ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present
[linux-2.6-block.git] / drivers / pci / host / pci-imx6.c
1 /*
2  * PCIe host controller driver for Freescale i.MX6 SoCs
3  *
4  * Copyright (C) 2013 Kosagi
5  *              http://www.kosagi.com
6  *
7  * Author: Sean Cross <xobs@kosagi.com>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13
14 #include <linux/clk.h>
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/kernel.h>
18 #include <linux/mfd/syscon.h>
19 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
20 #include <linux/module.h>
21 #include <linux/of_gpio.h>
22 #include <linux/pci.h>
23 #include <linux/platform_device.h>
24 #include <linux/regmap.h>
25 #include <linux/resource.h>
26 #include <linux/signal.h>
27 #include <linux/types.h>
28 #include <linux/interrupt.h>
29
30 #include "pcie-designware.h"
31
32 #define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
33
34 struct imx6_pcie {
35         struct gpio_desc        *reset_gpio;
36         struct clk              *pcie_bus;
37         struct clk              *pcie_phy;
38         struct clk              *pcie;
39         struct pcie_port        pp;
40         struct regmap           *iomuxc_gpr;
41         void __iomem            *mem_base;
42         u32                     tx_deemph_gen1;
43         u32                     tx_deemph_gen2_3p5db;
44         u32                     tx_deemph_gen2_6db;
45         u32                     tx_swing_full;
46         u32                     tx_swing_low;
47 };
48
49 /* PCIe Root Complex registers (memory-mapped) */
50 #define PCIE_RC_LCR                             0x7c
51 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1        0x1
52 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2        0x2
53 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK        0xf
54
55 #define PCIE_RC_LCSR                            0x80
56
57 /* PCIe Port Logic registers (memory-mapped) */
58 #define PL_OFFSET 0x700
59 #define PCIE_PL_PFLR (PL_OFFSET + 0x08)
60 #define PCIE_PL_PFLR_LINK_STATE_MASK            (0x3f << 16)
61 #define PCIE_PL_PFLR_FORCE_LINK                 (1 << 15)
62 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
63 #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
64 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
65 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP          (1 << 4)
66
67 #define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
68 #define PCIE_PHY_CTRL_DATA_LOC 0
69 #define PCIE_PHY_CTRL_CAP_ADR_LOC 16
70 #define PCIE_PHY_CTRL_CAP_DAT_LOC 17
71 #define PCIE_PHY_CTRL_WR_LOC 18
72 #define PCIE_PHY_CTRL_RD_LOC 19
73
74 #define PCIE_PHY_STAT (PL_OFFSET + 0x110)
75 #define PCIE_PHY_STAT_ACK_LOC 16
76
77 #define PCIE_LINK_WIDTH_SPEED_CONTROL   0x80C
78 #define PORT_LOGIC_SPEED_CHANGE         (0x1 << 17)
79
80 /* PHY registers (not memory-mapped) */
81 #define PCIE_PHY_RX_ASIC_OUT 0x100D
82 #define PCIE_PHY_RX_ASIC_OUT_VALID      (1 << 0)
83
84 #define PHY_RX_OVRD_IN_LO 0x1005
85 #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
86 #define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
87
88 static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
89 {
90         u32 val;
91         u32 max_iterations = 10;
92         u32 wait_counter = 0;
93
94         do {
95                 val = readl(dbi_base + PCIE_PHY_STAT);
96                 val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
97                 wait_counter++;
98
99                 if (val == exp_val)
100                         return 0;
101
102                 udelay(1);
103         } while (wait_counter < max_iterations);
104
105         return -ETIMEDOUT;
106 }
107
108 static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
109 {
110         u32 val;
111         int ret;
112
113         val = addr << PCIE_PHY_CTRL_DATA_LOC;
114         writel(val, dbi_base + PCIE_PHY_CTRL);
115
116         val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
117         writel(val, dbi_base + PCIE_PHY_CTRL);
118
119         ret = pcie_phy_poll_ack(dbi_base, 1);
120         if (ret)
121                 return ret;
122
123         val = addr << PCIE_PHY_CTRL_DATA_LOC;
