.RS
.RS
.P
-bsrange=1k\-4k,2k\-8k
+bsrange=1k\-4k,2k\-8k or bsrange=1k:4k,2k:8k
.RE
.RE
.TP
to isolate these identifiers to specific jobs. If you want fio to use placement
identifier only at indices 0, 2 and 5 specify, you would set `fdp_pli=0,2,5`.
.TP
-.BI (io_uring_cmd)md_per_io_size \fR=\fPint
+.BI (io_uring_cmd,xnvme)md_per_io_size \fR=\fPint
Size in bytes for separate metadata buffer per IO. Default: 0.
.TP
-.BI (io_uring_cmd)pi_act \fR=\fPint
+.BI (io_uring_cmd,xnvme)pi_act \fR=\fPint
Action to take when nvme namespace is formatted with protection information.
If this is set to 1 and namespace is formatted with metadata size equal to
protection information size, fio won't use separate metadata buffer or extended
the protection information portion of metadata for write or read case
respectively. If this is set to 0, fio generates protection information for
write case and verifies for read case. Default: 1.
+
+For 16 bit CRC generation fio will use isa-l if available otherwise it will
+use the default slower generator.
+(see: https://github.com/intel/isa-l)
.TP
-.BI (io_uring_cmd)pi_chk \fR=\fPstr[,str][,str]
+.BI (io_uring_cmd,xnvme)pi_chk \fR=\fPstr[,str][,str]
Controls the protection information check. This can take one or more of these
values. Default: none.
.RS
.RE
.RE
.TP
-.BI (io_uring_cmd)apptag \fR=\fPint
+.BI (io_uring_cmd,xnvme)apptag \fR=\fPint
Specifies logical block application tag value, if namespace is formatted to use
end to end protection information. Default: 0x1234.
.TP
-.BI (io_uring_cmd)apptag_mask \fR=\fPint
+.BI (io_uring_cmd,xnvme)apptag_mask \fR=\fPint
Specifies logical block application tag mask value, if namespace is formatted
to use end to end protection information. Default: 0xffff.
.TP
+.BI (io_uring_cmd)num_range \fR=\fPint
+For trim command this will be the number of ranges to trim per I/O request.
+The number of logical blocks per range is determined by the \fBbs\fR option
+which should be a multiple of logical block size. This cannot be used with
+read or write. Note that setting this option > 1, \fBlog_offset\fR will not be
+able to log all the offsets. Default: 1.
+.TP
.BI (cpuio)cpuload \fR=\fPint
Attempt to use the specified percentage of CPU cycles. This is a mandatory
option when using cpuio I/O engine.
.TP
.B unix
UNIX domain socket.
+.TP
+.B vsock
+VSOCK protocol.
.RE
.P
-When the protocol is TCP or UDP, the port must also be given, as well as the
-hostname if the job is a TCP listener or UDP reader. For unix sockets, the
+When the protocol is TCP, UDP or VSOCK, the port must also be given, as well as the
+hostname if the job is a TCP or VSOCK listener or UDP reader. For unix sockets, the
normal \fBfilename\fR option should be used and the port is invalid.
+When the protocol is VSOCK, the \fBhostname\fR is the CID of the remote VM.
+
.RE
.TP
.BI (netsplice,net)listen
problem). Note that this option cannot reliably be used with async IO engines.
.SS "I/O rate"
.TP
+.BI thinkcycles \fR=\fPint
+Stall the job for the specified number of cycles after an I/O has completed before
+issuing the next. May be used to simulate processing being done by an application.
+This is not taken into account for the time to be waited on for \fBthinktime\fR.
+Might not have any effect on some platforms, this can be checked by trying a setting
+a high enough amount of thinkcycles.
+.TP
.BI thinktime \fR=\fPtime
Stall the job for the specified period of time after an I/O has completed before issuing the
next. May be used to simulate processing being done by an application.
entering a catch-up mode after thinktime is done.
.TP
.BI rate_cycle \fR=\fPint
-Average bandwidth for \fBrate\fR and \fBrate_min\fR over this number
+Average bandwidth for \fBrate_min\fR and \fBrate_iops_min\fR over this number
of milliseconds. Defaults to 1000.
