drivers/usb/dwc3/core.c

   1 /**
   2  * core.c - DesignWare USB3 DRD Controller Core file
   3  *
   4  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
   5  *
   6  * Authors: Felipe Balbi <balbi@ti.com>,
   7  *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
   8  *
   9  * This program is free software: you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2  of
  11  * the License as published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 #include <linux/version.h>
  23 #include <linux/module.h>
  24 #include <linux/kernel.h>
  25 #include <linux/slab.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/pm_runtime.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/ioport.h>
  31 #include <linux/io.h>
  32 #include <linux/list.h>
  33 #include <linux/delay.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/of.h>
  36 #include <linux/acpi.h>
  37 #include <linux/pinctrl/consumer.h>
  38
  39 #include <linux/usb/ch9.h>
  40 #include <linux/usb/gadget.h>
  41 #include <linux/usb/of.h>
  42 #include <linux/usb/otg.h>
  43
  44 #include "core.h"
  45 #include "gadget.h"
  46 #include "io.h"
  47
  48 #include "debug.h"
  49
  50 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY  5000 /* ms */
  51
  52 /**
  53  * dwc3_get_dr_mode - Validates and sets dr_mode
  54  * @dwc: pointer to our context structure
  55  */
  56 static int dwc3_get_dr_mode(struct dwc3 *dwc)
  57 {
  58         enum usb_dr_mode mode;
  59         struct device *dev = dwc->dev;
  60         unsigned int hw_mode;
  61
  62         if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
  63                 dwc->dr_mode = USB_DR_MODE_OTG;
  64
  65         mode = dwc->dr_mode;
  66         hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
  67
  68         switch (hw_mode) {
  69         case DWC3_GHWPARAMS0_MODE_GADGET:
  70                 if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) {
  71                         dev_err(dev,
  72                                 "Controller does not support host mode.\n");
  73                         return -EINVAL;
  74                 }
  75                 mode = USB_DR_MODE_PERIPHERAL;
  76                 break;
  77         case DWC3_GHWPARAMS0_MODE_HOST:
  78                 if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
  79                         dev_err(dev,
  80                                 "Controller does not support device mode.\n");
  81                         return -EINVAL;
  82                 }
  83                 mode = USB_DR_MODE_HOST;
  84                 break;
  85         default:
  86                 if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
  87                         mode = USB_DR_MODE_HOST;
  88                 else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
  89                         mode = USB_DR_MODE_PERIPHERAL;
  90         }
  91
  92         if (mode != dwc->dr_mode) {
  93                 dev_warn(dev,
  94                          "Configuration mismatch. dr_mode forced to %s\n",
  95                          mode == USB_DR_MODE_HOST ? "host" : "gadget");
  96
  97                 dwc->dr_mode = mode;
  98         }
  99
 100         return 0;
 101 }
 102
 103 static void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
 104 static int dwc3_event_buffers_setup(struct dwc3 *dwc);
 105
 106 static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 107 {
 108         u32 reg;
 109
 110         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 111         reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
 112         reg |= DWC3_GCTL_PRTCAPDIR(mode);
 113         dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 114 }
 115
 116 static void __dwc3_set_mode(struct work_struct *work)
 117 {
 118         struct dwc3 *dwc = work_to_dwc(work);
 119         unsigned long flags;
 120         int ret;
 121
 122         if (!dwc->desired_dr_role)
 123                 return;
 124
 125         if (dwc->desired_dr_role == dwc->current_dr_role)
 126                 return;
 127
 128         if (dwc->dr_mode != USB_DR_MODE_OTG)
 129                 return;
 130
 131         switch (dwc->current_dr_role) {
 132         case DWC3_GCTL_PRTCAP_HOST:
 133                 dwc3_host_exit(dwc);
 134                 break;
 135         case DWC3_GCTL_PRTCAP_DEVICE:
 136                 dwc3_gadget_exit(dwc);
 137                 dwc3_event_buffers_cleanup(dwc);
 138                 break;
 139         default:
 140                 break;
 141         }
 142
 143         spin_lock_irqsave(&dwc->lock, flags);
 144
 145         dwc3_set_prtcap(dwc, dwc->desired_dr_role);
 146
 147         dwc->current_dr_role = dwc->desired_dr_role;
 148
 149         spin_unlock_irqrestore(&dwc->lock, flags);
 150
 151         switch (dwc->desired_dr_role) {
 152         case DWC3_GCTL_PRTCAP_HOST:
 153                 ret = dwc3_host_init(dwc);
 154                 if (ret)
 155                         dev_err(dwc->dev, "failed to initialize host\n");
 156                 break;
 157         case DWC3_GCTL_PRTCAP_DEVICE:
 158                 dwc3_event_buffers_setup(dwc);
 159                 ret = dwc3_gadget_init(dwc);
 160                 if (ret)
 161                         dev_err(dwc->dev, "failed to initialize peripheral\n");
 162                 break;
 163         default:
 164                 break;
 165         }
 166 }
 167
 168 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 169 {
 170         unsigned long flags;
 171
 172         spin_lock_irqsave(&dwc->lock, flags);
 173         dwc->desired_dr_role = mode;
 174         spin_unlock_irqrestore(&dwc->lock, flags);
 175
 176         queue_work(system_power_efficient_wq, &dwc->drd_work);
 177 }
 178
 179 u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
 180 {
 181         struct dwc3             *dwc = dep->dwc;
 182         u32                     reg;
 183
 184         dwc3_writel(dwc->regs, DWC3_GDBGFIFOSPACE,
 185                         DWC3_GDBGFIFOSPACE_NUM(dep->number) |
 186                         DWC3_GDBGFIFOSPACE_TYPE(type));
 187
 188         reg = dwc3_readl(dwc->regs, DWC3_GDBGFIFOSPACE);
 189
 190         return DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(reg);
 191 }
 192
 193 /**
 194  * dwc3_core_soft_reset - Issues core soft reset and PHY reset
 195  * @dwc: pointer to our context structure
 196  */
 197 static int dwc3_core_soft_reset(struct dwc3 *dwc)
 198 {
 199         u32             reg;
 200         int             retries = 1000;
 201         int             ret;
 202
 203         usb_phy_init(dwc->usb2_phy);
 204         usb_phy_init(dwc->usb3_phy);
 205         ret = phy_init(dwc->usb2_generic_phy);
 206         if (ret < 0)
 207                 return ret;
 208
 209         ret = phy_init(dwc->usb3_generic_phy);
 210         if (ret < 0) {
 211                 phy_exit(dwc->usb2_generic_phy);
 212                 return ret;
 213         }
 214
 215         /*
 216          * We're resetting only the device side because, if we're in host mode,
 217          * XHCI driver will reset the host block. If dwc3 was configured for
 218          * host-only mode, then we can return early.
