor %ecx,%ecx
mov $(-EFAULT),%_ASM_AX
ASM_CLAC
ret
- CFI_ENDPROC
END(bad_get_user_8)
#endif
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
/*
* override generic version in lib/iomap_copy.c
*/
ENTRY(__iowrite32_copy)
- CFI_STARTPROC
movl %edx,%ecx
rep movsd
ret
- CFI_ENDPROC
ENDPROC(__iowrite32_copy)
#include <linux/linkage.h>
#include <asm/cpufeature.h>
-#include <asm/dwarf2.h>
#include <asm/alternative-asm.h>
/*
ENDPROC(memcpy_erms)
ENTRY(memcpy_orig)
- CFI_STARTPROC
movq %rdi, %rax
cmpq $0x20, %rdx
.Lend:
retq
- CFI_ENDPROC
ENDPROC(memcpy_orig)
* - Copyright 2011 Fenghua Yu <fenghua.yu@intel.com>
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
ENTRY(memmove)
ENTRY(__memmove)
- CFI_STARTPROC
/* Handle more 32 bytes in loop */
mov %rdi, %rax
movb %r11b, (%rdi)
13:
retq
- CFI_ENDPROC
ENDPROC(__memmove)
ENDPROC(memmove)
/* Copyright 2002 Andi Kleen, SuSE Labs */
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
ENDPROC(memset_erms)
ENTRY(memset_orig)
- CFI_STARTPROC
movq %rdi,%r10
/* expand byte value */
movl %edi,%r9d
andl $7,%r9d
jnz .Lbad_alignment
- CFI_REMEMBER_STATE
.Lafter_bad_alignment:
movq %rdx,%rcx
movq %r10,%rax
ret
- CFI_RESTORE_STATE
.Lbad_alignment:
cmpq $7,%rdx
jbe .Lhandle_7
subq %r8,%rdx
jmp .Lafter_bad_alignment
.Lfinal:
- CFI_ENDPROC
ENDPROC(memset_orig)
#include <linux/linkage.h>
#include <linux/errno.h>
-#include <asm/dwarf2.h>
#include <asm/asm.h>
#include <asm/msr.h>
*/
.macro op_safe_regs op
ENTRY(\op\()_safe_regs)
- CFI_STARTPROC
- pushq_cfi_reg rbx
- pushq_cfi_reg rbp
+ pushq %rbx
+ pushq %rbp
movq %rdi, %r10 /* Save pointer */
xorl %r11d, %r11d /* Return value */
movl (%rdi), %eax
movl 20(%rdi), %ebp
movl 24(%rdi), %esi
movl 28(%rdi), %edi
- CFI_REMEMBER_STATE
1: \op
2: movl %eax, (%r10)
movl %r11d, %eax /* Return value */
movl %ebp, 20(%r10)
movl %esi, 24(%r10)
movl %edi, 28(%r10)
- popq_cfi_reg rbp
- popq_cfi_reg rbx
+ popq %rbp
+ popq %rbx
ret
3:
- CFI_RESTORE_STATE
movl $-EIO, %r11d
jmp 2b
_ASM_EXTABLE(1b, 3b)
- CFI_ENDPROC
ENDPROC(\op\()_safe_regs)
.endm
.macro op_safe_regs op
ENTRY(\op\()_safe_regs)
- CFI_STARTPROC
- pushl_cfi_reg ebx
- pushl_cfi_reg ebp
- pushl_cfi_reg esi
- pushl_cfi_reg edi
- pushl_cfi $0 /* Return value */
- pushl_cfi %eax
+ pushl %ebx
+ pushl %ebp
+ pushl %esi
+ pushl %edi
+ pushl $0 /* Return value */
+ pushl %eax
movl 4(%eax), %ecx
movl 8(%eax), %edx
movl 12(%eax), %ebx
movl 24(%eax), %esi
movl 28(%eax), %edi
movl (%eax), %eax
- CFI_REMEMBER_STATE
1: \op
-2: pushl_cfi %eax
+2: pushl %eax
movl 4(%esp), %eax
- popl_cfi (%eax)
+ popl (%eax)
addl $4, %esp
- CFI_ADJUST_CFA_OFFSET -4
movl %ecx, 4(%eax)
movl %edx, 8(%eax)
movl %ebx, 12(%eax)
movl %ebp, 20(%eax)
movl %esi, 24(%eax)
movl %edi, 28(%eax)
- popl_cfi %eax
- popl_cfi_reg edi
- popl_cfi_reg esi
- popl_cfi_reg ebp
- popl_cfi_reg ebx
+ popl %eax
+ popl %edi
+ popl %esi
+ popl %ebp
+ popl %ebx
ret
3:
- CFI_RESTORE_STATE
movl $-EIO, 4(%esp)
jmp 2b
_ASM_EXTABLE(1b, 3b)
- CFI_ENDPROC
ENDPROC(\op\()_safe_regs)
.endm
* return value.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/thread_info.h>
#include <asm/errno.h>
#include <asm/asm.h>
* as they get called from within inline assembly.
