}
if (rc) {
- dprintk(1, "%s: scancode = 0x%08x\n", __func__, scancode);
- rc_keydown(ir->rc, scancode, toggle);
+ dprintk(1, "%s: proto = 0x%04x, scancode = 0x%08x\n",
+ __func__, protocol, scancode);
+ rc_keydown(ir->rc, protocol, scancode, toggle);
}
return 0;
}
if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
(ir->mask_keyup && !(gpio & ir->mask_keyup))) {
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
} else {
/* HACK: Probably, ir->mask_keydown is missing
for this board */
if (btv->c.type == BTTV_BOARD_WINFAST2000)
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
rc_keyup(ir->dev);
}
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "up/down");
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
if (keyup)
rc_keyup(ir->dev);
} else {
if (keyup)
rc_keyup(ir->dev);
else
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
}
ir->last_gpio = data | keyup;
return;
}
- scancode = system << 8 | command;
- rc_keydown(ir->dev, scancode, toggle);
+ scancode = RC_SCANCODE_RC5(system, command);
+ rc_keydown(ir->dev, RC_TYPE_RC5, scancode, toggle);
dprintk("scancode %x, toggle %x\n", scancode, toggle);
}
data = (data << 4) | ((gpio_key & 0xf0) >> 4);
- rc_keydown(ir->dev, data, 0);
+ rc_keydown(ir->dev, RC_TYPE_UNKNOWN, data, 0);
+
+ } else if (ir->core->boardnr == CX88_BOARD_PROLINK_PLAYTVPVR ||
+ ir->core->boardnr == CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO) {
+ /* bit cleared on keydown, NEC scancode, 0xAAAACC, A = 0x866b */
+ u16 addr;
+ u8 cmd;
+ u32 scancode;
+
+ addr = (data >> 8) & 0xffff;
+ cmd = (data >> 0) & 0x00ff;
+ scancode = RC_SCANCODE_NECX(addr, cmd);
+
+ if (0 == (gpio & ir->mask_keyup))
+ rc_keydown_notimeout(ir->dev, RC_TYPE_NEC, scancode, 0);
+ else
+ rc_keyup(ir->dev);
} else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown)
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
else
rc_keyup(ir->dev);
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup))
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
else
rc_keyup(ir->dev);
} else {
/* can't distinguish keydown/up :-/ */
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
rc_keyup(ir->dev);
}
}
* 002-T mini RC, provided with newer PV hardware
*/
ir_codes = RC_MAP_PIXELVIEW_MK12;
+ rc_type = RC_BIT_NEC;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keyup = 0x80;
ir->polling = 10; /* ms */
break;
case CX88_BOARD_TWINHAN_VP1027_DVBS:
ir_codes = RC_MAP_TWINHAN_VP1027_DVBS;
- rc_type = RC_BIT_NEC;
ir->sampling = 0xff00; /* address */
break;
}
data = (ircom >> 8) & 0x7f;
- rc_keydown(ir->dev, data, 0);
+ /* FIXME: UNKNOWN because we don't generate a full NEC scancode (yet?) */
+ rc_keydown(ir->dev, RC_TYPE_UNKNOWN, data, 0);
}
/* work handler */
if (data == ir->mask_keycode)
rc_keyup(ir->dev);
else
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
return 0;
}
if (ir->polling) {
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
} else {
rc_keyup(ir->dev);
}
else { /* IRQ driven mode - handle key press and release in one go */
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
rc_keyup(ir->dev);
}
}
return;
if (budget_ci->ir.full_rc5) {
- rc_keydown(dev,
- budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key,
- (command & 0x20) ? 1 : 0);
+ rc_keydown(dev, RC_TYPE_RC5,
+ RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key),
+ !!(command & 0x20));
return;
}
/* FIXME: We should generate complete scancodes for all devices */
- rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
+ rc_keydown(dev, RC_TYPE_UNKNOWN, budget_ci->ir.ir_key, !!(command & 0x20));
}
static int msp430_ir_init(struct budget_ci *budget_ci)
* it would cause ghost repeats which would be a
* regression for this driver.