 219          */
 220         if (dwc->dr_mode == USB_DR_MODE_HOST)
 221                 return 0;
 222
 223         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 224         reg |= DWC3_DCTL_CSFTRST;
 225         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 226
 227         do {
 228                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 229                 if (!(reg & DWC3_DCTL_CSFTRST))
 230                         return 0;
 231
 232                 udelay(1);
 233         } while (--retries);
 234
 235         return -ETIMEDOUT;
 236 }
 237
 238 /*
 239  * dwc3_frame_length_adjustment - Adjusts frame length if required
 240  * @dwc3: Pointer to our controller context structure
 241  */
 242 static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
 243 {
 244         u32 reg;
 245         u32 dft;
 246
 247         if (dwc->revision < DWC3_REVISION_250A)
 248                 return;
 249
 250         if (dwc->fladj == 0)
 251                 return;
 252
 253         reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
 254         dft = reg & DWC3_GFLADJ_30MHZ_MASK;
 255         if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
 256             "request value same as default, ignoring\n")) {
 257                 reg &= ~DWC3_GFLADJ_30MHZ_MASK;
 258                 reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
 259                 dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
 260         }
 261 }
 262
 263 /**
 264  * dwc3_free_one_event_buffer - Frees one event buffer
 265  * @dwc: Pointer to our controller context structure
 266  * @evt: Pointer to event buffer to be freed
 267  */
 268 static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
 269                 struct dwc3_event_buffer *evt)
 270 {
 271         dma_free_coherent(dwc->sysdev, evt->length, evt->buf, evt->dma);
 272 }
 273
 274 /**
 275  * dwc3_alloc_one_event_buffer - Allocates one event buffer structure
 276  * @dwc: Pointer to our controller context structure
 277  * @length: size of the event buffer
 278  *
 279  * Returns a pointer to the allocated event buffer structure on success
 280  * otherwise ERR_PTR(errno).
 281  */
 282 static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
 283                 unsigned length)
 284 {
 285         struct dwc3_event_buffer        *evt;
 286
 287         evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL);
 288         if (!evt)
 289                 return ERR_PTR(-ENOMEM);
 290
 291         evt->dwc        = dwc;
 292         evt->length     = length;
 293         evt->cache      = devm_kzalloc(dwc->dev, length, GFP_KERNEL);
 294         if (!evt->cache)
 295                 return ERR_PTR(-ENOMEM);
 296
 297         evt->buf        = dma_alloc_coherent(dwc->sysdev, length,
 298                         &evt->dma, GFP_KERNEL);
 299         if (!evt->buf)
 300                 return ERR_PTR(-ENOMEM);
 301
 302         return evt;
 303 }
 304
 305 /**
 306  * dwc3_free_event_buffers - frees all allocated event buffers
 307  * @dwc: Pointer to our controller context structure
 308  */
 309 static void dwc3_free_event_buffers(struct dwc3 *dwc)
 310 {
 311         struct dwc3_event_buffer        *evt;
 312
 313         evt = dwc->ev_buf;
 314         if (evt)
 315                 dwc3_free_one_event_buffer(dwc, evt);
 316 }
 317
 318 /**
 319  * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
 320  * @dwc: pointer to our controller context structure
 321  * @length: size of event buffer
 322  *
 323  * Returns 0 on success otherwise negative errno. In the error case, dwc
 324  * may contain some buffers allocated but not all which were requested.
 325  */
 326 static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 327 {
 328         struct dwc3_event_buffer *evt;
 329
 330         evt = dwc3_alloc_one_event_buffer(dwc, length);
 331         if (IS_ERR(evt)) {
 332                 dev_err(dwc->dev, "can't allocate event buffer\n");
 333                 return PTR_ERR(evt);
 334         }
 335         dwc->ev_buf = evt;
 336
 337         return 0;
 338 }
 339
 340 /**
 341  * dwc3_event_buffers_setup - setup our allocated event buffers
 342  * @dwc: pointer to our controller context structure
 343  *
 344  * Returns 0 on success otherwise negative errno.
