drivers/scsi/sd.c

   1 /*
   2  *      sd.c Copyright (C) 1992 Drew Eckhardt
   3  *           Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
   4  *
   5  *      Linux scsi disk driver
   6  *              Initial versions: Drew Eckhardt
   7  *              Subsequent revisions: Eric Youngdale
   8  *      Modification history:
   9  *       - Drew Eckhardt <drew@colorado.edu> original
  10  *       - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
  11  *         outstanding request, and other enhancements.
  12  *         Support loadable low-level scsi drivers.
  13  *       - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
  14  *         eight major numbers.
  15  *       - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
  16  *       - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
  17  *         sd_init and cleanups.
  18  *       - Alex Davis <letmein@erols.com> Fix problem where partition info
  19  *         not being read in sd_open. Fix problem where removable media
  20  *         could be ejected after sd_open.
  21  *       - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
  22  *       - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
  23  *         <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
  24  *         Support 32k/1M disks.
  25  *
  26  *      Logging policy (needs CONFIG_SCSI_LOGGING defined):
  27  *       - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
  28  *       - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
  29  *       - entering sd_ioctl: SCSI_LOG_IOCTL level 1
  30  *       - entering other commands: SCSI_LOG_HLQUEUE level 3
  31  *      Note: when the logging level is set by the user, it must be greater
  32  *      than the level indicated above to trigger output.
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/fs.h>
  37 #include <linux/kernel.h>
  38 #include <linux/mm.h>
  39 #include <linux/bio.h>
  40 #include <linux/genhd.h>
  41 #include <linux/hdreg.h>
  42 #include <linux/errno.h>
  43 #include <linux/idr.h>
  44 #include <linux/interrupt.h>
  45 #include <linux/init.h>
  46 #include <linux/blkdev.h>
  47 #include <linux/blkpg.h>
  48 #include <linux/delay.h>
  49 #include <linux/mutex.h>
  50 #include <linux/string_helpers.h>
  51 #include <linux/async.h>
  52 #include <linux/slab.h>
  53 #include <linux/sed-opal.h>
  54 #include <linux/pm_runtime.h>
  55 #include <linux/pr.h>
  56 #include <linux/t10-pi.h>
  57 #include <linux/uaccess.h>
  58 #include <asm/unaligned.h>
  59
  60 #include <scsi/scsi.h>
  61 #include <scsi/scsi_cmnd.h>
  62 #include <scsi/scsi_dbg.h>
  63 #include <scsi/scsi_device.h>
  64 #include <scsi/scsi_driver.h>
  65 #include <scsi/scsi_eh.h>
  66 #include <scsi/scsi_host.h>
  67 #include <scsi/scsi_ioctl.h>
  68 #include <scsi/scsicam.h>
  69
  70 #include "sd.h"
  71 #include "scsi_priv.h"
  72 #include "scsi_logging.h"
  73
  74 MODULE_AUTHOR("Eric Youngdale");
  75 MODULE_DESCRIPTION("SCSI disk (sd) driver");
  76 MODULE_LICENSE("GPL");
  77
  78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
  79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
  80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
  81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
  82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
  83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
  84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
  85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
  86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
  87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
  88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
  89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
  90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
  91 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
  92 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
  93 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
  94 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
  95 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
  96 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
  97 MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
  98
  99 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
 100 #define SD_MINORS       16
 101 #else
 102 #define SD_MINORS       0
 103 #endif
 104
 105 static void sd_config_discard(struct scsi_disk *, unsigned int);
 106 static void sd_config_write_same(struct scsi_disk *);
 107 static int  sd_revalidate_disk(struct gendisk *);
 108 static void sd_unlock_native_capacity(struct gendisk *disk);
 109 static int  sd_probe(struct device *);
 110 static int  sd_remove(struct device *);
 111 static void sd_shutdown(struct device *);
 112 static int sd_suspend_system(struct device *);
 113 static int sd_suspend_runtime(struct device *);
 114 static int sd_resume(struct device *);
 115 static void sd_rescan(struct device *);
 116 static int sd_init_command(struct scsi_cmnd *SCpnt);
 117 static void sd_uninit_command(struct scsi_cmnd *SCpnt);
 118 static int sd_done(struct scsi_cmnd *);
 119 static void sd_eh_reset(struct scsi_cmnd *);
 120 static int sd_eh_action(struct scsi_cmnd *, int);
 121 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
 122 static void scsi_disk_release(struct device *cdev);
 123 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
 124 static void sd_print_result(const struct scsi_disk *, const char *, int);
 125
 126 static DEFINE_SPINLOCK(sd_index_lock);
 127 static DEFINE_IDA(sd_index_ida);
 128
 129 /* This semaphore is used to mediate the 0->1 reference get in the
 130  * face of object destruction (i.e. we can't allow a get on an
 131  * object after last put) */
 132 static DEFINE_MUTEX(sd_ref_mutex);
 133
 134 static struct kmem_cache *sd_cdb_cache;
 135 static mempool_t *sd_cdb_pool;
 136
 137 static const char *sd_cache_types[] = {
 138         "write through", "none", "write back",
 139         "write back, no read (daft)"
 140 };
 141
 142 static void sd_set_flush_flag(struct scsi_disk *sdkp)
 143 {
 144         bool wc = false, fua = false;
 145
 146         if (sdkp->WCE) {
 147                 wc = true;
 148                 if (sdkp->DPOFUA)
 149                         fua = true;
 150         }
 151
 152         blk_queue_write_cache(sdkp->disk->queue, wc, fua);
 153 }
 154
 155 static ssize_t
 156 cache_type_store(struct device *dev, struct device_attribute *attr,
 157                  const char *buf, size_t count)
 158 {
 159         int ct, rcd, wce, sp;
 160         struct scsi_disk *sdkp = to_scsi_disk(dev);
 161         struct scsi_device *sdp = sdkp->device;
 162         char buffer[64];
 163         char *buffer_data;
 164         struct scsi_mode_data data;
 165         struct scsi_sense_hdr sshdr;
 166         static const char temp[] = "temporary ";
 167         int len;
 168
 169         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
 170                 /* no cache control on RBC devices; theoretically they
 171                  * can do it, but there's probably so many exceptions
 172                  * it's not worth the risk */
 173                 return -EINVAL;
 174
 175         if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
 176                 buf += sizeof(temp) - 1;
 177                 sdkp->cache_override = 1;
 178         } else {
 179                 sdkp->cache_override = 0;
 180         }
 181
 182         ct = sysfs_match_string(sd_cache_types, buf);
 183         if (ct < 0)
 184                 return -EINVAL;
 185
 186         rcd = ct & 0x01 ? 1 : 0;
 187         wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0;
 188
 189         if (sdkp->cache_override) {
 190                 sdkp->WCE = wce;
 191                 sdkp->RCD = rcd;
 192                 sd_set_flush_flag(sdkp);
 193                 return count;
 194         }
 195
 196         if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
 197                             SD_MAX_RETRIES, &data, NULL))
 198                 return -EINVAL;
 199         len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
 200                   data.block_descriptor_length);
 201         buffer_data = buffer + data.header_length +
 202                 data.block_descriptor_length;
 203         buffer_data[2] &= ~0x05;
 204         buffer_data[2] |= wce << 2 | rcd;
 205         sp = buffer_data[0] & 0x80 ? 1 : 0;
 206         buffer_data[0] &= ~0x80;
 207
 208         if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
 209                              SD_MAX_RETRIES, &data, &sshdr)) {
 210                 if (scsi_sense_valid(&sshdr))
 211                         sd_print_sense_hdr(sdkp, &sshdr);
 212                 return -EINVAL;
 213         }
 214         revalidate_disk(sdkp->disk);
 215         return count;
 216 }
 217
 218 static ssize_t
 219 manage_start_stop_show(struct device *dev, struct device_attribute *attr,
 220                        char *buf)
 221 {
 222         struct scsi_disk *sdkp = to_scsi_disk(dev);
 223         struct scsi_device *sdp = sdkp->device;
 224
 225         return sprintf(buf, "%u\n", sdp->manage_start_stop);
 226 }
 227
 228 static ssize_t
 229 manage_start_stop_store(struct device *dev, struct device_attribute *attr,
 230                         const char *buf, size_t count)
 231 {
 232         struct scsi_disk *sdkp = to_scsi_disk(dev);
 233         struct scsi_device *sdp = sdkp->device;
 234         bool v;
 235
 236         if (!capable(CAP_SYS_ADMIN))
 237                 return -EACCES;
 238
 239         if (kstrtobool(buf, &v))
 240                 return -EINVAL;
 241
 242         sdp->manage_start_stop = v;
 243
 244         return count;
 245 }
 246 static DEVICE_ATTR_RW(manage_start_stop);
 247
 248 static ssize_t
 249 allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
 250 {
 251         struct scsi_disk *sdkp = to_scsi_disk(dev);
 252
 253         return sprintf(buf, "%u\n", sdkp->device->allow_restart);
 254 }
 255
 256 static ssize_t
 257 allow_restart_store(struct device *dev, struct device_attribute *attr,
 258                     const char *buf, size_t count)
 259 {
 260         bool v;
 261         struct scsi_disk *sdkp = to_scsi_disk(dev);
 262         struct scsi_device *sdp = sdkp->device;
 263
 264         if (!capable(CAP_SYS_ADMIN))
 265                 return -EACCES;
 266
 267         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
 268                 return -EINVAL;
 269
 270         if (kstrtobool(buf, &v))
 271                 return -EINVAL;
 272
 273         sdp->allow_restart = v;
 274
 275         return count;
 276 }
 277 static DEVICE_ATTR_RW(allow_restart);
 278
 279 static ssize_t
 280 cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
 281 {
 282         struct scsi_disk *sdkp = to_scsi_disk(dev);
 283         int ct = sdkp->RCD + 2*sdkp->WCE;
 284
 285         return sprintf(buf, "%s\n", sd_cache_types[ct]);
 286 }
 287 static DEVICE_ATTR_RW(cache_type);
 288
 289 static ssize_t
 290 FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
 291 {
 292         struct scsi_disk *sdkp = to_scsi_disk(dev);
 293
 294         return sprintf(buf, "%u\n", sdkp->DPOFUA);
 295 }
 296 static DEVICE_ATTR_RO(FUA);
 297
 298 static ssize_t
 299 protection_type_show(struct device *dev, struct device_attribute *attr,
 300                      char *buf)
 301 {
 302         struct scsi_disk *sdkp = to_scsi_disk(dev);
 303
 304         return sprintf(buf, "%u\n", sdkp->protection_type);
 305 }
 306
 307 static ssize_t
 308 protection_type_store(struct device *dev, struct device_attribute *attr,
 309                       const char *buf, size_t count)
 310 {
 311         struct scsi_disk *sdkp = to_scsi_disk(dev);
 312         unsigned int val;
 313         int err;
 314
 315         if (!capable(CAP_SYS_ADMIN))
 316                 return -EACCES;
 317
 318         err = kstrtouint(buf, 10, &val);
 319
 320         if (err)
 321                 return err;
 322
 323         if (val <= T10_PI_TYPE3_PROTECTION)
 324                 sdkp->protection_type = val;
 325
 326         return count;
 327 }
 328 static DEVICE_ATTR_RW(protection_type);
 329
 330 static ssize_t
 331 protection_mode_show(struct device *dev, struct device_attribute *attr,
 332                      char *buf)
 333 {
 334         struct scsi_disk *sdkp = to_scsi_disk(dev);
 335         struct scsi_device *sdp = sdkp->device;
 336         unsigned int dif, dix;
 337
 338         dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
 339         dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
 340
 341         if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) {
 342                 dif = 0;
 343                 dix = 1;
 344         }
 345
 346         if (!dif && !dix)
 347                 return sprintf(buf, "none\n");
 348
 349         return sprintf(buf, "%s%u\n", dix ? "dix" : "dif", dif);
 350 }
 351 static DEVICE_ATTR_RO(protection_mode);
 352
 353 static ssize_t
 354 app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
 355 {
 356         struct scsi_disk *sdkp = to_scsi_disk(dev);
 357
 358         return sprintf(buf, "%u\n", sdkp->ATO);
 359 }
 360 static DEVICE_ATTR_RO(app_tag_own);
 361
 362 static ssize_t
 363 thin_provisioning_show(struct device *dev, struct device_attribute *attr,
 364                        char *buf)
 365 {
 366         struct scsi_disk *sdkp = to_scsi_disk(dev);
 367
 368         return sprintf(buf, "%u\n", sdkp->lbpme);
 369 }
 370 static DEVICE_ATTR_RO(thin_provisioning);
 371
 372 /* sysfs_match_string() requires dense arrays */
 373 static const char *lbp_mode[] = {
 374         [SD_LBP_FULL]           = "full",
 375         [SD_LBP_UNMAP]          = "unmap",
 376         [SD_LBP_WS16]           = "writesame_16",
 377         [SD_LBP_WS10]           = "writesame_10",
 378         [SD_LBP_ZERO]           = "writesame_zero",
 379         [SD_LBP_DISABLE]        = "disabled",
 380 };
 381
 382 static ssize_t
 383 provisioning_mode_show(struct device *dev, struct device_attribute *attr,
 384                        char *buf)
 385 {
 386         struct scsi_disk *sdkp = to_scsi_disk(dev);
 387
 388         return sprintf(buf, "%s\n", lbp_mode[sdkp->provisioning_mode]);
 389 }
 390
 391 static ssize_t
 392 provisioning_mode_store(struct device *dev, struct device_attribute *attr,
 393                         const char *buf, size_t count)
 394 {
 395         struct scsi_disk *sdkp = to_scsi_disk(dev);
 396         struct scsi_device *sdp = sdkp->device;
 397         int mode;
 398
 399         if (!capable(CAP_SYS_ADMIN))
 400                 return -EACCES;
 401
 402         if (sd_is_zoned(sdkp)) {
 403                 sd_config_discard(sdkp, SD_LBP_DISABLE);
 404                 return count;
 405         }
 406
 407         if (sdp->type != TYPE_DISK)
 408                 return -EINVAL;
 409
 410         mode = sysfs_match_string(lbp_mode, buf);
 411         if (mode < 0)
 412                 return -EINVAL;
 413
 414         sd_config_discard(sdkp, mode);
 415
 416         return count;
 417 }
 418 static DEVICE_ATTR_RW(provisioning_mode);
 419
 420 /* sysfs_match_string() requires dense arrays */
 421 static const char *zeroing_mode[] = {
 422         [SD_ZERO_WRITE]         = "write",
 423         [SD_ZERO_WS]            = "writesame",
 424         [SD_ZERO_WS16_UNMAP]    = "writesame_16_unmap",
 425         [SD_ZERO_WS10_UNMAP]    = "writesame_10_unmap",
 426 };
 427
 428 static ssize_t
 429 zeroing_mode_show(struct device *dev, struct device_attribute *attr,
 430                   char *buf)
 431 {
 432         struct scsi_disk *sdkp = to_scsi_disk(dev);
 433
 434         return sprintf(buf, "%s\n", zeroing_mode[sdkp->zeroing_mode]);
 435 }
 436
 437 static ssize_t
 438 zeroing_mode_store(struct device *dev, struct device_attribute *attr,
 439                    const char *buf, size_t count)
 440 {
 441         struct scsi_disk *sdkp = to_scsi_disk(dev);
 442         int mode;
 443
 444         if (!capable(CAP_SYS_ADMIN))
 445                 return -EACCES;
 446
 447         mode = sysfs_match_string(zeroing_mode, buf);
 448         if (mode < 0)
 449                 return -EINVAL;
 450
 451         sdkp->zeroing_mode = mode;
 452
 453         return count;
 454 }
 455 static DEVICE_ATTR_RW(zeroing_mode);
 456
 457 static ssize_t
 458 max_medium_access_timeouts_show(struct device *dev,
 459                                 struct device_attribute *attr, char *buf)
 460 {
 461         struct scsi_disk *sdkp = to_scsi_disk(dev);
 462
 463         return sprintf(buf, "%u\n", sdkp->max_medium_access_timeouts);
 464 }
 465
 466 static ssize_t
 467 max_medium_access_timeouts_store(struct device *dev,
 468                                  struct device_attribute *attr, const char *buf,
 469                                  size_t count)
 470 {
 471         struct scsi_disk *sdkp = to_scsi_disk(dev);
 472         int err;
 473
 474         if (!capable(CAP_SYS_ADMIN))
 475                 return -EACCES;
 476
 477         err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
 478
 479         return err ? err : count;
 480 }
 481 static DEVICE_ATTR_RW(max_medium_access_timeouts);
 482
 483 static ssize_t
 484 max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
 485                            char *buf)
 486 {
 487         struct scsi_disk *sdkp = to_scsi_disk(dev);
 488
 489         return sprintf(buf, "%u\n", sdkp->max_ws_blocks);
 490 }
 491
 492 static ssize_t
 493 max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
 494                             const char *buf, size_t count)
 495 {
 496         struct scsi_disk *sdkp = to_scsi_disk(dev);
 497         struct scsi_device *sdp = sdkp->device;
 498         unsigned long max;
 499         int err;
 500
 501         if (!capable(CAP_SYS_ADMIN))
 502                 return -EACCES;
 503
 504         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
 505                 return -EINVAL;
 506
 507         err = kstrtoul(buf, 10, &max);
 508
 509         if (err)
 510                 return err;
 511
 512         if (max == 0)
 513                 sdp->no_write_same = 1;
 514         else if (max <= SD_MAX_WS16_BLOCKS) {
 515                 sdp->no_write_same = 0;
 516                 sdkp->max_ws_blocks = max;
 517         }
 518
 519         sd_config_write_same(sdkp);
 520
 521         return count;
 522 }
 523 static DEVICE_ATTR_RW(max_write_same_blocks);
 524
 525 static struct attribute *sd_disk_attrs[] = {
 526         &dev_attr_cache_type.attr,
 527         &dev_attr_FUA.attr,
 528         &dev_attr_allow_restart.attr,
 529         &dev_attr_manage_start_stop.attr,
 530         &dev_attr_protection_type.attr,
 531         &dev_attr_protection_mode.attr,
 532         &dev_attr_app_tag_own.attr,
 533         &dev_attr_thin_provisioning.attr,
 534         &dev_attr_provisioning_mode.attr,
 535         &dev_attr_zeroing_mode.attr,
 536         &dev_attr_max_write_same_blocks.attr,
 537         &dev_attr_max_medium_access_timeouts.attr,
 538         NULL,
 539 };
 540 ATTRIBUTE_GROUPS(sd_disk);
 541
 542 static struct class sd_disk_class = {
 543         .name           = "scsi_disk",
 544         .owner          = THIS_MODULE,
 545         .dev_release    = scsi_disk_release,
 546         .dev_groups     = sd_disk_groups,
 547 };
 548
 549 static const struct dev_pm_ops sd_pm_ops = {
 550         .suspend                = sd_suspend_system,
 551         .resume                 = sd_resume,
 552         .poweroff               = sd_suspend_system,
 553         .restore                = sd_resume,
 554         .runtime_suspend        = sd_suspend_runtime,
 555         .runtime_resume         = sd_resume,
 556 };
 557
 558 static struct scsi_driver sd_template = {
 559         .gendrv = {
 560                 .name           = "sd",
 561                 .owner          = THIS_MODULE,
 562                 .probe          = sd_probe,
 563                 .remove         = sd_remove,
 564                 .shutdown       = sd_shutdown,
 565                 .pm             = &sd_pm_ops,
 566         },
 567         .rescan                 = sd_rescan,
 568         .init_command           = sd_init_command,
 569         .uninit_command         = sd_uninit_command,
 570         .done                   = sd_done,
 571         .eh_action              = sd_eh_action,
 572         .eh_reset               = sd_eh_reset,
 573 };
 574
 575 /*
 576  * Dummy kobj_map->probe function.
