intel_pstate: Clean up get_target_pstate_use_performance()
[linux-2.6-block.git] / drivers / media / usb / usbvision / usbvision-video.c
1 /*
2  * USB USBVISION Video device driver 0.9.10
3  *
4  *
5  *
6  * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
7  *
8  * This module is part of usbvision driver project.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23  *
24  * Let's call the version 0.... until compression decoding is completely
25  * implemented.
26  *
27  * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach.
28  * It was based on USB CPiA driver written by Peter Pregler,
29  * Scott J. Bertin and Johannes Erdfelt
30  * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler &
31  * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink
32  * Updates to driver completed by Dwaine P. Garden
33  *
34  *
35  * TODO:
36  *     - use submit_urb for all setup packets
37  *     - Fix memory settings for nt1004. It is 4 times as big as the
38  *       nt1003 memory.
39  *     - Add audio on endpoint 3 for nt1004 chip.
40  *         Seems impossible, needs a codec interface.  Which one?
41  *     - Clean up the driver.
42  *     - optimization for performance.
43  *     - Add Videotext capability (VBI).  Working on it.....
44  *     - Check audio for other devices
45  *
46  */
47
48 #include <linux/kernel.h>
49 #include <linux/list.h>
50 #include <linux/timer.h>
51 #include <linux/slab.h>
52 #include <linux/mm.h>
53 #include <linux/highmem.h>
54 #include <linux/vmalloc.h>
55 #include <linux/module.h>
56 #include <linux/init.h>
57 #include <linux/spinlock.h>
58 #include <linux/io.h>
59 #include <linux/videodev2.h>
60 #include <linux/i2c.h>
61
62 #include <media/i2c/saa7115.h>
63 #include <media/v4l2-common.h>
64 #include <media/v4l2-ioctl.h>
65 #include <media/v4l2-event.h>
66 #include <media/tuner.h>
67
68 #include <linux/workqueue.h>
69
70 #include "usbvision.h"
71 #include "usbvision-cards.h"
72
73 #define DRIVER_AUTHOR                                   \
74         "Joerg Heckenbach <joerg@heckenbach-aw.de>, "   \
75         "Dwaine Garden <DwaineGarden@rogers.com>"
76 #define DRIVER_NAME "usbvision"
77 #define DRIVER_ALIAS "USBVision"
78 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
79 #define DRIVER_LICENSE "GPL"
80 #define USBVISION_VERSION_STRING "0.9.11"
81
82 #define ENABLE_HEXDUMP  0       /* Enable if you need it */
83
84
85 #ifdef USBVISION_DEBUG
86         #define PDEBUG(level, fmt, args...) { \
87                 if (video_debug & (level)) \
88                         printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \
89                                 __func__, __LINE__ , ## args); \
90         }
91 #else
92         #define PDEBUG(level, fmt, args...) do {} while (0)
93 #endif
94
95 #define DBG_IO          (1 << 1)
96 #define DBG_PROBE       (1 << 2)
97 #define DBG_MMAP        (1 << 3)
98
99 /* String operations */
100 #define rmspace(str)    while (*str == ' ') str++;
101 #define goto2next(str)  while (*str != ' ') str++; while (*str == ' ') str++;
102
103
104 /* sequential number of usbvision device */
105 static int usbvision_nr;
106
107 static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
108         { 1, 1,  8, V4L2_PIX_FMT_GREY    , "GREY" },
109         { 1, 2, 16, V4L2_PIX_FMT_RGB565  , "RGB565" },
110         { 1, 3, 24, V4L2_PIX_FMT_RGB24   , "RGB24" },
111         { 1, 4, 32, V4L2_PIX_FMT_RGB32   , "RGB32" },
112         { 1, 2, 16, V4L2_PIX_FMT_RGB555  , "RGB555" },
113         { 1, 2, 16, V4L2_PIX_FMT_YUYV    , "YUV422" },
114         { 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, /* 1.5 ! */
115         { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
116 };
117
118 /* Function prototypes */
119 static void usbvision_release(struct usb_usbvision *usbvision);
120
121 /* Default initialization of device driver parameters */
122 /* Set the default format for ISOC endpoint */
123 static int isoc_mode = ISOC_MODE_COMPRESS;
124 /* Set the default Debug Mode of the device driver */
125 static int video_debug;
126 /* Sequential Number of Video Device */
127 static int video_nr = -1;
128 /* Sequential Number of Radio Device */
129 static int radio_nr = -1;
130
131 /* Grab parameters for the device driver */
132
133 /* Showing parameters under SYSFS */
134 module_param(isoc_mode, int, 0444);
135 module_param(video_debug, int, 0444);
136 module_param(video_nr, int, 0444);
137 module_param(radio_nr, int, 0444);
138
139 MODULE_PARM_DESC(isoc_mode, " Set the default format for ISOC endpoint.  Default: 0x60 (Compression On)");
140 MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver.  Default: 0 (Off)");
141 MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX).  Default: -1 (autodetect)");
142 MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
143
144
145 /* Misc stuff */
146 MODULE_AUTHOR(DRIVER_AUTHOR);
147 MODULE_DESCRIPTION(DRIVER_DESC);
148 MODULE_LICENSE(DRIVER_LICENSE);
149 MODULE_VERSION(USBVISION_VERSION_STRING);
150 MODULE_ALIAS(DRIVER_ALIAS);
151
152
153 /*****************************************************************************/
154 /* SYSFS Code - Copied from the stv680.c usb module.                         */
155 /* Device information is located at /sys/class/video4linux/video0            */
156 /* Device parameters information is located at /sys/module/usbvision         */
157 /* Device USB Information is located at                                      */
158 /*   /sys/bus/usb/drivers/USBVision Video Grabber                            */
159 /*****************************************************************************/
160
161 #define YES_NO(x) ((x) ? "Yes" : "No")
162
163 static inline struct usb_usbvision *cd_to_usbvision(struct device *cd)
164 {
165         struct video_device *vdev = to_video_device(cd);
166         return video_get_drvdata(vdev);
167 }
168
169 static ssize_t show_version(struct device *cd,
170                             struct device_attribute *attr, char *buf)
171 {
172         return sprintf(buf, "%s\n", USBVISION_VERSION_STRING);
173 }
174 static DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
175
176 static ssize_t show_model(struct device *cd,
177                           struct device_attribute *attr, char *buf)
178 {
179         struct video_device *vdev = to_video_device(cd);
180         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
181         return sprintf(buf, "%s\n",
182                        usbvision_device_data[usbvision->dev_model].model_string);
183 }
184 static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
185
186 static ssize_t show_hue(struct device *cd,
187                         struct device_attribute *attr, char *buf)
188 {
189         struct video_device *vdev = to_video_device(cd);
190         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
191         struct v4l2_control ctrl;
192         ctrl.id = V4L2_CID_HUE;
193         ctrl.value = 0;
194         if (usbvision->user)
195                 call_all(usbvision, core, g_ctrl, &ctrl);
196         return sprintf(buf, "%d\n", ctrl.value);
197 }
198 static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
199
200 static ssize_t show_contrast(struct device *cd,
201                              struct device_attribute *attr, char *buf)
202 {
203         struct video_device *vdev = to_video_device(cd);
204         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
205         struct v4l2_control ctrl;
206         ctrl.id = V4L2_CID_CONTRAST;
207         ctrl.value = 0;
208         if (usbvision->user)
209                 call_all(usbvision, core, g_ctrl, &ctrl);
210         return sprintf(buf, "%d\n", ctrl.value);
211 }
212 static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
213
