1 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
3 * This program is free software; you can redistribute it and/or modify it
4 * under the terms of the GNU General Public License as published by the Free
5 * Software Foundation, version 2.
7 * Copyright (C) 2005-9 DiBcom, SA et al
11 #include "dib3000mc.h"
18 #include "tuner-xc2028.h"
27 static int force_lna_activation;
28 module_param(force_lna_activation, int, 0644);
29 MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
30 "if applicable for the device (default: 0=automatic/off).");
32 struct dib0700_adapter_state {
33 int (*set_param_save) (struct dvb_frontend *);
34 const struct firmware *frontend_firmware;
35 struct dib7000p_ops dib7000p_ops;
36 struct dib8000_ops dib8000_ops;
39 /* Hauppauge Nova-T 500 (aka Bristol)
40 * has a LNA on GPIO0 which is enabled by setting 1 */
41 static struct mt2060_config bristol_mt2060_config[2] = {
51 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
52 .band_caps = BAND_VHF | BAND_UHF,
53 .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
73 static struct dib3000mc_config bristol_dib3000mc_config[2] = {
74 { .agc = &bristol_dib3000p_mt2060_agc_config,
76 .ln_adc_level = 0x1cc7,
77 .output_mpeg2_in_188_bytes = 1,
79 { .agc = &bristol_dib3000p_mt2060_agc_config,
81 .ln_adc_level = 0x1cc7,
82 .output_mpeg2_in_188_bytes = 1,
86 static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
88 struct dib0700_state *st = adap->dev->priv;
90 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
91 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
92 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
93 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
95 if (force_lna_activation)
96 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
98 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
100 if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
101 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
105 st->mt2060_if1[adap->id] = 1220;
106 return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
107 (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
110 static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
112 struct i2c_msg msg[2] = {
113 { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
114 { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
116 if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
120 static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
122 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
123 struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
126 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
127 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
128 if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
130 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
131 &bristol_mt2060_config[adap->id], if1) == NULL ?
135 /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
138 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
142 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
143 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
144 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
145 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
180 BAND_VHF | BAND_LBAND,
182 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
183 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
184 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
185 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
222 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
226 (3 << 14) | (1 << 12) | (524 << 0),
231 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
232 { .output_mpeg2_in_188_bytes = 1,
233 .hostbus_diversity = 1,
234 .tuner_is_baseband = 1,
236 .agc_config_count = 2,
237 .agc = stk7700d_7000p_mt2266_agc_config,
238 .bw = &stk7700d_mt2266_pll_config,
240 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
241 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
242 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
244 { .output_mpeg2_in_188_bytes = 1,
245 .hostbus_diversity = 1,
246 .tuner_is_baseband = 1,
248 .agc_config_count = 2,
249 .agc = stk7700d_7000p_mt2266_agc_config,
250 .bw = &stk7700d_mt2266_pll_config,
252 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
253 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
254 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
258 static struct mt2266_config stk7700d_mt2266_config[2] = {
259 { .i2c_address = 0x60
261 { .i2c_address = 0x60
265 static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
267 struct dib0700_adapter_state *state = adap->priv;
269 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
273 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
275 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
276 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
277 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
278 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
280 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
282 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
283 stk7700d_dib7000p_mt2266_config)
285 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
286 dvb_detach(&state->dib7000p_ops);
291 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
292 0x80 + (adap->id << 1),
293 &stk7700d_dib7000p_mt2266_config[adap->id]);
295 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
298 static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
300 struct dib0700_adapter_state *state = adap->priv;
302 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
306 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
308 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
309 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
310 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
311 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
313 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
315 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
316 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
317 stk7700d_dib7000p_mt2266_config)
319 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
320 dvb_detach(&state->dib7000p_ops);
325 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
326 0x80 + (adap->id << 1),
327 &stk7700d_dib7000p_mt2266_config[adap->id]);
329 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
332 static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
334 struct i2c_adapter *tun_i2c;
335 struct dib0700_adapter_state *state = adap->priv;
337 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
338 DIBX000_I2C_INTERFACE_TUNER, 1);
339 return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
340 &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
343 /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
344 static struct dibx000_agc_config xc3028_agc_config = {
345 BAND_VHF | BAND_UHF, /* band_caps */
347 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
348 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
349 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
350 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
351 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
354 21, /* time_stabiliz */
366 39718, /* agc2_max */
375 29, /* agc2_slope1 */
376 29, /* agc2_slope2 */
383 1, /* perform_agc_softsplit */
386 /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
387 static struct dibx000_bandwidth_config xc3028_bw_config = {
388 60000, 30000, /* internal, sampling */
389 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
390 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
392 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
393 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
395 30000000, /* xtal_hz */
398 static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
399 .output_mpeg2_in_188_bytes = 1,
400 .tuner_is_baseband = 1,
402 .agc_config_count = 1,
403 .agc = &xc3028_agc_config,
404 .bw = &xc3028_bw_config,
406 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
407 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
408 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
411 static int stk7700ph_xc3028_callback(void *ptr, int component,
412 int command, int arg)
414 struct dvb_usb_adapter *adap = ptr;
415 struct dib0700_adapter_state *state = adap->priv;
418 case XC2028_TUNER_RESET:
419 /* Send the tuner in then out of reset */
420 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
422 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
424 case XC2028_RESET_CLK:
427 err("%s: unknown command %d, arg %d\n", __func__,
434 static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
435 .fname = XC2028_DEFAULT_FIRMWARE,
437 .demod = XC3028_FE_DIBCOM52,
440 static struct xc2028_config stk7700ph_xc3028_config = {
442 .ctrl = &stk7700ph_xc3028_ctrl,
445 static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
447 struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
448 struct dib0700_adapter_state *state = adap->priv;
450 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
453 if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
454 desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
455 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
457 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
459 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
460 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
461 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
462 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
464 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
466 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
469 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
470 &stk7700ph_dib7700_xc3028_config) != 0) {
471 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
473 dvb_detach(&state->dib7000p_ops);
477 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
478 &stk7700ph_dib7700_xc3028_config);
480 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
483 static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
485 struct i2c_adapter *tun_i2c;
486 struct dib0700_adapter_state *state = adap->priv;
488 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
489 DIBX000_I2C_INTERFACE_TUNER, 1);
491 stk7700ph_xc3028_config.i2c_adap = tun_i2c;
493 /* FIXME: generalize & move to common area */
494 adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
496 return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
497 == NULL ? -ENODEV : 0;
500 #define DEFAULT_RC_INTERVAL 50
502 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
504 /* Number of keypresses to ignore before start repeating */
505 #define RC_REPEAT_DELAY 6
508 * This function is used only when firmware is < 1.20 version. Newer
509 * firmwares use bulk mode, with functions implemented at dib0700_core,
510 * at dib0700_rc_urb_completion()
512 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
515 enum rc_type protocol;
519 struct dib0700_state *st = d->priv;
521 if (st->fw_version >= 0x10200) {
522 /* For 1.20 firmware , We need to keep the RC polling
523 callback so we can reuse the input device setup in
524 dvb-usb-remote.c. However, the actual work is being done
525 in the bulk URB completion handler. */
529 i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
531 err("RC Query Failed");
535 /* losing half of KEY_0 events from Philipps rc5 remotes.. */
536 if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
539 /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
541 dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
543 switch (d->props.rc.core.protocol) {
545 /* NEC protocol sends repeat code as 0 0 0 FF */
546 if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
548 rc_repeat(d->rc_dev);
552 protocol = RC_TYPE_NEC;
553 scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]);
558 /* RC-5 protocol changes toggle bit on new keypress */
559 protocol = RC_TYPE_RC5;
560 scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]);
565 rc_keydown(d->rc_dev, protocol, scancode, toggle);
569 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
570 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
573 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
574 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
575 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
576 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
616 static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
619 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
620 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
621 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
622 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
662 static struct dibx000_bandwidth_config stk7700p_pll_config = {
666 (3 << 14) | (1 << 12) | (524 << 0),
672 static struct dib7000m_config stk7700p_dib7000m_config = {
674 .output_mpeg2_in_188_bytes = 1,
677 .agc_config_count = 1,
678 .agc = &stk7700p_7000m_mt2060_agc_config,
679 .bw = &stk7700p_pll_config,
681 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
682 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
683 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
686 static struct dib7000p_config stk7700p_dib7000p_config = {
687 .output_mpeg2_in_188_bytes = 1,
689 .agc_config_count = 1,
690 .agc = &stk7700p_7000p_mt2060_agc_config,
691 .bw = &stk7700p_pll_config,
693 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
694 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
695 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
698 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
700 struct dib0700_state *st = adap->dev->priv;
701 struct dib0700_adapter_state *state = adap->priv;
703 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
706 /* unless there is no real power management in DVB - we leave the device on GPIO6 */
708 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
709 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
711 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
712 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
714 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
715 dib0700_ctrl_clock(adap->dev, 72, 1);
716 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
718 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
720 st->mt2060_if1[0] = 1220;
722 if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap)) {
723 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
724 st->is_dib7000pc = 1;
726 dvb_detach(&state->dib7000p_ops);
727 memset(&state->dib7000p_ops, 0, sizeof(state->dib7000p_ops));
728 adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
