arm64: dts: Fix broken architected timer interrupt trigger
[linux-2.6-block.git] / arch / arm64 / boot / dts / broadcom / ns2.dtsi
1 /*
2  *  BSD LICENSE
3  *
4  *  Copyright (c) 2015 Broadcom.  All rights reserved.
5  *
6  *  Redistribution and use in source and binary forms, with or without
7  *  modification, are permitted provided that the following conditions
8  *  are met:
9  *
10  *    * Redistributions of source code must retain the above copyright
11  *      notice, this list of conditions and the following disclaimer.
12  *    * Redistributions in binary form must reproduce the above copyright
13  *      notice, this list of conditions and the following disclaimer in
14  *      the documentation and/or other materials provided with the
15  *      distribution.
16  *    * Neither the name of Broadcom Corporation nor the names of its
17  *      contributors may be used to endorse or promote products derived
18  *      from this software without specific prior written permission.
19  *
20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  */
32
33 #include <dt-bindings/interrupt-controller/arm-gic.h>
34 #include <dt-bindings/clock/bcm-ns2.h>
35
36 / {
37         compatible = "brcm,ns2";
38         interrupt-parent = <&gic>;
39         #address-cells = <2>;
40         #size-cells = <2>;
41
42         cpus {
43                 #address-cells = <2>;
44                 #size-cells = <0>;
45
46                 A57_0: cpu@0 {
47                         device_type = "cpu";
48                         compatible = "arm,cortex-a57", "arm,armv8";
49                         reg = <0 0>;
50                         enable-method = "psci";
51                         next-level-cache = <&CLUSTER0_L2>;
52                 };
53
54                 A57_1: cpu@1 {
55                         device_type = "cpu";
56                         compatible = "arm,cortex-a57", "arm,armv8";
57                         reg = <0 1>;
58                         enable-method = "psci";
59                         next-level-cache = <&CLUSTER0_L2>;
60                 };
61
62                 A57_2: cpu@2 {
63                         device_type = "cpu";
64                         compatible = "arm,cortex-a57", "arm,armv8";
65                         reg = <0 2>;
66                         enable-method = "psci";
67                         next-level-cache = <&CLUSTER0_L2>;
68                 };
69
70                 A57_3: cpu@3 {
71                         device_type = "cpu";
72                         compatible = "arm,cortex-a57", "arm,armv8";
73                         reg = <0 3>;
74                         enable-method = "psci";
75                         next-level-cache = <&CLUSTER0_L2>;
76                 };
77
78                 CLUSTER0_L2: l2-cache@000 {
79                         compatible = "cache";
80                 };
81         };
82
83         psci {
84                 compatible = "arm,psci-1.0";
85                 method = "smc";
86         };
87
88         timer {
89                 compatible = "arm,armv8-timer";
90                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
91                               IRQ_TYPE_LEVEL_LOW)>,
92                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
93                               IRQ_TYPE_LEVEL_LOW)>,
94                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
95                               IRQ_TYPE_LEVEL_LOW)>,
96                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
97                               IRQ_TYPE_LEVEL_LOW)>;
98         };
99
100         pmu {
101                 compatible = "arm,armv8-pmuv3";
102                 interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
103                              <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
104                              <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
105                              <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
106                 interrupt-affinity = <&A57_0>,
107                                      <&A57_1>,
108                                      <&A57_2>,
109                                      <&A57_3>;
110         };
111
112         pcie0: pcie@20020000 {
113                 compatible = "brcm,iproc-pcie";
114                 reg = <0 0x20020000 0 0x1000>;
115
116                 #interrupt-cells = <1>;
117                 interrupt-map-mask = <0 0 0 0>;
118                 interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;
119
120                 linux,pci-domain = <0>;
121
122                 bus-range = <0x00 0xff>;
123
124                 #address-cells = <3>;
125                 #size-cells = <2>;
126                 device_type = "pci";
127                 ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
128
129                 brcm,pcie-ob;
130                 brcm,pcie-ob-oarr-size;
131                 brcm,pcie-ob-axi-offset = <0x00000000>;
132                 brcm,pcie-ob-window-size = <256>;
133
134                 status = "disabled";
135
136                 msi-parent = <&msi0>;
137                 msi0: msi@20020000 {
138                         compatible = "brcm,iproc-msi";
139                         msi-controller;
140                         interrupt-parent = <&gic>;
141                         interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
142                                      <GIC_SPI 278 IRQ_TYPE_NONE>,
143                                      <GIC_SPI 279 IRQ_TYPE_NONE>,
144                                      <GIC_SPI 280 IRQ_TYPE_NONE>;
145                         brcm,num-eq-region = <1>;
146                         brcm,num-msi-msg-region = <1>;
147                 };
148         };
149
150         pcie4: pcie@50020000 {
151                 compatible = "brcm,iproc-pcie";
152                 reg = <0 0x50020000 0 0x1000>;
153
154                 #interrupt-cells = <1>;
155                 interrupt-map-mask = <0 0 0 0>;
156                 interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;
157
158                 linux,pci-domain = <4>;
159
160                 bus-range = <0x00 0xff>;
161
162                 #address-cells = <3>;
163                 #size-cells = <2>;
164                 device_type = "pci";
165                 ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
166
167                 brcm,pcie-ob;
168                 brcm,pcie-ob-oarr-size;
169                 brcm,pcie-ob-axi-offset = <0x30000000>;
170                 brcm,pcie-ob-window-size = <256>;
171
172                 status = "disabled";
173
174                 msi-parent = <&msi4>;
175                 msi4: msi@50020000 {
