summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-ata11
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu1
-rw-r--r--Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator2
-rw-r--r--Documentation/admin-guide/hw-vuln/index.rst1
-rw-r--r--Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst246
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt37
-rw-r--r--Documentation/arm/tcm.rst2
-rw-r--r--Documentation/arm64/sme.rst2
-rw-r--r--Documentation/devicetree/bindings/clock/idt,versaclock5.yaml2
-rw-r--r--Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt2
-rw-r--r--Documentation/devicetree/bindings/display/arm,malidp.yaml7
-rw-r--r--Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml2
-rw-r--r--Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml5
-rw-r--r--Documentation/devicetree/bindings/hwmon/vexpress.txt2
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml1
-rw-r--r--Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml39
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml3
-rw-r--r--Documentation/devicetree/bindings/mfd/maxim,max77714.yaml2
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml2
-rw-r--r--Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml4
-rw-r--r--Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml1
-rw-r--r--Documentation/devicetree/bindings/phy/phy-stih407-usb.txt2
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml26
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml27
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml2
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml2
-rw-r--r--Documentation/devicetree/bindings/regulator/vexpress.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml1
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml1
-rw-r--r--Documentation/devicetree/bindings/usb/dwc3-st.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-st.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/ohci-st.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.yaml2
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml3
-rw-r--r--Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml1
-rw-r--r--Documentation/driver-api/gpio/board.rst2
-rw-r--r--Documentation/driver-api/gpio/consumer.rst6
-rw-r--r--Documentation/driver-api/gpio/intro.rst6
-rw-r--r--Documentation/driver-api/hte/hte.rst (renamed from Documentation/hte/hte.rst)0
-rw-r--r--Documentation/driver-api/hte/index.rst (renamed from Documentation/hte/index.rst)0
-rw-r--r--Documentation/driver-api/hte/tegra194-hte.rst (renamed from Documentation/hte/tegra194-hte.rst)0
-rw-r--r--Documentation/driver-api/index.rst1
-rw-r--r--Documentation/features/core/cBPF-JIT/arch-support.txt1
-rw-r--r--Documentation/features/core/eBPF-JIT/arch-support.txt1
-rw-r--r--Documentation/features/core/generic-idle-thread/arch-support.txt1
-rw-r--r--Documentation/features/core/jump-labels/arch-support.txt1
-rw-r--r--Documentation/features/core/thread-info-in-task/arch-support.txt1
-rw-r--r--Documentation/features/core/tracehook/arch-support.txt1
-rw-r--r--Documentation/features/debug/KASAN/arch-support.txt1
-rw-r--r--Documentation/features/debug/debug-vm-pgtable/arch-support.txt3
-rw-r--r--Documentation/features/debug/gcov-profile-all/arch-support.txt3
-rw-r--r--Documentation/features/debug/kcov/arch-support.txt1
-rw-r--r--Documentation/features/debug/kgdb/arch-support.txt1
-rw-r--r--Documentation/features/debug/kmemleak/arch-support.txt1
-rw-r--r--Documentation/features/debug/kprobes-on-ftrace/arch-support.txt1
-rw-r--r--Documentation/features/debug/kprobes/arch-support.txt1
-rw-r--r--Documentation/features/debug/kretprobes/arch-support.txt1
-rw-r--r--Documentation/features/debug/optprobes/arch-support.txt1
-rw-r--r--Documentation/features/debug/stackprotector/arch-support.txt1
-rw-r--r--Documentation/features/debug/uprobes/arch-support.txt1
-rw-r--r--Documentation/features/debug/user-ret-profiler/arch-support.txt1
-rw-r--r--Documentation/features/io/dma-contiguous/arch-support.txt1
-rw-r--r--Documentation/features/locking/cmpxchg-local/arch-support.txt1
-rw-r--r--Documentation/features/locking/lockdep/arch-support.txt1
-rw-r--r--Documentation/features/locking/queued-rwlocks/arch-support.txt3
-rw-r--r--Documentation/features/locking/queued-spinlocks/arch-support.txt1
-rw-r--r--Documentation/features/perf/kprobes-event/arch-support.txt3
-rw-r--r--Documentation/features/perf/perf-regs/arch-support.txt1
-rw-r--r--Documentation/features/perf/perf-stackdump/arch-support.txt1
-rw-r--r--Documentation/features/sched/membarrier-sync-core/arch-support.txt1
-rw-r--r--Documentation/features/sched/numa-balancing/arch-support.txt1
-rw-r--r--Documentation/features/seccomp/seccomp-filter/arch-support.txt1
-rw-r--r--Documentation/features/time/arch-tick-broadcast/arch-support.txt1
-rw-r--r--Documentation/features/time/clockevents/arch-support.txt1
-rw-r--r--Documentation/features/time/context-tracking/arch-support.txt1
-rw-r--r--Documentation/features/time/irq-time-acct/arch-support.txt1
-rw-r--r--Documentation/features/time/virt-cpuacct/arch-support.txt1
-rw-r--r--Documentation/features/vm/ELF-ASLR/arch-support.txt1
-rw-r--r--Documentation/features/vm/PG_uncached/arch-support.txt1
-rw-r--r--Documentation/features/vm/THP/arch-support.txt1
-rw-r--r--Documentation/features/vm/TLB/arch-support.txt1
-rw-r--r--Documentation/features/vm/huge-vmap/arch-support.txt1
-rw-r--r--Documentation/features/vm/ioremap_prot/arch-support.txt1
-rw-r--r--Documentation/features/vm/pte_special/arch-support.txt3
-rw-r--r--Documentation/filesystems/ext4/attributes.rst68
-rw-r--r--Documentation/filesystems/ext4/bigalloc.rst2
-rw-r--r--Documentation/filesystems/ext4/bitmaps.rst6
-rw-r--r--Documentation/filesystems/ext4/blockgroup.rst30
-rw-r--r--Documentation/filesystems/ext4/blockmap.rst2
-rw-r--r--Documentation/filesystems/ext4/checksums.rst26
-rw-r--r--Documentation/filesystems/ext4/directory.rst166
-rw-r--r--Documentation/filesystems/ext4/eainode.rst10
-rw-r--r--Documentation/filesystems/ext4/group_descr.rst126
-rw-r--r--Documentation/filesystems/ext4/ifork.rst60
-rw-r--r--Documentation/filesystems/ext4/inlinedata.rst8
-rw-r--r--Documentation/filesystems/ext4/inodes.rst306
-rw-r--r--Documentation/filesystems/ext4/journal.rst214
-rw-r--r--Documentation/filesystems/ext4/mmp.rst36
-rw-r--r--Documentation/filesystems/ext4/overview.rst2
-rw-r--r--Documentation/filesystems/ext4/special_inodes.rst8
-rw-r--r--Documentation/filesystems/ext4/super.rst550
-rw-r--r--Documentation/filesystems/netfs_library.rst68
-rw-r--r--Documentation/index.rst1
-rw-r--r--Documentation/loongarch/introduction.rst15
-rw-r--r--Documentation/loongarch/irq-chip-model.rst22
-rw-r--r--Documentation/networking/ip-sysctl.rst37
-rw-r--r--Documentation/networking/phy.rst2
-rw-r--r--Documentation/process/changes.rst12
-rw-r--r--Documentation/translations/zh_CN/loongarch/introduction.rst14
-rw-r--r--Documentation/translations/zh_CN/loongarch/irq-chip-model.rst14
-rw-r--r--Documentation/usb/usbmon.rst2
-rw-r--r--MAINTAINERS135
-rw-r--r--Makefile6
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts5
-rw-r--r--arch/arm/include/asm/xen/xen-ops.h2
-rw-r--r--arch/arm/mm/dma-mapping.c7
-rw-r--r--arch/arm/xen/enlighten.c2
-rw-r--r--arch/arm64/include/asm/kvm_host.h5
-rw-r--r--arch/arm64/include/asm/sysreg.h4
-rw-r--r--arch/arm64/include/asm/virt.h3
-rw-r--r--arch/arm64/include/asm/xen/xen-ops.h2
-rw-r--r--arch/arm64/kernel/cpufeature.c11
-rw-r--r--arch/arm64/kernel/entry-ftrace.S1
-rw-r--r--arch/arm64/kernel/fpsimd.c20
-rw-r--r--arch/arm64/kernel/ftrace.c137
-rw-r--r--arch/arm64/kernel/mte.c6
-rw-r--r--arch/arm64/kernel/setup.c7
-rw-r--r--arch/arm64/kvm/arch_timer.c3
-rw-r--r--arch/arm64/kvm/arm.c16
-rw-r--r--arch/arm64/kvm/fpsimd.c2
-rw-r--r--arch/arm64/kvm/hyp/nvhe/mem_protect.c4
-rw-r--r--arch/arm64/kvm/hyp/nvhe/sys_regs.c42
-rw-r--r--arch/arm64/kvm/vgic/vgic-mmio-v2.c4
-rw-r--r--arch/arm64/kvm/vgic/vgic-mmio-v3.c40
-rw-r--r--arch/arm64/kvm/vgic/vgic-mmio.c40
-rw-r--r--arch/arm64/kvm/vgic/vgic-mmio.h3
-rw-r--r--arch/arm64/kvm/vmid.c2
-rw-r--r--arch/arm64/mm/cache.S2
-rw-r--r--arch/arm64/mm/dma-mapping.c7
-rw-r--r--arch/arm64/net/bpf_jit_comp.c1
-rwxr-xr-xarch/arm64/tools/gen-sysreg.awk2
-rw-r--r--arch/loongarch/Kconfig1
-rw-r--r--arch/loongarch/include/asm/hardirq.h2
-rw-r--r--arch/loongarch/include/asm/percpu.h1
-rw-r--r--arch/loongarch/include/asm/smp.h23
-rw-r--r--arch/loongarch/include/asm/timex.h7
-rw-r--r--arch/loongarch/kernel/acpi.c4
-rw-r--r--arch/loongarch/kernel/cacheinfo.c1
-rw-r--r--arch/loongarch/kernel/irq.c7
-rw-r--r--arch/loongarch/kernel/process.c14
-rw-r--r--arch/loongarch/kernel/setup.c5
-rw-r--r--arch/loongarch/kernel/smp.c2
-rw-r--r--arch/loongarch/kernel/vmlinux.lds.S1
-rw-r--r--arch/mips/boot/dts/ingenic/x1000.dtsi5
-rw-r--r--arch/mips/boot/dts/ingenic/x1830.dtsi5
-rw-r--r--arch/mips/generic/board-ranchu.c1
-rw-r--r--arch/mips/lantiq/falcon/sysctrl.c6
-rw-r--r--arch/mips/lantiq/irq.c1
-rw-r--r--arch/mips/lantiq/xway/sysctrl.c4
-rw-r--r--arch/mips/mti-malta/malta-time.c2
-rw-r--r--arch/mips/pic32/pic32mzda/init.c7
-rw-r--r--arch/mips/pic32/pic32mzda/time.c3
-rw-r--r--arch/mips/ralink/of.c2
-rw-r--r--arch/mips/vr41xx/common/icu.c2
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/include/asm/thread_info.h10
-rw-r--r--arch/powerpc/kernel/Makefile2
-rw-r--r--arch/powerpc/kernel/process.c4
-rw-r--r--arch/powerpc/kernel/ptrace/ptrace-fpu.c20
-rw-r--r--arch/powerpc/kernel/ptrace/ptrace.c3
-rw-r--r--arch/powerpc/kernel/rtas.c4
-rw-r--r--arch/powerpc/kexec/crash.c2
-rw-r--r--arch/powerpc/mm/nohash/kaslr_booke.c8
-rw-r--r--arch/powerpc/platforms/powernv/Makefile1
-rw-r--r--arch/powerpc/platforms/pseries/papr_scm.c3
-rw-r--r--arch/riscv/Kconfig9
-rw-r--r--arch/riscv/Kconfig.erratas1
-rw-r--r--arch/riscv/boot/dts/microchip/mpfs.dtsi9
-rw-r--r--arch/riscv/include/asm/errata_list.h14
-rw-r--r--arch/riscv/kernel/cpufeature.c5
-rw-r--r--arch/riscv/kvm/vmid.c2
-rw-r--r--arch/s390/Kconfig2
-rw-r--r--arch/s390/Makefile10
-rw-r--r--arch/s390/kernel/crash_dump.c10
-rw-r--r--arch/s390/kernel/perf_cpum_cf.c22
-rw-r--r--arch/s390/kernel/perf_pai_crypto.c20
-rw-r--r--arch/s390/mm/init.c13
-rw-r--r--arch/um/drivers/virt-pci.c7
-rw-r--r--arch/x86/Kconfig1
-rw-r--r--arch/x86/coco/tdx/tdx.c187
-rw-r--r--arch/x86/hyperv/hv_init.c6
-rw-r--r--arch/x86/hyperv/ivm.c84
-rw-r--r--arch/x86/include/asm/cpufeatures.h1
-rw-r--r--arch/x86/include/asm/e820/api.h5
-rw-r--r--arch/x86/include/asm/efi.h2
-rw-r--r--arch/x86/include/asm/kvm_host.h70
-rw-r--r--arch/x86/include/asm/mshyperv.h4
-rw-r--r--arch/x86/include/asm/msr-index.h25
-rw-r--r--arch/x86/include/asm/nospec-branch.h2
-rw-r--r--arch/x86/include/asm/pci_x86.h8
-rw-r--r--arch/x86/include/asm/setup.h38
-rw-r--r--arch/x86/include/asm/uaccess.h2
-rw-r--r--arch/x86/kernel/Makefile4
-rw-r--r--arch/x86/kernel/cpu/bugs.c235
-rw-r--r--arch/x86/kernel/cpu/common.c52
-rw-r--r--arch/x86/kernel/ftrace_64.S11
-rw-r--r--arch/x86/kernel/resource.c14
-rw-r--r--arch/x86/kernel/setup.c5
-rw-r--r--arch/x86/kernel/vmlinux.lds.S4
-rw-r--r--arch/x86/kvm/lapic.c27
-rw-r--r--arch/x86/kvm/mmu/mmu.c4
-rw-r--r--arch/x86/kvm/mmu/tdp_iter.c9
-rw-r--r--arch/x86/kvm/mmu/tdp_iter.h1
-rw-r--r--arch/x86/kvm/mmu/tdp_mmu.c38
-rw-r--r--arch/x86/kvm/svm/avic.c171
-rw-r--r--arch/x86/kvm/svm/nested.c43
-rw-r--r--arch/x86/kvm/svm/sev.c72
-rw-r--r--arch/x86/kvm/svm/svm.c53
-rw-r--r--arch/x86/kvm/svm/svm.h8
-rw-r--r--arch/x86/kvm/vmx/vmx.c77
-rw-r--r--arch/x86/kvm/vmx/vmx.h2
-rw-r--r--arch/x86/kvm/x86.c53
-rw-r--r--arch/x86/kvm/xen.h6
-rw-r--r--arch/x86/mm/mem_encrypt.c7
-rw-r--r--arch/x86/mm/mem_encrypt_amd.c4
-rw-r--r--arch/x86/net/bpf_jit_comp.c3
-rw-r--r--arch/x86/pci/acpi.c8
-rw-r--r--arch/x86/xen/enlighten_hvm.c2
-rw-r--r--arch/x86/xen/enlighten_pv.c2
-rw-r--r--block/bfq-iosched.c6
-rw-r--r--block/bio.c20
-rw-r--r--block/blk-core.c13
-rw-r--r--block/blk-ia-ranges.c1
-rw-r--r--block/blk-mq-debugfs.c29
-rw-r--r--block/blk-mq-debugfs.h10
-rw-r--r--block/blk-mq-sched.c12
-rw-r--r--block/blk-mq.c40
-rw-r--r--block/blk-rq-qos.c2
-rw-r--r--block/blk-rq-qos.h7
-rw-r--r--block/blk-sysfs.c30
-rw-r--r--block/genhd.c42
-rw-r--r--block/holder.c4
-rw-r--r--block/kyber-iosched.c3
-rw-r--r--block/mq-deadline.c3
-rw-r--r--certs/.gitignore2
-rw-r--r--certs/Makefile24
-rw-r--r--certs/blacklist.c8
-rw-r--r--certs/blacklist_hashes.c4
-rw-r--r--certs/common.h9
-rw-r--r--certs/extract-cert.c7
-rw-r--r--certs/system_keyring.c6
-rw-r--r--crypto/Kconfig1
-rw-r--r--crypto/Makefile2
-rw-r--r--crypto/asymmetric_keys/Kconfig10
-rw-r--r--crypto/asymmetric_keys/Makefile2
-rw-r--r--crypto/asymmetric_keys/selftest.c224
-rw-r--r--crypto/asymmetric_keys/x509_loader.c (renamed from certs/common.c)8
-rw-r--r--crypto/asymmetric_keys/x509_parser.h9
-rw-r--r--crypto/asymmetric_keys/x509_public_key.c8
-rw-r--r--drivers/ata/libata-core.c25
-rw-r--r--drivers/ata/libata-scsi.c2
-rw-r--r--drivers/ata/libata-transport.c2
-rw-r--r--drivers/ata/pata_octeon_cf.c3
-rw-r--r--drivers/base/cpu.c8
-rw-r--r--drivers/base/init.c2
-rw-r--r--drivers/base/regmap/regmap-irq.c8
-rw-r--r--drivers/base/regmap/regmap.c15
-rw-r--r--drivers/block/xen-blkfront.c19
-rw-r--r--drivers/bus/fsl-mc/fsl-mc-bus.c6
-rw-r--r--drivers/char/Kconfig50
-rw-r--r--drivers/char/hw_random/virtio-rng.c2
-rw-r--r--drivers/char/lp.c2
-rw-r--r--drivers/char/random.c45
-rw-r--r--drivers/clocksource/hyperv_timer.c1
-rw-r--r--drivers/comedi/drivers/vmk80xx.c2
-rw-r--r--drivers/dma-buf/udmabuf.c5
-rw-r--r--drivers/firewire/core-cdev.c2
-rw-r--r--drivers/firewire/core-device.c6
-rw-r--r--drivers/firmware/efi/sysfb_efi.c2
-rw-r--r--drivers/gpio/gpio-crystalcove.c70
-rw-r--r--drivers/gpio/gpio-dln2.c23
-rw-r--r--drivers/gpio/gpio-dwapb.c7
-rw-r--r--drivers/gpio/gpio-grgpio.c14
-rw-r--r--drivers/gpio/gpio-merrifield.c22
-rw-r--r--drivers/gpio/gpio-mxs.c2
-rw-r--r--drivers/gpio/gpio-realtek-otto.c10
-rw-r--r--drivers/gpio/gpio-sch.c35
-rw-r--r--drivers/gpio/gpio-vr41xx.c2
-rw-r--r--drivers/gpio/gpio-wcove.c10
-rw-r--r--drivers/gpio/gpio-winbond.c7
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c13
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c9
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c4
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c2
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c32
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c20
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c13
-rw-r--r--drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c6
-rw-r--r--drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c6
-rw-r--r--drivers/gpu/drm/amd/amdgpu/imu_v11_0.c2
-rw-r--r--drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.c6
-rw-r--r--drivers/gpu/drm/amd/amdgpu/jpeg_v2_0.h1
-rw-r--r--drivers/gpu/drm/amd/amdgpu/mes_v11_0.c36
-rw-r--r--drivers/gpu/drm/amd/amdgpu/nv.c1
-rw-r--r--drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c109
-rw-r--r--drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c17
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_crat.c2
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_device.c18
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_migrate.c6
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_svm.c5
-rw-r--r--drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c8
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c11
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.h2
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c9
-rw-r--r--drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c3
-rw-r--r--drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c108
-rw-r--r--drivers/gpu/drm/amd/display/dc/dc.h5
-rw-r--r--drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c24
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dpp.c3
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn201/dcn201_dpp.c3
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp.c3
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c68
-rw-r--r--drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c4
-rw-r--r--drivers/gpu/drm/amd/display/dc/dml/dml_wrapper.c2
-rw-r--r--drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h1
-rw-r--r--drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h18
-rw-r--r--drivers/gpu/drm/amd/display/dc/link/link_hwss_hpo_dp.c19
-rw-r--r--drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.c11
-rw-r--r--drivers/gpu/drm/amd/display/dmub/src/dmub_dcn31.h3
-rw-r--r--drivers/gpu/drm/amd/display/include/ddc_service_types.h2
-rw-r--r--drivers/gpu/drm/amd/pm/swsmu/inc/smu_v11_0_7_pptable.h9
-rw-r--r--drivers/gpu/drm/amd/pm/swsmu/inc/smu_v11_0_pptable.h9
-rw-r--r--drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0_7_pptable.h5
-rw-r--r--drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0_pptable.h10
-rw-r--r--drivers/gpu/drm/ast/ast_dp.c5
-rw-r--r--drivers/gpu/drm/ast/ast_dp501.c2
-rw-r--r--drivers/gpu/drm/ast/ast_drv.h9
-rw-r--r--drivers/gpu/drm/ast/ast_main.c21
-rw-r--r--drivers/gpu/drm/ast/ast_mode.c38
-rw-r--r--drivers/gpu/drm/ast/ast_post.c2
-rw-r--r--drivers/gpu/drm/bridge/analogix/analogix_dp_core.c42
-rw-r--r--drivers/gpu/drm/bridge/ti-sn65dsi83.c2
-rw-r--r--drivers/gpu/drm/drm_atomic_helper.c16
-rw-r--r--drivers/gpu/drm/drm_panel_orientation_quirks.c6
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_drv.c6
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_mic.c42
-rw-r--r--drivers/gpu/drm/i915/display/intel_dp.c32
-rw-r--r--drivers/gpu/drm/i915/display/intel_dpll_mgr.c4
-rw-r--r--drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c3
-rw-r--r--drivers/gpu/drm/i915/gt/intel_gt.c1
-rw-r--r--drivers/gpu/drm/i915/gt/intel_gt_sysfs.c29
-rw-r--r--drivers/gpu/drm/i915/gt/intel_gt_sysfs.h6
-rw-r--r--drivers/gpu/drm/i915/gt/intel_gt_types.h3
-rw-r--r--drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c2
-rw-r--r--drivers/gpu/drm/i915/i915_drm_client.c5
-rw-r--r--drivers/gpu/drm/i915/i915_sysfs.c17
-rw-r--r--drivers/gpu/drm/i915/i915_vma.c48
-rw-r--r--drivers/gpu/drm/imx/ipuv3-crtc.c2
-rw-r--r--drivers/gpu/drm/msm/adreno/adreno_gpu.c14
-rw-r--r--drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c9
-rw-r--r--drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c2
-rw-r--r--drivers/gpu/drm/msm/dp/dp_ctrl.c33
-rw-r--r--drivers/gpu/drm/msm/dp/dp_ctrl.h2
-rw-r--r--drivers/gpu/drm/msm/dp/dp_display.c16
-rw-r--r--drivers/gpu/drm/msm/msm_drv.c2
-rw-r--r--drivers/gpu/drm/msm/msm_drv.h1
-rw-r--r--drivers/gpu/drm/msm/msm_fence.c8
-rw-r--r--drivers/gpu/drm/msm/msm_gem.c7
-rw-r--r--drivers/gpu/drm/msm/msm_gem.h11
-rw-r--r--drivers/gpu/drm/msm/msm_gem_prime.c15
-rw-r--r--drivers/gpu/drm/msm/msm_gem_submit.c18
-rw-r--r--drivers/gpu/drm/msm/msm_gem_vma.c6
-rw-r--r--drivers/gpu/drm/msm/msm_gpu.c27
-rw-r--r--drivers/gpu/drm/msm/msm_iommu.c2
-rw-r--r--drivers/gpu/drm/msm/msm_ringbuffer.c2
-rw-r--r--drivers/gpu/drm/panfrost/panfrost_drv.c5
-rw-r--r--drivers/gpu/drm/panfrost/panfrost_job.c6
-rw-r--r--drivers/gpu/drm/panfrost/panfrost_job.h2
-rw-r--r--drivers/gpu/drm/sun4i/sun4i_drv.c12
-rw-r--r--drivers/gpu/drm/sun4i/sun4i_layer.c2
-rw-r--r--drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c54
-rw-r--r--drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h2
-rw-r--r--drivers/gpu/drm/ttm/ttm_bo.c22
-rw-r--r--drivers/gpu/drm/ttm/ttm_device.c6
-rw-r--r--drivers/gpu/drm/ttm/ttm_resource.c52
-rw-r--r--drivers/gpu/drm/vc4/vc4_bo.c62
-rw-r--r--drivers/gpu/drm/vc4/vc4_crtc.c196
-rw-r--r--drivers/gpu/drm/vc4/vc4_drv.c97
-rw-r--r--drivers/gpu/drm/vc4/vc4_drv.h19
-rw-r--r--drivers/gpu/drm/vc4/vc4_gem.c40
-rw-r--r--drivers/gpu/drm/vc4/vc4_hdmi.c2
-rw-r--r--drivers/gpu/drm/vc4/vc4_hvs.c18
-rw-r--r--drivers/gpu/drm/vc4/vc4_irq.c16
-rw-r--r--drivers/gpu/drm/vc4/vc4_kms.c24
-rw-r--r--drivers/gpu/drm/vc4/vc4_perfmon.c47
-rw-r--r--drivers/gpu/drm/vc4/vc4_plane.c29
-rw-r--r--drivers/gpu/drm/vc4/vc4_render_cl.c4
-rw-r--r--drivers/gpu/drm/vc4/vc4_v3d.c15
-rw-r--r--drivers/gpu/drm/vc4/vc4_validate.c16
-rw-r--r--drivers/gpu/drm/vc4/vc4_validate_shaders.c4
-rw-r--r--drivers/gpu/drm/xen/xen_drm_front_gem.c2
-rw-r--r--drivers/hid/hid-hyperv.c5
-rw-r--r--drivers/hv/channel_mgmt.c18
-rw-r--r--drivers/hv/hv_kvp.c2
-rw-r--r--drivers/hv/vmbus_drv.c4
-rw-r--r--drivers/hwmon/asus-ec-sensors.c2
-rw-r--r--drivers/hwmon/occ/common.c5
-rw-r--r--drivers/i2c/busses/i2c-designware-common.c3
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c13
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c9
-rw-r--r--drivers/i2c/busses/i2c-npcm7xx.c3
-rw-r--r--drivers/idle/intel_idle.c32
-rw-r--r--drivers/input/joystick/Kconfig1
-rw-r--r--drivers/input/misc/soc_button_array.c4
-rw-r--r--drivers/input/mouse/bcm5974.c7
-rw-r--r--drivers/iommu/ipmmu-vmsa.c2
-rw-r--r--drivers/irqchip/Kconfig2
-rw-r--r--drivers/irqchip/irq-apple-aic.c2
-rw-r--r--drivers/irqchip/irq-gic-realview.c1
-rw-r--r--drivers/irqchip/irq-gic-v3.c7
-rw-r--r--drivers/irqchip/irq-loongson-liointc.c8
-rw-r--r--drivers/irqchip/irq-realtek-rtl.c2
-rw-r--r--drivers/irqchip/irq-uniphier-aidet.c1
-rw-r--r--drivers/md/dm-core.h12
-rw-r--r--drivers/md/dm-era-target.c8
-rw-r--r--drivers/md/dm-log.c5
-rw-r--r--drivers/md/dm-raid.c2
-rw-r--r--drivers/md/dm-rq.c2
-rw-r--r--drivers/md/dm-table.c11
-rw-r--r--drivers/md/dm.c149
-rw-r--r--drivers/md/dm.h2
-rw-r--r--drivers/md/md.c14
-rw-r--r--drivers/md/md.h2
-rw-r--r--drivers/md/raid5-ppl.c4
-rw-r--r--drivers/misc/atmel-ssc.c4
-rw-r--r--drivers/misc/cardreader/rts5261.c2
-rw-r--r--drivers/misc/eeprom/at25.c93
-rw-r--r--drivers/misc/mei/hbm.c3
-rw-r--r--drivers/misc/mei/hw-me-regs.h2
-rw-r--r--drivers/misc/mei/hw-me.c2
-rw-r--r--drivers/misc/mei/pci-me.c2
-rw-r--r--drivers/mmc/core/block.c3
-rw-r--r--drivers/mmc/host/mtk-sd.c20
-rw-r--r--drivers/mmc/host/sdhci-pci-gli.c3
-rw-r--r--drivers/mmc/host/sdhci-pci-o2micro.c2
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c2
-rw-r--r--drivers/mtd/nand/raw/nand_ids.c3
-rw-r--r--drivers/net/amt.c59
-rw-r--r--drivers/net/bonding/bond_main.c4
-rw-r--r--drivers/net/dsa/lantiq_gswip.c4
-rw-r--r--drivers/net/dsa/mv88e6xxx/serdes.c35
-rw-r--r--drivers/net/dsa/qca8k.c22
-rw-r--r--drivers/net/dsa/qca8k.h2
-rw-r--r--drivers/net/dsa/realtek/rtl8365mb.c38
-rw-r--r--drivers/net/ethernet/altera/altera_tse_main.c6
-rw-r--r--drivers/net/ethernet/amd/au1000_eth.c22
-rw-r--r--drivers/net/ethernet/amd/au1000_eth.h4
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-drv.c2
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-platform.c4
-rw-r--r--drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c1
-rw-r--r--drivers/net/ethernet/broadcom/bgmac-bcma.c1
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hnae3.h1
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c2
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c18
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c101
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h1
-rw-r--r--drivers/net/ethernet/huawei/hinic/hinic_devlink.c4
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ethtool.c25
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c5
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c2
-rw-r--r--drivers/net/ethernet/intel/iavf/iavf_main.c2
-rw-r--r--drivers/net/ethernet/intel/ice/ice_ethtool.c49
-rw-r--r--drivers/net/ethernet/intel/ice/ice_lib.c42
-rw-r--r--drivers/net/ethernet/intel/ice/ice_main.c49
-rw-r--r--drivers/net/ethernet/intel/ice/ice_ptp.c2
-rw-r--r--drivers/net/ethernet/intel/ice/ice_ptp.h31
-rw-r--r--drivers/net/ethernet/intel/ice/ice_tc_lib.c5
-rw-r--r--drivers/net/ethernet/intel/ice/ice_vf_lib.c5
-rw-r--r--drivers/net/ethernet/intel/ice/ice_virtchnl.c53
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c19
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c8
-rw-r--r--drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c3
-rw-r--r--drivers/net/ethernet/mediatek/mtk_eth_soc.c21
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_ethtool.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/dev.c18
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c7
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en/params.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_common.c5
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/en_rep.c31
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c9
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/fs_core.c35
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h10
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h1