124         writel(val, dbi_base + PCIE_PHY_CTRL);
125
126         return pcie_phy_poll_ack(dbi_base, 0);
127 }
128
129 /* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
130 static int pcie_phy_read(void __iomem *dbi_base, int addr, int *data)
131 {
132         u32 val, phy_ctl;
133         int ret;
134
135         ret = pcie_phy_wait_ack(dbi_base, addr);
136         if (ret)
137                 return ret;
138
139         /* assert Read signal */
140         phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
141         writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
142
143         ret = pcie_phy_poll_ack(dbi_base, 1);
144         if (ret)
145                 return ret;
146
147         val = readl(dbi_base + PCIE_PHY_STAT);
148         *data = val & 0xffff;
149
150         /* deassert Read signal */
151         writel(0x00, dbi_base + PCIE_PHY_CTRL);
152
153         return pcie_phy_poll_ack(dbi_base, 0);
154 }
155
156 static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
157 {
158         u32 var;
159         int ret;
160
161         /* write addr */
162         /* cap addr */
163         ret = pcie_phy_wait_ack(dbi_base, addr);
164         if (ret)
165                 return ret;
166
167         var = data << PCIE_PHY_CTRL_DATA_LOC;
168         writel(var, dbi_base + PCIE_PHY_CTRL);
169
170         /* capture data */
171         var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
172         writel(var, dbi_base + PCIE_PHY_CTRL);
173
174         ret = pcie_phy_poll_ack(dbi_base, 1);
175         if (ret)
176                 return ret;
177
178         /* deassert cap data */
179         var = data << PCIE_PHY_CTRL_DATA_LOC;
180         writel(var, dbi_base + PCIE_PHY_CTRL);
181
182         /* wait for ack de-assertion */
183         ret = pcie_phy_poll_ack(dbi_base, 0);
184         if (ret)
185                 return ret;
186
187         /* assert wr signal */
188         var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
189         writel(var, dbi_base + PCIE_PHY_CTRL);
190
191         /* wait for ack */
192         ret = pcie_phy_poll_ack(dbi_base, 1);
193         if (ret)
194                 return ret;
195
196         /* deassert wr signal */
197         var = data << PCIE_PHY_CTRL_DATA_LOC;
198         writel(var, dbi_base + PCIE_PHY_CTRL);
199
200         /* wait for ack de-assertion */
201         ret = pcie_phy_poll_ack(dbi_base, 0);
202         if (ret)
203                 return ret;
204
205         writel(0x0, dbi_base + PCIE_PHY_CTRL);
206
207         return 0;
208 }
209
210 static void imx6_pcie_reset_phy(struct pcie_port *pp)
211 {
212         u32 tmp;
213
214         pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
215         tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
216                 PHY_RX_OVRD_IN_LO_RX_PLL_EN);
217         pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
218
219         usleep_range(2000, 3000);
220
221         pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
222         tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
223                   PHY_RX_OVRD_IN_LO_RX_PLL_EN);
224         pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
225 }
226
227 /*  Added for PCI abort handling */
228 static int imx6q_pcie_abort_handler(unsigned long addr,
229                 unsigned int fsr, struct pt_regs *regs)
230 {
231         return 0;
232 }
233
234 static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
235 {
236         struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
237         u32 val, gpr1, gpr12;
238
239         /*
240          * If the bootloader already enabled the link we need some special
241          * handling to get the core back into a state where it is safe to
242          * touch it for configuration.  As there is no dedicated reset signal
243          * wired up for MX6QDL, we need to manually force LTSSM into "detect"
244          * state before completely disabling LTSSM, which is a prerequisite
245          * for core configuration.
246          *
247          * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
248          * indication that the bootloader activated the link.