176                         compatible = "brcm,iproc-msi";
177                         msi-controller;
178                         interrupt-parent = <&gic>;
179                         interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
180                                      <GIC_SPI 302 IRQ_TYPE_NONE>,
181                                      <GIC_SPI 303 IRQ_TYPE_NONE>,
182                                      <GIC_SPI 304 IRQ_TYPE_NONE>;
183                 };
184         };
185
186         soc: soc {
187                 compatible = "simple-bus";
188                 #address-cells = <1>;
189                 #size-cells = <1>;
190                 ranges = <0 0 0 0xffffffff>;
191
192                 #include "ns2-clock.dtsi"
193
194                 dma0: dma@61360000 {
195                         compatible = "arm,pl330", "arm,primecell";
196                         reg = <0x61360000 0x1000>;
197                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
198                                      <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
199                                      <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
200                                      <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
201                                      <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
202                                      <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
203                                      <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
204                                      <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
205                                      <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
206                         #dma-cells = <1>;
207                         #dma-channels = <8>;
208                         #dma-requests = <32>;
209                         clocks = <&iprocslow>;
210                         clock-names = "apb_pclk";
211                 };
212
213                 smmu: mmu@64000000 {
214                         compatible = "arm,mmu-500";
215                         reg = <0x64000000 0x40000>;
216                         #global-interrupts = <2>;
217                         interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
218                                      <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
219                                      <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
220                                      <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
221                                      <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
222                                      <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
223                                      <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
224                                      <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
225                                      <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
226                                      <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
227                                      <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
228                                      <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
229                                      <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
230                                      <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
231                                      <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
232                                      <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
233                                      <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
234                                      <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
235                                      <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
236                                      <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
237                                      <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
238                                      <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
239                                      <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
240                                      <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
241                                      <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
242                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
243                                      <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
244                                      <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
245                                      <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
246                                      <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
247                                      <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
248                                      <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
249                                      <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
250                                      <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
251                         mmu-masters;
252                 };
253
254                 pinctrl: pinctrl@6501d130 {
255                         compatible = "brcm,ns2-pinmux";
256                         reg = <0x6501d130 0x08>,
257                               <0x660a0028 0x04>,
258                               <0x660009b0 0x40>;
259                 };
260
261                 gpio_aon: gpio@65024800 {
262                         compatible = "brcm,iproc-gpio";
263                         reg = <0x65024800 0x50>,
264                               <0x65024008 0x18>;
265                         ngpios = <6>;
266                         #gpio-cells = <2>;
267                         gpio-controller;
268                 };
269
270                 gic: interrupt-controller@65210000 {
271                         compatible = "arm,gic-400";
272                         #interrupt-cells = <3>;
273                         interrupt-controller;
274                         reg = <0x65210000 0x1000>,
275                               <0x65220000 0x1000>,
276                               <0x65240000 0x2000>,
277                               <0x65260000 0x1000>;
278                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