731 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
734 static struct mt2060_config stk7700p_mt2060_config = {
738 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
740 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
741 struct dib0700_state *st = adap->dev->priv;
742 struct i2c_adapter *tun_i2c;
743 struct dib0700_adapter_state *state = adap->priv;
747 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
748 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
749 if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
751 if (st->is_dib7000pc)
752 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
754 tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
756 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
757 if1) == NULL ? -ENODEV : 0;
760 /* DIB7070 generic */
761 static struct dibx000_agc_config dib7070_agc_config = {
762 BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
763 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
764 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
765 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
766 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
803 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
805 struct dvb_usb_adapter *adap = fe->dvb->priv;
806 struct dib0700_adapter_state *state = adap->priv;
808 deb_info("reset: %d", onoff);
809 return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff);
812 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
814 struct dvb_usb_adapter *adap = fe->dvb->priv;
815 struct dib0700_adapter_state *state = adap->priv;
817 deb_info("sleep: %d", onoff);
818 return state->dib7000p_ops.set_gpio(fe, 9, 0, onoff);
821 static struct dib0070_config dib7070p_dib0070_config[2] = {
823 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
824 .reset = dib7070_tuner_reset,
825 .sleep = dib7070_tuner_sleep,
827 .clock_pad_drive = 4,
830 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
831 .reset = dib7070_tuner_reset,
832 .sleep = dib7070_tuner_sleep,
838 static struct dib0070_config dib7770p_dib0070_config = {
839 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
840 .reset = dib7070_tuner_reset,
841 .sleep = dib7070_tuner_sleep,
843 .clock_pad_drive = 0,
848 static int dib7070_set_param_override(struct dvb_frontend *fe)
850 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
851 struct dvb_usb_adapter *adap = fe->dvb->priv;
852 struct dib0700_adapter_state *state = adap->priv;
855 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
857 case BAND_VHF: offset = 950; break;
859 default: offset = 550; break;
861 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
862 state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
863 return state->set_param_save(fe);
866 static int dib7770_set_param_override(struct dvb_frontend *fe)
868 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
869 struct dvb_usb_adapter *adap = fe->dvb->priv;
870 struct dib0700_adapter_state *state = adap->priv;
873 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
876 state->dib7000p_ops.set_gpio(fe, 0, 0, 1);
881 state->dib7000p_ops.set_gpio(fe, 0, 0, 0);
885 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
886 state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
887 return state->set_param_save(fe);
890 static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
892 struct dib0700_adapter_state *st = adap->priv;
893 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
894 DIBX000_I2C_INTERFACE_TUNER, 1);
896 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
897 &dib7770p_dib0070_config) == NULL)
900 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
901 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
905 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
907 struct dib0700_adapter_state *st = adap->priv;
908 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
911 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
914 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
918 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
919 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
923 static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
926 struct dib0700_adapter_state *state = adapter->priv;
927 struct dib0700_state *st = adapter->dev->priv;
929 if (st->is_dib7000pc)
930 return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
931 return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
934 static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
936 struct dib0700_state *st = adapter->dev->priv;
937 struct dib0700_adapter_state *state = adapter->priv;
938 if (st->is_dib7000pc)
939 return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
940 return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
943 static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
945 struct dib0700_adapter_state *state = adapter->priv;
946 return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
949 static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
951 struct dib0700_adapter_state *state = adapter->priv;
952 return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
955 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
959 (3 << 14) | (1 << 12) | (524 << 0),
965 static struct dib7000p_config dib7070p_dib7000p_config = {
966 .output_mpeg2_in_188_bytes = 1,
968 .agc_config_count = 1,
969 .agc = &dib7070_agc_config,
970 .bw = &dib7070_bw_config_12_mhz,
971 .tuner_is_baseband = 1,
974 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
975 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
976 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
978 .hostbus_diversity = 1,
982 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
984 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
985 struct dib0700_adapter_state *state = adap->priv;
987 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
990 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
991 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
992 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
994 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
996 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
997 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
998 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
999 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1001 dib0700_ctrl_clock(adap->dev, 72, 1);
1004 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1006 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1008 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1009 &dib7070p_dib7000p_config) != 0) {
1010 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
1012 dvb_detach(&state->dib7000p_ops);
1016 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
1017 &dib7070p_dib7000p_config);
1018 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1022 static struct dib7000p_config dib7770p_dib7000p_config = {
1023 .output_mpeg2_in_188_bytes = 1,
1025 .agc_config_count = 1,
1026 .agc = &dib7070_agc_config,
1027 .bw = &dib7070_bw_config_12_mhz,
1028 .tuner_is_baseband = 1,
1031 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1032 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1033 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1035 .hostbus_diversity = 1,
1036 .enable_current_mirror = 1,
1037 .disable_sample_and_hold = 0,
1040 static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
1042 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
1043 struct dib0700_adapter_state *state = adap->priv;
1045 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
1048 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
1049 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
1050 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1052 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1054 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1055 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1056 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1057 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1059 dib0700_ctrl_clock(adap->dev, 72, 1);
1062 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1064 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1066 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1067 &dib7770p_dib7000p_config) != 0) {
1068 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
1070 dvb_detach(&state->dib7000p_ops);
1074 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80,
1075 &dib7770p_dib7000p_config);
1076 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1079 /* DIB807x generic */
1080 static struct dibx000_agc_config dib807x_agc_config[2] = {
1083 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1084 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1085 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
1086 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1088 (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
1089 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1090 (0 << 0), /* setup*/
1093 10, /* time_stabiliz*/
1103 65535, /* agc1_max*/
1106 65535, /* agc2_max*/
1112 206, /* agc1_slope1*/
1113 255, /* agc1_slope2*/
1116 88, /* agc2_slope1*/
1117 90, /* agc2_slope2*/
1124 0, /* perform_agc_softsplit*/
1127 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1128 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1129 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1130 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1132 (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
1133 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1134 (0 << 0), /* setup */
1137 10, /* time_stabiliz*/
1147 65535, /* agc1_max*/
1150 65535, /* agc2_max*/
1156 206, /* agc1_slope1*/
1157 255, /* agc1_slope2*/
1160 88, /* agc2_slope1*/
1161 90, /* agc2_slope2*/
1168 0, /* perform_agc_softsplit*/
1172 static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
1173 60000, 15000, /* internal, sampling*/
1174 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
1175 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
1177 (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
1178 (0 << 25) | 0, /* ifreq = 0.000000 MHz*/
1180 12000000, /* xtal_hz*/
1183 static struct dib8000_config dib807x_dib8000_config[2] = {
1185 .output_mpeg2_in_188_bytes = 1,
1187 .agc_config_count = 2,
1188 .agc = dib807x_agc_config,
1189 .pll = &dib807x_bw_config_12_mhz,
1190 .tuner_is_baseband = 1,
1192 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1193 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1194 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1196 .hostbus_diversity = 1,
1198 .agc_control = &dib0070_ctrl_agc_filter,
1199 .output_mode = OUTMODE_MPEG2_FIFO,
1202 .output_mpeg2_in_188_bytes = 1,
1204 .agc_config_count = 2,
1205 .agc = dib807x_agc_config,
1206 .pll = &dib807x_bw_config_12_mhz,
1207 .tuner_is_baseband = 1,
1209 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1210 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1211 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1213 .hostbus_diversity = 1,
1214 .agc_control = &dib0070_ctrl_agc_filter,
1215 .output_mode = OUTMODE_MPEG2_FIFO,
1220 static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
1222 struct dvb_usb_adapter *adap = fe->dvb->priv;
1223 struct dib0700_adapter_state *state = adap->priv;
1225 return state->dib8000_ops.set_gpio(fe, 5, 0, !onoff);
1228 static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
1230 struct dvb_usb_adapter *adap = fe->dvb->priv;
1231 struct dib0700_adapter_state *state = adap->priv;
1233 return state->dib8000_ops.set_gpio(fe, 0, 0, onoff);
1236 static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
1241 static struct dib0070_config dib807x_dib0070_config[2] = {
1243 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1244 .reset = dib80xx_tuner_reset,
1245 .sleep = dib80xx_tuner_sleep,
1247 .clock_pad_drive = 4,
1249 .force_crystal_mode = 1,
1250 .enable_third_order_filter = 1,
1252 .wbd_gain = dib8070_wbd_gain_cfg,
1253 .osc_buffer_state = 0,
1254 .freq_offset_khz_uhf = -100,
1255 .freq_offset_khz_vhf = -100,
1257 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1258 .reset = dib80xx_tuner_reset,
1259 .sleep = dib80xx_tuner_sleep,
1261 .clock_pad_drive = 2,
1263 .force_crystal_mode = 1,
1264 .enable_third_order_filter = 1,
1266 .wbd_gain = dib8070_wbd_gain_cfg,
1267 .osc_buffer_state = 0,
1268 .freq_offset_khz_uhf = -25,
1269 .freq_offset_khz_vhf = -25,
1273 static int dib807x_set_param_override(struct dvb_frontend *fe)
1275 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
1276 struct dvb_usb_adapter *adap = fe->dvb->priv;
1277 struct dib0700_adapter_state *state = adap->priv;
1279 u16 offset = dib0070_wbd_offset(fe);
1280 u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
1285 case BAND_UHF: /* fall-thru wanted */
1287 offset += 250; break;
1289 deb_info("WBD for DiB8000: %d\n", offset);
1290 state->dib8000_ops.set_wbd_ref(fe, offset);
1292 return state->set_param_save(fe);
1295 static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
1297 struct dib0700_adapter_state *st = adap->priv;
1298 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe,
1299 DIBX000_I2C_INTERFACE_TUNER, 1);
1301 if (adap->id == 0) {
1302 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1303 &dib807x_dib0070_config[0]) == NULL)
1306 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1307 &dib807x_dib0070_config[1]) == NULL)
1311 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1312 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
1316 static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
1319 struct dib0700_adapter_state *state = adapter->priv;
1321 return state->dib8000_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
1324 static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
1327 struct dib0700_adapter_state *state = adapter->priv;
1329 return state->dib8000_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
1333 static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
1335 struct dib0700_adapter_state *state = adap->priv;
1337 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1340 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1342 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1343 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1344 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1346 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1348 dib0700_ctrl_clock(adap->dev, 72, 1);
1351 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1353 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1355 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1358 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