214 static ssize_t show_brightness(struct device *cd,
215                                struct device_attribute *attr, char *buf)
216 {
217         struct video_device *vdev = to_video_device(cd);
218         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
219         struct v4l2_control ctrl;
220         ctrl.id = V4L2_CID_BRIGHTNESS;
221         ctrl.value = 0;
222         if (usbvision->user)
223                 call_all(usbvision, core, g_ctrl, &ctrl);
224         return sprintf(buf, "%d\n", ctrl.value);
225 }
226 static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
227
228 static ssize_t show_saturation(struct device *cd,
229                                struct device_attribute *attr, char *buf)
230 {
231         struct video_device *vdev = to_video_device(cd);
232         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
233         struct v4l2_control ctrl;
234         ctrl.id = V4L2_CID_SATURATION;
235         ctrl.value = 0;
236         if (usbvision->user)
237                 call_all(usbvision, core, g_ctrl, &ctrl);
238         return sprintf(buf, "%d\n", ctrl.value);
239 }
240 static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
241
242 static ssize_t show_streaming(struct device *cd,
243                               struct device_attribute *attr, char *buf)
244 {
245         struct video_device *vdev = to_video_device(cd);
246         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
247         return sprintf(buf, "%s\n",
248                        YES_NO(usbvision->streaming == stream_on ? 1 : 0));
249 }
250 static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
251
252 static ssize_t show_compression(struct device *cd,
253                                 struct device_attribute *attr, char *buf)
254 {
255         struct video_device *vdev = to_video_device(cd);
256         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
257         return sprintf(buf, "%s\n",
258                        YES_NO(usbvision->isoc_mode == ISOC_MODE_COMPRESS));
259 }
260 static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
261
262 static ssize_t show_device_bridge(struct device *cd,
263                                   struct device_attribute *attr, char *buf)
264 {
265         struct video_device *vdev = to_video_device(cd);
266         struct usb_usbvision *usbvision = video_get_drvdata(vdev);
267         return sprintf(buf, "%d\n", usbvision->bridge_type);
268 }
269 static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
270
271 static void usbvision_create_sysfs(struct video_device *vdev)
272 {
273         int res;
274
275         if (!vdev)
276                 return;
277         do {
278                 res = device_create_file(&vdev->dev, &dev_attr_version);
279                 if (res < 0)
280                         break;
281                 res = device_create_file(&vdev->dev, &dev_attr_model);
282                 if (res < 0)
283                         break;
284                 res = device_create_file(&vdev->dev, &dev_attr_hue);
285                 if (res < 0)
286                         break;
287                 res = device_create_file(&vdev->dev, &dev_attr_contrast);
288                 if (res < 0)
289                         break;
290                 res = device_create_file(&vdev->dev, &dev_attr_brightness);
291                 if (res < 0)
292                         break;
293                 res = device_create_file(&vdev->dev, &dev_attr_saturation);
294                 if (res < 0)
295                         break;
296                 res = device_create_file(&vdev->dev, &dev_attr_streaming);
297                 if (res < 0)
298                         break;
299                 res = device_create_file(&vdev->dev, &dev_attr_compression);
300                 if (res < 0)
301                         break;
302                 res = device_create_file(&vdev->dev, &dev_attr_bridge);
303                 if (res >= 0)
304                         return;
305         } while (0);
306
307         dev_err(&vdev->dev, "%s error: %d\n", __func__, res);
308 }
309
310 static void usbvision_remove_sysfs(struct video_device *vdev)
311 {
312         if (vdev) {
313                 device_remove_file(&vdev->dev, &dev_attr_version);
314                 device_remove_file(&vdev->dev, &dev_attr_model);
315                 device_remove_file(&vdev->dev, &dev_attr_hue);
316                 device_remove_file(&vdev->dev, &dev_attr_contrast);
317                 device_remove_file(&vdev->dev, &dev_attr_brightness);
318                 device_remove_file(&vdev->dev, &dev_attr_saturation);
319                 device_remove_file(&vdev->dev, &dev_attr_streaming);
320                 device_remove_file(&vdev->dev, &dev_attr_compression);
321                 device_remove_file(&vdev->dev, &dev_attr_bridge);
322         }
323 }
324
325 /*
326  * usbvision_open()
327  *
328  * This is part of Video 4 Linux API. The driver can be opened by one
329  * client only (checks internal counter 'usbvision->user'). The procedure
330  * then allocates buffers needed for video processing.
331  *
332  */
333 static int usbvision_v4l2_open(struct file *file)
334 {
335         struct usb_usbvision *usbvision = video_drvdata(file);
336         int err_code = 0;
337
338         PDEBUG(DBG_IO, "open");
339
340         if (mutex_lock_interruptible(&usbvision->v4l2_lock))
341                 return -ERESTARTSYS;
342
343         if (usbvision->user) {
344                 err_code = -EBUSY;
345         } else {
346                 err_code = v4l2_fh_open(file);
347                 if (err_code)
348                         goto unlock;
349
350                 /* Allocate memory for the scratch ring buffer */
351                 err_code = usbvision_scratch_alloc(usbvision);
352                 if (isoc_mode == ISOC_MODE_COMPRESS) {
353                         /* Allocate intermediate decompression buffers
354                            only if needed */
355                         err_code = usbvision_decompress_alloc(usbvision);
356                 }
357                 if (err_code) {
358                         /* Deallocate all buffers if trouble */
359                         usbvision_scratch_free(usbvision);
360                         usbvision_decompress_free(usbvision);
361                 }
362         }
363
364         /* If so far no errors then we shall start the camera */
365         if (!err_code) {
366                 /* Send init sequence only once, it's large! */
367                 if (!usbvision->initialized) {
368                         int setup_ok = 0;
369                         setup_ok = usbvision_setup(usbvision, isoc_mode);
370                         if (setup_ok)
371                                 usbvision->initialized = 1;
372                         else
373                                 err_code = -EBUSY;
374                 }
375
376                 if (!err_code) {
377                         usbvision_begin_streaming(usbvision);
378                         err_code = usbvision_init_isoc(usbvision);
379                         /* device must be initialized before isoc transfer */
380                         usbvision_muxsel(usbvision, 0);
381
382                         /* prepare queues */
383                         usbvision_empty_framequeues(usbvision);
384                         usbvision->user++;
385                 }
386         }
387
388 unlock:
389         mutex_unlock(&usbvision->v4l2_lock);
390
391         PDEBUG(DBG_IO, "success");
392         return err_code;
393 }
394
395 /*
396  * usbvision_v4l2_close()
397  *
398  * This is part of Video 4 Linux API. The procedure
399  * stops streaming and deallocates all buffers that were earlier
400  * allocated in usbvision_v4l2_open().