279                                       IRQ_TYPE_LEVEL_HIGH)>;
280                 };
281
282                 cci@65590000 {
283                         compatible = "arm,cci-400";
284                         #address-cells = <1>;
285                         #size-cells = <1>;
286                         reg = <0x65590000 0x1000>;
287                         ranges = <0 0x65590000 0x10000>;
288
289                         pmu@9000 {
290                                 compatible = "arm,cci-400-pmu,r1",
291                                              "arm,cci-400-pmu";
292                                 reg = <0x9000 0x4000>;
293                                 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
294                                              <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
295                                              <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
296                                              <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
297                                              <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
298                                              <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
299                         };
300                 };
301
302                 mdio_mux_iproc: mdio-mux@6602023c {
303                         compatible = "brcm,mdio-mux-iproc";
304                         reg = <0x6602023c 0x14>;
305                         #address-cells = <1>;
306                         #size-cells = <0>;
307
308                         mdio@0 {
309                                 reg = <0x0>;
310                                 #address-cells = <1>;
311                                 #size-cells = <0>;
312
313                                 pci_phy0: pci-phy@0 {
314                                         compatible = "brcm,ns2-pcie-phy";
315                                         reg = <0x0>;
316                                         #phy-cells = <0>;
317                                         status = "disabled";
318                                 };
319                         };
320
321                         mdio@7 {
322                                 reg = <0x7>;
323                                 #address-cells = <1>;
324                                 #size-cells = <0>;
325
326                                 pci_phy1: pci-phy@0 {
327                                         compatible = "brcm,ns2-pcie-phy";
328                                         reg = <0x0>;
329                                         #phy-cells = <0>;
330                                         status = "disabled";
331                                 };
332                         };
333
334                         mdio@10 {
335                                 reg = <0x10>;
336                                 #address-cells = <1>;
337                                 #size-cells = <0>;
338                         };
339                 };
340
341                 timer0: timer@66030000 {
342                         compatible = "arm,sp804", "arm,primecell";
343                         reg = <0x66030000 0x1000>;
344                         interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
345                         clocks = <&iprocslow>,
346                                  <&iprocslow>,
347                                  <&iprocslow>;
348                         clock-names = "timer1", "timer2", "apb_pclk";
349                 };
350
351                 timer1: timer@66040000 {
352                         compatible = "arm,sp804", "arm,primecell";
353                         reg = <0x66040000 0x1000>;
354                         interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
355                         clocks = <&iprocslow>,
356                                  <&iprocslow>,
357                                  <&iprocslow>;
358                         clock-names = "timer1", "timer2", "apb_pclk";
359                 };
360
361                 timer2: timer@66050000 {
362                         compatible = "arm,sp804", "arm,primecell";
363                         reg = <0x66050000 0x1000>;
364                         interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
365                         clocks = <&iprocslow>,
366                                  <&iprocslow>,
367                                  <&iprocslow>;
368                         clock-names = "timer1", "timer2", "apb_pclk";
369                 };
370
371                 timer3: timer@66060000 {
372                         compatible = "arm,sp804", "arm,primecell";
373                         reg = <0x66060000 0x1000>;
374                         interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
375                         clocks = <&iprocslow>,
376                                  <&iprocslow>,
377                                  <&iprocslow>;
378                         clock-names = "timer1", "timer2", "apb_pclk";
379                 };
380
381                 i2c0: i2c@66080000 {
382                         compatible = "brcm,iproc-i2c";
383                         reg = <0x66080000 0x100>;
384                         #address-cells = <1>;
385                         #size-cells = <0>;
386                         interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
387                         clock-frequency = <100000>;
388                         status = "disabled";
389                 };
390
391                 wdt0: watchdog@66090000 {
392                         compatible = "arm,sp805", "arm,primecell";
393                         reg = <0x66090000 0x1000>;
394                         interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
395                         clocks = <&iprocslow>, <&iprocslow>;
396                         clock-names = "wdogclk", "apb_pclk";
397                 };
398
399                 gpio_g: gpio@660a0000 {
400                         compatible = "brcm,iproc-gpio";
401                         reg = <0x660a0000 0x50>;
402                         ngpios = <32>;
403                         #gpio-cells = <2>;
404                         gpio-controller;
405                         interrupt-controller;
406                         interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
407                 };
408
409                 i2c1: i2c@660b0000 {
410                         compatible = "brcm,iproc-i2c";
411                         reg = <0x660b0000 0x100>;
412                         #address-cells = <1>;
413                         #size-cells = <0>;
414                         interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
