.PD
.RE
.P
+`z' suffix specifies that the value is measured in zones.
+Value is recalculated once block device's zone size becomes known.
+.P
If the option accepts an upper and lower range, use a colon ':' or
minus '\-' to separate such values. See \fIirange\fR parameter type.
If the lower value specified happens to be larger than the upper value
.B $jobname
The name of the worker thread or process.
.TP
+.B $clientuid
+IP of the fio process when using client/server mode.
+.TP
.B $jobnum
The incremental number of the worker thread or process.
.TP
.TP
.BI ioscheduler \fR=\fPstr
Attempt to switch the device hosting the file to the specified I/O scheduler
-before running.
+before running. If the file is a pipe, a character device file or if device
+hosting the file could not be determined, this option is ignored.
.TP
.BI create_serialize \fR=\fPbool
If true, serialize the file creation for the jobs. This may be handy to
block device, the zone capacity is obtained from the device information and this
option is ignored.
.TP
-.BI zoneskip \fR=\fPint
+.BI zoneskip \fR=\fPint[z]
For \fBzonemode\fR=strided, the number of bytes to skip after \fBzonesize\fR
bytes of data have been transferred.
times before generating a new offset.
.RE
.TP
-.BI unified_rw_reporting \fR=\fPbool
+.BI unified_rw_reporting \fR=\fPstr
Fio normally reports statistics on a per data direction basis, meaning that
-reads, writes, and trims are accounted and reported separately. If this
-option is set fio sums the results and report them as "mixed" instead.
+reads, writes, and trims are accounted and reported separately. This option
+determines whether fio reports the results normally, summed together, or as
+both options.
+Accepted values are:
+.RS
+.TP
+.B none
+Normal statistics reporting.
+.TP
+.B mixed
+Statistics are summed per data direction and reported together.
+.TP
+.B both
+Statistics are reported normally, followed by the mixed statistics.
+.TP
+.B 0
+Backward-compatible alias for \fBnone\fR.
+.TP
+.B 1
+Backward-compatible alias for \fBmixed\fR.
+.TP
+.B 2
+Alias for \fBboth\fR.
+.RE
.TP
.BI randrepeat \fR=\fPbool
Seed the random number generator used for random I/O patterns in a
should be associated with them.
.RE
.TP
-.BI offset \fR=\fPint
+.BI offset \fR=\fPint[%|z]
Start I/O at the provided offset in the file, given as either a fixed size in
bytes or a percentage. If a percentage is given, the generated offset will be
aligned to the minimum \fBblocksize\fR or to the value of \fBoffset_align\fR if
is aligned upwards to this value. Defaults to 0 meaning that a percentage
offset is aligned to the minimum block size.
.TP
-.BI offset_increment \fR=\fPint
+.BI offset_increment \fR=\fPint[%|z]
If this is provided, then the real offset becomes `\fBoffset\fR + \fBoffset_increment\fR
* thread_number', where the thread number is a counter that starts at 0 and
is incremented for each sub-job (i.e. when \fBnumjobs\fR option is
limit reads or writes to a certain rate. If that is the case, then the
distribution may be skewed. Default: 50.
.TP
-.BI random_distribution \fR=\fPstr:float[,str:float][,str:float]
+.BI random_distribution \fR=\fPstr:float[:float][,str:float][,str:float]
By default, fio will use a completely uniform random distribution when asked
to perform random I/O. Sometimes it is useful to skew the distribution in
specific ways, ensuring that some parts of the data is more hot than others.
map. For the \fBnormal\fR distribution, a normal (Gaussian) deviation is
supplied as a value between 0 and 100.
.P
+The second, optional float is allowed for \fBpareto\fR, \fBzipf\fR and \fBnormal\fR
+distributions. It allows to set base of distribution in non-default place, giving
+more control over most probable outcome. This value is in range [0-1] which maps linearly to
+range of possible random values.
+Defaults are: random for \fBpareto\fR and \fBzipf\fR, and 0.5 for \fBnormal\fR.
+If you wanted to use \fBzipf\fR with a `theta` of 1.2 centered on 1/4 of allowed value range,
+you would use `random_distibution=zipf:1.2:0.25`.
+.P
For a \fBzoned\fR distribution, fio supports specifying percentages of I/O
access that should fall within what range of the file or device. For
example, given a criteria of:
This will be ignored if \fBpre_read\fR is also specified for the
same job.