*/
- rc_keydown_notimeout(ati_remote->rdev, scancode,
- data[2]);
+ rc_keydown_notimeout(ati_remote->rdev, RC_TYPE_OTHER,
+ scancode, data[2]);
rc_keyup(ati_remote->rdev);
}
return;
static int img_ir_set_normal_filter(struct rc_dev *dev,
struct rc_scancode_filter *sc_filter)
{
- return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter);
+ return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter);
}
static int img_ir_set_wakeup_filter(struct rc_dev *dev,
struct img_ir_priv_hw *hw = &priv->hw;
const struct img_ir_decoder *dec = hw->decoder;
int ret = IMG_IR_SCANCODE;
- int scancode;
+ u32 scancode;
+ enum rc_type protocol = RC_TYPE_UNKNOWN;
+
if (dec->scancode)
- ret = dec->scancode(len, raw, &scancode, hw->enabled_protocols);
+ ret = dec->scancode(len, raw, &protocol, &scancode, hw->enabled_protocols);
else if (len >= 32)
scancode = (u32)raw;
else if (len < 32)
len, (unsigned long long)raw);
if (ret == IMG_IR_SCANCODE) {
dev_dbg(priv->dev, "decoded scan code %#x\n", scancode);
- rc_keydown(hw->rdev, scancode, 0);
+ rc_keydown(hw->rdev, protocol, scancode, 0);
img_ir_end_repeat(priv);
} else if (ret == IMG_IR_REPEATCODE) {
if (hw->mode == IMG_IR_M_REPEATING) {
struct img_ir_control control;
/* scancode logic */
- int (*scancode)(int len, u64 raw, int *scancode, u64 protocols);
+ int (*scancode)(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols);
int (*filter)(const struct rc_scancode_filter *in,
struct img_ir_filter *out, u64 protocols);
};
#include "img-ir-hw.h"
/* Convert JVC data to a scancode */
-static int img_ir_jvc_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_jvc_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int cust, data;
cust = (raw >> 0) & 0xff;
data = (raw >> 8) & 0xff;
+ *protocol = RC_TYPE_JVC;
*scancode = cust << 8 | data;
return IMG_IR_SCANCODE;
}
#include <linux/bitrev.h>
/* Convert NEC data to a scancode */
-static int img_ir_nec_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_nec_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int addr, addr_inv, data, data_inv;
/* a repeat code has no data */
*scancode = addr << 8 |
data;
}
+ *protocol = RC_TYPE_NEC;
return IMG_IR_SCANCODE;
}
#include "img-ir-hw.h"
/* Convert Sanyo data to a scancode */
-static int img_ir_sanyo_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_sanyo_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int addr, addr_inv, data, data_inv;
/* a repeat code has no data */
return -EINVAL;
/* Normal Sanyo */
+ *protocol = RC_TYPE_SANYO;
*scancode = addr << 8 | data;
return IMG_IR_SCANCODE;
}
#include "img-ir-hw.h"
/* Convert Sharp data to a scancode */
-static int img_ir_sharp_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_sharp_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int addr, cmd, exp, chk;
/* probably the second half of the message */
return -EINVAL;
+ *protocol = RC_TYPE_SHARP;
*scancode = addr << 8 | cmd;
return IMG_IR_SCANCODE;
}
#include "img-ir-hw.h"
/* Convert Sony data to a scancode */
-static int img_ir_sony_scancode(int len, u64 raw, int *scancode, u64 protocols)
+static int img_ir_sony_scancode(int len, u64 raw, enum rc_type *protocol,
+ u32 *scancode, u64 enabled_protocols)
{
unsigned int dev, subdev, func;
switch (len) {
case 12:
- if (!(protocols & RC_BIT_SONY12))
+ if (!(enabled_protocols & RC_BIT_SONY12))
return -EINVAL;
func = raw & 0x7f; /* first 7 bits */
raw >>= 7;
dev = raw & 0x1f; /* next 5 bits */
subdev = 0;
+ *protocol = RC_TYPE_SONY12;
break;
case 15:
- if (!(protocols & RC_BIT_SONY15))
+ if (!(enabled_protocols & RC_BIT_SONY15))
return -EINVAL;
func = raw & 0x7f; /* first 7 bits */
raw >>= 7;
dev = raw & 0xff; /* next 8 bits */
subdev = 0;
+ *protocol = RC_TYPE_SONY15;
break;
case 20:
- if (!(protocols & RC_BIT_SONY20))
+ if (!(enabled_protocols & RC_BIT_SONY20))
return -EINVAL;
func = raw & 0x7f; /* first 7 bits */
raw >>= 7;
dev = raw & 0x1f; /* next 5 bits */
raw >>= 5;
subdev = raw & 0xff; /* next 8 bits */
+ *protocol = RC_TYPE_SONY20;
break;
default:
return -EINVAL;
if (press_type == 0)
rc_keyup(ictx->rdev);
else {
- rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+ if (ictx->rc_type == RC_BIT_RC6_MCE)
+ rc_keydown(ictx->rdev,
+ ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER,
+ ictx->rc_scancode, ictx->rc_toggle);
spin_lock_irqsave(&ictx->kc_lock, flags);
ictx->last_keycode = ictx->kc;
spin_unlock_irqrestore(&ictx->kc_lock, flags);
scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
(bitrev8((data->bits >> 0) & 0xff) << 0);
IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