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.h2
-rw-r--r--drivers/net/ethernet/netronome/nfp/flower/conntrack.c32
-rw-r--r--drivers/net/ethernet/netronome/nfp/flower/match.c16
-rw-r--r--drivers/net/ethernet/netronome/nfp/nfp_net_sriov.c28
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c4
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet.h51
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_main.c29
-rw-r--r--drivers/net/hamradio/6pack.c9
-rw-r--r--drivers/net/phy/aquantia_main.c15
-rw-r--r--drivers/net/phy/at803x.c6
-rw-r--r--drivers/net/phy/dp83867.c29
-rw-r--r--drivers/net/phy/mdio_bus.c1
-rw-r--r--drivers/net/phy/smsc.c6
-rw-r--r--drivers/net/usb/ax88179_178a.c26
-rw-r--r--drivers/net/veth.c4
-rw-r--r--drivers/net/virtio_net.c25
-rw-r--r--drivers/nfc/nfcmrvl/usb.c16
-rw-r--r--drivers/nfc/st21nfca/se.c53
-rw-r--r--drivers/nvme/host/core.c19
-rw-r--r--drivers/nvme/host/nvme.h28
-rw-r--r--drivers/nvme/host/pci.c49
-rw-r--r--drivers/platform/mellanox/Kconfig2
-rw-r--r--drivers/platform/mellanox/nvsw-sn2201.c2
-rw-r--r--drivers/platform/mips/Kconfig2
-rw-r--r--drivers/platform/x86/barco-p50-gpio.c5
-rw-r--r--drivers/platform/x86/gigabyte-wmi.c2
-rw-r--r--drivers/platform/x86/hp-wmi.c29
-rw-r--r--drivers/platform/x86/intel/hid.c6
-rw-r--r--drivers/platform/x86/intel/pmc/core.c1
-rw-r--r--drivers/platform/x86/intel/pmt/crashlog.c2
-rw-r--r--drivers/regulator/qcom_smd-regulator.c8
-rw-r--r--drivers/scsi/ibmvscsi/ibmvfc.c82
-rw-r--r--drivers/scsi/ibmvscsi/ibmvfc.h2
-rw-r--r--drivers/scsi/ipr.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h4
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c21
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h3
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c3
-rw-r--r--drivers/scsi/lpfc/lpfc_nvme.c52
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c6
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c25
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h2
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c23
-rw-r--r--drivers/scsi/pmcraid.c2
-rw-r--r--drivers/scsi/scsi_debug.c22
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c7
-rw-r--r--drivers/scsi/sd.c2
-rw-r--r--drivers/scsi/storvsc_drv.c27
-rw-r--r--drivers/scsi/vmw_pvscsi.h4
-rw-r--r--drivers/spi/spi-cadence.c37
-rw-r--r--drivers/spi/spi-mem.c2
-rw-r--r--drivers/spi/spi-rockchip.c11
-rw-r--r--drivers/staging/olpc_dcon/Kconfig2
-rw-r--r--drivers/staging/r8188eu/core/rtw_xmit.c20
-rw-r--r--drivers/staging/r8188eu/os_dep/ioctl_linux.c2
-rw-r--r--drivers/staging/rtl8723bs/os_dep/ioctl_linux.c6
-rw-r--r--drivers/tty/goldfish.c2
-rw-r--r--drivers/tty/n_gsm.c2
-rw-r--r--drivers/tty/serial/8250/8250_port.c2
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c1
-rw-r--r--drivers/tty/serial/serial_core.c9
-rw-r--r--drivers/tty/sysrq.c2
-rw-r--r--drivers/ufs/core/ufshcd.c76
-rw-r--r--drivers/usb/cdns3/cdnsp-ring.c19
-rw-r--r--drivers/usb/dwc2/hcd.c2
-rw-r--r--drivers/usb/dwc3/core.c9
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c1
-rw-r--r--drivers/usb/dwc3/gadget.c26
-rw-r--r--drivers/usb/gadget/function/f_fs.c40
-rw-r--r--drivers/usb/gadget/function/u_ether.c12
-rw-r--r--drivers/usb/gadget/udc/lpc32xx_udc.c1
-rw-r--r--drivers/usb/host/xhci.c15
-rw-r--r--drivers/usb/serial/io_ti.c2
-rw-r--r--drivers/usb/serial/io_usbvend.h1
-rw-r--r--drivers/usb/serial/option.c6
-rw-r--r--drivers/vdpa/mlx5/net/mlx5_vnet.c9
-rw-r--r--drivers/vdpa/vdpa_user/vduse_dev.c7
-rw-r--r--drivers/vhost/vdpa.c2
-rw-r--r--drivers/vhost/vringh.c10
-rw-r--r--drivers/virtio/Kconfig6
-rw-r--r--drivers/virtio/virtio.c5
-rw-r--r--drivers/virtio/virtio_mmio.c3
-rw-r--r--drivers/virtio/virtio_pci_modern_dev.c2
-rw-r--r--drivers/watchdog/gxp-wdt.c1
-rw-r--r--drivers/xen/Kconfig20
-rw-r--r--drivers/xen/Makefile2
-rw-r--r--drivers/xen/features.c2
-rw-r--r--drivers/xen/gntdev-common.h7
-rw-r--r--drivers/xen/gntdev.c157
-rw-r--r--drivers/xen/grant-dma-iommu.c78
-rw-r--r--drivers/xen/grant-dma-ops.c346
-rw-r--r--drivers/xen/grant-table.c251
-rw-r--r--drivers/xen/xlate_mmu.c1
-rw-r--r--fs/9p/cache.c4
-rw-r--r--fs/9p/fid.c22
-rw-r--r--fs/9p/v9fs.c2
-rw-r--r--fs/9p/v9fs.h10
-rw-r--r--fs/9p/vfs_addr.c28
-rw-r--r--fs/9p/vfs_inode.c13
-rw-r--r--fs/9p/vfs_inode_dotl.c3
-rw-r--r--fs/afs/callback.c2
-rw-r--r--fs/afs/dir.c32
-rw-r--r--fs/afs/dir_edit.c10
-rw-r--r--fs/afs/dir_silly.c4
-rw-r--r--fs/afs/dynroot.c2
-rw-r--r--fs/afs/file.c10
-rw-r--r--fs/afs/fs_operation.c6
-rw-r--r--fs/afs/inode.c41
-rw-r--r--fs/afs/internal.h23
-rw-r--r--fs/afs/super.c6
-rw-r--r--fs/afs/volume.c3
-rw-r--r--fs/afs/write.c23
-rw-r--r--fs/attr.c26
-rw-r--r--fs/btrfs/disk-io.c13
-rw-r--r--fs/btrfs/super.c47
-rw-r--r--fs/ceph/addr.c16
-rw-r--r--fs/ceph/cache.c4
-rw-r--r--fs/ceph/cache.h2
-rw-r--r--fs/ceph/caps.c104
-rw-r--r--fs/ceph/file.c2
-rw-r--r--fs/ceph/inode.c10
-rw-r--r--fs/ceph/mds_client.c4
-rw-r--r--fs/ceph/snap.c8
-rw-r--r--fs/ceph/super.c2
-rw-r--r--fs/ceph/super.h10
-rw-r--r--fs/ceph/xattr.c14
-rw-r--r--fs/cifs/cifsfs.c10
-rw-r--r--fs/cifs/cifsfs.h2
-rw-r--r--fs/cifs/cifsglob.h12
-rw-r--r--fs/cifs/connect.c4
-rw-r--r--fs/cifs/file.c8
-rw-r--r--fs/cifs/fscache.c8
-rw-r--r--fs/cifs/fscache.h10
-rw-r--r--fs/cifs/inode.c4
-rw-r--r--fs/cifs/misc.c31
-rw-r--r--fs/cifs/sess.c8
-rw-r--r--fs/cifs/smb2ops.c8
-rw-r--r--fs/cifs/smb2pdu.c5
-rw-r--r--fs/cifs/trace.h38
-rw-r--r--fs/ext2/dir.c9
-rw-r--r--fs/ext2/inode.c2
-rw-r--r--fs/ext4/inode.c2
-rw-r--r--fs/ext4/mballoc.c26
-rw-r--r--fs/ext4/migrate.c2
-rw-r--r--fs/ext4/namei.c3
-rw-r--r--fs/ext4/page-io.c2
-rw-r--r--fs/ext4/resize.c10
-rw-r--r--fs/ext4/super.c172
-rw-r--r--fs/ext4/xattr.c3
-rw-r--r--fs/fs-writeback.c37
-rw-r--r--fs/inode.c2
-rw-r--r--fs/io_uring.c373
-rw-r--r--fs/jbd2/transaction.c2
-rw-r--r--fs/netfs/buffered_read.c9
-rw-r--r--fs/netfs/internal.h2
-rw-r--r--fs/netfs/objects.c8
-rw-r--r--fs/nfs/callback_proc.c1
-rw-r--r--fs/nfs/dir.c1
-rw-r--r--fs/nfs/nfs4file.c1
-rw-r--r--fs/nfs/pnfs.c21
-rw-r--r--fs/nfs/pnfs.h1
-rw-r--r--fs/nfsd/filecache.c9
-rw-r--r--fs/quota/dquot.c10
-rw-r--r--fs/tracefs/inode.c2
-rw-r--r--fs/xfs/libxfs/xfs_attr.c9
-rw-r--r--fs/xfs/libxfs/xfs_attr.h12
-rw-r--r--fs/xfs/libxfs/xfs_attr_leaf.c2
-rw-r--r--fs/xfs/libxfs/xfs_da_btree.h4
-rw-r--r--fs/xfs/xfs_attr_item.c15
-rw-r--r--fs/xfs/xfs_ioctl.c3
-rw-r--r--fs/xfs/xfs_xattr.c17
-rw-r--r--fs/zonefs/super.c111
-rw-r--r--include/asm-generic/Kbuild1
-rw-r--r--include/asm-generic/platform-feature.h8
-rw-r--r--include/drm/drm_atomic.h1
-rw-r--r--include/drm/ttm/ttm_resource.h8
-rw-r--r--include/keys/asymmetric-type.h3
-rw-r--r--include/linux/backing-dev.h2
-rw-r--r--include/linux/bio.h1
-rw-r--r--include/linux/blkdev.h13
-rw-r--r--include/linux/console.h17
-rw-r--r--include/linux/cpu.h3
-rw-r--r--include/linux/crc-itu-t.h2
-rw-r--r--include/linux/gpio/driver.h29
-rw-r--r--include/linux/libata.h1
-rw-r--r--include/linux/mm_types.h5
-rw-r--r--include/linux/netfs.h58
-rw-r--r--include/linux/nvme.h4
-rw-r--r--include/linux/objtool.h6
-rw-r--r--include/linux/platform-feature.h19
-rw-r--r--include/linux/printk.h11
-rw-r--r--include/linux/random.h3
-rw-r--r--include/linux/ratelimit_types.h12
-rw-r--r--include/linux/serial_core.h1
-rw-r--r--include/linux/sunrpc/xdr.h16
-rw-r--r--include/linux/vdpa.h5
-rw-r--r--include/linux/virtio_config.h9
-rw-r--r--include/linux/visorbus.h344
-rw-r--r--include/linux/vmalloc.h1
-rw-r--r--include/linux/workqueue.h66
-rw-r--r--include/linux/xarray.h1
-rw-r--r--include/net/flow_offload.h1
-rw-r--r--include/net/inet_connection_sock.h3
-rw-r--r--include/net/inet_hashtables.h68
-rw-r--r--include/net/inet_sock.h5
-rw-r--r--include/net/ipv6.h4
-rw-r--r--include/net/netfilter/nf_tables.h1
-rw-r--r--include/net/netfilter/nf_tables_offload.h2
-rw-r--r--include/net/sock.h14
-rw-r--r--include/trace/events/io_uring.h42
-rw-r--r--include/trace/events/libata.h1
-rw-r--r--include/trace/events/workqueue.h8
-rw-r--r--include/uapi/linux/io_uring.h6
-rw-r--r--include/uapi/linux/tls.h4
-rw-r--r--include/xen/arm/xen-ops.h18
-rw-r--r--include/xen/grant_table.h4
-rw-r--r--include/xen/xen-ops.h13
-rw-r--r--include/xen/xen.h8
-rw-r--r--init/Kconfig9
-rw-r--r--kernel/Makefile2
-rw-r--r--kernel/auditsc.c2
-rw-r--r--kernel/bpf/btf.c8
-rw-r--r--kernel/cfi.c22
-rw-r--r--kernel/dma/debug.c2
-rw-r--r--kernel/dma/swiotlb.c14
-rw-r--r--kernel/entry/kvm.c6
-rw-r--r--kernel/hung_task.c11
-rw-r--r--kernel/irq/chip.c5
-rw-r--r--kernel/locking/lockdep.c2
-rw-r--r--kernel/panic.c4
-rw-r--r--kernel/platform-feature.c27
-rw-r--r--kernel/power/hibernate.c2
-rw-r--r--kernel/printk/printk.c587
-rw-r--r--kernel/rcu/tree_stall.h2
-rw-r--r--kernel/reboot.c101
-rw-r--r--kernel/sched/core.c36
-rw-r--r--kernel/sched/sched.h5
-rw-r--r--kernel/trace/blktrace.c3
-rw-r--r--kernel/trace/bpf_trace.c66
-rw-r--r--kernel/trace/ftrace.c13
-rw-r--r--kernel/trace/rethook.c9
-rw-r--r--kernel/trace/trace.c2
-rw-r--r--kernel/trace/trace_kprobe.c11
-rw-r--r--kernel/trace/trace_uprobe.c1
-rw-r--r--kernel/watchdog.c4
-rw-r--r--kernel/watchdog_hld.c4
-rw-r--r--kernel/workqueue.c16
-rw-r--r--lib/Kconfig3
-rw-r--r--lib/Kconfig.ubsan2
-rw-r--r--lib/Makefile1
-rw-r--r--lib/crc-itu-t.c2
-rw-r--r--lib/crypto/Kconfig1
-rw-r--r--lib/iov_iter.c20
-rw-r--r--lib/memneq.c (renamed from crypto/memneq.c)0
-rw-r--r--lib/vsprintf.c3
-rw-r--r--lib/xarray.c5
-rw-r--r--mm/backing-dev.c11
-rw-r--r--mm/filemap.c24
-rw-r--r--mm/huge_memory.c4
-rw-r--r--mm/migrate.c1
-rw-r--r--mm/readahead.c4
-rw-r--r--mm/slub.c43
-rw-r--r--mm/usercopy.c26
-rw-r--r--mm/vmalloc.c2
-rw-r--r--net/ax25/af_ax25.c33
-rw-r--r--net/core/dev.c25
-rw-r--r--net/core/filter.c34
-rw-r--r--net/core/flow_offload.c6
-rw-r--r--net/core/net-sysfs.c1
-rw-r--r--net/core/skmsg.c5
-rw-r--r--net/dccp/proto.c33
-rw-r--r--net/ethtool/eeprom.c2
-rw-r--r--net/ipv4/inet_connection_sock.c247
-rw-r--r--net/ipv4/inet_hashtables.c203
-rw-r--r--net/ipv4/ip_gre.c26
-rw-r--r--net/ipv4/ping.c10
-rw-r--r--net/ipv4/tcp.c14
-rw-r--r--net/ipv4/tcp_bpf.c3
-rw-r--r--net/ipv4/xfrm4_protocol.c1
-rw-r--r--net/ipv6/ip6_gre.c15
-rw-r--r--net/ipv6/ip6_output.c6
-rw-r--r--net/ipv6/seg6_hmac.c1
-rw-r--r--net/ipv6/seg6_local.c1
-rw-r--r--net/l2tp/l2tp_ip6.c5
-rw-r--r--net/netfilter/nf_dup_netdev.c25
-rw-r--r--net/netfilter/nf_tables_api.c54
-rw-r--r--net/netfilter/nf_tables_offload.c23
-rw-r--r--net/netfilter/nfnetlink_cttimeout.c2
-rw-r--r--net/netfilter/nft_meta.c13
-rw-r--r--net/netfilter/nft_nat.c3
-rw-r--r--net/netfilter/nft_numgen.c12
-rw-r--r--net/openvswitch/actions.c6
-rw-r--r--net/openvswitch/conntrack.c4
-rw-r--r--net/openvswitch/flow.c2
-rw-r--r--net/sched/sch_netem.c4
-rw-r--r--net/sunrpc/clnt.c1
-rw-r--r--net/sunrpc/xdr.c37
-rw-r--r--net/sunrpc/xprtrdma/svc_rdma_rw.c4
-rw-r--r--net/tipc/core.c3
-rw-r--r--net/tls/tls_main.c10
-rw-r--r--net/unix/af_unix.c2
-rw-r--r--net/xdp/xsk.c21
-rw-r--r--net/xdp/xsk_queue.h8
-rw-r--r--samples/fprobe/fprobe_example.c29
-rw-r--r--scripts/Makefile.build4
-rwxr-xr-xscripts/check-local-export36
-rwxr-xr-xscripts/faddr2line45
-rw-r--r--scripts/gdb/linux/config.py6
-rw-r--r--scripts/nsdeps5
-rw-r--r--scripts/sign-file.c7
-rw-r--r--security/keys/trusted-keys/trusted_tpm2.c4
-rw-r--r--security/selinux/hooks.c11
-rw-r--r--sound/core/memalloc.c23
-rw-r--r--sound/hda/hdac_device.c1
-rw-r--r--sound/hda/hdac_i915.c15
-rw-r--r--sound/hda/intel-dsp-config.c12
-rw-r--r--sound/hda/intel-nhlt.c17
-rw-r--r--sound/pci/hda/hda_auto_parser.c7
-rw-r--r--sound/pci/hda/hda_intel.c3
-rw-r--r--sound/pci/hda/hda_local.h1
-rw-r--r--sound/pci/hda/patch_conexant.c11
-rw-r--r--sound/pci/hda/patch_hdmi.c1
-rw-r--r--sound/pci/hda/patch_realtek.c52
-rw-r--r--sound/pci/hda/patch_via.c4
-rw-r--r--sound/soc/codecs/cs35l36.c3
-rw-r--r--sound/soc/codecs/cs42l51.c2
-rw-r--r--sound/soc/codecs/cs42l52.c8
-rw-r--r--sound/soc/codecs/cs42l56.c4
-rw-r--r--sound/soc/codecs/cs53l30.c16
-rw-r--r--sound/soc/codecs/es8328.c5
-rw-r--r--sound/soc/codecs/nau8822.c4
-rw-r--r--sound/soc/codecs/nau8822.h3
-rw-r--r--sound/soc/codecs/wm8962.c1
-rw-r--r--sound/soc/codecs/wm_adsp.c2
-rw-r--r--sound/soc/fsl/fsl_sai.c1
-rw-r--r--sound/soc/intel/boards/sof_cirrus_common.c40
-rw-r--r--sound/soc/qcom/lpass-platform.c2
-rw-r--r--sound/soc/sof/sof-audio.c2
-rw-r--r--sound/soc/sof/sof-client-ipc-msg-injector.c28
-rw-r--r--sound/usb/mixer_us16x08.c6
-rw-r--r--sound/usb/pcm.c5
-rw-r--r--sound/usb/quirks-table.h7
-rw-r--r--sound/x86/intel_hdmi_audio.c15
-rw-r--r--tools/arch/arm64/include/asm/cputype.h12
-rw-r--r--tools/arch/x86/include/asm/cpufeatures.h1
-rw-r--r--tools/arch/x86/include/asm/msr-index.h25
-rw-r--r--tools/arch/x86/include/uapi/asm/kvm.h11
-rw-r--r--tools/include/linux/objtool.h6
-rw-r--r--tools/include/uapi/linux/prctl.h9
-rwxr-xr-xtools/kvm/kvm_stat/kvm_stat3
-rw-r--r--tools/lib/perf/evsel.c17
-rw-r--r--tools/perf/tests/bp_account.c16
-rw-r--r--tools/perf/tests/expr.c2
-rw-r--r--tools/perf/tests/shell/lib/perf_csv_output_lint.py48
-rwxr-xr-xtools/perf/tests/shell/stat+csv_output.sh69
-rwxr-xr-xtools/perf/tests/shell/test_arm_callgraph_fp.sh2
-rw-r--r--tools/perf/tests/topology.c2
-rw-r--r--tools/perf/trace/beauty/include/linux/socket.h7
-rw-r--r--tools/perf/util/arm-spe.c22
-rw-r--r--tools/perf/util/expr.l2
-rw-r--r--tools/perf/util/metricgroup.c9
-rw-r--r--tools/perf/util/unwind-libunwind-local.c2
-rw-r--r--tools/testing/selftests/bpf/prog_tests/bpf_cookie.c78
-rw-r--r--tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c14
-rw-r--r--tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c3
-rw-r--r--tools/testing/selftests/bpf/prog_tests/tailcalls.c55
-rw-r--r--tools/testing/selftests/bpf/progs/freplace_global_func.c18
-rw-r--r--tools/testing/selftests/bpf/progs/kprobe_multi.c24
-rw-r--r--tools/testing/selftests/bpf/progs/tailcall_bpf2bpf6.c42
-rw-r--r--tools/testing/selftests/dma/Makefile1
-rw-r--r--tools/testing/selftests/dma/dma_map_benchmark.c2
-rw-r--r--tools/testing/selftests/kvm/Makefile49
-rw-r--r--tools/testing/selftests/kvm/dirty_log_perf_test.c10
-rw-r--r--tools/testing/selftests/kvm/include/perf_test_util.h9
-rw-r--r--tools/testing/selftests/kvm/include/x86_64/processor.h25
-rw-r--r--tools/testing/selftests/kvm/include/x86_64/vmx.h6
-rw-r--r--tools/testing/selftests/kvm/lib/aarch64/ucall.c9
-rw-r--r--tools/testing/selftests/kvm/lib/perf_test_util.c53
-rw-r--r--tools/testing/selftests/kvm/lib/x86_64/perf_test_util.c112
-rw-r--r--tools/testing/selftests/kvm/lib/x86_64/processor.c31
-rw-r--r--tools/testing/selftests/kvm/lib/x86_64/vmx.c149
-rw-r--r--tools/testing/selftests/kvm/max_guest_memory_test.c2
-rw-r--r--tools/testing/selftests/kvm/x86_64/hyperv_clock.c10
-rw-r--r--tools/testing/selftests/kvm/x86_64/mmu_role_test.c2
-rw-r--r--tools/testing/selftests/lib.mk25
-rw-r--r--tools/testing/selftests/net/.gitignore1
-rw-r--r--tools/testing/selftests/net/Makefile2
-rw-r--r--tools/testing/selftests/net/bind_bhash_test.c119
-rw-r--r--tools/testing/selftests/net/bpf/Makefile4
-rwxr-xr-xtools/testing/selftests/net/fcnal-test.sh61
-rwxr-xr-xtools/testing/selftests/netfilter/nft_concat_range.sh2
-rwxr-xr-xtools/testing/selftests/netfilter/nft_nat.sh43
-rw-r--r--tools/testing/selftests/vm/gup_test.c4
-rw-r--r--tools/testing/selftests/vm/ksm_tests.c2
-rw-r--r--tools/testing/selftests/wireguard/qemu/Makefile28
-rw-r--r--tools/testing/selftests/wireguard/qemu/init.c3
-rw-r--r--tools/testing/selftests/wireguard/qemu/kernel.config3
-rw-r--r--virt/kvm/kvm_main.c13
906 files changed, 10139 insertions, 6671 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata
index 2f726c914752..3daecac48964 100644
--- a/Documentation/ABI/testing/sysfs-ata
+++ b/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
described in ATA8 7.16 and 7.17. Only valid if
the device is not a PM.
- pio_mode: (RO) Transfer modes supported by the device when
- in PIO mode. Mostly used by PATA device.
+ pio_mode: (RO) PIO transfer mode used by the device.
+ Mostly used by PATA devices.
- xfer_mode: (RO) Current transfer mode
+ xfer_mode: (RO) Current transfer mode. Mostly used by
+ PATA devices.
- dma_mode: (RO) Transfer modes supported by the device when
- in DMA mode. Mostly used by PATA device.
+ dma_mode: (RO) DMA transfer mode used by the device.
+ Mostly used by PATA devices.
class: (RO) Device class. Can be "ata" for disk,
"atapi" for packet device, "pmp" for PM, or
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 2ad01cad7f1c..bcc974d276dc 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -526,6 +526,7 @@ What: /sys/devices/system/cpu/vulnerabilities
/sys/devices/system/cpu/vulnerabilities/srbds
/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+ /sys/devices/system/cpu/vulnerabilities/mmio_stale_data
Date: January 2018
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Information about CPU vulnerabilities
diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
index 42214b4ff14a..90596d8bb51c 100644
--- a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
+++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
@@ -26,6 +26,6 @@ Description: Read/write the current state of DDR Backup Mode, which controls
DDR Backup Mode must be explicitly enabled by the user,
to invoke step 1.
- See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
+ See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
Users: User space applications for embedded boards equipped with a
BD9571MWV PMIC.
diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst
index 8cbc711cda93..4df436e7c417 100644
--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -17,3 +17,4 @@ are configurable at compile, boot or run time.
special-register-buffer-data-sampling.rst
core-scheduling.rst
l1d_flush.rst
+ processor_mmio_stale_data.rst
diff --git a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..9393c50b5afc
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,246 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+ =================== ============ =========
+ Common name Family_Model Steppings
+ =================== ============ =========
+ HASWELL_X 06_3FH 2,4
+ SKYLAKE_L 06_4EH 3
+ BROADWELL_X 06_4FH All
+ SKYLAKE_X 06_55H 3,4,6,7,11
+ BROADWELL_D 06_56H 3,4,5
+ SKYLAKE 06_5EH 3
+ ICELAKE_X 06_6AH 4,5,6
+ ICELAKE_D 06_6CH 1
+ ICELAKE_L 06_7EH 5
+ ATOM_TREMONT_D 06_86H All
+ LAKEFIELD 06_8AH 1
+ KABYLAKE_L 06_8EH 9 to 12
+ ATOM_TREMONT 06_96H 1
+ ATOM_TREMONT_L 06_9CH 0
+ KABYLAKE 06_9EH 9 to 13
+ COMETLAKE 06_A5H 2,3,5
+ COMETLAKE_L 06_A6H 0,1
+ ROCKETLAKE 06_A7H 1
+ =================== ============ =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+ Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+ data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+ Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+ Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+ values as part of MD_CLEAR operations. Processors that do not
+ enumerate MDS_NO (meaning they are affected by MDS) but that do
+ enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+ FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+ IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+ bit can be set to cause the VERW instruction to not perform the
+ FB_CLEAR action. Not all processors that support FB_CLEAR will support
+ FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel reuses the MDS function to invoke the buffer clearing:
+
+ mds_clear_cpu_buffers()
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+ ========== =================================================================
+ full If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+ on exit to userspace and when entering a VM. Idle transitions are
+ protected as well. It does not automatically disable SMT.
+ full,nosmt Same as full, with SMT disabled on vulnerable CPUs. This is the
+ complete mitigation.
+ off Disables mitigation completely.
+ ========== =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+ /sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+ .. list-table::
+
+ * - 'Not affected'
+ - The processor is not vulnerable
+ * - 'Vulnerable'
+ - The processor is vulnerable, but no mitigation enabled
+ * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+ - The processor is vulnerable, but microcode is not updated. The
+ mitigation is enabled on a best effort basis.
+ * - 'Mitigation: Clear CPU buffers'
+ - The processor is vulnerable and the CPU buffer clearing mitigation is
+ enabled.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+ ======================== ===========================================
+ 'SMT vulnerable' SMT is enabled
+ 'SMT disabled' SMT is disabled
+ 'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown
+ ======================== ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+ https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 8090130b544b..2522b11e593f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2469,7 +2469,6 @@
protected: nVHE-based mode with support for guests whose
state is kept private from the host.
- Not valid if the kernel is running in EL2.
Defaults to VHE/nVHE based on hardware support. Setting
mode to "protected" will disable kexec and hibernation
@@ -3176,6 +3175,7 @@
srbds=off [X86,INTEL]
no_entry_flush [PPC]
no_uaccess_flush [PPC]
+ mmio_stale_data=off [X86]
Exceptions:
This does not have any effect on
@@ -3197,6 +3197,7 @@
Equivalent to: l1tf=flush,nosmt [X86]
mds=full,nosmt [X86]
tsx_async_abort=full,nosmt [X86]
+ mmio_stale_data=full,nosmt [X86]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -3206,6 +3207,40 @@
log everything. Information is printed at KERN_DEBUG
so loglevel=8 may also need to be specified.
+ mmio_stale_data=
+ [X86,INTEL] Control mitigation for the Processor
+ MMIO Stale Data vulnerabilities.
+
+ Processor MMIO Stale Data is a class of
+ vulnerabilities that may expose data after an MMIO
+ operation. Exposed data could originate or end in
+ the same CPU buffers as affected by MDS and TAA.
+ Therefore, similar to MDS and TAA, the mitigation
+ is to clear the affected CPU buffers.
+
+ This parameter controls the mitigation. The
+ options are:
+
+ full - Enable mitigation on vulnerable CPUs
+
+ full,nosmt - Enable mitigation and disable SMT on
+ vulnerable CPUs.
+
+ off - Unconditionally disable mitigation
+
+ On MDS or TAA affected machines,
+ mmio_stale_data=off can be prevented by an active
+ MDS or TAA mitigation as these vulnerabilities are
+ mitigated with the same mechanism so in order to
+ disable this mitigation, you need to specify
+ mds=off and tsx_async_abort=off too.
+
+ Not specifying this option is equivalent to
+ mmio_stale_data=full.
+
+ For details see:
+ Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
module.sig_enforce
[KNL] When CONFIG_MODULE_SIG is set, this means that
modules without (valid) signatures will fail to load.
diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
index b256f9783883..1dc6c39220f9 100644
--- a/Documentation/arm/tcm.rst
+++ b/Documentation/arm/tcm.rst
@@ -34,7 +34,7 @@ CPU so it is usually wise not to overlap any physical RAM with
the TCM.
The TCM memory can then be remapped to another address again using
-the MMU, but notice that the TCM if often used in situations where
+the MMU, but notice that the TCM is often used in situations where
the MMU is turned off. To avoid confusion the current Linux
implementation will map the TCM 1 to 1 from physical to virtual
memory in the location specified by the kernel. Currently Linux
diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst
index 8ba677b87e90..937147f58cc5 100644
--- a/Documentation/arm64/sme.rst
+++ b/Documentation/arm64/sme.rst
@@ -371,7 +371,7 @@ The regset data starts with struct user_za_header, containing:
Appendix A. SME programmer's model (informative)
=================================================
-This section provides a minimal description of the additions made by SVE to the
+This section provides a minimal description of the additions made by SME to the
ARMv8-A programmer's model that are relevant to this document.
Note: This section is for information only and not intended to be complete or
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index be66f1e8b547..7c331bfbe370 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -45,7 +45,7 @@ description: |
The case where SH and SP are both 1 is likely not very interesting.
maintainers:
- - Luca Ceresoli <luca@lucaceresoli.net>
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index 73470ecd1f12..ce91a9197697 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
Adaptive Voltage Scaling.