249          */
250         regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
251         regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
252
253         if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
254             (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
255                 val = readl(pp->dbi_base + PCIE_PL_PFLR);
256                 val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
257                 val |= PCIE_PL_PFLR_FORCE_LINK;
258                 writel(val, pp->dbi_base + PCIE_PL_PFLR);
259
260                 regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
261                                 IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
262         }
263
264         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
265                         IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
266         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
267                         IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
268
269         return 0;
270 }
271
272 static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
273 {
274         struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
275         int ret;
276
277         ret = clk_prepare_enable(imx6_pcie->pcie_phy);
278         if (ret) {
279                 dev_err(pp->dev, "unable to enable pcie_phy clock\n");
280                 goto err_pcie_phy;
281         }
282
283         ret = clk_prepare_enable(imx6_pcie->pcie_bus);
284         if (ret) {
285                 dev_err(pp->dev, "unable to enable pcie_bus clock\n");
286                 goto err_pcie_bus;
287         }
288
289         ret = clk_prepare_enable(imx6_pcie->pcie);
290         if (ret) {
291                 dev_err(pp->dev, "unable to enable pcie clock\n");
292                 goto err_pcie;
293         }
294
295         /* power up core phy and enable ref clock */
296         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
297                         IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
298         /*
299          * the async reset input need ref clock to sync internally,
300          * when the ref clock comes after reset, internal synced
301          * reset time is too short, cannot meet the requirement.
302          * add one ~10us delay here.
303          */
304         udelay(10);
305         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
306                         IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
307
308         /* allow the clocks to stabilize */
309         usleep_range(200, 500);
310
311         /* Some boards don't have PCIe reset GPIO. */
312         if (imx6_pcie->reset_gpio) {
313                 gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0);
314                 msleep(100);
315                 gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1);
316         }
317         return 0;
318
319 err_pcie:
320         clk_disable_unprepare(imx6_pcie->pcie_bus);
321 err_pcie_bus:
322         clk_disable_unprepare(imx6_pcie->pcie_phy);
323 err_pcie_phy:
324         return ret;
325
326 }
327
328 static void imx6_pcie_init_phy(struct pcie_port *pp)
329 {
330         struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
331
332         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
333                         IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
334
335         /* configure constant input signal to the pcie ctrl and phy */
336         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
337                         IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
338         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
339                         IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
340
341         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
342                            IMX6Q_GPR8_TX_DEEMPH_GEN1,
343                            imx6_pcie->tx_deemph_gen1 << 0);
344         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
345                            IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
346                            imx6_pcie->tx_deemph_gen2_3p5db << 6);
347         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
348                            IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
349                            imx6_pcie->tx_deemph_gen2_6db << 12);
350         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
351                            IMX6Q_GPR8_TX_SWING_FULL,
352                            imx6_pcie->tx_swing_full << 18);
353         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
354                            IMX6Q_GPR8_TX_SWING_LOW,
355                            imx6_pcie->tx_swing_low << 25);
356 }
357
358 static int imx6_pcie_wait_for_link(struct pcie_port *pp)
359 {
360         /* check if the link is up or not */
361         if (!dw_pcie_wait_for_link(pp))
362                 return 0;
363
364         dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
365                 readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
366                 readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
367         return -ETIMEDOUT;
368 }
369
370 static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp)
371 {
372         u32 tmp;
373         unsigned int retries;
374
375         for (retries = 0; retries < 200; retries++) {
376                 tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
377                 /* Test if the speed change finished. */
378                 if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
379                         return 0;
380                 usleep_range(100, 1000);
381         }
382
383         dev_err(pp->dev, "Speed change timeout\n");
384         return -EINVAL;
385 }
386
387 static irqreturn_t imx6_pcie_msi_handler(int irq, void *arg)
388 {
389         struct pcie_port *pp = arg;
390
391         return dw_handle_msi_irq(pp);
392 }
393
394 static int imx6_pcie_establish_link(struct pcie_port *pp)
395 {
396         struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
397         u32 tmp;
398         int ret;
399
400         /*
401          * Force Gen1 operation when starting the link.  In case the link is
402          * started in Gen2 mode, there is a possibility the devices on the
403          * bus will not be detected at all.  This happens with PCIe switches.