 345  */
 346 static int dwc3_event_buffers_setup(struct dwc3 *dwc)
 347 {
 348         struct dwc3_event_buffer        *evt;
 349
 350         evt = dwc->ev_buf;
 351         evt->lpos = 0;
 352         dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
 353                         lower_32_bits(evt->dma));
 354         dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
 355                         upper_32_bits(evt->dma));
 356         dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
 357                         DWC3_GEVNTSIZ_SIZE(evt->length));
 358         dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
 359
 360         return 0;
 361 }
 362
 363 static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 364 {
 365         struct dwc3_event_buffer        *evt;
 366
 367         evt = dwc->ev_buf;
 368
 369         evt->lpos = 0;
 370
 371         dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), 0);
 372         dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
 373         dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
 374                         | DWC3_GEVNTSIZ_SIZE(0));
 375         dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
 376 }
 377
 378 static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
 379 {
 380         if (!dwc->has_hibernation)
 381                 return 0;
 382
 383         if (!dwc->nr_scratch)
 384                 return 0;
 385
 386         dwc->scratchbuf = kmalloc_array(dwc->nr_scratch,
 387                         DWC3_SCRATCHBUF_SIZE, GFP_KERNEL);
 388         if (!dwc->scratchbuf)
 389                 return -ENOMEM;
 390
 391         return 0;
 392 }
 393
 394 static int dwc3_setup_scratch_buffers(struct dwc3 *dwc)
 395 {
 396         dma_addr_t scratch_addr;
 397         u32 param;
 398         int ret;
 399
 400         if (!dwc->has_hibernation)
 401                 return 0;
 402
 403         if (!dwc->nr_scratch)
 404                 return 0;
 405
 406          /* should never fall here */
 407         if (!WARN_ON(dwc->scratchbuf))
 408                 return 0;
 409
 410         scratch_addr = dma_map_single(dwc->sysdev, dwc->scratchbuf,
 411                         dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE,
 412                         DMA_BIDIRECTIONAL);
 413         if (dma_mapping_error(dwc->sysdev, scratch_addr)) {
 414                 dev_err(dwc->sysdev, "failed to map scratch buffer\n");
 415                 ret = -EFAULT;
 416                 goto err0;
 417         }
 418
 419         dwc->scratch_addr = scratch_addr;
 420
 421         param = lower_32_bits(scratch_addr);
 422
 423         ret = dwc3_send_gadget_generic_command(dwc,
 424                         DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param);
 425         if (ret < 0)
 426                 goto err1;
 427
 428         param = upper_32_bits(scratch_addr);
 429
 430         ret = dwc3_send_gadget_generic_command(dwc,
 431                         DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param);
 432         if (ret < 0)
 433                 goto err1;
 434
 435         return 0;
 436
 437 err1:
 438         dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch *
 439                         DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
 440
 441 err0:
 442         return ret;
 443 }
 444
 445 static void dwc3_free_scratch_buffers(struct dwc3 *dwc)
 446 {
 447         if (!dwc->has_hibernation)
 448                 return;
 449
 450         if (!dwc->nr_scratch)
 451                 return;
 452
 453          /* should never fall here */
 454         if (!WARN_ON(dwc->scratchbuf))
 455                 return;
 456
 457         dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch *
 458                         DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
 459         kfree(dwc->scratchbuf);
 460 }
 461
 462 static void dwc3_core_num_eps(struct dwc3 *dwc)
 463 {
 464         struct dwc3_hwparams    *parms = &dwc->hwparams;
 465
 466         dwc->num_eps = DWC3_NUM_EPS(parms);
 467 }
 468
 469 static void dwc3_cache_hwparams(struct dwc3 *dwc)
 470 {
 471         struct dwc3_hwparams    *parms = &dwc->hwparams;
 472
 473         parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0);
 474         parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1);
 475         parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2);
 476         parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3);
 477         parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4);
 478         parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5);
 479         parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6);
 480         parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7);
 481         parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8);
 482 }
 483
 484 /**
 485  * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
 486  * @dwc: Pointer to our controller context structure
 487  *
 488  * Returns 0 on success. The USB PHY interfaces are configured but not
 489  * initialized. The PHY interfaces and the PHYs get initialized together with
 490  * the core in dwc3_core_init.
 491  */
 492 static int dwc3_phy_setup(struct dwc3 *dwc)
 493 {
 494         u32 reg;
 495         int ret;
 496
 497         reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 498
 499         /*
 500          * Make sure UX_EXIT_PX is cleared as that causes issues with some
 501          * PHYs. Also, this bit is not supposed to be used in normal operation.
 502          */
 503         reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
 504
 505         /*
 506          * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
 507          * to '0' during coreConsultant configuration. So default value
 508          * will be '0' when the core is reset. Application needs to set it
 509          * to '1' after the core initialization is completed.
 510          */
 511         if (dwc->revision > DWC3_REVISION_194A)
 512                 reg |= DWC3_GUSB3PIPECTL_SUSPHY;
 513
 514         if (dwc->u2ss_inp3_quirk)
 515                 reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
 516
 517         if (dwc->dis_rxdet_inp3_quirk)
 518                 reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3;
 519
 520         if (dwc->req_p1p2p3_quirk)
 521                 reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;
 522
 523         if (dwc->del_p1p2p3_quirk)
 524                 reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN;
 525
 526         if (dwc->del_phy_power_chg_quirk)
 527                 reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE;
 528
 529         if (dwc->lfps_filter_quirk)
 530                 reg |= DWC3_GUSB3PIPECTL_LFPSFILT;
 531
 532         if (dwc->rx_detect_poll_quirk)
 533                 reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
 534
 535         if (dwc->tx_de_emphasis_quirk)
 536                 reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
 537
 538         if (dwc->dis_u3_susphy_quirk)
 539                 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
 540
 541         if (dwc->dis_del_phy_power_chg_quirk)
 542                 reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
 543
 544         dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 545
 546         reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 547
 548         /* Select the HS PHY interface */
 549         switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
 550         case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
 551                 if (dwc->hsphy_interface &&
 552                                 !strncmp(dwc->hsphy_interface, "utmi", 4)) {
 553                         reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
 554                         break;
 555                 } else if (dwc->hsphy_interface &&
 556                                 !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
 557                         reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
 558                         dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 559                 } else {
 560                         /* Relying on default value. */
 561                         if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
 562                                 break;
 563                 }
 564                 /* FALLTHROUGH */
 565         case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
 566                 ret = dwc3_ulpi_init(dwc);
 567                 if (ret)
 568                         return ret;
 569                 /* FALLTHROUGH */
 570         default:
 571                 break;
 572         }
 573
 574         switch (dwc->hsphy_mode) {
 575         case USBPHY_INTERFACE_MODE_UTMI:
 576                 reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
 577                        DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
 578                 reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
 579                        DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
 580                 break;
 581         case USBPHY_INTERFACE_MODE_UTMIW:
 582                 reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
 583                        DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
 584                 reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
 585                        DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
 586                 break;
 587         default:
 588                 break;
 589         }
 590
 591         /*
 592          * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
 593          * '0' during coreConsultant configuration. So default value will
 594          * be '0' when the core is reset. Application needs to set it to
 595          * '1' after the core initialization is completed.