*/
-#define ENTER CFI_STARTPROC ; \
- GET_THREAD_INFO(%_ASM_BX)
+#define ENTER GET_THREAD_INFO(%_ASM_BX)
#define EXIT ASM_CLAC ; \
- ret ; \
- CFI_ENDPROC
+ ret
.text
ENTRY(__put_user_1)
ENDPROC(__put_user_8)
bad_put_user:
- CFI_STARTPROC
movl $-EFAULT,%eax
EXIT
END(bad_put_user)
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
#define __ASM_HALF_REG(reg) __ASM_SEL(reg, e##reg)
#define __ASM_HALF_SIZE(inst) __ASM_SEL(inst##w, inst##l)
*/
#define save_common_regs \
- pushl_cfi_reg ecx
+ pushl %ecx
#define restore_common_regs \
- popl_cfi_reg ecx
+ popl %ecx
/* Avoid uglifying the argument copying x86-64 needs to do. */
.macro movq src, dst
*/
#define save_common_regs \
- pushq_cfi_reg rdi; \
- pushq_cfi_reg rsi; \
- pushq_cfi_reg rcx; \
- pushq_cfi_reg r8; \
- pushq_cfi_reg r9; \
- pushq_cfi_reg r10; \
- pushq_cfi_reg r11
+ pushq %rdi; \
+ pushq %rsi; \
+ pushq %rcx; \
+ pushq %r8; \
+ pushq %r9; \
+ pushq %r10; \
+ pushq %r11
#define restore_common_regs \
- popq_cfi_reg r11; \
- popq_cfi_reg r10; \
- popq_cfi_reg r9; \
- popq_cfi_reg r8; \
- popq_cfi_reg rcx; \
- popq_cfi_reg rsi; \
- popq_cfi_reg rdi
+ popq %r11; \
+ popq %r10; \
+ popq %r9; \
+ popq %r8; \
+ popq %rcx; \
+ popq %rsi; \
+ popq %rdi
#endif
/* Fix up special calling conventions */
ENTRY(call_rwsem_down_read_failed)
- CFI_STARTPROC
save_common_regs
- __ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(push,) %__ASM_REG(dx)
movq %rax,%rdi
call rwsem_down_read_failed
- __ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(pop,) %__ASM_REG(dx)
restore_common_regs
ret
- CFI_ENDPROC
ENDPROC(call_rwsem_down_read_failed)
ENTRY(call_rwsem_down_write_failed)
- CFI_STARTPROC
save_common_regs
movq %rax,%rdi
call rwsem_down_write_failed
restore_common_regs
ret
- CFI_ENDPROC
ENDPROC(call_rwsem_down_write_failed)
ENTRY(call_rwsem_wake)
- CFI_STARTPROC
/* do nothing if still outstanding active readers */
__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
jnz 1f
call rwsem_wake
restore_common_regs
1: ret
- CFI_ENDPROC
ENDPROC(call_rwsem_wake)
ENTRY(call_rwsem_downgrade_wake)
- CFI_STARTPROC
save_common_regs
- __ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(push,) %__ASM_REG(dx)
movq %rax,%rdi
call rwsem_downgrade_wake
- __ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+ __ASM_SIZE(pop,) %__ASM_REG(dx)
restore_common_regs
ret
- CFI_ENDPROC
ENDPROC(call_rwsem_downgrade_wake)
*/
#include <linux/linkage.h>
#include <asm/asm.h>
- #include <asm/dwarf2.h>
/* put return address in eax (arg1) */
.macro THUNK name, func, put_ret_addr_in_eax=0
.globl \name
\name:
- CFI_STARTPROC
- pushl_cfi_reg eax
- pushl_cfi_reg ecx
- pushl_cfi_reg edx
+ pushl %eax
+ pushl %ecx
+ pushl %edx
.if \put_ret_addr_in_eax
/* Place EIP in the arg1 */
.endif
call \func
- popl_cfi_reg edx
- popl_cfi_reg ecx
- popl_cfi_reg eax
+ popl %edx
+ popl %ecx
+ popl %eax
ret
- CFI_ENDPROC
_ASM_NOKPROBE(\name)
.endm
* Subject to the GNU public license, v.2. No warranty of any kind.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
#include <asm/calling.h>
#include <asm/asm.h>
.macro THUNK name, func, put_ret_addr_in_rdi=0
.globl \name
\name:
- CFI_STARTPROC
/* this one pushes 9 elems, the next one would be %rIP */
- pushq_cfi_reg rdi
- pushq_cfi_reg rsi
- pushq_cfi_reg rdx
- pushq_cfi_reg rcx
- pushq_cfi_reg rax
- pushq_cfi_reg r8
- pushq_cfi_reg r9
- pushq_cfi_reg r10
- pushq_cfi_reg r11
+ pushq %rdi
+ pushq %rsi
+ pushq %rdx
+ pushq %rcx
+ pushq %rax
+ pushq %r8
+ pushq %r9
+ pushq %r10
+ pushq %r11
.if \put_ret_addr_in_rdi
/* 9*8(%rsp) is return addr on stack */
- movq_cfi_restore 9*8, rdi
+ movq 9*8(%rsp), %rdi
.endif
call \func
jmp restore
- CFI_ENDPROC
_ASM_NOKPROBE(\name)
.endm
#if defined(CONFIG_TRACE_IRQFLAGS) \
|| defined(CONFIG_DEBUG_LOCK_ALLOC) \
|| defined(CONFIG_PREEMPT)
- CFI_STARTPROC
- CFI_ADJUST_CFA_OFFSET 9*8
restore:
- popq_cfi_reg r11
- popq_cfi_reg r10
- popq_cfi_reg r9
- popq_cfi_reg r8
- popq_cfi_reg rax
- popq_cfi_reg rcx
- popq_cfi_reg rdx
- popq_cfi_reg rsi
- popq_cfi_reg rdi
+ popq %r11
+ popq %r10
+ popq %r9
+ popq %r8
+ popq %rax
+ popq %rcx
+ popq %rdx
+ popq %rsi
+ popq %rdi
ret
- CFI_ENDPROC
_ASM_NOKPROBE(restore)
#endif
* of the License.
*/
#include <linux/linkage.h>
-#include <asm/dwarf2.h>
/*
* Calling convention :
projects / linux-2.6-block.git / commitdiff