401  *
402  */
403 static int usbvision_v4l2_close(struct file *file)
404 {
405         struct usb_usbvision *usbvision = video_drvdata(file);
406
407         PDEBUG(DBG_IO, "close");
408
409         mutex_lock(&usbvision->v4l2_lock);
410         usbvision_audio_off(usbvision);
411         usbvision_restart_isoc(usbvision);
412         usbvision_stop_isoc(usbvision);
413
414         usbvision_decompress_free(usbvision);
415         usbvision_frames_free(usbvision);
416         usbvision_empty_framequeues(usbvision);
417         usbvision_scratch_free(usbvision);
418
419         usbvision->user--;
420         mutex_unlock(&usbvision->v4l2_lock);
421
422         if (usbvision->remove_pending) {
423                 printk(KERN_INFO "%s: Final disconnect\n", __func__);
424                 usbvision_release(usbvision);
425                 return 0;
426         }
427
428         PDEBUG(DBG_IO, "success");
429         return v4l2_fh_release(file);
430 }
431
432
433 /*
434  * usbvision_ioctl()
435  *
436  * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
437  *
438  */
439 #ifdef CONFIG_VIDEO_ADV_DEBUG
440 static int vidioc_g_register(struct file *file, void *priv,
441                                 struct v4l2_dbg_register *reg)
442 {
443         struct usb_usbvision *usbvision = video_drvdata(file);
444         int err_code;
445
446         /* NT100x has a 8-bit register space */
447         err_code = usbvision_read_reg(usbvision, reg->reg&0xff);
448         if (err_code < 0) {
449                 dev_err(&usbvision->vdev.dev,
450                         "%s: VIDIOC_DBG_G_REGISTER failed: error %d\n",
451                                 __func__, err_code);
452                 return err_code;
453         }
454         reg->val = err_code;
455         reg->size = 1;
456         return 0;
457 }
458
459 static int vidioc_s_register(struct file *file, void *priv,
460                                 const struct v4l2_dbg_register *reg)
461 {
462         struct usb_usbvision *usbvision = video_drvdata(file);
463         int err_code;
464
465         /* NT100x has a 8-bit register space */
466         err_code = usbvision_write_reg(usbvision, reg->reg & 0xff, reg->val);
467         if (err_code < 0) {
468                 dev_err(&usbvision->vdev.dev,
469                         "%s: VIDIOC_DBG_S_REGISTER failed: error %d\n",
470                                 __func__, err_code);
471                 return err_code;
472         }
473         return 0;
474 }
475 #endif
476
477 static int vidioc_querycap(struct file *file, void  *priv,
478                                         struct v4l2_capability *vc)
479 {
480         struct usb_usbvision *usbvision = video_drvdata(file);
481         struct video_device *vdev = video_devdata(file);
482
483         strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
484         strlcpy(vc->card,
485                 usbvision_device_data[usbvision->dev_model].model_string,
486                 sizeof(vc->card));
487         usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info));
488         vc->device_caps = usbvision->have_tuner ? V4L2_CAP_TUNER : 0;
489         if (vdev->vfl_type == VFL_TYPE_GRABBER)
490                 vc->device_caps |= V4L2_CAP_VIDEO_CAPTURE |
491                         V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
492         else
493                 vc->device_caps |= V4L2_CAP_RADIO;
494
495         vc->capabilities = vc->device_caps | V4L2_CAP_VIDEO_CAPTURE |
496                 V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_DEVICE_CAPS;
497         if (usbvision_device_data[usbvision->dev_model].radio)
498                 vc->capabilities |= V4L2_CAP_RADIO;
499         return 0;
500 }
501
502 static int vidioc_enum_input(struct file *file, void *priv,
503                                 struct v4l2_input *vi)
504 {
505         struct usb_usbvision *usbvision = video_drvdata(file);
506         int chan;
507
508         if (vi->index >= usbvision->video_inputs)
509                 return -EINVAL;
510         if (usbvision->have_tuner)
511                 chan = vi->index;
512         else
513                 chan = vi->index + 1; /* skip Television string*/
514
515         /* Determine the requested input characteristics
516            specific for each usbvision card model */
517         switch (chan) {
518         case 0:
519                 if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
520                         strcpy(vi->name, "White Video Input");
521                 } else {
522                         strcpy(vi->name, "Television");
523                         vi->type = V4L2_INPUT_TYPE_TUNER;
524                         vi->tuner = chan;
525                         vi->std = USBVISION_NORMS;
526                 }
527                 break;
528         case 1:
529                 vi->type = V4L2_INPUT_TYPE_CAMERA;
530                 if (usbvision_device_data[usbvision->dev_model].video_channels == 4)
531                         strcpy(vi->name, "Green Video Input");
532                 else
533                         strcpy(vi->name, "Composite Video Input");
534                 vi->std = USBVISION_NORMS;
535                 break;
536         case 2:
537                 vi->type = V4L2_INPUT_TYPE_CAMERA;
538                 if (usbvision_device_data[usbvision->dev_model].video_channels == 4)
539                         strcpy(vi->name, "Yellow Video Input");
540                 else
541                         strcpy(vi->name, "S-Video Input");
542                 vi->std = USBVISION_NORMS;
543                 break;
544         case 3:
545                 vi->type = V4L2_INPUT_TYPE_CAMERA;
546                 strcpy(vi->name, "Red Video Input");
547                 vi->std = USBVISION_NORMS;
548                 break;
549         }
550         return 0;
551 }
552
553 static int vidioc_g_input(struct file *file, void *priv, unsigned int *input)
554 {
555         struct usb_usbvision *usbvision = video_drvdata(file);
556
557         *input = usbvision->ctl_input;
558         return 0;
559 }
560
561 static int vidioc_s_input(struct file *file, void *priv, unsigned int input)
562 {
563         struct usb_usbvision *usbvision = video_drvdata(file);
564
565         if (input >= usbvision->video_inputs)
566                 return -EINVAL;
567
568         usbvision_muxsel(usbvision, input);
569         usbvision_set_input(usbvision);
570         usbvision_set_output(usbvision,
571                              usbvision->curwidth,
572                              usbvision->curheight);
573         return 0;
574 }
575
576 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id)
577 {
578         struct usb_usbvision *usbvision = video_drvdata(file);
579
580         usbvision->tvnorm_id = id;
581
582         call_all(usbvision, video, s_std, usbvision->tvnorm_id);
583         /* propagate the change to the decoder */
584         usbvision_muxsel(usbvision, usbvision->ctl_input);
585
586         return 0;
587 }
588
589 static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
590 {
591         struct usb_usbvision *usbvision = video_drvdata(file);
592
593         *id = usbvision->tvnorm_id;
594         return 0;
595 }
596
597 static int vidioc_g_tuner(struct file *file, void *priv,
598                                 struct v4l2_tuner *vt)
599 {
600         struct usb_usbvision *usbvision = video_drvdata(file);
601
602         if (vt->index)  /* Only tuner 0 */
603                 return -EINVAL;
604         if (vt->type == V4L2_TUNER_RADIO)
605                 strcpy(vt->name, "Radio");
606         else
607                 strcpy(vt->name, "Television");
608
609         /* Let clients fill in the remainder of this struct */
610         call_all(usbvision, tuner, g_tuner, vt);
611
612         return 0;
613 }
614
615 static int vidioc_s_tuner(struct file *file, void *priv,
616                                 const struct v4l2_tuner *vt)
617 {
618         struct usb_usbvision *usbvision = video_drvdata(file);
619
620         /* Only one tuner for now */
621         if (vt->index)
622                 return -EINVAL;
623         /* let clients handle this */
624         call_all(usbvision, tuner, s_tuner, vt);
625
626         return 0;
627 }
628
629 static int vidioc_g_frequency(struct file *file, void *priv,
630                                 struct v4l2_frequency *freq)
631 {
632         struct usb_usbvision *usbvision = video_drvdata(file);
633
634         /* Only one tuner */
635         if (freq->tuner)
636                 return -EINVAL;
637         if (freq->type == V4L2_TUNER_RADIO)
638                 freq->frequency = usbvision->radio_freq;
639         else
640                 freq->frequency = usbvision->tv_freq;
641
642         return 0;
643 }
644
645 static int vidioc_s_frequency(struct file *file, void *priv,
646                                 const struct v4l2_frequency *freq)
647 {
648         struct usb_usbvision *usbvision = video_drvdata(file);