 577  * The default ->probe function will call modprobe, which is
 578  * pointless as this module is already loaded.
 579  */
 580 static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data)
 581 {
 582         return NULL;
 583 }
 584
 585 /*
 586  * Device no to disk mapping:
 587  *
 588  *       major         disc2     disc  p1
 589  *   |............|.............|....|....| <- dev_t
 590  *    31        20 19          8 7  4 3  0
 591  *
 592  * Inside a major, we have 16k disks, however mapped non-
 593  * contiguously. The first 16 disks are for major0, the next
 594  * ones with major1, ... Disk 256 is for major0 again, disk 272
 595  * for major1, ...
 596  * As we stay compatible with our numbering scheme, we can reuse
 597  * the well-know SCSI majors 8, 65--71, 136--143.
 598  */
 599 static int sd_major(int major_idx)
 600 {
 601         switch (major_idx) {
 602         case 0:
 603                 return SCSI_DISK0_MAJOR;
 604         case 1 ... 7:
 605                 return SCSI_DISK1_MAJOR + major_idx - 1;
 606         case 8 ... 15:
 607                 return SCSI_DISK8_MAJOR + major_idx - 8;
 608         default:
 609                 BUG();
 610                 return 0;       /* shut up gcc */
 611         }
 612 }
 613
 614 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
 615 {
 616         struct scsi_disk *sdkp = NULL;
 617
 618         mutex_lock(&sd_ref_mutex);
 619
 620         if (disk->private_data) {
 621                 sdkp = scsi_disk(disk);
 622                 if (scsi_device_get(sdkp->device) == 0)
 623                         get_device(&sdkp->dev);
 624                 else
 625                         sdkp = NULL;
 626         }
 627         mutex_unlock(&sd_ref_mutex);
 628         return sdkp;
 629 }
 630
 631 static void scsi_disk_put(struct scsi_disk *sdkp)
 632 {
 633         struct scsi_device *sdev = sdkp->device;
 634
 635         mutex_lock(&sd_ref_mutex);
 636         put_device(&sdkp->dev);
 637         scsi_device_put(sdev);
 638         mutex_unlock(&sd_ref_mutex);
 639 }
 640
 641 #ifdef CONFIG_BLK_SED_OPAL
 642 static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
 643                 size_t len, bool send)
 644 {
 645         struct scsi_device *sdev = data;
 646         u8 cdb[12] = { 0, };
 647         int ret;
 648
 649         cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
 650         cdb[1] = secp;
 651         put_unaligned_be16(spsp, &cdb[2]);
 652         put_unaligned_be32(len, &cdb[6]);
 653
 654         ret = scsi_execute_req(sdev, cdb,
 655                         send ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
 656                         buffer, len, NULL, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
 657         return ret <= 0 ? ret : -EIO;
 658 }
 659 #endif /* CONFIG_BLK_SED_OPAL */
 660
 661 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
 662                                            unsigned int dix, unsigned int dif)
 663 {
 664         struct bio *bio = scmd->request->bio;
 665         unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
 666         unsigned int protect = 0;
 667
 668         if (dix) {                              /* DIX Type 0, 1, 2, 3 */
 669                 if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
 670                         scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
 671
 672                 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
 673                         scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
 674         }
 675
 676         if (dif != T10_PI_TYPE3_PROTECTION) {   /* DIX/DIF Type 0, 1, 2 */
 677                 scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
 678
 679                 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
 680                         scmd->prot_flags |= SCSI_PROT_REF_CHECK;
 681         }
 682
 683         if (dif) {                              /* DIX/DIF Type 1, 2, 3 */
 684                 scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
 685
 686                 if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
 687                         protect = 3 << 5;       /* Disable target PI checking */
 688                 else
 689                         protect = 1 << 5;       /* Enable target PI checking */
 690         }
 691
 692         scsi_set_prot_op(scmd, prot_op);
 693         scsi_set_prot_type(scmd, dif);
 694         scmd->prot_flags &= sd_prot_flag_mask(prot_op);
 695
 696         return protect;
 697 }
 698
 699 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 700 {
 701         struct request_queue *q = sdkp->disk->queue;
 702         unsigned int logical_block_size = sdkp->device->sector_size;
 703         unsigned int max_blocks = 0;
 704
 705         q->limits.discard_alignment =
 706                 sdkp->unmap_alignment * logical_block_size;
 707         q->limits.discard_granularity =
 708                 max(sdkp->physical_block_size,
 709                     sdkp->unmap_granularity * logical_block_size);
 710         sdkp->provisioning_mode = mode;
 711
 712         switch (mode) {
 713
 714         case SD_LBP_FULL:
 715         case SD_LBP_DISABLE:
 716                 blk_queue_max_discard_sectors(q, 0);
 717                 blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
 718                 return;
 719
 720         case SD_LBP_UNMAP:
 721                 max_blocks = min_not_zero(sdkp->max_unmap_blocks,
 722                                           (u32)SD_MAX_WS16_BLOCKS);
 723                 break;
 724
 725         case SD_LBP_WS16:
 726                 if (sdkp->device->unmap_limit_for_ws)
 727                         max_blocks = sdkp->max_unmap_blocks;
 728                 else
 729                         max_blocks = sdkp->max_ws_blocks;
 730
 731                 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS16_BLOCKS);
 732                 break;
 733
 734         case SD_LBP_WS10:
 735                 if (sdkp->device->unmap_limit_for_ws)
 736                         max_blocks = sdkp->max_unmap_blocks;
 737                 else
 738                         max_blocks = sdkp->max_ws_blocks;
 739
 740                 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS10_BLOCKS);
 741                 break;
 742
 743         case SD_LBP_ZERO:
 744                 max_blocks = min_not_zero(sdkp->max_ws_blocks,
 745                                           (u32)SD_MAX_WS10_BLOCKS);
 746                 break;
 747         }
 748
 749         blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9));
 750         blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
 751 }
 752
 753 static int sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
 754 {
 755         struct scsi_device *sdp = cmd->device;
 756         struct request *rq = cmd->request;
 757         u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
 758         u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
 759         unsigned int data_len = 24;
 760         char *buf;
 761
 762         rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
 763         if (!rq->special_vec.bv_page)
 764                 return BLKPREP_DEFER;
 765         rq->special_vec.bv_offset = 0;
 766         rq->special_vec.bv_len = data_len;
 767         rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 768
 769         cmd->cmd_len = 10;
 770         cmd->cmnd[0] = UNMAP;
 771         cmd->cmnd[8] = 24;
 772
 773         buf = page_address(rq->special_vec.bv_page);
 774         put_unaligned_be16(6 + 16, &buf[0]);
 775         put_unaligned_be16(16, &buf[2]);
 776         put_unaligned_be64(sector, &buf[8]);
 777         put_unaligned_be32(nr_sectors, &buf[16]);
 778
 779         cmd->allowed = SD_MAX_RETRIES;
 780         cmd->transfersize = data_len;
 781         rq->timeout = SD_TIMEOUT;
 782         scsi_req(rq)->resid_len = data_len;
 783
 784         return scsi_init_io(cmd);
 785 }
 786
 787 static int sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd, bool unmap)
 788 {
 789         struct scsi_device *sdp = cmd->device;
 790         struct request *rq = cmd->request;
 791         u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
 792         u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
 793         u32 data_len = sdp->sector_size;
 794
 795         rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
 796         if (!rq->special_vec.bv_page)
 797                 return BLKPREP_DEFER;
 798         rq->special_vec.bv_offset = 0;
 799         rq->special_vec.bv_len = data_len;
 800         rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 801
 802         cmd->cmd_len = 16;
 803         cmd->cmnd[0] = WRITE_SAME_16;
 804         if (unmap)
 805                 cmd->cmnd[1] = 0x8; /* UNMAP */
 806         put_unaligned_be64(sector, &cmd->cmnd[2]);
 807         put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
 808
 809         cmd->allowed = SD_MAX_RETRIES;
 810         cmd->transfersize = data_len;
 811         rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
 812         scsi_req(rq)->resid_len = data_len;
 813
 814         return scsi_init_io(cmd);
 815 }
 816
 817 static int sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd, bool unmap)
 818 {
 819         struct scsi_device *sdp = cmd->device;
 820         struct request *rq = cmd->request;
 821         u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
 822         u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
 823         u32 data_len = sdp->sector_size;
 824
 825         rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
 826         if (!rq->special_vec.bv_page)
 827                 return BLKPREP_DEFER;
 828         rq->special_vec.bv_offset = 0;
 829         rq->special_vec.bv_len = data_len;
 830         rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 831
 832         cmd->cmd_len = 10;
 833         cmd->cmnd[0] = WRITE_SAME;
 834         if (unmap)
 835                 cmd->cmnd[1] = 0x8; /* UNMAP */
 836         put_unaligned_be32(sector, &cmd->cmnd[2]);
 837         put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
 838
 839         cmd->allowed = SD_MAX_RETRIES;
 840         cmd->transfersize = data_len;
 841         rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
 842         scsi_req(rq)->resid_len = data_len;
 843
 844         return scsi_init_io(cmd);
 845 }
 846
 847 static int sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
 848 {
 849         struct request *rq = cmd->request;
 850         struct scsi_device *sdp = cmd->device;
 851         struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 852         u64 sector = blk_rq_pos(rq) >> (ilog2(sdp->sector_size) - 9);
 853         u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
 854
 855         if (!(rq->cmd_flags & REQ_NOUNMAP)) {
 856                 switch (sdkp->zeroing_mode) {
 857                 case SD_ZERO_WS16_UNMAP:
 858                         return sd_setup_write_same16_cmnd(cmd, true);
 859                 case SD_ZERO_WS10_UNMAP:
 860                         return sd_setup_write_same10_cmnd(cmd, true);
 861                 }
 862         }
 863
 864         if (sdp->no_write_same)
 865                 return BLKPREP_INVALID;
 866
 867         if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff)
 868                 return sd_setup_write_same16_cmnd(cmd, false);
 869
 870         return sd_setup_write_same10_cmnd(cmd, false);
 871 }
 872
 873 static void sd_config_write_same(struct scsi_disk *sdkp)
 874 {
 875         struct request_queue *q = sdkp->disk->queue;
 876         unsigned int logical_block_size = sdkp->device->sector_size;
 877
 878         if (sdkp->device->no_write_same) {
 879                 sdkp->max_ws_blocks = 0;
 880                 goto out;
 881         }
 882
 883         /* Some devices can not handle block counts above 0xffff despite
 884          * supporting WRITE SAME(16). Consequently we default to 64k
 885          * blocks per I/O unless the device explicitly advertises a
 886          * bigger limit.
 887          */
 888         if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
 889                 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
 890                                                    (u32)SD_MAX_WS16_BLOCKS);
 891         else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
 892                 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
 893                                                    (u32)SD_MAX_WS10_BLOCKS);
 894         else {
 895                 sdkp->device->no_write_same = 1;
 896                 sdkp->max_ws_blocks = 0;
 897         }
 898
 899         if (sdkp->lbprz && sdkp->lbpws)
 900                 sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP;
 901         else if (sdkp->lbprz && sdkp->lbpws10)
 902                 sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP;
 903         else if (sdkp->max_ws_blocks)
 904                 sdkp->zeroing_mode = SD_ZERO_WS;
 905         else
 906                 sdkp->zeroing_mode = SD_ZERO_WRITE;
 907
 908         if (sdkp->max_ws_blocks &&
 909             sdkp->physical_block_size > logical_block_size) {
 910                 /*
 911                  * Reporting a maximum number of blocks that is not aligned
 912                  * on the device physical size would cause a large write same
 913                  * request to be split into physically unaligned chunks by
 914                  * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same()
 915                  * even if the caller of these functions took care to align the
 916                  * large request. So make sure the maximum reported is aligned
 917                  * to the device physical block size. This is only an optional
 918                  * optimization for regular disks, but this is mandatory to
 919                  * avoid failure of large write same requests directed at
 920                  * sequential write required zones of host-managed ZBC disks.