 596          */
 597         if (dwc->revision > DWC3_REVISION_194A)
 598                 reg |= DWC3_GUSB2PHYCFG_SUSPHY;
 599
 600         if (dwc->dis_u2_susphy_quirk)
 601                 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 602
 603         if (dwc->dis_enblslpm_quirk)
 604                 reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
 605
 606         if (dwc->dis_u2_freeclk_exists_quirk)
 607                 reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
 608
 609         dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 610
 611         return 0;
 612 }
 613
 614 static void dwc3_core_exit(struct dwc3 *dwc)
 615 {
 616         dwc3_event_buffers_cleanup(dwc);
 617
 618         usb_phy_shutdown(dwc->usb2_phy);
 619         usb_phy_shutdown(dwc->usb3_phy);
 620         phy_exit(dwc->usb2_generic_phy);
 621         phy_exit(dwc->usb3_generic_phy);
 622
 623         usb_phy_set_suspend(dwc->usb2_phy, 1);
 624         usb_phy_set_suspend(dwc->usb3_phy, 1);
 625         phy_power_off(dwc->usb2_generic_phy);
 626         phy_power_off(dwc->usb3_generic_phy);
 627 }
 628
 629 static bool dwc3_core_is_valid(struct dwc3 *dwc)
 630 {
 631         u32 reg;
 632
 633         reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
 634
 635         /* This should read as U3 followed by revision number */
 636         if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) {
 637                 /* Detected DWC_usb3 IP */
 638                 dwc->revision = reg;
 639         } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) {
 640                 /* Detected DWC_usb31 IP */
 641                 dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
 642                 dwc->revision |= DWC3_REVISION_IS_DWC31;
 643         } else {
 644                 return false;
 645         }
 646
 647         return true;
 648 }
 649
 650 static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 651 {
 652         u32 hwparams4 = dwc->hwparams.hwparams4;
 653         u32 reg;
 654
 655         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 656         reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
 657
 658         switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
 659         case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
 660                 /**
 661                  * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
 662                  * issue which would cause xHCI compliance tests to fail.
 663                  *
 664                  * Because of that we cannot enable clock gating on such
 665                  * configurations.
 666                  *
 667                  * Refers to:
 668                  *
 669                  * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based
 670                  * SOF/ITP Mode Used
 671                  */
 672                 if ((dwc->dr_mode == USB_DR_MODE_HOST ||
 673                                 dwc->dr_mode == USB_DR_MODE_OTG) &&
 674                                 (dwc->revision >= DWC3_REVISION_210A &&
 675                                 dwc->revision <= DWC3_REVISION_250A))
 676                         reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC;
 677                 else
 678                         reg &= ~DWC3_GCTL_DSBLCLKGTNG;
 679                 break;
 680         case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
 681                 /* enable hibernation here */
 682                 dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
 683
 684                 /*
 685                  * REVISIT Enabling this bit so that host-mode hibernation
 686                  * will work. Device-mode hibernation is not yet implemented.
 687                  */
 688                 reg |= DWC3_GCTL_GBLHIBERNATIONEN;
 689                 break;
 690         default:
 691                 /* nothing */
 692                 break;
 693         }
 694
 695         /* check if current dwc3 is on simulation board */
 696         if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
 697                 dev_info(dwc->dev, "Running with FPGA optmizations\n");
 698                 dwc->is_fpga = true;
 699         }
 700
 701         WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga,
 702                         "disable_scramble cannot be used on non-FPGA builds\n");
 703
 704         if (dwc->disable_scramble_quirk && dwc->is_fpga)
 705                 reg |= DWC3_GCTL_DISSCRAMBLE;
 706         else
 707                 reg &= ~DWC3_GCTL_DISSCRAMBLE;
 708
 709         if (dwc->u2exit_lfps_quirk)
 710                 reg |= DWC3_GCTL_U2EXIT_LFPS;
 711
 712         /*
 713          * WORKAROUND: DWC3 revisions <1.90a have a bug
 714          * where the device can fail to connect at SuperSpeed
 715          * and falls back to high-speed mode which causes
 716          * the device to enter a Connect/Disconnect loop
 717          */
 718         if (dwc->revision < DWC3_REVISION_190A)
 719                 reg |= DWC3_GCTL_U2RSTECN;
 720
 721         dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 722 }
 723
 724 /**
 725  * dwc3_core_init - Low-level initialization of DWC3 Core
 726  * @dwc: Pointer to our controller context structure
 727  *
 728  * Returns 0 on success otherwise negative errno.
 729  */
 730 static int dwc3_core_init(struct dwc3 *dwc)
 731 {
 732         u32                     reg;
 733         int                     ret;
 734
 735         if (!dwc3_core_is_valid(dwc)) {
 736                 dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
 737                 ret = -ENODEV;
 738                 goto err0;
 739         }
 740
 741         /*
 742          * Write Linux Version Code to our GUID register so it's easy to figure
 743          * out which kernel version a bug was found.
 744          */
 745         dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
 746
 747         /* Handle USB2.0-only core configuration */
 748         if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
 749                         DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
 750                 if (dwc->maximum_speed == USB_SPEED_SUPER)
 751                         dwc->maximum_speed = USB_SPEED_HIGH;
 752         }
 753
 754         ret = dwc3_core_soft_reset(dwc);
 755         if (ret)
 756                 goto err0;
 757
 758         ret = dwc3_phy_setup(dwc);
 759         if (ret)
 760                 goto err0;
 761
 762         dwc3_core_setup_global_control(dwc);
 763         dwc3_core_num_eps(dwc);
 764
 765         ret = dwc3_setup_scratch_buffers(dwc);
 766         if (ret)
 767                 goto err1;
 768
 769         /* Adjust Frame Length */
 770         dwc3_frame_length_adjustment(dwc);
 771
 772         usb_phy_set_suspend(dwc->usb2_phy, 0);
 773         usb_phy_set_suspend(dwc->usb3_phy, 0);
 774         ret = phy_power_on(dwc->usb2_generic_phy);
 775         if (ret < 0)
 776                 goto err2;
 777
 778         ret = phy_power_on(dwc->usb3_generic_phy);
 779         if (ret < 0)
 780                 goto err3;
 781
 782         ret = dwc3_event_buffers_setup(dwc);
 783         if (ret) {
 784                 dev_err(dwc->dev, "failed to setup event buffers\n");
 785                 goto err4;
 786         }
 787
 788         /*
 789          * ENDXFER polling is available on version 3.10a and later of
 790          * the DWC_usb3 controller. It is NOT available in the
 791          * DWC_usb31 controller.