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
Node brcm,avs-cpu-data-mem
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
index 795a08ac9f12..2a17ec6fc97c 100644
--- a/Documentation/devicetree/bindings/display/arm,malidp.yaml
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -71,11 +71,6 @@ properties:
- description: number of output lines for the green channel (G)
- description: number of output lines for the blue channel (B)
- arm,malidp-arqos-high-level:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- integer describing the ARQoS levels of DP500's QoS signaling
-
arm,malidp-arqos-value:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -113,7 +108,7 @@ examples:
clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
- arm,malidp-arqos-high-level = <0xd000d000>;
+ arm,malidp-arqos-value = <0xd000d000>;
port {
dp0_output: endpoint {
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
index b41991eaa454..d3c3e4b07897 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU dt properties for SC7180 target
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
description: |
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
index 6e417d06fc79..f427eec3d3a4 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU dt properties for SC7280
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
description: |
Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
index 1a42491efdbc..2bb8896beffc 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU dt properties for SDM845 target
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
description: |
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 7095ec3c890d..880bfe930830 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DSI controller
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
allOf:
- $ref: "../dsi-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 2d5a766d028f..716f921e3532 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DSI 10nm PHY
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
allOf:
- $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 81dbee4803c0..1342d74ecfe0 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DSI 14nm PHY
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
allOf:
- $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
index b8de785ce815..9c1f9140c731 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DSI 20nm PHY
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
allOf:
- $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..3d8540a06fe2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DSI 28nm PHY
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
allOf:
- $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
index 502bdda90235..76d40f7933dd 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Description of Qualcomm Display DSI PHY common dt properties
maintainers:
- - Krishna Manikandan <mkrishn@codeaurora.org>
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
description: |
This defines the DSI PHY dt properties which are common for all
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
index fe0ac08faa1a..0e8ddf0ad789 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
@@ -40,9 +40,8 @@ properties:
value to be used for converting remote channel measurements to
temperature.
$ref: /schemas/types.yaml#/definitions/int32
- items:
- minimum: -128
- maximum: 127
+ minimum: -128
+ maximum: 127
ti,beta-compensation:
description:
diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
index 9c27ed694bbb..4a4df4ffc460 100644
--- a/Documentation/devicetree/bindings/hwmon/vexpress.txt
+++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
"arm,vexpress-power"
"arm,vexpress-energy"
- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
- (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+ (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
for more details)
Optional node properties:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
index f89ebde76dab..de7c5e59bae1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -30,6 +30,7 @@ properties:
- socionext,uniphier-ld11-aidet
- socionext,uniphier-ld20-aidet
- socionext,uniphier-pxs3-aidet
+ - socionext,uniphier-nx1-aidet
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 000000000000..be1539d234f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+ - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+ The Xen IOMMU represents the Xen grant table interface. Grant mappings
+ are to be used with devices connected to the Xen IOMMU using the "iommus"
+ property, which also specifies the ID of the backend domain.
+ The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+ compatible:
+ const: xen,grant-dma
+
+ '#iommu-cells':
+ const: 1
+ description:
+ The single cell is the domid (domain ID) of the domain where the backend
+ is running.
+
+required:
+ - compatible
+ - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ iommu {
+ compatible = "xen,grant-dma";
+ #iommu-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index c7cfa6c2cd81..935d63d181d9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -150,7 +150,6 @@ allOf:
description: 5 memory controller channels and 1 for stream-id registers
reg-names:
- maxItems: 6
items:
- const: sid
- const: broadcast
@@ -170,7 +169,6 @@ allOf:
description: 17 memory controller channels and 1 for stream-id registers
reg-names:
- minItems: 18
items:
- const: sid
- const: broadcast
@@ -202,7 +200,6 @@ allOf:
description: 17 memory controller channels and 1 for stream-id registers
reg-names:
- minItems: 18
items:
- const: sid
- const: broadcast
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
index 74a6867d3c82..edac14af101e 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
maintainers:
- - Luca Ceresoli <luca@lucaceresoli.net>
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
description: |
MAX77714 is a Power Management IC with 4 buck regulators, 9
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index b672202fff4e..5ecdac9de484 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -75,7 +75,6 @@ examples:
sd-uhs-sdr104;
sdhci,auto-cmd12;
interrupts = <0x0 0x26 0x4>;
- interrupt-names = "sdio0_0";
clocks = <&scmi_clk 245>;
clock-names = "sw_sdio";
};
@@ -94,7 +93,6 @@ examples:
non-removable;
bus-width = <0x8>;
interrupts = <0x0 0x27 0x4>;
- interrupt-names = "sdio1_0";
clocks = <&scmi_clk 245>;
clock-names = "sw_sdio";
};
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
index c79639e9027e..3ee758886558 100644
--- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -56,6 +56,9 @@ properties:
- const: core
- const: axi
+ interrupts:
+ maxItems: 1
+
marvell,xenon-sdhc-id:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
@@ -145,7 +148,6 @@ allOf:
items:
- description: Xenon IP registers
- description: Armada 3700 SoC PHY PAD Voltage Control register
- minItems: 2
marvell,pad-type:
$ref: /schemas/types.yaml#/definitions/string
diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
index ddff9233b159..34dd1cc67124 100644
--- a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
+++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
@@ -55,7 +55,6 @@ properties:
maxItems: 1
apple,sart:
- maxItems: 1
$ref: /schemas/types.yaml#/definitions/phandle
description: |
Reference to the SART address filter.
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
index de6a706abcdb..35f03df00130 100644
--- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -9,7 +9,7 @@ Required properties:
- resets : list of phandle and reset specifier pairs. There should be two entries, one
for the whole phy and one for the port
- reset-names : list of reset signal names. Should be "global" and "port"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
See: Documentation/devicetree/bindings/reset/reset.txt
Example:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index 60dc27834e1d..b078009ed509 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm QMP USB3 DP PHY controller
maintainers:
- - Manu Gautam <mgautam@codeaurora.org>
+ - Wesley Cheng <quic_wcheng@quicinc.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 0ab3dad3f121..d68ab49345b8 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm QUSB2 phy controller
maintainers:
- - Manu Gautam <mgautam@codeaurora.org>
+ - Wesley Cheng <quic_wcheng@quicinc.com>
description:
QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 1ce251de0855..7a0e6a9854da 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm Synopsys Femto High-Speed USB PHY V2
maintainers:
- - Wesley Cheng <wcheng@codeaurora.org>
+ - Wesley Cheng <quic_wcheng@quicinc.com>
description: |
Qualcomm High-Speed USB PHY
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
index cbcbd31e3ce8..939cb5b6ffea 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -27,7 +27,7 @@ Required properties:
- pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
First 2 properties must be added in the RK805 PMIC node, documented in
-Documentation/devicetree/bindings/mfd/rk808.txt
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
Optional properties:
-------------------
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
index 4d820df24b89..6f17f3991640 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -32,31 +32,37 @@ patternProperties:
groups:
description: The pin group to select.
enum: [
+ # common
+ i2c, spi, wdt,
+
# For MT7620 SoC
- ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk,
- uartf, uartlite, wdt, wled,
+ ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
+ uartf, uartlite, wled,
# For MT7628 and MT7688 SoCs
- gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+ gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
- pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2,
- wdt, wled_an, wled_kn,
+ pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
+ wled_an, wled_kn,
]
function:
description: The mux function to select.
enum: [
+ # common
+ gpio, i2c, refclk, spi,
+
# For MT7620 SoC
- ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa,
- pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk,
- rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk,
+ ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
+ pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+ rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
wdt rst, wled,
# For MT7628 and MT7688 SoCs
- antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn,
+ antenna, debug, i2s, jtag, p0led_an, p0led_kn,
p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
- refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1,
+ rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
]
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
index 425401c54269..f602a5d6e13a 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -33,32 +33,29 @@ patternProperties:
groups:
description: The pin group to select.
enum: [
+ # common
+ i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite,
+
# For RT3050, RT3052 and RT3350 SoCs
- i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
+ sdram,
# For RT3352 SoC
- i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf,
- uartlite,
-
- # For RT5350 SoC
- i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
+ lna, pa
]
function:
description: The mux function to select.
enum: [
+ # common
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio,
+ pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
+ uartlite, wdg_cs1,
+
# For RT3050, RT3052 and RT3350 SoCs
- gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio,
- pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite,
+ sdram,
# For RT3352 SoC
- gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio,
- pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
- uartlite, wdg_cs1,
-
- # For RT5350 SoC
- gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio,
- pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1,
+ lna, pa
]
required:
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
index 675b9b26d233..f23dcc50793e 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim Integrated MAX77976 Battery charger
maintainers:
- - Luca Ceresoli <luca@lucaceresoli.net>
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
description: |
The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index 12ed98c28aaa..dbe78cd4adba 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: The Qualcomm PMIC VBUS output regulator driver
maintainers:
- - Wesley Cheng <wcheng@codeaurora.org>
+ - Wesley Cheng <quic_wcheng@quicinc.com>
description: |
This regulator driver controls the VBUS output by the Qualcomm PMIC. This
diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt
index d775f72487aa..1c2e92c7831e 100644
--- a/Documentation/devicetree/bindings/regulator/vexpress.txt
+++ b/Documentation/devicetree/bindings/regulator/vexpress.txt
@@ -4,7 +4,7 @@ Versatile Express voltage regulators
Requires node properties:
- "compatible" value: "arm,vexpress-volt"
- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
- (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+ (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
for more details)
Required regulator properties:
diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
index ece261b8e963..7326c0a28d16 100644
--- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
@@ -47,6 +47,5 @@ examples:
clocks = <&clkcfg CLK_SPI0>;
interrupt-parent = <&plic>;
interrupts = <54>;
- spi-max-frequency = <25000000>;
};
...
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
index e2c7b934c50d..78ceb9d67754 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -110,7 +110,6 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
- spi-max-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index bf73de0d5b4a..4aa368447b1e 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -13,7 +13,7 @@ Required properties:
- resets : list of phandle and reset specifier pairs. There should be two entries, one
for the powerdown and softreset lines of the usb3 IP
- reset-names : list of reset signal names. Names should be "powerdown" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
See: Documentation/devicetree/bindings/reset/reset.txt
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt
index 065c91d955ad..d6f2bdee20fc 100644
--- a/Documentation/devicetree/bindings/usb/ehci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- resets : phandle + reset specifier pairs to the powerdown and softreset lines
of the USB IP
- reset-names : should be "power" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
See: Documentation/devicetree/bindings/reset/reset.txt
Example:
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt
index 44c998c16f85..1c735573abc0 100644
--- a/Documentation/devicetree/bindings/usb/ohci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- resets : phandle to the powerdown and reset controller for the USB IP
- reset-names : should be "power" and "softreset".
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
See: Documentation/devicetree/bindings/reset/reset.txt
Example:
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index e336fe2e03cc..749e1963ddbb 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SuperSpeed DWC3 USB SoC controller
maintainers:
- - Manu Gautam <mgautam@codeaurora.org>
+ - Wesley Cheng <quic_wcheng@quicinc.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6bb20b4554d7..0496773a3c4d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -143,6 +143,9 @@ patternProperties:
description: ASPEED Technology Inc.
"^asus,.*":
description: AsusTek Computer Inc.
+ "^atheros,.*":
+ description: Qualcomm Atheros, Inc. (deprecated, use qca)
+ deprecated: true
"^atlas,.*":
description: Atlas Scientific LLC
"^atmel,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index cbcf19f51411..ed6c1ca80dcc 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -64,7 +64,6 @@ if:
then:
properties:
clocks:
- minItems: 2
items:
- description: High-frequency oscillator input, divided internally
- description: Low-frequency oscillator input
diff --git a/Documentation/driver-api/gpio/board.rst b/Documentation/driver-api/gpio/board.rst
index 4e3adf31c8d1..b33aa04f213f 100644
--- a/Documentation/driver-api/gpio/board.rst
+++ b/Documentation/driver-api/gpio/board.rst
@@ -6,7 +6,7 @@ This document explains how GPIOs can be assigned to given devices and functions.
Note that it only applies to the new descriptor-based interface. For a
description of the deprecated integer-based GPIO interface please refer to
-gpio-legacy.txt (actually, there is no real mapping possible with the old
+legacy.rst (actually, there is no real mapping possible with the old
interface; you just fetch an integer from somewhere and request the
corresponding GPIO).
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index 47869ca8ccf0..72bcf5f5e3a2 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -4,7 +4,7 @@ GPIO Descriptor Consumer Interface
This document describes the consumer interface of the GPIO framework. Note that
it describes the new descriptor-based interface. For a description of the
-deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+deprecated integer-based GPIO interface please refer to legacy.rst.
Guidelines for GPIOs consumers
@@ -78,7 +78,7 @@ whether the line is configured active high or active low (see
The two last flags are used for use cases where open drain is mandatory, such
as I2C: if the line is not already configured as open drain in the mappings
-(see board.txt), then open drain will be enforced anyway and a warning will be
+(see board.rst), then open drain will be enforced anyway and a warning will be
printed that the board configuration needs to be updated to match the use case.
Both functions return either a valid GPIO descriptor, or an error code checkable
@@ -270,7 +270,7 @@ driven.
The same is applicable for open drain or open source output lines: those do not
actively drive their output high (open drain) or low (open source), they just
switch their output to a high impedance value. The consumer should not need to
-care. (For details read about open drain in driver.txt.)
+care. (For details read about open drain in driver.rst.)
With this, all the gpiod_set_(array)_value_xxx() functions interpret the
parameter "value" as "asserted" ("1") or "de-asserted" ("0"). The physical line
diff --git a/Documentation/driver-api/gpio/intro.rst b/Documentation/driver-api/gpio/intro.rst
index 2e924fb5b3d5..c9c19243b97f 100644
--- a/Documentation/driver-api/gpio/intro.rst
+++ b/Documentation/driver-api/gpio/intro.rst
@@ -14,12 +14,12 @@ Due to the history of GPIO interfaces in the kernel, there are two different
ways to obtain and use GPIOs:
- The descriptor-based interface is the preferred way to manipulate GPIOs,
- and is described by all the files in this directory excepted gpio-legacy.txt.
+ and is described by all the files in this directory excepted legacy.rst.
- The legacy integer-based interface which is considered deprecated (but still
- usable for compatibility reasons) is documented in gpio-legacy.txt.
+ usable for compatibility reasons) is documented in legacy.rst.
The remainder of this document applies to the new descriptor-based interface.
-gpio-legacy.txt contains the same information applied to the legacy
+legacy.rst contains the same information applied to the legacy
integer-based interface.
diff --git a/Documentation/hte/hte.rst b/Documentation/driver-api/hte/hte.rst
index 153f3233c100..153f3233c100 100644
--- a/Documentation/hte/hte.rst
+++ b/Documentation/driver-api/hte/hte.rst
diff --git a/Documentation/hte/index.rst b/Documentation/driver-api/hte/index.rst
index 9f43301c05dc..9f43301c05dc 100644
--- a/Documentation/hte/index.rst
+++ b/Documentation/driver-api/hte/index.rst
diff --git a/Documentation/hte/tegra194-hte.rst b/Documentation/driver-api/hte/tegra194-hte.rst
index 41983e04d2a0..41983e04d2a0 100644
--- a/Documentation/hte/tegra194-hte.rst
+++ b/Documentation/driver-api/hte/tegra194-hte.rst
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index d76a60d95b58..a6d525cd9fc4 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -108,6 +108,7 @@ available subsections can be seen below.
xilinx/index
xillybus
zorro
+ hte/index
.. only:: subproject and html
diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt
index 10482dee8703..a053667a7a8c 100644
--- a/Documentation/features/core/cBPF-JIT/arch-support.txt
+++ b/Documentation/features/core/cBPF-JIT/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt
index bcefb5afc7d6..c0bb9c92937f 100644
--- a/Documentation/features/core/eBPF-JIT/arch-support.txt
+++ b/Documentation/features/core/eBPF-JIT/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt
index d80d99449ac1..c9bfff292816 100644
--- a/Documentation/features/core/generic-idle-thread/arch-support.txt
+++ b/Documentation/features/core/generic-idle-thread/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | ok |
| ia64: | ok |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt
index 53eab154925d..35e2a44b1448 100644
--- a/Documentation/features/core/jump-labels/arch-support.txt
+++ b/Documentation/features/core/jump-labels/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/core/thread-info-in-task/arch-support.txt b/Documentation/features/core/thread-info-in-task/arch-support.txt
index 94926451afb9..9b3e2ce12b44 100644
--- a/Documentation/features/core/thread-info-in-task/arch-support.txt
+++ b/Documentation/features/core/thread-info-in-task/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt
index b4274b8141b6..9c7ffec5d51d 100644
--- a/Documentation/features/core/tracehook/arch-support.txt
+++ b/Documentation/features/core/tracehook/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | ok |
| ia64: | ok |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt
index c15bb4b21b6f..2fd5fb6f5f23 100644
--- a/Documentation/features/debug/KASAN/arch-support.txt
+++ b/Documentation/features/debug/KASAN/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
index 4c31fc92a312..c45711e55c7b 100644
--- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
+++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
@@ -13,12 +13,13 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
| nios2: | TODO |
| openrisc: | TODO |
- | parisc: | TODO |
+ | parisc: | ok |
| powerpc: | ok |
| riscv: | ok |
| s390: | ok |
diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt
index d7a5ac4bc1fe..502c1d409648 100644
--- a/Documentation/features/debug/gcov-profile-all/arch-support.txt
+++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
@@ -24,7 +25,7 @@
| s390: | ok |
| sh: | ok |
| sparc: | TODO |
- | um: | TODO |
+ | um: | ok |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/kcov/arch-support.txt b/Documentation/features/debug/kcov/arch-support.txt
index 136e14c2b603..afb90bebded2 100644
--- a/Documentation/features/debug/kcov/arch-support.txt
+++ b/Documentation/features/debug/kcov/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt
index 5b3f3d8ae462..04120d278c22 100644
--- a/Documentation/features/debug/kgdb/arch-support.txt
+++ b/Documentation/features/debug/kgdb/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | ok |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
diff --git a/Documentation/features/debug/kmemleak/arch-support.txt b/Documentation/features/debug/kmemleak/arch-support.txt
index 7a2eab4fdf9d..e487c356ab20 100644
--- a/Documentation/features/debug/kmemleak/arch-support.txt
+++ b/Documentation/features/debug/kmemleak/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt
index db02ab194138..b3697f4c806e 100644
--- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt
+++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt
index ec186e7deebc..452385ac9e06 100644
--- a/Documentation/features/debug/kprobes/arch-support.txt
+++ b/Documentation/features/debug/kprobes/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | ok |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt
index 4b7865e693f6..daecf046e72b 100644
--- a/Documentation/features/debug/kretprobes/arch-support.txt
+++ b/Documentation/features/debug/kretprobes/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | ok |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt
index 5d9befa041c7..adb1bd055bfd 100644
--- a/Documentation/features/debug/optprobes/arch-support.txt
+++ b/Documentation/features/debug/optprobes/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt
index d97fd38460e6..ddcd7161d14c 100644
--- a/Documentation/features/debug/stackprotector/arch-support.txt
+++ b/Documentation/features/debug/stackprotector/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt
index d30e3475904e..25121200f9f9 100644
--- a/Documentation/features/debug/uprobes/arch-support.txt
+++ b/Documentation/features/debug/uprobes/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt
index 9ae1fa2eb27c..f2fcff8e77b7 100644
--- a/Documentation/features/debug/user-ret-profiler/arch-support.txt
+++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt
index 9e09988eb654..95e485c87e36 100644
--- a/Documentation/features/io/dma-contiguous/arch-support.txt
+++ b/Documentation/features/io/dma-contiguous/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt
index 5c4ec316dbac..8b1a8d9e1c79 100644
--- a/Documentation/features/locking/cmpxchg-local/arch-support.txt
+++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt
index 65007c1ac44f..ab69e8f56a37 100644
--- a/Documentation/features/locking/lockdep/arch-support.txt
+++ b/Documentation/features/locking/lockdep/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | ok |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt
index 20056670fb09..0bfb72a08d82 100644
--- a/Documentation/features/locking/queued-rwlocks/arch-support.txt
+++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
@@ -20,7 +21,7 @@
| openrisc: | ok |
| parisc: | TODO |
| powerpc: | ok |
- | riscv: | TODO |
+ | riscv: | ok |
| s390: | TODO |
| sh: | TODO |
| sparc: | ok |
diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt
index 707514faac7b..d2f2201febc8 100644
--- a/Documentation/features/locking/queued-spinlocks/arch-support.txt
+++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt
index 9f31ce9b9f2a..0d0647b06762 100644
--- a/Documentation/features/perf/kprobes-event/arch-support.txt
+++ b/Documentation/features/perf/kprobes-event/arch-support.txt
@@ -7,12 +7,13 @@
| arch |status|
-----------------------
| alpha: | TODO |
- | arc: | TODO |
+ | arc: | ok |
| arm: | ok |
| arm64: | ok |
| csky: | ok |
| hexagon: | ok |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt
index f148c4329c7a..13c297bbf05c 100644
--- a/Documentation/features/perf/perf-regs/arch-support.txt
+++ b/Documentation/features/perf/perf-regs/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt
index 32c88b6a910c..931687eec671 100644
--- a/Documentation/features/perf/perf-stackdump/arch-support.txt
+++ b/Documentation/features/perf/perf-stackdump/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
index d82a1f0cdc91..336d728b8a45 100644
--- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt
+++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -36,6 +36,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt
index 2687564e5fa8..76d012118372 100644
--- a/Documentation/features/sched/numa-balancing/arch-support.txt
+++ b/Documentation/features/sched/numa-balancing/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | .. |
| hexagon: | .. |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | .. |
| microblaze: | .. |
| mips: | TODO |
diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
index 1b4109199e9d..a86b8b1f3d10 100644
--- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt
+++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt
index 27327256bd05..364169f00ee2 100644
--- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt
+++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index b9a4bda2c8f5..6ea274790e47 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | ok |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt
index 4aa51c9fa32b..c9e0a16290e6 100644
--- a/Documentation/features/time/context-tracking/arch-support.txt
+++ b/Documentation/features/time/context-tracking/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt
index 0306ece41faa..fd17d8de5ef1 100644
--- a/Documentation/features/time/irq-time-acct/arch-support.txt
+++ b/Documentation/features/time/irq-time-acct/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | .. |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt
index 5d64e40c0092..1a859ac05e9e 100644
--- a/Documentation/features/time/virt-cpuacct/arch-support.txt
+++ b/Documentation/features/time/virt-cpuacct/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | ok |
| hexagon: | TODO |
| ia64: | ok |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt
index 92c9db24a6a3..b1229953391b 100644
--- a/Documentation/features/vm/ELF-ASLR/arch-support.txt
+++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt
index 7424fea37614..02f325fbfcd0 100644
--- a/Documentation/features/vm/PG_uncached/arch-support.txt
+++ b/Documentation/features/vm/PG_uncached/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | ok |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt
index 60985067626b..9bfff977ef55 100644
--- a/Documentation/features/vm/THP/arch-support.txt
+++ b/Documentation/features/vm/THP/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | .. |
| hexagon: | .. |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | .. |
| microblaze: | .. |
| mips: | ok |
diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt
index f2dcbec6020e..039e4e91ada3 100644
--- a/Documentation/features/vm/TLB/arch-support.txt
+++ b/Documentation/features/vm/TLB/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | .. |
| microblaze: | .. |
| mips: | TODO |
diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt
index 680090df03e1..13b4940e0c3a 100644
--- a/Documentation/features/vm/huge-vmap/arch-support.txt
+++ b/Documentation/features/vm/huge-vmap/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | TODO |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | TODO |
diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt
index 205a90e82050..b01bf7bca3e6 100644
--- a/Documentation/features/vm/ioremap_prot/arch-support.txt
+++ b/Documentation/features/vm/ioremap_prot/arch-support.txt
@@ -13,6 +13,7 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt
index 9f16d6e4e11e..fc3687b5e89b 100644
--- a/Documentation/features/vm/pte_special/arch-support.txt
+++ b/Documentation/features/vm/pte_special/arch-support.txt
@@ -13,12 +13,13 @@
| csky: | TODO |
| hexagon: | TODO |
| ia64: | TODO |
+ | loong: | ok |
| m68k: | TODO |
| microblaze: | TODO |
| mips: | ok |
| nios2: | TODO |
| openrisc: | TODO |
- | parisc: | TODO |
+ | parisc: | ok |
| powerpc: | ok |
| riscv: | ok |
| s390: | ok |
diff --git a/Documentation/filesystems/ext4/attributes.rst b/Documentation/filesystems/ext4/attributes.rst
index 871d2da7a0a9..87814696a65b 100644
--- a/Documentation/filesystems/ext4/attributes.rst
+++ b/Documentation/filesystems/ext4/attributes.rst
@@ -13,8 +13,8 @@ disappeared as of Linux 3.0.
There are two places where extended attributes can be found. The first
place is between the end of each inode entry and the beginning of the
-next inode entry. For example, if inode.i\_extra\_isize = 28 and
-sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes
+next inode entry. For example, if inode.i_extra_isize = 28 and
+sb.inode_size = 256, then there are 256 - (128 + 28) = 100 bytes
available for in-inode extended attribute storage. The second place
where extended attributes can be found is in the block pointed to by
``inode.i_file_acl``. As of Linux 3.11, it is not possible for this
@@ -38,8 +38,8 @@ Extended attributes, when stored after the inode, have a header
- Name
- Description
* - 0x0
- - \_\_le32
- - h\_magic
+ - __le32
+ - h_magic
- Magic number for identification, 0xEA020000. This value is set by the
Linux driver, though e2fsprogs doesn't seem to check it(?)
@@ -55,28 +55,28 @@ The beginning of an extended attribute block is in
- Name
- Description
* - 0x0
- - \_\_le32
- - h\_magic
+ - __le32
+ - h_magic
- Magic number for identification, 0xEA020000.
* - 0x4
- - \_\_le32
- - h\_refcount
+ - __le32
+ - h_refcount
- Reference count.
* - 0x8
- - \_\_le32
- - h\_blocks
+ - __le32
+ - h_blocks
- Number of disk blocks used.
* - 0xC
- - \_\_le32
- - h\_hash
+ - __le32
+ - h_hash
- Hash value of all attributes.
* - 0x10
- - \_\_le32
- - h\_checksum
+ - __le32
+ - h_checksum
- Checksum of the extended attribute block.
* - 0x14
- - \_\_u32
- - h\_reserved[3]
+ - __u32
+ - h_reserved[3]
- Zero.
The checksum is calculated against the FS UUID, the 64-bit block number
@@ -100,46 +100,46 @@ Attributes stored inside an inode do not need be stored in sorted order.
- Name
- Description
* - 0x0
- - \_\_u8
- - e\_name\_len
+ - __u8
+ - e_name_len
- Length of name.
* - 0x1
- - \_\_u8
- - e\_name\_index
+ - __u8
+ - e_name_index
- Attribute name index. There is a discussion of this below.
* - 0x2
- - \_\_le16
- - e\_value\_offs
+ - __le16
+ - e_value_offs
- Location of this attribute's value on the disk block where it is stored.
Multiple attributes can share the same value. For an inode attribute
this value is relative to the start of the first entry; for a block this
value is relative to the start of the block (i.e. the header).
* - 0x4
- - \_\_le32
- - e\_value\_inum
+ - __le32
+ - e_value_inum
- The inode where the value is stored. Zero indicates the value is in the
same block as this entry. This field is only used if the
- INCOMPAT\_EA\_INODE feature is enabled.
+ INCOMPAT_EA_INODE feature is enabled.
* - 0x8
- - \_\_le32
- - e\_value\_size
+ - __le32
+ - e_value_size
- Length of attribute value.
* - 0xC
- - \_\_le32
- - e\_hash
+ - __le32
+ - e_hash
- Hash value of attribute name and attribute value. The kernel doesn't
update the hash for in-inode attributes, so for that case this value
must be zero, because e2fsck validates any non-zero hash regardless of
where the xattr lives.
* - 0x10
- char
- - e\_name[e\_name\_len]
+ - e_name[e_name_len]
- Attribute name. Does not include trailing NULL.
Attribute values can follow the end of the entry table. There appears to
be a requirement that they be aligned to 4-byte boundaries. The values
are stored starting at the end of the block and grow towards the
-xattr\_header/xattr\_entry table. When the two collide, the overflow is
+xattr_header/xattr_entry table. When the two collide, the overflow is
put into a separate disk block. If the disk block fills up, the
filesystem returns -ENOSPC.
@@ -167,15 +167,15 @@ the key name. Here is a map of name index values to key prefixes:
* - 1
- “user.”
* - 2
- - “system.posix\_acl\_access”
+ - “system.posix_acl_access”
* - 3
- - “system.posix\_acl\_default”
+ - “system.posix_acl_default”
* - 4
- “trusted.”
* - 6
- “security.”
* - 7
- - “system.” (inline\_data only?)
+ - “system.” (inline_data only?)
* - 8
- “system.richacl” (SuSE kernels only?)
diff --git a/Documentation/filesystems/ext4/bigalloc.rst b/Documentation/filesystems/ext4/bigalloc.rst
index 72075aa608e4..976a180b209c 100644
--- a/Documentation/filesystems/ext4/bigalloc.rst
+++ b/Documentation/filesystems/ext4/bigalloc.rst
@@ -23,7 +23,7 @@ means that a block group addresses 32 gigabytes instead of 128 megabytes,
also shrinking the amount of file system overhead for metadata.
The administrator can set a block cluster size at mkfs time (which is
-stored in the s\_log\_cluster\_size field in the superblock); from then
+stored in the s_log_cluster_size field in the superblock); from then
on, the block bitmaps track clusters, not individual blocks. This means
that block groups can be several gigabytes in size (instead of just
128MiB); however, the minimum allocation unit becomes a cluster, not a
diff --git a/Documentation/filesystems/ext4/bitmaps.rst b/Documentation/filesystems/ext4/bitmaps.rst
index c7546dbc197a..91c45d86e9bb 100644
--- a/Documentation/filesystems/ext4/bitmaps.rst
+++ b/Documentation/filesystems/ext4/bitmaps.rst
@@ -9,15 +9,15 @@ group.
The inode bitmap records which entries in the inode table are in use.
As with most bitmaps, one bit represents the usage status of one data
-block or inode table entry. This implies a block group size of 8 \*
-number\_of\_bytes\_in\_a\_logical\_block.
+block or inode table entry. This implies a block group size of 8 *
+number_of_bytes_in_a_logical_block.
NOTE: If ``BLOCK_UNINIT`` is set for a given block group, various parts
of the kernel and e2fsprogs code pretends that the block bitmap contains
zeros (i.e. all blocks in the group are free). However, it is not
necessarily the case that no blocks are in use -- if ``meta_bg`` is set,
the bitmaps and group descriptor live inside the group. Unfortunately,
-ext2fs\_test\_block\_bitmap2() will return '0' for those locations,
+ext2fs_test_block_bitmap2() will return '0' for those locations,
which produces confusing debugfs output.