1359 &dib807x_dib8000_config[0]);
1361 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1365 static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
1367 struct dib0700_adapter_state *state = adap->priv;
1369 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1372 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1374 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1376 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1377 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1378 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1380 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1382 dib0700_ctrl_clock(adap->dev, 72, 1);
1385 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1387 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1389 /* initialize IC 0 */
1390 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0);
1392 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80,
1393 &dib807x_dib8000_config[0]);
1395 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1398 static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
1400 struct dib0700_adapter_state *state = adap->priv;
1402 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1405 /* initialize IC 1 */
1406 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0);
1408 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82,
1409 &dib807x_dib8000_config[1]);
1411 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1415 static struct dibx000_agc_config dib8090_agc_config[2] = {
1417 .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
1418 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1419 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1420 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1421 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1422 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1425 .time_stabiliz = 10,
1456 .perform_agc_softsplit = 0,
1459 .band_caps = BAND_CBAND,
1460 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1461 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1462 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1463 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1464 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1467 .time_stabiliz = 10,
1498 .perform_agc_softsplit = 0,
1502 static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
1514 .IO_CLK_en_core = 1,
1518 .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0),
1520 .ifreq = (0 << 25) | 0,
1523 .xtal_hz = 12000000,
1526 static int dib8090_get_adc_power(struct dvb_frontend *fe)
1528 struct dvb_usb_adapter *adap = fe->dvb->priv;
1529 struct dib0700_adapter_state *state = adap->priv;
1531 return state->dib8000_ops.get_adc_power(fe, 1);
1534 static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart)
1536 deb_info("AGC control callback: %i\n", restart);
1537 dib0090_dcc_freq(fe, restart);
1539 if (restart == 0) /* before AGC startup */
1540 dib0090_set_dc_servo(fe, 1);
1543 static struct dib8000_config dib809x_dib8000_config[2] = {
1545 .output_mpeg2_in_188_bytes = 1,
1547 .agc_config_count = 2,
1548 .agc = dib8090_agc_config,
1549 .agc_control = dib8090_agc_control,
1550 .pll = &dib8090_pll_config_12mhz,
1551 .tuner_is_baseband = 1,
1553 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1554 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1555 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1557 .hostbus_diversity = 1,
1559 .output_mode = OUTMODE_MPEG2_FIFO,
1561 .diversity_delay = 48,
1564 .output_mpeg2_in_188_bytes = 1,
1566 .agc_config_count = 2,
1567 .agc = dib8090_agc_config,
1568 .agc_control = dib8090_agc_control,
1569 .pll = &dib8090_pll_config_12mhz,
1570 .tuner_is_baseband = 1,
1572 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1573 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1574 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1576 .hostbus_diversity = 1,
1578 .output_mode = OUTMODE_DIVERSITY,
1580 .diversity_delay = 1,
1585 static struct dib0090_wbd_slope dib8090_wbd_table[] = {
1586 /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
1587 { 120, 0, 500, 0, 500, 4 }, /* CBAND */
1588 { 170, 0, 450, 0, 450, 4 }, /* CBAND */
1589 { 380, 48, 373, 28, 259, 6 }, /* VHF */
1590 { 860, 34, 700, 36, 616, 6 }, /* high UHF */
1591 { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */
1594 static struct dib0090_config dib809x_dib0090_config = {
1598 .io.pll_loopdiv = 20,
1599 .io.adc_clock_ratio = 8,
1600 .io.pll_int_loop_filt = 0,
1601 .io.clock_khz = 12000,
1602 .reset = dib80xx_tuner_reset,
1603 .sleep = dib80xx_tuner_sleep,
1606 .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
1609 .get_adc_power = dib8090_get_adc_power,
1610 .freq_offset_khz_uhf = -63,
1611 .freq_offset_khz_vhf = -143,
1612 .wbd = dib8090_wbd_table,
1613 .fref_clock_ratio = 6,
1616 static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe)
1618 u8 optimal_pll_ratio = 20;
1619 u32 freq_adc, ratio, rest, max = 0;
1622 for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) {
1623 freq_adc = 12 * pll_ratio * (1 << 8) / 16;
1624 ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc;
1625 rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc;
1627 if (rest > freq_adc / 2)
1628 rest = freq_adc - rest;
1629 deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest);
1630 if ((rest > max) && (rest > 717)) {
1631 optimal_pll_ratio = pll_ratio;
1635 deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio);
1637 return optimal_pll_ratio;
1640 static int dib8096_set_param_override(struct dvb_frontend *fe)
1642 struct dvb_usb_adapter *adap = fe->dvb->priv;
1643 struct dib0700_adapter_state *state = adap->priv;
1644 u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
1645 u16 target, ltgain, rf_gain_limit;
1648 enum frontend_tune_state tune_state = CT_SHUTDOWN;
1652 deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
1654 state->dib8000_ops.set_gpio(fe, 3, 0, 1);
1657 state->dib8000_ops.set_gpio(fe, 3, 0, 0);
1661 ret = state->set_param_save(fe);
1665 if (fe->dtv_property_cache.bandwidth_hz != 6000000) {
1666 deb_info("only 6MHz bandwidth is supported\n");
1670 /** Update PLL if needed ratio **/
1671 state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
1673 /** Get optimize PLL ratio to remove spurious **/
1674 pll_ratio = dib8090_compute_pll_parameters(fe);
1675 if (pll_ratio == 17)
1677 else if (pll_ratio == 18)
1679 else if (pll_ratio == 19)
1684 /** Update ratio **/
1685 state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
1687 state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
1689 if (band != BAND_CBAND) {
1690 /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */
1691 target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
1692 state->dib8000_ops.set_wbd_ref(fe, target);
1695 if (band == BAND_CBAND) {
1696 deb_info("tuning in CBAND - soft-AGC startup\n");
1697 dib0090_set_tune_state(fe, CT_AGC_START);
1700 ret = dib0090_gain_control(fe);
1702 tune_state = dib0090_get_tune_state(fe);
1703 if (tune_state == CT_AGC_STEP_0)
1704 state->dib8000_ops.set_gpio(fe, 6, 0, 1);
1705 else if (tune_state == CT_AGC_STEP_1) {
1706 dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain);
1707 if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */
1708 state->dib8000_ops.set_gpio(fe, 6, 0, 0);
1710 } while (tune_state < CT_AGC_STOP);
1712 deb_info("switching to PWM AGC\n");
1713 dib0090_pwm_gain_reset(fe);
1714 state->dib8000_ops.pwm_agc_reset(fe);
1715 state->dib8000_ops.set_tune_state(fe, CT_DEMOD_START);
1717 /* for everything else than CBAND we are using standard AGC */
1718 deb_info("not tuning in CBAND - standard AGC startup\n");
1719 dib0090_pwm_gain_reset(fe);
1725 static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
1727 struct dib0700_adapter_state *st = adap->priv;
1728 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1730 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1733 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1734 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1738 static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
1740 struct dib0700_adapter_state *state = adap->priv;
1742 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1745 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1747 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1748 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1749 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1751 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1753 dib0700_ctrl_clock(adap->dev, 72, 1);
1756 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1758 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1760 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0);
1762 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1764 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1767 static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
1769 struct dib0700_adapter_state *st = adap->priv;
1770 struct i2c_adapter *tun_i2c;
1771 struct dvb_frontend *fe_slave = st->dib8000_ops.get_slave_frontend(adap->fe_adap[0].fe, 1);
1774 tun_i2c = st->dib8000_ops.get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
1775 if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
1777 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
1778 fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
1780 tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1781 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1784 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1785 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1790 static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
1792 struct dvb_frontend *fe_slave;
1793 struct dib0700_adapter_state *state = adap->priv;
1795 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1798 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1800 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1802 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1803 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1804 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1806 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1808 dib0700_ctrl_clock(adap->dev, 72, 1);
1811 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1813 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1815 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0);
1817 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1818 if (adap->fe_adap[0].fe == NULL)
1821 /* Needed to increment refcount */
1822 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
1825 fe_slave = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
1826 state->dib8000_ops.set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
1828 return fe_slave == NULL ? -ENODEV : 0;
1832 static struct dibx000_agc_config dib8096p_agc_config[2] = {
1834 .band_caps = BAND_UHF,
1835 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1836 P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1837 P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1838 P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1840 .setup = (0 << 15) | (0 << 14) | (5 << 11)
1841 | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
1842 | (0 << 4) | (5 << 1) | (0 << 0),
1845 .time_stabiliz = 10,
1876 .perform_agc_softsplit = 0,
1878 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
1879 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1880 P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1881 P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1882 P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1884 .setup = (0 << 15) | (0 << 14) | (5 << 11)
1885 | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
1886 | (0 << 4) | (5 << 1) | (0 << 0),
1889 .time_stabiliz = 10,
1920 .perform_agc_softsplit = 0,
1924 static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
1928 (3 << 14) | (1 << 12) | (524 << 0),
1934 static struct dib8000_config tfe8096p_dib8000_config = {
1935 .output_mpeg2_in_188_bytes = 1,
1936 .hostbus_diversity = 1,
1939 .agc_config_count = 2,
1940 .agc = dib8096p_agc_config,
1941 .pll = &dib8096p_clock_config_12_mhz,
1943 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1944 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1945 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1947 .agc_control = NULL,
1948 .diversity_delay = 48,
1949 .output_mode = OUTMODE_MPEG2_FIFO,
1953 static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
1954 { 380, 81, 850, 64, 540, 4},
1955 { 860, 51, 866, 21, 375, 4},
1956 {1700, 0, 250, 0, 100, 6},
1957 {2600, 0, 250, 0, 100, 6},
1958 { 0xFFFF, 0, 0, 0, 0, 0},
1961 static struct dib0090_config tfe8096p_dib0090_config = {
1962 .io.clock_khz = 12000,
1966 .io.pll_loopdiv = 6,
1967 .io.adc_clock_ratio = 0,
1968 .io.pll_int_loop_filt = 0,
1970 .freq_offset_khz_uhf = -143,
1971 .freq_offset_khz_vhf = -143,
1973 .get_adc_power = dib8090_get_adc_power,
1978 .wbd_vhf_offset = 0,
1979 .wbd_cband_offset = 0,
1983 .fref_clock_ratio = 1,
1985 .ls_cfg_pad_drv = 0,
1989 .force_cband_input = 0,
1992 struct dibx090p_adc {
1993 u32 freq; /* RF freq MHz */
1994 u32 timf; /* New Timf */
1995 u32 pll_loopdiv; /* New prediv */
1996 u32 pll_prediv; /* New loopdiv */
1999 struct dibx090p_best_adc {
2005 static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc)
2007 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
2009 u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */
2010 u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */
2011 u32 fmem_max = 140000; /* 140MHz max SDRAM freq */
2012 u32 fdem_min = 66000;
2013 u32 fcp = 0, fs = 0, fdem = 0, fmem = 0;
2014 u32 harmonic_id = 0;
2017 adc->pll_loopdiv = loopdiv;
2018 adc->pll_prediv = prediv;
2020 deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz);
2022 /* Find Min and Max prediv */
2023 while ((xtal / max_prediv) >= fcp_min)
2027 min_prediv = max_prediv;
2028 while ((xtal / min_prediv) <= fcp_max) {
2030 if (min_prediv == 1)
2033 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2037 for (prediv = min_prediv; prediv < max_prediv; prediv++) {
2038 fcp = xtal / prediv;
2039 if (fcp > fcp_min && fcp < fcp_max) {
2040 for (loopdiv = 1; loopdiv < 64; loopdiv++) {
2041 fmem = ((xtal/prediv) * loopdiv);
2045 /* test min/max system restrictions */
2046 if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) {
2048 /* test fs harmonics positions */
2049 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) {
2050 if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) {
2057 adc->pll_loopdiv = loopdiv;
2058 adc->pll_prediv = prediv;
2059 adc->timf = (4260880253U / fdem) * (1 << 8);