649         struct v4l2_frequency new_freq = *freq;
650
651         /* Only one tuner for now */
652         if (freq->tuner)
653                 return -EINVAL;
654
655         call_all(usbvision, tuner, s_frequency, freq);
656         call_all(usbvision, tuner, g_frequency, &new_freq);
657         if (freq->type == V4L2_TUNER_RADIO)
658                 usbvision->radio_freq = new_freq.frequency;
659         else
660                 usbvision->tv_freq = new_freq.frequency;
661
662         return 0;
663 }
664
665 static int vidioc_reqbufs(struct file *file,
666                            void *priv, struct v4l2_requestbuffers *vr)
667 {
668         struct usb_usbvision *usbvision = video_drvdata(file);
669         int ret;
670
671         RESTRICT_TO_RANGE(vr->count, 1, USBVISION_NUMFRAMES);
672
673         /* Check input validity:
674            the user must do a VIDEO CAPTURE and MMAP method. */
675         if (vr->memory != V4L2_MEMORY_MMAP)
676                 return -EINVAL;
677
678         if (usbvision->streaming == stream_on) {
679                 ret = usbvision_stream_interrupt(usbvision);
680                 if (ret)
681                         return ret;
682         }
683
684         usbvision_frames_free(usbvision);
685         usbvision_empty_framequeues(usbvision);
686         vr->count = usbvision_frames_alloc(usbvision, vr->count);
687
688         usbvision->cur_frame = NULL;
689
690         return 0;
691 }
692
693 static int vidioc_querybuf(struct file *file,
694                             void *priv, struct v4l2_buffer *vb)
695 {
696         struct usb_usbvision *usbvision = video_drvdata(file);
697         struct usbvision_frame *frame;
698
699         /* FIXME : must control
700            that buffers are mapped (VIDIOC_REQBUFS has been called) */
701         if (vb->index >= usbvision->num_frames)
702                 return -EINVAL;
703         /* Updating the corresponding frame state */
704         vb->flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
705         frame = &usbvision->frame[vb->index];
706         if (frame->grabstate >= frame_state_ready)
707                 vb->flags |= V4L2_BUF_FLAG_QUEUED;
708         if (frame->grabstate >= frame_state_done)
709                 vb->flags |= V4L2_BUF_FLAG_DONE;
710         if (frame->grabstate == frame_state_unused)
711                 vb->flags |= V4L2_BUF_FLAG_MAPPED;
712         vb->memory = V4L2_MEMORY_MMAP;
713
714         vb->m.offset = vb->index * PAGE_ALIGN(usbvision->max_frame_size);
715
716         vb->memory = V4L2_MEMORY_MMAP;
717         vb->field = V4L2_FIELD_NONE;
718         vb->length = usbvision->curwidth *
719                 usbvision->curheight *
720                 usbvision->palette.bytes_per_pixel;
721         vb->timestamp = usbvision->frame[vb->index].timestamp;
722         vb->sequence = usbvision->frame[vb->index].sequence;
723         return 0;
724 }
725
726 static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *vb)
727 {
728         struct usb_usbvision *usbvision = video_drvdata(file);
729         struct usbvision_frame *frame;
730         unsigned long lock_flags;
731
732         /* FIXME : works only on VIDEO_CAPTURE MODE, MMAP. */
733         if (vb->index >= usbvision->num_frames)
734                 return -EINVAL;
735
736         frame = &usbvision->frame[vb->index];
737
738         if (frame->grabstate != frame_state_unused)
739                 return -EAGAIN;
740
741         /* Mark it as ready and enqueue frame */
742         frame->grabstate = frame_state_ready;
743         frame->scanstate = scan_state_scanning;
744         frame->scanlength = 0;  /* Accumulated in usbvision_parse_data() */
745
746         vb->flags &= ~V4L2_BUF_FLAG_DONE;
747
748         /* set v4l2_format index */
749         frame->v4l2_format = usbvision->palette;
750
751         spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
752         list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue);
753         spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
754
755         return 0;
756 }
757
758 static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *vb)
759 {
760         struct usb_usbvision *usbvision = video_drvdata(file);
761         int ret;
762         struct usbvision_frame *f;
763         unsigned long lock_flags;
764
765         if (list_empty(&(usbvision->outqueue))) {
766                 if (usbvision->streaming == stream_idle)
767                         return -EINVAL;
768                 ret = wait_event_interruptible
769                         (usbvision->wait_frame,
770                          !list_empty(&(usbvision->outqueue)));
771                 if (ret)
772                         return ret;
773         }
774
775         spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
776         f = list_entry(usbvision->outqueue.next,
777                        struct usbvision_frame, frame);
778         list_del(usbvision->outqueue.next);
779         spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
780
781         f->grabstate = frame_state_unused;
782
783         vb->memory = V4L2_MEMORY_MMAP;
784         vb->flags = V4L2_BUF_FLAG_MAPPED |
785                 V4L2_BUF_FLAG_QUEUED |
786                 V4L2_BUF_FLAG_DONE |
787                 V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
788         vb->index = f->index;
789         vb->sequence = f->sequence;
790         vb->timestamp = f->timestamp;
791         vb->field = V4L2_FIELD_NONE;
792         vb->bytesused = f->scanlength;
793
794         return 0;
795 }
796
797 static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
798 {
799         struct usb_usbvision *usbvision = video_drvdata(file);
800
801         usbvision->streaming = stream_on;
802         call_all(usbvision, video, s_stream, 1);
803
804         return 0;
805 }
806
807 static int vidioc_streamoff(struct file *file,
808                             void *priv, enum v4l2_buf_type type)
809 {
810         struct usb_usbvision *usbvision = video_drvdata(file);
811
812         if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
813                 return -EINVAL;
814
815         if (usbvision->streaming == stream_on) {
816                 usbvision_stream_interrupt(usbvision);
817                 /* Stop all video streamings */
818                 call_all(usbvision, video, s_stream, 0);
819         }
820         usbvision_empty_framequeues(usbvision);
821
822         return 0;
823 }
824
825 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
826                                         struct v4l2_fmtdesc *vfd)
827 {
828         if (vfd->index >= USBVISION_SUPPORTED_PALETTES - 1)
829                 return -EINVAL;
830         strcpy(vfd->description, usbvision_v4l2_format[vfd->index].desc);
831         vfd->pixelformat = usbvision_v4l2_format[vfd->index].format;
832         return 0;
833 }
834
835 static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
836                                         struct v4l2_format *vf)
837 {
838         struct usb_usbvision *usbvision = video_drvdata(file);
839         vf->fmt.pix.width = usbvision->curwidth;
840         vf->fmt.pix.height = usbvision->curheight;
841         vf->fmt.pix.pixelformat = usbvision->palette.format;
842         vf->fmt.pix.bytesperline =
843                 usbvision->curwidth * usbvision->palette.bytes_per_pixel;
844         vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline * usbvision->curheight;
845         vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
846         vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */
847
848         return 0;
849 }
850
851 static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
852                                struct v4l2_format *vf)
853 {
854         struct usb_usbvision *usbvision = video_drvdata(file);
855         int format_idx;
856
857         /* Find requested format in available ones */
858         for (format_idx = 0; format_idx < USBVISION_SUPPORTED_PALETTES; format_idx++) {
859                 if (vf->fmt.pix.pixelformat ==
860                    usbvision_v4l2_format[format_idx].format) {
861                         usbvision->palette = usbvision_v4l2_format[format_idx];
862                         break;
863                 }
864         }
865         /* robustness */
866         if (format_idx == USBVISION_SUPPORTED_PALETTES)
867                 return -EINVAL;
868         RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH);
869         RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT);
870
871         vf->fmt.pix.bytesperline = vf->fmt.pix.width*
872                 usbvision->palette.bytes_per_pixel;
873         vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height;
874         vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
875         vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */
876
877         return 0;
878 }
879
880 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
881                                struct v4l2_format *vf)