.TP
-.BI sync \fR=\fPbool
-Use synchronous I/O for buffered writes. For the majority of I/O engines,
-this means using O_SYNC. Default: false.
+.BI sync \fR=\fPstr
+Whether, and what type, of synchronous I/O to use for writes. The allowed
+values are:
+.RS
+.RS
+.TP
+.B none
+Do not use synchronous IO, the default.
+.TP
+.B 0
+Same as \fBnone\fR.
+.TP
+.B sync
+Use synchronous file IO. For the majority of I/O engines,
+this means using O_SYNC.
+.TP
+.B 1
+Same as \fBsync\fR.
+.TP
+.B dsync
+Use synchronous data IO. For the majority of I/O engines,
+this means using O_DSYNC.
+.PD
+.RE
+.RE
.TP
.BI iomem \fR=\fPstr "\fR,\fP mem" \fR=\fPstr
Fio can use various types of memory as the I/O unit buffer. The allowed
simulate a smaller amount of memory. The amount specified is per worker.
.SS "I/O size"
.TP
-.BI size \fR=\fPint
+.BI size \fR=\fPint[%|z]
The total size of file I/O for each thread of this job. Fio will run until
this many bytes has been transferred, unless runtime is limited by other options
(such as \fBruntime\fR, for instance, or increased/decreased by \fBio_size\fR).
Can be combined with \fBoffset\fR to constrain the start and end range
that I/O will be done within.
.TP
-.BI io_size \fR=\fPint "\fR,\fB io_limit" \fR=\fPint
+.BI io_size \fR=\fPint[%|z] "\fR,\fB io_limit" \fR=\fPint[%|z]
Normally fio operates within the region set by \fBsize\fR, which means
that the \fBsize\fR option sets both the region and size of I/O to be
performed. Sometimes that is not what you want. With this option, it is
will perform I/O within the first 20GiB but exit when 5GiB have been
done. The opposite is also possible \-\- if \fBsize\fR is set to 20GiB,
and \fBio_size\fR is set to 40GiB, then fio will do 40GiB of I/O within
-the 0..20GiB region.
+the 0..20GiB region. Value can be set as percentage: \fBio_size\fR=N%.
+In this case \fBio_size\fR multiplies \fBsize\fR= value.
.TP
.BI filesize \fR=\fPirange(int)
Individual file sizes. May be a range, in which case fio will select sizes
.TP
.B cpuio
Doesn't transfer any data, but burns CPU cycles according to the
-\fBcpuload\fR and \fBcpuchunks\fR options. Setting
-\fBcpuload\fR\=85 will cause that job to do nothing but burn 85%
-of the CPU. In case of SMP machines, use `numjobs=<nr_of_cpu>'
-to get desired CPU usage, as the cpuload only loads a
-single CPU at the desired rate. A job never finishes unless there is
-at least one non-cpuio job.
-.TP
-.B guasi
-The GUASI I/O engine is the Generic Userspace Asynchronous Syscall
-Interface approach to async I/O. See \fIhttp://www.xmailserver.org/guasi-lib.html\fR
-for more info on GUASI.
+\fBcpuload\fR, \fBcpuchunks\fR and \fBcpumode\fR options.
+A job never finishes unless there is at least one non-cpuio job.
+.RS
+.P
+.PD 0
+\fBcpuload\fR\=85 will cause that job to do nothing but burn 85% of the CPU.
+In case of SMP machines, use \fBnumjobs=<nr_of_cpu>\fR\ to get desired CPU usage,
+as the cpuload only loads a single CPU at the desired rate.
+
+.P
+\fBcpumode\fR\=qsort replace the default noop instructions loop
+by a qsort algorithm to consume more energy.
+
+.P
+.RE
.TP
.B rdma
The RDMA I/O engine supports both RDMA memory semantics
and 'nrfiles', so that files will be created.
This engine is to measure file lookup and meta data access.
.TP
+.B filedelete
+Simply delete files by unlink() and do no I/O to the file. You need to set 'filesize'
+and 'nrfiles', so that files will be created.
+This engine is to measure file delete.
+.TP
.B libpmem
Read and write using mmap I/O to a file on a filesystem
mounted with DAX on a persistent memory device through the PMDK
.TP
.B nbd
Synchronous read and write a Network Block Device (NBD).
+.TP
+.B libcufile
+I/O engine supporting libcufile synchronous access to nvidia-fs and a
+GPUDirect Storage-supported filesystem. This engine performs
+I/O without transferring buffers between user-space and the kernel,
+unless \fBverify\fR is set or \fBcuda_io\fR is \fBposix\fR. \fBiomem\fR must
+not be \fBcudamalloc\fR. This ioengine defines engine specific options.