 921                  */
 922                 sdkp->max_ws_blocks =
 923                         round_down(sdkp->max_ws_blocks,
 924                                    bytes_to_logical(sdkp->device,
 925                                                     sdkp->physical_block_size));
 926         }
 927
 928 out:
 929         blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
 930                                          (logical_block_size >> 9));
 931         blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks *
 932                                          (logical_block_size >> 9));
 933 }
 934
 935 /**
 936  * sd_setup_write_same_cmnd - write the same data to multiple blocks
 937  * @cmd: command to prepare
 938  *
 939  * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on
 940  * the preference indicated by the target device.
 941  **/
 942 static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 943 {
 944         struct request *rq = cmd->request;
 945         struct scsi_device *sdp = cmd->device;
 946         struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 947         struct bio *bio = rq->bio;
 948         sector_t sector = blk_rq_pos(rq);
 949         unsigned int nr_sectors = blk_rq_sectors(rq);
 950         unsigned int nr_bytes = blk_rq_bytes(rq);
 951         int ret;
 952
 953         if (sdkp->device->no_write_same)
 954                 return BLKPREP_INVALID;
 955
 956         BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
 957
 958         sector >>= ilog2(sdp->sector_size) - 9;
 959         nr_sectors >>= ilog2(sdp->sector_size) - 9;
 960
 961         rq->timeout = SD_WRITE_SAME_TIMEOUT;
 962
 963         if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
 964                 cmd->cmd_len = 16;
 965                 cmd->cmnd[0] = WRITE_SAME_16;
 966                 put_unaligned_be64(sector, &cmd->cmnd[2]);
 967                 put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
 968         } else {
 969                 cmd->cmd_len = 10;
 970                 cmd->cmnd[0] = WRITE_SAME;
 971                 put_unaligned_be32(sector, &cmd->cmnd[2]);
 972                 put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
 973         }
 974
 975         cmd->transfersize = sdp->sector_size;
 976         cmd->allowed = SD_MAX_RETRIES;
 977
 978         /*
 979          * For WRITE SAME the data transferred via the DATA OUT buffer is
 980          * different from the amount of data actually written to the target.
 981          *
 982          * We set up __data_len to the amount of data transferred via the
 983          * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list
 984          * to transfer a single sector of data first, but then reset it to
 985          * the amount of data to be written right after so that the I/O path
 986          * knows how much to actually write.
 987          */
 988         rq->__data_len = sdp->sector_size;
 989         ret = scsi_init_io(cmd);
 990         rq->__data_len = nr_bytes;
 991
 992         return ret;
 993 }
 994
 995 static int sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 996 {
 997         struct request *rq = cmd->request;
 998
 999         /* flush requests don't perform I/O, zero the S/G table */
1000         memset(&cmd->sdb, 0, sizeof(cmd->sdb));
1001
1002         cmd->cmnd[0] = SYNCHRONIZE_CACHE;
1003         cmd->cmd_len = 10;
1004         cmd->transfersize = 0;
1005         cmd->allowed = SD_MAX_RETRIES;
1006
1007         rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
1008         return BLKPREP_OK;
1009 }
1010
1011 static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
1012 {
1013         struct request *rq = SCpnt->request;
1014         struct scsi_device *sdp = SCpnt->device;
1015         struct gendisk *disk = rq->rq_disk;
1016         struct scsi_disk *sdkp = scsi_disk(disk);
1017         sector_t block = blk_rq_pos(rq);
1018         sector_t threshold;
1019         unsigned int this_count = blk_rq_sectors(rq);
1020         unsigned int dif, dix;
1021         int ret;
1022         unsigned char protect;
1023
1024         ret = scsi_init_io(SCpnt);
1025         if (ret != BLKPREP_OK)
1026                 return ret;
1027         WARN_ON_ONCE(SCpnt != rq->special);
1028
1029         /* from here on until we're complete, any goto out
1030          * is used for a killable error condition */
1031         ret = BLKPREP_KILL;
1032
1033         SCSI_LOG_HLQUEUE(1,
1034                 scmd_printk(KERN_INFO, SCpnt,
1035                         "%s: block=%llu, count=%d\n",
1036                         __func__, (unsigned long long)block, this_count));
1037
1038         if (!sdp || !scsi_device_online(sdp) ||
1039             block + blk_rq_sectors(rq) > get_capacity(disk)) {
1040                 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1041                                                 "Finishing %u sectors\n",
1042                                                 blk_rq_sectors(rq)));
1043                 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1044                                                 "Retry with 0x%p\n", SCpnt));
1045                 goto out;
1046         }
1047
1048         if (sdp->changed) {
1049                 /*
1050                  * quietly refuse to do anything to a changed disc until
1051                  * the changed bit has been reset
1052                  */
1053                 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
1054                 goto out;
1055         }
1056
1057         /*
1058          * Some SD card readers can't handle multi-sector accesses which touch
1059          * the last one or two hardware sectors.  Split accesses as needed.
1060          */
1061         threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
1062                 (sdp->sector_size / 512);
1063
1064         if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
1065                 if (block < threshold) {
1066                         /* Access up to the threshold but not beyond */
1067                         this_count = threshold - block;
1068                 } else {
1069                         /* Access only a single hardware sector */
1070                         this_count = sdp->sector_size / 512;
1071                 }
1072         }
1073
1074         SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
1075                                         (unsigned long long)block));
1076
1077         /*
1078          * If we have a 1K hardware sectorsize, prevent access to single
1079          * 512 byte sectors.  In theory we could handle this - in fact
1080          * the scsi cdrom driver must be able to handle this because
1081          * we typically use 1K blocksizes, and cdroms typically have
1082          * 2K hardware sectorsizes.  Of course, things are simpler
1083          * with the cdrom, since it is read-only.  For performance
1084          * reasons, the filesystems should be able to handle this
1085          * and not force the scsi disk driver to use bounce buffers
1086          * for this.
1087          */
1088         if (sdp->sector_size == 1024) {
1089                 if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
1090                         scmd_printk(KERN_ERR, SCpnt,
1091                                     "Bad block number requested\n");
1092                         goto out;
1093                 } else {
1094                         block = block >> 1;
1095                         this_count = this_count >> 1;
1096                 }
1097         }
1098         if (sdp->sector_size == 2048) {
1099                 if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
1100                         scmd_printk(KERN_ERR, SCpnt,
1101                                     "Bad block number requested\n");
1102                         goto out;
1103                 } else {
1104                         block = block >> 2;
1105                         this_count = this_count >> 2;
1106                 }
1107         }
1108         if (sdp->sector_size == 4096) {
1109                 if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
1110                         scmd_printk(KERN_ERR, SCpnt,
1111                                     "Bad block number requested\n");
1112                         goto out;
1113                 } else {
1114                         block = block >> 3;
1115                         this_count = this_count >> 3;
1116                 }
1117         }
1118         if (rq_data_dir(rq) == WRITE) {
1119                 SCpnt->cmnd[0] = WRITE_6;
1120
1121                 if (blk_integrity_rq(rq))
1122                         sd_dif_prepare(SCpnt);
1123
1124         } else if (rq_data_dir(rq) == READ) {
1125                 SCpnt->cmnd[0] = READ_6;
1126         } else {
1127                 scmd_printk(KERN_ERR, SCpnt, "Unknown command %d\n", req_op(rq));
1128                 goto out;
1129         }
1130
1131         SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
1132                                         "%s %d/%u 512 byte blocks.\n",
1133                                         (rq_data_dir(rq) == WRITE) ?
1134                                         "writing" : "reading", this_count,
1135                                         blk_rq_sectors(rq)));
1136
1137         dix = scsi_prot_sg_count(SCpnt);
1138         dif = scsi_host_dif_capable(SCpnt->device->host, sdkp->protection_type);
1139
1140         if (dif || dix)
1141                 protect = sd_setup_protect_cmnd(SCpnt, dix, dif);
1142         else
1143                 protect = 0;
1144
1145         if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
1146                 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
1147
1148                 if (unlikely(SCpnt->cmnd == NULL)) {
1149                         ret = BLKPREP_DEFER;
1150                         goto out;
1151                 }
1152
1153                 SCpnt->cmd_len = SD_EXT_CDB_SIZE;
1154                 memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
1155                 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
1156                 SCpnt->cmnd[7] = 0x18;
1157                 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
1158                 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1159
1160                 /* LBA */
1161                 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1162                 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1163                 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1164                 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1165                 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
1166                 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
1167                 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
1168                 SCpnt->cmnd[19] = (unsigned char) block & 0xff;
1169
1170                 /* Expected Indirect LBA */
1171                 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
1172                 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
1173                 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
1174                 SCpnt->cmnd[23] = (unsigned char) block & 0xff;
1175
1176                 /* Transfer length */
1177                 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
1178                 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
1179                 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
1180                 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
1181         } else if (sdp->use_16_for_rw || (this_count > 0xffff)) {
1182                 SCpnt->cmnd[0] += READ_16 - READ_6;
1183                 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1184                 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1185                 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1186                 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1187                 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1188                 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
1189                 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
1190                 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
1191                 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
1192                 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
1193                 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
1194                 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
1195                 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
1196                 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
1197         } else if ((this_count > 0xff) || (block > 0x1fffff) ||
1198                    scsi_device_protection(SCpnt->device) ||
1199                    SCpnt->device->use_10_for_rw) {
1200                 SCpnt->cmnd[0] += READ_10 - READ_6;
1201                 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1202                 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
1203                 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
1204                 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
1205                 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
1206                 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
1207                 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
1208                 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
1209         } else {
1210                 if (unlikely(rq->cmd_flags & REQ_FUA)) {
1211                         /*
1212                          * This happens only if this drive failed
1213                          * 10byte rw command with ILLEGAL_REQUEST
1214                          * during operation and thus turned off
1215                          * use_10_for_rw.
1216                          */
1217                         scmd_printk(KERN_ERR, SCpnt,
1218                                     "FUA write on READ/WRITE(6) drive\n");
1219                         goto out;
1220                 }
1221
1222                 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
1223                 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
1224                 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
1225                 SCpnt->cmnd[4] = (unsigned char) this_count;
1226                 SCpnt->cmnd[5] = 0;
1227         }
1228         SCpnt->sdb.length = this_count * sdp->sector_size;
1229
1230         /*
1231          * We shouldn't disconnect in the middle of a sector, so with a dumb
1232          * host adapter, it's safe to assume that we can at least transfer
1233          * this many bytes between each connect / disconnect.
1234          */
1235         SCpnt->transfersize = sdp->sector_size;
1236         SCpnt->underflow = this_count << 9;
1237         SCpnt->allowed = SD_MAX_RETRIES;
1238
1239         /*
1240          * This indicates that the command is ready from our end to be
1241          * queued.
1242          */
1243         ret = BLKPREP_OK;
1244  out:
1245         return ret;
1246 }
1247
1248 static int sd_init_command(struct scsi_cmnd *cmd)
1249 {
1250         struct request *rq = cmd->request;
1251
1252         switch (req_op(rq)) {
1253         case REQ_OP_DISCARD:
1254                 switch (scsi_disk(rq->rq_disk)->provisioning_mode) {
1255                 case SD_LBP_UNMAP:
1256                         return sd_setup_unmap_cmnd(cmd);
1257                 case SD_LBP_WS16:
1258                         return sd_setup_write_same16_cmnd(cmd, true);
1259                 case SD_LBP_WS10:
1260                         return sd_setup_write_same10_cmnd(cmd, true);
1261                 case SD_LBP_ZERO:
1262                         return sd_setup_write_same10_cmnd(cmd, false);
1263                 default:
1264                         return BLKPREP_INVALID;
1265                 }
1266         case REQ_OP_WRITE_ZEROES:
1267                 return sd_setup_write_zeroes_cmnd(cmd);
1268         case REQ_OP_WRITE_SAME:
1269                 return sd_setup_write_same_cmnd(cmd);
1270         case REQ_OP_FLUSH:
1271                 return sd_setup_flush_cmnd(cmd);
1272         case REQ_OP_READ:
1273         case REQ_OP_WRITE:
1274                 return sd_setup_read_write_cmnd(cmd);
1275         case REQ_OP_ZONE_REPORT:
1276                 return sd_zbc_setup_report_cmnd(cmd);
1277         case REQ_OP_ZONE_RESET:
1278                 return sd_zbc_setup_reset_cmnd(cmd);
1279         default:
1280                 BUG();
1281         }
1282 }
1283
1284 static void sd_uninit_command(struct scsi_cmnd *SCpnt)
1285 {
1286         struct request *rq = SCpnt->request;
1287         u8 *cmnd;
1288
1289         if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
1290                 __free_page(rq->special_vec.bv_page);
1291
1292         if (SCpnt->cmnd != scsi_req(rq)->cmd) {
1293                 cmnd = SCpnt->cmnd;
1294                 SCpnt->cmnd = NULL;
1295                 SCpnt->cmd_len = 0;
1296                 mempool_free(cmnd, sd_cdb_pool);
1297         }
1298 }
1299
1300 /**
1301  *      sd_open - open a scsi disk device
1302  *      @bdev: Block device of the scsi disk to open
1303  *      @mode: FMODE_* mask
1304  *
1305  *      Returns 0 if successful. Returns a negated errno value in case
1306  *      of error.
1307  *
1308  *      Note: This can be called from a user context (e.g. fsck(1) )
1309  *      or from within the kernel (e.g. as a result of a mount(1) ).
1310  *      In the latter case @inode and @filp carry an abridged amount
1311  *      of information as noted above.
1312  *
1313  *      Locking: called with bdev->bd_mutex held.
1314  **/
1315 static int sd_open(struct block_device *bdev, fmode_t mode)
1316 {
1317         struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
1318         struct scsi_device *sdev;
1319         int retval;
1320
1321         if (!sdkp)
1322                 return -ENXIO;
1323
1324         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1325
1326         sdev = sdkp->device;
1327
1328         /*
1329          * If the device is in error recovery, wait until it is done.
1330          * If the device is offline, then disallow any access to it.
1331          */
1332         retval = -ENXIO;
1333         if (!scsi_block_when_processing_errors(sdev))
1334                 goto error_out;
1335
1336         if (sdev->removable || sdkp->write_prot)
1337                 check_disk_change(bdev);
1338
1339         /*
1340          * If the drive is empty, just let the open fail.
1341          */
1342         retval = -ENOMEDIUM;
1343         if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
1344                 goto error_out;
1345
1346         /*
1347          * If the device has the write protect tab set, have the open fail
1348          * if the user expects to be able to write to the thing.
1349          */
1350         retval = -EROFS;
1351         if (sdkp->write_prot && (mode & FMODE_WRITE))
1352                 goto error_out;
1353
1354         /*
1355          * It is possible that the disk changing stuff resulted in
1356          * the device being taken offline.  If this is the case,
1357          * report this to the user, and don't pretend that the
1358          * open actually succeeded.