Inode Table
diff --git a/Documentation/filesystems/ext4/blockgroup.rst b/Documentation/filesystems/ext4/blockgroup.rst
index d5d652addce5..46d78f860623 100644
--- a/Documentation/filesystems/ext4/blockgroup.rst
+++ b/Documentation/filesystems/ext4/blockgroup.rst
@@ -56,39 +56,39 @@ established that the super block and the group descriptor table, if
present, will be at the beginning of the block group. The bitmaps and
the inode table can be anywhere, and it is quite possible for the
bitmaps to come after the inode table, or for both to be in different
-groups (flex\_bg). Leftover space is used for file data blocks, indirect
+groups (flex_bg). Leftover space is used for file data blocks, indirect
block maps, extent tree blocks, and extended attributes.
Flexible Block Groups
---------------------
Starting in ext4, there is a new feature called flexible block groups
-(flex\_bg). In a flex\_bg, several block groups are tied together as one
+(flex_bg). In a flex_bg, several block groups are tied together as one
logical block group; the bitmap spaces and the inode table space in the
-first block group of the flex\_bg are expanded to include the bitmaps
-and inode tables of all other block groups in the flex\_bg. For example,
-if the flex\_bg size is 4, then group 0 will contain (in order) the
+first block group of the flex_bg are expanded to include the bitmaps
+and inode tables of all other block groups in the flex_bg. For example,
+if the flex_bg size is 4, then group 0 will contain (in order) the
superblock, group descriptors, data block bitmaps for groups 0-3, inode
bitmaps for groups 0-3, inode tables for groups 0-3, and the remaining
space in group 0 is for file data. The effect of this is to group the
block group metadata close together for faster loading, and to enable
large files to be continuous on disk. Backup copies of the superblock
and group descriptors are always at the beginning of block groups, even
-if flex\_bg is enabled. The number of block groups that make up a
-flex\_bg is given by 2 ^ ``sb.s_log_groups_per_flex``.
+if flex_bg is enabled. The number of block groups that make up a
+flex_bg is given by 2 ^ ``sb.s_log_groups_per_flex``.
Meta Block Groups
-----------------
-Without the option META\_BG, for safety concerns, all block group
+Without the option META_BG, for safety concerns, all block group
descriptors copies are kept in the first block group. Given the default
128MiB(2^27 bytes) block group size and 64-byte group descriptors, ext4
can have at most 2^27/64 = 2^21 block groups. This limits the entire
filesystem size to 2^21 * 2^27 = 2^48bytes or 256TiB.
The solution to this problem is to use the metablock group feature
-(META\_BG), which is already in ext3 for all 2.6 releases. With the
-META\_BG feature, ext4 filesystems are partitioned into many metablock
+(META_BG), which is already in ext3 for all 2.6 releases. With the
+META_BG feature, ext4 filesystems are partitioned into many metablock
groups. Each metablock group is a cluster of block groups whose group
descriptor structures can be stored in a single disk block. For ext4
filesystems with 4 KB block size, a single metablock group partition
@@ -110,7 +110,7 @@ bytes, a meta-block group contains 32 block groups for filesystems with
a 1KB block size, and 128 block groups for filesystems with a 4KB
blocksize. Filesystems can either be created using this new block group
descriptor layout, or existing filesystems can be resized on-line, and
-the field s\_first\_meta\_bg in the superblock will indicate the first
+the field s_first_meta_bg in the superblock will indicate the first
block group using this new layout.
Please see an important note about ``BLOCK_UNINIT`` in the section about
@@ -121,15 +121,15 @@ Lazy Block Group Initialization
A new feature for ext4 are three block group descriptor flags that
enable mkfs to skip initializing other parts of the block group
-metadata. Specifically, the INODE\_UNINIT and BLOCK\_UNINIT flags mean
+metadata. Specifically, the INODE_UNINIT and BLOCK_UNINIT flags mean
that the inode and block bitmaps for that group can be calculated and
therefore the on-disk bitmap blocks are not initialized. This is
generally the case for an empty block group or a block group containing
-only fixed-location block group metadata. The INODE\_ZEROED flag means
+only fixed-location block group metadata. The INODE_ZEROED flag means
that the inode table has been initialized; mkfs will unset this flag and
rely on the kernel to initialize the inode tables in the background.
By not writing zeroes to the bitmaps and inode table, mkfs time is
-reduced considerably. Note the feature flag is RO\_COMPAT\_GDT\_CSUM,
-but the dumpe2fs output prints this as “uninit\_bg”. They are the same
+reduced considerably. Note the feature flag is RO_COMPAT_GDT_CSUM,
+but the dumpe2fs output prints this as “uninit_bg”. They are the same
thing.
diff --git a/Documentation/filesystems/ext4/blockmap.rst b/Documentation/filesystems/ext4/blockmap.rst
index 30e25750d88a..2bd990402a5c 100644
--- a/Documentation/filesystems/ext4/blockmap.rst
+++ b/Documentation/filesystems/ext4/blockmap.rst
@@ -1,7 +1,7 @@
.. SPDX-License-Identifier: GPL-2.0
+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
-| i.i\_block Offset | Where It Points |
+| i.i_block Offset | Where It Points |
+=====================+==============================================================================================================================================================================================================================+
| 0 to 11 | Direct map to file blocks 0 to 11. |
+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
diff --git a/Documentation/filesystems/ext4/checksums.rst b/Documentation/filesystems/ext4/checksums.rst
index 5519e253810d..e232749daf5f 100644
--- a/Documentation/filesystems/ext4/checksums.rst
+++ b/Documentation/filesystems/ext4/checksums.rst
@@ -4,7 +4,7 @@ Checksums
---------
Starting in early 2012, metadata checksums were added to all major ext4
-and jbd2 data structures. The associated feature flag is metadata\_csum.
+and jbd2 data structures. The associated feature flag is metadata_csum.
The desired checksum algorithm is indicated in the superblock, though as
of October 2012 the only supported algorithm is crc32c. Some data
structures did not have space to fit a full 32-bit checksum, so only the
@@ -20,7 +20,7 @@ encounters directory blocks that lack sufficient empty space to add a
checksum, it will request that you run ``e2fsck -D`` to have the
directories rebuilt with checksums. This has the added benefit of
removing slack space from the directory files and rebalancing the htree
-indexes. If you \_ignore\_ this step, your directories will not be
+indexes. If you _ignore_ this step, your directories will not be
protected by a checksum!
The following table describes the data elements that go into each type
@@ -35,39 +35,39 @@ of checksum. The checksum function is whatever the superblock describes
- Length
- Ingredients
* - Superblock
- - \_\_le32
+ - __le32
- The entire superblock up to the checksum field. The UUID lives inside
the superblock.
* - MMP
- - \_\_le32
+ - __le32
- UUID + the entire MMP block up to the checksum field.
* - Extended Attributes
- - \_\_le32
+ - __le32
- UUID + the entire extended attribute block. The checksum field is set to
zero.
* - Directory Entries
- - \_\_le32
+ - __le32
- UUID + inode number + inode generation + the directory block up to the
fake entry enclosing the checksum field.
* - HTREE Nodes
- - \_\_le32
+ - __le32
- UUID + inode number + inode generation + all valid extents + HTREE tail.
The checksum field is set to zero.
* - Extents
- - \_\_le32
+ - __le32
- UUID + inode number + inode generation + the entire extent block up to
the checksum field.
* - Bitmaps
- - \_\_le32 or \_\_le16
+ - __le32 or __le16
- UUID + the entire bitmap. Checksums are stored in the group descriptor,
and truncated if the group descriptor size is 32 bytes (i.e. ^64bit)
* - Inodes
- - \_\_le32
+ - __le32
- UUID + inode number + inode generation + the entire inode. The checksum
field is set to zero. Each inode has its own checksum.
* - Group Descriptors
- - \_\_le16
- - If metadata\_csum, then UUID + group number + the entire descriptor;
- else if gdt\_csum, then crc16(UUID + group number + the entire
+ - __le16
+ - If metadata_csum, then UUID + group number + the entire descriptor;
+ else if gdt_csum, then crc16(UUID + group number + the entire
descriptor). In all cases, only the lower 16 bits are stored.
diff --git a/Documentation/filesystems/ext4/directory.rst b/Documentation/filesystems/ext4/directory.rst
index 55f618b37144..6eece8e31df8 100644
--- a/Documentation/filesystems/ext4/directory.rst
+++ b/Documentation/filesystems/ext4/directory.rst
@@ -42,24 +42,24 @@ is at most 263 bytes long, though on disk you'll need to reference
- Name
- Description
* - 0x0
- - \_\_le32
+ - __le32
- inode
- Number of the inode that this directory entry points to.
* - 0x4
- - \_\_le16
- - rec\_len
+ - __le16
+ - rec_len
- Length of this directory entry. Must be a multiple of 4.
* - 0x6
- - \_\_le16
- - name\_len
+ - __le16
+ - name_len
- Length of the file name.
* - 0x8
- char
- - name[EXT4\_NAME\_LEN]
+ - name[EXT4_NAME_LEN]
- File name.
Since file names cannot be longer than 255 bytes, the new directory
-entry format shortens the name\_len field and uses the space for a file
+entry format shortens the name_len field and uses the space for a file
type flag, probably to avoid having to load every inode during directory
tree traversal. This format is ``ext4_dir_entry_2``, which is at most
263 bytes long, though on disk you'll need to reference
@@ -74,24 +74,24 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most
- Name
- Description
* - 0x0
- - \_\_le32
+ - __le32
- inode
- Number of the inode that this directory entry points to.
* - 0x4
- - \_\_le16
- - rec\_len
+ - __le16
+ - rec_len
- Length of this directory entry.
* - 0x6
- - \_\_u8
- - name\_len
+ - __u8
+ - name_len
- Length of the file name.
* - 0x7
- - \_\_u8
- - file\_type
+ - __u8
+ - file_type
- File type code, see ftype_ table below.
* - 0x8
- char
- - name[EXT4\_NAME\_LEN]
+ - name[EXT4_NAME_LEN]
- File name.
.. _ftype:
@@ -137,19 +137,19 @@ entry uses this extension, it may be up to 271 bytes.
- Name
- Description
* - 0x0
- - \_\_le32
+ - __le32
- hash
- The hash of the directory name
* - 0x4
- - \_\_le32
- - minor\_hash
+ - __le32
+ - minor_hash
- The minor hash of the directory name
In order to add checksums to these classic directory blocks, a phony
``struct ext4_dir_entry`` is placed at the end of each leaf block to
hold the checksum. The directory entry is 12 bytes long. The inode
-number and name\_len fields are set to zero to fool old software into
+number and name_len fields are set to zero to fool old software into
ignoring an apparently empty directory entry, and the checksum is stored
in the place where the name normally goes. The structure is
``struct ext4_dir_entry_tail``:
@@ -163,24 +163,24 @@ in the place where the name normally goes. The structure is
- Name
- Description
* - 0x0
- - \_\_le32
- - det\_reserved\_zero1
+ - __le32
+ - det_reserved_zero1
- Inode number, which must be zero.
* - 0x4
- - \_\_le16
- - det\_rec\_len
+ - __le16
+ - det_rec_len
- Length of this directory entry, which must be 12.
* - 0x6
- - \_\_u8
- - det\_reserved\_zero2
+ - __u8
+ - det_reserved_zero2
- Length of the file name, which must be zero.
* - 0x7
- - \_\_u8
- - det\_reserved\_ft
+ - __u8
+ - det_reserved_ft
- File type, which must be 0xDE.
* - 0x8
- - \_\_le32
- - det\_checksum
+ - __le32
+ - det_checksum
- Directory leaf block checksum.
The leaf directory block checksum is calculated against the FS UUID, the
@@ -194,7 +194,7 @@ Hash Tree Directories
A linear array of directory entries isn't great for performance, so a
new feature was added to ext3 to provide a faster (but peculiar)
balanced tree keyed off a hash of the directory entry name. If the
-EXT4\_INDEX\_FL (0x1000) flag is set in the inode, this directory uses a
+EXT4_INDEX_FL (0x1000) flag is set in the inode, this directory uses a
hashed btree (htree) to organize and find directory entries. For
backwards read-only compatibility with ext2, this tree is actually
hidden inside the directory file, masquerading as “empty” directory data
@@ -206,14 +206,14 @@ rest of the directory block is empty so that it moves on.
The root of the tree always lives in the first data block of the
directory. By ext2 custom, the '.' and '..' entries must appear at the
beginning of this first block, so they are put here as two
-``struct ext4_dir_entry_2``\ s and not stored in the tree. The rest of
+``struct ext4_dir_entry_2`` s and not stored in the tree. The rest of
the root node contains metadata about the tree and finally a hash->block
map to find nodes that are lower in the htree. If
``dx_root.info.indirect_levels`` is non-zero then the htree has two
levels; the data block pointed to by the root node's map is an interior
node, which is indexed by a minor hash. Interior nodes in this tree
contains a zeroed out ``struct ext4_dir_entry_2`` followed by a
-minor\_hash->block map to find leafe nodes. Leaf nodes contain a linear
+minor_hash->block map to find leafe nodes. Leaf nodes contain a linear
array of all ``struct ext4_dir_entry_2``; all of these entries
(presumably) hash to the same value. If there is an overflow, the
entries simply overflow into the next leaf node, and the
@@ -245,83 +245,83 @@ of a data block:
- Name
- Description
* - 0x0
- - \_\_le32
+ - __le32
- dot.inode
- inode number of this directory.
* - 0x4
- - \_\_le16
- - dot.rec\_len
+ - __le16
+ - dot.rec_len
- Length of this record, 12.
* - 0x6
- u8
- - dot.name\_len
+ - dot.name_len
- Length of the name, 1.
* - 0x7
- u8
- - dot.file\_type
+ - dot.file_type
- File type of this entry, 0x2 (directory) (if the feature flag is set).
* - 0x8
- char
- dot.name[4]
- - “.\\0\\0\\0”
+ - “.\0\0\0”
* - 0xC
- - \_\_le32
+ - __le32
- dotdot.inode
- inode number of parent directory.
* - 0x10
- - \_\_le16
- - dotdot.rec\_len
- - block\_size - 12. The record length is long enough to cover all htree
+ - __le16
+ - dotdot.rec_len
+ - block_size - 12. The record length is long enough to cover all htree
data.
* - 0x12
- u8
- - dotdot.name\_len
+ - dotdot.name_len
- Length of the name, 2.
* - 0x13
- u8
- - dotdot.file\_type
+ - dotdot.file_type
- File type of this entry, 0x2 (directory) (if the feature flag is set).
* - 0x14
- char
- - dotdot\_name[4]
- - “..\\0\\0”
+ - dotdot_name[4]
+ - “..\0\0”
* - 0x18
- - \_\_le32
- - struct dx\_root\_info.reserved\_zero
+ - __le32
+ - struct dx_root_info.reserved_zero
- Zero.
* - 0x1C
- u8
- - struct dx\_root\_info.hash\_version
+ - struct dx_root_info.hash_version
- Hash type, see dirhash_ table below.
* - 0x1D
- u8
- - struct dx\_root\_info.info\_length
+ - struct dx_root_info.info_length
- Length of the tree information, 0x8.
* - 0x1E
- u8
- - struct dx\_root\_info.indirect\_levels
- - Depth of the htree. Cannot be larger than 3 if the INCOMPAT\_LARGEDIR
+ - struct dx_root_info.indirect_levels
+ - Depth of the htree. Cannot be larger than 3 if the INCOMPAT_LARGEDIR
feature is set; cannot be larger than 2 otherwise.
* - 0x1F
- u8
- - struct dx\_root\_info.unused\_flags
+ - struct dx_root_info.unused_flags
-
* - 0x20
- - \_\_le16
+ - __le16
- limit
- - Maximum number of dx\_entries that can follow this header, plus 1 for
+ - Maximum number of dx_entries that can follow this header, plus 1 for
the header itself.
* - 0x22
- - \_\_le16
+ - __le16
- count
- - Actual number of dx\_entries that follow this header, plus 1 for the
+ - Actual number of dx_entries that follow this header, plus 1 for the
header itself.
* - 0x24
- - \_\_le32
+ - __le32
- block
- The block number (within the directory file) that goes with hash=0.
* - 0x28
- - struct dx\_entry
+ - struct dx_entry
- entries[0]
- As many 8-byte ``struct dx_entry`` as fits in the rest of the data block.
@@ -362,38 +362,38 @@ also the full length of a data block:
- Name
- Description
* - 0x0
- - \_\_le32
+ - __le32
- fake.inode
- Zero, to make it look like this entry is not in use.
* - 0x4
- - \_\_le16
- - fake.rec\_len
- - The size of the block, in order to hide all of the dx\_node data.
+ - __le16
+ - fake.rec_len
+ - The size of the block, in order to hide all of the dx_node data.
* - 0x6
- u8
- - name\_len
+ - name_len
- Zero. There is no name for this “unused” directory entry.
* - 0x7
- u8
- - file\_type
+ - file_type
- Zero. There is no file type for this “unused” directory entry.
* - 0x8
- - \_\_le16
+ - __le16
- limit
- - Maximum number of dx\_entries that can follow this header, plus 1 for
+ - Maximum number of dx_entries that can follow this header, plus 1 for
the header itself.
* - 0xA
- - \_\_le16
+ - __le16
- count
- - Actual number of dx\_entries that follow this header, plus 1 for the
+ - Actual number of dx_entries that follow this header, plus 1 for the
header itself.
* - 0xE
- - \_\_le32
+ - __le32
- block
- The block number (within the directory file) that goes with the lowest
hash value of this block. This value is stored in the parent block.
* - 0x12
- - struct dx\_entry
+ - struct dx_entry
- entries[0]
- As many 8-byte ``struct dx_entry`` as fits in the rest of the data block.
@@ -410,11 +410,11 @@ long:
- Name
- Description
* - 0x0
- - \_\_le32
+ - __le32
- hash
- Hash code.
* - 0x4
- - \_\_le32
+ - __le32
- block
- Block number (within the directory file, not filesystem blocks) of the
next node in the htree.
@@ -423,13 +423,13 @@ long:
author.)
If metadata checksums are enabled, the last 8 bytes of the directory
-block (precisely the length of one dx\_entry) are used to store a
+block (precisely the length of one dx_entry) are used to store a
``struct dx_tail``, which contains the checksum. The ``limit`` and
-``count`` entries in the dx\_root/dx\_node structures are adjusted as
-necessary to fit the dx\_tail into the block. If there is no space for
-the dx\_tail, the user is notified to run e2fsck -D to rebuild the
+``count`` entries in the dx_root/dx_node structures are adjusted as
+necessary to fit the dx_tail into the block. If there is no space for
+the dx_tail, the user is notified to run e2fsck -D to rebuild the
directory index (which will ensure that there's space for the checksum.
-The dx\_tail structure is 8 bytes long and looks like this:
+The dx_tail structure is 8 bytes long and looks like this:
.. list-table::
:widths: 8 8 24 40
@@ -441,13 +441,13 @@ The dx\_tail structure is 8 bytes long and looks like this:
- Description
* - 0x0
- u32
- - dt\_reserved
+ - dt_reserved
- Zero.
* - 0x4
- - \_\_le32
- - dt\_checksum
+ - __le32
+ - dt_checksum
- Checksum of the htree directory block.
The checksum is calculated against the FS UUID, the htree index header
-(dx\_root or dx\_node), all of the htree indices (dx\_entry) that are in
-use, and the tail block (dx\_tail).
+(dx_root or dx_node), all of the htree indices (dx_entry) that are in
+use, and the tail block (dx_tail).
diff --git a/Documentation/filesystems/ext4/eainode.rst b/Documentation/filesystems/ext4/eainode.rst
index ecc0d01a0a72..7a2ef26b064a 100644
--- a/Documentation/filesystems/ext4/eainode.rst
+++ b/Documentation/filesystems/ext4/eainode.rst
@@ -5,14 +5,14 @@ Large Extended Attribute Values
To enable ext4 to store extended attribute values that do not fit in the
inode or in the single extended attribute block attached to an inode,
-the EA\_INODE feature allows us to store the value in the data blocks of
+the EA_INODE feature allows us to store the value in the data blocks of
a regular file inode. This “EA inode” is linked only from the extended
attribute name index and must not appear in a directory entry. The
-inode's i\_atime field is used to store a checksum of the xattr value;
-and i\_ctime/i\_version store a 64-bit reference count, which enables
+inode's i_atime field is used to store a checksum of the xattr value;
+and i_ctime/i_version store a 64-bit reference count, which enables
sharing of large xattr values between multiple owning inodes. For
backward compatibility with older versions of this feature, the
-i\_mtime/i\_generation *may* store a back-reference to the inode number
-and i\_generation of the **one** owning inode (in cases where the EA
+i_mtime/i_generation *may* store a back-reference to the inode number
+and i_generation of the **one** owning inode (in cases where the EA
inode is not referenced by multiple inodes) to verify that the EA inode
is the correct one being accessed.
diff --git a/Documentation/filesystems/ext4/group_descr.rst b/Documentation/filesystems/ext4/group_descr.rst
index 7ba6114e7f5c..392ec44f8fb0 100644
--- a/Documentation/filesystems/ext4/group_descr.rst
+++ b/Documentation/filesystems/ext4/group_descr.rst
@@ -7,34 +7,34 @@ Each block group on the filesystem has one of these descriptors
associated with it. As noted in the Layout section above, the group
descriptors (if present) are the second item in the block group. The
standard configuration is for each block group to contain a full copy of
-the block group descriptor table unless the sparse\_super feature flag
+the block group descriptor table unless the sparse_super feature flag
is set.
Notice how the group descriptor records the location of both bitmaps and
the inode table (i.e. they can float). This means that within a block
group, the only data structures with fixed locations are the superblock
-and the group descriptor table. The flex\_bg mechanism uses this
+and the group descriptor table. The flex_bg mechanism uses this
property to group several block groups into a flex group and lay out all
of the groups' bitmaps and inode tables into one long run in the first
group of the flex group.
-If the meta\_bg feature flag is set, then several block groups are
-grouped together into a meta group. Note that in the meta\_bg case,
+If the meta_bg feature flag is set, then several block groups are
+grouped together into a meta group. Note that in the meta_bg case,
however, the first and last two block groups within the larger meta
group contain only group descriptors for the groups inside the meta
group.
-flex\_bg and meta\_bg do not appear to be mutually exclusive features.
+flex_bg and meta_bg do not appear to be mutually exclusive features.
In ext2, ext3, and ext4 (when the 64bit feature is not enabled), the
block group descriptor was only 32 bytes long and therefore ends at
-bg\_checksum. On an ext4 filesystem with the 64bit feature enabled, the
+bg_checksum. On an ext4 filesystem with the 64bit feature enabled, the
block group descriptor expands to at least the 64 bytes described below;
the size is stored in the superblock.
-If gdt\_csum is set and metadata\_csum is not set, the block group
+If gdt_csum is set and metadata_csum is not set, the block group
checksum is the crc16 of the FS UUID, the group number, and the group
-descriptor structure. If metadata\_csum is set, then the block group
+descriptor structure. If metadata_csum is set, then the block group
checksum is the lower 16 bits of the checksum of the FS UUID, the group
number, and the group descriptor structure. Both block and inode bitmap
checksums are calculated against the FS UUID, the group number, and the
@@ -51,59 +51,59 @@ The block group descriptor is laid out in ``struct ext4_group_desc``.
- Name
- Description
* - 0x0
- - \_\_le32
- - bg\_block\_bitmap\_lo
+ - __le32
+ - bg_block_bitmap_lo
- Lower 32-bits of location of block bitmap.
* - 0x4
- - \_\_le32
- - bg\_inode\_bitmap\_lo
+ - __le32
+ - bg_inode_bitmap_lo
- Lower 32-bits of location of inode bitmap.
* - 0x8
- - \_\_le32
- - bg\_inode\_table\_lo
+ - __le32
+ - bg_inode_table_lo
- Lower 32-bits of location of inode table.
* - 0xC
- - \_\_le16
- - bg\_free\_blocks\_count\_lo
+ - __le16
+ - bg_free_blocks_count_lo
- Lower 16-bits of free block count.
* - 0xE
- - \_\_le16
- - bg\_free\_inodes\_count\_lo
+ - __le16
+ - bg_free_inodes_count_lo
- Lower 16-bits of free inode count.
* - 0x10
- - \_\_le16
- - bg\_used\_dirs\_count\_lo
+ - __le16
+ - bg_used_dirs_count_lo
- Lower 16-bits of directory count.
* - 0x12
- - \_\_le16
- - bg\_flags
+ - __le16
+ - bg_flags
- Block group flags. See the bgflags_ table below.
* - 0x14
- - \_\_le32
- - bg\_exclude\_bitmap\_lo
+ - __le32
+ - bg_exclude_bitmap_lo
- Lower 32-bits of location of snapshot exclusion bitmap.
* - 0x18
- - \_\_le16
- - bg\_block\_bitmap\_csum\_lo
+ - __le16
+ - bg_block_bitmap_csum_lo
- Lower 16-bits of the block bitmap checksum.
* - 0x1A
- - \_\_le16
- - bg\_inode\_bitmap\_csum\_lo
+ - __le16
+ - bg_inode_bitmap_csum_lo
- Lower 16-bits of the inode bitmap checksum.
* - 0x1C
- - \_\_le16
- - bg\_itable\_unused\_lo
+ - __le16
+ - bg_itable_unused_lo
- Lower 16-bits of unused inode count. If set, we needn't scan past the
- ``(sb.s_inodes_per_group - gdt.bg_itable_unused)``\ th entry in the
+ ``(sb.s_inodes_per_group - gdt.bg_itable_unused)`` th entry in the
inode table for this group.
* - 0x1E
- - \_\_le16
- - bg\_checksum
- - Group descriptor checksum; crc16(sb\_uuid+group\_num+bg\_desc) if the
- RO\_COMPAT\_GDT\_CSUM feature is set, or
- crc32c(sb\_uuid+group\_num+bg\_desc) & 0xFFFF if the
- RO\_COMPAT\_METADATA\_CSUM feature is set. The bg\_checksum
- field in bg\_desc is skipped when calculating crc16 checksum,
+ - __le16
+ - bg_checksum
+ - Group descriptor checksum; crc16(sb_uuid+group_num+bg_desc) if the
+ RO_COMPAT_GDT_CSUM feature is set, or
+ crc32c(sb_uuid+group_num+bg_desc) & 0xFFFF if the
+ RO_COMPAT_METADATA_CSUM feature is set. The bg_checksum
+ field in bg_desc is skipped when calculating crc16 checksum,
and set to zero if crc32c checksum is used.
* -
-
@@ -111,48 +111,48 @@ The block group descriptor is laid out in ``struct ext4_group_desc``.
- These fields only exist if the 64bit feature is enabled and s_desc_size
> 32.
* - 0x20
- - \_\_le32
- - bg\_block\_bitmap\_hi
+ - __le32
+ - bg_block_bitmap_hi
- Upper 32-bits of location of block bitmap.
* - 0x24
- - \_\_le32
- - bg\_inode\_bitmap\_hi
+ - __le32
+ - bg_inode_bitmap_hi
- Upper 32-bits of location of inodes bitmap.
* - 0x28
- - \_\_le32
- - bg\_inode\_table\_hi
+ - __le32
+ - bg_inode_table_hi
- Upper 32-bits of location of inodes table.
* - 0x2C
- - \_\_le16
- - bg\_free\_blocks\_count\_hi
+ - __le16
+ - bg_free_blocks_count_hi
- Upper 16-bits of free block count.
* - 0x2E
- - \_\_le16
- - bg\_free\_inodes\_count\_hi
+ - __le16
+ - bg_free_inodes_count_hi
- Upper 16-bits of free inode count.
* - 0x30
- - \_\_le16
- - bg\_used\_dirs\_count\_hi
+ - __le16
+ - bg_used_dirs_count_hi
- Upper 16-bits of directory count.
* - 0x32
- - \_\_le16
- - bg\_itable\_unused\_hi
+ - __le16
+ - bg_itable_unused_hi
- Upper 16-bits of unused inode count.
* - 0x34
- - \_\_le32
- - bg\_exclude\_bitmap\_hi
+ - __le32
+ - bg_exclude_bitmap_hi
- Upper 32-bits of location of snapshot exclusion bitmap.
* - 0x38
- - \_\_le16
- - bg\_block\_bitmap\_csum\_hi
+ - __le16
+ - bg_block_bitmap_csum_hi
- Upper 16-bits of the block bitmap checksum.
* - 0x3A
- - \_\_le16
- - bg\_inode\_bitmap\_csum\_hi
+ - __le16
+ - bg_inode_bitmap_csum_hi
- Upper 16-bits of the inode bitmap checksum.
* - 0x3C
- - \_\_u32
- - bg\_reserved
+ - __u32
+ - bg_reserved
- Padding to 64 bytes.
.. _bgflags:
@@ -166,8 +166,8 @@ Block group flags can be any combination of the following:
* - Value
- Description
* - 0x1
- - inode table and bitmap are not initialized (EXT4\_BG\_INODE\_UNINIT).
+ - inode table and bitmap are not initialized (EXT4_BG_INODE_UNINIT).
* - 0x2
- - block bitmap is not initialized (EXT4\_BG\_BLOCK\_UNINIT).
+ - block bitmap is not initialized (EXT4_BG_BLOCK_UNINIT).
* - 0x4
- - inode table is zeroed (EXT4\_BG\_INODE\_ZEROED).
+ - inode table is zeroed (EXT4_BG_INODE_ZEROED).
diff --git a/Documentation/filesystems/ext4/ifork.rst b/Documentation/filesystems/ext4/ifork.rst
index b9816d5a896b..dc31f505e6c8 100644
--- a/Documentation/filesystems/ext4/ifork.rst
+++ b/Documentation/filesystems/ext4/ifork.rst
@@ -1,6 +1,6 @@
.. SPDX-License-Identifier: GPL-2.0
-The Contents of inode.i\_block
+The Contents of inode.i_block
------------------------------
Depending on the type of file an inode describes, the 60 bytes of
@@ -47,7 +47,7 @@ In ext4, the file to logical block map has been replaced with an extent
tree. Under the old scheme, allocating a contiguous run of 1,000 blocks
requires an indirect block to map all 1,000 entries; with extents, the
mapping is reduced to a single ``struct ext4_extent`` with
-``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate
+``ee_len = 1000``. If flex_bg is enabled, it is possible to allocate
very large files with a single extent, at a considerable reduction in
metadata block use, and some improvement in disk efficiency. The inode
must have the extents flag (0x80000) flag set for this feature to be in
@@ -76,28 +76,28 @@ which is 12 bytes long:
- Name
- Description
* - 0x0
- - \_\_le16
- - eh\_magic
+ - __le16
+ - eh_magic
- Magic number, 0xF30A.
* - 0x2
- - \_\_le16
- - eh\_entries
+ - __le16
+ - eh_entries
- Number of valid entries following the header.
* - 0x4
- - \_\_le16
- - eh\_max
+ - __le16
+ - eh_max
- Maximum number of entries that could follow the header.
* - 0x6
- - \_\_le16
- - eh\_depth
+ - __le16
+ - eh_depth
- Depth of this extent node in the extent tree. 0 = this extent node
points to data blocks; otherwise, this extent node points to other
extent nodes. The extent tree can be at most 5 levels deep: a logical
block number can be at most ``2^32``, and the smallest ``n`` that
satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5.