415                         clock-frequency = <100000>;
416                         status = "disabled";
417                 };
418
419                 uart0: serial@66100000 {
420                         compatible = "snps,dw-apb-uart";
421                         reg = <0x66100000 0x100>;
422                         interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
423                         clocks = <&iprocslow>;
424                         reg-shift = <2>;
425                         reg-io-width = <4>;
426                         status = "disabled";
427                 };
428
429                 uart1: serial@66110000 {
430                         compatible = "snps,dw-apb-uart";
431                         reg = <0x66110000 0x100>;
432                         interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
433                         clocks = <&iprocslow>;
434                         reg-shift = <2>;
435                         reg-io-width = <4>;
436                         status = "disabled";
437                 };
438
439                 uart2: serial@66120000 {
440                         compatible = "snps,dw-apb-uart";
441                         reg = <0x66120000 0x100>;
442                         interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
443                         clocks = <&iprocslow>;
444                         reg-shift = <2>;
445                         reg-io-width = <4>;
446                         status = "disabled";
447                 };
448
449                 uart3: serial@66130000 {
450                         compatible = "snps,dw-apb-uart";
451                         reg = <0x66130000 0x100>;
452                         interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
453                         reg-shift = <2>;
454                         reg-io-width = <4>;
455                         clocks = <&osc>;
456                         status = "disabled";
457                 };
458
459                 ssp0: ssp@66180000 {
460                         compatible = "arm,pl022", "arm,primecell";
461                         reg = <0x66180000 0x1000>;
462                         interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
463                         clocks = <&iprocslow>, <&iprocslow>;
464                         clock-names = "spiclk", "apb_pclk";
465                         #address-cells = <1>;
466                         #size-cells = <0>;
467                         status = "disabled";
468                 };
469
470                 ssp1: ssp@66190000 {
471                         compatible = "arm,pl022", "arm,primecell";
472                         reg = <0x66190000 0x1000>;
473                         interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
474                         clocks = <&iprocslow>, <&iprocslow>;
475                         clock-names = "spiclk", "apb_pclk";
476                         #address-cells = <1>;
477                         #size-cells = <0>;
478                         status = "disabled";
479                 };
480
481                 hwrng: hwrng@66220000 {
482                         compatible = "brcm,iproc-rng200";
483                         reg = <0x66220000 0x28>;
484                 };
485
486                 sata_phy: sata_phy@663f0100 {
487                         compatible = "brcm,iproc-ns2-sata-phy";
488                         reg = <0x663f0100 0x1f00>,
489                               <0x663f004c 0x10>;
490                         reg-names = "phy", "phy-ctrl";
491                         #address-cells = <1>;
492                         #size-cells = <0>;
493
494                         sata_phy0: sata-phy@0 {
495                                 reg = <0>;
496                                 #phy-cells = <0>;
497                                 status = "disabled";
498                         };
499
500                         sata_phy1: sata-phy@1 {
501                                 reg = <1>;
502                                 #phy-cells = <0>;
503                                 status = "disabled";
504                         };
505                 };
506
507                 sata: ahci@663f2000 {
508                         compatible = "brcm,iproc-ahci", "generic-ahci";
509                         reg = <0x663f2000 0x1000>;
510                         reg-names = "ahci";
511                         interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
512                         #address-cells = <1>;
513                         #size-cells = <0>;
514                         status = "disabled";
515
516                         sata0: sata-port@0 {
517                                 reg = <0>;
518                                 phys = <&sata_phy0>;
519                                 phy-names = "sata-phy";
520                         };
521
522                         sata1: sata-port@1 {
523                                 reg = <1>;
524                                 phys = <&sata_phy1>;
525                                 phy-names = "sata-phy";
526                         };
527                 };
528
529                 sdio0: sdhci@66420000 {
530                         compatible = "brcm,sdhci-iproc-cygnus";
531                         reg = <0x66420000 0x100>;
532                         interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
533                         bus-width = <8>;
534                         clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
535                         status = "disabled";
536                 };
537
538                 sdio1: sdhci@66430000 {
539                         compatible = "brcm,sdhci-iproc-cygnus";
540                         reg = <0x66430000 0x100>;
541                         interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
542                         bus-width = <8>;
543                         clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
544                         status = "disabled";
545                 };
546
547                 nand: nand@66460000 {
548                         compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
549                         reg = <0x66460000 0x600>,
550                               <0x67015408 0x600>,
551                               <0x66460f00 0x20>;
552                         reg-names = "nand", "iproc-idm", "iproc-ext";
553                         interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
554
555                         #address-cells = <1>;
556                         #size-cells = <0>;
557
558                         brcm,nand-has-wp;
559                 };
560         };
561 };