1359          */
1360         retval = -ENXIO;
1361         if (!scsi_device_online(sdev))
1362                 goto error_out;
1363
1364         if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1365                 if (scsi_block_when_processing_errors(sdev))
1366                         scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1367         }
1368
1369         return 0;
1370
1371 error_out:
1372         scsi_disk_put(sdkp);
1373         return retval;
1374 }
1375
1376 /**
1377  *      sd_release - invoked when the (last) close(2) is called on this
1378  *      scsi disk.
1379  *      @disk: disk to release
1380  *      @mode: FMODE_* mask
1381  *
1382  *      Returns 0.
1383  *
1384  *      Note: may block (uninterruptible) if error recovery is underway
1385  *      on this disk.
1386  *
1387  *      Locking: called with bdev->bd_mutex held.
1388  **/
1389 static void sd_release(struct gendisk *disk, fmode_t mode)
1390 {
1391         struct scsi_disk *sdkp = scsi_disk(disk);
1392         struct scsi_device *sdev = sdkp->device;
1393
1394         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1395
1396         if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1397                 if (scsi_block_when_processing_errors(sdev))
1398                         scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1399         }
1400
1401         /*
1402          * XXX and what if there are packets in flight and this close()
1403          * XXX is followed by a "rmmod sd_mod"?
1404          */
1405
1406         scsi_disk_put(sdkp);
1407 }
1408
1409 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1410 {
1411         struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1412         struct scsi_device *sdp = sdkp->device;
1413         struct Scsi_Host *host = sdp->host;
1414         sector_t capacity = logical_to_sectors(sdp, sdkp->capacity);
1415         int diskinfo[4];
1416
1417         /* default to most commonly used values */
1418         diskinfo[0] = 0x40;     /* 1 << 6 */
1419         diskinfo[1] = 0x20;     /* 1 << 5 */
1420         diskinfo[2] = capacity >> 11;
1421
1422         /* override with calculated, extended default, or driver values */
1423         if (host->hostt->bios_param)
1424                 host->hostt->bios_param(sdp, bdev, capacity, diskinfo);
1425         else
1426                 scsicam_bios_param(bdev, capacity, diskinfo);
1427
1428         geo->heads = diskinfo[0];
1429         geo->sectors = diskinfo[1];
1430         geo->cylinders = diskinfo[2];
1431         return 0;
1432 }
1433
1434 /**
1435  *      sd_ioctl - process an ioctl
1436  *      @bdev: target block device
1437  *      @mode: FMODE_* mask
1438  *      @cmd: ioctl command number
1439  *      @arg: this is third argument given to ioctl(2) system call.
1440  *      Often contains a pointer.
1441  *
1442  *      Returns 0 if successful (some ioctls return positive numbers on
1443  *      success as well). Returns a negated errno value in case of error.
1444  *
1445  *      Note: most ioctls are forward onto the block subsystem or further
1446  *      down in the scsi subsystem.
1447  **/
1448 static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1449                     unsigned int cmd, unsigned long arg)
1450 {
1451         struct gendisk *disk = bdev->bd_disk;
1452         struct scsi_disk *sdkp = scsi_disk(disk);
1453         struct scsi_device *sdp = sdkp->device;
1454         void __user *p = (void __user *)arg;
1455         int error;
1456
1457         SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1458                                     "cmd=0x%x\n", disk->disk_name, cmd));
1459
1460         error = scsi_verify_blk_ioctl(bdev, cmd);
1461         if (error < 0)
1462                 return error;
1463
1464         /*
1465          * If we are in the middle of error recovery, don't let anyone
1466          * else try and use this device.  Also, if error recovery fails, it
1467          * may try and take the device offline, in which case all further
1468          * access to the device is prohibited.
1469          */
1470         error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
1471                         (mode & FMODE_NDELAY) != 0);
1472         if (error)
1473                 goto out;
1474
1475         if (is_sed_ioctl(cmd))
1476                 return sed_ioctl(sdkp->opal_dev, cmd, p);
1477
1478         /*
1479          * Send SCSI addressing ioctls directly to mid level, send other
1480          * ioctls to block level and then onto mid level if they can't be
1481          * resolved.
1482          */
1483         switch (cmd) {
1484                 case SCSI_IOCTL_GET_IDLUN:
1485                 case SCSI_IOCTL_GET_BUS_NUMBER:
1486                         error = scsi_ioctl(sdp, cmd, p);
1487                         break;
1488                 default:
1489                         error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
1490                         if (error != -ENOTTY)
1491                                 break;
1492                         error = scsi_ioctl(sdp, cmd, p);
1493                         break;
1494         }
1495 out:
1496         return error;
1497 }
1498
1499 static void set_media_not_present(struct scsi_disk *sdkp)
1500 {
1501         if (sdkp->media_present)
1502                 sdkp->device->changed = 1;
1503
1504         if (sdkp->device->removable) {
1505                 sdkp->media_present = 0;
1506                 sdkp->capacity = 0;
1507         }
1508 }
1509
1510 static int media_not_present(struct scsi_disk *sdkp,
1511                              struct scsi_sense_hdr *sshdr)
1512 {
1513         if (!scsi_sense_valid(sshdr))
1514                 return 0;
1515
1516         /* not invoked for commands that could return deferred errors */
1517         switch (sshdr->sense_key) {
1518         case UNIT_ATTENTION:
1519         case NOT_READY:
1520                 /* medium not present */
1521                 if (sshdr->asc == 0x3A) {
1522                         set_media_not_present(sdkp);
1523                         return 1;
1524                 }
1525         }
1526         return 0;
1527 }
1528
1529 /**
1530  *      sd_check_events - check media events
1531  *      @disk: kernel device descriptor
1532  *      @clearing: disk events currently being cleared
1533  *
1534  *      Returns mask of DISK_EVENT_*.
1535  *
1536  *      Note: this function is invoked from the block subsystem.
1537  **/
1538 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1539 {
1540         struct scsi_disk *sdkp = scsi_disk_get(disk);
1541         struct scsi_device *sdp;
1542         int retval;
1543
1544         if (!sdkp)
1545                 return 0;
1546
1547         sdp = sdkp->device;
1548         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1549
1550         /*
1551          * If the device is offline, don't send any commands - just pretend as
1552          * if the command failed.  If the device ever comes back online, we
1553          * can deal with it then.  It is only because of unrecoverable errors
1554          * that we would ever take a device offline in the first place.
1555          */
1556         if (!scsi_device_online(sdp)) {
1557                 set_media_not_present(sdkp);
1558                 goto out;
1559         }
1560
1561         /*
1562          * Using TEST_UNIT_READY enables differentiation between drive with
1563          * no cartridge loaded - NOT READY, drive with changed cartridge -
1564          * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1565          *
1566          * Drives that auto spin down. eg iomega jaz 1G, will be started
1567          * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1568          * sd_revalidate() is called.
1569          */
1570         if (scsi_block_when_processing_errors(sdp)) {
1571                 struct scsi_sense_hdr sshdr = { 0, };
1572
1573                 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1574                                               &sshdr);
1575
1576                 /* failed to execute TUR, assume media not present */
1577                 if (host_byte(retval)) {
1578                         set_media_not_present(sdkp);
1579                         goto out;
1580                 }
1581
1582                 if (media_not_present(sdkp, &sshdr))
1583                         goto out;
1584         }
1585
1586         /*
1587          * For removable scsi disk we have to recognise the presence
1588          * of a disk in the drive.
1589          */
1590         if (!sdkp->media_present)
1591                 sdp->changed = 1;
1592         sdkp->media_present = 1;
1593 out:
1594         /*
1595          * sdp->changed is set under the following conditions:
1596          *
1597          *      Medium present state has changed in either direction.
1598          *      Device has indicated UNIT_ATTENTION.
1599          */
1600         retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1601         sdp->changed = 0;
1602         scsi_disk_put(sdkp);
1603         return retval;
1604 }
1605
1606 static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
1607 {
1608         int retries, res;
1609         struct scsi_device *sdp = sdkp->device;
1610         const int timeout = sdp->request_queue->rq_timeout
1611                 * SD_FLUSH_TIMEOUT_MULTIPLIER;
1612         struct scsi_sense_hdr my_sshdr;
1613
1614         if (!scsi_device_online(sdp))
1615                 return -ENODEV;
1616
1617         /* caller might not be interested in sense, but we need it */
1618         if (!sshdr)
1619                 sshdr = &my_sshdr;
1620
1621         for (retries = 3; retries > 0; --retries) {
1622                 unsigned char cmd[10] = { 0 };
1623
1624                 cmd[0] = SYNCHRONIZE_CACHE;
1625                 /*
1626                  * Leave the rest of the command zero to indicate
1627                  * flush everything.
1628                  */
1629                 res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, sshdr,
1630                                 timeout, SD_MAX_RETRIES, 0, RQF_PM, NULL);
1631                 if (res == 0)
1632                         break;
1633         }
1634
1635         if (res) {
1636                 sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
1637
1638                 if (driver_byte(res) & DRIVER_SENSE)
1639                         sd_print_sense_hdr(sdkp, sshdr);
1640
1641                 /* we need to evaluate the error return  */
1642                 if (scsi_sense_valid(sshdr) &&
1643                         (sshdr->asc == 0x3a ||  /* medium not present */
1644                          sshdr->asc == 0x20))   /* invalid command */
1645                                 /* this is no error here */
1646                                 return 0;
1647
1648                 switch (host_byte(res)) {
1649                 /* ignore errors due to racing a disconnection */
1650                 case DID_BAD_TARGET:
1651                 case DID_NO_CONNECT:
1652                         return 0;
1653                 /* signal the upper layer it might try again */
1654                 case DID_BUS_BUSY:
1655                 case DID_IMM_RETRY:
1656                 case DID_REQUEUE:
1657                 case DID_SOFT_ERROR:
1658                         return -EBUSY;
1659                 default:
1660                         return -EIO;
1661                 }
1662         }
1663         return 0;
1664 }
1665
1666 static void sd_rescan(struct device *dev)
1667 {
1668         struct scsi_disk *sdkp = dev_get_drvdata(dev);
1669
1670         revalidate_disk(sdkp->disk);
1671 }
1672
1673
1674 #ifdef CONFIG_COMPAT
1675 /*
1676  * This gets directly called from VFS. When the ioctl
1677  * is not recognized we go back to the other translation paths.
1678  */
1679 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1680                            unsigned int cmd, unsigned long arg)
1681 {
1682         struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1683         int error;
1684
1685         error = scsi_ioctl_block_when_processing_errors(sdev, cmd,
1686                         (mode & FMODE_NDELAY) != 0);
1687         if (error)
1688                 return error;
1689
1690         /*
1691          * Let the static ioctl translation table take care of it.
1692          */
1693         if (!sdev->host->hostt->compat_ioctl)
1694                 return -ENOIOCTLCMD;
1695         return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1696 }
1697 #endif
1698
1699 static char sd_pr_type(enum pr_type type)
1700 {
1701         switch (type) {
1702         case PR_WRITE_EXCLUSIVE:
1703                 return 0x01;
1704         case PR_EXCLUSIVE_ACCESS:
1705                 return 0x03;
1706         case PR_WRITE_EXCLUSIVE_REG_ONLY:
1707                 return 0x05;
1708         case PR_EXCLUSIVE_ACCESS_REG_ONLY:
1709                 return 0x06;
1710         case PR_WRITE_EXCLUSIVE_ALL_REGS:
1711                 return 0x07;
1712         case PR_EXCLUSIVE_ACCESS_ALL_REGS:
1713                 return 0x08;
1714         default:
1715                 return 0;
1716         }
1717 };
1718
1719 static int sd_pr_command(struct block_device *bdev, u8 sa,
1720                 u64 key, u64 sa_key, u8 type, u8 flags)
1721 {
1722         struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1723         struct scsi_sense_hdr sshdr;
1724         int result;
1725         u8 cmd[16] = { 0, };
1726         u8 data[24] = { 0, };
1727
1728         cmd[0] = PERSISTENT_RESERVE_OUT;
1729         cmd[1] = sa;
1730         cmd[2] = type;
1731         put_unaligned_be32(sizeof(data), &cmd[5]);
1732
1733         put_unaligned_be64(key, &data[0]);
1734         put_unaligned_be64(sa_key, &data[8]);
1735         data[20] = flags;
1736
1737         result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
1738                         &sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1739
1740         if ((driver_byte(result) & DRIVER_SENSE) &&
1741             (scsi_sense_valid(&sshdr))) {
1742                 sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
1743                 scsi_print_sense_hdr(sdev, NULL, &sshdr);
1744         }
1745
1746         return result;
1747 }
1748
1749 static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
1750                 u32 flags)
1751 {
1752         if (flags & ~PR_FL_IGNORE_KEY)
1753                 return -EOPNOTSUPP;
1754         return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
1755                         old_key, new_key, 0,
1756                         (1 << 0) /* APTPL */);
1757 }
1758
1759 static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
1760                 u32 flags)
1761 {
1762         if (flags)
1763                 return -EOPNOTSUPP;
1764         return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
1765 }
1766
1767 static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
1768 {
1769         return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
1770 }
1771
1772 static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
1773                 enum pr_type type, bool abort)
1774 {
1775         return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
1776                              sd_pr_type(type), 0);
1777 }
1778
1779 static int sd_pr_clear(struct block_device *bdev, u64 key)
1780 {
1781         return sd_pr_command(bdev, 0x03, key, 0, 0, 0);
1782 }
1783
1784 static const struct pr_ops sd_pr_ops = {
1785         .pr_register    = sd_pr_register,
1786         .pr_reserve     = sd_pr_reserve,
1787         .pr_release     = sd_pr_release,
1788         .pr_preempt     = sd_pr_preempt,
1789         .pr_clear       = sd_pr_clear,
1790 };
1791
1792 static const struct block_device_operations sd_fops = {
1793         .owner                  = THIS_MODULE,
1794         .open                   = sd_open,
1795         .release                = sd_release,
1796         .ioctl                  = sd_ioctl,
1797         .getgeo                 = sd_getgeo,
1798 #ifdef CONFIG_COMPAT
1799         .compat_ioctl           = sd_compat_ioctl,
1800 #endif
1801         .check_events           = sd_check_events,
1802         .revalidate_disk        = sd_revalidate_disk,
1803         .unlock_native_capacity = sd_unlock_native_capacity,
1804         .pr_ops                 = &sd_pr_ops,
1805 };
1806
1807 /**
1808  *      sd_eh_reset - reset error handling callback
1809  *      @scmd:          sd-issued command that has failed
1810  *
1811  *      This function is called by the SCSI midlayer before starting
1812  *      SCSI EH. When counting medium access failures we have to be
1813  *      careful to register it only only once per device and SCSI EH run;
1814  *      there might be several timed out commands which will cause the
1815  *      'max_medium_access_timeouts' counter to trigger after the first
1816  *      SCSI EH run already and set the device to offline.
1817  *      So this function resets the internal counter before starting SCSI EH.
1818  **/
1819 static void sd_eh_reset(struct scsi_cmnd *scmd)
1820 {
1821         struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1822
1823         /* New SCSI EH run, reset gate variable */
1824         sdkp->ignore_medium_access_errors = false;
1825 }
1826
1827 /**
1828  *      sd_eh_action - error handling callback
1829  *      @scmd:          sd-issued command that has failed
1830  *      @eh_disp:       The recovery disposition suggested by the midlayer
1831  *
1832  *      This function is called by the SCSI midlayer upon completion of an
1833  *      error test command (currently TEST UNIT READY). The result of sending
1834  *      the eh command is passed in eh_disp.  We're looking for devices that
1835  *      fail medium access commands but are OK with non access commands like
1836  *      test unit ready (so wrongly see the device as having a successful
1837  *      recovery)
1838  **/
1839 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
1840 {
1841         struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1842         struct scsi_device *sdev = scmd->device;
1843
1844         if (!scsi_device_online(sdev) ||
1845             !scsi_medium_access_command(scmd) ||
1846             host_byte(scmd->result) != DID_TIME_OUT ||
1847             eh_disp != SUCCESS)
1848                 return eh_disp;
1849
1850         /*
1851          * The device has timed out executing a medium access command.