2060 adc->timf += ((4260880253U % fdem) << 8) / fdem;
2062 deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf);
2072 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2077 static int dib8096p_agc_startup(struct dvb_frontend *fe)
2079 struct dvb_usb_adapter *adap = fe->dvb->priv;
2080 struct dib0700_adapter_state *state = adap->priv;
2081 struct dibx000_bandwidth_config pll;
2082 struct dibx090p_best_adc adc;
2086 ret = state->set_param_save(fe);
2089 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2091 dib0090_pwm_gain_reset(fe);
2092 /* dib0090_get_wbd_target is returning any possible
2093 temperature compensated wbd-target */
2094 target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
2095 state->dib8000_ops.set_wbd_ref(fe, target);
2097 if (dib8096p_get_best_sampling(fe, &adc) == 0) {
2098 pll.pll_ratio = adc.pll_loopdiv;
2099 pll.pll_prediv = adc.pll_prediv;
2101 dib0700_set_i2c_speed(adap->dev, 200);
2102 state->dib8000_ops.update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
2103 state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2104 dib0700_set_i2c_speed(adap->dev, 1000);
2109 static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
2111 struct dib0700_state *st = adap->dev->priv;
2113 struct dib0700_adapter_state *state = adap->priv;
2115 if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
2118 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2119 if (fw_version >= 0x10200)
2120 st->fw_use_new_i2c_api = 1;
2122 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2124 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2125 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2126 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2128 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2130 dib0700_ctrl_clock(adap->dev, 72, 1);
2133 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2135 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2137 state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
2139 adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap,
2140 0x80, &tfe8096p_dib8000_config);
2142 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2145 static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
2147 struct dib0700_adapter_state *st = adap->priv;
2148 struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_tuner(adap->fe_adap[0].fe);
2150 tfe8096p_dib0090_config.reset = st->dib8000_ops.tuner_sleep;
2151 tfe8096p_dib0090_config.sleep = st->dib8000_ops.tuner_sleep;
2152 tfe8096p_dib0090_config.wbd = dib8096p_wbd_table;
2154 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
2155 &tfe8096p_dib0090_config) == NULL)
2158 st->dib8000_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2160 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
2161 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
2166 static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
2168 return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
2171 static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
2173 return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
2176 static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
2178 return dib9000_set_gpio(fe, 5, 0, !onoff);
2181 static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
2183 return dib9000_set_gpio(fe, 0, 0, onoff);
2186 static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
2188 u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
2190 struct i2c_msg msg[2] = {
2191 {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
2192 {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
2196 dibx000_i2c_set_speed(i2c, 250);
2198 if (i2c_transfer(i2c, msg, 2) != 2)
2201 switch (rb[0] << 8 | rb[1]) {
2203 deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
2206 deb_info("Found DiB0170 rev2");
2209 deb_info("Found DiB0190 rev2");
2212 deb_info("DiB01x0 not found");
2216 for (index_data = 0; index_data < len; index_data += 2) {
2217 wb[2] = (data[index_data + 1] >> 8) & 0xff;
2218 wb[3] = (data[index_data + 1]) & 0xff;
2220 if (data[index_data] == 0) {
2221 wb[0] = (data[index_data] >> 8) & 0xff;
2222 wb[1] = (data[index_data]) & 0xff;
2224 if (i2c_transfer(i2c, msg, 2) != 2)
2227 wb[3] |= rb[1] & ~(3 << 4);
2230 wb[0] = (data[index_data] >> 8)&0xff;
2231 wb[1] = (data[index_data])&0xff;
2233 if (i2c_transfer(i2c, &msg[0], 1) != 1)
2239 static struct dib9000_config stk9090m_config = {
2240 .output_mpeg2_in_188_bytes = 1,
2241 .output_mode = OUTMODE_MPEG2_FIFO,
2242 .vcxo_timer = 279620,
2243 .timing_frequency = 20452225,
2244 .demod_clock_khz = 60000,
2245 .xtal_clock_khz = 30000,
2246 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2250 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
2251 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
2256 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
2257 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
2261 static struct dib9000_config nim9090md_config[2] = {
2263 .output_mpeg2_in_188_bytes = 1,
2264 .output_mode = OUTMODE_MPEG2_FIFO,
2265 .vcxo_timer = 279620,
2266 .timing_frequency = 20452225,
2267 .demod_clock_khz = 60000,
2268 .xtal_clock_khz = 30000,
2269 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2271 .output_mpeg2_in_188_bytes = 1,
2272 .output_mode = OUTMODE_DIVERSITY,
2273 .vcxo_timer = 279620,
2274 .timing_frequency = 20452225,
2275 .demod_clock_khz = 60000,
2276 .xtal_clock_khz = 30000,
2277 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
2281 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
2282 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
2287 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
2288 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
2293 static struct dib0090_config dib9090_dib0090_config = {
2297 .io.pll_loopdiv = 8,
2298 .io.adc_clock_ratio = 8,
2299 .io.pll_int_loop_filt = 0,
2300 .io.clock_khz = 30000,
2301 .reset = dib90x0_tuner_reset,
2302 .sleep = dib90x0_tuner_sleep,
2307 .freq_offset_khz_uhf = 0,
2308 .freq_offset_khz_vhf = 0,
2311 static struct dib0090_config nim9090md_dib0090_config[2] = {
2316 .io.pll_loopdiv = 8,
2317 .io.adc_clock_ratio = 8,
2318 .io.pll_int_loop_filt = 0,
2319 .io.clock_khz = 30000,
2320 .reset = dib90x0_tuner_reset,
2321 .sleep = dib90x0_tuner_sleep,
2326 .freq_offset_khz_uhf = 0,
2327 .freq_offset_khz_vhf = 0,
2332 .io.pll_loopdiv = 8,
2333 .io.adc_clock_ratio = 8,
2334 .io.pll_int_loop_filt = 0,
2335 .io.clock_khz = 30000,
2336 .reset = dib90x0_tuner_reset,
2337 .sleep = dib90x0_tuner_sleep,
2342 .freq_offset_khz_uhf = 0,
2343 .freq_offset_khz_vhf = 0,
2348 static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
2350 struct dib0700_adapter_state *state = adap->priv;
2351 struct dib0700_state *st = adap->dev->priv;
2354 /* Make use of the new i2c functions from FW 1.20 */
2355 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2356 if (fw_version >= 0x10200)
2357 st->fw_use_new_i2c_api = 1;
2358 dib0700_set_i2c_speed(adap->dev, 340);
2360 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2362 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2363 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2364 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2365 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2367 dib0700_ctrl_clock(adap->dev, 72, 1);
2370 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2372 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2374 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
2376 if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
2377 deb_info("%s: Upload failed. (file not found?)\n", __func__);
2380 deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
2382 stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
2383 stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
2385 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
2387 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2390 static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
2392 struct dib0700_adapter_state *state = adap->priv;
2393 struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
2394 u16 data_dib190[10] = {
2402 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
2404 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
2405 if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
2407 dib0700_set_i2c_speed(adap->dev, 1500);
2408 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
2410 release_firmware(state->frontend_firmware);
2414 static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
2416 struct dib0700_adapter_state *state = adap->priv;
2417 struct dib0700_state *st = adap->dev->priv;
2418 struct i2c_adapter *i2c;
2419 struct dvb_frontend *fe_slave;
2422 /* Make use of the new i2c functions from FW 1.20 */
2423 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
2424 if (fw_version >= 0x10200)
2425 st->fw_use_new_i2c_api = 1;
2426 dib0700_set_i2c_speed(adap->dev, 340);
2428 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2430 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2431 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2432 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2433 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2435 dib0700_ctrl_clock(adap->dev, 72, 1);
2438 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2440 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2442 if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
2443 deb_info("%s: Upload failed. (file not found?)\n", __func__);
2446 deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
2448 nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
2449 nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
2450 nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
2451 nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
2453 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
2454 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
2456 if (adap->fe_adap[0].fe == NULL)
2459 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
2460 dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
2462 fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
2463 dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
2465 return fe_slave == NULL ? -ENODEV : 0;
2468 static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
2470 struct dib0700_adapter_state *state = adap->priv;
2471 struct i2c_adapter *i2c;
2472 struct dvb_frontend *fe_slave;
2473 u16 data_dib190[10] = {
2480 i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
2481 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
2483 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
2484 if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
2487 dib0700_set_i2c_speed(adap->dev, 1500);
2488 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
2491 fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
2492 if (fe_slave != NULL) {
2493 i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
2494 dib9000_set_i2c_adapter(fe_slave, i2c);
2496 i2c = dib9000_get_tuner_interface(fe_slave);
2497 if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
2499 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
2500 dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500);
2501 if (dib9000_firmware_post_pll_init(fe_slave) < 0)
2504 release_firmware(state->frontend_firmware);
2510 static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc)
2512 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
2515 u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */
2516 u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
2517 u32 fdem_max = 76000;
2518 u32 fdem_min = 69500;
2519 u32 fcp = 0, fs = 0, fdem = 0;
2520 u32 harmonic_id = 0;
2522 adc->pll_loopdiv = loopdiv;
2523 adc->pll_prediv = prediv;
2526 deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
2528 /* Find Min and Max prediv */
2529 while ((xtal/max_prediv) >= fcp_min)
2533 min_prediv = max_prediv;
2534 while ((xtal/min_prediv) <= fcp_max) {
2536 if (min_prediv == 1)
2539 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2543 for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
2544 fcp = xtal / prediv;
2545 if (fcp > fcp_min && fcp < fcp_max) {
2546 for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
2547 fdem = ((xtal/prediv) * loopdiv);
2549 /* test min/max system restrictions */
2551 if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
2553 /* test fs harmonics positions */
2554 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
2555 if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
2562 adc->pll_loopdiv = loopdiv;
2563 adc->pll_prediv = prediv;
2564 adc->timf = 2396745143UL/fdem*(1 << 9);
2565 adc->timf += ((2396745143UL%fdem) << 9)/fdem;
2566 deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
2577 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2583 static int dib7090_agc_startup(struct dvb_frontend *fe)
2585 struct dvb_usb_adapter *adap = fe->dvb->priv;
2586 struct dib0700_adapter_state *state = adap->priv;
2587 struct dibx000_bandwidth_config pll;
2589 struct dibx090p_best_adc adc;
2592 ret = state->set_param_save(fe);
2596 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2597 dib0090_pwm_gain_reset(fe);
2598 target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
2599 state->dib7000p_ops.set_wbd_ref(fe, target);
2601 if (dib7090p_get_best_sampling(fe, &adc) == 0) {
2602 pll.pll_ratio = adc.pll_loopdiv;
2603 pll.pll_prediv = adc.pll_prediv;
2605 state->dib7000p_ops.update_pll(fe, &pll);
2606 state->dib7000p_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2611 static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart)
2613 deb_info("AGC restart callback: %d", restart);
2614 if (restart == 0) /* before AGC startup */
2615 dib0090_set_dc_servo(fe, 1);
2619 static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global)
2621 struct dvb_usb_adapter *adap = fe->dvb->priv;
2622 struct dib0700_adapter_state *state = adap->priv;
2624 deb_info("update LNA: agc global=%i", agc_global);
2626 if (agc_global < 25000) {
2627 state->dib7000p_ops.set_gpio(fe, 8, 0, 0);
2628 state->dib7000p_ops.set_agc1_min(fe, 0);
2630 state->dib7000p_ops.set_gpio(fe, 8, 0, 1);
2631 state->dib7000p_ops.set_agc1_min(fe, 32768);
2637 static struct dib0090_wbd_slope dib7090_wbd_table[] = {
2638 { 380, 81, 850, 64, 540, 4},
2639 { 860, 51, 866, 21, 375, 4},
2640 {1700, 0, 250, 0, 100, 6},
2641 {2600, 0, 250, 0, 100, 6},
2642 { 0xFFFF, 0, 0, 0, 0, 0},
2645 static struct dibx000_agc_config dib7090_agc_config[2] = {
2647 .band_caps = BAND_UHF,
2648 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2649 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2650 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2653 .time_stabiliz = 10,