* - 0x8
- - \_\_le32
- - eh\_generation
+ - __le32
+ - eh_generation
- Generation of the tree. (Used by Lustre, but not standard ext4).
Internal nodes of the extent tree, also known as index nodes, are
@@ -112,22 +112,22 @@ recorded as ``struct ext4_extent_idx``, and are 12 bytes long:
- Name
- Description
* - 0x0
- - \_\_le32
- - ei\_block
+ - __le32
+ - ei_block
- This index node covers file blocks from 'block' onward.
* - 0x4
- - \_\_le32
- - ei\_leaf\_lo
+ - __le32
+ - ei_leaf_lo
- Lower 32-bits of the block number of the extent node that is the next
level lower in the tree. The tree node pointed to can be either another
internal node or a leaf node, described below.
* - 0x8
- - \_\_le16
- - ei\_leaf\_hi
+ - __le16
+ - ei_leaf_hi
- Upper 16-bits of the previous field.
* - 0xA
- - \_\_u16
- - ei\_unused
+ - __u16
+ - ei_unused
-
Leaf nodes of the extent tree are recorded as ``struct ext4_extent``,
@@ -142,24 +142,24 @@ and are also 12 bytes long:
- Name
- Description
* - 0x0
- - \_\_le32
- - ee\_block
+ - __le32
+ - ee_block
- First file block number that this extent covers.
* - 0x4
- - \_\_le16
- - ee\_len
+ - __le16
+ - ee_len
- Number of blocks covered by extent. If the value of this field is <=
32768, the extent is initialized. If the value of the field is > 32768,
the extent is uninitialized and the actual extent length is ``ee_len`` -
32768. Therefore, the maximum length of a initialized extent is 32768
blocks, and the maximum length of an uninitialized extent is 32767.
* - 0x6
- - \_\_le16
- - ee\_start\_hi
+ - __le16
+ - ee_start_hi
- Upper 16-bits of the block number to which this extent points.
* - 0x8
- - \_\_le32
- - ee\_start\_lo
+ - __le32
+ - ee_start_lo
- Lower 32-bits of the block number to which this extent points.
Prior to the introduction of metadata checksums, the extent header +
@@ -182,8 +182,8 @@ including) the checksum itself.
- Name
- Description
* - 0x0
- - \_\_le32
- - eb\_checksum
+ - __le32
+ - eb_checksum
- Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock)
Inline Data
diff --git a/Documentation/filesystems/ext4/inlinedata.rst b/Documentation/filesystems/ext4/inlinedata.rst
index d1075178ce0b..a728af0d2fd0 100644
--- a/Documentation/filesystems/ext4/inlinedata.rst
+++ b/Documentation/filesystems/ext4/inlinedata.rst
@@ -11,12 +11,12 @@ file is smaller than 60 bytes, then the data are stored inline in
attribute space, then it might be found as an extended attribute
“system.data” within the inode body (“ibody EA”). This of course
constrains the amount of extended attributes one can attach to an inode.
-If the data size increases beyond i\_block + ibody EA, a regular block
+If the data size increases beyond i_block + ibody EA, a regular block
is allocated and the contents moved to that block.
Pending a change to compact the extended attribute key used to store
inline data, one ought to be able to store 160 bytes of data in a
-256-byte inode (as of June 2015, when i\_extra\_isize is 28). Prior to
+256-byte inode (as of June 2015, when i_extra_isize is 28). Prior to
that, the limit was 156 bytes due to inefficient use of inode space.
The inline data feature requires the presence of an extended attribute
@@ -25,12 +25,12 @@ for “system.data”, even if the attribute value is zero length.
Inline Directories
~~~~~~~~~~~~~~~~~~
-The first four bytes of i\_block are the inode number of the parent
+The first four bytes of i_block are the inode number of the parent
directory. Following that is a 56-byte space for an array of directory
entries; see ``struct ext4_dir_entry``. If there is a “system.data”
attribute in the inode body, the EA value is an array of
``struct ext4_dir_entry`` as well. Note that for inline directories, the
-i\_block and EA space are treated as separate dirent blocks; directory
+i_block and EA space are treated as separate dirent blocks; directory
entries cannot span the two.
Inline directory entries are not checksummed, as the inode checksum
diff --git a/Documentation/filesystems/ext4/inodes.rst b/Documentation/filesystems/ext4/inodes.rst
index 6c5ce666e63f..cfc6c1659931 100644
--- a/Documentation/filesystems/ext4/inodes.rst
+++ b/Documentation/filesystems/ext4/inodes.rst
@@ -38,138 +38,138 @@ The inode table entry is laid out in ``struct ext4_inode``.
- Name
- Description
* - 0x0
- - \_\_le16
- - i\_mode
+ - __le16
+ - i_mode
- File mode. See the table i_mode_ below.
* - 0x2
- - \_\_le16
- - i\_uid
+ - __le16
+ - i_uid
- Lower 16-bits of Owner UID.
* - 0x4
- - \_\_le32
- - i\_size\_lo
+ - __le32
+ - i_size_lo
- Lower 32-bits of size in bytes.
* - 0x8
- - \_\_le32
- - i\_atime
- - Last access time, in seconds since the epoch. However, if the EA\_INODE
+ - __le32
+ - i_atime
+ - Last access time, in seconds since the epoch. However, if the EA_INODE
inode flag is set, this inode stores an extended attribute value and
this field contains the checksum of the value.
* - 0xC
- - \_\_le32
- - i\_ctime
+ - __le32
+ - i_ctime
- Last inode change time, in seconds since the epoch. However, if the
- EA\_INODE inode flag is set, this inode stores an extended attribute
+ EA_INODE inode flag is set, this inode stores an extended attribute
value and this field contains the lower 32 bits of the attribute value's
reference count.
* - 0x10
- - \_\_le32
- - i\_mtime
+ - __le32
+ - i_mtime
- Last data modification time, in seconds since the epoch. However, if the
- EA\_INODE inode flag is set, this inode stores an extended attribute
+ EA_INODE inode flag is set, this inode stores an extended attribute
value and this field contains the number of the inode that owns the
extended attribute.
* - 0x14
- - \_\_le32
- - i\_dtime
+ - __le32
+ - i_dtime
- Deletion Time, in seconds since the epoch.
* - 0x18
- - \_\_le16
- - i\_gid
+ - __le16
+ - i_gid
- Lower 16-bits of GID.
* - 0x1A
- - \_\_le16
- - i\_links\_count
+ - __le16
+ - i_links_count
- Hard link count. Normally, ext4 does not permit an inode to have more
than 65,000 hard links. This applies to files as well as directories,
which means that there cannot be more than 64,998 subdirectories in a
directory (each subdirectory's '..' entry counts as a hard link, as does
- the '.' entry in the directory itself). With the DIR\_NLINK feature
+ the '.' entry in the directory itself). With the DIR_NLINK feature
enabled, ext4 supports more than 64,998 subdirectories by setting this
field to 1 to indicate that the number of hard links is not known.
* - 0x1C
- - \_\_le32
- - i\_blocks\_lo
- - Lower 32-bits of “block” count. If the huge\_file feature flag is not
+ - __le32
+ - i_blocks_lo
+ - Lower 32-bits of “block” count. If the huge_file feature flag is not
set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks
- on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in
+ on disk. If huge_file is set and EXT4_HUGE_FILE_FL is NOT set in
``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi
- << 32)`` 512-byte blocks on disk. If huge\_file is set and
- EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file
+ << 32)`` 512-byte blocks on disk. If huge_file is set and
+ EXT4_HUGE_FILE_FL IS set in ``inode.i_flags``, then this file
consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on
disk.
* - 0x20
- - \_\_le32
- - i\_flags
+ - __le32
+ - i_flags
- Inode flags. See the table i_flags_ below.
* - 0x24
- 4 bytes
- - i\_osd1
+ - i_osd1
- See the table i_osd1_ for more details.
* - 0x28
- 60 bytes
- - i\_block[EXT4\_N\_BLOCKS=15]
- - Block map or extent tree. See the section “The Contents of inode.i\_block”.
+ - i_block[EXT4_N_BLOCKS=15]
+ - Block map or extent tree. See the section “The Contents of inode.i_block”.
* - 0x64
- - \_\_le32
- - i\_generation
+ - __le32
+ - i_generation
- File version (for NFS).
* - 0x68
- - \_\_le32
- - i\_file\_acl\_lo
+ - __le32
+ - i_file_acl_lo
- Lower 32-bits of extended attribute block. ACLs are of course one of
many possible extended attributes; I think the name of this field is a
result of the first use of extended attributes being for ACLs.
* - 0x6C
- - \_\_le32
- - i\_size\_high / i\_dir\_acl
+ - __le32
+ - i_size_high / i_dir_acl
- Upper 32-bits of file/directory size. In ext2/3 this field was named
- i\_dir\_acl, though it was usually set to zero and never used.
+ i_dir_acl, though it was usually set to zero and never used.
* - 0x70
- - \_\_le32
- - i\_obso\_faddr
+ - __le32
+ - i_obso_faddr
- (Obsolete) fragment address.
* - 0x74
- 12 bytes
- - i\_osd2
+ - i_osd2
- See the table i_osd2_ for more details.
* - 0x80
- - \_\_le16
- - i\_extra\_isize
+ - __le16
+ - i_extra_isize
- Size of this inode - 128. Alternately, the size of the extended inode
fields beyond the original ext2 inode, including this field.
* - 0x82
- - \_\_le16
- - i\_checksum\_hi
+ - __le16
+ - i_checksum_hi
- Upper 16-bits of the inode checksum.
* - 0x84
- - \_\_le32
- - i\_ctime\_extra
+ - __le32
+ - i_ctime_extra
- Extra change time bits. This provides sub-second precision. See Inode
Timestamps section.
* - 0x88
- - \_\_le32
- - i\_mtime\_extra
+ - __le32
+ - i_mtime_extra
- Extra modification time bits. This provides sub-second precision.
* - 0x8C
- - \_\_le32
- - i\_atime\_extra
+ - __le32
+ - i_atime_extra
- Extra access time bits. This provides sub-second precision.
* - 0x90
- - \_\_le32
- - i\_crtime
+ - __le32
+ - i_crtime
- File creation time, in seconds since the epoch.
* - 0x94
- - \_\_le32
- - i\_crtime\_extra
+ - __le32
+ - i_crtime_extra
- Extra file creation time bits. This provides sub-second precision.
* - 0x98
- - \_\_le32
- - i\_version\_hi
+ - __le32
+ - i_version_hi
- Upper 32-bits for version number.
* - 0x9C
- - \_\_le32
- - i\_projid
+ - __le32
+ - i_projid
- Project ID.
.. _i_mode:
@@ -183,45 +183,45 @@ The ``i_mode`` value is a combination of the following flags:
* - Value
- Description
* - 0x1
- - S\_IXOTH (Others may execute)
+ - S_IXOTH (Others may execute)
* - 0x2
- - S\_IWOTH (Others may write)
+ - S_IWOTH (Others may write)
* - 0x4
- - S\_IROTH (Others may read)
+ - S_IROTH (Others may read)
* - 0x8
- - S\_IXGRP (Group members may execute)
+ - S_IXGRP (Group members may execute)
* - 0x10
- - S\_IWGRP (Group members may write)
+ - S_IWGRP (Group members may write)
* - 0x20
- - S\_IRGRP (Group members may read)
+ - S_IRGRP (Group members may read)
* - 0x40
- - S\_IXUSR (Owner may execute)
+ - S_IXUSR (Owner may execute)
* - 0x80
- - S\_IWUSR (Owner may write)
+ - S_IWUSR (Owner may write)
* - 0x100
- - S\_IRUSR (Owner may read)
+ - S_IRUSR (Owner may read)
* - 0x200
- - S\_ISVTX (Sticky bit)
+ - S_ISVTX (Sticky bit)
* - 0x400
- - S\_ISGID (Set GID)
+ - S_ISGID (Set GID)
* - 0x800
- - S\_ISUID (Set UID)
+ - S_ISUID (Set UID)
* -
- These are mutually-exclusive file types:
* - 0x1000
- - S\_IFIFO (FIFO)
+ - S_IFIFO (FIFO)
* - 0x2000
- - S\_IFCHR (Character device)
+ - S_IFCHR (Character device)
* - 0x4000
- - S\_IFDIR (Directory)
+ - S_IFDIR (Directory)
* - 0x6000
- - S\_IFBLK (Block device)
+ - S_IFBLK (Block device)
* - 0x8000
- - S\_IFREG (Regular file)
+ - S_IFREG (Regular file)
* - 0xA000
- - S\_IFLNK (Symbolic link)
+ - S_IFLNK (Symbolic link)
* - 0xC000
- - S\_IFSOCK (Socket)
+ - S_IFSOCK (Socket)
.. _i_flags:
@@ -234,56 +234,56 @@ The ``i_flags`` field is a combination of these values:
* - Value
- Description
* - 0x1
- - This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented)
+ - This file requires secure deletion (EXT4_SECRM_FL). (not implemented)
* - 0x2
- This file should be preserved, should undeletion be desired
- (EXT4\_UNRM\_FL). (not implemented)
+ (EXT4_UNRM_FL). (not implemented)
* - 0x4
- - File is compressed (EXT4\_COMPR\_FL). (not really implemented)
+ - File is compressed (EXT4_COMPR_FL). (not really implemented)
* - 0x8
- - All writes to the file must be synchronous (EXT4\_SYNC\_FL).
+ - All writes to the file must be synchronous (EXT4_SYNC_FL).
* - 0x10
- - File is immutable (EXT4\_IMMUTABLE\_FL).
+ - File is immutable (EXT4_IMMUTABLE_FL).
* - 0x20
- - File can only be appended (EXT4\_APPEND\_FL).
+ - File can only be appended (EXT4_APPEND_FL).
* - 0x40
- - The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL).
+ - The dump(1) utility should not dump this file (EXT4_NODUMP_FL).
* - 0x80
- - Do not update access time (EXT4\_NOATIME\_FL).
+ - Do not update access time (EXT4_NOATIME_FL).
* - 0x100
- - Dirty compressed file (EXT4\_DIRTY\_FL). (not used)
+ - Dirty compressed file (EXT4_DIRTY_FL). (not used)
* - 0x200
- - File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used)
+ - File has one or more compressed clusters (EXT4_COMPRBLK_FL). (not used)
* - 0x400
- - Do not compress file (EXT4\_NOCOMPR\_FL). (not used)
+ - Do not compress file (EXT4_NOCOMPR_FL). (not used)
* - 0x800
- - Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was
- EXT4\_ECOMPR\_FL (compression error), which was never used.
+ - Encrypted inode (EXT4_ENCRYPT_FL). This bit value previously was
+ EXT4_ECOMPR_FL (compression error), which was never used.
* - 0x1000
- - Directory has hashed indexes (EXT4\_INDEX\_FL).
+ - Directory has hashed indexes (EXT4_INDEX_FL).
* - 0x2000
- - AFS magic directory (EXT4\_IMAGIC\_FL).
+ - AFS magic directory (EXT4_IMAGIC_FL).
* - 0x4000
- File data must always be written through the journal
- (EXT4\_JOURNAL\_DATA\_FL).
+ (EXT4_JOURNAL_DATA_FL).
* - 0x8000
- - File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4)
+ - File tail should not be merged (EXT4_NOTAIL_FL). (not used by ext4)
* - 0x10000
- All directory entry data should be written synchronously (see
- ``dirsync``) (EXT4\_DIRSYNC\_FL).
+ ``dirsync``) (EXT4_DIRSYNC_FL).
* - 0x20000
- - Top of directory hierarchy (EXT4\_TOPDIR\_FL).
+ - Top of directory hierarchy (EXT4_TOPDIR_FL).
* - 0x40000
- - This is a huge file (EXT4\_HUGE\_FILE\_FL).
+ - This is a huge file (EXT4_HUGE_FILE_FL).
* - 0x80000
- - Inode uses extents (EXT4\_EXTENTS\_FL).
+ - Inode uses extents (EXT4_EXTENTS_FL).
* - 0x100000
- - Verity protected file (EXT4\_VERITY\_FL).
+ - Verity protected file (EXT4_VERITY_FL).
* - 0x200000
- Inode stores a large extended attribute value in its data blocks
- (EXT4\_EA\_INODE\_FL).
+ (EXT4_EA_INODE_FL).
* - 0x400000
- - This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL).
+ - This file has blocks allocated past EOF (EXT4_EOFBLOCKS_FL).
(deprecated)
* - 0x01000000
- Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline)
@@ -294,21 +294,21 @@ The ``i_flags`` field is a combination of these values:
- Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in
mainline)
* - 0x10000000
- - Inode has inline data (EXT4\_INLINE\_DATA\_FL).
+ - Inode has inline data (EXT4_INLINE_DATA_FL).
* - 0x20000000
- - Create children with the same project ID (EXT4\_PROJINHERIT\_FL).
+ - Create children with the same project ID (EXT4_PROJINHERIT_FL).
* - 0x80000000
- - Reserved for ext4 library (EXT4\_RESERVED\_FL).
+ - Reserved for ext4 library (EXT4_RESERVED_FL).
* -
- Aggregate flags:
* - 0x705BDFFF
- User-visible flags.
* - 0x604BC0FF
- - User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and
- EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's
- EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of
+ - User-modifiable flags. Note that while EXT4_JOURNAL_DATA_FL and
+ EXT4_EXTENTS_FL can be set with setattr, they are not in the kernel's
+ EXT4_FL_USER_MODIFIABLE mask, since it needs to handle the setting of
these flags in a special manner and they are masked out of the set of
- flags that are saved directly to i\_flags.
+ flags that are saved directly to i_flags.
.. _i_osd1:
@@ -325,9 +325,9 @@ Linux:
- Name
- Description
* - 0x0
- - \_\_le32
- - l\_i\_version
- - Inode version. However, if the EA\_INODE inode flag is set, this inode
+ - __le32
+ - l_i_version
+ - Inode version. However, if the EA_INODE inode flag is set, this inode
stores an extended attribute value and this field contains the upper 32
bits of the attribute value's reference count.
@@ -342,8 +342,8 @@ Hurd:
- Name
- Description
* - 0x0
- - \_\_le32
- - h\_i\_translator
+ - __le32
+ - h_i_translator
- ??
Masix:
@@ -357,8 +357,8 @@ Masix:
- Name
- Description
* - 0x0
- - \_\_le32
- - m\_i\_reserved
+ - __le32
+ - m_i_reserved
- ??
.. _i_osd2:
@@ -376,30 +376,30 @@ Linux:
- Name
- Description
* - 0x0
- - \_\_le16
- - l\_i\_blocks\_high
+ - __le16
+ - l_i_blocks_high
- Upper 16-bits of the block count. Please see the note attached to
- i\_blocks\_lo.
+ i_blocks_lo.
* - 0x2
- - \_\_le16
- - l\_i\_file\_acl\_high
+ - __le16
+ - l_i_file_acl_high
- Upper 16-bits of the extended attribute block (historically, the file
ACL location). See the Extended Attributes section below.
* - 0x4
- - \_\_le16
- - l\_i\_uid\_high
+ - __le16
+ - l_i_uid_high
- Upper 16-bits of the Owner UID.
* - 0x6
- - \_\_le16
- - l\_i\_gid\_high
+ - __le16
+ - l_i_gid_high
- Upper 16-bits of the GID.
* - 0x8
- - \_\_le16
- - l\_i\_checksum\_lo
+ - __le16
+ - l_i_checksum_lo
- Lower 16-bits of the inode checksum.
* - 0xA
- - \_\_le16
- - l\_i\_reserved
+ - __le16
+ - l_i_reserved
- Unused.
Hurd:
@@ -413,24 +413,24 @@ Hurd:
- Name
- Description
* - 0x0
- - \_\_le16
- - h\_i\_reserved1
+ - __le16
+ - h_i_reserved1
- ??
* - 0x2
- - \_\_u16
- - h\_i\_mode\_high
+ - __u16
+ - h_i_mode_high
- Upper 16-bits of the file mode.
* - 0x4
- - \_\_le16
- - h\_i\_uid\_high
+ - __le16
+ - h_i_uid_high
- Upper 16-bits of the Owner UID.
* - 0x6
- - \_\_le16
- - h\_i\_gid\_high
+ - __le16
+ - h_i_gid_high
- Upper 16-bits of the GID.
* - 0x8
- - \_\_u32
- - h\_i\_author
+ - __u32
+ - h_i_author
- Author code?
Masix:
@@ -444,17 +444,17 @@ Masix:
- Name
- Description
* - 0x0
- - \_\_le16
- - h\_i\_reserved1
+ - __le16
+ - h_i_reserved1
- ??
* - 0x2
- - \_\_u16
- - m\_i\_file\_acl\_high
+ - __u16
+ - m_i_file_acl_high
- Upper 16-bits of the extended attribute block (historically, the file
ACL location).
* - 0x4
- - \_\_u32
- - m\_i\_reserved2[2]
+ - __u32
+ - m_i_reserved2[2]
- ??
Inode Size
@@ -466,11 +466,11 @@ In ext2 and ext3, the inode structure size was fixed at 128 bytes
on-disk inode at format time for all inodes in the filesystem to provide
space beyond the end of the original ext2 inode. The on-disk inode
record size is recorded in the superblock as ``s_inode_size``. The
-number of bytes actually used by struct ext4\_inode beyond the original
+number of bytes actually used by struct ext4_inode beyond the original
128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each
-inode, which allows struct ext4\_inode to grow for a new kernel without
+inode, which allows struct ext4_inode to grow for a new kernel without
having to upgrade all of the on-disk inodes. Access to fields beyond
-EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within
+EXT2_GOOD_OLD_INODE_SIZE should be verified to be within
``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as
of August 2019) the inode structure is 160 bytes
(``i_extra_isize = 32``). The extra space between the end of the inode
@@ -516,7 +516,7 @@ creation time (crtime); this field is 64-bits wide and decoded in the
same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible
through the regular stat() interface, though debugfs will report them.
-We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)).
+We use the 32-bit signed time value plus (2^32 * (extra epoch bits)).
In other words:
.. list-table::
@@ -525,8 +525,8 @@ In other words:
* - Extra epoch bits
- MSB of 32-bit time
- - Adjustment for signed 32-bit to 64-bit tv\_sec
- - Decoded 64-bit tv\_sec
+ - Adjustment for signed 32-bit to 64-bit tv_sec
+ - Decoded 64-bit tv_sec
- valid time range
* - 0 0
- 1
diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst
index 5fad38860f17..a6bef5293a60 100644
--- a/Documentation/filesystems/ext4/journal.rst
+++ b/Documentation/filesystems/ext4/journal.rst
@@ -63,8 +63,8 @@ Generally speaking, the journal has this format:
:header-rows: 1
* - Superblock
- - descriptor\_block (data\_blocks or revocation\_block) [more data or
- revocations] commmit\_block
+ - descriptor_block (data_blocks or revocation_block) [more data or
+ revocations] commmit_block
- [more transactions...]
* -
- One transaction
@@ -93,8 +93,8 @@ superblock.
* - 1024 bytes of padding
- ext4 Superblock
- Journal Superblock
- - descriptor\_block (data\_blocks or revocation\_block) [more data or
- revocations] commmit\_block
+ - descriptor_block (data_blocks or revocation_block) [more data or
+ revocations] commmit_block
- [more transactions...]
* -
-
@@ -117,17 +117,17 @@ Every block in the journal starts with a common 12-byte header
- Name
- Description
* - 0x0
- - \_\_be32
- - h\_magic
+ - __be32
+ - h_magic
- jbd2 magic number, 0xC03B3998.
* - 0x4
- - \_\_be32
- - h\_blocktype
+ - __be32
+ - h_blocktype
- Description of what this block contains. See the jbd2_blocktype_ table
below.
* - 0x8
- - \_\_be32
- - h\_sequence
+ - __be32
+ - h_sequence
- The transaction ID that goes with this block.
.. _jbd2_blocktype:
@@ -177,99 +177,99 @@ which is 1024 bytes long:
-
- Static information describing the journal.
* - 0x0
- - journal\_header\_t (12 bytes)
- - s\_header
+ - journal_header_t (12 bytes)
+ - s_header
- Common header identifying this as a superblock.
* - 0xC
- - \_\_be32
- - s\_blocksize
+ - __be32
+ - s_blocksize
- Journal device block size.
* - 0x10
- - \_\_be32
- - s\_maxlen
+ - __be32
+ - s_maxlen
- Total number of blocks in this journal.
* - 0x14
- - \_\_be32
- - s\_first
+ - __be32
+ - s_first
- First block of log information.
* -
-
-
- Dynamic information describing the current state of the log.
* - 0x18
- - \_\_be32
- - s\_sequence
+ - __be32
+ - s_sequence
- First commit ID expected in log.
* - 0x1C
- - \_\_be32
- - s\_start
+ - __be32
+ - s_start
- Block number of the start of log. Contrary to the comments, this field
being zero does not imply that the journal is clean!
* - 0x20
- - \_\_be32
- - s\_errno
- - Error value, as set by jbd2\_journal\_abort().
+ - __be32
+ - s_errno
+ - Error value, as set by jbd2_journal_abort().
* -
-
-
- The remaining fields are only valid in a v2 superblock.
* - 0x24
- - \_\_be32
- - s\_feature\_compat;
+ - __be32
+ - s_feature_compat;
- Compatible feature set. See the table jbd2_compat_ below.
* - 0x28
- - \_\_be32
- - s\_feature\_incompat
+ - __be32
+ - s_feature_incompat
- Incompatible feature set. See the table jbd2_incompat_ below.
* - 0x2C
- - \_\_be32
- - s\_feature\_ro\_compat
+ - __be32
+ - s_feature_ro_compat
- Read-only compatible feature set. There aren't any of these currently.
* - 0x30
- - \_\_u8
- - s\_uuid[16]
+ - __u8
+ - s_uuid[16]
- 128-bit uuid for journal. This is compared against the copy in the ext4
super block at mount time.
* - 0x40
- - \_\_be32
- - s\_nr\_users
+ - __be32
+ - s_nr_users
- Number of file systems sharing this journal.
* - 0x44
- - \_\_be32
- - s\_dynsuper
+ - __be32
+ - s_dynsuper
- Location of dynamic super block copy. (Not used?)
* - 0x48
- - \_\_be32
- - s\_max\_transaction
+ - __be32
+ - s_max_transaction
- Limit of journal blocks per transaction. (Not used?)
* - 0x4C
- - \_\_be32
- - s\_max\_trans\_data
+ - __be32
+ - s_max_trans_data
- Limit of data blocks per transaction. (Not used?)
* - 0x50
- - \_\_u8
- - s\_checksum\_type
+ - __u8
+ - s_checksum_type
- Checksum algorithm used for the journal. See jbd2_checksum_type_ for
more info.
* - 0x51
- - \_\_u8[3]
- - s\_padding2
+ - __u8[3]
+ - s_padding2
-
* - 0x54
- - \_\_be32
- - s\_num\_fc\_blocks
+ - __be32
+ - s_num_fc_blocks
- Number of fast commit blocks in the journal.
* - 0x58
- - \_\_u32
- - s\_padding[42]
+ - __u32
+ - s_padding[42]
-
* - 0xFC
- - \_\_be32
- - s\_checksum
+ - __be32
+ - s_checksum
- Checksum of the entire superblock, with this field set to zero.
* - 0x100
- - \_\_u8
- - s\_users[16\*48]
+ - __u8
+ - s_users[16*48]
- ids of all file systems sharing the log. e2fsprogs/Linux don't allow
shared external journals, but I imagine Lustre (or ocfs2?), which use
the jbd2 code, might.
@@ -286,7 +286,7 @@ The journal compat features are any combination of the following:
- Description
* - 0x1
- Journal maintains checksums on the data blocks.
- (JBD2\_FEATURE\_COMPAT\_CHECKSUM)
+ (JBD2_FEATURE_COMPAT_CHECKSUM)
.. _jbd2_incompat:
@@ -299,23 +299,23 @@ The journal incompat features are any combination of the following:
* - Value
- Description
* - 0x1
- - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE)
+ - Journal has block revocation records. (JBD2_FEATURE_INCOMPAT_REVOKE)
* - 0x2
- Journal can deal with 64-bit block numbers.
- (JBD2\_FEATURE\_INCOMPAT\_64BIT)
+ (JBD2_FEATURE_INCOMPAT_64BIT)
* - 0x4
- - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT)
+ - Journal commits asynchronously. (JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)
* - 0x8
- This journal uses v2 of the checksum on-disk format. Each journal
metadata block gets its own checksum, and the block tags in the
descriptor table contain checksums for each of the data blocks in the
- journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2)
+ journal. (JBD2_FEATURE_INCOMPAT_CSUM_V2)
* - 0x10
- This journal uses v3 of the checksum on-disk format. This is the same as
v2, but the journal block tag size is fixed regardless of the size of
- block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)
+ block numbers. (JBD2_FEATURE_INCOMPAT_CSUM_V3)
* - 0x20
- - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT)
+ - Journal has fast commit blocks. (JBD2_FEATURE_INCOMPAT_FAST_COMMIT)
.. _jbd2_checksum_type:
@@ -355,11 +355,11 @@ Descriptor blocks consume at least 36 bytes, but use a full block:
- Name
- Descriptor
* - 0x0
- - journal\_header\_t
+ - journal_header_t
- (open coded)
- Common block header.
* - 0xC
- - struct journal\_block\_tag\_s
+ - struct journal_block_tag_s
- open coded array[]
- Enough tags either to fill up the block or to describe all the data
blocks that follow this descriptor block.
@@ -367,7 +367,7 @@ Descriptor blocks consume at least 36 bytes, but use a full block:
Journal block tags have any of the following formats, depending on which
journal feature and block tag flags are set.
-If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is
+If JBD2_FEATURE_INCOMPAT_CSUM_V3 is set, the journal block tag is
defined as ``struct journal_block_tag3_s``, which looks like the
following. The size is 16 or 32 bytes.
@@ -380,24 +380,24 @@ following. The size is 16 or 32 bytes.
- Name
- Descriptor
* - 0x0
- - \_\_be32
- - t\_blocknr
+ - __be32
+ - t_blocknr
- Lower 32-bits of the location of where the corresponding data block
should end up on disk.
* - 0x4
- - \_\_be32
- - t\_flags
+ - __be32
+ - t_flags
- Flags that go with the descriptor. See the table jbd2_tag_flags_ for
more info.
* - 0x8
- - \_\_be32
- - t\_blocknr\_high
+ - __be32
+ - t_blocknr_high
- Upper 32-bits of the location of where the corresponding data block
- should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is
+ should end up on disk. This is zero if JBD2_FEATURE_INCOMPAT_64BIT is
not enabled.
* - 0xC
- - \_\_be32
- - t\_checksum
+ - __be32
+ - t_checksum
- Checksum of the journal UUID, the sequence number, and the data block.
* -
-
@@ -433,7 +433,7 @@ The journal tag flags are any combination of the following:
* - 0x8
- This is the last tag in this descriptor block.