 792          */
 793         if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) {
 794                 reg = dwc3_readl(dwc->regs, DWC3_GUCTL2);
 795                 reg |= DWC3_GUCTL2_RST_ACTBITLATER;
 796                 dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
 797         }
 798
 799         /*
 800          * Enable hardware control of sending remote wakeup in HS when
 801          * the device is in the L1 state.
 802          */
 803         if (dwc->revision >= DWC3_REVISION_290A) {
 804                 reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
 805                 reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
 806                 dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 807         }
 808
 809         return 0;
 810
 811 err4:
 812         phy_power_off(dwc->usb3_generic_phy);
 813
 814 err3:
 815         phy_power_off(dwc->usb2_generic_phy);
 816
 817 err2:
 818         usb_phy_set_suspend(dwc->usb2_phy, 1);
 819         usb_phy_set_suspend(dwc->usb3_phy, 1);
 820
 821 err1:
 822         usb_phy_shutdown(dwc->usb2_phy);
 823         usb_phy_shutdown(dwc->usb3_phy);
 824         phy_exit(dwc->usb2_generic_phy);
 825         phy_exit(dwc->usb3_generic_phy);
 826
 827 err0:
 828         return ret;
 829 }
 830
 831 static int dwc3_core_get_phy(struct dwc3 *dwc)
 832 {
 833         struct device           *dev = dwc->dev;
 834         struct device_node      *node = dev->of_node;
 835         int ret;
 836
 837         if (node) {
 838                 dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
 839                 dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
 840         } else {
 841                 dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 842                 dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
 843         }
 844
 845         if (IS_ERR(dwc->usb2_phy)) {
 846                 ret = PTR_ERR(dwc->usb2_phy);
 847                 if (ret == -ENXIO || ret == -ENODEV) {
 848                         dwc->usb2_phy = NULL;
 849                 } else if (ret == -EPROBE_DEFER) {
 850                         return ret;
 851                 } else {
 852                         dev_err(dev, "no usb2 phy configured\n");
 853                         return ret;
 854                 }
 855         }
 856
 857         if (IS_ERR(dwc->usb3_phy)) {
 858                 ret = PTR_ERR(dwc->usb3_phy);
 859                 if (ret == -ENXIO || ret == -ENODEV) {
 860                         dwc->usb3_phy = NULL;
 861                 } else if (ret == -EPROBE_DEFER) {
 862                         return ret;
 863                 } else {
 864                         dev_err(dev, "no usb3 phy configured\n");
 865                         return ret;
 866                 }
 867         }
 868
 869         dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
 870         if (IS_ERR(dwc->usb2_generic_phy)) {
 871                 ret = PTR_ERR(dwc->usb2_generic_phy);
 872                 if (ret == -ENOSYS || ret == -ENODEV) {
 873                         dwc->usb2_generic_phy = NULL;
 874                 } else if (ret == -EPROBE_DEFER) {
 875                         return ret;
 876                 } else {
 877                         dev_err(dev, "no usb2 phy configured\n");
 878                         return ret;
 879                 }
 880         }
 881
 882         dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
 883         if (IS_ERR(dwc->usb3_generic_phy)) {
 884                 ret = PTR_ERR(dwc->usb3_generic_phy);
 885                 if (ret == -ENOSYS || ret == -ENODEV) {
 886                         dwc->usb3_generic_phy = NULL;
 887                 } else if (ret == -EPROBE_DEFER) {
 888                         return ret;
 889                 } else {
 890                         dev_err(dev, "no usb3 phy configured\n");
 891                         return ret;
 892                 }
 893         }
 894
 895         return 0;
 896 }
 897
 898 static int dwc3_core_init_mode(struct dwc3 *dwc)
 899 {
 900         struct device *dev = dwc->dev;
 901         int ret;
 902
 903         switch (dwc->dr_mode) {
 904         case USB_DR_MODE_PERIPHERAL:
 905                 dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 906                 ret = dwc3_gadget_init(dwc);
 907                 if (ret) {
 908                         if (ret != -EPROBE_DEFER)
 909                                 dev_err(dev, "failed to initialize gadget\n");
 910                         return ret;
 911                 }
 912                 break;
 913         case USB_DR_MODE_HOST:
 914                 dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 915                 ret = dwc3_host_init(dwc);
 916                 if (ret) {
 917                         if (ret != -EPROBE_DEFER)
 918                                 dev_err(dev, "failed to initialize host\n");
 919                         return ret;
 920                 }
 921                 break;
 922         case USB_DR_MODE_OTG:
 923                 INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
 924                 ret = dwc3_drd_init(dwc);
 925                 if (ret) {
 926                         if (ret != -EPROBE_DEFER)
 927                                 dev_err(dev, "failed to initialize dual-role\n");
 928                         return ret;
 929                 }
 930                 break;
 931         default:
 932                 dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode);
 933                 return -EINVAL;
 934         }
 935
 936         return 0;
 937 }
 938
 939 static void dwc3_core_exit_mode(struct dwc3 *dwc)
 940 {
 941         switch (dwc->dr_mode) {
 942         case USB_DR_MODE_PERIPHERAL:
 943                 dwc3_gadget_exit(dwc);
 944                 break;
 945         case USB_DR_MODE_HOST:
 946                 dwc3_host_exit(dwc);
 947                 break;
 948         case USB_DR_MODE_OTG:
 949                 dwc3_drd_exit(dwc);
 950                 break;
 951         default:
 952                 /* do nothing */
 953                 break;
 954         }
 955 }
 956
 957 static void dwc3_get_properties(struct dwc3 *dwc)
 958 {
 959         struct device           *dev = dwc->dev;