2684 .perform_agc_softsplit = 0,
2686 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
2687 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2688 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2689 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2692 .time_stabiliz = 10,
2723 .perform_agc_softsplit = 0,
2727 static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
2731 (3 << 14) | (1 << 12) | (524 << 0),
2737 static struct dib7000p_config nim7090_dib7000p_config = {
2738 .output_mpeg2_in_188_bytes = 1,
2739 .hostbus_diversity = 1,
2740 .tuner_is_baseband = 1,
2741 .update_lna = tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */
2743 .agc_config_count = 2,
2744 .agc = dib7090_agc_config,
2746 .bw = &dib7090_clock_config_12_mhz,
2748 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2749 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2750 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2754 .agc_control = dib7090_agc_restart,
2757 .disable_sample_and_hold = 0,
2758 .enable_current_mirror = 0,
2759 .diversity_delay = 0,
2761 .output_mode = OUTMODE_MPEG2_FIFO,
2765 static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global)
2767 struct dvb_usb_adapter *adap = fe->dvb->priv;
2768 struct dib0700_adapter_state *state = adap->priv;
2770 deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global);
2771 if (agc_global < 25000) {
2772 state->dib7000p_ops.set_gpio(fe, 5, 0, 0);
2773 state->dib7000p_ops.set_agc1_min(fe, 0);
2775 state->dib7000p_ops.set_gpio(fe, 5, 0, 1);
2776 state->dib7000p_ops.set_agc1_min(fe, 32768);
2782 static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
2784 .output_mpeg2_in_188_bytes = 1,
2785 .hostbus_diversity = 1,
2786 .tuner_is_baseband = 1,
2787 .update_lna = tfe7090p_pvr_update_lna,
2789 .agc_config_count = 2,
2790 .agc = dib7090_agc_config,
2792 .bw = &dib7090_clock_config_12_mhz,
2794 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2795 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2796 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2800 .agc_control = dib7090_agc_restart,
2803 .disable_sample_and_hold = 0,
2804 .enable_current_mirror = 0,
2805 .diversity_delay = 0,
2807 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2808 .default_i2c_addr = 0x90,
2811 .output_mpeg2_in_188_bytes = 1,
2812 .hostbus_diversity = 1,
2813 .tuner_is_baseband = 1,
2814 .update_lna = tfe7090p_pvr_update_lna,
2816 .agc_config_count = 2,
2817 .agc = dib7090_agc_config,
2819 .bw = &dib7090_clock_config_12_mhz,
2821 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2822 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2823 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2827 .agc_control = dib7090_agc_restart,
2830 .disable_sample_and_hold = 0,
2831 .enable_current_mirror = 0,
2832 .diversity_delay = 0,
2834 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2835 .default_i2c_addr = 0x92,
2840 static struct dib0090_config nim7090_dib0090_config = {
2841 .io.clock_khz = 12000,
2845 .io.pll_loopdiv = 6,
2846 .io.adc_clock_ratio = 0,
2847 .io.pll_int_loop_filt = 0,
2849 .freq_offset_khz_uhf = 0,
2850 .freq_offset_khz_vhf = 0,
2855 .wbd_vhf_offset = 0,
2856 .wbd_cband_offset = 0,
2860 .fref_clock_ratio = 0,
2862 .wbd = dib7090_wbd_table,
2864 .ls_cfg_pad_drv = 0,
2870 static struct dib7000p_config tfe7790p_dib7000p_config = {
2871 .output_mpeg2_in_188_bytes = 1,
2872 .hostbus_diversity = 1,
2873 .tuner_is_baseband = 1,
2874 .update_lna = tfe7790p_update_lna,
2876 .agc_config_count = 2,
2877 .agc = dib7090_agc_config,
2879 .bw = &dib7090_clock_config_12_mhz,
2881 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2882 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2883 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2887 .agc_control = dib7090_agc_restart,
2890 .disable_sample_and_hold = 0,
2891 .enable_current_mirror = 0,
2892 .diversity_delay = 0,
2894 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2898 static struct dib0090_config tfe7790p_dib0090_config = {
2899 .io.clock_khz = 12000,
2903 .io.pll_loopdiv = 6,
2904 .io.adc_clock_ratio = 0,
2905 .io.pll_int_loop_filt = 0,
2907 .freq_offset_khz_uhf = 0,
2908 .freq_offset_khz_vhf = 0,
2913 .wbd_vhf_offset = 0,
2914 .wbd_cband_offset = 0,
2918 .fref_clock_ratio = 0,
2920 .wbd = dib7090_wbd_table,
2922 .ls_cfg_pad_drv = 0,
2926 .force_cband_input = 0,
2928 .force_crystal_mode = 1,
2931 static struct dib0090_config tfe7090pvr_dib0090_config[2] = {
2933 .io.clock_khz = 12000,
2937 .io.pll_loopdiv = 6,
2938 .io.adc_clock_ratio = 0,
2939 .io.pll_int_loop_filt = 0,
2941 .freq_offset_khz_uhf = 50,
2942 .freq_offset_khz_vhf = 70,
2947 .wbd_vhf_offset = 0,
2948 .wbd_cband_offset = 0,
2952 .fref_clock_ratio = 0,
2954 .wbd = dib7090_wbd_table,
2956 .ls_cfg_pad_drv = 0,
2961 .io.clock_khz = 12000,
2965 .io.pll_loopdiv = 6,
2966 .io.adc_clock_ratio = 0,
2967 .io.pll_int_loop_filt = 0,
2969 .freq_offset_khz_uhf = -50,
2970 .freq_offset_khz_vhf = -70,
2975 .wbd_vhf_offset = 0,
2976 .wbd_cband_offset = 0,
2980 .fref_clock_ratio = 0,
2982 .wbd = dib7090_wbd_table,
2984 .ls_cfg_pad_drv = 0,
2991 static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
2993 struct dib0700_adapter_state *state = adap->priv;
2995 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
2998 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3000 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3001 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3002 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3003 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3006 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3008 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3010 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
3011 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3012 dvb_detach(&state->dib7000p_ops);
3015 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
3017 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3020 static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
3022 struct dib0700_adapter_state *st = adap->priv;
3023 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3025 nim7090_dib0090_config.reset = st->dib7000p_ops.tuner_sleep,
3026 nim7090_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep,
3027 nim7090_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
3029 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
3032 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3034 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3035 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3039 static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
3041 struct dib0700_state *st = adap->dev->priv;
3042 struct dib0700_adapter_state *state = adap->priv;
3044 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3047 /* The TFE7090 requires the dib0700 to not be in master mode */
3048 st->disable_streaming_master_mode = 1;
3050 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3052 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3053 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3054 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3055 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3058 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3060 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3062 /* initialize IC 0 */
3063 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
3064 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3065 dvb_detach(&state->dib7000p_ops);
3069 dib0700_set_i2c_speed(adap->dev, 340);
3070 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
3071 if (adap->fe_adap[0].fe == NULL)
3074 state->dib7000p_ops.slave_reset(adap->fe_adap[0].fe);
3079 static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
3081 struct i2c_adapter *i2c;
3082 struct dib0700_adapter_state *state = adap->priv;
3084 if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
3085 err("the master dib7090 has to be initialized first");
3086 return -ENODEV; /* the master device has not been initialized */
3089 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3092 i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
3093 if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
3094 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__);
3095 dvb_detach(&state->dib7000p_ops);
3099 adap->fe_adap[0].fe = state->dib7000p_ops.init(i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
3100 dib0700_set_i2c_speed(adap->dev, 200);
3102 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3105 static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
3107 struct dib0700_adapter_state *st = adap->priv;
3108 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3110 tfe7090pvr_dib0090_config[0].reset = st->dib7000p_ops.tuner_sleep;
3111 tfe7090pvr_dib0090_config[0].sleep = st->dib7000p_ops.tuner_sleep;
3112 tfe7090pvr_dib0090_config[0].get_adc_power = st->dib7000p_ops.get_adc_power;
3114 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
3117 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3119 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3120 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3124 static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
3126 struct dib0700_adapter_state *st = adap->priv;
3127 struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3129 tfe7090pvr_dib0090_config[1].reset = st->dib7000p_ops.tuner_sleep;
3130 tfe7090pvr_dib0090_config[1].sleep = st->dib7000p_ops.tuner_sleep;
3131 tfe7090pvr_dib0090_config[1].get_adc_power = st->dib7000p_ops.get_adc_power;
3133 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
3136 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3138 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3139 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3143 static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap)
3145 struct dib0700_state *st = adap->dev->priv;
3146 struct dib0700_adapter_state *state = adap->priv;
3148 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3151 /* The TFE7790P requires the dib0700 to not be in master mode */
3152 st->disable_streaming_master_mode = 1;
3154 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3156 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3157 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3158 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3159 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3161 dib0700_ctrl_clock(adap->dev, 72, 1);
3162 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3164 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3166 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap,
3167 1, 0x10, &tfe7790p_dib7000p_config) != 0) {
3168 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3170 dvb_detach(&state->dib7000p_ops);
3173 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
3174 0x80, &tfe7790p_dib7000p_config);
3176 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3179 static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap)
3181 struct dib0700_adapter_state *st = adap->priv;
3182 struct i2c_adapter *tun_i2c =
3183 st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe);
3186 tfe7790p_dib0090_config.reset = st->dib7000p_ops.tuner_sleep;
3187 tfe7790p_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep;
3188 tfe7790p_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power;
3190 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
3191 &tfe7790p_dib0090_config) == NULL)
3194 st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3196 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
3197 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
3202 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
3204 .output_mpeg2_in_188_bytes = 1,
3206 .agc_config_count = 1,
3207 .agc = &dib7070_agc_config,
3208 .bw = &dib7070_bw_config_12_mhz,
3209 .tuner_is_baseband = 1,
3212 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
3213 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
3214 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
3216 .hostbus_diversity = 1,
3218 .output_mpeg2_in_188_bytes = 1,
3220 .agc_config_count = 1,
3221 .agc = &dib7070_agc_config,
3222 .bw = &dib7070_bw_config_12_mhz,
3223 .tuner_is_baseband = 1,
3226 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
3227 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
3228 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
3230 .hostbus_diversity = 1,
3234 static void stk7070pd_init(struct dvb_usb_device *dev)
3236 dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1);
3238 dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1);
3239 dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1);
3240 dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1);
3241 dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0);
3243 dib0700_ctrl_clock(dev, 72, 1);
3246 dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1);
3249 static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
3251 struct dib0700_adapter_state *state = adap->priv;
3253 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3256 stk7070pd_init(adap->dev);
3259 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3261 if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
3262 stk7070pd_dib7000p_config) != 0) {
3263 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3265 dvb_detach(&state->dib7000p_ops);
3269 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
3270 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3273 static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
3275 struct dib0700_adapter_state *state = adap->priv;
3277 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3280 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
3281 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3284 static int novatd_read_status_override(struct dvb_frontend *fe,
3287 struct dvb_usb_adapter *adap = fe->dvb->priv;
3288 struct dvb_usb_device *dev = adap->dev;
3289 struct dib0700_state *state = dev->priv;
3292 ret = state->read_status(fe, stat);
3295 dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT,
3296 !!(*stat & FE_HAS_LOCK));
3301 static int novatd_sleep_override(struct dvb_frontend* fe)
3303 struct dvb_usb_adapter *adap = fe->dvb->priv;
3304 struct dvb_usb_device *dev = adap->dev;
3305 struct dib0700_state *state = dev->priv;
3308 dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0);
3310 return state->sleep(fe);
3314 * novatd_frontend_attach - Nova-TD specific attach
3316 * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
3317 * information purposes.