+.TP
+.B dfs
+I/O engine supporting asynchronous read and write operations to the DAOS File
+System (DFS) via libdfs.
.SS "I/O engine specific parameters"
In addition, there are some parameters which are only valid when a specific
\fBioengine\fR is in use. These are used identically to normal parameters,
this will be the starting port number since fio will use a range of
ports.
.TP
-.BI (rdma)port
+.BI (rdma, librpma_*)port
The port to use for RDMA-CM communication. This should be the same
value on the client and the server side.
.TP
If the job is a TCP listener or UDP reader, the hostname is not used
and must be omitted unless it is a valid UDP multicast address.
.TP
+.BI (librpma_*)serverip \fR=\fPstr
+The IP address to be used for RDMA-CM based I/O.
+.TP
+.BI (librpma_*_server)direct_write_to_pmem \fR=\fPbool
+Set to 1 only when Direct Write to PMem from the remote host is possible. Otherwise, set to 0.
+.TP
.BI (netsplice,net)interface \fR=\fPstr
The IP address of the network interface used to send or receive UDP
multicast.
Poll store instead of waiting for completion. Usually this provides better
throughput at cost of higher(up to 100%) CPU utilization.
.TP
+.BI (rados)touch_objects \fR=\fPbool
+During initialization, touch (create if do not exist) all objects (files).
+Touching all objects affects ceph caches and likely impacts test results.
+Enabled by default.
+.TP
.BI (http)http_host \fR=\fPstr
Hostname to connect to. For S3, this could be the bucket name. Default
is \fBlocalhost\fR
Specify stat system call type to measure lookup/getattr performance.
Default is \fBstat\fR for \fBstat\fR\|(2).
.TP
+.BI (sg)hipri
+If this option is set, fio will attempt to use polled IO completions. This
+will have a similar effect as (io_uring)hipri. Only SCSI READ and WRITE
+commands will have the SGV4_FLAG_HIPRI set (not UNMAP (trim) nor VERIFY).
+Older versions of the Linux sg driver that do not support hipri will simply
+ignore this flag and do normal IO. The Linux SCSI Low Level Driver (LLD)
+that "owns" the device also needs to support hipri (also known as iopoll
+and mq_poll). The MegaRAID driver is an example of a SCSI LLD.
+Default: clear (0) which does normal (interrupted based) IO.
+.TP
.BI (sg)readfua \fR=\fPbool
With readfua option set to 1, read operations include the force
unit access (fua) flag. Default: 0.
\fInbd+unix:///?socket=/tmp/socket\fR
.TP
\fInbds://tlshost/exportname\fR
-
+.RE
+.RE
+.TP
+.BI (libcufile)gpu_dev_ids\fR=\fPstr
+Specify the GPU IDs to use with CUDA. This is a colon-separated list of int.
+GPUs are assigned to workers roundrobin. Default is 0.
+.TP
+.BI (libcufile)cuda_io\fR=\fPstr
+Specify the type of I/O to use with CUDA. This option
+takes the following values:
+.RS
+.RS
+.TP
+.B cufile (default)
+Use libcufile and nvidia-fs. This option performs I/O directly
+between a GPUDirect Storage filesystem and GPU buffers,
+avoiding use of a bounce buffer. If \fBverify\fR is set,
+cudaMemcpy is used to copy verification data between RAM and GPU(s).
+Verification data is copied from RAM to GPU before a write
+and from GPU to RAM after a read.
+\fBdirect\fR must be 1.
+.TP
+.BI posix
+Use POSIX to perform I/O with a RAM buffer, and use
+cudaMemcpy to transfer data between RAM and the GPU(s).
+Data is copied from GPU to RAM before a write and copied
+from RAM to GPU after a read. \fBverify\fR does not affect
+the use of cudaMemcpy.
+.RE
+.RE
+.TP
+.BI (dfs)pool
+Specify the UUID of the DAOS pool to connect to.
+.TP
+.BI (dfs)cont
+Specify the UUID of the DAOS DAOS container to open.
+.TP
+.BI (dfs)chunk_size
+Specificy a different chunk size (in bytes) for the dfs file.
+Use DAOS container's chunk size by default.
+.TP
+.BI (dfs)object_class
+Specificy a different object class for the dfs file.