882 {
883         struct usb_usbvision *usbvision = video_drvdata(file);
884         int ret;
885
886         ret = vidioc_try_fmt_vid_cap(file, priv, vf);
887         if (ret)
888                 return ret;
889
890         /* stop io in case it is already in progress */
891         if (usbvision->streaming == stream_on) {
892                 ret = usbvision_stream_interrupt(usbvision);
893                 if (ret)
894                         return ret;
895         }
896         usbvision_frames_free(usbvision);
897         usbvision_empty_framequeues(usbvision);
898
899         usbvision->cur_frame = NULL;
900
901         /* by now we are committed to the new data... */
902         usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height);
903
904         return 0;
905 }
906
907 static ssize_t usbvision_read(struct file *file, char __user *buf,
908                       size_t count, loff_t *ppos)
909 {
910         struct usb_usbvision *usbvision = video_drvdata(file);
911         int noblock = file->f_flags & O_NONBLOCK;
912         unsigned long lock_flags;
913         int ret, i;
914         struct usbvision_frame *frame;
915
916         PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __func__,
917                (unsigned long)count, noblock);
918
919         if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL))
920                 return -EFAULT;
921
922         /* This entry point is compatible with the mmap routines
923            so that a user can do either VIDIOC_QBUF/VIDIOC_DQBUF
924            to get frames or call read on the device. */
925         if (!usbvision->num_frames) {
926                 /* First, allocate some frames to work with
927                    if this has not been done with VIDIOC_REQBUF */
928                 usbvision_frames_free(usbvision);
929                 usbvision_empty_framequeues(usbvision);
930                 usbvision_frames_alloc(usbvision, USBVISION_NUMFRAMES);
931         }
932
933         if (usbvision->streaming != stream_on) {
934                 /* no stream is running, make it running ! */
935                 usbvision->streaming = stream_on;
936                 call_all(usbvision, video, s_stream, 1);
937         }
938
939         /* Then, enqueue as many frames as possible
940            (like a user of VIDIOC_QBUF would do) */
941         for (i = 0; i < usbvision->num_frames; i++) {
942                 frame = &usbvision->frame[i];
943                 if (frame->grabstate == frame_state_unused) {
944                         /* Mark it as ready and enqueue frame */
945                         frame->grabstate = frame_state_ready;
946                         frame->scanstate = scan_state_scanning;
947                         /* Accumulated in usbvision_parse_data() */
948                         frame->scanlength = 0;
949
950                         /* set v4l2_format index */
951                         frame->v4l2_format = usbvision->palette;
952
953                         spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
954                         list_add_tail(&frame->frame, &usbvision->inqueue);
955                         spin_unlock_irqrestore(&usbvision->queue_lock,
956                                                lock_flags);
957                 }
958         }
959
960         /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */
961         if (list_empty(&(usbvision->outqueue))) {
962                 if (noblock)
963                         return -EAGAIN;
964
965                 ret = wait_event_interruptible
966                         (usbvision->wait_frame,
967                          !list_empty(&(usbvision->outqueue)));
968                 if (ret)
969                         return ret;
970         }
971
972         spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
973         frame = list_entry(usbvision->outqueue.next,
974                            struct usbvision_frame, frame);
975         list_del(usbvision->outqueue.next);
976         spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
977
978         /* An error returns an empty frame */
979         if (frame->grabstate == frame_state_error) {
980                 frame->bytes_read = 0;
981                 return 0;
982         }
983
984         PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld",
985                __func__,
986                frame->index, frame->bytes_read, frame->scanlength);
987
988         /* copy bytes to user space; we allow for partials reads */
989         if ((count + frame->bytes_read) > (unsigned long)frame->scanlength)
990                 count = frame->scanlength - frame->bytes_read;
991
992         if (copy_to_user(buf, frame->data + frame->bytes_read, count))
993                 return -EFAULT;
994
995         frame->bytes_read += count;
996         PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld",
997                __func__,
998                (unsigned long)count, frame->bytes_read);
999
1000 #if 1
1001         /*
1002          * FIXME:
1003          * For now, forget the frame if it has not been read in one shot.
1004          */
1005         frame->bytes_read = 0;
1006
1007         /* Mark it as available to be used again. */
1008         frame->grabstate = frame_state_unused;
1009 #else
1010         if (frame->bytes_read >= frame->scanlength) {
1011                 /* All data has been read */
1012                 frame->bytes_read = 0;
1013
1014                 /* Mark it as available to be used again. */
1015                 frame->grabstate = frame_state_unused;
1016         }
1017 #endif
1018
1019         return count;
1020 }
1021
1022 static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
1023                       size_t count, loff_t *ppos)
1024 {
1025         struct usb_usbvision *usbvision = video_drvdata(file);
1026         int res;
1027
1028         if (mutex_lock_interruptible(&usbvision->v4l2_lock))
1029                 return -ERESTARTSYS;
1030         res = usbvision_read(file, buf, count, ppos);
1031         mutex_unlock(&usbvision->v4l2_lock);
1032         return res;
1033 }
1034
1035 static int usbvision_mmap(struct file *file, struct vm_area_struct *vma)
1036 {
1037         unsigned long size = vma->vm_end - vma->vm_start,
1038                 start = vma->vm_start;
1039         void *pos;
1040         u32 i;
1041         struct usb_usbvision *usbvision = video_drvdata(file);
1042
1043         PDEBUG(DBG_MMAP, "mmap");
1044
1045         if (!USBVISION_IS_OPERATIONAL(usbvision))
1046                 return -EFAULT;
1047
1048         if (!(vma->vm_flags & VM_WRITE) ||
1049             size != PAGE_ALIGN(usbvision->max_frame_size)) {
1050                 return -EINVAL;
1051         }
1052
1053         for (i = 0; i < usbvision->num_frames; i++) {
1054                 if (((PAGE_ALIGN(usbvision->max_frame_size)*i) >> PAGE_SHIFT) ==
1055                     vma->vm_pgoff)
1056                         break;
1057         }
1058         if (i == usbvision->num_frames) {
1059                 PDEBUG(DBG_MMAP,
1060                        "mmap: user supplied mapping address is out of range");
1061                 return -EINVAL;
1062         }
1063
1064         /* VM_IO is eventually going to replace PageReserved altogether */
1065         vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
1066
1067         pos = usbvision->frame[i].data;
1068         while (size > 0) {
1069                 if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
1070                         PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed");
1071                         return -EAGAIN;
1072                 }
1073                 start += PAGE_SIZE;
1074                 pos += PAGE_SIZE;
1075                 size -= PAGE_SIZE;
1076         }
1077
1078         return 0;
1079 }
1080
1081 static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
1082 {
1083         struct usb_usbvision *usbvision = video_drvdata(file);
1084         int res;
1085
1086         if (mutex_lock_interruptible(&usbvision->v4l2_lock))
1087                 return -ERESTARTSYS;
1088         res = usbvision_mmap(file, vma);
1089         mutex_unlock(&usbvision->v4l2_lock);
1090         return res;
1091 }
1092
1093 /*
1094  * Here comes the stuff for radio on usbvision based devices
1095  *
1096  */
1097 static int usbvision_radio_open(struct file *file)
1098 {
1099         struct usb_usbvision *usbvision = video_drvdata(file);
1100         int err_code = 0;
1101
1102         PDEBUG(DBG_IO, "%s:", __func__);
1103
1104         if (mutex_lock_interruptible(&usbvision->v4l2_lock))
1105                 return -ERESTARTSYS;
1106         err_code = v4l2_fh_open(file);
1107         if (err_code)
1108                 goto out;
1109         if (usbvision->user) {
1110                 dev_err(&usbvision->rdev.dev,
1111                         "%s: Someone tried to open an already opened USBVision Radio!\n",
1112                                 __func__);