1852          * However, the TEST UNIT READY command sent during error
1853          * handling completed successfully. Either the device is in the
1854          * process of recovering or has it suffered an internal failure
1855          * that prevents access to the storage medium.
1856          */
1857         if (!sdkp->ignore_medium_access_errors) {
1858                 sdkp->medium_access_timed_out++;
1859                 sdkp->ignore_medium_access_errors = true;
1860         }
1861
1862         /*
1863          * If the device keeps failing read/write commands but TEST UNIT
1864          * READY always completes successfully we assume that medium
1865          * access is no longer possible and take the device offline.
1866          */
1867         if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
1868                 scmd_printk(KERN_ERR, scmd,
1869                             "Medium access timeout failure. Offlining disk!\n");
1870                 mutex_lock(&sdev->state_mutex);
1871                 scsi_device_set_state(sdev, SDEV_OFFLINE);
1872                 mutex_unlock(&sdev->state_mutex);
1873
1874                 return SUCCESS;
1875         }
1876
1877         return eh_disp;
1878 }
1879
1880 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1881 {
1882         struct request *req = scmd->request;
1883         struct scsi_device *sdev = scmd->device;
1884         unsigned int transferred, good_bytes;
1885         u64 start_lba, end_lba, bad_lba;
1886
1887         /*
1888          * Some commands have a payload smaller than the device logical
1889          * block size (e.g. INQUIRY on a 4K disk).
1890          */
1891         if (scsi_bufflen(scmd) <= sdev->sector_size)
1892                 return 0;
1893
1894         /* Check if we have a 'bad_lba' information */
1895         if (!scsi_get_sense_info_fld(scmd->sense_buffer,
1896                                      SCSI_SENSE_BUFFERSIZE,
1897                                      &bad_lba))
1898                 return 0;
1899
1900         /*
1901          * If the bad lba was reported incorrectly, we have no idea where
1902          * the error is.
1903          */
1904         start_lba = sectors_to_logical(sdev, blk_rq_pos(req));
1905         end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd));
1906         if (bad_lba < start_lba || bad_lba >= end_lba)
1907                 return 0;
1908
1909         /*
1910          * resid is optional but mostly filled in.  When it's unused,
1911          * its value is zero, so we assume the whole buffer transferred
1912          */
1913         transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1914
1915         /* This computation should always be done in terms of the
1916          * resolution of the device's medium.
1917          */
1918         good_bytes = logical_to_bytes(sdev, bad_lba - start_lba);
1919
1920         return min(good_bytes, transferred);
1921 }
1922
1923 /**
1924  *      sd_done - bottom half handler: called when the lower level
1925  *      driver has completed (successfully or otherwise) a scsi command.
1926  *      @SCpnt: mid-level's per command structure.
1927  *
1928  *      Note: potentially run from within an ISR. Must not block.
1929  **/
1930 static int sd_done(struct scsi_cmnd *SCpnt)
1931 {
1932         int result = SCpnt->result;
1933         unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1934         unsigned int sector_size = SCpnt->device->sector_size;
1935         unsigned int resid;
1936         struct scsi_sense_hdr sshdr;
1937         struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1938         struct request *req = SCpnt->request;
1939         int sense_valid = 0;
1940         int sense_deferred = 0;
1941
1942         switch (req_op(req)) {
1943         case REQ_OP_DISCARD:
1944         case REQ_OP_WRITE_ZEROES:
1945         case REQ_OP_WRITE_SAME:
1946         case REQ_OP_ZONE_RESET:
1947                 if (!result) {
1948                         good_bytes = blk_rq_bytes(req);
1949                         scsi_set_resid(SCpnt, 0);
1950                 } else {
1951                         good_bytes = 0;
1952                         scsi_set_resid(SCpnt, blk_rq_bytes(req));
1953                 }
1954                 break;
1955         case REQ_OP_ZONE_REPORT:
1956                 if (!result) {
1957                         good_bytes = scsi_bufflen(SCpnt)
1958                                 - scsi_get_resid(SCpnt);
1959                         scsi_set_resid(SCpnt, 0);
1960                 } else {
1961                         good_bytes = 0;
1962                         scsi_set_resid(SCpnt, blk_rq_bytes(req));
1963                 }
1964                 break;
1965         default:
1966                 /*
1967                  * In case of bogus fw or device, we could end up having
1968                  * an unaligned partial completion. Check this here and force
1969                  * alignment.
1970                  */
1971                 resid = scsi_get_resid(SCpnt);
1972                 if (resid & (sector_size - 1)) {
1973                         sd_printk(KERN_INFO, sdkp,
1974                                 "Unaligned partial completion (resid=%u, sector_sz=%u)\n",
1975                                 resid, sector_size);
1976                         resid = min(scsi_bufflen(SCpnt),
1977                                     round_up(resid, sector_size));
1978                         scsi_set_resid(SCpnt, resid);
1979                 }
1980         }
1981
1982         if (result) {
1983                 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1984                 if (sense_valid)
1985                         sense_deferred = scsi_sense_is_deferred(&sshdr);
1986         }
1987         sdkp->medium_access_timed_out = 0;
1988
1989         if (driver_byte(result) != DRIVER_SENSE &&
1990             (!sense_valid || sense_deferred))
1991                 goto out;
1992
1993         switch (sshdr.sense_key) {
1994         case HARDWARE_ERROR:
1995         case MEDIUM_ERROR:
1996                 good_bytes = sd_completed_bytes(SCpnt);
1997                 break;
1998         case RECOVERED_ERROR:
1999                 good_bytes = scsi_bufflen(SCpnt);
2000                 break;
2001         case NO_SENSE:
2002                 /* This indicates a false check condition, so ignore it.  An
2003                  * unknown amount of data was transferred so treat it as an
2004                  * error.
2005                  */
2006                 SCpnt->result = 0;
2007                 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2008                 break;
2009         case ABORTED_COMMAND:
2010                 if (sshdr.asc == 0x10)  /* DIF: Target detected corruption */
2011                         good_bytes = sd_completed_bytes(SCpnt);
2012                 break;
2013         case ILLEGAL_REQUEST:
2014                 switch (sshdr.asc) {
2015                 case 0x10:      /* DIX: Host detected corruption */
2016                         good_bytes = sd_completed_bytes(SCpnt);
2017                         break;
2018                 case 0x20:      /* INVALID COMMAND OPCODE */
2019                 case 0x24:      /* INVALID FIELD IN CDB */
2020                         switch (SCpnt->cmnd[0]) {
2021                         case UNMAP:
2022                                 sd_config_discard(sdkp, SD_LBP_DISABLE);
2023                                 break;
2024                         case WRITE_SAME_16:
2025                         case WRITE_SAME:
2026                                 if (SCpnt->cmnd[1] & 8) { /* UNMAP */
2027                                         sd_config_discard(sdkp, SD_LBP_DISABLE);
2028                                 } else {
2029                                         sdkp->device->no_write_same = 1;
2030                                         sd_config_write_same(sdkp);
2031                                         req->__data_len = blk_rq_bytes(req);
2032                                         req->rq_flags |= RQF_QUIET;
2033                                 }
2034                                 break;
2035                         }
2036                 }
2037                 break;
2038         default:
2039                 break;
2040         }
2041
2042  out:
2043         if (sd_is_zoned(sdkp))
2044                 sd_zbc_complete(SCpnt, good_bytes, &sshdr);
2045
2046         SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
2047                                            "sd_done: completed %d of %d bytes\n",
2048                                            good_bytes, scsi_bufflen(SCpnt)));
2049
2050         if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
2051                 sd_dif_complete(SCpnt, good_bytes);
2052
2053         return good_bytes;
2054 }
2055
2056 /*
2057  * spinup disk - called only in sd_revalidate_disk()
2058  */
2059 static void
2060 sd_spinup_disk(struct scsi_disk *sdkp)
2061 {
2062         unsigned char cmd[10];
2063         unsigned long spintime_expire = 0;
2064         int retries, spintime;
2065         unsigned int the_result;
2066         struct scsi_sense_hdr sshdr;
2067         int sense_valid = 0;
2068
2069         spintime = 0;
2070
2071         /* Spin up drives, as required.  Only do this at boot time */
2072         /* Spinup needs to be done for module loads too. */
2073         do {
2074                 retries = 0;
2075
2076                 do {
2077                         cmd[0] = TEST_UNIT_READY;
2078                         memset((void *) &cmd[1], 0, 9);
2079
2080                         the_result = scsi_execute_req(sdkp->device, cmd,
2081                                                       DMA_NONE, NULL, 0,
2082                                                       &sshdr, SD_TIMEOUT,
2083                                                       SD_MAX_RETRIES, NULL);
2084
2085                         /*
2086                          * If the drive has indicated to us that it
2087                          * doesn't have any media in it, don't bother
2088                          * with any more polling.
2089                          */
2090                         if (media_not_present(sdkp, &sshdr))
2091                                 return;
2092
2093                         if (the_result)
2094                                 sense_valid = scsi_sense_valid(&sshdr);
2095                         retries++;
2096                 } while (retries < 3 &&
2097                          (!scsi_status_is_good(the_result) ||
2098                           ((driver_byte(the_result) & DRIVER_SENSE) &&
2099                           sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
2100
2101                 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
2102                         /* no sense, TUR either succeeded or failed
2103                          * with a status error */
2104                         if(!spintime && !scsi_status_is_good(the_result)) {
2105                                 sd_print_result(sdkp, "Test Unit Ready failed",
2106                                                 the_result);
2107                         }
2108                         break;
2109                 }
2110
2111                 /*
2112                  * The device does not want the automatic start to be issued.
2113                  */
2114                 if (sdkp->device->no_start_on_add)
2115                         break;
2116
2117                 if (sense_valid && sshdr.sense_key == NOT_READY) {
2118                         if (sshdr.asc == 4 && sshdr.ascq == 3)
2119                                 break;  /* manual intervention required */
2120                         if (sshdr.asc == 4 && sshdr.ascq == 0xb)
2121                                 break;  /* standby */
2122                         if (sshdr.asc == 4 && sshdr.ascq == 0xc)
2123                                 break;  /* unavailable */
2124                         if (sshdr.asc == 4 && sshdr.ascq == 0x1b)
2125                                 break;  /* sanitize in progress */
2126                         /*
2127                          * Issue command to spin up drive when not ready
2128                          */
2129                         if (!spintime) {
2130                                 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
2131                                 cmd[0] = START_STOP;
2132                                 cmd[1] = 1;     /* Return immediately */
2133                                 memset((void *) &cmd[2], 0, 8);
2134                                 cmd[4] = 1;     /* Start spin cycle */
2135                                 if (sdkp->device->start_stop_pwr_cond)
2136                                         cmd[4] |= 1 << 4;
2137                                 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
2138                                                  NULL, 0, &sshdr,
2139                                                  SD_TIMEOUT, SD_MAX_RETRIES,
2140                                                  NULL);
2141                                 spintime_expire = jiffies + 100 * HZ;
2142                                 spintime = 1;
2143                         }
2144                         /* Wait 1 second for next try */
2145                         msleep(1000);
2146                         printk(KERN_CONT ".");
2147
2148                 /*
2149                  * Wait for USB flash devices with slow firmware.
2150                  * Yes, this sense key/ASC combination shouldn't
2151                  * occur here.  It's characteristic of these devices.
2152                  */
2153                 } else if (sense_valid &&
2154                                 sshdr.sense_key == UNIT_ATTENTION &&
2155                                 sshdr.asc == 0x28) {
2156                         if (!spintime) {
2157                                 spintime_expire = jiffies + 5 * HZ;
2158                                 spintime = 1;
2159                         }
2160                         /* Wait 1 second for next try */
2161                         msleep(1000);
2162                 } else {
2163                         /* we don't understand the sense code, so it's
2164                          * probably pointless to loop */
2165                         if(!spintime) {
2166                                 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
2167                                 sd_print_sense_hdr(sdkp, &sshdr);
2168                         }
2169                         break;
2170                 }
2171
2172         } while (spintime && time_before_eq(jiffies, spintime_expire));
2173
2174         if (spintime) {
2175                 if (scsi_status_is_good(the_result))
2176                         printk(KERN_CONT "ready\n");
2177                 else
2178                         printk(KERN_CONT "not responding...\n");
2179         }
2180 }
2181
2182 /*
2183  * Determine whether disk supports Data Integrity Field.
2184  */
2185 static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
2186 {
2187         struct scsi_device *sdp = sdkp->device;
2188         u8 type;
2189         int ret = 0;
2190
2191         if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
2192                 return ret;
2193
2194         type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
2195
2196         if (type > T10_PI_TYPE3_PROTECTION)
2197                 ret = -ENODEV;
2198         else if (scsi_host_dif_capable(sdp->host, type))
2199                 ret = 1;
2200
2201         if (sdkp->first_scan || type != sdkp->protection_type)
2202                 switch (ret) {
2203                 case -ENODEV:
2204                         sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
2205                                   " protection type %u. Disabling disk!\n",
2206                                   type);
2207                         break;
2208                 case 1:
2209                         sd_printk(KERN_NOTICE, sdkp,
2210                                   "Enabling DIF Type %u protection\n", type);
2211                         break;
2212                 case 0:
2213                         sd_printk(KERN_NOTICE, sdkp,
2214                                   "Disabling DIF Type %u protection\n", type);
2215                         break;
2216                 }
2217
2218         sdkp->protection_type = type;
2219
2220         return ret;
2221 }
2222
2223 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
2224                         struct scsi_sense_hdr *sshdr, int sense_valid,
2225                         int the_result)
2226 {
2227         if (driver_byte(the_result) & DRIVER_SENSE)
2228                 sd_print_sense_hdr(sdkp, sshdr);
2229         else
2230                 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
2231
2232         /*
2233          * Set dirty bit for removable devices if not ready -
2234          * sometimes drives will not report this properly.
2235          */
2236         if (sdp->removable &&
2237             sense_valid && sshdr->sense_key == NOT_READY)
2238                 set_media_not_present(sdkp);
2239
2240         /*
2241          * We used to set media_present to 0 here to indicate no media
2242          * in the drive, but some drives fail read capacity even with
2243          * media present, so we can't do that.
2244          */
2245         sdkp->capacity = 0; /* unknown mapped to zero - as usual */
2246 }
2247
2248 #define RC16_LEN 32
2249 #if RC16_LEN > SD_BUF_SIZE
2250 #error RC16_LEN must not be more than SD_BUF_SIZE
2251 #endif
2252
2253 #define READ_CAPACITY_RETRIES_ON_RESET  10
2254
2255 /*
2256  * Ensure that we don't overflow sector_t when CONFIG_LBDAF is not set
2257  * and the reported logical block size is bigger than 512 bytes. Note
2258  * that last_sector is a u64 and therefore logical_to_sectors() is not
2259  * applicable.