3319 static int novatd_frontend_attach(struct dvb_usb_adapter *adap)
3321 struct dvb_usb_device *dev = adap->dev;
3322 struct dib0700_state *st = dev->priv;
3323 struct dib0700_adapter_state *state = adap->priv;
3325 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3328 if (adap->id == 0) {
3329 stk7070pd_init(dev);
3331 /* turn the power LED on, the other two off (just in case) */
3332 dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0);
3333 dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0);
3334 dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1);
3336 if (state->dib7000p_ops.i2c_enumeration(&dev->i2c_adap, 2, 18,
3337 stk7070pd_dib7000p_config) != 0) {
3338 err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n",
3340 dvb_detach(&state->dib7000p_ops);
3345 adap->fe_adap[0].fe = state->dib7000p_ops.init(&dev->i2c_adap,
3346 adap->id == 0 ? 0x80 : 0x82,
3347 &stk7070pd_dib7000p_config[adap->id]);
3349 if (adap->fe_adap[0].fe == NULL)
3352 st->read_status = adap->fe_adap[0].fe->ops.read_status;
3353 adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override;
3354 st->sleep = adap->fe_adap[0].fe->ops.sleep;
3355 adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override;
3361 static struct s5h1411_config pinnacle_801e_config = {
3362 .output_mode = S5H1411_PARALLEL_OUTPUT,
3363 .gpio = S5H1411_GPIO_OFF,
3364 .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
3365 .qam_if = S5H1411_IF_44000,
3366 .vsb_if = S5H1411_IF_44000,
3367 .inversion = S5H1411_INVERSION_OFF,
3368 .status_mode = S5H1411_DEMODLOCKING
3371 /* Pinnacle PCTV HD Pro 801e GPIOs map:
3372 GPIO0 - currently unknown
3373 GPIO1 - xc5000 tuner reset
3374 GPIO2 - CX25843 sleep
3375 GPIO3 - currently unknown
3376 GPIO4 - currently unknown
3377 GPIO6 - currently unknown
3378 GPIO7 - currently unknown
3379 GPIO9 - currently unknown
3380 GPIO10 - CX25843 reset
3382 static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
3384 struct dib0700_state *st = adap->dev->priv;
3386 /* Make use of the new i2c functions from FW 1.20 */
3387 st->fw_use_new_i2c_api = 1;
3389 /* The s5h1411 requires the dib0700 to not be in master mode */
3390 st->disable_streaming_master_mode = 1;
3392 /* All msleep values taken from Windows USB trace */
3393 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
3394 dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
3395 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3397 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3399 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3401 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
3402 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
3403 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
3404 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
3405 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
3408 /* Put the CX25843 to sleep for now since we're in digital mode */
3409 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
3411 /* GPIOs are initialized, do the attach */
3412 adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
3413 &adap->dev->i2c_adap);
3414 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3417 static int dib0700_xc5000_tuner_callback(void *priv, int component,
3418 int command, int arg)
3420 struct dvb_usb_adapter *adap = priv;
3422 if (command == XC5000_TUNER_RESET) {
3423 /* Reset the tuner */
3424 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
3426 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
3429 err("xc5000: unknown tuner callback command: %d\n", command);
3436 static struct xc5000_config s5h1411_xc5000_tunerconfig = {
3437 .i2c_address = 0x64,
3441 static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
3443 /* FIXME: generalize & move to common area */
3444 adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
3446 return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
3447 &s5h1411_xc5000_tunerconfig)
3448 == NULL ? -ENODEV : 0;
3451 static int dib0700_xc4000_tuner_callback(void *priv, int component,
3452 int command, int arg)
3454 struct dvb_usb_adapter *adap = priv;
3455 struct dib0700_adapter_state *state = adap->priv;
3457 if (command == XC4000_TUNER_RESET) {
3458 /* Reset the tuner */
3459 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
3461 state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
3463 err("xc4000: unknown tuner callback command: %d\n", command);
3470 static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
3471 .band_caps = BAND_UHF | BAND_VHF,
3474 .time_stabiliz = 0x15,
3475 .alpha_level = 0x00,
3488 .agc1_slope1 = 0x00,
3489 .agc1_slope2 = 0x00,
3492 .agc2_slope1 = 0x1d,
3493 .agc2_slope2 = 0x1d,
3498 .perform_agc_softsplit = 0x00,
3501 static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
3502 60000, 30000, /* internal, sampling */
3503 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
3504 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, */
3505 /* ADClkSrc, modulo */
3506 (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */
3507 39370534, /* ifreq */
3508 20452225, /* timf */
3512 /* FIXME: none of these inputs are validated yet */
3513 static struct dib7000p_config pctv_340e_config = {
3514 .output_mpeg2_in_188_bytes = 1,
3516 .agc_config_count = 1,
3517 .agc = &stk7700p_7000p_xc4000_agc_config,
3518 .bw = &stk7700p_xc4000_pll_config,
3520 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
3521 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
3522 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
3525 /* PCTV 340e GPIOs map:
3527 GPIO2 - CX25843 sleep
3528 GPIO3 - CS5340 reset
3530 GPIO6 - Power Supply
3531 GPIO8 - LNA (1=off 0=on)
3532 GPIO10 - CX25843 reset
3534 GPIO8 - xc4000 reset
3536 static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
3538 struct dib0700_state *st = adap->dev->priv;
3539 struct dib0700_adapter_state *state = adap->priv;
3541 if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops))
3544 /* Power Supply on */
3545 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3547 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3548 msleep(100); /* Allow power supply to settle before probing */
3551 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3552 msleep(1); /* cx25843 datasheet say 350us required */
3553 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3555 /* LNA off for now */
3556 dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1);
3558 /* Put the CX25843 to sleep for now since we're in digital mode */
3559 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
3561 /* FIXME: not verified yet */
3562 dib0700_ctrl_clock(adap->dev, 72, 1);
3566 if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
3567 /* Demodulator not found for some reason? */
3568 dvb_detach(&state->dib7000p_ops);
3572 adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x12,
3574 st->is_dib7000pc = 1;
3576 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3579 static struct xc4000_config dib7000p_xc4000_tunerconfig = {
3580 .i2c_address = 0x61,
3583 .set_smoothedcvbs = 0,
3587 static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
3589 struct i2c_adapter *tun_i2c;
3590 struct dib0700_adapter_state *state = adap->priv;
3592 /* The xc4000 is not on the main i2c bus */
3593 tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
3594 DIBX000_I2C_INTERFACE_TUNER, 1);
3595 if (tun_i2c == NULL) {
3596 printk(KERN_ERR "Could not reach tuner i2c bus\n");
3600 /* Setup the reset callback */
3601 adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
3603 return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
3604 &dib7000p_xc4000_tunerconfig)
3605 == NULL ? -ENODEV : 0;
3608 static struct lgdt3305_config hcw_lgdt3305_config = {
3610 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
3611 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
3612 .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
3614 .spectral_inversion = 1,
3617 .usref_8vsb = 0x0500,
3620 static struct mxl5007t_config hcw_mxl5007t_config = {
3621 .xtal_freq_hz = MxL_XTAL_25_MHZ,
3622 .if_freq_hz = MxL_IF_6_MHZ,
3627 GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
3628 GPIO1 - ANT_SEL (H: VPA, L: MCX)
3634 MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
3636 static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
3638 struct dib0700_state *st = adap->dev->priv;
3640 /* Make use of the new i2c functions from FW 1.20 */
3641 st->fw_use_new_i2c_api = 1;
3643 st->disable_streaming_master_mode = 1;
3645 /* fe power enable */
3646 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
3648 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
3652 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3654 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
3656 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
3659 adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
3660 &hcw_lgdt3305_config,
3661 &adap->dev->i2c_adap);
3663 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
3666 static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
3668 return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
3669 &adap->dev->i2c_adap, 0x60,
3670 &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
3674 /* DVB-USB and USB stuff follows */
3675 struct usb_device_id dib0700_usb_id_table[] = {
3676 /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
3677 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
3678 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
3679 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
3680 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
3681 /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
3682 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
3683 { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
3684 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
3685 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
3686 /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
3687 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
3688 { USB_DEVICE(USB_VID_TERRATEC,
3689 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
3690 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
3691 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
3692 /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
3693 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
3694 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
3695 { USB_DEVICE(USB_VID_PINNACLE,
3696 USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
3697 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
3698 /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
3699 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
3700 { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
3701 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
3702 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
3703 /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
3704 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
3705 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
3706 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
3707 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
3708 /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
3709 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
3710 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
3711 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
3712 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
3713 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
3714 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
3715 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
3716 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
3717 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
3718 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
3719 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
3720 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
3721 { USB_DEVICE(USB_VID_TERRATEC,
3722 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
3723 { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
3724 /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
3725 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
3726 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
3727 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
3728 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
3729 /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
3730 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
3731 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
3732 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
3733 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
3734 /* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
3735 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
3736 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
3737 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
3738 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
3739 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
3740 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
3741 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
3742 { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
3743 { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
3744 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
3745 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
3746 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