.SS "I/O latency"
.TP
.SS "Measurements and reporting"
.TP
.BI per_job_logs \fR=\fPbool
-If set, this generates bw/clat/iops log with per file private filenames. If
-not set, jobs with identical names will share the log filename. Default:
+If set to true, fio generates bw/clat/iops logs with per job unique filenames.
+If set to false, jobs with identical names will share a log filename. Note that
+when this option is set to false log files will be opened in append mode and if
+log files already exist the previous contents will not be overwritten. Default:
true.
.TP
.BI group_reporting
Also see \fBlog_avg_msec\fR as well. Defaults to 1024.
.TP
.BI log_avg_msec \fR=\fPint
-By default, fio will log an entry in the iops, latency, or bw log for every
-I/O that completes. When writing to the disk log, that can quickly grow to a
-very large size. Setting this option makes fio average the each log entry
-over the specified period of time, reducing the resolution of the log. See
-\fBlog_max_value\fR as well. Defaults to 0, logging all entries.
-Also see \fBLOG FILE FORMATS\fR section.
+By default, fio will log an entry in the iops, latency, or bw log for every I/O
+that completes. When writing to the disk log, that can quickly grow to a very
+large size. Setting this option directs fio to instead record an average over
+the specified duration for each log entry, reducing the resolution of the log.
+When the job completes, fio will flush any accumulated latency log data, so the
+final log interval may not match the value specified by this option and there
+may even be duplicate timestamps. See \fBlog_window_value\fR as well. Defaults
+to 0, logging entries for each I/O. Also see \fBLOG FILE FORMATS\fR section.
.TP
.BI log_hist_msec \fR=\fPint
Same as \fBlog_avg_msec\fR, but logs entries for completion latency
in coarseness, fio outputs half as many bins. Defaults to 0, for which
histogram logs contain 1216 latency bins. See \fBLOG FILE FORMATS\fR section.
.TP
-.BI log_max_value \fR=\fPbool
-If \fBlog_avg_msec\fR is set, fio logs the average over that window. If
-you instead want to log the maximum value, set this option to 1. Defaults to
-0, meaning that averaged values are logged.
+.BI log_window_value \fR=\fPstr "\fR,\fP log_max_value" \fR=\fPstr
+If \fBlog_avg_msec\fR is set, fio by default logs the average over that window.
+This option determines whether fio logs the average, maximum or both the
+values over the window. This only affects the latency logging, as both average
+and maximum values for iops or bw log will be same. Accepted values are:
+.RS
+.TP
+.B avg
+Log average value over the window. The default.
+.TP
+.B max
+Log maximum value in the window.
+.TP
+.B both
+Log both average and maximum value over the window.
+.TP
+.B 0
+Backward-compatible alias for \fBavg\fR.
+.TP
+.B 1
+Backward-compatible alias for \fBmax\fR.
+.RE
.TP
.BI log_offset \fR=\fPbool
If this is set, the iolog options will include the byte offset for the I/O
(\fBprioclass\fR and \fBcmdprio_class\fR options).
.P
Fio defaults to logging every individual I/O but when windowed logging is set
-through \fBlog_avg_msec\fR, either the average (by default) or the maximum
-(\fBlog_max_value\fR is set) `value' seen over the specified period of time
-is recorded. Each `data direction' seen within the window period will aggregate
-its values in a separate row. Further, when using windowed logging the `block
-size' and `offset' entries will always contain 0.
+through \fBlog_avg_msec\fR, either the average (by default), the maximum
+(\fBlog_window_value\fR is set to max) `value' seen over the specified period of
+time, or both the average `value' and maximum `value1' (\fBlog_window_value\fR is
+set to both) is recorded. The log file format when both the values are reported
+takes this form:
+.RS
+.P
+time (msec), value, value1, data direction, block size (bytes), offset (bytes),
+command priority
+.RE
+.P
+Each `data direction' seen within the window period will aggregate its values
+in a separate row. Further, when using windowed logging the `block size' and
+`offset' entries will always contain 0.
.SH CLIENT / SERVER
Normally fio is invoked as a stand-alone application on the machine where the
I/O workload should be generated. However, the backend and frontend of fio can
projects / fio.git / blobdiff