2260  */
2261 static bool sd_addressable_capacity(u64 lba, unsigned int sector_size)
2262 {
2263         u64 last_sector = (lba + 1ULL) << (ilog2(sector_size) - 9);
2264
2265         if (sizeof(sector_t) == 4 && last_sector > U32_MAX)
2266                 return false;
2267
2268         return true;
2269 }
2270
2271 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
2272                                                 unsigned char *buffer)
2273 {
2274         unsigned char cmd[16];
2275         struct scsi_sense_hdr sshdr;
2276         int sense_valid = 0;
2277         int the_result;
2278         int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2279         unsigned int alignment;
2280         unsigned long long lba;
2281         unsigned sector_size;
2282
2283         if (sdp->no_read_capacity_16)
2284                 return -EINVAL;
2285
2286         do {
2287                 memset(cmd, 0, 16);
2288                 cmd[0] = SERVICE_ACTION_IN_16;
2289                 cmd[1] = SAI_READ_CAPACITY_16;
2290                 cmd[13] = RC16_LEN;
2291                 memset(buffer, 0, RC16_LEN);
2292
2293                 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2294                                         buffer, RC16_LEN, &sshdr,
2295                                         SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2296
2297                 if (media_not_present(sdkp, &sshdr))
2298                         return -ENODEV;
2299
2300                 if (the_result) {
2301                         sense_valid = scsi_sense_valid(&sshdr);
2302                         if (sense_valid &&
2303                             sshdr.sense_key == ILLEGAL_REQUEST &&
2304                             (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
2305                             sshdr.ascq == 0x00)
2306                                 /* Invalid Command Operation Code or
2307                                  * Invalid Field in CDB, just retry
2308                                  * silently with RC10 */
2309                                 return -EINVAL;
2310                         if (sense_valid &&
2311                             sshdr.sense_key == UNIT_ATTENTION &&
2312                             sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2313                                 /* Device reset might occur several times,
2314                                  * give it one more chance */
2315                                 if (--reset_retries > 0)
2316                                         continue;
2317                 }
2318                 retries--;
2319
2320         } while (the_result && retries);
2321
2322         if (the_result) {
2323                 sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
2324                 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2325                 return -EINVAL;
2326         }
2327
2328         sector_size = get_unaligned_be32(&buffer[8]);
2329         lba = get_unaligned_be64(&buffer[0]);
2330
2331         if (sd_read_protection_type(sdkp, buffer) < 0) {
2332                 sdkp->capacity = 0;
2333                 return -ENODEV;
2334         }
2335
2336         if (!sd_addressable_capacity(lba, sector_size)) {
2337                 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2338                         "kernel compiled with support for large block "
2339                         "devices.\n");
2340                 sdkp->capacity = 0;
2341                 return -EOVERFLOW;
2342         }
2343
2344         /* Logical blocks per physical block exponent */
2345         sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
2346
2347         /* RC basis */
2348         sdkp->rc_basis = (buffer[12] >> 4) & 0x3;
2349
2350         /* Lowest aligned logical block */
2351         alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2352         blk_queue_alignment_offset(sdp->request_queue, alignment);
2353         if (alignment && sdkp->first_scan)
2354                 sd_printk(KERN_NOTICE, sdkp,
2355                           "physical block alignment offset: %u\n", alignment);
2356
2357         if (buffer[14] & 0x80) { /* LBPME */
2358                 sdkp->lbpme = 1;
2359
2360                 if (buffer[14] & 0x40) /* LBPRZ */
2361                         sdkp->lbprz = 1;
2362
2363                 sd_config_discard(sdkp, SD_LBP_WS16);
2364         }
2365
2366         sdkp->capacity = lba + 1;
2367         return sector_size;
2368 }
2369
2370 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2371                                                 unsigned char *buffer)
2372 {
2373         unsigned char cmd[16];
2374         struct scsi_sense_hdr sshdr;
2375         int sense_valid = 0;
2376         int the_result;
2377         int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2378         sector_t lba;
2379         unsigned sector_size;
2380
2381         do {
2382                 cmd[0] = READ_CAPACITY;
2383                 memset(&cmd[1], 0, 9);
2384                 memset(buffer, 0, 8);
2385
2386                 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2387                                         buffer, 8, &sshdr,
2388                                         SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2389
2390                 if (media_not_present(sdkp, &sshdr))
2391                         return -ENODEV;
2392
2393                 if (the_result) {
2394                         sense_valid = scsi_sense_valid(&sshdr);
2395                         if (sense_valid &&
2396                             sshdr.sense_key == UNIT_ATTENTION &&
2397                             sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2398                                 /* Device reset might occur several times,
2399                                  * give it one more chance */
2400                                 if (--reset_retries > 0)
2401                                         continue;
2402                 }
2403                 retries--;
2404
2405         } while (the_result && retries);
2406
2407         if (the_result) {
2408                 sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
2409                 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2410                 return -EINVAL;
2411         }
2412
2413         sector_size = get_unaligned_be32(&buffer[4]);
2414         lba = get_unaligned_be32(&buffer[0]);
2415
2416         if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2417                 /* Some buggy (usb cardreader) devices return an lba of
2418                    0xffffffff when the want to report a size of 0 (with
2419                    which they really mean no media is present) */
2420                 sdkp->capacity = 0;
2421                 sdkp->physical_block_size = sector_size;
2422                 return sector_size;
2423         }
2424
2425         if (!sd_addressable_capacity(lba, sector_size)) {
2426                 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2427                         "kernel compiled with support for large block "
2428                         "devices.\n");
2429                 sdkp->capacity = 0;
2430                 return -EOVERFLOW;
2431         }
2432
2433         sdkp->capacity = lba + 1;
2434         sdkp->physical_block_size = sector_size;
2435         return sector_size;
2436 }
2437
2438 static int sd_try_rc16_first(struct scsi_device *sdp)
2439 {
2440         if (sdp->host->max_cmd_len < 16)
2441                 return 0;
2442         if (sdp->try_rc_10_first)
2443                 return 0;
2444         if (sdp->scsi_level > SCSI_SPC_2)
2445                 return 1;
2446         if (scsi_device_protection(sdp))
2447                 return 1;
2448         return 0;
2449 }
2450
2451 /*
2452  * read disk capacity
2453  */
2454 static void
2455 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
2456 {
2457         int sector_size;
2458         struct scsi_device *sdp = sdkp->device;
2459
2460         if (sd_try_rc16_first(sdp)) {
2461                 sector_size = read_capacity_16(sdkp, sdp, buffer);
2462                 if (sector_size == -EOVERFLOW)
2463                         goto got_data;
2464                 if (sector_size == -ENODEV)
2465                         return;
2466                 if (sector_size < 0)
2467                         sector_size = read_capacity_10(sdkp, sdp, buffer);
2468                 if (sector_size < 0)
2469                         return;
2470         } else {
2471                 sector_size = read_capacity_10(sdkp, sdp, buffer);
2472                 if (sector_size == -EOVERFLOW)
2473                         goto got_data;
2474                 if (sector_size < 0)
2475                         return;
2476                 if ((sizeof(sdkp->capacity) > 4) &&
2477                     (sdkp->capacity > 0xffffffffULL)) {
2478                         int old_sector_size = sector_size;
2479                         sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2480                                         "Trying to use READ CAPACITY(16).\n");
2481                         sector_size = read_capacity_16(sdkp, sdp, buffer);
2482                         if (sector_size < 0) {
2483                                 sd_printk(KERN_NOTICE, sdkp,
2484                                         "Using 0xffffffff as device size\n");
2485                                 sdkp->capacity = 1 + (sector_t) 0xffffffff;
2486                                 sector_size = old_sector_size;
2487                                 goto got_data;
2488                         }
2489                         /* Remember that READ CAPACITY(16) succeeded */
2490                         sdp->try_rc_10_first = 0;
2491                 }
2492         }
2493
2494         /* Some devices are known to return the total number of blocks,
2495          * not the highest block number.  Some devices have versions
2496          * which do this and others which do not.  Some devices we might
2497          * suspect of doing this but we don't know for certain.
2498          *
2499          * If we know the reported capacity is wrong, decrement it.  If
2500          * we can only guess, then assume the number of blocks is even
2501          * (usually true but not always) and err on the side of lowering
2502          * the capacity.
2503          */
2504         if (sdp->fix_capacity ||
2505             (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2506                 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2507                                 "from its reported value: %llu\n",
2508                                 (unsigned long long) sdkp->capacity);
2509                 --sdkp->capacity;
2510         }
2511
2512 got_data:
2513         if (sector_size == 0) {
2514                 sector_size = 512;
2515                 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2516                           "assuming 512.\n");
2517         }
2518
2519         if (sector_size != 512 &&
2520             sector_size != 1024 &&
2521             sector_size != 2048 &&
2522             sector_size != 4096) {
2523                 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2524                           sector_size);
2525                 /*
2526                  * The user might want to re-format the drive with
2527                  * a supported sectorsize.  Once this happens, it
2528                  * would be relatively trivial to set the thing up.
2529                  * For this reason, we leave the thing in the table.
2530                  */
2531                 sdkp->capacity = 0;
2532                 /*
2533                  * set a bogus sector size so the normal read/write
2534                  * logic in the block layer will eventually refuse any
2535                  * request on this device without tripping over power
2536                  * of two sector size assumptions
2537                  */
2538                 sector_size = 512;
2539         }
2540         blk_queue_logical_block_size(sdp->request_queue, sector_size);
2541         blk_queue_physical_block_size(sdp->request_queue,
2542                                       sdkp->physical_block_size);
2543         sdkp->device->sector_size = sector_size;
2544
2545         if (sdkp->capacity > 0xffffffff)
2546                 sdp->use_16_for_rw = 1;
2547
2548 }
2549
2550 /*
2551  * Print disk capacity
2552  */
2553 static void
2554 sd_print_capacity(struct scsi_disk *sdkp,
2555                   sector_t old_capacity)
2556 {
2557         int sector_size = sdkp->device->sector_size;
2558         char cap_str_2[10], cap_str_10[10];
2559
2560         string_get_size(sdkp->capacity, sector_size,
2561                         STRING_UNITS_2, cap_str_2, sizeof(cap_str_2));
2562         string_get_size(sdkp->capacity, sector_size,
2563                         STRING_UNITS_10, cap_str_10,
2564                         sizeof(cap_str_10));
2565
2566         if (sdkp->first_scan || old_capacity != sdkp->capacity) {
2567                 sd_printk(KERN_NOTICE, sdkp,
2568                           "%llu %d-byte logical blocks: (%s/%s)\n",
2569                           (unsigned long long)sdkp->capacity,
2570                           sector_size, cap_str_10, cap_str_2);
2571
2572                 if (sdkp->physical_block_size != sector_size)
2573                         sd_printk(KERN_NOTICE, sdkp,
2574                                   "%u-byte physical blocks\n",
2575                                   sdkp->physical_block_size);
2576
2577                 sd_zbc_print_zones(sdkp);
2578         }
2579 }
2580
2581 /* called with buffer of length 512 */
2582 static inline int
2583 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
2584                  unsigned char *buffer, int len, struct scsi_mode_data *data,
2585                  struct scsi_sense_hdr *sshdr)
2586 {
2587         return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
2588                                SD_TIMEOUT, SD_MAX_RETRIES, data,
2589                                sshdr);
2590 }
2591
2592 /*
2593  * read write protect setting, if possible - called only in sd_revalidate_disk()
2594  * called with buffer of length SD_BUF_SIZE
2595  */
2596 static void
2597 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2598 {
2599         int res;
2600         struct scsi_device *sdp = sdkp->device;
2601         struct scsi_mode_data data;
2602         int disk_ro = get_disk_ro(sdkp->disk);
2603         int old_wp = sdkp->write_prot;
2604
2605         set_disk_ro(sdkp->disk, 0);
2606         if (sdp->skip_ms_page_3f) {
2607                 sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2608                 return;
2609         }
2610
2611         if (sdp->use_192_bytes_for_3f) {
2612                 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
2613         } else {
2614                 /*
2615                  * First attempt: ask for all pages (0x3F), but only 4 bytes.
2616                  * We have to start carefully: some devices hang if we ask
2617                  * for more than is available.
2618                  */
2619                 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
2620
2621                 /*
2622                  * Second attempt: ask for page 0 When only page 0 is
2623                  * implemented, a request for page 3F may return Sense Key
2624                  * 5: Illegal Request, Sense Code 24: Invalid field in
2625                  * CDB.
2626                  */
2627                 if (!scsi_status_is_good(res))
2628                         res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
2629
2630                 /*
2631                  * Third attempt: ask 255 bytes, as we did earlier.
2632                  */
2633                 if (!scsi_status_is_good(res))
2634                         res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
2635                                                &data, NULL);
2636         }
2637
2638         if (!scsi_status_is_good(res)) {
2639                 sd_first_printk(KERN_WARNING, sdkp,
2640                           "Test WP failed, assume Write Enabled\n");
2641         } else {
2642                 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2643                 set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro);
2644                 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2645                         sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2646                                   sdkp->write_prot ? "on" : "off");
2647                         sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer);
2648                 }
2649         }
2650 }
2651
2652 /*
2653  * sd_read_cache_type - called only from sd_revalidate_disk()
2654  * called with buffer of length SD_BUF_SIZE
2655  */
2656 static void
2657 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2658 {
2659         int len = 0, res;
2660         struct scsi_device *sdp = sdkp->device;
2661
2662         int dbd;
2663         int modepage;
2664         int first_len;
2665         struct scsi_mode_data data;
2666         struct scsi_sense_hdr sshdr;
2667         int old_wce = sdkp->WCE;
2668         int old_rcd = sdkp->RCD;
2669         int old_dpofua = sdkp->DPOFUA;
2670
2671
2672         if (sdkp->cache_override)
2673                 return;
2674
2675         first_len = 4;
2676         if (sdp->skip_ms_page_8) {
2677                 if (sdp->type == TYPE_RBC)
2678                         goto defaults;
2679                 else {
2680                         if (sdp->skip_ms_page_3f)
2681                                 goto defaults;
2682                         modepage = 0x3F;
2683                         if (sdp->use_192_bytes_for_3f)
2684                                 first_len = 192;
2685                         dbd = 0;
2686                 }
2687         } else if (sdp->type == TYPE_RBC) {
2688                 modepage = 6;
2689                 dbd = 8;
2690         } else {
2691                 modepage = 8;
2692                 dbd = 0;
2693         }
2694
2695         /* cautiously ask */
2696         res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2697                         &data, &sshdr);
2698
2699         if (!scsi_status_is_good(res))
2700                 goto bad_sense;
2701
2702         if (!data.header_length) {
2703                 modepage = 6;
2704                 first_len = 0;
2705                 sd_first_printk(KERN_ERR, sdkp,
2706                                 "Missing header in MODE_SENSE response\n");
2707         }
2708
2709         /* that went OK, now ask for the proper length */
2710         len = data.length;
2711
2712         /*
2713          * We're only interested in the first three bytes, actually.
2714          * But the data cache page is defined for the first 20.
2715          */
2716         if (len < 3)
2717                 goto bad_sense;
2718         else if (len > SD_BUF_SIZE) {
2719                 sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2720                           "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2721                 len = SD_BUF_SIZE;
2722         }
2723         if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2724                 len = 192;
2725
2726         /* Get the data */
2727         if (len > first_len)
2728                 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2729                                 &data, &sshdr);
2730
2731         if (scsi_status_is_good(res)) {
2732                 int offset = data.header_length + data.block_descriptor_length;
2733
2734                 while (offset < len) {
2735                         u8 page_code = buffer[offset] & 0x3F;
2736                         u8 spf       = buffer[offset] & 0x40;
2737
2738                         if (page_code == 8 || page_code == 6) {
2739                                 /* We're interested only in the first 3 bytes.
