calls will be excluded from other uses. Fio will manually clear it from the
CPU mask of other jobs.
+.. option:: job_start_clock_id=int
+ The clock_id passed to the call to `clock_gettime` used to record job_start
+ in the `json` output format. Default is 0, or CLOCK_REALTIME.
+
Target file/device
~~~~~~~~~~~~~~~~~~
On Windows, disk devices are accessed as :file:`\\\\.\\PhysicalDrive0` for
the first device, :file:`\\\\.\\PhysicalDrive1` for the second etc.
- Note: Windows and FreeBSD prevent write access to areas
+ Note: Windows and FreeBSD (refer to geom(4)) prevent write access to areas
of the disk containing in-use data (e.g. filesystems).
The filename "`-`" is a reserved name, meaning *stdin* or *stdout*. Which
cmdprio_bssplit=blocksize/percentage/class/level/hint:...
- This is an extension of the second accepted format that allows to also
- specify a priority hint.
+ This is an extension of the second accepted format that allows one to
+ also specify a priority hint.
For all formats, only the read and write data directions are supported,
values for trim IOs are ignored. This option is mutually exclusive with
Size in bytes for separate metadata buffer per IO. Default: 0.
+.. option:: pi_act=int : [io_uring_cmd]
+
+ Action to take when nvme namespace is formatted with protection
+ information. If this is set to 1 and namespace is formatted with
+ metadata size equal to protection information size, fio won't use
+ separate metadata buffer or extended logical block. If this is set to
+ 1 and namespace is formatted with metadata size greater than protection
+ information size, fio will not generate or verify the protection
+ information portion of metadata for write or read case respectively.
+ If this is set to 0, fio generates protection information for
+ write case and verifies for read case. Default: 1.
+
+ For 16 bit CRC generation fio will use isa-l if available otherwise
+ it will use the default slower generator.
+ (see: https://github.com/intel/isa-l)
+
+.. option:: pi_chk=str[,str][,str] : [io_uring_cmd]
+
+ Controls the protection information check. This can take one or more
+ of these values. Default: none.
+
+ **GUARD**
+ Enables protection information checking of guard field.
+ **REFTAG**
+ Enables protection information checking of logical block
+ reference tag field.
+ **APPTAG**
+ Enables protection information checking of application tag field.
+
+.. option:: apptag=int : [io_uring_cmd]
+
+ Specifies logical block application tag value, if namespace is
+ formatted to use end to end protection information. Default: 0x1234.
+
+.. option:: apptag_mask=int : [io_uring_cmd]
+
+ Specifies logical block application tag mask value, if namespace is
+ formatted to use end to end protection information. Default: 0xffff.
+
.. option:: cpuload=int : [cpuio]
Attempt to use the specified percentage of CPU cycles. This is a mandatory
**hugepage**
Use hugepages, instead of existing posix memory backend. The
memory backend uses hugetlbfs. This require users to allocate
- hugepages, mount hugetlbfs and set an enviornment variable for
+ hugepages, mount hugetlbfs and set an environment variable for
XNVME_HUGETLB_PATH.
**spdk**
Uses SPDK's memory allocator.
creating but before connecting the libblkio instance. Each property must
have the format ``<name>=<value>``. Colons can be escaped as ``\:``.
These are set after the engine sets any other properties, so those can
- be overriden. Available properties depend on the libblkio version in use
+ be overridden. Available properties depend on the libblkio version in use
and are listed at
https://libblkio.gitlab.io/libblkio/blkio.html#properties
connecting but before starting the libblkio instance. Each property must
have the format ``<name>=<value>``. Colons can be escaped as ``\:``.
These are set after the engine sets any other properties, so those can
- be overriden. Available properties depend on the libblkio version in use
+ be overridden. Available properties depend on the libblkio version in use
and are listed at
https://libblkio.gitlab.io/libblkio/blkio.html#properties
I/O rate
~~~~~~~~
+.. option:: thinkcycles=int
+
+ Stall the job for the specified number of cycles after an I/O has completed before
+ issuing the next. May be used to simulate processing being done by an application.
+ This is not taken into account for the time to be waited on for :option:`thinktime`.
+ Might not have any effect on some platforms, this can be checked by trying a setting
+ a high enough amount of thinkcycles.
+
.. option:: thinktime=time
Stall the job for the specified period of time after an I/O has completed before issuing the
By default, fio will continue running all other jobs when one job finishes.
Sometimes this is not the desired action. Setting ``exitall`` will
instead make fio terminate all jobs in the same group. The option
- ``exit_what`` allows to control which jobs get terminated when ``exitall`` is
- enabled. The default is ``group`` and does not change the behaviour of
+ ``exit_what`` allows one to control which jobs get terminated when ``exitall``
+ is enabled. The default is ``group`` and does not change the behaviour of
``exitall``. The setting ``all`` terminates all jobs. The setting ``stonewall``
terminates all currently running jobs across all groups and continues execution
with the next stonewalled group.
.. option:: per_job_logs=bool
- If set, this generates bw/clat/iops log with per file private filenames. If
- not set, jobs with identical names will share the log filename. Default:
- true.
+ If set to true, fio generates bw/clat/iops logs with per job unique
+ filenames. If set to false, jobs with identical names will share a log
+ filename. Note that when this option is set to false log files will be
+ opened in append mode and if log files already exist the previous
+ contents will not be overwritten. Default: true.
.. option:: group_reporting
same reporting group, unless if separated by a :option:`stonewall`, or by
using :option:`new_group`.
+ NOTE: When :option:`group_reporting` is used along with `json` output,
+ there are certain per-job properties which can be different between jobs
+ but do not have a natural group-level equivalent. Examples include
+ `kb_base`, `unit_base`, `sig_figs`, `thread_number`, `pid`, and
+ `job_start`. For these properties, the values for the first job are
+ recorded for the group.
+
.. option:: new_group
Start a new reporting group. See: :option:`group_reporting`. If not given,
.. option:: log_unix_epoch=bool
- If set, fio will log Unix timestamps to the log files produced by enabling
- write_type_log for each log type, instead of the default zero-based
- timestamps.
+ Backwards compatible alias for log_alternate_epoch.
.. option:: log_alternate_epoch=bool
.. option:: log_alternate_epoch_clock_id=int
- Specifies the clock_id to be used by clock_gettime to obtain the alternate epoch
- if either log_unix_epoch or log_alternate_epoch are true. Otherwise has no
- effect. Default value is 0, or CLOCK_REALTIME.
+ Specifies the clock_id to be used by clock_gettime to obtain the alternate
+ epoch if log_alternate_epoch is true. Otherwise has no effect. Default
+ value is 0, or CLOCK_REALTIME.
.. option:: block_error_percentiles=bool
server. The `server` string follows the same format as it does on the server
side, to allow IP/hostname/socket and port strings.
+Note that all job options must be defined in job files when running fio as a
+client. Any job options specified in `remote-args` will be ignored.
+
Fio can connect to multiple servers this way::
fio --client=<server1> <job file(s)> --client=<server2> <job file(s)>
projects / fio.git / blobdiff