 960         u8                      lpm_nyet_threshold;
 961         u8                      tx_de_emphasis;
 962         u8                      hird_threshold;
 963
 964         /* default to highest possible threshold */
 965         lpm_nyet_threshold = 0xff;
 966
 967         /* default to -3.5dB de-emphasis */
 968         tx_de_emphasis = 1;
 969
 970         /*
 971          * default to assert utmi_sleep_n and use maximum allowed HIRD
 972          * threshold value of 0b1100
 973          */
 974         hird_threshold = 12;
 975
 976         dwc->maximum_speed = usb_get_maximum_speed(dev);
 977         dwc->dr_mode = usb_get_dr_mode(dev);
 978         dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
 979
 980         dwc->sysdev_is_parent = device_property_read_bool(dev,
 981                                 "linux,sysdev_is_parent");
 982         if (dwc->sysdev_is_parent)
 983                 dwc->sysdev = dwc->dev->parent;
 984         else
 985                 dwc->sysdev = dwc->dev;
 986
 987         dwc->has_lpm_erratum = device_property_read_bool(dev,
 988                                 "snps,has-lpm-erratum");
 989         device_property_read_u8(dev, "snps,lpm-nyet-threshold",
 990                                 &lpm_nyet_threshold);
 991         dwc->is_utmi_l1_suspend = device_property_read_bool(dev,
 992                                 "snps,is-utmi-l1-suspend");
 993         device_property_read_u8(dev, "snps,hird-threshold",
 994                                 &hird_threshold);
 995         dwc->usb3_lpm_capable = device_property_read_bool(dev,
 996                                 "snps,usb3_lpm_capable");
 997
 998         dwc->disable_scramble_quirk = device_property_read_bool(dev,
 999                                 "snps,disable_scramble_quirk");
1000         dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
1001                                 "snps,u2exit_lfps_quirk");
1002         dwc->u2ss_inp3_quirk = device_property_read_bool(dev,
1003                                 "snps,u2ss_inp3_quirk");
1004         dwc->req_p1p2p3_quirk = device_property_read_bool(dev,
1005                                 "snps,req_p1p2p3_quirk");
1006         dwc->del_p1p2p3_quirk = device_property_read_bool(dev,
1007                                 "snps,del_p1p2p3_quirk");
1008         dwc->del_phy_power_chg_quirk = device_property_read_bool(dev,
1009                                 "snps,del_phy_power_chg_quirk");
1010         dwc->lfps_filter_quirk = device_property_read_bool(dev,
1011                                 "snps,lfps_filter_quirk");
1012         dwc->rx_detect_poll_quirk = device_property_read_bool(dev,
1013                                 "snps,rx_detect_poll_quirk");
1014         dwc->dis_u3_susphy_quirk = device_property_read_bool(dev,
1015                                 "snps,dis_u3_susphy_quirk");
1016         dwc->dis_u2_susphy_quirk = device_property_read_bool(dev,
1017                                 "snps,dis_u2_susphy_quirk");
1018         dwc->dis_enblslpm_quirk = device_property_read_bool(dev,
1019                                 "snps,dis_enblslpm_quirk");
1020         dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
1021                                 "snps,dis_rxdet_inp3_quirk");
1022         dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
1023                                 "snps,dis-u2-freeclk-exists-quirk");
1024         dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
1025                                 "snps,dis-del-phy-power-chg-quirk");
1026
1027         dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
1028                                 "snps,tx_de_emphasis_quirk");
1029         device_property_read_u8(dev, "snps,tx_de_emphasis",
1030                                 &tx_de_emphasis);
1031         device_property_read_string(dev, "snps,hsphy_interface",
1032                                     &dwc->hsphy_interface);
1033         device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
1034                                  &dwc->fladj);
1035
1036         dwc->lpm_nyet_threshold = lpm_nyet_threshold;
1037         dwc->tx_de_emphasis = tx_de_emphasis;
1038
1039         dwc->hird_threshold = hird_threshold
1040                 | (dwc->is_utmi_l1_suspend << 4);
1041
1042         dwc->imod_interval = 0;
1043 }
1044
1045 /* check whether the core supports IMOD */
1046 bool dwc3_has_imod(struct dwc3 *dwc)
1047 {
1048         return ((dwc3_is_usb3(dwc) &&
1049                  dwc->revision >= DWC3_REVISION_300A) ||
1050                 (dwc3_is_usb31(dwc) &&
1051                  dwc->revision >= DWC3_USB31_REVISION_120A));
1052 }
1053
1054 static void dwc3_check_params(struct dwc3 *dwc)
1055 {
1056         struct device *dev = dwc->dev;
1057
1058         /* Check for proper value of imod_interval */
1059         if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
1060                 dev_warn(dwc->dev, "Interrupt moderation not supported\n");
1061                 dwc->imod_interval = 0;
1062         }
1063
1064         /*
1065          * Workaround for STAR 9000961433 which affects only version
1066          * 3.00a of the DWC_usb3 core. This prevents the controller
1067          * interrupt from being masked while handling events. IMOD
1068          * allows us to work around this issue. Enable it for the
1069          * affected version.
1070          */
1071         if (!dwc->imod_interval &&
1072             (dwc->revision == DWC3_REVISION_300A))
1073                 dwc->imod_interval = 1;
1074
1075         /* Check the maximum_speed parameter */
1076         switch (dwc->maximum_speed) {
1077         case USB_SPEED_LOW:
1078         case USB_SPEED_FULL:
1079         case USB_SPEED_HIGH:
1080         case USB_SPEED_SUPER:
1081         case USB_SPEED_SUPER_PLUS:
1082                 break;
1083         default:
1084                 dev_err(dev, "invalid maximum_speed parameter %d\n",
1085                         dwc->maximum_speed);
1086                 /* fall through */
1087         case USB_SPEED_UNKNOWN:
1088                 /* default to superspeed */
1089                 dwc->maximum_speed = USB_SPEED_SUPER;
1090
1091                 /*
1092                  * default to superspeed plus if we are capable.