+Use DAOS container's object class by default.
.SS "I/O depth"
.TP
.BI iodepth \fR=\fPint
can increase latencies. The benefit is that fio can manage submission rates
independently of the device completion rates. This avoids skewed latency
reporting if I/O gets backed up on the device side (the coordinated omission
-problem).
+problem). Note that this option cannot reliably be used with async IO engines.
.SS "I/O rate"
.TP
.BI thinktime \fR=\fPtime
before we have to complete it and do our \fBthinktime\fR. In other words, this
setting effectively caps the queue depth if the latter is larger.
.TP
+.BI thinktime_blocks_type \fR=\fPstr
+Only valid if \fBthinktime\fR is set - control how \fBthinktime_blocks\fR triggers.
+The default is `complete', which triggers \fBthinktime\fR when fio completes
+\fBthinktime_blocks\fR blocks. If this is set to `issue', then the trigger happens
+at the issue side.
+.TP
.BI rate \fR=\fPint[,int][,int]
Cap the bandwidth used by this job. The number is in bytes/sec, the normal
suffix rules apply. Comma-separated values may be specified for reads,
queue depth that meets \fBlatency_target\fR and exit. If true, fio will continue
running and try to meet \fBlatency_target\fR by adjusting queue depth.
.TP
-.BI max_latency \fR=\fPtime
+.BI max_latency \fR=\fPtime[,time][,time]
If set, fio will exit the job with an ETIMEDOUT error if it exceeds this
maximum latency. When the unit is omitted, the value is interpreted in
-microseconds.
+microseconds. Comma-separated values may be specified for reads, writes,
+and trims as described in \fBblocksize\fR.
.TP
.BI rate_cycle \fR=\fPint
Average bandwidth for \fBrate\fR and \fBrate_min\fR over this number
flow. See \fBflow\fR.
.TP
.BI flow \fR=\fPint
-Weight in token-based flow control. If this value is used, then there is
-a 'flow counter' which is used to regulate the proportion of activity between
-two or more jobs. Fio attempts to keep this flow counter near zero. The
-\fBflow\fR parameter stands for how much should be added or subtracted to the
-flow counter on each iteration of the main I/O loop. That is, if one job has
-`flow=8' and another job has `flow=\-1', then there will be a roughly 1:8
-ratio in how much one runs vs the other.
-.TP
-.BI flow_watermark \fR=\fPint
-The maximum value that the absolute value of the flow counter is allowed to
-reach before the job must wait for a lower value of the counter.
+Weight in token-based flow control. If this value is used,
+then fio regulates the activity between two or more jobs
+sharing the same flow_id.
+Fio attempts to keep each job activity proportional to other jobs' activities
+in the same flow_id group, with respect to requested weight per job.
+That is, if one job has `flow=3', another job has `flow=2'
+and another with `flow=1`, then there will be a roughly 3:2:1 ratio
+in how much one runs vs the others.
.TP
.BI flow_sleep \fR=\fPint
-The period of time, in microseconds, to wait after the flow watermark has
-been exceeded before retrying operations.
+The period of time, in microseconds, to wait after the flow counter
+has exceeded its proportion before retrying operations.
.TP
.BI stonewall "\fR,\fB wait_for_previous"
Wait for preceding jobs in the job file to exit, before starting this
minimal output v3, separated by semicolons:
.P
.nf
- terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_min;read_clat_max;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_min;write_clat_max;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
+ terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth_kb;read_iops;read_runtime_ms;read_slat_min_us;read_slat_max_us;read_slat_mean_us;read_slat_dev_us;read_clat_min_us;read_clat_max_us;read_clat_mean_us;read_clat_dev_us;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min_us;read_lat_max_us;read_lat_mean_us;read_lat_dev_us;read_bw_min_kb;read_bw_max_kb;read_bw_agg_pct;read_bw_mean_kb;read_bw_dev_kb;write_kb;write_bandwidth_kb;write_iops;write_runtime_ms;write_slat_min_us;write_slat_max_us;write_slat_mean_us;write_slat_dev_us;write_clat_min_us;write_clat_max_us;write_clat_mean_us;write_clat_dev_us;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min_us;write_lat_max_us;write_lat_mean_us;write_lat_dev_us;write_bw_min_kb;write_bw_max_kb;write_bw_agg_pct;write_bw_mean_kb;write_bw_dev_kb;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
.fi
.P
In client/server mode terse output differs from what appears when jobs are run
projects / fio.git / blobdiff