- rc_keydown(dev, scancode, data->toggle);
+ rc_keydown(dev, RC_TYPE_JVC, scancode, data->toggle);
data->first = false;
data->old_bits = data->bits;
} else if (data->bits == data->old_bits) {
if (data->is_nec_x)
data->necx_repeat = true;
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, RC_TYPE_NEC, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
struct rc5_dec *data = &dev->raw->rc5;
u8 toggle;
u32 scancode;
+ enum rc_type protocol;
if (!rc_protocols_enabled(dev, RC_BIT_RC5 | RC_BIT_RC5X))
return 0;
toggle = (data->bits & 0x20000) ? 1 : 0;
command += (data->bits & 0x01000) ? 0 : 0x40;
scancode = system << 16 | command << 8 | xdata;
+ protocol = RC_TYPE_RC5X;
IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
scancode, toggle);
toggle = (data->bits & 0x00800) ? 1 : 0;
command += (data->bits & 0x01000) ? 0 : 0x40;
scancode = system << 8 | command;
+ protocol = RC_TYPE_RC5;
IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
}
- rc_keydown(dev, scancode, toggle);
+ rc_keydown(dev, protocol, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
- rc_keydown(dev, scancode, toggle);
+ rc_keydown(dev, RC_TYPE_RC5_SZ, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
struct rc6_dec *data = &dev->raw->rc6;
u32 scancode;
u8 toggle;
+ enum rc_type protocol;
if (!rc_protocols_enabled(dev, RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
case RC6_MODE_0:
scancode = data->body;
toggle = data->toggle;
+ protocol = RC_TYPE_RC6_0;
IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
break;
+
case RC6_MODE_6A:
if (data->count > CHAR_BIT * sizeof data->body) {
IR_dprintk(1, "RC6 too many (%u) data bits\n",
}
scancode = data->body;
- if (data->count == RC6_6A_32_NBITS &&
- (scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
- /* MCE RC */
- toggle = (scancode & RC6_6A_MCE_TOGGLE_MASK) ? 1 : 0;
- scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
- } else {
+ switch (data->count) {
+ case 20:
+ protocol = RC_TYPE_RC6_6A_20;
+ toggle = 0;
+ break;
+ case 24:
+ protocol = RC_BIT_RC6_6A_24;
toggle = 0;
+ break;
+ case 32:
+ if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
+ protocol = RC_TYPE_RC6_MCE;
+ scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
+ toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
+ } else {
+ protocol = RC_BIT_RC6_6A_32;
+ toggle = 0;
+ }
+ break;
+ default:
+ IR_dprintk(1, "RC6(6A) unsupported length\n");
+ goto out;
}
- IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
- scancode, toggle);
+
+ IR_dprintk(1, "RC6(6A) proto 0x%04x, scancode 0x%08x (toggle: %u)\n",
+ protocol, scancode, toggle);
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
- rc_keydown(dev, scancode, toggle);
+ rc_keydown(dev, protocol, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
scancode = address << 8 | command;
IR_dprintk(1, "SANYO scancode: 0x%06x\n", scancode);
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, RC_TYPE_SANYO, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
scancode = address << 8 | command;
IR_dprintk(1, "Sharp scancode 0x%04x\n", scancode);
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, RC_TYPE_SHARP, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct sony_dec *data = &dev->raw->sony;
+ enum rc_type protocol;
u32 scancode;
u8 device, subdevice, function;
device = bitrev8((data->bits << 3) & 0xF8);
subdevice = 0;
function = bitrev8((data->bits >> 4) & 0xFE);
+ protocol = RC_TYPE_SONY12;
break;
case 15:
if (!rc_protocols_enabled(dev, RC_BIT_SONY15)) {
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
function = bitrev8((data->bits >> 7) & 0xFE);
+ protocol = RC_TYPE_SONY15;
break;
case 20:
if (!rc_protocols_enabled(dev, RC_BIT_SONY20)) {
device = bitrev8((data->bits >> 5) & 0xF8);
subdevice = bitrev8((data->bits >> 0) & 0xFF);
function = bitrev8((data->bits >> 12) & 0xFE);
+ protocol = RC_TYPE_SONY20;
break;
default:
IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
scancode = device << 16 | subdevice << 8 | function;
IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
- rc_keydown(dev, scancode, 0);
+ rc_keydown(dev, protocol, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
/**
* ir_do_keydown() - internal function to process a keypress
* @dev: the struct rc_dev descriptor of the device
+ * @protocol: the protocol of the keypress
* @scancode: the scancode of the keypress
* @keycode: the keycode of the keypress
* @toggle: the toggle value of the keypress
* This function is used internally to register a keypress, it must be
* called with keylock held.