1093                  */
1094                 if (dwc3_is_usb31(dwc) &&
1095                     (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
1096                      DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
1097                         dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
1098
1099                 break;
1100         }
1101 }
1102
1103 static int dwc3_probe(struct platform_device *pdev)
1104 {
1105         struct device           *dev = &pdev->dev;
1106         struct resource         *res;
1107         struct dwc3             *dwc;
1108
1109         int                     ret;
1110
1111         void __iomem            *regs;
1112
1113         dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
1114         if (!dwc)
1115                 return -ENOMEM;
1116
1117         dwc->dev = dev;
1118
1119         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1120         if (!res) {
1121                 dev_err(dev, "missing memory resource\n");
1122                 return -ENODEV;
1123         }
1124
1125         dwc->xhci_resources[0].start = res->start;
1126         dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
1127                                         DWC3_XHCI_REGS_END;
1128         dwc->xhci_resources[0].flags = res->flags;
1129         dwc->xhci_resources[0].name = res->name;
1130
1131         res->start += DWC3_GLOBALS_REGS_START;
1132
1133         /*
1134          * Request memory region but exclude xHCI regs,
1135          * since it will be requested by the xhci-plat driver.
1136          */
1137         regs = devm_ioremap_resource(dev, res);
1138         if (IS_ERR(regs)) {
1139                 ret = PTR_ERR(regs);
1140                 goto err0;
1141         }
1142
1143         dwc->regs       = regs;
1144         dwc->regs_size  = resource_size(res);
1145
1146         dwc3_get_properties(dwc);
1147
1148         platform_set_drvdata(pdev, dwc);
1149         dwc3_cache_hwparams(dwc);
1150
1151         ret = dwc3_core_get_phy(dwc);
1152         if (ret)
1153                 goto err0;
1154
1155         spin_lock_init(&dwc->lock);
1156
1157         pm_runtime_set_active(dev);
1158         pm_runtime_use_autosuspend(dev);
1159         pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
1160         pm_runtime_enable(dev);
1161         ret = pm_runtime_get_sync(dev);
1162         if (ret < 0)
1163                 goto err1;
1164
1165         pm_runtime_forbid(dev);
1166
1167         ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
1168         if (ret) {
1169                 dev_err(dwc->dev, "failed to allocate event buffers\n");
1170                 ret = -ENOMEM;
1171                 goto err2;
1172         }
1173
1174         ret = dwc3_get_dr_mode(dwc);
1175         if (ret)
1176                 goto err3;
1177
1178         ret = dwc3_alloc_scratch_buffers(dwc);
1179         if (ret)
1180                 goto err3;
1181
1182         ret = dwc3_core_init(dwc);
1183         if (ret) {
1184                 dev_err(dev, "failed to initialize core\n");
1185                 goto err4;
1186         }
1187
1188         dwc3_check_params(dwc);
1189
1190         ret = dwc3_core_init_mode(dwc);
1191         if (ret)
1192                 goto err5;
1193
1194         dwc3_debugfs_init(dwc);
1195         pm_runtime_put(dev);
1196
1197         return 0;
1198
1199 err5:
1200         dwc3_event_buffers_cleanup(dwc);
1201
1202 err4:
1203         dwc3_free_scratch_buffers(dwc);
1204
1205 err3:
1206         dwc3_free_event_buffers(dwc);
1207         dwc3_ulpi_exit(dwc);
1208
1209 err2:
1210         pm_runtime_allow(&pdev->dev);
1211
1212 err1:
1213         pm_runtime_put_sync(&pdev->dev);
1214         pm_runtime_disable(&pdev->dev);
1215
1216 err0:
1217         /*
1218          * restore res->start back to its original value so that, in case the
1219          * probe is deferred, we don't end up getting error in request the
1220          * memory region the next time probe is called.
1221          */
1222         res->start -= DWC3_GLOBALS_REGS_START;
1223
1224         return ret;
1225 }
1226
1227 static int dwc3_remove(struct platform_device *pdev)
1228 {
1229         struct dwc3     *dwc = platform_get_drvdata(pdev);
1230         struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1231
1232         pm_runtime_get_sync(&pdev->dev);
1233         /*
1234          * restore res->start back to its original value so that, in case the
1235          * probe is deferred, we don't end up getting error in request the
1236          * memory region the next time probe is called.