1113                 err_code = -EBUSY;
1114         } else {
1115                 /* Alternate interface 1 is is the biggest frame size */
1116                 err_code = usbvision_set_alternate(usbvision);
1117                 if (err_code < 0) {
1118                         usbvision->last_error = err_code;
1119                         err_code = -EBUSY;
1120                         goto out;
1121                 }
1122
1123                 /* If so far no errors then we shall start the radio */
1124                 usbvision->radio = 1;
1125                 call_all(usbvision, tuner, s_radio);
1126                 usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO);
1127                 usbvision->user++;
1128         }
1129 out:
1130         mutex_unlock(&usbvision->v4l2_lock);
1131         return err_code;
1132 }
1133
1134
1135 static int usbvision_radio_close(struct file *file)
1136 {
1137         struct usb_usbvision *usbvision = video_drvdata(file);
1138
1139         PDEBUG(DBG_IO, "");
1140
1141         mutex_lock(&usbvision->v4l2_lock);
1142         /* Set packet size to 0 */
1143         usbvision->iface_alt = 0;
1144         usb_set_interface(usbvision->dev, usbvision->iface,
1145                                     usbvision->iface_alt);
1146
1147         usbvision_audio_off(usbvision);
1148         usbvision->radio = 0;
1149         usbvision->user--;
1150         mutex_unlock(&usbvision->v4l2_lock);
1151
1152         if (usbvision->remove_pending) {
1153                 printk(KERN_INFO "%s: Final disconnect\n", __func__);
1154                 v4l2_fh_release(file);
1155                 usbvision_release(usbvision);
1156                 return 0;
1157         }
1158
1159         PDEBUG(DBG_IO, "success");
1160         return v4l2_fh_release(file);
1161 }
1162
1163 /* Video registration stuff */
1164
1165 /* Video template */
1166 static const struct v4l2_file_operations usbvision_fops = {
1167         .owner             = THIS_MODULE,
1168         .open           = usbvision_v4l2_open,
1169         .release        = usbvision_v4l2_close,
1170         .read           = usbvision_v4l2_read,
1171         .mmap           = usbvision_v4l2_mmap,
1172         .unlocked_ioctl = video_ioctl2,
1173 };
1174
1175 static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
1176         .vidioc_querycap      = vidioc_querycap,
1177         .vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
1178         .vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
1179         .vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
1180         .vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
1181         .vidioc_reqbufs       = vidioc_reqbufs,
1182         .vidioc_querybuf      = vidioc_querybuf,
1183         .vidioc_qbuf          = vidioc_qbuf,
1184         .vidioc_dqbuf         = vidioc_dqbuf,
1185         .vidioc_s_std         = vidioc_s_std,
1186         .vidioc_g_std         = vidioc_g_std,
1187         .vidioc_enum_input    = vidioc_enum_input,
1188         .vidioc_g_input       = vidioc_g_input,
1189         .vidioc_s_input       = vidioc_s_input,
1190         .vidioc_streamon      = vidioc_streamon,
1191         .vidioc_streamoff     = vidioc_streamoff,
1192         .vidioc_g_tuner       = vidioc_g_tuner,
1193         .vidioc_s_tuner       = vidioc_s_tuner,
1194         .vidioc_g_frequency   = vidioc_g_frequency,
1195         .vidioc_s_frequency   = vidioc_s_frequency,
1196         .vidioc_log_status    = v4l2_ctrl_log_status,
1197         .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
1198         .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
1199 #ifdef CONFIG_VIDEO_ADV_DEBUG
1200         .vidioc_g_register    = vidioc_g_register,
1201         .vidioc_s_register    = vidioc_s_register,
1202 #endif
1203 };
1204
1205 static struct video_device usbvision_video_template = {
1206         .fops           = &usbvision_fops,
1207         .ioctl_ops      = &usbvision_ioctl_ops,
1208         .name           = "usbvision-video",
1209         .release        = video_device_release_empty,
1210         .tvnorms        = USBVISION_NORMS,
1211 };
1212
1213
1214 /* Radio template */
1215 static const struct v4l2_file_operations usbvision_radio_fops = {
1216         .owner             = THIS_MODULE,
1217         .open           = usbvision_radio_open,
1218         .release        = usbvision_radio_close,
1219         .poll           = v4l2_ctrl_poll,
1220         .unlocked_ioctl = video_ioctl2,
1221 };
1222
1223 static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
1224         .vidioc_querycap      = vidioc_querycap,
1225         .vidioc_g_tuner       = vidioc_g_tuner,
1226         .vidioc_s_tuner       = vidioc_s_tuner,
1227         .vidioc_g_frequency   = vidioc_g_frequency,
1228         .vidioc_s_frequency   = vidioc_s_frequency,
1229         .vidioc_log_status    = v4l2_ctrl_log_status,
1230         .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
1231         .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
1232 };
1233
1234 static struct video_device usbvision_radio_template = {
1235         .fops           = &usbvision_radio_fops,
1236         .name           = "usbvision-radio",
1237         .release        = video_device_release_empty,
1238         .ioctl_ops      = &usbvision_radio_ioctl_ops,
1239 };
1240
1241
1242 static void usbvision_vdev_init(struct usb_usbvision *usbvision,
1243                                 struct video_device *vdev,
1244                                 const struct video_device *vdev_template,
1245                                 const char *name)
1246 {
1247         struct usb_device *usb_dev = usbvision->dev;
1248
1249         if (usb_dev == NULL) {
1250                 dev_err(&usbvision->dev->dev,
1251                         "%s: usbvision->dev is not set\n", __func__);
1252                 return;
1253         }
1254
1255         *vdev = *vdev_template;
1256         vdev->lock = &usbvision->v4l2_lock;
1257         vdev->v4l2_dev = &usbvision->v4l2_dev;
1258         snprintf(vdev->name, sizeof(vdev->name), "%s", name);
1259         video_set_drvdata(vdev, usbvision);
1260 }
1261
1262 /* unregister video4linux devices */
1263 static void usbvision_unregister_video(struct usb_usbvision *usbvision)
1264 {
1265         /* Radio Device: */
1266         if (video_is_registered(&usbvision->rdev)) {
1267                 PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
1268                        video_device_node_name(&usbvision->rdev));
1269                 video_unregister_device(&usbvision->rdev);
1270         }
1271
1272         /* Video Device: */
1273         if (video_is_registered(&usbvision->vdev)) {
1274                 PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
1275                        video_device_node_name(&usbvision->vdev));
1276                 video_unregister_device(&usbvision->vdev);
1277         }
1278 }
1279
1280 /* register video4linux devices */
1281 static int usbvision_register_video(struct usb_usbvision *usbvision)
1282 {
1283         int res = -ENOMEM;
1284
1285         /* Video Device: */
1286         usbvision_vdev_init(usbvision, &usbvision->vdev,
1287                               &usbvision_video_template, "USBVision Video");
1288         if (!usbvision->have_tuner) {
1289                 v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_G_FREQUENCY);
1290                 v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_S_TUNER);
1291                 v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_G_FREQUENCY);
1292                 v4l2_disable_ioctl(&usbvision->vdev, VIDIOC_S_TUNER);
1293         }
1294         if (video_register_device(&usbvision->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
1295                 goto err_exit;
1296         printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n",
1297                usbvision->nr, video_device_node_name(&usbvision->vdev));
1298
1299         /* Radio Device: */
1300         if (usbvision_device_data[usbvision->dev_model].radio) {
1301                 /* usbvision has radio */
1302                 usbvision_vdev_init(usbvision, &usbvision->rdev,
1303                               &usbvision_radio_template, "USBVision Radio");
1304                 if (video_register_device(&usbvision->rdev, VFL_TYPE_RADIO, radio_nr) < 0)
1305                         goto err_exit;
1306                 printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n",
1307                        usbvision->nr, video_device_node_name(&usbvision->rdev));
1308         }
1309         /* all done */
1310         return 0;
1311
1312  err_exit:
1313         dev_err(&usbvision->dev->dev,
1314                 "USBVision[%d]: video_register_device() failed\n",
1315                         usbvision->nr);
1316         usbvision_unregister_video(usbvision);
1317         return res;
1318 }
1319
1320 /*
1321  * usbvision_alloc()
1322  *
1323  * This code allocates the struct usb_usbvision.