-If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag
+If JBD2_FEATURE_INCOMPAT_CSUM_V3 is NOT set, the journal block tag
is defined as ``struct journal_block_tag_s``, which looks like the
following. The size is 8, 12, 24, or 28 bytes:
@@ -446,18 +446,18 @@ following. The size is 8, 12, 24, or 28 bytes:
- Name
- Descriptor
* - 0x0
- - \_\_be32
- - t\_blocknr
+ - __be32
+ - t_blocknr
- Lower 32-bits of the location of where the corresponding data block
should end up on disk.
* - 0x4
- - \_\_be16
- - t\_checksum
+ - __be16
+ - t_checksum
- Checksum of the journal UUID, the sequence number, and the data block.
Note that only the lower 16 bits are stored.
* - 0x6
- - \_\_be16
- - t\_flags
+ - __be16
+ - t_flags
- Flags that go with the descriptor. See the table jbd2_tag_flags_ for
more info.
* -
@@ -466,8 +466,8 @@ following. The size is 8, 12, 24, or 28 bytes:
- This next field is only present if the super block indicates support for
64-bit block numbers.
* - 0x8
- - \_\_be32
- - t\_blocknr\_high
+ - __be32
+ - t_blocknr_high
- Upper 32-bits of the location of where the corresponding data block
should end up on disk.
* -
@@ -483,8 +483,8 @@ following. The size is 8, 12, 24, or 28 bytes:
``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that
field.
-If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
-JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
+If JBD2_FEATURE_INCOMPAT_CSUM_V2 or
+JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the block is a
``struct jbd2_journal_block_tail``, which looks like this:
.. list-table::
@@ -496,8 +496,8 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
- Name
- Descriptor
* - 0x0
- - \_\_be32
- - t\_checksum
+ - __be32
+ - t_checksum
- Checksum of the journal UUID + the descriptor block, with this field set
to zero.
@@ -538,25 +538,25 @@ length, but use a full block:
- Name
- Description
* - 0x0
- - journal\_header\_t
- - r\_header
+ - journal_header_t
+ - r_header
- Common block header.
* - 0xC
- - \_\_be32
- - r\_count
+ - __be32
+ - r_count
- Number of bytes used in this block.
* - 0x10
- - \_\_be32 or \_\_be64
+ - __be32 or __be64
- blocks[0]
- Blocks to revoke.
-After r\_count is a linear array of block numbers that are effectively
+After r_count is a linear array of block numbers that are effectively
revoked by this transaction. The size of each block number is 8 bytes if
the superblock advertises 64-bit block number support, or 4 bytes
otherwise.
-If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
-JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation
+If JBD2_FEATURE_INCOMPAT_CSUM_V2 or
+JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the revocation
block is a ``struct jbd2_journal_revoke_tail``, which has this format:
.. list-table::
@@ -568,8 +568,8 @@ block is a ``struct jbd2_journal_revoke_tail``, which has this format:
- Name
- Description
* - 0x0
- - \_\_be32
- - r\_checksum
+ - __be32
+ - r_checksum
- Checksum of the journal UUID + revocation block
Commit Block
@@ -592,38 +592,38 @@ bytes long (but uses a full block):
- Name
- Descriptor
* - 0x0
- - journal\_header\_s
+ - journal_header_s
- (open coded)
- Common block header.
* - 0xC
- unsigned char
- - h\_chksum\_type
+ - h_chksum_type
- The type of checksum to use to verify the integrity of the data blocks
in the transaction. See jbd2_checksum_type_ for more info.
* - 0xD
- unsigned char
- - h\_chksum\_size
+ - h_chksum_size
- The number of bytes used by the checksum. Most likely 4.
* - 0xE
- unsigned char
- - h\_padding[2]
+ - h_padding[2]
-
* - 0x10
- - \_\_be32
- - h\_chksum[JBD2\_CHECKSUM\_BYTES]
+ - __be32
+ - h_chksum[JBD2_CHECKSUM_BYTES]
- 32 bytes of space to store checksums. If
- JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3
+ JBD2_FEATURE_INCOMPAT_CSUM_V2 or JBD2_FEATURE_INCOMPAT_CSUM_V3
are set, the first ``__be32`` is the checksum of the journal UUID and
the entire commit block, with this field zeroed. If
- JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the
+ JBD2_FEATURE_COMPAT_CHECKSUM is set, the first ``__be32`` is the
crc32 of all the blocks already written to the transaction.
* - 0x30
- - \_\_be64
- - h\_commit\_sec
+ - __be64
+ - h_commit_sec
- The time that the transaction was committed, in seconds since the epoch.
* - 0x38
- - \_\_be32
- - h\_commit\_nsec
+ - __be32
+ - h_commit_nsec
- Nanoseconds component of the above timestamp.
Fast commits
diff --git a/Documentation/filesystems/ext4/mmp.rst b/Documentation/filesystems/ext4/mmp.rst
index 25660981d93c..174dd6538737 100644
--- a/Documentation/filesystems/ext4/mmp.rst
+++ b/Documentation/filesystems/ext4/mmp.rst
@@ -7,8 +7,8 @@ Multiple mount protection (MMP) is a feature that protects the
filesystem against multiple hosts trying to use the filesystem
simultaneously. When a filesystem is opened (for mounting, or fsck,
etc.), the MMP code running on the node (call it node A) checks a
-sequence number. If the sequence number is EXT4\_MMP\_SEQ\_CLEAN, the
-open continues. If the sequence number is EXT4\_MMP\_SEQ\_FSCK, then
+sequence number. If the sequence number is EXT4_MMP_SEQ_CLEAN, the
+open continues. If the sequence number is EXT4_MMP_SEQ_FSCK, then
fsck is (hopefully) running, and open fails immediately. Otherwise, the
open code will wait for twice the specified MMP check interval and check
the sequence number again. If the sequence number has changed, then the
@@ -40,38 +40,38 @@ The MMP structure (``struct mmp_struct``) is as follows:
- Name
- Description
* - 0x0
- - \_\_le32
- - mmp\_magic
+ - __le32
+ - mmp_magic
- Magic number for MMP, 0x004D4D50 (“MMP”).
* - 0x4
- - \_\_le32
- - mmp\_seq
+ - __le32
+ - mmp_seq
- Sequence number, updated periodically.
* - 0x8
- - \_\_le64
- - mmp\_time
+ - __le64
+ - mmp_time
- Time that the MMP block was last updated.
* - 0x10
- char[64]
- - mmp\_nodename
+ - mmp_nodename
- Hostname of the node that opened the filesystem.
* - 0x50
- char[32]
- - mmp\_bdevname
+ - mmp_bdevname
- Block device name of the filesystem.
* - 0x70
- - \_\_le16
- - mmp\_check\_interval
+ - __le16
+ - mmp_check_interval
- The MMP re-check interval, in seconds.
* - 0x72
- - \_\_le16
- - mmp\_pad1
+ - __le16
+ - mmp_pad1
- Zero.
* - 0x74
- - \_\_le32[226]
- - mmp\_pad2
+ - __le32[226]
+ - mmp_pad2
- Zero.
* - 0x3FC
- - \_\_le32
- - mmp\_checksum
+ - __le32
+ - mmp_checksum
- Checksum of the MMP block.
diff --git a/Documentation/filesystems/ext4/overview.rst b/Documentation/filesystems/ext4/overview.rst
index 123ebfde47ee..0fad6eda6e15 100644
--- a/Documentation/filesystems/ext4/overview.rst
+++ b/Documentation/filesystems/ext4/overview.rst
@@ -7,7 +7,7 @@ An ext4 file system is split into a series of block groups. To reduce
performance difficulties due to fragmentation, the block allocator tries
very hard to keep each file's blocks within the same group, thereby
reducing seek times. The size of a block group is specified in
-``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 \*
+``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 *
``block_size_in_bytes``. With the default block size of 4KiB, each group
will contain 32,768 blocks, for a length of 128MiB. The number of block
groups is the size of the device divided by the size of a block group.
diff --git a/Documentation/filesystems/ext4/special_inodes.rst b/Documentation/filesystems/ext4/special_inodes.rst
index 94f304e3a0a7..fc0636901fa0 100644
--- a/Documentation/filesystems/ext4/special_inodes.rst
+++ b/Documentation/filesystems/ext4/special_inodes.rst
@@ -34,7 +34,7 @@ ext4 reserves some inode for special features, as follows:
* - 10
- Replica inode, used for some non-upstream feature?
* - 11
- - Traditional first non-reserved inode. Usually this is the lost+found directory. See s\_first\_ino in the superblock.
+ - Traditional first non-reserved inode. Usually this is the lost+found directory. See s_first_ino in the superblock.
Note that there are also some inodes allocated from non-reserved inode numbers
for other filesystem features which are not referenced from standard directory
@@ -47,9 +47,9 @@ hierarchy. These are generally reference from the superblock. They are:
* - Superblock field
- Description
- * - s\_lpf\_ino
+ * - s_lpf_ino
- Inode number of lost+found directory.
- * - s\_prj\_quota\_inum
+ * - s_prj_quota_inum
- Inode number of quota file tracking project quotas
- * - s\_orphan\_file\_inum
+ * - s_orphan_file_inum
- Inode number of file tracking orphan inodes.
diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst
index f6a548e957bb..268888522e35 100644
--- a/Documentation/filesystems/ext4/super.rst
+++ b/Documentation/filesystems/ext4/super.rst
@@ -7,7 +7,7 @@ The superblock records various information about the enclosing
filesystem, such as block counts, inode counts, supported features,
maintenance information, and more.
-If the sparse\_super feature flag is set, redundant copies of the
+If the sparse_super feature flag is set, redundant copies of the
superblock and group descriptors are kept only in the groups whose group
number is either 0 or a power of 3, 5, or 7. If the flag is not set,
redundant copies are kept in all groups.
@@ -27,107 +27,107 @@ The ext4 superblock is laid out as follows in
- Name
- Description
* - 0x0
- - \_\_le32
- - s\_inodes\_count
+ - __le32
+ - s_inodes_count
- Total inode count.
* - 0x4
- - \_\_le32
- - s\_blocks\_count\_lo
+ - __le32
+ - s_blocks_count_lo
- Total block count.
* - 0x8
- - \_\_le32
- - s\_r\_blocks\_count\_lo
+ - __le32
+ - s_r_blocks_count_lo
- This number of blocks can only be allocated by the super-user.
* - 0xC
- - \_\_le32
- - s\_free\_blocks\_count\_lo
+ - __le32
+ - s_free_blocks_count_lo
- Free block count.
* - 0x10
- - \_\_le32
- - s\_free\_inodes\_count
+ - __le32
+ - s_free_inodes_count
- Free inode count.
* - 0x14
- - \_\_le32
- - s\_first\_data\_block
+ - __le32
+ - s_first_data_block
- First data block. This must be at least 1 for 1k-block filesystems and
is typically 0 for all other block sizes.
* - 0x18
- - \_\_le32
- - s\_log\_block\_size
- - Block size is 2 ^ (10 + s\_log\_block\_size).
+ - __le32
+ - s_log_block_size
+ - Block size is 2 ^ (10 + s_log_block_size).
* - 0x1C
- - \_\_le32
- - s\_log\_cluster\_size
- - Cluster size is 2 ^ (10 + s\_log\_cluster\_size) blocks if bigalloc is
- enabled. Otherwise s\_log\_cluster\_size must equal s\_log\_block\_size.
+ - __le32
+ - s_log_cluster_size
+ - Cluster size is 2 ^ (10 + s_log_cluster_size) blocks if bigalloc is
+ enabled. Otherwise s_log_cluster_size must equal s_log_block_size.
* - 0x20
- - \_\_le32
- - s\_blocks\_per\_group
+ - __le32
+ - s_blocks_per_group
- Blocks per group.
* - 0x24
- - \_\_le32
- - s\_clusters\_per\_group
+ - __le32
+ - s_clusters_per_group
- Clusters per group, if bigalloc is enabled. Otherwise
- s\_clusters\_per\_group must equal s\_blocks\_per\_group.
+ s_clusters_per_group must equal s_blocks_per_group.
* - 0x28
- - \_\_le32
- - s\_inodes\_per\_group
+ - __le32
+ - s_inodes_per_group
- Inodes per group.
* - 0x2C
- - \_\_le32
- - s\_mtime
+ - __le32
+ - s_mtime
- Mount time, in seconds since the epoch.
* - 0x30
- - \_\_le32
- - s\_wtime
+ - __le32
+ - s_wtime
- Write time, in seconds since the epoch.
* - 0x34
- - \_\_le16
- - s\_mnt\_count
+ - __le16
+ - s_mnt_count
- Number of mounts since the last fsck.
* - 0x36
- - \_\_le16
- - s\_max\_mnt\_count
+ - __le16
+ - s_max_mnt_count
- Number of mounts beyond which a fsck is needed.
* - 0x38
- - \_\_le16
- - s\_magic
+ - __le16
+ - s_magic
- Magic signature, 0xEF53
* - 0x3A
- - \_\_le16
- - s\_state
+ - __le16
+ - s_state
- File system state. See super_state_ for more info.
* - 0x3C
- - \_\_le16
- - s\_errors
+ - __le16
+ - s_errors
- Behaviour when detecting errors. See super_errors_ for more info.
* - 0x3E
- - \_\_le16
- - s\_minor\_rev\_level
+ - __le16
+ - s_minor_rev_level
- Minor revision level.
* - 0x40
- - \_\_le32
- - s\_lastcheck
+ - __le32
+ - s_lastcheck
- Time of last check, in seconds since the epoch.
* - 0x44
- - \_\_le32
- - s\_checkinterval
+ - __le32
+ - s_checkinterval
- Maximum time between checks, in seconds.
* - 0x48
- - \_\_le32
- - s\_creator\_os
+ - __le32
+ - s_creator_os
- Creator OS. See the table super_creator_ for more info.
* - 0x4C
- - \_\_le32
- - s\_rev\_level
+ - __le32
+ - s_rev_level
- Revision level. See the table super_revision_ for more info.
* - 0x50
- - \_\_le16
- - s\_def\_resuid
+ - __le16
+ - s_def_resuid
- Default uid for reserved blocks.
* - 0x52
- - \_\_le16
- - s\_def\_resgid
+ - __le16
+ - s_def_resgid
- Default gid for reserved blocks.
* -
-
@@ -143,50 +143,50 @@ The ext4 superblock is laid out as follows in
about a feature in either the compatible or incompatible feature set, it
must abort and not try to meddle with things it doesn't understand...
* - 0x54
- - \_\_le32
- - s\_first\_ino
+ - __le32
+ - s_first_ino
- First non-reserved inode.
* - 0x58
- - \_\_le16
- - s\_inode\_size
+ - __le16
+ - s_inode_size
- Size of inode structure, in bytes.
* - 0x5A
- - \_\_le16
- - s\_block\_group\_nr
+ - __le16
+ - s_block_group_nr
- Block group # of this superblock.
* - 0x5C
- - \_\_le32
- - s\_feature\_compat
+ - __le32
+ - s_feature_compat
- Compatible feature set flags. Kernel can still read/write this fs even
if it doesn't understand a flag; fsck should not do that. See the
super_compat_ table for more info.
* - 0x60
- - \_\_le32
- - s\_feature\_incompat
+ - __le32
+ - s_feature_incompat
- Incompatible feature set. If the kernel or fsck doesn't understand one
of these bits, it should stop. See the super_incompat_ table for more
info.
* - 0x64
- - \_\_le32
- - s\_feature\_ro\_compat
+ - __le32
+ - s_feature_ro_compat
- Readonly-compatible feature set. If the kernel doesn't understand one of
these bits, it can still mount read-only. See the super_rocompat_ table
for more info.
* - 0x68
- - \_\_u8
- - s\_uuid[16]
+ - __u8
+ - s_uuid[16]
- 128-bit UUID for volume.
* - 0x78
- char
- - s\_volume\_name[16]
+ - s_volume_name[16]
- Volume label.
* - 0x88
- char
- - s\_last\_mounted[64]
+ - s_last_mounted[64]
- Directory where filesystem was last mounted.
* - 0xC8
- - \_\_le32
- - s\_algorithm\_usage\_bitmap
+ - __le32
+ - s_algorithm_usage_bitmap
- For compression (Not used in e2fsprogs/Linux)
* -
-
@@ -194,18 +194,18 @@ The ext4 superblock is laid out as follows in
- Performance hints. Directory preallocation should only happen if the
EXT4_FEATURE_COMPAT_DIR_PREALLOC flag is on.
* - 0xCC
- - \_\_u8
- - s\_prealloc\_blocks
+ - __u8
+ - s_prealloc_blocks
- #. of blocks to try to preallocate for ... files? (Not used in
e2fsprogs/Linux)
* - 0xCD
- - \_\_u8
- - s\_prealloc\_dir\_blocks
+ - __u8
+ - s_prealloc_dir_blocks
- #. of blocks to preallocate for directories. (Not used in
e2fsprogs/Linux)
* - 0xCE
- - \_\_le16
- - s\_reserved\_gdt\_blocks
+ - __le16
+ - s_reserved_gdt_blocks
- Number of reserved GDT entries for future filesystem expansion.
* -
-
@@ -213,281 +213,281 @@ The ext4 superblock is laid out as follows in
- Journalling support is valid only if EXT4_FEATURE_COMPAT_HAS_JOURNAL is
set.
* - 0xD0
- - \_\_u8
- - s\_journal\_uuid[16]
+ - __u8
+ - s_journal_uuid[16]
- UUID of journal superblock
* - 0xE0
- - \_\_le32
- - s\_journal\_inum
+ - __le32
+ - s_journal_inum
- inode number of journal file.
* - 0xE4
- - \_\_le32
- - s\_journal\_dev
+ - __le32
+ - s_journal_dev
- Device number of journal file, if the external journal feature flag is
set.
* - 0xE8
- - \_\_le32
- - s\_last\_orphan
+ - __le32
+ - s_last_orphan
- Start of list of orphaned inodes to delete.
* - 0xEC
- - \_\_le32
- - s\_hash\_seed[4]
+ - __le32
+ - s_hash_seed[4]
- HTREE hash seed.
* - 0xFC
- - \_\_u8
- - s\_def\_hash\_version
+ - __u8
+ - s_def_hash_version
- Default hash algorithm to use for directory hashes. See super_def_hash_
for more info.
* - 0xFD
- - \_\_u8
- - s\_jnl\_backup\_type
- - If this value is 0 or EXT3\_JNL\_BACKUP\_BLOCKS (1), then the
+ - __u8
+ - s_jnl_backup_type
+ - If this value is 0 or EXT3_JNL_BACKUP_BLOCKS (1), then the
``s_jnl_blocks`` field contains a duplicate copy of the inode's
``i_block[]`` array and ``i_size``.
* - 0xFE
- - \_\_le16
- - s\_desc\_size
+ - __le16
+ - s_desc_size
- Size of group descriptors, in bytes, if the 64bit incompat feature flag
is set.
* - 0x100
- - \_\_le32
- - s\_default\_mount\_opts
+ - __le32
+ - s_default_mount_opts
- Default mount options. See the super_mountopts_ table for more info.
* - 0x104
- - \_\_le32
- - s\_first\_meta\_bg
- - First metablock block group, if the meta\_bg feature is enabled.
+ - __le32
+ - s_first_meta_bg
+ - First metablock block group, if the meta_bg feature is enabled.
* - 0x108
- - \_\_le32
- - s\_mkfs\_time
+ - __le32
+ - s_mkfs_time
- When the filesystem was created, in seconds since the epoch.
* - 0x10C
- - \_\_le32
- - s\_jnl\_blocks[17]
+ - __le32
+ - s_jnl_blocks[17]
- Backup copy of the journal inode's ``i_block[]`` array in the first 15
- elements and i\_size\_high and i\_size in the 16th and 17th elements,
+ elements and i_size_high and i_size in the 16th and 17th elements,
respectively.
* -
-
-
- 64bit support is valid only if EXT4_FEATURE_COMPAT_64BIT is set.
* - 0x150
- - \_\_le32
- - s\_blocks\_count\_hi
+ - __le32
+ - s_blocks_count_hi
- High 32-bits of the block count.
* - 0x154
- - \_\_le32
- - s\_r\_blocks\_count\_hi
+ - __le32
+ - s_r_blocks_count_hi
- High 32-bits of the reserved block count.
* - 0x158
- - \_\_le32
- - s\_free\_blocks\_count\_hi
+ - __le32
+ - s_free_blocks_count_hi
- High 32-bits of the free block count.
* - 0x15C
- - \_\_le16
- - s\_min\_extra\_isize
+ - __le16
+ - s_min_extra_isize
- All inodes have at least # bytes.
* - 0x15E
- - \_\_le16
- - s\_want\_extra\_isize
+ - __le16
+ - s_want_extra_isize
- New inodes should reserve # bytes.
* - 0x160
- - \_\_le32
- - s\_flags
+ - __le32
+ - s_flags
- Miscellaneous flags. See the super_flags_ table for more info.
* - 0x164
- - \_\_le16
- - s\_raid\_stride
+ - __le16
+ - s_raid_stride
- RAID stride. This is the number of logical blocks read from or written
to the disk before moving to the next disk. This affects the placement
of filesystem metadata, which will hopefully make RAID storage faster.
* - 0x166
- - \_\_le16
- - s\_mmp\_interval
+ - __le16
+ - s_mmp_interval
- #. seconds to wait in multi-mount prevention (MMP) checking. In theory,
MMP is a mechanism to record in the superblock which host and device
have mounted the filesystem, in order to prevent multiple mounts. This
feature does not seem to be implemented...
* - 0x168
- - \_\_le64
- - s\_mmp\_block
+ - __le64
+ - s_mmp_block
- Block # for multi-mount protection data.
* - 0x170
- - \_\_le32
- - s\_raid\_stripe\_width
+ - __le32
+ - s_raid_stripe_width
- RAID stripe width. This is the number of logical blocks read from or
written to the disk before coming back to the current disk. This is used
by the block allocator to try to reduce the number of read-modify-write
operations in a RAID5/6.
* - 0x174
- - \_\_u8
- - s\_log\_groups\_per\_flex
+ - __u8
+ - s_log_groups_per_flex
- Size of a flexible block group is 2 ^ ``s_log_groups_per_flex``.
* - 0x175
- - \_\_u8
- - s\_checksum\_type
+ - __u8
+ - s_checksum_type
- Metadata checksum algorithm type. The only valid value is 1 (crc32c).
* - 0x176
- - \_\_le16
- - s\_reserved\_pad
+ - __le16
+ - s_reserved_pad
-
* - 0x178
- - \_\_le64
- - s\_kbytes\_written
+ - __le64
+ - s_kbytes_written
- Number of KiB written to this filesystem over its lifetime.
* - 0x180
- - \_\_le32
- - s\_snapshot\_inum
+ - __le32
+ - s_snapshot_inum
- inode number of active snapshot. (Not used in e2fsprogs/Linux.)
* - 0x184
- - \_\_le32
- - s\_snapshot\_id
+ - __le32
+ - s_snapshot_id
- Sequential ID of active snapshot. (Not used in e2fsprogs/Linux.)
* - 0x188
- - \_\_le64
- - s\_snapshot\_r\_blocks\_count
+ - __le64
+ - s_snapshot_r_blocks_count
- Number of blocks reserved for active snapshot's future use. (Not used in
e2fsprogs/Linux.)
* - 0x190
- - \_\_le32
- - s\_snapshot\_list
+ - __le32
+ - s_snapshot_list
- inode number of the head of the on-disk snapshot list. (Not used in
e2fsprogs/Linux.)
* - 0x194
- - \_\_le32
- - s\_error\_count
+ - __le32
+ - s_error_count
- Number of errors seen.
* - 0x198
- - \_\_le32
- - s\_first\_error\_time
+ - __le32
+ - s_first_error_time
- First time an error happened, in seconds since the epoch.
* - 0x19C
- - \_\_le32
- - s\_first\_error\_ino
+ - __le32
+ - s_first_error_ino
- inode involved in first error.
* - 0x1A0
- - \_\_le64
- - s\_first\_error\_block
+ - __le64
+ - s_first_error_block
- Number of block involved of first error.
* - 0x1A8
- - \_\_u8
- - s\_first\_error\_func[32]
+ - __u8
+ - s_first_error_func[32]
- Name of function where the error happened.
* - 0x1C8
- - \_\_le32
- - s\_first\_error\_line
+ - __le32
+ - s_first_error_line
- Line number where error happened.
* - 0x1CC
- - \_\_le32
- - s\_last\_error\_time
+ - __le32
+ - s_last_error_time
- Time of most recent error, in seconds since the epoch.
* - 0x1D0
- - \_\_le32
- - s\_last\_error\_ino
+ - __le32
+ - s_last_error_ino
- inode involved in most recent error.
* - 0x1D4
- - \_\_le32
- - s\_last\_error\_line
+ - __le32
+ - s_last_error_line
- Line number where most recent error happened.
* - 0x1D8
- - \_\_le64
- - s\_last\_error\_block
+ - __le64
+ - s_last_error_block
- Number of block involved in most recent error.
* - 0x1E0
- - \_\_u8
- - s\_last\_error\_func[32]
+ - __u8
+ - s_last_error_func[32]
- Name of function where the most recent error happened.
* - 0x200
- - \_\_u8
- - s\_mount\_opts[64]
+ - __u8
+ - s_mount_opts[64]
- ASCIIZ string of mount options.
* - 0x240
- - \_\_le32
- - s\_usr\_quota\_inum
+ - __le32
+ - s_usr_quota_inum
- Inode number of user `quota <quota>`__ file.
* - 0x244
- - \_\_le32
- - s\_grp\_quota\_inum
+ - __le32
+ - s_grp_quota_inum
- Inode number of group `quota <quota>`__ file.
* - 0x248
- - \_\_le32
- - s\_overhead\_blocks
+ - __le32
+ - s_overhead_blocks
- Overhead blocks/clusters in fs. (Huh? This field is always zero, which
means that the kernel calculates it dynamically.)
* - 0x24C
- - \_\_le32
- - s\_backup\_bgs[2]
- - Block groups containing superblock backups (if sparse\_super2)
+ - __le32
+ - s_backup_bgs[2]
+ - Block groups containing superblock backups (if sparse_super2)
* - 0x254
- - \_\_u8
- - s\_encrypt\_algos[4]
+ - __u8
+ - s_encrypt_algos[4]
- Encryption algorithms in use. There can be up to four algorithms in use
at any time; valid algorithm codes are given in the super_encrypt_ table
below.
* - 0x258
- - \_\_u8
- - s\_encrypt\_pw\_salt[16]
+ - __u8
+ - s_encrypt_pw_salt[16]
- Salt for the string2key algorithm for encryption.
* - 0x268
- - \_\_le32
- - s\_lpf\_ino
+ - __le32
+ - s_lpf_ino
- Inode number of lost+found
* - 0x26C
- - \_\_le32
- - s\_prj\_quota\_inum
+ - __le32
+ - s_prj_quota_inum
- Inode that tracks project quotas.
* - 0x270
- - \_\_le32
- - s\_checksum\_seed
- - Checksum seed used for metadata\_csum calculations. This value is
- crc32c(~0, $orig\_fs\_uuid).
+ - __le32
+ - s_checksum_seed
+ - Checksum seed used for metadata_csum calculations. This value is
+ crc32c(~0, $orig_fs_uuid).
* - 0x274
- - \_\_u8
- - s\_wtime_hi
+ - __u8
+ - s_wtime_hi
- Upper 8 bits of the s_wtime field.
* - 0x275
- - \_\_u8
- - s\_mtime_hi
+ - __u8
+ - s_mtime_hi
- Upper 8 bits of the s_mtime field.
* - 0x276
- - \_\_u8
- - s\_mkfs_time_hi
+ - __u8
+ - s_mkfs_time_hi
- Upper 8 bits of the s_mkfs_time field.
* - 0x277
- - \_\_u8
- - s\_lastcheck_hi
+ - __u8
+ - s_lastcheck_hi
- Upper 8 bits of the s_lastcheck_hi field.
* - 0x278
- - \_\_u8
- - s\_first_error_time_hi
+ - __u8
+ - s_first_error_time_hi
- Upper 8 bits of the s_first_error_time_hi field.
* - 0x279
- - \_\_u8
- - s\_last_error_time_hi
+ - __u8
+ - s_last_error_time_hi
- Upper 8 bits of the s_last_error_time_hi field.
* - 0x27A
- - \_\_u8
- - s\_pad[2]
+ - __u8
+ - s_pad[2]
- Zero padding.
* - 0x27C
- - \_\_le16
- - s\_encoding
+ - __le16
+ - s_encoding
- Filename charset encoding.
* - 0x27E
- - \_\_le16
- - s\_encoding_flags
+ - __le16
+ - s_encoding_flags
- Filename charset encoding flags.
* - 0x280
- - \_\_le32
- - s\_orphan\_file\_inum
+ - __le32
+ - s_orphan_file_inum
- Orphan file inode number.
* - 0x284
- - \_\_le32
- - s\_reserved[94]
+ - __le32
+ - s_reserved[94]
- Padding to the end of the block.
* - 0x3FC
- - \_\_le32
- - s\_checksum
+ - __le32
+ - s_checksum
- Superblock checksum.
.. _super_state:
@@ -574,44 +574,44 @@ following:
* - Value
- Description
* - 0x1
- - Directory preallocation (COMPAT\_DIR\_PREALLOC).
+ - Directory preallocation (COMPAT_DIR_PREALLOC).
* - 0x2
- “imagic inodes”. Not clear from the code what this does
- (COMPAT\_IMAGIC\_INODES).
+ (COMPAT_IMAGIC_INODES).
* - 0x4
- - Has a journal (COMPAT\_HAS\_JOURNAL).
+ - Has a journal (COMPAT_HAS_JOURNAL).
* - 0x8
- - Supports extended attributes (COMPAT\_EXT\_ATTR).
+ - Supports extended attributes (COMPAT_EXT_ATTR).
* - 0x10
- Has reserved GDT blocks for filesystem expansion
- (COMPAT\_RESIZE\_INODE). Requires RO\_COMPAT\_SPARSE\_SUPER.
+ (COMPAT_RESIZE_INODE). Requires RO_COMPAT_SPARSE_SUPER.
* - 0x20
- - Has directory indices (COMPAT\_DIR\_INDEX).
+ - Has directory indices (COMPAT_DIR_INDEX).
* - 0x40
- “Lazy BG”. Not in Linux kernel, seems to have been for uninitialized
- block groups? (COMPAT\_LAZY\_BG)
+ block groups? (COMPAT_LAZY_BG)
* - 0x80
- - “Exclude inode”. Not used. (COMPAT\_EXCLUDE\_INODE).
+ - “Exclude inode”. Not used. (COMPAT_EXCLUDE_INODE).
* - 0x100
- “Exclude bitmap”. Seems to be used to indicate the presence of
snapshot-related exclude bitmaps? Not defined in kernel or used in
- e2fsprogs (COMPAT\_EXCLUDE\_BITMAP).
+ e2fsprogs (COMPAT_EXCLUDE_BITMAP).
* - 0x200
- - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs
+ - Sparse Super Block, v2. If this flag is set, the SB field s_backup_bgs
points to the two block groups that contain backup superblocks
- (COMPAT\_SPARSE\_SUPER2).