*/
-static void ir_do_keydown(struct rc_dev *dev, int scancode,
- u32 keycode, u8 toggle)
+static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol,
+ u32 scancode, u32 keycode, u8 toggle)
{
bool new_event = (!dev->keypressed ||
+ dev->last_protocol != protocol ||
dev->last_scancode != scancode ||
- dev->last_toggle != toggle);
+ dev->last_toggle != toggle);
if (new_event && dev->keypressed)
ir_do_keyup(dev, false);
if (new_event && keycode != KEY_RESERVED) {
/* Register a keypress */
dev->keypressed = true;
+ dev->last_protocol = protocol;
dev->last_scancode = scancode;
dev->last_toggle = toggle;
dev->last_keycode = keycode;
IR_dprintk(1, "%s: key down event, "
- "key 0x%04x, scancode 0x%04x\n",
- dev->input_name, keycode, scancode);
+ "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
+ dev->input_name, keycode, protocol, scancode);
input_report_key(dev->input_dev, keycode, 1);
led_trigger_event(led_feedback, LED_FULL);
/**
* rc_keydown() - generates input event for a key press
* @dev: the struct rc_dev descriptor of the device
- * @scancode: the scancode that we're seeking
+ * @protocol: the protocol for the keypress
+ * @scancode: the scancode for the keypress
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
* support toggle values, this should be set to zero)
*
* This routine is used to signal that a key has been pressed on the
* remote control.
*/
-void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle)
{
unsigned long flags;
u32 keycode = rc_g_keycode_from_table(dev, scancode);
spin_lock_irqsave(&dev->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
+ ir_do_keydown(dev, protocol, scancode, keycode, toggle);
if (dev->keypressed) {
dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
* rc_keydown_notimeout() - generates input event for a key press without
* an automatic keyup event at a later time
* @dev: the struct rc_dev descriptor of the device
- * @scancode: the scancode that we're seeking
+ * @protocol: the protocol for the keypress
+ * @scancode: the scancode for the keypress
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
* support toggle values, this should be set to zero)
*
* This routine is used to signal that a key has been pressed on the
* remote control. The driver must manually call rc_keyup() at a later stage.
*/
-void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol,
+ u32 scancode, u8 toggle)
{
unsigned long flags;
u32 keycode = rc_g_keycode_from_table(dev, scancode);
spin_lock_irqsave(&dev->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
+ ir_do_keydown(dev, protocol, scancode, keycode, toggle);
spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
dev->dev.groups = dev->sysfs_groups;
dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
if (dev->s_filter)
- dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
+ dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
if (dev->s_wakeup_filter)
dev->sysfs_groups[attr++] = &rc_dev_wakeup_filter_attr_grp;
if (dev->change_wakeup_protocol)
if ((state->rc_repeat != buf[6] || buf[0]) &&
!memcmp(&buf[12], state->rc_last, 4)) {
dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__);
- rc_keydown(d->rc_dev, state->rc_keycode, 0);
+ rc_repeat(d->rc_dev);
state->rc_repeat = buf[6];
return ret;
}
if (buf[14] == (u8) ~buf[15]) {
if (buf[12] == (u8) ~buf[13]) {
/* NEC */
- state->rc_keycode = buf[12] << 8 | buf[14];
+ state->rc_keycode = RC_SCANCODE_NEC(buf[12],
+ buf[14]);
} else {
/* NEC extended*/
- state->rc_keycode = buf[12] << 16 |
- buf[13] << 8 | buf[14];
+ state->rc_keycode = RC_SCANCODE_NECX(buf[12] << 8 |
+ buf[13],
+ buf[14]);
}
} else {
/* 32 bit NEC */
- state->rc_keycode = buf[12] << 24 | buf[13] << 16 |
- buf[14] << 8 | buf[15];
+ state->rc_keycode = RC_SCANCODE_NEC32(buf[12] << 24 |
+ buf[13] << 16 |
+ buf[14] << 8 |
+ buf[15]);
}
- rc_keydown(d->rc_dev, state->rc_keycode, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, state->rc_keycode, 0);
} else {
dev_dbg(&d->udev->dev, "%s: no key press\n", __func__);
/* Invalidate last keypress */
if ((buf[2] + buf[3]) == 0xff) {
if ((buf[0] + buf[1]) == 0xff) {
/* NEC standard 16bit */
- key = buf[0] << 8 | buf[2];
+ key = RC_SCANCODE_NEC(buf[0], buf[2]);
} else {