2740                                  */
2741                                 if (len - offset <= 2) {
2742                                         sd_first_printk(KERN_ERR, sdkp,
2743                                                 "Incomplete mode parameter "
2744                                                         "data\n");
2745                                         goto defaults;
2746                                 } else {
2747                                         modepage = page_code;
2748                                         goto Page_found;
2749                                 }
2750                         } else {
2751                                 /* Go to the next page */
2752                                 if (spf && len - offset > 3)
2753                                         offset += 4 + (buffer[offset+2] << 8) +
2754                                                 buffer[offset+3];
2755                                 else if (!spf && len - offset > 1)
2756                                         offset += 2 + buffer[offset+1];
2757                                 else {
2758                                         sd_first_printk(KERN_ERR, sdkp,
2759                                                         "Incomplete mode "
2760                                                         "parameter data\n");
2761                                         goto defaults;
2762                                 }
2763                         }
2764                 }
2765
2766                 sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n");
2767                 goto defaults;
2768
2769         Page_found:
2770                 if (modepage == 8) {
2771                         sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2772                         sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2773                 } else {
2774                         sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2775                         sdkp->RCD = 0;
2776                 }
2777
2778                 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2779                 if (sdp->broken_fua) {
2780                         sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
2781                         sdkp->DPOFUA = 0;
2782                 } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw &&
2783                            !sdkp->device->use_16_for_rw) {
2784                         sd_first_printk(KERN_NOTICE, sdkp,
2785                                   "Uses READ/WRITE(6), disabling FUA\n");
2786                         sdkp->DPOFUA = 0;
2787                 }
2788
2789                 /* No cache flush allowed for write protected devices */
2790                 if (sdkp->WCE && sdkp->write_prot)
2791                         sdkp->WCE = 0;
2792
2793                 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2794                     old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2795                         sd_printk(KERN_NOTICE, sdkp,
2796                                   "Write cache: %s, read cache: %s, %s\n",
2797                                   sdkp->WCE ? "enabled" : "disabled",
2798                                   sdkp->RCD ? "disabled" : "enabled",
2799                                   sdkp->DPOFUA ? "supports DPO and FUA"
2800                                   : "doesn't support DPO or FUA");
2801
2802                 return;
2803         }
2804
2805 bad_sense:
2806         if (scsi_sense_valid(&sshdr) &&
2807             sshdr.sense_key == ILLEGAL_REQUEST &&
2808             sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2809                 /* Invalid field in CDB */
2810                 sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2811         else
2812                 sd_first_printk(KERN_ERR, sdkp,
2813                                 "Asking for cache data failed\n");
2814
2815 defaults:
2816         if (sdp->wce_default_on) {
2817                 sd_first_printk(KERN_NOTICE, sdkp,
2818                                 "Assuming drive cache: write back\n");
2819                 sdkp->WCE = 1;
2820         } else {
2821                 sd_first_printk(KERN_ERR, sdkp,
2822                                 "Assuming drive cache: write through\n");
2823                 sdkp->WCE = 0;
2824         }
2825         sdkp->RCD = 0;
2826         sdkp->DPOFUA = 0;
2827 }
2828
2829 /*
2830  * The ATO bit indicates whether the DIF application tag is available
2831  * for use by the operating system.
2832  */
2833 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2834 {
2835         int res, offset;
2836         struct scsi_device *sdp = sdkp->device;
2837         struct scsi_mode_data data;
2838         struct scsi_sense_hdr sshdr;
2839
2840         if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
2841                 return;
2842
2843         if (sdkp->protection_type == 0)
2844                 return;
2845
2846         res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2847                               SD_MAX_RETRIES, &data, &sshdr);
2848
2849         if (!scsi_status_is_good(res) || !data.header_length ||
2850             data.length < 6) {
2851                 sd_first_printk(KERN_WARNING, sdkp,
2852                           "getting Control mode page failed, assume no ATO\n");
2853
2854                 if (scsi_sense_valid(&sshdr))
2855                         sd_print_sense_hdr(sdkp, &sshdr);
2856
2857                 return;
2858         }
2859
2860         offset = data.header_length + data.block_descriptor_length;
2861
2862         if ((buffer[offset] & 0x3f) != 0x0a) {
2863                 sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2864                 return;
2865         }
2866
2867         if ((buffer[offset + 5] & 0x80) == 0)
2868                 return;
2869
2870         sdkp->ATO = 1;
2871
2872         return;
2873 }
2874
2875 /**
2876  * sd_read_block_limits - Query disk device for preferred I/O sizes.
2877  * @sdkp: disk to query
2878  */
2879 static void sd_read_block_limits(struct scsi_disk *sdkp)
2880 {
2881         unsigned int sector_sz = sdkp->device->sector_size;
2882         const int vpd_len = 64;
2883         unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2884
2885         if (!buffer ||
2886             /* Block Limits VPD */
2887             scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2888                 goto out;
2889
2890         blk_queue_io_min(sdkp->disk->queue,
2891                          get_unaligned_be16(&buffer[6]) * sector_sz);
2892
2893         sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]);
2894         sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]);
2895
2896         if (buffer[3] == 0x3c) {
2897                 unsigned int lba_count, desc_count;
2898
2899                 sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
2900
2901                 if (!sdkp->lbpme)
2902                         goto out;
2903
2904                 lba_count = get_unaligned_be32(&buffer[20]);
2905                 desc_count = get_unaligned_be32(&buffer[24]);
2906
2907                 if (lba_count && desc_count)
2908                         sdkp->max_unmap_blocks = lba_count;
2909
2910                 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2911
2912                 if (buffer[32] & 0x80)
2913                         sdkp->unmap_alignment =
2914                                 get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2915
2916                 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2917
2918                         if (sdkp->max_unmap_blocks)
2919                                 sd_config_discard(sdkp, SD_LBP_UNMAP);
2920                         else
2921                                 sd_config_discard(sdkp, SD_LBP_WS16);
2922
2923                 } else {        /* LBP VPD page tells us what to use */
2924                         if (sdkp->lbpu && sdkp->max_unmap_blocks)
2925                                 sd_config_discard(sdkp, SD_LBP_UNMAP);
2926                         else if (sdkp->lbpws)
2927                                 sd_config_discard(sdkp, SD_LBP_WS16);
2928                         else if (sdkp->lbpws10)
2929                                 sd_config_discard(sdkp, SD_LBP_WS10);
2930                         else
2931                                 sd_config_discard(sdkp, SD_LBP_DISABLE);
2932                 }
2933         }
2934
2935  out:
2936         kfree(buffer);
2937 }
2938
2939 /**
2940  * sd_read_block_characteristics - Query block dev. characteristics
2941  * @sdkp: disk to query
2942  */
2943 static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2944 {
2945         struct request_queue *q = sdkp->disk->queue;
2946         unsigned char *buffer;
2947         u16 rot;
2948         const int vpd_len = 64;
2949
2950         buffer = kmalloc(vpd_len, GFP_KERNEL);
2951
2952         if (!buffer ||
2953             /* Block Device Characteristics VPD */
2954             scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2955                 goto out;
2956
2957         rot = get_unaligned_be16(&buffer[4]);
2958
2959         if (rot == 1) {
2960                 blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
2961                 blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
2962         }
2963
2964         if (sdkp->device->type == TYPE_ZBC) {
2965                 /* Host-managed */
2966                 q->limits.zoned = BLK_ZONED_HM;
2967         } else {
2968                 sdkp->zoned = (buffer[8] >> 4) & 3;
2969                 if (sdkp->zoned == 1)
2970                         /* Host-aware */
2971                         q->limits.zoned = BLK_ZONED_HA;
2972                 else
2973                         /*
2974                          * Treat drive-managed devices as
2975                          * regular block devices.
2976                          */
2977                         q->limits.zoned = BLK_ZONED_NONE;
2978         }
2979         if (blk_queue_is_zoned(q) && sdkp->first_scan)
2980                 sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n",
2981                       q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware");
2982
2983  out:
2984         kfree(buffer);
2985 }
2986
2987 /**
2988  * sd_read_block_provisioning - Query provisioning VPD page
2989  * @sdkp: disk to query
2990  */
2991 static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2992 {
2993         unsigned char *buffer;
2994         const int vpd_len = 8;
2995
2996         if (sdkp->lbpme == 0)
2997                 return;
2998
2999         buffer = kmalloc(vpd_len, GFP_KERNEL);
3000
3001         if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
3002                 goto out;
3003
3004         sdkp->lbpvpd    = 1;
3005         sdkp->lbpu      = (buffer[5] >> 7) & 1; /* UNMAP */
3006         sdkp->lbpws     = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
3007         sdkp->lbpws10   = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
3008
3009  out:
3010         kfree(buffer);
3011 }
3012
3013 static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
3014 {
3015         struct scsi_device *sdev = sdkp->device;
3016
3017         if (sdev->host->no_write_same) {
3018                 sdev->no_write_same = 1;
3019
3020                 return;
3021         }
3022
3023         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
3024                 /* too large values might cause issues with arcmsr */
3025                 int vpd_buf_len = 64;
3026
3027                 sdev->no_report_opcodes = 1;
3028
3029                 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
3030                  * CODES is unsupported and the device has an ATA
3031                  * Information VPD page (SAT).
3032                  */
3033                 if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len))
3034                         sdev->no_write_same = 1;
3035         }
3036
3037         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
3038                 sdkp->ws16 = 1;
3039
3040         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
3041                 sdkp->ws10 = 1;
3042 }
3043
3044 static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
3045 {
3046         struct scsi_device *sdev = sdkp->device;
3047
3048         if (!sdev->security_supported)
3049                 return;
3050
3051         if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3052                         SECURITY_PROTOCOL_IN) == 1 &&
3053             scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3054                         SECURITY_PROTOCOL_OUT) == 1)
3055                 sdkp->security = 1;
3056 }
3057
3058 /**
3059  *      sd_revalidate_disk - called the first time a new disk is seen,
3060  *      performs disk spin up, read_capacity, etc.
3061  *      @disk: struct gendisk we care about
3062  **/
3063 static int sd_revalidate_disk(struct gendisk *disk)
3064 {
3065         struct scsi_disk *sdkp = scsi_disk(disk);
3066         struct scsi_device *sdp = sdkp->device;
3067         struct request_queue *q = sdkp->disk->queue;
3068         sector_t old_capacity = sdkp->capacity;
3069         unsigned char *buffer;
3070         unsigned int dev_max, rw_max;
3071
3072         SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
3073                                       "sd_revalidate_disk\n"));
3074
3075         /*
3076          * If the device is offline, don't try and read capacity or any
3077          * of the other niceties.
3078          */
3079         if (!scsi_device_online(sdp))
3080                 goto out;
3081
3082         buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
3083         if (!buffer) {
3084                 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
3085                           "allocation failure.\n");
3086                 goto out;
3087         }
3088
3089         sd_spinup_disk(sdkp);
3090
3091         /*
3092          * Without media there is no reason to ask; moreover, some devices
3093          * react badly if we do.
3094          */
3095         if (sdkp->media_present) {
3096                 sd_read_capacity(sdkp, buffer);
3097
3098                 if (scsi_device_supports_vpd(sdp)) {
3099                         sd_read_block_provisioning(sdkp);
3100                         sd_read_block_limits(sdkp);
3101                         sd_read_block_characteristics(sdkp);
3102                         sd_zbc_read_zones(sdkp, buffer);
3103                 }
3104
3105                 sd_print_capacity(sdkp, old_capacity);
3106
3107                 sd_read_write_protect_flag(sdkp, buffer);
3108                 sd_read_cache_type(sdkp, buffer);
3109                 sd_read_app_tag_own(sdkp, buffer);
3110                 sd_read_write_same(sdkp, buffer);
3111                 sd_read_security(sdkp, buffer);
3112         }
3113
3114         /*
3115          * We now have all cache related info, determine how we deal
3116          * with flush requests.
3117          */
3118         sd_set_flush_flag(sdkp);
3119
3120         /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
3121         dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
3122
3123         /* Some devices report a maximum block count for READ/WRITE requests. */
3124         dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
3125         q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
3126
3127         /*
3128          * Determine the device's preferred I/O size for reads and writes
3129          * unless the reported value is unreasonably small, large, or
3130          * garbage.
3131          */
3132         if (sdkp->opt_xfer_blocks &&
3133             sdkp->opt_xfer_blocks <= dev_max &&
3134             sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
3135             logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) {
3136                 q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
3137                 rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
3138         } else
3139                 rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
3140                                       (sector_t)BLK_DEF_MAX_SECTORS);
3141
3142         /* Do not exceed controller limit */
3143         rw_max = min(rw_max, queue_max_hw_sectors(q));
3144
3145         /*
3146          * Only update max_sectors if previously unset or if the current value
3147          * exceeds the capabilities of the hardware.
3148          */
3149         if (sdkp->first_scan ||
3150             q->limits.max_sectors > q->limits.max_dev_sectors ||
3151             q->limits.max_sectors > q->limits.max_hw_sectors)
3152                 q->limits.max_sectors = rw_max;
3153
3154         sdkp->first_scan = 0;
3155
3156         set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
3157         sd_config_write_same(sdkp);
3158         kfree(buffer);
3159
3160  out:
3161         return 0;
3162 }
3163
3164 /**
3165  *      sd_unlock_native_capacity - unlock native capacity
3166  *      @disk: struct gendisk to set capacity for
3167  *
3168  *      Block layer calls this function if it detects that partitions
3169  *      on @disk reach beyond the end of the device.  If the SCSI host
3170  *      implements ->unlock_native_capacity() method, it's invoked to
3171  *      give it a chance to adjust the device capacity.
3172  *
3173  *      CONTEXT:
3174  *      Defined by block layer.  Might sleep.
3175  */
3176 static void sd_unlock_native_capacity(struct gendisk *disk)
3177 {
3178         struct scsi_device *sdev = scsi_disk(disk)->device;
3179
3180         if (sdev->host->hostt->unlock_native_capacity)
3181                 sdev->host->hostt->unlock_native_capacity(sdev);
3182 }
3183
3184 /**
3185  *      sd_format_disk_name - format disk name
3186  *      @prefix: name prefix - ie. "sd" for SCSI disks
3187  *      @index: index of the disk to format name for
3188  *      @buf: output buffer
3189  *      @buflen: length of the output buffer
3190  *
3191  *      SCSI disk names starts at sda.  The 26th device is sdz and the
3192  *      27th is sdaa.  The last one for two lettered suffix is sdzz
3193  *      which is followed by sdaaa.
3194  *
3195  *      This is basically 26 base counting with one extra 'nil' entry
3196  *      at the beginning from the second digit on and can be
3197  *      determined using similar method as 26 base conversion with the
3198  *      index shifted -1 after each digit is computed.
3199  *
3200  *      CONTEXT:
3201  *      Don't care.
3202  *
3203  *      RETURNS:
3204  *      0 on success, -errno on failure.