+ (COMPAT_SPARSE_SUPER2).
* - 0x400
- Fast commits supported. Although fast commits blocks are
backward incompatible, fast commit blocks are not always
present in the journal. If fast commit blocks are present in
the journal, JBD2 incompat feature
- (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets
- set (COMPAT\_FAST\_COMMIT).
+ (JBD2_FEATURE_INCOMPAT_FAST_COMMIT) gets
+ set (COMPAT_FAST_COMMIT).
* - 0x1000
- Orphan file allocated. This is the special file for more efficient
tracking of unlinked but still open inodes. When there may be any
entries in the file, we additionally set proper rocompat feature
- (RO\_COMPAT\_ORPHAN\_PRESENT).
+ (RO_COMPAT_ORPHAN_PRESENT).
.. _super_incompat:
@@ -625,45 +625,45 @@ following:
* - Value
- Description
* - 0x1
- - Compression (INCOMPAT\_COMPRESSION).
+ - Compression (INCOMPAT_COMPRESSION).
* - 0x2
- - Directory entries record the file type. See ext4\_dir\_entry\_2 below
- (INCOMPAT\_FILETYPE).
+ - Directory entries record the file type. See ext4_dir_entry_2 below
+ (INCOMPAT_FILETYPE).
* - 0x4
- - Filesystem needs recovery (INCOMPAT\_RECOVER).
+ - Filesystem needs recovery (INCOMPAT_RECOVER).
* - 0x8
- - Filesystem has a separate journal device (INCOMPAT\_JOURNAL\_DEV).
+ - Filesystem has a separate journal device (INCOMPAT_JOURNAL_DEV).
* - 0x10
- Meta block groups. See the earlier discussion of this feature
- (INCOMPAT\_META\_BG).
+ (INCOMPAT_META_BG).
* - 0x40
- - Files in this filesystem use extents (INCOMPAT\_EXTENTS).
+ - Files in this filesystem use extents (INCOMPAT_EXTENTS).
* - 0x80
- - Enable a filesystem size of 2^64 blocks (INCOMPAT\_64BIT).
+ - Enable a filesystem size of 2^64 blocks (INCOMPAT_64BIT).
* - 0x100
- - Multiple mount protection (INCOMPAT\_MMP).
+ - Multiple mount protection (INCOMPAT_MMP).
* - 0x200
- Flexible block groups. See the earlier discussion of this feature
- (INCOMPAT\_FLEX\_BG).
+ (INCOMPAT_FLEX_BG).
* - 0x400
- Inodes can be used to store large extended attribute values
- (INCOMPAT\_EA\_INODE).
+ (INCOMPAT_EA_INODE).
* - 0x1000
- - Data in directory entry (INCOMPAT\_DIRDATA). (Not implemented?)
+ - Data in directory entry (INCOMPAT_DIRDATA). (Not implemented?)
* - 0x2000
- Metadata checksum seed is stored in the superblock. This feature enables
- the administrator to change the UUID of a metadata\_csum filesystem
+ the administrator to change the UUID of a metadata_csum filesystem
while the filesystem is mounted; without it, the checksum definition
- requires all metadata blocks to be rewritten (INCOMPAT\_CSUM\_SEED).
+ requires all metadata blocks to be rewritten (INCOMPAT_CSUM_SEED).
* - 0x4000
- - Large directory >2GB or 3-level htree (INCOMPAT\_LARGEDIR). Prior to
+ - Large directory >2GB or 3-level htree (INCOMPAT_LARGEDIR). Prior to
this feature, directories could not be larger than 4GiB and could not
have an htree more than 2 levels deep. If this feature is enabled,
directories can be larger than 4GiB and have a maximum htree depth of 3.
* - 0x8000
- - Data in inode (INCOMPAT\_INLINE\_DATA).
+ - Data in inode (INCOMPAT_INLINE_DATA).
* - 0x10000
- - Encrypted inodes are present on the filesystem. (INCOMPAT\_ENCRYPT).
+ - Encrypted inodes are present on the filesystem. (INCOMPAT_ENCRYPT).
.. _super_rocompat:
@@ -678,54 +678,54 @@ the following:
- Description
* - 0x1
- Sparse superblocks. See the earlier discussion of this feature
- (RO\_COMPAT\_SPARSE\_SUPER).
+ (RO_COMPAT_SPARSE_SUPER).
* - 0x2
- This filesystem has been used to store a file greater than 2GiB
- (RO\_COMPAT\_LARGE\_FILE).
+ (RO_COMPAT_LARGE_FILE).
* - 0x4
- - Not used in kernel or e2fsprogs (RO\_COMPAT\_BTREE\_DIR).
+ - Not used in kernel or e2fsprogs (RO_COMPAT_BTREE_DIR).
* - 0x8
- This filesystem has files whose sizes are represented in units of
logical blocks, not 512-byte sectors. This implies a very large file
- indeed! (RO\_COMPAT\_HUGE\_FILE)
+ indeed! (RO_COMPAT_HUGE_FILE)
* - 0x10
- Group descriptors have checksums. In addition to detecting corruption,
this is useful for lazy formatting with uninitialized groups
- (RO\_COMPAT\_GDT\_CSUM).
+ (RO_COMPAT_GDT_CSUM).
* - 0x20
- Indicates that the old ext3 32,000 subdirectory limit no longer applies
- (RO\_COMPAT\_DIR\_NLINK). A directory's i\_links\_count will be set to 1
+ (RO_COMPAT_DIR_NLINK). A directory's i_links_count will be set to 1
if it is incremented past 64,999.
* - 0x40
- Indicates that large inodes exist on this filesystem
- (RO\_COMPAT\_EXTRA\_ISIZE).
+ (RO_COMPAT_EXTRA_ISIZE).
* - 0x80
- - This filesystem has a snapshot (RO\_COMPAT\_HAS\_SNAPSHOT).
+ - This filesystem has a snapshot (RO_COMPAT_HAS_SNAPSHOT).
* - 0x100
- - `Quota <Quota>`__ (RO\_COMPAT\_QUOTA).
+ - `Quota <Quota>`__ (RO_COMPAT_QUOTA).
* - 0x200
- This filesystem supports “bigalloc”, which means that file extents are
tracked in units of clusters (of blocks) instead of blocks
- (RO\_COMPAT\_BIGALLOC).
+ (RO_COMPAT_BIGALLOC).
* - 0x400
- This filesystem supports metadata checksumming.
- (RO\_COMPAT\_METADATA\_CSUM; implies RO\_COMPAT\_GDT\_CSUM, though
- GDT\_CSUM must not be set)
+ (RO_COMPAT_METADATA_CSUM; implies RO_COMPAT_GDT_CSUM, though
+ GDT_CSUM must not be set)
* - 0x800
- Filesystem supports replicas. This feature is neither in the kernel nor
- e2fsprogs. (RO\_COMPAT\_REPLICA)
+ e2fsprogs. (RO_COMPAT_REPLICA)
* - 0x1000
- Read-only filesystem image; the kernel will not mount this image
read-write and most tools will refuse to write to the image.
- (RO\_COMPAT\_READONLY)
+ (RO_COMPAT_READONLY)
* - 0x2000
- - Filesystem tracks project quotas. (RO\_COMPAT\_PROJECT)
+ - Filesystem tracks project quotas. (RO_COMPAT_PROJECT)
* - 0x8000
- - Verity inodes may be present on the filesystem. (RO\_COMPAT\_VERITY)
+ - Verity inodes may be present on the filesystem. (RO_COMPAT_VERITY)
* - 0x10000
- Indicates orphan file may have valid orphan entries and thus we need
to clean them up when mounting the filesystem
- (RO\_COMPAT\_ORPHAN\_PRESENT).
+ (RO_COMPAT_ORPHAN_PRESENT).
.. _super_def_hash:
@@ -761,36 +761,36 @@ The ``s_default_mount_opts`` field is any combination of the following:
* - Value
- Description
* - 0x0001
- - Print debugging info upon (re)mount. (EXT4\_DEFM\_DEBUG)
+ - Print debugging info upon (re)mount. (EXT4_DEFM_DEBUG)
* - 0x0002
- New files take the gid of the containing directory (instead of the fsgid
- of the current process). (EXT4\_DEFM\_BSDGROUPS)
+ of the current process). (EXT4_DEFM_BSDGROUPS)
* - 0x0004
- - Support userspace-provided extended attributes. (EXT4\_DEFM\_XATTR\_USER)
+ - Support userspace-provided extended attributes. (EXT4_DEFM_XATTR_USER)
* - 0x0008
- - Support POSIX access control lists (ACLs). (EXT4\_DEFM\_ACL)
+ - Support POSIX access control lists (ACLs). (EXT4_DEFM_ACL)
* - 0x0010
- - Do not support 32-bit UIDs. (EXT4\_DEFM\_UID16)
+ - Do not support 32-bit UIDs. (EXT4_DEFM_UID16)
* - 0x0020
- All data and metadata are commited to the journal.
- (EXT4\_DEFM\_JMODE\_DATA)
+ (EXT4_DEFM_JMODE_DATA)
* - 0x0040
- All data are flushed to the disk before metadata are committed to the
- journal. (EXT4\_DEFM\_JMODE\_ORDERED)
+ journal. (EXT4_DEFM_JMODE_ORDERED)
* - 0x0060
- Data ordering is not preserved; data may be written after the metadata
- has been written. (EXT4\_DEFM\_JMODE\_WBACK)
+ has been written. (EXT4_DEFM_JMODE_WBACK)
* - 0x0100
- - Disable write flushes. (EXT4\_DEFM\_NOBARRIER)
+ - Disable write flushes. (EXT4_DEFM_NOBARRIER)
* - 0x0200
- Track which blocks in a filesystem are metadata and therefore should not
be used as data blocks. This option will be enabled by default on 3.18,
- hopefully. (EXT4\_DEFM\_BLOCK\_VALIDITY)
+ hopefully. (EXT4_DEFM_BLOCK_VALIDITY)
* - 0x0400
- Enable DISCARD support, where the storage device is told about blocks
- becoming unused. (EXT4\_DEFM\_DISCARD)
+ becoming unused. (EXT4_DEFM_DISCARD)
* - 0x0800
- - Disable delayed allocation. (EXT4\_DEFM\_NODELALLOC)
+ - Disable delayed allocation. (EXT4_DEFM_NODELALLOC)
.. _super_flags:
@@ -820,12 +820,12 @@ The ``s_encrypt_algos`` list can contain any of the following:
* - Value
- Description
* - 0
- - Invalid algorithm (ENCRYPTION\_MODE\_INVALID).
+ - Invalid algorithm (ENCRYPTION_MODE_INVALID).
* - 1
- - 256-bit AES in XTS mode (ENCRYPTION\_MODE\_AES\_256\_XTS).
+ - 256-bit AES in XTS mode (ENCRYPTION_MODE_AES_256_XTS).
* - 2
- - 256-bit AES in GCM mode (ENCRYPTION\_MODE\_AES\_256\_GCM).
+ - 256-bit AES in GCM mode (ENCRYPTION_MODE_AES_256_GCM).
* - 3
- - 256-bit AES in CBC mode (ENCRYPTION\_MODE\_AES\_256\_CBC).
+ - 256-bit AES in CBC mode (ENCRYPTION_MODE_AES_256_CBC).
Total size of the superblock is 1024 bytes.
diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst
index a80a59941d2f..4d19b19bcc08 100644
--- a/Documentation/filesystems/netfs_library.rst
+++ b/Documentation/filesystems/netfs_library.rst
@@ -37,30 +37,31 @@ The network filesystem helper library needs a place to store a bit of state for
its use on each netfs inode it is helping to manage. To this end, a context
structure is defined::
- struct netfs_i_context {
+ struct netfs_inode {
+ struct inode inode;
const struct netfs_request_ops *ops;
- struct fscache_cookie *cache;
+ struct fscache_cookie *cache;
};
-A network filesystem that wants to use netfs lib must place one of these
-directly after the VFS ``struct inode`` it allocates, usually as part of its
-own struct. This can be done in a way similar to the following::
+A network filesystem that wants to use netfs lib must place one of these in its
+inode wrapper struct instead of the VFS ``struct inode``. This can be done in
+a way similar to the following::
struct my_inode {
- struct {
- /* These must be contiguous */
- struct inode vfs_inode;
- struct netfs_i_context netfs_ctx;
- };
+ struct netfs_inode netfs; /* Netfslib context and vfs inode */
...
};
-This allows netfslib to find its state by simple offset from the inode pointer,
-thereby allowing the netfslib helper functions to be pointed to directly by the
-VFS/VM operation tables.
+This allows netfslib to find its state by using ``container_of()`` from the
+inode pointer, thereby allowing the netfslib helper functions to be pointed to
+directly by the VFS/VM operation tables.
The structure contains the following fields:
+ * ``inode``
+
+ The VFS inode structure.
+
* ``ops``
The set of operations provided by the network filesystem to netfslib.
@@ -78,19 +79,17 @@ To help deal with the per-inode context, a number helper functions are
provided. Firstly, a function to perform basic initialisation on a context and
set the operations table pointer::
- void netfs_i_context_init(struct inode *inode,
- const struct netfs_request_ops *ops);
+ void netfs_inode_init(struct netfs_inode *ctx,
+ const struct netfs_request_ops *ops);
-then two functions to cast between the VFS inode structure and the netfs
-context::
+then a function to cast from the VFS inode structure to the netfs context::
- struct netfs_i_context *netfs_i_context(struct inode *inode);
- struct inode *netfs_inode(struct netfs_i_context *ctx);
+ struct netfs_inode *netfs_node(struct inode *inode);
and finally, a function to get the cache cookie pointer from the context
attached to an inode (or NULL if fscache is disabled)::
- struct fscache_cookie *netfs_i_cookie(struct inode *inode);
+ struct fscache_cookie *netfs_i_cookie(struct netfs_inode *ctx);
Buffered Read Helpers
@@ -137,8 +136,9 @@ Three read helpers are provided::
void netfs_readahead(struct readahead_control *ractl);
int netfs_read_folio(struct file *file,
- struct folio *folio);
- int netfs_write_begin(struct file *file,
+ struct folio *folio);
+ int netfs_write_begin(struct netfs_inode *ctx,
+ struct file *file,
struct address_space *mapping,
loff_t pos,
unsigned int len,
@@ -158,9 +158,10 @@ The helpers manage the read request, calling back into the network filesystem
through the suppplied table of operations. Waits will be performed as
necessary before returning for helpers that are meant to be synchronous.
-If an error occurs and netfs_priv is non-NULL, ops->cleanup() will be called to
-deal with it. If some parts of the request are in progress when an error
-occurs, the request will get partially completed if sufficient data is read.
+If an error occurs, the ->free_request() will be called to clean up the
+netfs_io_request struct allocated. If some parts of the request are in
+progress when an error occurs, the request will get partially completed if
+sufficient data is read.
Additionally, there is::
@@ -208,8 +209,7 @@ The above fields are the ones the netfs can use. They are:
* ``netfs_priv``
The network filesystem's private data. The value for this can be passed in
- to the helper functions or set during the request. The ->cleanup() op will
- be called if this is non-NULL at the end.
+ to the helper functions or set during the request.
* ``start``
* ``len``
@@ -294,6 +294,7 @@ through which it can issue requests and negotiate::
struct netfs_request_ops {
void (*init_request)(struct netfs_io_request *rreq, struct file *file);
+ void (*free_request)(struct netfs_io_request *rreq);
int (*begin_cache_operation)(struct netfs_io_request *rreq);
void (*expand_readahead)(struct netfs_io_request *rreq);
bool (*clamp_length)(struct netfs_io_subrequest *subreq);
@@ -302,7 +303,6 @@ through which it can issue requests and negotiate::
int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
struct folio *folio, void **_fsdata);
void (*done)(struct netfs_io_request *rreq);
- void (*cleanup)(struct address_space *mapping, void *netfs_priv);
};
The operations are as follows:
@@ -310,7 +310,12 @@ The operations are as follows:
* ``init_request()``
[Optional] This is called to initialise the request structure. It is given
- the file for reference and can modify the ->netfs_priv value.
+ the file for reference.
+
+ * ``free_request()``
+
+ [Optional] This is called as the request is being deallocated so that the
+ filesystem can clean up any state it has attached there.
* ``begin_cache_operation()``
@@ -384,11 +389,6 @@ The operations are as follows:
[Optional] This is called after the folios in the request have all been
unlocked (and marked uptodate if applicable).
- * ``cleanup``
-
- [Optional] This is called as the request is being deallocated so that the
- filesystem can clean up ->netfs_priv.
-
Read Helper Procedure
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 8f9be0e658b4..67036a05b771 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -137,7 +137,6 @@ needed).
scheduler/index
mhi/index
peci/index
- hte/index
Architecture-agnostic documentation
-----------------------------------
diff --git a/Documentation/loongarch/introduction.rst b/Documentation/loongarch/introduction.rst
index 2bf40ad370df..216b3f390e80 100644
--- a/Documentation/loongarch/introduction.rst
+++ b/Documentation/loongarch/introduction.rst
@@ -45,10 +45,12 @@ Name Alias Usage Preserved
``$r23``-``$r31`` ``$s0``-``$s8`` Static registers Yes
================= =============== =================== ============
-Note: The register ``$r21`` is reserved in the ELF psABI, but used by the Linux
-kernel for storing the percpu base address. It normally has no ABI name, but is
-called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1`` in some old code,
-however they are deprecated aliases of ``$a0`` and ``$a1`` respectively.
+.. Note::
+ The register ``$r21`` is reserved in the ELF psABI, but used by the Linux
+ kernel for storing the percpu base address. It normally has no ABI name,
+ but is called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1``
+ in some old code,however they are deprecated aliases of ``$a0`` and ``$a1``
+ respectively.
FPRs
----
@@ -69,8 +71,9 @@ Name Alias Usage Preserved
``$f24``-``$f31`` ``$fs0``-``$fs7`` Static registers Yes
================= ================== =================== ============
-Note: You may see ``$fv0`` or ``$fv1`` in some old code, however they are deprecated
-aliases of ``$fa0`` and ``$fa1`` respectively.
+.. Note::
+ You may see ``$fv0`` or ``$fv1`` in some old code, however they are
+ deprecated aliases of ``$fa0`` and ``$fa1`` respectively.
VRs
----
diff --git a/Documentation/loongarch/irq-chip-model.rst b/Documentation/loongarch/irq-chip-model.rst
index 8d88f7ab2e5e..7988f4192363 100644
--- a/Documentation/loongarch/irq-chip-model.rst
+++ b/Documentation/loongarch/irq-chip-model.rst
@@ -145,12 +145,16 @@ Documentation of Loongson's LS7A chipset:
https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (in English)
-Note: CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described
-in Section 7.4 of "LoongArch Reference Manual, Vol 1"; LIOINTC is "Legacy I/O
-Interrupts" described in Section 11.1 of "Loongson 3A5000 Processor Reference
-Manual"; EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of
-"Loongson 3A5000 Processor Reference Manual"; HTVECINTC is "HyperTransport
-Interrupts" described in Section 14.3 of "Loongson 3A5000 Processor Reference
-Manual"; PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of
-"Loongson 7A1000 Bridge User Manual"; PCH-LPC is "LPC Interrupts" described in
-Section 24.3 of "Loongson 7A1000 Bridge User Manual".
+.. Note::
+ - CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described
+ in Section 7.4 of "LoongArch Reference Manual, Vol 1";
+ - LIOINTC is "Legacy I/OInterrupts" described in Section 11.1 of
+ "Loongson 3A5000 Processor Reference Manual";
+ - EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of
+ "Loongson 3A5000 Processor Reference Manual";
+ - HTVECINTC is "HyperTransport Interrupts" described in Section 14.3 of
+ "Loongson 3A5000 Processor Reference Manual";
+ - PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of
+ "Loongson 7A1000 Bridge User Manual";
+ - PCH-LPC is "LPC Interrupts" described in Section 24.3 of
+ "Loongson 7A1000 Bridge User Manual".
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 04216564a03c..9f41961d11d5 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -2925,6 +2925,43 @@ plpmtud_probe_interval - INTEGER
Default: 0
+reconf_enable - BOOLEAN
+ Enable or disable extension of Stream Reconfiguration functionality
+ specified in RFC6525. This extension provides the ability to "reset"
+ a stream, and it includes the Parameters of "Outgoing/Incoming SSN
+ Reset", "SSN/TSN Reset" and "Add Outgoing/Incoming Streams".
+
+ - 1: Enable extension.
+ - 0: Disable extension.
+
+ Default: 0
+
+intl_enable - BOOLEAN
+ Enable or disable extension of User Message Interleaving functionality
+ specified in RFC8260. This extension allows the interleaving of user
+ messages sent on different streams. With this feature enabled, I-DATA
+ chunk will replace DATA chunk to carry user messages if also supported
+ by the peer. Note that to use this feature, one needs to set this option
+ to 1 and also needs to set socket options SCTP_FRAGMENT_INTERLEAVE to 2
+ and SCTP_INTERLEAVING_SUPPORTED to 1.
+
+ - 1: Enable extension.
+ - 0: Disable extension.
+
+ Default: 0
+
+ecn_enable - BOOLEAN
+ Control use of Explicit Congestion Notification (ECN) by SCTP.
+ Like in TCP, ECN is used only when both ends of the SCTP connection
+ indicate support for it. This feature is useful in avoiding losses
+ due to congestion by allowing supporting routers to signal congestion
+ before having to drop packets.
+
+ 1: Enable ecn.
+ 0: Disable ecn.
+
+ Default: 1
+
``/proc/sys/net/core/*``
========================
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index d43da709bf40..704f31da5167 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -104,7 +104,7 @@ Whenever possible, use the PHY side RGMII delay for these reasons:
* PHY device drivers in PHYLIB being reusable by nature, being able to
configure correctly a specified delay enables more designs with similar delay
- requirements to be operate correctly
+ requirements to be operated correctly
For cases where the PHY is not capable of providing this delay, but the
Ethernet MAC driver is capable of doing so, the correct phy_interface_t value
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index 34415ae1af1b..19c286c23786 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -32,6 +32,7 @@ you probably needn't concern yourself with pcmciautils.
GNU C 5.1 gcc --version
Clang/LLVM (optional) 11.0.0 clang --version
GNU make 3.81 make --version
+bash 4.2 bash --version
binutils 2.23 ld -v
flex 2.5.35 flex --version
bison 2.0 bison --version
@@ -84,6 +85,12 @@ Make
You will need GNU make 3.81 or later to build the kernel.
+Bash
+----
+
+Some bash scripts are used for the kernel build.
+Bash 4.2 or newer is needed.