3747 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
3748 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) },
3749 /* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) },
3750 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) },
3751 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) },
3752 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) },
3753 { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
3754 /* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) },
3755 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) },
3756 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
3757 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790P) },
3758 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) },
3759 /* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) },
3760 { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E) },
3761 { USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E_SE) },
3762 { 0 } /* Terminating entry */
3764 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
3766 #define DIB0700_DEFAULT_DEVICE_PROPERTIES \
3767 .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
3768 .usb_ctrl = DEVICE_SPECIFIC, \
3769 .firmware = "dvb-usb-dib0700-1.20.fw", \
3770 .download_firmware = dib0700_download_firmware, \
3771 .no_reconnect = 1, \
3772 .size_of_priv = sizeof(struct dib0700_state), \
3773 .i2c_algo = &dib0700_i2c_algo, \
3774 .identify_state = dib0700_identify_state
3776 #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
3777 .streaming_ctrl = dib0700_streaming_ctrl, \
3784 .buffersize = 39480, \
3789 struct dvb_usb_device_properties dib0700_devices[] = {
3791 DIB0700_DEFAULT_DEVICE_PROPERTIES,
3798 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3799 .pid_filter_count = 32,
3800 .pid_filter = stk7700p_pid_filter,
3801 .pid_filter_ctrl = stk7700p_pid_filter_ctrl,
3802 .frontend_attach = stk7700p_frontend_attach,
3803 .tuner_attach = stk7700p_tuner_attach,
3805 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3810 .num_device_descs = 8,
3812 { "DiBcom STK7700P reference design",
3813 { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
3816 { "Hauppauge Nova-T Stick",
3817 { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
3820 { "AVerMedia AVerTV DVB-T Volar",
3821 { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
3824 { "Compro Videomate U500",
3825 { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
3828 { "Uniwill STK7700P based (Hama and others)",
3829 { &dib0700_usb_id_table[7], NULL },
3832 { "Leadtek Winfast DTV Dongle (STK7700P based)",
3833 { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
3836 { "AVerMedia AVerTV DVB-T Express",
3837 { &dib0700_usb_id_table[20] },
3841 { &dib0700_usb_id_table[21], NULL },
3847 .rc_interval = DEFAULT_RC_INTERVAL,
3848 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3849 .rc_query = dib0700_rc_query_old_firmware,
3850 .allowed_protos = RC_BIT_RC5 |
3853 .change_protocol = dib0700_change_protocol,
3855 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3862 .frontend_attach = bristol_frontend_attach,
3863 .tuner_attach = bristol_tuner_attach,
3865 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3870 .frontend_attach = bristol_frontend_attach,
3871 .tuner_attach = bristol_tuner_attach,
3873 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3878 .num_device_descs = 1,
3880 { "Hauppauge Nova-T 500 Dual DVB-T",
3881 { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
3887 .rc_interval = DEFAULT_RC_INTERVAL,
3888 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3889 .rc_query = dib0700_rc_query_old_firmware,
3890 .allowed_protos = RC_BIT_RC5 |
3893 .change_protocol = dib0700_change_protocol,
3895 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3902 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3903 .pid_filter_count = 32,
3904 .pid_filter = stk70x0p_pid_filter,
3905 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3906 .frontend_attach = stk7700d_frontend_attach,
3907 .tuner_attach = stk7700d_tuner_attach,
3909 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3914 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3915 .pid_filter_count = 32,
3916 .pid_filter = stk70x0p_pid_filter,
3917 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3918 .frontend_attach = stk7700d_frontend_attach,
3919 .tuner_attach = stk7700d_tuner_attach,
3921 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3926 .num_device_descs = 5,
3928 { "Pinnacle PCTV 2000e",
3929 { &dib0700_usb_id_table[11], NULL },
3932 { "Terratec Cinergy DT XS Diversity",
3933 { &dib0700_usb_id_table[12], NULL },
3936 { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
3937 { &dib0700_usb_id_table[13], NULL },
3940 { "DiBcom STK7700D reference design",
3941 { &dib0700_usb_id_table[14], NULL },
3944 { "YUAN High-Tech DiBcom STK7700D",
3945 { &dib0700_usb_id_table[55], NULL },
3952 .rc_interval = DEFAULT_RC_INTERVAL,
3953 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3954 .rc_query = dib0700_rc_query_old_firmware,
3955 .allowed_protos = RC_BIT_RC5 |
3958 .change_protocol = dib0700_change_protocol,
3960 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3967 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3968 .pid_filter_count = 32,
3969 .pid_filter = stk70x0p_pid_filter,
3970 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3971 .frontend_attach = stk7700P2_frontend_attach,
3972 .tuner_attach = stk7700d_tuner_attach,
3974 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3979 .num_device_descs = 3,
3981 { "ASUS My Cinema U3000 Mini DVBT Tuner",
3982 { &dib0700_usb_id_table[23], NULL },
3986 { &dib0700_usb_id_table[31], NULL },
3989 { "Terratec Cinergy T Express",
3990 { &dib0700_usb_id_table[42], NULL },
3996 .rc_interval = DEFAULT_RC_INTERVAL,
3997 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3998 .module_name = "dib0700",
3999 .rc_query = dib0700_rc_query_old_firmware,
4000 .allowed_protos = RC_BIT_RC5 |
4003 .change_protocol = dib0700_change_protocol,
4005 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4012 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4013 .pid_filter_count = 32,
4014 .pid_filter = stk70x0p_pid_filter,
4015 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4016 .frontend_attach = stk7070p_frontend_attach,
4017 .tuner_attach = dib7070p_tuner_attach,
4019 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4021 .size_of_priv = sizeof(struct dib0700_adapter_state),
4025 .num_device_descs = 12,
4027 { "DiBcom STK7070P reference design",
4028 { &dib0700_usb_id_table[15], NULL },
4031 { "Pinnacle PCTV DVB-T Flash Stick",
4032 { &dib0700_usb_id_table[16], NULL },
4035 { "Artec T14BR DVB-T",
4036 { &dib0700_usb_id_table[22], NULL },
4039 { "ASUS My Cinema U3100 Mini DVBT Tuner",
4040 { &dib0700_usb_id_table[24], NULL },
4043 { "Hauppauge Nova-T Stick",
4044 { &dib0700_usb_id_table[25], NULL },
4047 { "Hauppauge Nova-T MyTV.t",
4048 { &dib0700_usb_id_table[26], NULL },
4051 { "Pinnacle PCTV 72e",
4052 { &dib0700_usb_id_table[29], NULL },
4055 { "Pinnacle PCTV 73e",
4056 { &dib0700_usb_id_table[30], NULL },
4059 { "Elgato EyeTV DTT",
4060 { &dib0700_usb_id_table[49], NULL },
4064 { &dib0700_usb_id_table[45], NULL },
4067 { "Elgato EyeTV Dtt Dlx PD378S",
4068 { &dib0700_usb_id_table[50], NULL },
4071 { "Elgato EyeTV DTT rev. 2",
4072 { &dib0700_usb_id_table[80], NULL },
4078 .rc_interval = DEFAULT_RC_INTERVAL,
4079 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4080 .module_name = "dib0700",
4081 .rc_query = dib0700_rc_query_old_firmware,
4082 .allowed_protos = RC_BIT_RC5 |
4085 .change_protocol = dib0700_change_protocol,
4087 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4094 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4095 .pid_filter_count = 32,
4096 .pid_filter = stk70x0p_pid_filter,
4097 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4098 .frontend_attach = stk7070p_frontend_attach,
4099 .tuner_attach = dib7070p_tuner_attach,
4101 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4103 .size_of_priv = sizeof(struct dib0700_adapter_state),
4107 .num_device_descs = 3,
4109 { "Pinnacle PCTV 73A",
4110 { &dib0700_usb_id_table[56], NULL },
4113 { "Pinnacle PCTV 73e SE",
4114 { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
4117 { "Pinnacle PCTV 282e",
4118 { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
4124 .rc_interval = DEFAULT_RC_INTERVAL,
4125 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4126 .module_name = "dib0700",
4127 .rc_query = dib0700_rc_query_old_firmware,
4128 .allowed_protos = RC_BIT_RC5 |
4131 .change_protocol = dib0700_change_protocol,
4133 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4140 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4141 .pid_filter_count = 32,
4142 .pid_filter = stk70x0p_pid_filter,
4143 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4144 .frontend_attach = novatd_frontend_attach,
4145 .tuner_attach = dib7070p_tuner_attach,
4147 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4149 .size_of_priv = sizeof(struct dib0700_adapter_state),
4153 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4154 .pid_filter_count = 32,
4155 .pid_filter = stk70x0p_pid_filter,
4156 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4157 .frontend_attach = novatd_frontend_attach,
4158 .tuner_attach = dib7070p_tuner_attach,
4160 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4162 .size_of_priv = sizeof(struct dib0700_adapter_state),
4166 .num_device_descs = 3,
4168 { "Hauppauge Nova-TD Stick (52009)",
4169 { &dib0700_usb_id_table[35], NULL },
4173 { &dib0700_usb_id_table[81], NULL },
4177 { &dib0700_usb_id_table[82], NULL },
4183 .rc_interval = DEFAULT_RC_INTERVAL,
4184 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4185 .module_name = "dib0700",
4186 .rc_query = dib0700_rc_query_old_firmware,
4187 .allowed_protos = RC_BIT_RC5 |
4190 .change_protocol = dib0700_change_protocol,
4192 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4199 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4200 .pid_filter_count = 32,
4201 .pid_filter = stk70x0p_pid_filter,
4202 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4203 .frontend_attach = stk7070pd_frontend_attach0,
4204 .tuner_attach = dib7070p_tuner_attach,
4206 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4208 .size_of_priv = sizeof(struct dib0700_adapter_state),
4212 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4213 .pid_filter_count = 32,
4214 .pid_filter = stk70x0p_pid_filter,
4215 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4216 .frontend_attach = stk7070pd_frontend_attach1,
4217 .tuner_attach = dib7070p_tuner_attach,
4219 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4221 .size_of_priv = sizeof(struct dib0700_adapter_state),
4225 .num_device_descs = 5,
4227 { "DiBcom STK7070PD reference design",
4228 { &dib0700_usb_id_table[17], NULL },
4231 { "Pinnacle PCTV Dual DVB-T Diversity Stick",
4232 { &dib0700_usb_id_table[18], NULL },
4235 { "Hauppauge Nova-TD-500 (84xxx)",
4236 { &dib0700_usb_id_table[36], NULL },
4239 { "Terratec Cinergy DT USB XS Diversity/ T5",
4240 { &dib0700_usb_id_table[43],
4241 &dib0700_usb_id_table[53], NULL},
4245 { &dib0700_usb_id_table[44], NULL },
4251 .rc_interval = DEFAULT_RC_INTERVAL,
4252 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4253 .module_name = "dib0700",
4254 .rc_query = dib0700_rc_query_old_firmware,
4255 .allowed_protos = RC_BIT_RC5 |
4258 .change_protocol = dib0700_change_protocol,
4260 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4267 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4268 .pid_filter_count = 32,
4269 .pid_filter = stk70x0p_pid_filter,
4270 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4271 .frontend_attach = stk7070pd_frontend_attach0,
4272 .tuner_attach = dib7070p_tuner_attach,
4274 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4276 .size_of_priv = sizeof(struct dib0700_adapter_state),
4280 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4281 .pid_filter_count = 32,
4282 .pid_filter = stk70x0p_pid_filter,
4283 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4284 .frontend_attach = stk7070pd_frontend_attach1,
4285 .tuner_attach = dib7070p_tuner_attach,
4287 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4289 .size_of_priv = sizeof(struct dib0700_adapter_state),
4293 .num_device_descs = 1,
4295 { "Elgato EyeTV Diversity",
4296 { &dib0700_usb_id_table[68], NULL },
4302 .rc_interval = DEFAULT_RC_INTERVAL,
4303 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
4304 .module_name = "dib0700",
4305 .rc_query = dib0700_rc_query_old_firmware,
4306 .allowed_protos = RC_BIT_RC5 |
4309 .change_protocol = dib0700_change_protocol,
4311 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4318 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4319 .pid_filter_count = 32,
4320 .pid_filter = stk70x0p_pid_filter,
4321 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4322 .frontend_attach = stk7700ph_frontend_attach,
4323 .tuner_attach = stk7700ph_tuner_attach,
4325 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4327 .size_of_priv = sizeof(struct
4328 dib0700_adapter_state),
4332 .num_device_descs = 9,
4334 { "Terratec Cinergy HT USB XE",
4335 { &dib0700_usb_id_table[27], NULL },
4338 { "Pinnacle Expresscard 320cx",
4339 { &dib0700_usb_id_table[28], NULL },
4342 { "Terratec Cinergy HT Express",