3205  */
3206 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
3207 {
3208         const int base = 'z' - 'a' + 1;
3209         char *begin = buf + strlen(prefix);
3210         char *end = buf + buflen;
3211         char *p;
3212         int unit;
3213
3214         p = end - 1;
3215         *p = '\0';
3216         unit = base;
3217         do {
3218                 if (p == begin)
3219                         return -EINVAL;
3220                 *--p = 'a' + (index % unit);
3221                 index = (index / unit) - 1;
3222         } while (index >= 0);
3223
3224         memmove(begin, p, end - p);
3225         memcpy(buf, prefix, strlen(prefix));
3226
3227         return 0;
3228 }
3229
3230 /*
3231  * The asynchronous part of sd_probe
3232  */
3233 static void sd_probe_async(void *data, async_cookie_t cookie)
3234 {
3235         struct scsi_disk *sdkp = data;
3236         struct scsi_device *sdp;
3237         struct gendisk *gd;
3238         u32 index;
3239         struct device *dev;
3240
3241         sdp = sdkp->device;
3242         gd = sdkp->disk;
3243         index = sdkp->index;
3244         dev = &sdp->sdev_gendev;
3245
3246         gd->major = sd_major((index & 0xf0) >> 4);
3247         gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
3248
3249         gd->fops = &sd_fops;
3250         gd->private_data = &sdkp->driver;
3251         gd->queue = sdkp->device->request_queue;
3252
3253         /* defaults, until the device tells us otherwise */
3254         sdp->sector_size = 512;
3255         sdkp->capacity = 0;
3256         sdkp->media_present = 1;
3257         sdkp->write_prot = 0;
3258         sdkp->cache_override = 0;
3259         sdkp->WCE = 0;
3260         sdkp->RCD = 0;
3261         sdkp->ATO = 0;
3262         sdkp->first_scan = 1;
3263         sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
3264
3265         sd_revalidate_disk(gd);
3266
3267         gd->flags = GENHD_FL_EXT_DEVT;
3268         if (sdp->removable) {
3269                 gd->flags |= GENHD_FL_REMOVABLE;
3270                 gd->events |= DISK_EVENT_MEDIA_CHANGE;
3271         }
3272
3273         blk_pm_runtime_init(sdp->request_queue, dev);
3274         device_add_disk(dev, gd);
3275         if (sdkp->capacity)
3276                 sd_dif_config_host(sdkp);
3277
3278         sd_revalidate_disk(gd);
3279
3280         if (sdkp->security) {
3281                 sdkp->opal_dev = init_opal_dev(sdp, &sd_sec_submit);
3282                 if (sdkp->opal_dev)
3283                         sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n");
3284         }
3285
3286         sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
3287                   sdp->removable ? "removable " : "");
3288         scsi_autopm_put_device(sdp);
3289         put_device(&sdkp->dev);
3290 }
3291
3292 /**
3293  *      sd_probe - called during driver initialization and whenever a
3294  *      new scsi device is attached to the system. It is called once
3295  *      for each scsi device (not just disks) present.
3296  *      @dev: pointer to device object
3297  *
3298  *      Returns 0 if successful (or not interested in this scsi device
3299  *      (e.g. scanner)); 1 when there is an error.
3300  *
3301  *      Note: this function is invoked from the scsi mid-level.
3302  *      This function sets up the mapping between a given
3303  *      <host,channel,id,lun> (found in sdp) and new device name
3304  *      (e.g. /dev/sda). More precisely it is the block device major
3305  *      and minor number that is chosen here.
3306  *
3307  *      Assume sd_probe is not re-entrant (for time being)
3308  *      Also think about sd_probe() and sd_remove() running coincidentally.
3309  **/
3310 static int sd_probe(struct device *dev)
3311 {
3312         struct scsi_device *sdp = to_scsi_device(dev);
3313         struct scsi_disk *sdkp;
3314         struct gendisk *gd;
3315         int index;
3316         int error;
3317
3318         scsi_autopm_get_device(sdp);
3319         error = -ENODEV;
3320         if (sdp->type != TYPE_DISK &&
3321             sdp->type != TYPE_ZBC &&
3322             sdp->type != TYPE_MOD &&
3323             sdp->type != TYPE_RBC)
3324                 goto out;
3325
3326 #ifndef CONFIG_BLK_DEV_ZONED
3327         if (sdp->type == TYPE_ZBC)
3328                 goto out;
3329 #endif
3330         SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
3331                                         "sd_probe\n"));
3332
3333         error = -ENOMEM;
3334         sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
3335         if (!sdkp)
3336                 goto out;
3337
3338         gd = alloc_disk(SD_MINORS);
3339         if (!gd)
3340                 goto out_free;
3341
3342         do {
3343                 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
3344                         goto out_put;
3345
3346                 spin_lock(&sd_index_lock);
3347                 error = ida_get_new(&sd_index_ida, &index);
3348                 spin_unlock(&sd_index_lock);
3349         } while (error == -EAGAIN);
3350
3351         if (error) {
3352                 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
3353                 goto out_put;
3354         }
3355
3356         error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
3357         if (error) {
3358                 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
3359                 goto out_free_index;
3360         }
3361
3362         sdkp->device = sdp;
3363         sdkp->driver = &sd_template;
3364         sdkp->disk = gd;
3365         sdkp->index = index;
3366         atomic_set(&sdkp->openers, 0);
3367         atomic_set(&sdkp->device->ioerr_cnt, 0);
3368
3369         if (!sdp->request_queue->rq_timeout) {
3370                 if (sdp->type != TYPE_MOD)
3371                         blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
3372                 else
3373                         blk_queue_rq_timeout(sdp->request_queue,
3374                                              SD_MOD_TIMEOUT);
3375         }
3376
3377         device_initialize(&sdkp->dev);
3378         sdkp->dev.parent = dev;
3379         sdkp->dev.class = &sd_disk_class;
3380         dev_set_name(&sdkp->dev, "%s", dev_name(dev));
3381
3382         error = device_add(&sdkp->dev);
3383         if (error)
3384                 goto out_free_index;
3385
3386         get_device(dev);
3387         dev_set_drvdata(dev, sdkp);
3388
3389         get_device(&sdkp->dev); /* prevent release before async_schedule */
3390         async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain);
3391
3392         return 0;
3393
3394  out_free_index:
3395         spin_lock(&sd_index_lock);
3396         ida_remove(&sd_index_ida, index);
3397         spin_unlock(&sd_index_lock);
3398  out_put:
3399         put_disk(gd);
3400  out_free:
3401         kfree(sdkp);
3402  out:
3403         scsi_autopm_put_device(sdp);
3404         return error;
3405 }
3406
3407 /**
3408  *      sd_remove - called whenever a scsi disk (previously recognized by
3409  *      sd_probe) is detached from the system. It is called (potentially
3410  *      multiple times) during sd module unload.
3411  *      @dev: pointer to device object
3412  *
3413  *      Note: this function is invoked from the scsi mid-level.
3414  *      This function potentially frees up a device name (e.g. /dev/sdc)
3415  *      that could be re-used by a subsequent sd_probe().
3416  *      This function is not called when the built-in sd driver is "exit-ed".
3417  **/
3418 static int sd_remove(struct device *dev)
3419 {
3420         struct scsi_disk *sdkp;
3421         dev_t devt;
3422
3423         sdkp = dev_get_drvdata(dev);
3424         devt = disk_devt(sdkp->disk);
3425         scsi_autopm_get_device(sdkp->device);
3426
3427         async_synchronize_full_domain(&scsi_sd_pm_domain);
3428         async_synchronize_full_domain(&scsi_sd_probe_domain);
3429         device_del(&sdkp->dev);
3430         del_gendisk(sdkp->disk);
3431         sd_shutdown(dev);
3432
3433         sd_zbc_remove(sdkp);
3434
3435         free_opal_dev(sdkp->opal_dev);
3436
3437         blk_register_region(devt, SD_MINORS, NULL,
3438                             sd_default_probe, NULL, NULL);
3439
3440         mutex_lock(&sd_ref_mutex);
3441         dev_set_drvdata(dev, NULL);
3442         put_device(&sdkp->dev);
3443         mutex_unlock(&sd_ref_mutex);
3444
3445         return 0;
3446 }
3447
3448 /**
3449  *      scsi_disk_release - Called to free the scsi_disk structure
3450  *      @dev: pointer to embedded class device
3451  *
3452  *      sd_ref_mutex must be held entering this routine.  Because it is
3453  *      called on last put, you should always use the scsi_disk_get()
3454  *      scsi_disk_put() helpers which manipulate the semaphore directly
3455  *      and never do a direct put_device.
3456  **/
3457 static void scsi_disk_release(struct device *dev)
3458 {
3459         struct scsi_disk *sdkp = to_scsi_disk(dev);
3460         struct gendisk *disk = sdkp->disk;
3461
3462         spin_lock(&sd_index_lock);
3463         ida_remove(&sd_index_ida, sdkp->index);
3464         spin_unlock(&sd_index_lock);
3465
3466         disk->private_data = NULL;
3467         put_disk(disk);
3468         put_device(&sdkp->device->sdev_gendev);
3469
3470         kfree(sdkp);
3471 }
3472
3473 static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
3474 {
3475         unsigned char cmd[6] = { START_STOP };  /* START_VALID */
3476         struct scsi_sense_hdr sshdr;
3477         struct scsi_device *sdp = sdkp->device;
3478         int res;
3479
3480         if (start)
3481                 cmd[4] |= 1;    /* START */
3482
3483         if (sdp->start_stop_pwr_cond)
3484                 cmd[4] |= start ? 1 << 4 : 3 << 4;      /* Active or Standby */
3485
3486         if (!scsi_device_online(sdp))
3487                 return -ENODEV;
3488
3489         res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
3490                         SD_TIMEOUT, SD_MAX_RETRIES, 0, RQF_PM, NULL);
3491         if (res) {
3492                 sd_print_result(sdkp, "Start/Stop Unit failed", res);
3493                 if (driver_byte(res) & DRIVER_SENSE)
3494                         sd_print_sense_hdr(sdkp, &sshdr);
3495                 if (scsi_sense_valid(&sshdr) &&
3496                         /* 0x3a is medium not present */
3497                         sshdr.asc == 0x3a)
3498                         res = 0;
3499         }
3500
3501         /* SCSI error codes must not go to the generic layer */
3502         if (res)
3503                 return -EIO;
3504
3505         return 0;
3506 }
3507
3508 /*
3509  * Send a SYNCHRONIZE CACHE instruction down to the device through
3510  * the normal SCSI command structure.  Wait for the command to
3511  * complete.
3512  */
3513 static void sd_shutdown(struct device *dev)
3514 {
3515         struct scsi_disk *sdkp = dev_get_drvdata(dev);
3516
3517         if (!sdkp)
3518                 return;         /* this can happen */
3519
3520         if (pm_runtime_suspended(dev))
3521                 return;
3522
3523         if (sdkp->WCE && sdkp->media_present) {
3524                 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3525                 sd_sync_cache(sdkp, NULL);
3526         }
3527
3528         if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
3529                 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3530                 sd_start_stop_device(sdkp, 0);
3531         }
3532 }
3533
3534 static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
3535 {
3536         struct scsi_disk *sdkp = dev_get_drvdata(dev);
3537         struct scsi_sense_hdr sshdr;
3538         int ret = 0;
3539
3540         if (!sdkp)      /* E.g.: runtime suspend following sd_remove() */
3541                 return 0;
3542
3543         if (sdkp->WCE && sdkp->media_present) {
3544                 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3545                 ret = sd_sync_cache(sdkp, &sshdr);
3546
3547                 if (ret) {
3548                         /* ignore OFFLINE device */
3549                         if (ret == -ENODEV)
3550                                 return 0;
3551
3552                         if (!scsi_sense_valid(&sshdr) ||
3553                             sshdr.sense_key != ILLEGAL_REQUEST)
3554                                 return ret;
3555
3556                         /*
3557                          * sshdr.sense_key == ILLEGAL_REQUEST means this drive
3558                          * doesn't support sync. There's not much to do and
3559                          * suspend shouldn't fail.
3560                          */
3561                         ret = 0;
3562                 }
3563         }
3564
3565         if (sdkp->device->manage_start_stop) {
3566                 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3567                 /* an error is not worth aborting a system sleep */
3568                 ret = sd_start_stop_device(sdkp, 0);
3569                 if (ignore_stop_errors)
3570                         ret = 0;
3571         }
3572
3573         return ret;
3574 }
3575
3576 static int sd_suspend_system(struct device *dev)
3577 {
3578         return sd_suspend_common(dev, true);
3579 }
3580
3581 static int sd_suspend_runtime(struct device *dev)
3582 {
3583         return sd_suspend_common(dev, false);
3584 }
3585
3586 static int sd_resume(struct device *dev)
3587 {
3588         struct scsi_disk *sdkp = dev_get_drvdata(dev);
3589         int ret;
3590
3591         if (!sdkp)      /* E.g.: runtime resume at the start of sd_probe() */
3592                 return 0;
3593
3594         if (!sdkp->device->manage_start_stop)
3595                 return 0;
3596
3597         sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
3598         ret = sd_start_stop_device(sdkp, 1);
3599         if (!ret)
3600                 opal_unlock_from_suspend(sdkp->opal_dev);
3601         return ret;
3602 }
3603
3604 /**
3605  *      init_sd - entry point for this driver (both when built in or when
3606  *      a module).
3607  *
3608  *      Note: this function registers this driver with the scsi mid-level.
3609  **/
3610 static int __init init_sd(void)
3611 {
3612         int majors = 0, i, err;
3613
3614         SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3615
3616         for (i = 0; i < SD_MAJORS; i++) {
3617                 if (register_blkdev(sd_major(i), "sd") != 0)
3618                         continue;
3619                 majors++;
3620                 blk_register_region(sd_major(i), SD_MINORS, NULL,
3621                                     sd_default_probe, NULL, NULL);
3622         }
3623
3624         if (!majors)
3625                 return -ENODEV;
3626
3627         err = class_register(&sd_disk_class);
3628         if (err)
3629                 goto err_out;
3630
3631         sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
3632                                          0, 0, NULL);
3633         if (!sd_cdb_cache) {
3634                 printk(KERN_ERR "sd: can't init extended cdb cache\n");
3635                 err = -ENOMEM;
3636                 goto err_out_class;
3637         }
3638
3639         sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
3640         if (!sd_cdb_pool) {
3641                 printk(KERN_ERR "sd: can't init extended cdb pool\n");
3642                 err = -ENOMEM;
3643                 goto err_out_cache;
3644         }
3645
3646         err = scsi_register_driver(&sd_template.gendrv);
3647         if (err)
3648                 goto err_out_driver;
3649
3650         return 0;
3651
3652 err_out_driver:
3653         mempool_destroy(sd_cdb_pool);
3654
3655 err_out_cache:
3656         kmem_cache_destroy(sd_cdb_cache);
3657
3658 err_out_class:
3659         class_unregister(&sd_disk_class);
3660 err_out:
3661         for (i = 0; i < SD_MAJORS; i++)
3662                 unregister_blkdev(sd_major(i), "sd");
3663         return err;
3664 }
3665
3666 /**
3667  *      exit_sd - exit point for this driver (when it is a module).
3668  *
3669  *      Note: this function unregisters this driver from the scsi mid-level.
3670  **/
3671 static void __exit exit_sd(void)
3672 {
3673         int i;
3674
3675         SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3676
3677         scsi_unregister_driver(&sd_template.gendrv);
3678         mempool_destroy(sd_cdb_pool);
3679         kmem_cache_destroy(sd_cdb_cache);
3680
3681         class_unregister(&sd_disk_class);
3682
3683         for (i = 0; i < SD_MAJORS; i++) {
3684                 blk_unregister_region(sd_major(i), SD_MINORS);
3685                 unregister_blkdev(sd_major(i), "sd");
3686         }
3687 }
3688
3689 module_init(init_sd);
3690 module_exit(exit_sd);
3691
3692 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
3693                                struct scsi_sense_hdr *sshdr)
3694 {
3695         scsi_print_sense_hdr(sdkp->device,
3696                              sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
3697 }
3698
3699 static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,
3700                             int result)
3701 {
3702         const char *hb_string = scsi_hostbyte_string(result);
3703         const char *db_string = scsi_driverbyte_string(result);
3704
3705         if (hb_string || db_string)
3706                 sd_printk(KERN_INFO, sdkp,
3707                           "%s: Result: hostbyte=%s driverbyte=%s\n", msg,
3708                           hb_string ? hb_string : "invalid",
3709                           db_string ? db_string : "invalid");
3710         else
3711                 sd_printk(KERN_INFO, sdkp,
3712                           "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n",
3713                           msg, host_byte(result), driver_byte(result));
3714 }
3715