/* NEC extended 24bit */
- key = buf[0] << 16 | buf[1] << 8 | buf[2];
+ key = RC_SCANCODE_NECX(buf[0] << 8 | buf[1], buf[2]);
}
} else {
/* NEC full code 32bit */
- key = buf[0] << 24 | buf[1] << 16 | buf[2] << 8 | buf[3];
+ key = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+ buf[2] << 8 | buf[3]);
}
dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 4, buf);
- rc_keydown(d->rc_dev, key, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, key, 0);
return 0;
if (ircode[0]) {
dev_dbg(&d->udev->dev, "%s: key pressed %02x\n", __func__,
ircode[1]);
- rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC,
+ RC_SCANCODE_NEC(0x08, ircode[1]), 0);
}
return 0;
static int az6007_rc_query(struct dvb_usb_device *d)
{
struct az6007_device_state *st = d_to_priv(d);
- unsigned code = 0;
+ unsigned code;
az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10);
if (st->data[1] == 0x44)
return 0;
- if ((st->data[1] ^ st->data[2]) == 0xff)
- code = st->data[1];
- else
- code = st->data[1] << 8 | st->data[2];
-
- if ((st->data[3] ^ st->data[4]) == 0xff)
- code = code << 8 | st->data[3];
- else
- code = code << 16 | st->data[3] << 8 | st->data[4];
+ if ((st->data[3] ^ st->data[4]) == 0xff) {
+ if ((st->data[1] ^ st->data[2]) == 0xff)
+ code = RC_SCANCODE_NEC(st->data[1], st->data[3]);
+ else
+ code = RC_SCANCODE_NECX(st->data[1] << 8 | st->data[2],
+ st->data[3]);
+ } else {
+ code = RC_SCANCODE_NEC32(st->data[1] << 24 |
+ st->data[2] << 16 |
+ st->data[3] << 8 |
+ st->data[4]);
+ }
- rc_keydown(d->rc_dev, code, st->data[5]);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, code, st->data[5]);
return 0;
}
case 0xaa:
debug_data_snipet(1, "INT Remote data snipet", ibuf);
if ((ibuf[4] + ibuf[5]) == 0xff) {
- key = ibuf[5];
- key += (ibuf[3] > 0)
- ? (ibuf[3] ^ 0xff) << 8 : 0;
- key += (ibuf[2] ^ 0xff) << 16;
+ key = RC_SCANCODE_NECX((ibuf[2] ^ 0xff) << 8 |
+ (ibuf[3] > 0) ? (ibuf[3] ^ 0xff) : 0,
+ ibuf[5]);
deb_info(1, "INT Key =%08x", key);
if (adap_to_d(adap)->rc_dev != NULL)
rc_keydown(adap_to_d(adap)->rc_dev,
- key, 0);
+ RC_TYPE_NEC, key, 0);
}
break;
case 0xbb:
if (buf[2] == (u8) ~buf[3]) {
if (buf[0] == (u8) ~buf[1]) {
/* NEC standard (16 bit) */
- rc_code = buf[0] << 8 | buf[2];
+ rc_code = RC_SCANCODE_NEC(buf[0], buf[2]);
} else {
/* NEC extended (24 bit) */
- rc_code = buf[0] << 16 |
- buf[1] << 8 | buf[2];
+ rc_code = RC_SCANCODE_NECX(buf[0] << 8 | buf[1],
+ buf[2]);
}
} else {
/* NEC full (32 bit) */
- rc_code = buf[0] << 24 | buf[1] << 16 |
- buf[2] << 8 | buf[3];
+ rc_code = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+ buf[2] << 8 | buf[3]);
}
- rc_keydown(d->rc_dev, rc_code, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_NEC, rc_code, 0);
ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
if (ret)
rc5_addr = (cmd & 0x07C0) >> 6; /* bits 7-11 for address */
rc5_toggle = (cmd & 0x0800) >> 11; /* bit 12 for toggle */
keycode = (rc5_addr << 8) | rc5_cmd;
- rc_keydown(d->rc_dev, keycode, rc5_toggle);
+ rc_keydown(d->rc_dev, RC_BIT_RC5, keycode, rc5_toggle);
}
return 0;
{
struct dvb_usb_device *d = purb->context;
struct dib0700_rc_response *poll_reply;
+ enum rc_type protocol;
u32 uninitialized_var(keycode);
u8 toggle;
switch (d->props.rc.core.protocol) {
case RC_BIT_NEC:
+ protocol = RC_TYPE_NEC;
toggle = 0;
/* NEC protocol sends repeat code as 0 0 0 FF */
keycode = RC_SCANCODE_NECX(poll_reply->system << 8 |
poll_reply->not_system,
poll_reply->data);
+
} else {
deb_data("NEC normal protocol\n");
keycode = RC_SCANCODE_NEC(poll_reply->system,
break;
default:
deb_data("RC5 protocol\n");
- /* RC5 Protocol */
+ protocol = RC_TYPE_RC5;
toggle = poll_reply->report_id;
- keycode = poll_reply->system << 8 | poll_reply->data;
+ keycode = RC_SCANCODE_RC5(poll_reply->system, poll_reply->data);
break;
}
goto resubmit;
}
- rc_keydown(d->rc_dev, keycode, toggle);
+ rc_keydown(d->rc_dev, protocol, keycode, toggle);
resubmit:
/* Clean the buffer before we requeue */
static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
{
u8 key[4];
- u32 keycode;
+ enum rc_type protocol;
+ u32 scancode;
u8 toggle;
int i;
struct dib0700_state *st = d->priv;
dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
- d->last_event = 0;