1237          */
1238         res->start -= DWC3_GLOBALS_REGS_START;
1239
1240         dwc3_debugfs_exit(dwc);
1241         dwc3_core_exit_mode(dwc);
1242
1243         dwc3_core_exit(dwc);
1244         dwc3_ulpi_exit(dwc);
1245
1246         pm_runtime_put_sync(&pdev->dev);
1247         pm_runtime_allow(&pdev->dev);
1248         pm_runtime_disable(&pdev->dev);
1249
1250         dwc3_free_event_buffers(dwc);
1251         dwc3_free_scratch_buffers(dwc);
1252
1253         return 0;
1254 }
1255
1256 #ifdef CONFIG_PM
1257 static int dwc3_suspend_common(struct dwc3 *dwc)
1258 {
1259         unsigned long   flags;
1260
1261         switch (dwc->dr_mode) {
1262         case USB_DR_MODE_PERIPHERAL:
1263         case USB_DR_MODE_OTG:
1264                 spin_lock_irqsave(&dwc->lock, flags);
1265                 dwc3_gadget_suspend(dwc);
1266                 spin_unlock_irqrestore(&dwc->lock, flags);
1267                 break;
1268         case USB_DR_MODE_HOST:
1269         default:
1270                 /* do nothing */
1271                 break;
1272         }
1273
1274         dwc3_core_exit(dwc);
1275
1276         return 0;
1277 }
1278
1279 static int dwc3_resume_common(struct dwc3 *dwc)
1280 {
1281         unsigned long   flags;
1282         int             ret;
1283
1284         ret = dwc3_core_init(dwc);
1285         if (ret)
1286                 return ret;
1287
1288         switch (dwc->dr_mode) {
1289         case USB_DR_MODE_PERIPHERAL:
1290         case USB_DR_MODE_OTG:
1291                 spin_lock_irqsave(&dwc->lock, flags);
1292                 dwc3_gadget_resume(dwc);
1293                 spin_unlock_irqrestore(&dwc->lock, flags);
1294                 /* FALLTHROUGH */
1295         case USB_DR_MODE_HOST:
1296         default:
1297                 /* do nothing */
1298                 break;
1299         }
1300
1301         return 0;
1302 }
1303
1304 static int dwc3_runtime_checks(struct dwc3 *dwc)
1305 {
1306         switch (dwc->dr_mode) {
1307         case USB_DR_MODE_PERIPHERAL:
1308         case USB_DR_MODE_OTG:
1309                 if (dwc->connected)
1310                         return -EBUSY;
1311                 break;
1312         case USB_DR_MODE_HOST:
1313         default:
1314                 /* do nothing */
1315                 break;
1316         }
1317
1318         return 0;
1319 }
1320
1321 static int dwc3_runtime_suspend(struct device *dev)
1322 {
1323         struct dwc3     *dwc = dev_get_drvdata(dev);
1324         int             ret;
1325
1326         if (dwc3_runtime_checks(dwc))
1327                 return -EBUSY;
1328
1329         ret = dwc3_suspend_common(dwc);
1330         if (ret)
1331                 return ret;
1332
1333         device_init_wakeup(dev, true);
1334
1335         return 0;
1336 }
1337
1338 static int dwc3_runtime_resume(struct device *dev)
1339 {
1340         struct dwc3     *dwc = dev_get_drvdata(dev);
1341         int             ret;
1342
1343         device_init_wakeup(dev, false);
1344
1345         ret = dwc3_resume_common(dwc);
1346         if (ret)
1347                 return ret;
1348
1349         switch (dwc->dr_mode) {
1350         case USB_DR_MODE_PERIPHERAL:
1351         case USB_DR_MODE_OTG:
1352                 dwc3_gadget_process_pending_events(dwc);
1353                 break;
1354         case USB_DR_MODE_HOST:
1355         default:
1356                 /* do nothing */
1357                 break;
1358         }
1359
1360         pm_runtime_mark_last_busy(dev);
1361         pm_runtime_put(dev);
1362
1363         return 0;
1364 }
1365
1366 static int dwc3_runtime_idle(struct device *dev)
1367 {
1368         struct dwc3     *dwc = dev_get_drvdata(dev);
1369
1370         switch (dwc->dr_mode) {
1371         case USB_DR_MODE_PERIPHERAL:
1372         case USB_DR_MODE_OTG:
1373                 if (dwc3_runtime_checks(dwc))
1374                         return -EBUSY;
1375                 break;
1376         case USB_DR_MODE_HOST:
1377         default:
1378                 /* do nothing */
1379                 break;
1380         }
1381
1382         pm_runtime_mark_last_busy(dev);
1383         pm_runtime_autosuspend(dev);
1384
1385         return 0;
1386 }
1387 #endif /* CONFIG_PM */
1388
1389 #ifdef CONFIG_PM_SLEEP
1390 static int dwc3_suspend(struct device *dev)
1391 {
1392         struct dwc3     *dwc = dev_get_drvdata(dev);
1393         int             ret;
1394
1395         ret = dwc3_suspend_common(dwc);
1396         if (ret)
1397                 return ret;
1398
1399         pinctrl_pm_select_sleep_state(dev);
1400
1401         return 0;
1402 }
1403
1404 static int dwc3_resume(struct device *dev)
1405 {
1406         struct dwc3     *dwc = dev_get_drvdata(dev);
1407         int             ret;
1408
1409         pinctrl_pm_select_default_state(dev);
1410
1411         ret = dwc3_resume_common(dwc);
1412         if (ret)
1413                 return ret;
1414
1415         pm_runtime_disable(dev);
1416         pm_runtime_set_active(dev);
1417         pm_runtime_enable(dev);
1418
1419         return 0;
1420 }
1421 #endif /* CONFIG_PM_SLEEP */
1422
1423 static const struct dev_pm_ops dwc3_dev_pm_ops = {
1424         SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
1425         SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
1426                         dwc3_runtime_idle)
1427 };
1428
1429 #ifdef CONFIG_OF
1430 static const struct of_device_id of_dwc3_match[] = {
1431         {
1432                 .compatible = "snps,dwc3"
1433         },
1434         {
1435                 .compatible = "synopsys,dwc3"
1436         },
1437         { },
1438 };
1439 MODULE_DEVICE_TABLE(of, of_dwc3_match);
1440 #endif
1441
1442 #ifdef CONFIG_ACPI
1443
1444 #define ACPI_ID_INTEL_BSW       "808622B7"
1445
1446 static const struct acpi_device_id dwc3_acpi_match[] = {
1447         { ACPI_ID_INTEL_BSW, 0 },
1448         { },
1449 };
1450 MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
1451 #endif
1452
1453 static struct platform_driver dwc3_driver = {
1454         .probe          = dwc3_probe,
1455         .remove         = dwc3_remove,
1456         .driver         = {
1457                 .name   = "dwc3",
1458                 .of_match_table = of_match_ptr(of_dwc3_match),
1459                 .acpi_match_table = ACPI_PTR(dwc3_acpi_match),
1460                 .pm     = &dwc3_dev_pm_ops,
1461         },
1462 };
1463
1464 module_platform_driver(dwc3_driver);
1465
1466 MODULE_ALIAS("platform:dwc3");
1467 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
1468 MODULE_LICENSE("GPL v2");
1469 MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");