404          */
405         tmp = readl(pp->dbi_base + PCIE_RC_LCR);
406         tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
407         tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
408         writel(tmp, pp->dbi_base + PCIE_RC_LCR);
409
410         /* Start LTSSM. */
411         regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
412                         IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
413
414         ret = imx6_pcie_wait_for_link(pp);
415         if (ret) {
416                 dev_info(pp->dev, "Link never came up\n");
417                 goto err_reset_phy;
418         }
419
420         /* Allow Gen2 mode after the link is up. */
421         tmp = readl(pp->dbi_base + PCIE_RC_LCR);
422         tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
423         tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
424         writel(tmp, pp->dbi_base + PCIE_RC_LCR);
425
426         /*
427          * Start Directed Speed Change so the best possible speed both link
428          * partners support can be negotiated.
429          */
430         tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
431         tmp |= PORT_LOGIC_SPEED_CHANGE;
432         writel(tmp, pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
433
434         ret = imx6_pcie_wait_for_speed_change(pp);
435         if (ret) {
436                 dev_err(pp->dev, "Failed to bring link up!\n");
437                 goto err_reset_phy;
438         }
439
440         /* Make sure link training is finished as well! */
441         ret = imx6_pcie_wait_for_link(pp);
442         if (ret) {
443                 dev_err(pp->dev, "Failed to bring link up!\n");
444                 goto err_reset_phy;
445         }
446
447         tmp = readl(pp->dbi_base + PCIE_RC_LCSR);
448         dev_dbg(pp->dev, "Link up, Gen=%i\n", (tmp >> 16) & 0xf);
449
450         return 0;
451
452 err_reset_phy:
453         dev_dbg(pp->dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
454                 readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
455                 readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
456         imx6_pcie_reset_phy(pp);
457
458         return ret;
459 }
460
461 static void imx6_pcie_host_init(struct pcie_port *pp)
462 {
463         imx6_pcie_assert_core_reset(pp);
464
465         imx6_pcie_init_phy(pp);
466
467         imx6_pcie_deassert_core_reset(pp);
468
469         dw_pcie_setup_rc(pp);
470
471         imx6_pcie_establish_link(pp);
472
473         if (IS_ENABLED(CONFIG_PCI_MSI))
474                 dw_pcie_msi_init(pp);
475 }
476
477 static int imx6_pcie_link_up(struct pcie_port *pp)
478 {
479         return readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) &
480                         PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
481 }
482
483 static struct pcie_host_ops imx6_pcie_host_ops = {
484         .link_up = imx6_pcie_link_up,
485         .host_init = imx6_pcie_host_init,
486 };
487
488 static int __init imx6_add_pcie_port(struct pcie_port *pp,
489                         struct platform_device *pdev)
490 {
491         int ret;
492
493         if (IS_ENABLED(CONFIG_PCI_MSI)) {
494                 pp->msi_irq = platform_get_irq_byname(pdev, "msi");
495                 if (pp->msi_irq <= 0) {
496                         dev_err(&pdev->dev, "failed to get MSI irq\n");
497                         return -ENODEV;
498                 }
499
500                 ret = devm_request_irq(&pdev->dev, pp->msi_irq,
501                                        imx6_pcie_msi_handler,
502                                        IRQF_SHARED | IRQF_NO_THREAD,
503                                        "mx6-pcie-msi", pp);
504                 if (ret) {
505                         dev_err(&pdev->dev, "failed to request MSI irq\n");
506                         return ret;
507                 }
508         }
509
510         pp->root_bus_nr = -1;
511         pp->ops = &imx6_pcie_host_ops;
512
513         ret = dw_pcie_host_init(pp);
514         if (ret) {
515                 dev_err(&pdev->dev, "failed to initialize host\n");
516                 return ret;
517         }
518
519         return 0;
520 }
521
522 static int __init imx6_pcie_probe(struct platform_device *pdev)
523 {
524         struct imx6_pcie *imx6_pcie;
525         struct pcie_port *pp;
526         struct resource *dbi_base;
527         struct device_node *node = pdev->dev.of_node;