switch (d->props.rc.core.protocol) {
case RC_BIT_NEC:
/* NEC protocol sends repeat code as 0 0 0 FF */
if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
- (key[3] == 0xff))
- keycode = d->last_event;
- else {
- keycode = key[3-2] << 8 | key[3-3];
- d->last_event = keycode;
+ (key[3] == 0xff)) {
+ rc_repeat(d->rc_dev);
+ return 0;
}
- rc_keydown(d->rc_dev, keycode, 0);
+ protocol = RC_TYPE_NEC;
+ scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]);
+ toggle = 0;
break;
+
default:
/* RC-5 protocol changes toggle bit on new keypress */
- keycode = key[3-2] << 8 | key[3-3];
+ protocol = RC_TYPE_RC5;
+ scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]);
toggle = key[3-1];
- rc_keydown(d->rc_dev, keycode, toggle);
-
break;
}
+
+ rc_keydown(d->rc_dev, protocol, scancode, toggle);
return 0;
}
if (msg.buf[0] != 0xff) {
deb_rc("%s: rc code: %x, %x\n",
__func__, key[0], key[1]);
- rc_keydown(d->rc_dev, key[0], 1);
+ rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, key[0], 0);
}
}
if (msg.buf[0] != 0xff) {
deb_rc("%s: rc code: %x, %x\n",
__func__, key[0], key[1]);
- rc_keydown(d->rc_dev, key[0]^0xff, 1);
+ rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, key[0]^0xff, 0);
}
}
if (msg.buf[0] != 0xff) {
deb_rc("%s: rc code: %x, %x\n",
__func__, key[0], key[1]);
- rc_keydown(d->rc_dev, key[1] << 8 | key[0], 1);
+ rc_keydown(d->rc_dev, RC_TYPE_RC5,
+ RC_SCANCODE_RC5(key[1], key[0]), 0);
}
}
else if (state == REMOTE_KEY_REPEAT)
rc_repeat(d->rc_dev);
else
- rc_keydown(d->rc_dev, rc_state[1], 0);
+ rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, rc_state[1], 0);
out:
kfree(rc_state);
if ((rx[3] == 9) && (rx[12] & 0x01)) {
/* got a "press" event */
- state->last_rc_key = (rx[7] << 8) | rx[6];
+ state->last_rc_key = RC_SCANCODE_RC5(rx[7], rx[6]);
if (debug > 2)
info("%s: cmd=0x%02x sys=0x%02x\n",
__func__, rx[6], rx[7]);
- rc_keydown(d->rc_dev, state->last_rc_key, 0);
+ rc_keydown(d->rc_dev, RC_TYPE_RC5, state->last_rc_key, 0);
} else if (state->last_rc_key) {
rc_keyup(d->rc_dev);
state->last_rc_key = 0;
.rc.core = {
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
- .allowed_protos = RC_BIT_UNKNOWN,
+ .allowed_protos = RC_BIT_RC5,
.rc_query = pctv452e_rc_query,
.rc_interval = 100,
},
.rc.core = {
.rc_codes = RC_MAP_TT_1500,
- .allowed_protos = RC_BIT_UNKNOWN,
+ .allowed_protos = RC_BIT_RC5,
.rc_query = pctv452e_rc_query,
.rc_interval = 100,
},
if (rx[8] & 0x01) {
/* got a "press" event */
- st->last_rc_key = (rx[3] << 8) | rx[2];
+ st->last_rc_key = RC_SCANCODE_RC5(rx[3], rx[2]);
deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]);
- rc_keydown(d->rc_dev, st->last_rc_key, rx[1]);
+ rc_keydown(d->rc_dev, RC_TYPE_RC5, st->last_rc_key, rx[1]);
} else if (st->last_rc_key) {
rc_keyup(d->rc_dev);
st->last_rc_key = 0;
.rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */
.rc_codes = RC_MAP_TT_1500,
.rc_query = tt3650_rc_query,
- .allowed_protos = RC_BIT_UNKNOWN,
+ .allowed_protos = RC_BIT_RC5,
},
.num_adapters = 1,
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/slab.h>
+#include <linux/bitrev.h>
#include "em28xx.h"
unsigned int toggle_bit:1;
unsigned int read_count:7;
+ enum rc_type protocol;
u32 scancode;
};
/* i2c slave address of external device (if used) */
u16 i2c_dev_addr;
- int (*get_key_i2c)(struct i2c_client *, u32 *);
+ int (*get_key_i2c)(struct i2c_client *ir, enum rc_type *protocol, u32 *scancode);
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
};
I2C IR based get keycodes - should be used with ir-kbd-i2c
**********************************************************/
-static int em28xx_get_key_terratec(struct i2c_client *i2c_dev, u32 *ir_key)
+static int em28xx_get_key_terratec(struct i2c_client *i2c_dev,
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char b;
/* keep old data */
return 1;
- *ir_key = b;
+ *protocol = RC_TYPE_UNKNOWN;
+ *scancode = b;
return 1;
}
-static int em28xx_get_key_em_haup(struct i2c_client *i2c_dev, u32 *ir_key)
+static int em28xx_get_key_em_haup(struct i2c_client *i2c_dev,
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char buf[2];
- u16 code;
int size;
/* poll IR chip */
* So, the code translation is not complete. Yet, it is enough to
* work with the provided RC5 IR.