1324  * It is filled with default values.
1325  *
1326  * Returns NULL on error, a pointer to usb_usbvision else.
1327  *
1328  */
1329 static struct usb_usbvision *usbvision_alloc(struct usb_device *dev,
1330                                              struct usb_interface *intf)
1331 {
1332         struct usb_usbvision *usbvision;
1333
1334         usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL);
1335         if (usbvision == NULL)
1336                 return NULL;
1337
1338         usbvision->dev = dev;
1339         if (v4l2_device_register(&intf->dev, &usbvision->v4l2_dev))
1340                 goto err_free;
1341
1342         if (v4l2_ctrl_handler_init(&usbvision->hdl, 4))
1343                 goto err_unreg;
1344         usbvision->v4l2_dev.ctrl_handler = &usbvision->hdl;
1345         mutex_init(&usbvision->v4l2_lock);
1346
1347         /* prepare control urb for control messages during interrupts */
1348         usbvision->ctrl_urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
1349         if (usbvision->ctrl_urb == NULL)
1350                 goto err_unreg;
1351         init_waitqueue_head(&usbvision->ctrl_urb_wq);
1352
1353         return usbvision;
1354
1355 err_unreg:
1356         v4l2_ctrl_handler_free(&usbvision->hdl);
1357         v4l2_device_unregister(&usbvision->v4l2_dev);
1358 err_free:
1359         kfree(usbvision);
1360         return NULL;
1361 }
1362
1363 /*
1364  * usbvision_release()
1365  *
1366  * This code does final release of struct usb_usbvision. This happens
1367  * after the device is disconnected -and- all clients closed their files.
1368  *
1369  */
1370 static void usbvision_release(struct usb_usbvision *usbvision)
1371 {
1372         PDEBUG(DBG_PROBE, "");
1373
1374         usbvision->initialized = 0;
1375
1376         usbvision_remove_sysfs(&usbvision->vdev);
1377         usbvision_unregister_video(usbvision);
1378         kfree(usbvision->alt_max_pkt_size);
1379
1380         usb_free_urb(usbvision->ctrl_urb);
1381
1382         v4l2_ctrl_handler_free(&usbvision->hdl);
1383         v4l2_device_unregister(&usbvision->v4l2_dev);
1384         kfree(usbvision);
1385
1386         PDEBUG(DBG_PROBE, "success");
1387 }
1388
1389
1390 /*********************** usb interface **********************************/
1391
1392 static void usbvision_configure_video(struct usb_usbvision *usbvision)
1393 {
1394         int model;
1395
1396         if (usbvision == NULL)
1397                 return;
1398
1399         model = usbvision->dev_model;
1400         usbvision->palette = usbvision_v4l2_format[2]; /* V4L2_PIX_FMT_RGB24; */
1401
1402         if (usbvision_device_data[usbvision->dev_model].vin_reg2_override) {
1403                 usbvision->vin_reg2_preset =
1404                         usbvision_device_data[usbvision->dev_model].vin_reg2;
1405         } else {
1406                 usbvision->vin_reg2_preset = 0;
1407         }
1408
1409         usbvision->tvnorm_id = usbvision_device_data[model].video_norm;
1410         usbvision->video_inputs = usbvision_device_data[model].video_channels;
1411         usbvision->ctl_input = 0;
1412         usbvision->radio_freq = 87.5 * 16000;
1413         usbvision->tv_freq = 400 * 16;
1414
1415         /* This should be here to make i2c clients to be able to register */
1416         /* first switch off audio */
1417         if (usbvision_device_data[model].audio_channels > 0)
1418                 usbvision_audio_off(usbvision);
1419         /* and then power up the tuner */
1420         usbvision_power_on(usbvision);
1421         usbvision_i2c_register(usbvision);
1422 }
1423
1424 /*
1425  * usbvision_probe()
1426  *
1427  * This procedure queries device descriptor and accepts the interface
1428  * if it looks like USBVISION video device
1429  *
1430  */
1431 static int usbvision_probe(struct usb_interface *intf,
1432                            const struct usb_device_id *devid)
1433 {
1434         struct usb_device *dev = usb_get_dev(interface_to_usbdev(intf));
1435         struct usb_interface *uif;
1436         __u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
1437         const struct usb_host_interface *interface;
1438         struct usb_usbvision *usbvision = NULL;
1439         const struct usb_endpoint_descriptor *endpoint;
1440         int model, i, ret;
1441
1442         PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u",
1443                                 dev->descriptor.idVendor,
1444                                 dev->descriptor.idProduct, ifnum);
1445
1446         model = devid->driver_info;
1447         if (model < 0 || model >= usbvision_device_data_size) {
1448                 PDEBUG(DBG_PROBE, "model out of bounds %d", model);
1449                 ret = -ENODEV;
1450                 goto err_usb;
1451         }
1452         printk(KERN_INFO "%s: %s found\n", __func__,
1453                                 usbvision_device_data[model].model_string);
1454
1455         /*
1456          * this is a security check.