528         int ret;
529
530         imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
531         if (!imx6_pcie)
532                 return -ENOMEM;
533
534         pp = &imx6_pcie->pp;
535         pp->dev = &pdev->dev;
536
537         /* Added for PCI abort handling */
538         hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
539                 "imprecise external abort");
540
541         dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
542         pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
543         if (IS_ERR(pp->dbi_base))
544                 return PTR_ERR(pp->dbi_base);
545
546         /* Fetch GPIOs */
547         imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
548                                                         GPIOD_OUT_LOW);
549
550         /* Fetch clocks */
551         imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
552         if (IS_ERR(imx6_pcie->pcie_phy)) {
553                 dev_err(&pdev->dev,
554                         "pcie_phy clock source missing or invalid\n");
555                 return PTR_ERR(imx6_pcie->pcie_phy);
556         }
557
558         imx6_pcie->pcie_bus = devm_clk_get(&pdev->dev, "pcie_bus");
559         if (IS_ERR(imx6_pcie->pcie_bus)) {
560                 dev_err(&pdev->dev,
561                         "pcie_bus clock source missing or invalid\n");
562                 return PTR_ERR(imx6_pcie->pcie_bus);
563         }
564
565         imx6_pcie->pcie = devm_clk_get(&pdev->dev, "pcie");
566         if (IS_ERR(imx6_pcie->pcie)) {
567                 dev_err(&pdev->dev,
568                         "pcie clock source missing or invalid\n");
569                 return PTR_ERR(imx6_pcie->pcie);
570         }
571
572         /* Grab GPR config register range */
573         imx6_pcie->iomuxc_gpr =
574                  syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
575         if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
576                 dev_err(&pdev->dev, "unable to find iomuxc registers\n");
577                 return PTR_ERR(imx6_pcie->iomuxc_gpr);
578         }
579
580         /* Grab PCIe PHY Tx Settings */
581         if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
582                                  &imx6_pcie->tx_deemph_gen1))
583                 imx6_pcie->tx_deemph_gen1 = 0;
584
585         if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
586                                  &imx6_pcie->tx_deemph_gen2_3p5db))
587                 imx6_pcie->tx_deemph_gen2_3p5db = 0;
588
589         if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
590                                  &imx6_pcie->tx_deemph_gen2_6db))
591                 imx6_pcie->tx_deemph_gen2_6db = 20;
592
593         if (of_property_read_u32(node, "fsl,tx-swing-full",
594                                  &imx6_pcie->tx_swing_full))
595                 imx6_pcie->tx_swing_full = 127;
596
597         if (of_property_read_u32(node, "fsl,tx-swing-low",
598                                  &imx6_pcie->tx_swing_low))
599                 imx6_pcie->tx_swing_low = 127;
600
601         ret = imx6_add_pcie_port(pp, pdev);
602         if (ret < 0)
603                 return ret;
604
605         platform_set_drvdata(pdev, imx6_pcie);
606         return 0;
607 }
608
609 static void imx6_pcie_shutdown(struct platform_device *pdev)
610 {
611         struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
612
613         /* bring down link, so bootloader gets clean state in case of reboot */
614         imx6_pcie_assert_core_reset(&imx6_pcie->pp);
615 }
616
617 static const struct of_device_id imx6_pcie_of_match[] = {
618         { .compatible = "fsl,imx6q-pcie", },
619         {},
620 };
621 MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
622
623 static struct platform_driver imx6_pcie_driver = {
624         .driver = {
625                 .name   = "imx6q-pcie",
626                 .of_match_table = imx6_pcie_of_match,
627         },
628         .shutdown = imx6_pcie_shutdown,
629 };
630
631 /* Freescale PCIe driver does not allow module unload */
632
633 static int __init imx6_pcie_init(void)
634 {
635         return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
636 }
637 module_init(imx6_pcie_init);
638
639 MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
640 MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
641 MODULE_LICENSE("GPL v2");