*/
- code =
- ((buf[0] & 0x01) ? 0x0020 : 0) | /* 0010 0000 */
- ((buf[0] & 0x02) ? 0x0010 : 0) | /* 0001 0000 */
- ((buf[0] & 0x04) ? 0x0008 : 0) | /* 0000 1000 */
- ((buf[0] & 0x08) ? 0x0004 : 0) | /* 0000 0100 */
- ((buf[0] & 0x10) ? 0x0002 : 0) | /* 0000 0010 */
- ((buf[0] & 0x20) ? 0x0001 : 0) | /* 0000 0001 */
- ((buf[1] & 0x08) ? 0x1000 : 0) | /* 0001 0000 */
- ((buf[1] & 0x10) ? 0x0800 : 0) | /* 0000 1000 */
- ((buf[1] & 0x20) ? 0x0400 : 0) | /* 0000 0100 */
- ((buf[1] & 0x40) ? 0x0200 : 0) | /* 0000 0010 */
- ((buf[1] & 0x80) ? 0x0100 : 0); /* 0000 0001 */
-
- /* return key */
- *ir_key = code;
+ *protocol = RC_TYPE_RC5;
+ *scancode = (bitrev8(buf[1]) & 0x1f) << 8 | bitrev8(buf[0]) >> 2;
return 1;
}
static int em28xx_get_key_pinnacle_usb_grey(struct i2c_client *i2c_dev,
- u32 *ir_key)
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char buf[3];
if (buf[0] != 0x00)
return 0;
- *ir_key = buf[2]&0x3f;
-
+ *protocol = RC_TYPE_UNKNOWN;
+ *scancode = buf[2] & 0x3f;
return 1;
}
static int em28xx_get_key_winfast_usbii_deluxe(struct i2c_client *i2c_dev,
- u32 *ir_key)
+ enum rc_type *protocol, u32 *scancode)
{
unsigned char subaddr, keydetect, key;
if (key == 0x00)
return 0;
- *ir_key = key;
+ *protocol = RC_TYPE_UNKNOWN;
+ *scancode = key;
return 1;
}
poll_result->read_count = (msg[0] & 0x7f);
/* Remote Control Address/Data (Regs 0x46/0x47) */
- poll_result->scancode = msg[1] << 8 | msg[2];
+ switch (ir->rc_type) {
+ case RC_BIT_RC5:
+ poll_result->protocol = RC_TYPE_RC5;
+ poll_result->scancode = RC_SCANCODE_RC5(msg[1], msg[2]);
+ break;
+
+ case RC_BIT_NEC:
+ poll_result->protocol = RC_TYPE_NEC;
+ poll_result->scancode = RC_SCANCODE_NEC(msg[1], msg[2]);
+ break;
+
+ default:
+ poll_result->protocol = RC_TYPE_UNKNOWN;
+ poll_result->scancode = msg[1] << 8 | msg[2];
+ break;
+ }
return 0;
}
*/
switch (ir->rc_type) {
case RC_BIT_RC5:
- poll_result->scancode = msg[1] << 8 | msg[2];
+ poll_result->protocol = RC_TYPE_RC5;
+ poll_result->scancode = RC_SCANCODE_RC5(msg[1], msg[2]);
break;
+
case RC_BIT_NEC:
+ poll_result->protocol = RC_TYPE_RC5;
+ poll_result->scancode = msg[1] << 8 | msg[2];
if ((msg[3] ^ msg[4]) != 0xff) /* 32 bits NEC */
- poll_result->scancode = (msg[1] << 24) |
- (msg[2] << 16) |
- (msg[3] << 8) |
- msg[4];
+ poll_result->scancode = RC_SCANCODE_NEC32((msg[1] << 24) |
+ (msg[2] << 16) |
+ (msg[3] << 8) |
+ (msg[4]));
else if ((msg[1] ^ msg[2]) != 0xff) /* 24 bits NEC */
- poll_result->scancode = (msg[1] << 16) |
- (msg[2] << 8) |
- msg[3];
+ poll_result->scancode = RC_SCANCODE_NECX(msg[1] << 8 |
+ msg[2], msg[3]);
else /* Normal NEC */
- poll_result->scancode = msg[1] << 8 | msg[3];
+ poll_result->scancode = RC_SCANCODE_NEC(msg[1], msg[3]);
break;
+
case RC_BIT_RC6_0:
- poll_result->scancode = msg[1] << 8 | msg[2];
+ poll_result->protocol = RC_TYPE_RC6_0;
+ poll_result->scancode = RC_SCANCODE_RC6_0(msg[1], msg[2]);
break;
+
default:
+ poll_result->protocol = RC_TYPE_UNKNOWN;
poll_result->scancode = (msg[1] << 24) | (msg[2] << 16) |
(msg[3] << 8) | msg[4];
break;
static int em28xx_i2c_ir_handle_key(struct em28xx_IR *ir)
{
struct em28xx *dev = ir->dev;
- static u32 ir_key;
+ static u32 scancode;
+ enum rc_type protocol;
int rc;
struct i2c_client client;
client.adapter = &ir->dev->i2c_adap[dev->def_i2c_bus];
client.addr = ir->i2c_dev_addr;
- rc = ir->get_key_i2c(&client, &ir_key);
+ rc = ir->get_key_i2c(&client, &protocol, &scancode);
if (rc < 0) {
dprintk("ir->get_key_i2c() failed: %d\n", rc);
return rc;
}
if (rc) {
- dprintk("%s: keycode = 0x%04x\n", __func__, ir_key);