1457          * an exploit using an incorrect bInterfaceNumber is known
1458          */
1459         if (ifnum >= USB_MAXINTERFACES || !dev->actconfig->interface[ifnum])
1460                 return -ENODEV;
1461
1462         if (usbvision_device_data[model].interface >= 0)
1463                 interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
1464         else if (ifnum < dev->actconfig->desc.bNumInterfaces)
1465                 interface = &dev->actconfig->interface[ifnum]->altsetting[0];
1466         else {
1467                 dev_err(&intf->dev, "interface %d is invalid, max is %d\n",
1468                     ifnum, dev->actconfig->desc.bNumInterfaces - 1);
1469                 ret = -ENODEV;
1470                 goto err_usb;
1471         }
1472
1473         if (interface->desc.bNumEndpoints < 2) {
1474                 dev_err(&intf->dev, "interface %d has %d endpoints, but must"
1475                     " have minimum 2\n", ifnum, interface->desc.bNumEndpoints);
1476                 ret = -ENODEV;
1477                 goto err_usb;
1478         }
1479         endpoint = &interface->endpoint[1].desc;
1480
1481         if (!usb_endpoint_xfer_isoc(endpoint)) {
1482                 dev_err(&intf->dev, "%s: interface %d. has non-ISO endpoint!\n",
1483                     __func__, ifnum);
1484                 dev_err(&intf->dev, "%s: Endpoint attributes %d",
1485                     __func__, endpoint->bmAttributes);
1486                 ret = -ENODEV;
1487                 goto err_usb;
1488         }
1489         if (usb_endpoint_dir_out(endpoint)) {
1490                 dev_err(&intf->dev, "%s: interface %d. has ISO OUT endpoint!\n",
1491                     __func__, ifnum);
1492                 ret = -ENODEV;
1493                 goto err_usb;
1494         }
1495
1496         usbvision = usbvision_alloc(dev, intf);
1497         if (usbvision == NULL) {
1498                 dev_err(&intf->dev, "%s: couldn't allocate USBVision struct\n", __func__);
1499                 ret = -ENOMEM;
1500                 goto err_usb;
1501         }
1502
1503         if (dev->descriptor.bNumConfigurations > 1)
1504                 usbvision->bridge_type = BRIDGE_NT1004;
1505         else if (model == DAZZLE_DVC_90_REV_1_SECAM)
1506                 usbvision->bridge_type = BRIDGE_NT1005;
1507         else
1508                 usbvision->bridge_type = BRIDGE_NT1003;
1509         PDEBUG(DBG_PROBE, "bridge_type %d", usbvision->bridge_type);
1510
1511         /* compute alternate max packet sizes */
1512         uif = dev->actconfig->interface[0];
1513
1514         usbvision->num_alt = uif->num_altsetting;
1515         PDEBUG(DBG_PROBE, "Alternate settings: %i", usbvision->num_alt);
1516         usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL);
1517         if (usbvision->alt_max_pkt_size == NULL) {
1518                 dev_err(&intf->dev, "usbvision: out of memory!\n");
1519                 ret = -ENOMEM;
1520                 goto err_pkt;
1521         }
1522
1523         for (i = 0; i < usbvision->num_alt; i++) {
1524                 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
1525                                       wMaxPacketSize);
1526                 usbvision->alt_max_pkt_size[i] =
1527                         (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
1528                 PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i", i,
1529                        usbvision->alt_max_pkt_size[i]);
1530         }
1531
1532
1533         usbvision->nr = usbvision_nr++;
1534
1535         spin_lock_init(&usbvision->queue_lock);
1536         init_waitqueue_head(&usbvision->wait_frame);
1537         init_waitqueue_head(&usbvision->wait_stream);
1538
1539         usbvision->have_tuner = usbvision_device_data[model].tuner;
1540         if (usbvision->have_tuner)
1541                 usbvision->tuner_type = usbvision_device_data[model].tuner_type;
1542
1543         usbvision->dev_model = model;
1544         usbvision->remove_pending = 0;
1545         usbvision->iface = ifnum;
1546         usbvision->iface_alt = 0;
1547         usbvision->video_endp = endpoint->bEndpointAddress;
1548         usbvision->isoc_packet_size = 0;
1549         usbvision->usb_bandwidth = 0;
1550         usbvision->user = 0;
1551         usbvision->streaming = stream_off;
1552         usbvision_configure_video(usbvision);
1553         usbvision_register_video(usbvision);
1554
1555         usbvision_create_sysfs(&usbvision->vdev);
1556
1557         PDEBUG(DBG_PROBE, "success");
1558         return 0;
1559
1560 err_pkt:
1561         usbvision_release(usbvision);
1562 err_usb:
1563         usb_put_dev(dev);
1564         return ret;
1565 }
1566
1567
1568 /*
1569  * usbvision_disconnect()
1570  *
1571  * This procedure stops all driver activity, deallocates interface-private
1572  * structure (pointed by 'ptr') and after that driver should be removable
1573  * with no ill consequences.
1574  *
1575  */
1576 static void usbvision_disconnect(struct usb_interface *intf)
1577 {
1578         struct usb_usbvision *usbvision = to_usbvision(usb_get_intfdata(intf));
1579
1580         PDEBUG(DBG_PROBE, "");
1581
1582         if (usbvision == NULL) {
1583                 pr_err("%s: usb_get_intfdata() failed\n", __func__);
1584                 return;
1585         }
1586
1587         mutex_lock(&usbvision->v4l2_lock);
1588
1589         /* At this time we ask to cancel outstanding URBs */
1590         usbvision_stop_isoc(usbvision);
1591
1592         v4l2_device_disconnect(&usbvision->v4l2_dev);
1593         usbvision_i2c_unregister(usbvision);
1594         usbvision->remove_pending = 1;  /* Now all ISO data will be ignored */
1595
1596         usb_put_dev(usbvision->dev);
1597         usbvision->dev = NULL;  /* USB device is no more */
1598
1599         mutex_unlock(&usbvision->v4l2_lock);
1600
1601         if (usbvision->user) {
1602                 printk(KERN_INFO "%s: In use, disconnect pending\n",
1603                        __func__);
1604                 wake_up_interruptible(&usbvision->wait_frame);
1605                 wake_up_interruptible(&usbvision->wait_stream);
1606         } else {
1607                 usbvision_release(usbvision);
1608         }
1609
1610         PDEBUG(DBG_PROBE, "success");
1611 }
1612
1613 static struct usb_driver usbvision_driver = {
1614         .name           = "usbvision",
1615         .id_table       = usbvision_table,
1616         .probe          = usbvision_probe,
1617         .disconnect     = usbvision_disconnect,
1618 };
1619
1620 /*
1621  * usbvision_init()
1622  *
1623  * This code is run to initialize the driver.
1624  *
1625  */
1626 static int __init usbvision_init(void)
1627 {
1628         int err_code;
1629
1630         PDEBUG(DBG_PROBE, "");
1631
1632         PDEBUG(DBG_IO,  "IO      debugging is enabled [video]");
1633         PDEBUG(DBG_PROBE, "PROBE   debugging is enabled [video]");
1634         PDEBUG(DBG_MMAP, "MMAP    debugging is enabled [video]");
1635
1636         /* disable planar mode support unless compression enabled */
1637         if (isoc_mode != ISOC_MODE_COMPRESS) {
1638                 /* FIXME : not the right way to set supported flag */
1639                 usbvision_v4l2_format[6].supported = 0; /* V4L2_PIX_FMT_YVU420 */
1640                 usbvision_v4l2_format[7].supported = 0; /* V4L2_PIX_FMT_YUV422P */
1641         }
1642
1643         err_code = usb_register(&usbvision_driver);
1644
1645         if (err_code == 0) {
1646                 printk(KERN_INFO DRIVER_DESC " : " USBVISION_VERSION_STRING "\n");
1647                 PDEBUG(DBG_PROBE, "success");
1648         }
1649         return err_code;
1650 }
1651
1652 static void __exit usbvision_exit(void)
1653 {
1654         PDEBUG(DBG_PROBE, "");
1655
1656         usb_deregister(&usbvision_driver);
1657         PDEBUG(DBG_PROBE, "success");
1658 }
1659
1660 module_init(usbvision_init);
1661 module_exit(usbvision_exit);