4343 { &dib0700_usb_id_table[32], NULL },
4346 { "Gigabyte U8000-RH",
4347 { &dib0700_usb_id_table[37], NULL },
4350 { "YUAN High-Tech STK7700PH",
4351 { &dib0700_usb_id_table[38], NULL },
4354 { "Asus My Cinema-U3000Hybrid",
4355 { &dib0700_usb_id_table[39], NULL },
4358 { "YUAN High-Tech MC770",
4359 { &dib0700_usb_id_table[48], NULL },
4362 { "Leadtek WinFast DTV Dongle H",
4363 { &dib0700_usb_id_table[51], NULL },
4366 { "YUAN High-Tech STK7700D",
4367 { &dib0700_usb_id_table[54], NULL },
4373 .rc_interval = DEFAULT_RC_INTERVAL,
4374 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4375 .module_name = "dib0700",
4376 .rc_query = dib0700_rc_query_old_firmware,
4377 .allowed_protos = RC_BIT_RC5 |
4380 .change_protocol = dib0700_change_protocol,
4382 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4388 .frontend_attach = s5h1411_frontend_attach,
4389 .tuner_attach = xc5000_tuner_attach,
4391 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4393 .size_of_priv = sizeof(struct
4394 dib0700_adapter_state),
4398 .num_device_descs = 2,
4400 { "Pinnacle PCTV HD Pro USB Stick",
4401 { &dib0700_usb_id_table[40], NULL },
4404 { "Pinnacle PCTV HD USB Stick",
4405 { &dib0700_usb_id_table[41], NULL },
4411 .rc_interval = DEFAULT_RC_INTERVAL,
4412 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4413 .module_name = "dib0700",
4414 .rc_query = dib0700_rc_query_old_firmware,
4415 .allowed_protos = RC_BIT_RC5 |
4418 .change_protocol = dib0700_change_protocol,
4420 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4426 .frontend_attach = lgdt3305_frontend_attach,
4427 .tuner_attach = mxl5007t_tuner_attach,
4429 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4431 .size_of_priv = sizeof(struct
4432 dib0700_adapter_state),
4436 .num_device_descs = 2,
4438 { "Hauppauge ATSC MiniCard (B200)",
4439 { &dib0700_usb_id_table[46], NULL },
4442 { "Hauppauge ATSC MiniCard (B210)",
4443 { &dib0700_usb_id_table[47], NULL },
4447 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4454 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4455 .pid_filter_count = 32,
4456 .pid_filter = stk70x0p_pid_filter,
4457 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4458 .frontend_attach = stk7770p_frontend_attach,
4459 .tuner_attach = dib7770p_tuner_attach,
4461 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4464 sizeof(struct dib0700_adapter_state),
4468 .num_device_descs = 4,
4470 { "DiBcom STK7770P reference design",
4471 { &dib0700_usb_id_table[59], NULL },
4474 { "Terratec Cinergy T USB XXS (HD)/ T3",
4475 { &dib0700_usb_id_table[33],
4476 &dib0700_usb_id_table[52],
4477 &dib0700_usb_id_table[60], NULL},
4480 { "TechniSat AirStar TeleStick 2",
4481 { &dib0700_usb_id_table[74], NULL },
4484 { "Medion CTX1921 DVB-T USB",
4485 { &dib0700_usb_id_table[75], NULL },
4491 .rc_interval = DEFAULT_RC_INTERVAL,
4492 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4493 .module_name = "dib0700",
4494 .rc_query = dib0700_rc_query_old_firmware,
4495 .allowed_protos = RC_BIT_RC5 |
4498 .change_protocol = dib0700_change_protocol,
4500 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4506 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4507 .pid_filter_count = 32,
4508 .pid_filter = stk80xx_pid_filter,
4509 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4510 .frontend_attach = stk807x_frontend_attach,
4511 .tuner_attach = dib807x_tuner_attach,
4513 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4516 sizeof(struct dib0700_adapter_state),
4520 .num_device_descs = 3,
4522 { "DiBcom STK807xP reference design",
4523 { &dib0700_usb_id_table[62], NULL },
4526 { "Prolink Pixelview SBTVD",
4527 { &dib0700_usb_id_table[63], NULL },
4530 { "EvolutePC TVWay+",
4531 { &dib0700_usb_id_table[64], NULL },
4537 .rc_interval = DEFAULT_RC_INTERVAL,
4538 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
4539 .module_name = "dib0700",
4540 .rc_query = dib0700_rc_query_old_firmware,
4541 .allowed_protos = RC_BIT_RC5 |
4544 .change_protocol = dib0700_change_protocol,
4546 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4552 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4553 .pid_filter_count = 32,
4554 .pid_filter = stk80xx_pid_filter,
4555 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4556 .frontend_attach = stk807xpvr_frontend_attach0,
4557 .tuner_attach = dib807x_tuner_attach,
4559 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4562 sizeof(struct dib0700_adapter_state),
4567 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4568 .pid_filter_count = 32,
4569 .pid_filter = stk80xx_pid_filter,
4570 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4571 .frontend_attach = stk807xpvr_frontend_attach1,
4572 .tuner_attach = dib807x_tuner_attach,
4574 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4577 sizeof(struct dib0700_adapter_state),
4581 .num_device_descs = 1,
4583 { "DiBcom STK807xPVR reference design",
4584 { &dib0700_usb_id_table[61], NULL },
4590 .rc_interval = DEFAULT_RC_INTERVAL,
4591 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4592 .module_name = "dib0700",
4593 .rc_query = dib0700_rc_query_old_firmware,
4594 .allowed_protos = RC_BIT_RC5 |
4597 .change_protocol = dib0700_change_protocol,
4599 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4605 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4606 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4607 .pid_filter_count = 32,
4608 .pid_filter = stk80xx_pid_filter,
4609 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4610 .frontend_attach = stk809x_frontend_attach,
4611 .tuner_attach = dib809x_tuner_attach,
4613 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4616 sizeof(struct dib0700_adapter_state),
4620 .num_device_descs = 1,
4622 { "DiBcom STK8096GP reference design",
4623 { &dib0700_usb_id_table[67], NULL },
4629 .rc_interval = DEFAULT_RC_INTERVAL,
4630 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4631 .module_name = "dib0700",
4632 .rc_query = dib0700_rc_query_old_firmware,
4633 .allowed_protos = RC_BIT_RC5 |
4636 .change_protocol = dib0700_change_protocol,
4638 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4644 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4645 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4646 .pid_filter_count = 32,
4647 .pid_filter = dib90x0_pid_filter,
4648 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
4649 .frontend_attach = stk9090m_frontend_attach,
4650 .tuner_attach = dib9090_tuner_attach,
4652 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4655 sizeof(struct dib0700_adapter_state),
4659 .num_device_descs = 1,
4661 { "DiBcom STK9090M reference design",
4662 { &dib0700_usb_id_table[69], NULL },
4668 .rc_interval = DEFAULT_RC_INTERVAL,
4669 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4670 .module_name = "dib0700",
4671 .rc_query = dib0700_rc_query_old_firmware,
4672 .allowed_protos = RC_BIT_RC5 |
4675 .change_protocol = dib0700_change_protocol,
4677 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4683 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4684 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4685 .pid_filter_count = 32,
4686 .pid_filter = stk80xx_pid_filter,
4687 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4688 .frontend_attach = nim8096md_frontend_attach,
4689 .tuner_attach = nim8096md_tuner_attach,
4691 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4694 sizeof(struct dib0700_adapter_state),
4698 .num_device_descs = 1,
4700 { "DiBcom NIM8096MD reference design",
4701 { &dib0700_usb_id_table[70], NULL },
4707 .rc_interval = DEFAULT_RC_INTERVAL,
4708 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4709 .module_name = "dib0700",
4710 .rc_query = dib0700_rc_query_old_firmware,
4711 .allowed_protos = RC_BIT_RC5 |
4714 .change_protocol = dib0700_change_protocol,
4716 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4722 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4723 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4724 .pid_filter_count = 32,
4725 .pid_filter = dib90x0_pid_filter,
4726 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
4727 .frontend_attach = nim9090md_frontend_attach,
4728 .tuner_attach = nim9090md_tuner_attach,
4730 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4733 sizeof(struct dib0700_adapter_state),
4737 .num_device_descs = 1,
4739 { "DiBcom NIM9090MD reference design",
4740 { &dib0700_usb_id_table[71], NULL },
4746 .rc_interval = DEFAULT_RC_INTERVAL,
4747 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4748 .module_name = "dib0700",
4749 .rc_query = dib0700_rc_query_old_firmware,
4750 .allowed_protos = RC_BIT_RC5 |
4753 .change_protocol = dib0700_change_protocol,
4755 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4761 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4762 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4763 .pid_filter_count = 32,
4764 .pid_filter = stk70x0p_pid_filter,
4765 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4766 .frontend_attach = nim7090_frontend_attach,
4767 .tuner_attach = nim7090_tuner_attach,
4769 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4772 sizeof(struct dib0700_adapter_state),
4776 .num_device_descs = 1,
4778 { "DiBcom NIM7090 reference design",
4779 { &dib0700_usb_id_table[72], NULL },
4785 .rc_interval = DEFAULT_RC_INTERVAL,
4786 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4787 .module_name = "dib0700",
4788 .rc_query = dib0700_rc_query_old_firmware,
4789 .allowed_protos = RC_BIT_RC5 |
4792 .change_protocol = dib0700_change_protocol,
4794 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4800 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4801 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4802 .pid_filter_count = 32,
4803 .pid_filter = stk70x0p_pid_filter,
4804 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4805 .frontend_attach = tfe7090pvr_frontend0_attach,
4806 .tuner_attach = tfe7090pvr_tuner0_attach,
4808 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4811 sizeof(struct dib0700_adapter_state),
4816 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4817 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4818 .pid_filter_count = 32,
4819 .pid_filter = stk70x0p_pid_filter,
4820 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4821 .frontend_attach = tfe7090pvr_frontend1_attach,
4822 .tuner_attach = tfe7090pvr_tuner1_attach,
4824 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4827 sizeof(struct dib0700_adapter_state),
4831 .num_device_descs = 1,
4833 { "DiBcom TFE7090PVR reference design",
4834 { &dib0700_usb_id_table[73], NULL },
4840 .rc_interval = DEFAULT_RC_INTERVAL,
4841 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4842 .module_name = "dib0700",
4843 .rc_query = dib0700_rc_query_old_firmware,
4844 .allowed_protos = RC_BIT_RC5 |
4847 .change_protocol = dib0700_change_protocol,
4849 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4855 .frontend_attach = pctv340e_frontend_attach,
4856 .tuner_attach = xc4000_tuner_attach,
4858 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4860 .size_of_priv = sizeof(struct
4861 dib0700_adapter_state),
4865 .num_device_descs = 2,
4867 { "Pinnacle PCTV 340e HD Pro USB Stick",
4868 { &dib0700_usb_id_table[76], NULL },
4871 { "Pinnacle PCTV Hybrid Stick Solo",
4872 { &dib0700_usb_id_table[77], NULL },
4877 .rc_interval = DEFAULT_RC_INTERVAL,
4878 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4879 .module_name = "dib0700",
4880 .rc_query = dib0700_rc_query_old_firmware,
4881 .allowed_protos = RC_BIT_RC5 |
4884 .change_protocol = dib0700_change_protocol,
4886 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4892 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4893 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4894 .pid_filter_count = 32,
4895 .pid_filter = stk70x0p_pid_filter,
4896 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
4897 .frontend_attach = tfe7790p_frontend_attach,
4898 .tuner_attach = tfe7790p_tuner_attach,
4900 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
4904 sizeof(struct dib0700_adapter_state),
4908 .num_device_descs = 1,
4910 { "DiBcom TFE7790P reference design",
4911 { &dib0700_usb_id_table[78], NULL },
4917 .rc_interval = DEFAULT_RC_INTERVAL,
4918 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4919 .module_name = "dib0700",
4920 .rc_query = dib0700_rc_query_old_firmware,
4921 .allowed_protos = RC_BIT_RC5 |
4924 .change_protocol = dib0700_change_protocol,
4926 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
4932 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
4933 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
4934 .pid_filter_count = 32,
4935 .pid_filter = stk80xx_pid_filter,
4936 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
4937 .frontend_attach = tfe8096p_frontend_attach,
4938 .tuner_attach = tfe8096p_tuner_attach,
4940 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4945 sizeof(struct dib0700_adapter_state),
4949 .num_device_descs = 1,
4951 { "DiBcom TFE8096P reference design",
4952 { &dib0700_usb_id_table[79], NULL },
4958 .rc_interval = DEFAULT_RC_INTERVAL,
4959 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4960 .module_name = "dib0700",
4961 .rc_query = dib0700_rc_query_old_firmware,
4962 .allowed_protos = RC_BIT_RC5 |
4965 .change_protocol = dib0700_change_protocol,
4970 int dib0700_device_count = ARRAY_SIZE(dib0700_devices);