- rc_keydown(ir->rc, ir_key, 0);
+ dprintk("%s: proto = 0x%04x, scancode = 0x%04x\n",
+ __func__, protocol, scancode);
+ rc_keydown(ir->rc, protocol, scancode, 0);
}
return 0;
}
poll_result.scancode);
if (ir->full_code)
rc_keydown(ir->rc,
+ poll_result.protocol,
poll_result.scancode,
poll_result.toggle_bit);
else
rc_keydown(ir->rc,
+ RC_TYPE_UNKNOWN,
poll_result.scancode & 0xff,
poll_result.toggle_bit);
return 0;
}
+static void tm6000_ir_keydown(struct tm6000_IR *ir,
+ const char *buf, unsigned int len)
+{
+ u8 device, command;
+ u32 scancode;
+ enum rc_type protocol;
+
+ if (len < 1)
+ return;
+
+ command = buf[0];
+ device = (len > 1 ? buf[1] : 0x0);
+ switch (ir->rc_type) {
+ case RC_BIT_RC5:
+ protocol = RC_TYPE_RC5;
+ scancode = RC_SCANCODE_RC5(device, command);
+ break;
+ case RC_BIT_NEC:
+ protocol = RC_TYPE_NEC;
+ scancode = RC_SCANCODE_NEC(device, command);
+ break;
+ default:
+ protocol = RC_TYPE_OTHER;
+ scancode = RC_SCANCODE_OTHER(device << 8 | command);
+ break;
+ }
+
+ dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n",
+ __func__, protocol, scancode);
+ rc_keydown(ir->rc, protocol, scancode, 0);
+}
+
static void tm6000_ir_urb_received(struct urb *urb)
{
struct tm6000_core *dev = urb->context;
struct tm6000_IR *ir = dev->ir;
- struct tm6000_ir_poll_result poll_result;
char *buf;
dprintk(2, "%s\n",__func__);
DUMP_PREFIX_OFFSET,16, 1,
buf, urb->actual_length, false);
- poll_result.rc_data = buf[0];
- if (urb->actual_length > 1)
- poll_result.rc_data |= buf[1] << 8;
-
- dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
- rc_keydown(ir->rc, poll_result.rc_data, 0);
+ tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length);
usb_submit_urb(urb, GFP_ATOMIC);
/*
{
struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
struct tm6000_core *dev = ir->dev;
- struct tm6000_ir_poll_result poll_result;
int rc;
u8 buf[2];
if (rc < 0)
return;
- if (rc > 1)
- poll_result.rc_data = buf[0] | buf[1] << 8;
- else
- poll_result.rc_data = buf[0];
-
/* Check if something was read */
- if ((poll_result.rc_data & 0xff) == 0xff) {
+ if ((buf[0] & 0xff) == 0xff) {
if (!ir->pwled) {
tm6000_flash_led(dev, 1);
ir->pwled = 1;
return;
}
- dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
- rc_keydown(ir->rc, poll_result.rc_data, 0);
+ tm6000_ir_keydown(ir, buf, rc);
tm6000_flash_led(dev, 0);
ir->pwled = 0;
* @keyup_jiffies: time (in jiffies) when the current keypress should be released
* @timer_keyup: timer for releasing a keypress
* @last_keycode: keycode of last keypress
+ * @last_protocol: protocol of last keypress
* @last_scancode: scancode of last keypress
* @last_toggle: toggle value of last command
* @timeout: optional time after which device stops sending data
* device doesn't interrupt host until it sees IR pulses
* @s_learning_mode: enable wide band receiver used for learning
* @s_carrier_report: enable carrier reports
- * @s_filter: set the scancode filter
+ * @s_filter: set the scancode filter
* @s_wakeup_filter: set the wakeup scancode filter
*/
struct rc_dev {
unsigned long keyup_jiffies;
struct timer_list timer_keyup;
u32 last_keycode;
+ enum rc_type last_protocol;
u32 last_scancode;
u8 last_toggle;
u32 timeout;
void rc_close(struct rc_dev *rdev);
void rc_repeat(struct rc_dev *dev);
-void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
-void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle);
void rc_keyup(struct rc_dev *dev);
u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
projects / linux-2.6-block.git / commitdiff