+
Binutils
--------
@@ -362,6 +369,11 @@ Make
- <ftp://ftp.gnu.org/gnu/make/>
+Bash
+----
+
+- <ftp://ftp.gnu.org/gnu/bash/>
+
Binutils
--------
diff --git a/Documentation/translations/zh_CN/loongarch/introduction.rst b/Documentation/translations/zh_CN/loongarch/introduction.rst
index e31a1a928c48..11686ee0caeb 100644
--- a/Documentation/translations/zh_CN/loongarch/introduction.rst
+++ b/Documentation/translations/zh_CN/loongarch/introduction.rst
@@ -46,10 +46,11 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0,而其
``$r23``-``$r31`` ``$s0``-``$s8`` 静态寄存器 是
================= =============== =================== ==========
-注意:``$r21``寄存器在ELF psABI中保留未使用,但是在Linux内核用于保存每CPU
-变量基地址。该寄存器没有ABI命名,不过在内核中称为``$u0``。在一些遗留代码
-中有时可能见到``$v0``和``$v1``,它们是``$a0``和``$a1``的别名,属于已经废弃
-的用法。
+.. note::
+ 注意: ``$r21`` 寄存器在ELF psABI中保留未使用,但是在Linux内核用于保
+ 存每CPU变量基地址。该寄存器没有ABI命名,不过在内核中称为 ``$u0`` 。在
+ 一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ,它们是 ``$a0`` 和
+ ``$a1`` 的别名,属于已经废弃的用法。
浮点寄存器
----------
@@ -68,8 +69,9 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0,而其
``$f24``-``$f31`` ``$fs0``-``$fs7`` 静态寄存器 是
================= ================== =================== ==========
-注意:在一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ,它们是 ``$a0``
-和 ``$a1`` 的别名,属于已经废弃的用法。
+.. note::
+ 注意:在一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ,它们是
+ ``$a0`` 和 ``$a1`` 的别名,属于已经废弃的用法。
向量寄存器
diff --git a/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst b/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst
index 2a4c3ad38be4..fb5d23b49ed5 100644
--- a/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst
+++ b/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst
@@ -147,9 +147,11 @@ PCH-LPC::
https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (英文版)
-注:CPUINTC即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其中断
-控制逻辑;LIOINTC即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”;EIOINTC
-即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”;HTVECINTC即《龙芯3A5000
-处理器使用手册》第14.3节所描述的“HyperTransport中断”;PCH-PIC/PCH-MSI即《龙芯7A1000桥
-片用户手册》第5章所描述的“中断控制器”;PCH-LPC即《龙芯7A1000桥片用户手册》第24.3节所
-描述的“LPC中断”。
+.. note::
+ - CPUINTC:即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其
+ 中断控制逻辑;
+ - LIOINTC:即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”;
+ - EIOINTC:即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”;
+ - HTVECINTC:即《龙芯3A5000处理器使用手册》第14.3节所描述的“HyperTransport中断”;
+ - PCH-PIC/PCH-MSI:即《龙芯7A1000桥片用户手册》第5章所描述的“中断控制器”;
+ - PCH-LPC:即《龙芯7A1000桥片用户手册》第24.3节所描述的“LPC中断”。
diff --git a/Documentation/usb/usbmon.rst b/Documentation/usb/usbmon.rst
index b0bd51080799..6d5ec1e62d09 100644
--- a/Documentation/usb/usbmon.rst
+++ b/Documentation/usb/usbmon.rst
@@ -42,7 +42,7 @@ if usbmon is built into the kernel::
# modprobe usbmon
#
-Verify that bus sockets are present:
+Verify that bus sockets are present::
# ls /sys/kernel/debug/usb/usbmon
0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
diff --git a/MAINTAINERS b/MAINTAINERS
index a6d3bd9d2a8d..cb5aaeb84ac4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -427,6 +427,7 @@ ACPI VIOT DRIVER
M: Jean-Philippe Brucker <jean-philippe@linaro.org>
L: linux-acpi@vger.kernel.org
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
F: drivers/acpi/viot.c
F: include/linux/acpi_viot.h
@@ -960,6 +961,7 @@ AMD IOMMU (AMD-VI)
M: Joerg Roedel <joro@8bytes.org>
R: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/amd/
@@ -1507,7 +1509,7 @@ F: drivers/clocksource/arm_arch_timer.c
ARM HDLCD DRM DRIVER
M: Liviu Dudau <liviu.dudau@arm.com>
S: Supported
-F: Documentation/devicetree/bindings/display/arm,hdlcd.txt
+F: Documentation/devicetree/bindings/display/arm,hdlcd.yaml
F: drivers/gpu/drm/arm/hdlcd_*
ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
@@ -1542,7 +1544,7 @@ M: Mihail Atanassov <mihail.atanassov@arm.com>
L: Mali DP Maintainers <malidp@foss.arm.com>
S: Supported
T: git git://anongit.freedesktop.org/drm/drm-misc
-F: Documentation/devicetree/bindings/display/arm,komeda.txt
+F: Documentation/devicetree/bindings/display/arm,komeda.yaml
F: Documentation/gpu/komeda-kms.rst
F: drivers/gpu/drm/arm/display/include/
F: drivers/gpu/drm/arm/display/komeda/
@@ -1564,7 +1566,7 @@ M: Brian Starkey <brian.starkey@arm.com>
L: Mali DP Maintainers <malidp@foss.arm.com>
S: Supported
T: git git://anongit.freedesktop.org/drm/drm-misc
-F: Documentation/devicetree/bindings/display/arm,malidp.txt
+F: Documentation/devicetree/bindings/display/arm,malidp.yaml
F: Documentation/gpu/afbc.rst
F: drivers/gpu/drm/arm/
@@ -2009,7 +2011,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/ulli-kroll/linux.git
F: Documentation/devicetree/bindings/arm/gemini.yaml
-F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
+F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
F: arch/arm/boot/dts/gemini*
@@ -3662,7 +3664,7 @@ BPF JIT for ARM
M: Shubham Bansal <illusionist.neo@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
-S: Maintained
+S: Odd Fixes
F: arch/arm/net/
BPF JIT for ARM64
@@ -3686,14 +3688,15 @@ BPF JIT for NFP NICs
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
-S: Supported
+S: Odd Fixes
F: drivers/net/ethernet/netronome/nfp/bpf/
BPF JIT for POWERPC (32-BIT AND 64-BIT)
M: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
+M: Michael Ellerman <mpe@ellerman.id.au>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
-S: Maintained
+S: Supported
F: arch/powerpc/net/
BPF JIT for RISC-V (32-bit)
@@ -3719,7 +3722,7 @@ M: Heiko Carstens <hca@linux.ibm.com>
M: Vasily Gorbik <gor@linux.ibm.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
-S: Maintained
+S: Supported
F: arch/s390/net/
X: arch/s390/net/pnet.c
@@ -3727,14 +3730,14 @@ BPF JIT for SPARC (32-BIT AND 64-BIT)
M: David S. Miller <davem@davemloft.net>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
-S: Maintained
+S: Odd Fixes
F: arch/sparc/net/
BPF JIT for X86 32-BIT
M: Wang YanQing <udknight@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
-S: Maintained
+S: Odd Fixes
F: arch/x86/net/bpf_jit_comp32.c
BPF JIT for X86 64-BIT
@@ -3757,6 +3760,26 @@ F: include/linux/bpf_lsm.h
F: kernel/bpf/bpf_lsm.c
F: security/bpf/
+BPF L7 FRAMEWORK
+M: John Fastabend <john.fastabend@gmail.com>
+M: Jakub Sitnicki <jakub@cloudflare.com>
+L: netdev@vger.kernel.org
+L: bpf@vger.kernel.org
+S: Maintained
+F: include/linux/skmsg.h
+F: net/core/skmsg.c
+F: net/core/sock_map.c
+F: net/ipv4/tcp_bpf.c
+F: net/ipv4/udp_bpf.c
+F: net/unix/unix_bpf.c
+
+BPFTOOL
+M: Quentin Monnet <quentin@isovalent.com>
+L: bpf@vger.kernel.org
+S: Maintained
+F: kernel/bpf/disasm.*
+F: tools/bpf/bpftool/
+
BROADCOM B44 10/100 ETHERNET DRIVER
M: Michael Chan <michael.chan@broadcom.com>
L: netdev@vger.kernel.org
@@ -5955,6 +5978,7 @@ M: Christoph Hellwig <hch@lst.de>
M: Marek Szyprowski <m.szyprowski@samsung.com>
R: Robin Murphy <robin.murphy@arm.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
T: git git://git.infradead.org/users/hch/dma-mapping.git
@@ -5967,6 +5991,7 @@ F: kernel/dma/
DMA MAPPING BENCHMARK
M: Xiang Chen <chenxiang66@hisilicon.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
F: kernel/dma/map_benchmark.c
F: tools/testing/selftests/dma/
@@ -6078,7 +6103,7 @@ M: Sakari Ailus <sakari.ailus@linux.intel.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
+F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
F: drivers/media/i2c/dw9807-vcm.c
DOUBLETALK DRIVER
@@ -7551,6 +7576,7 @@ F: drivers/gpu/drm/exynos/exynos_dp*
EXYNOS SYSMMU (IOMMU) driver
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
F: drivers/iommu/exynos-iommu.c
@@ -7647,6 +7673,7 @@ F: include/uapi/scsi/fc/
FILE LOCKING (flock() and fcntl()/lockf())
M: Jeff Layton <jlayton@kernel.org>
+M: Chuck Lever <chuck.lever@oracle.com>
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: fs/fcntl.c
@@ -8471,6 +8498,7 @@ F: Documentation/devicetree/bindings/gpio/
F: Documentation/driver-api/gpio/
F: drivers/gpio/
F: include/asm-generic/gpio.h
+F: include/dt-bindings/gpio/
F: include/linux/gpio.h
F: include/linux/gpio/
F: include/linux/of_gpio.h
@@ -9081,7 +9109,7 @@ HTE SUBSYSTEM
M: Dipen Patel <dipenp@nvidia.com>
S: Maintained
F: Documentation/devicetree/bindings/timestamp/
-F: Documentation/hte/
+F: Documentation/driver-api/hte/
F: drivers/hte/
F: include/linux/hte.h
@@ -9268,6 +9296,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
F: Documentation/devicetree/bindings/i2c/i2c.txt
F: Documentation/i2c/
F: drivers/i2c/*
+F: include/dt-bindings/i2c/i2c.h
F: include/linux/i2c-dev.h
F: include/linux/i2c-smbus.h
F: include/linux/i2c.h
@@ -9283,6 +9312,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
F: Documentation/devicetree/bindings/i2c/
F: drivers/i2c/algos/
F: drivers/i2c/busses/
+F: include/dt-bindings/i2c/
I2C-TAOS-EVM DRIVER
M: Jean Delvare <jdelvare@suse.com>
@@ -9967,6 +9997,7 @@ INTEL IOMMU (VT-d)
M: David Woodhouse <dwmw2@infradead.org>
M: Lu Baolu <baolu.lu@linux.intel.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/intel/
@@ -10346,6 +10377,7 @@ IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
M: Will Deacon <will@kernel.org>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: Documentation/devicetree/bindings/iommu/
@@ -10739,6 +10771,7 @@ W: http://kernelnewbies.org/KernelJanitors
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
M: Chuck Lever <chuck.lever@oracle.com>
+M: Jeff Layton <jlayton@kernel.org>
L: linux-nfs@vger.kernel.org
S: Supported
W: http://nfs.sourceforge.net/
@@ -10821,6 +10854,7 @@ M: Marc Zyngier <maz@kernel.org>
R: James Morse <james.morse@arm.com>
R: Alexandru Elisei <alexandru.elisei@arm.com>
R: Suzuki K Poulose <suzuki.poulose@arm.com>
+R: Oliver Upton <oliver.upton@linux.dev>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu (moderated for non-subscribers)
S: Maintained
@@ -10863,7 +10897,6 @@ F: arch/riscv/include/asm/kvm*
F: arch/riscv/include/uapi/asm/kvm*
F: arch/riscv/kvm/
F: tools/testing/selftests/kvm/*/riscv/
-F: tools/testing/selftests/kvm/riscv/
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
M: Christian Borntraeger <borntraeger@linux.ibm.com>
@@ -10888,28 +10921,51 @@ F: tools/testing/selftests/kvm/*/s390x/
F: tools/testing/selftests/kvm/s390x/
KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)
+M: Sean Christopherson <seanjc@google.com>
M: Paolo Bonzini <pbonzini@redhat.com>
-R: Sean Christopherson <seanjc@google.com>
-R: Vitaly Kuznetsov <vkuznets@redhat.com>
-R: Wanpeng Li <wanpengli@tencent.com>
-R: Jim Mattson <jmattson@google.com>
-R: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
S: Supported
-W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
F: arch/x86/include/asm/kvm*
-F: arch/x86/include/asm/pvclock-abi.h
F: arch/x86/include/asm/svm.h
F: arch/x86/include/asm/vmx*.h
F: arch/x86/include/uapi/asm/kvm*
F: arch/x86/include/uapi/asm/svm.h
F: arch/x86/include/uapi/asm/vmx.h
-F: arch/x86/kernel/kvm.c
-F: arch/x86/kernel/kvmclock.c
F: arch/x86/kvm/
F: arch/x86/kvm/*/
+KVM PARAVIRT (KVM/paravirt)
+M: Paolo Bonzini <pbonzini@redhat.com>
+R: Wanpeng Li <wanpengli@tencent.com>
+R: Vitaly Kuznetsov <vkuznets@redhat.com>
+L: kvm@vger.kernel.org
+S: Supported
+T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
+F: arch/x86/kernel/kvm.c
+F: arch/x86/kernel/kvmclock.c
+F: arch/x86/include/asm/pvclock-abi.h
+F: include/linux/kvm_para.h
+F: include/uapi/linux/kvm_para.h
+F: include/uapi/asm-generic/kvm_para.h
+F: include/asm-generic/kvm_para.h
+F: arch/um/include/asm/kvm_para.h
+F: arch/x86/include/asm/kvm_para.h
+F: arch/x86/include/uapi/asm/kvm_para.h
+
+KVM X86 HYPER-V (KVM/hyper-v)
+M: Vitaly Kuznetsov <vkuznets@redhat.com>
+M: Sean Christopherson <seanjc@google.com>
+M: Paolo Bonzini <pbonzini@redhat.com>
+L: kvm@vger.kernel.org
+S: Supported
+T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
+F: arch/x86/kvm/hyperv.*
+F: arch/x86/kvm/kvm_onhyperv.*
+F: arch/x86/kvm/svm/hyperv.*
+F: arch/x86/kvm/svm/svm_onhyperv.*
+F: arch/x86/kvm/vmx/evmcs.*
+
KERNFS
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M: Tejun Heo <tj@kernel.org>
@@ -11088,20 +11144,6 @@ S: Maintained
F: include/net/l3mdev.h
F: net/l3mdev
-L7 BPF FRAMEWORK
-M: John Fastabend <john.fastabend@gmail.com>
-M: Daniel Borkmann <daniel@iogearbox.net>
-M: Jakub Sitnicki <jakub@cloudflare.com>
-L: netdev@vger.kernel.org
-L: bpf@vger.kernel.org
-S: Maintained
-F: include/linux/skmsg.h
-F: net/core/skmsg.c
-F: net/core/sock_map.c
-F: net/ipv4/tcp_bpf.c
-F: net/ipv4/udp_bpf.c
-F: net/unix/unix_bpf.c
-
LANDLOCK SECURITY MODULE
M: Mickaël Salaün <mic@digikod.net>
L: linux-security-module@vger.kernel.org
@@ -11257,6 +11299,7 @@ M: Damien Le Moal <damien.lemoal@opensource.wdc.com>
L: linux-ide@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git
+F: Documentation/ABI/testing/sysfs-ata
F: Documentation/devicetree/bindings/ata/
F: drivers/ata/
F: include/linux/ata.h
@@ -12493,6 +12536,7 @@ F: drivers/i2c/busses/i2c-mt65xx.c
MEDIATEK IOMMU DRIVER
M: Yong Wu <yong.wu@mediatek.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/iommu/mediatek*
@@ -12696,7 +12740,6 @@ L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
Q: https://patchwork.kernel.org/project/netdevbpf/list/
-F: drivers/net/ethernet/mellanox/mlx5/core/accel/*
F: drivers/net/ethernet/mellanox/mlx5/core/en_accel/*
F: drivers/net/ethernet/mellanox/mlx5/core/fpga/*
F: include/linux/mlx5/mlx5_ifc_fpga.h
@@ -13792,6 +13835,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
F: Documentation/devicetree/bindings/net/
F: drivers/connector/
F: drivers/net/
+F: include/dt-bindings/net/
F: include/linux/etherdevice.h
F: include/linux/fcdevice.h
F: include/linux/fddidevice.h
@@ -13943,7 +13987,6 @@ F: net/ipv6/tcp*.c
NETWORKING [TLS]
M: Boris Pismenny <borisp@nvidia.com>
M: John Fastabend <john.fastabend@gmail.com>
-M: Daniel Borkmann <daniel@iogearbox.net>
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
S: Maintained
@@ -14860,6 +14903,7 @@ F: include/dt-bindings/
OPENCOMPUTE PTP CLOCK DRIVER
M: Jonathan Lemon <jonathan.lemon@gmail.com>
+M: Vadim Fedorenko <vadfed@fb.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/ptp/ptp_ocp.c
@@ -15824,6 +15868,14 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
F: drivers/iio/chemical/pms7003.c
+PLATFORM FEATURE INFRASTRUCTURE
+M: Juergen Gross <jgross@suse.com>
+S: Maintained
+F: arch/*/include/asm/platform-feature.h
+F: include/asm-generic/platform-feature.h
+F: include/linux/platform-feature.h
+F: kernel/platform-feature.c
+
PLDMFW LIBRARY
M: Jacob Keller <jacob.e.keller@intel.com>
S: Maintained
@@ -16526,6 +16578,7 @@ F: drivers/i2c/busses/i2c-qcom-cci.c
QUALCOMM IOMMU
M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -19151,6 +19204,7 @@ F: arch/x86/boot/video*
SWIOTLB SUBSYSTEM
M: Christoph Hellwig <hch@infradead.org>
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
T: git git://git.infradead.org/users/hch/dma-mapping.git
@@ -19220,7 +19274,7 @@ F: arch/arc/plat-axs10x
SYNOPSYS AXS10x RESET CONTROLLER DRIVER
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Supported
-F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
F: drivers/reset/reset-axs10x.c
SYNOPSYS CREG GPIO DRIVER
@@ -19288,7 +19342,7 @@ R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
R: Mika Westerberg <mika.westerberg@linux.intel.com>
R: Jan Dabros <jsd@semihalf.com>
L: linux-i2c@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/i2c/busses/i2c-designware-*
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
@@ -21825,6 +21879,7 @@ M: Juergen Gross <jgross@suse.com>
M: Stefano Stabellini <sstabellini@kernel.org>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: iommu@lists.linux-foundation.org
+L: iommu@lists.linux.dev
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
diff --git a/Makefile b/Makefile
index c43d825a3c4c..513c1fbf7888 100644
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 19
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Superb Owl
# *DOCUMENTATION*
@@ -788,6 +788,7 @@ stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong
KBUILD_CFLAGS += $(stackp-flags-y)
KBUILD_CFLAGS-$(CONFIG_WERROR) += -Werror
+KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds
KBUILD_CFLAGS += $(KBUILD_CFLAGS-y) $(CONFIG_CC_IMPLICIT_FALLTHROUGH)
ifdef CONFIG_CC_IS_CLANG
@@ -805,6 +806,9 @@ endif
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
+# These result in bogus false positives
+KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer)
+
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
else
diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
index 443e8b022897..14af1fd6d247 100644
--- a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
@@ -120,26 +120,31 @@
port@0 {
reg = <0>;
label = "lan1";
+ phy-mode = "internal";
};
port@1 {
reg = <1>;
label = "lan2";
+ phy-mode = "internal";
};
port@2 {
reg = <2>;
label = "lan3";
+ phy-mode = "internal";
};
port@3 {
reg = <3>;
label = "lan4";
+ phy-mode = "internal";
};
port@4 {
reg = <4>;
label = "lan5";
+ phy-mode = "internal";
};
port@5 {
diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h
new file mode 100644
index 000000000000..7ebb7eb0bd93
--- /dev/null
+++ b/arch/arm/include/asm/xen/xen-ops.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <xen/arm/xen-ops.h>
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 82ffac621854..059cce018570 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -33,7 +33,7 @@
#include <asm/dma-iommu.h>
#include <asm/mach/map.h>
#include <asm/system_info.h>
-#include <xen/swiotlb-xen.h>
+#include <asm/xen/xen-ops.h>
#include "dma.h"
#include "mm.h"
@@ -2287,10 +2287,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
set_dma_ops(dev, dma_ops);
-#ifdef CONFIG_XEN
- if (xen_initial_domain())
- dev->dma_ops = &xen_swiotlb_dma_ops;
-#endif
+ xen_setup_dma_ops(dev);
dev->archdata.dma_ops_setup = true;
}
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 07eb69f9e7df..1f9c3ba32833 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -443,6 +443,8 @@ static int __init xen_guest_init(void)
if (!xen_domain())
return 0;
+ xen_set_restricted_virtio_memory_access();
+
if (!acpi_disabled)
xen_acpi_guest_init();
else
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 47a1e25e25bb..de32152cea04 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -363,11 +363,6 @@ struct kvm_vcpu_arch {
struct kvm_pmu pmu;
/*
- * Anything that is not used directly from assembly code goes
- * here.
- */
-
- /*
* Guest registers we preserve during guest debugging.
*
* These shadow registers are updated by the kvm_handle_sys_reg
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 55f998c3dc28..42ff95dba6da 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -843,9 +843,9 @@
#define ID_AA64SMFR0_F32F32_SHIFT 32
#define ID_AA64SMFR0_FA64 0x1
-#define ID_AA64SMFR0_I16I64 0x4
+#define ID_AA64SMFR0_I16I64 0xf
#define ID_AA64SMFR0_F64F64 0x1
-#define ID_AA64SMFR0_I8I32 0x4
+#define ID_AA64SMFR0_I8I32 0xf
#define ID_AA64SMFR0_F16F32 0x1
#define ID_AA64SMFR0_B16F32 0x1
#define ID_AA64SMFR0_F32F32 0x1
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 3c8af033a997..0e80db4327b6 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -113,6 +113,9 @@ static __always_inline bool has_vhe(void)
/*
* Code only run in VHE/NVHE hyp context can assume VHE is present or
* absent. Otherwise fall back to caps.
+ * This allows the compiler to discard VHE-specific code from the
+ * nVHE object, reducing the number of external symbol references
+ * needed to link.
*/
if (is_vhe_hyp_code())
return true;
diff --git a/arch/arm64/include/asm/xen/xen-ops.h b/arch/arm64/include/asm/xen/xen-ops.h
new file mode 100644
index 000000000000..7ebb7eb0bd93
--- /dev/null
+++ b/arch/arm64/include/asm/xen/xen-ops.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <xen/arm/xen-ops.h>
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 42ea2bd856c6..8d88433de81d 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1974,15 +1974,7 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
#ifdef CONFIG_KVM
static bool is_kvm_protected_mode(const struct arm64_cpu_capabilities *entry, int __unused)
{
- if (kvm_get_mode() != KVM_MODE_PROTECTED)
- return false;
-
- if (is_kernel_in_hyp_mode()) {
- pr_warn("Protected KVM not available with VHE\n");
- return false;
- }
-
- return true;
+ return kvm_get_mode() == KVM_MODE_PROTECTED;
}
#endif /* CONFIG_KVM */
@@ -3109,7 +3101,6 @@ void cpu_set_feature(unsigned int num)
WARN_ON(num >= MAX_CPU_FEATURES);
elf_hwcap |= BIT(num);
}
-EXPORT_SYMBOL_GPL(cpu_set_feature);
bool cpu_have_feature(unsigned int num)
{
diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
index d42a205ef625..bd5df50e4643 100644
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -102,7 +102,6 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
* x19-x29 per the AAPCS, and we created frame records upon entry, so we need
* to restore x0-x8, x29, and x30.
*/
-ftrace_common_return:
/* Restore function arguments */
ldp x0, x1, [sp]
ldp x2, x3, [sp, #S_X2]
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 819979398127..aecf3071efdd 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -331,7 +331,7 @@ void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
* trapping to the kernel.
*
* When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
- * corresponding Zn), P0-P15 and FFR are encoded in in
+ * corresponding Zn), P0-P15 and FFR are encoded in
* task->thread.sve_state, formatted appropriately for vector
* length task->thread.sve_vl or, if SVCR.SM is set,
* task->thread.sme_vl.
@@ -1916,10 +1916,15 @@ void __efi_fpsimd_begin(void)
if (system_supports_sme()) {
svcr = read_sysreg_s(SYS_SVCR);
- if (!system_supports_fa64())
- ffr = svcr & SVCR_SM_MASK;
+ __this_cpu_write(efi_sm_state,
+ svcr & SVCR_SM_MASK);
- __this_cpu_write(efi_sm_state, ffr);
+ /*
+ * Unless we have FA64 FFR does not
+ * exist in streaming mode.
+ */
+ if (!system_supports_fa64())
+ ffr = !(svcr & SVCR_SM_MASK);
}
sve_save_state(sve_state + sve_ffr_offset(sve_max_vl()),
@@ -1964,8 +1969,13 @@ void __efi_fpsimd_end(void)
sysreg_clear_set_s(SYS_SVCR,
0,
SVCR_SM_MASK);
+
+ /*
+ * Unless we have FA64 FFR does not
+ * exist in streaming mode.
+ */
if (!system_supports_fa64())
- ffr = efi_sm_state;
+ ffr = false;
}
}
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index f447c4a36f69..ea5dc7c90f46 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -78,47 +78,76 @@ static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
}
/*
- * Turn on the call to ftrace_caller() in instrumented function
+ * Find the address the callsite must branch to in order to reach '*addr'.
+ *
+ * Due to the limited range of 'BL' instructions, modules may be placed too far
+ * away to branch directly and must use a PLT.
+ *
+ * Returns true when '*addr' contains a reachable target address, or has been
+ * modified to contain a PLT address. Returns false otherwise.
*/
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
+ struct module *mod,
+ unsigned long *addr)
{
unsigned long pc = rec->ip;
- u32 old, new;
- long offset = (long)pc - (long)addr;
+ long offset = (long)*addr - (long)pc;
+ struct plt_entry *plt;
- if (offset < -SZ_128M || offset >= SZ_128M) {
- struct module *mod;
- struct plt_entry *plt;
+ /*
+ * When the target is within range of the 'BL' instruction, use 'addr'
+ * as-is and branch to that directly.
+ */
+ if (offset >= -SZ_128M && offset < SZ_128M)
+ return true;
- if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
- return -EINVAL;
+ /*
+ * When the target is outside of the range of a 'BL' instruction, we
+ * must use a PLT to reach it. We can only place PLTs for modules, and
+ * only when module PLT support is built-in.
+ */
+ if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
+ return false;
- /*
- * On kernels that support module PLTs, the offset between the
- * branch instruction and its target may legally exceed the
- * range of an ordinary relative 'bl' opcode. In this case, we
- * need to branch via a trampoline in the module.
- *
- * NOTE: __module_text_address() must be called with preemption
- * disabled, but we can rely on ftrace_lock to ensure that 'mod'
- * retains its validity throughout the remainder of this code.
- */
+ /*
+ * 'mod' is only set at module load time, but if we end up
+ * dealing with an out-of-range condition, we can assume it
+ * is due to a module being loaded far away from the kernel.
+ *
+ * NOTE: __module_text_address() must be called with preemption
+ * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+ * retains its validity throughout the remainder of this code.
+ */
+ if (!mod) {
preempt_disable();
mod = __module_text_address(pc);
preempt_enable();
+ }
- if (WARN_ON(!mod))
- return -EINVAL;
+ if (WARN_ON(!mod))
+ return false;
- plt = get_ftrace_plt(mod, addr);
- if (!plt) {
- pr_err("ftrace: no module PLT for %ps\n", (void *)addr);
- return -EINVAL;
- }
-
- addr = (unsigned long)plt;
+ plt = get_ftrace_plt(mod, *addr);
+ if (!plt) {
+ pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
+ return false;
}
+ *addr = (unsigned long)plt;
+ return true;
+}
+
+/*
+ * Turn on the call to ftrace_caller() in instrumented function
+ */
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned long pc = rec->ip;
+ u32 old, new;
+
+ if (!ftrace_find_callable_addr(rec, NULL, &addr))
+ return -EINVAL;
+
old = aarch64_insn_gen_nop();
new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
@@ -132,6 +161,11 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long pc = rec->ip;
u32 old, new;
+ if (!ftrace_find_callable_addr(rec, NULL, &old_addr))
+ return -EINVAL;
+ if (!ftrace_find_callable_addr(rec, NULL, &addr))
+ return -EINVAL;
+
old = aarch64_insn_gen_branch_imm(pc, old_addr,
AARCH64_INSN_BRANCH_LINK);
new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
@@ -181,54 +215,15 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
unsigned long addr)
{
unsigned long pc = rec->ip;
- bool validate = true;
u32 old = 0, new;
- long offset = (long)pc - (long)addr;
- if (offset < -SZ_128M || offset >= SZ_128M) {
- u32 replaced;
-
- if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
- return -EINVAL;
-
- /*
- * 'mod' is only set at module load time, but if we end up
- * dealing with an out-of-range condition, we can assume it
- * is due to a module being loaded far away from the kernel.
- */
- if (!mod) {
- preempt_disable();
- mod = __module_text_address(pc);
- preempt_enable();
-
- if (WARN_ON(!mod))
- return -EINVAL;
- }
-
- /*
- * The instruction we are about to patch may be a branch and
- * link instruction that was redirected via a PLT entry. In
- * this case, the normal validation will fail, but we can at
- * least check that we are dealing with a branch and link
- * instruction that points into the right module.
- */
- if (aarch64_insn_read((void *)pc, &replaced))
- return -EFAULT;
-
- if (!aarch64_insn_is_bl(replaced) ||
- !within_module(pc + aarch64_get_branch_offset(replaced),
- mod))
- return -EINVAL;
-
- validate = false;
- } else {
- old = aarch64_insn_gen_branch_imm(pc, addr,
- AARCH64_INSN_BRANCH_LINK);
- }
+ if (!ftrace_find_callable_addr(rec, mod, &addr))
+ return -EINVAL;
+ old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
new = aarch64_insn_gen_nop();
- return ftrace_modify_code(pc, old, new, validate);
+ return ftrace_modify_code(pc, old, new, true);
}
void arch_ftrace_update_code(int command)
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index 57b30bcf9f21..f6b00743c399 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -244,6 +244,11 @@ static void mte_update_gcr_excl(struct task_struct *task)
SYS_GCR_EL1);
}
+#ifdef CONFIG_KASAN_HW_TAGS
+/* Only called from assembly, silence sparse */
+void __init kasan_hw_tags_enable(struct alt_instr *alt, __le32 *origptr,
+ __le32 *updptr, int nr_inst);
+
void __init kasan_hw_tags_enable(struct alt_instr *alt, __le32 *origptr,
__le32 *updptr, int nr_inst)
{
@@ -252,6 +257,7 @@ void __init kasan_hw_tags_enable(struct alt_instr *alt, __le32 *origptr,
if (kasan_hw_tags_enabled())
*updptr = cpu_to_le32(aarch64_insn_gen_nop());
}
+#endif
void mte_thread_init_user(void)
{
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index cf3a759f10d4..fea3223704b6 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -303,14 +303,13 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p)
early_fixmap_init();
early_ioremap_init();
+ setup_machine_fdt(__fdt_pointer);
+
/*
* Initialise the static keys early as they may be enabled by the
- * cpufeature code, early parameters, and DT setup.
+ * cpufeature code and early parameters.
*/
jump_label_init();
-
- setup_machine_fdt(__fdt_pointer);
-
parse_early_param();
/*
diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
index 4e39ace073af..3b8d062e30ea 100644
--- a/arch/arm64/kvm/arch_timer.c
+++ b/arch/arm64/kvm/arch_timer.c
@@ -1230,6 +1230,9 @@ bool kvm_arch_timer_get_input_level(int vintid)
struct kvm_vcpu *vcpu = kvm_get_running_vcpu();
struct arch_timer_context *timer;
+ if (WARN(!vcpu, "No vcpu context!\n"))
+ return false;
+
if (vintid == vcpu_vtimer(vcpu)->irq.irq)
timer = vcpu_vtimer(vcpu);
else if (vintid == vcpu_ptimer(vcpu)->irq.irq)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 400bb0fe2745..83a7f61354d3 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -150,8 +150,10 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
if (ret)
goto out_free_stage2_pgd;
- if (!zalloc_cpumask_var(&kvm->arch.supported_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&kvm->arch.supported_cpus, GFP_KERNEL)) {
+ ret = -ENOMEM;
goto out_free_stage2_pgd;
+ }
cpumask_copy(kvm->arch.supported_cpus, cpu_possible_mask);
kvm_vgic_early_init(kvm);
@@ -2110,11 +2112,11 @@ static int finalize_hyp_mode(void)
return 0;
/*
- * Exclude HYP BSS from kmemleak so that it doesn't get peeked
- * at, which would end badly once the section is inaccessible.
- * None of other sections should ever be introspected.
+ * Exclude HYP sections from kmemleak so that they don't get peeked
+ * at, which would end badly once inaccessible.
*/
kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
+ kmemleak_free_part(__va(hyp_mem_base), hyp_mem_size);
return pkvm_drop_host_privileges();
}
@@ -2271,7 +2273,11 @@ static int __init early_kvm_mode_cfg(char *arg)
return -EINVAL;
if (strcmp(arg, "protected") == 0) {
- kvm_mode = KVM_MODE_PROTECTED;
+ if (!is_kernel_in_hyp_mode())
+ kvm_mode = KVM_MODE_PROTECTED;
+ else
+ pr_warn_once("Protected KVM not available with VHE\n");
+
return 0;
}
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
index 3d251a4d2cf7..6012b08ecb14 100644
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -80,6 +80,7 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
vcpu->arch.flags &= ~KVM_ARM64_FP_ENABLED;
vcpu->arch.flags |= KVM_ARM64_FP_HOST;
+ vcpu->arch.flags &= ~KVM_ARM64_HOST_SVE_ENABLED;
if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
vcpu->arch.flags |= KVM_ARM64_HOST_SVE_ENABLED;
@@ -93,6 +94,7 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
* operations. Do this for ZA as well for now for simplicity.
*/
if (system_supports_sme()) {
+ vcpu->arch.flags &= ~KVM_ARM64_HOST_SME_ENABLED;
if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
vcpu->arch.flags |= KVM_ARM64_HOST_SME_ENABLED;
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index 78edf077fa3b..1e78acf9662e 100644
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -314,15 +314,11 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
enum kvm_pgtable_prot prot)
{
- hyp_assert_lock_held(&host_kvm.lock);
-
return host_stage2_try(__host_stage2_idmap, addr, addr + size, prot);
}
int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id)
{
- hyp_assert_lock_held(&host_kvm.lock);
-
return host_stage2_try(kvm_pgtable_stage2_set_owner, &host_kvm.pgt,
addr, size, &host_s2_pool, owner_id);
}
diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
index b6d86e423319..35a4331ba5f3 100644
--- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c
+++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -243,15 +243,9 @@ u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id)
case SYS_ID_AA64MMFR2_EL1:
return get_pvm_id_aa64mmfr2(vcpu);
default:
- /*
- * Should never happen because all cases are covered in
- * pvm_sys_reg_descs[].
- */
- WARN_ON(1);
- break;
+ /* Unhandled ID register, RAZ */
+ return 0;
}
-
- return 0;
}
static u64 read_id_reg(const struct kvm_vcpu *vcpu,
@@ -332,6 +326,16 @@ static bool pvm_gic_read_sre(struct kvm_vcpu *vcpu,
/* Mark the specified system register as an AArch64 feature id register. */
#define AARCH64(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch64 }
+/*
+ * sys_reg_desc initialiser for architecturally unallocated cpufeature ID
+ * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
+ * (1 <= crm < 8, 0 <= Op2 < 8).
+ */
+#define ID_UNALLOCATED(crm, op2) { \
+ Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2), \
+ .access = pvm_access_id_aarch64, \
+}
+
/* Mark the specified system register as Read-As-Zero/Write-Ignored */
#define RAZ_WI(REG) { SYS_DESC(REG), .access = pvm_access_raz_wi }
@@ -375,24 +379,46 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
AARCH32(SYS_MVFR0_EL1),
AARCH32(SYS_MVFR1_EL1),
AARCH32(SYS_MVFR2_EL1),
+ ID_UNALLOCATED(3,3),
AARCH32(SYS_ID_PFR2_EL1),
AARCH32(SYS_ID_DFR1_EL1),
AARCH32(SYS_ID_MMFR5_EL1),
+ ID_UNALLOCATED(3,7),
/* AArch64 ID registers */
/* CRm=4 */
AARCH64(SYS_ID_AA64PFR0_EL1),
AARCH64(SYS_ID_AA64PFR1_EL1),
+ ID_UNALLOCATED(4,2),
+ ID_UNALLOCATED(4,3),
AARCH64(SYS_ID_AA64ZFR0_EL1),
+ ID_UNALLOCATED(4,5),
+ ID_UNALLOCATED(4,6),
+ ID_UNALLOCATED(4,7),
AARCH64(SYS_ID_AA64DFR0_EL1),
AARCH64(SYS_ID_AA64DFR1_EL1),
+ ID_UNALLOCATED(5,2),
+ ID_UNALLOCATED(5,3),
AARCH64(SYS_ID_AA64AFR0_EL1),
AARCH64(SYS_ID_AA64AFR1_EL1),
+ ID_UNALLOCATED(5,6),
+ ID_UNALLOCATED(5,7),
AARCH64(SYS_ID_AA64ISAR0_EL1),
AARCH64(SYS_ID_AA64ISAR1_EL1),
+ AARCH64(SYS_ID_AA64ISAR2_EL1),
+ ID_UNALLOCATED(6,3),
+ ID_UNALLOCATED(6,4),
+ ID_UNALLOCATED(6,5),
+ ID_UNALLOCATED(6,6),
+ ID_UNALLOCATED(6,7),
AARCH64(SYS_ID_AA64MMFR0_EL1),
AARCH64(SYS_ID_AA64MMFR1_EL1),
AARCH64(SYS_ID_AA64MMFR2_EL1),
+ ID_UNALLOCATED(7,3),
+ ID_UNALLOCATED(7,4),
+ ID_UNALLOCATED(7,5),
+ ID_UNALLOCATED(7,6),
+ ID_UNALLOCATED(7,7),
/* Scalable Vector Registers are restricted. */
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v2.c b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
index 77a67e9d3d14..e070cda86e12 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
@@ -429,11 +429,11 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
vgic_mmio_read_pending, vgic_mmio_write_spending,
- NULL, vgic_uaccess_write_spending, 1,
+ vgic_uaccess_read_pending, vgic_uaccess_write_spending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
vgic_mmio_read_pending, vgic_mmio_write_cpending,
- NULL, vgic_uaccess_write_cpending, 1,
+ vgic_uaccess_read_pending, vgic_uaccess_write_cpending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
vgic_mmio_read_active, vgic_mmio_write_sactive,
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index f7aa7bcd6fb8..f15e29cc63ce 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -353,42 +353,6 @@ static unsigned long vgic_mmio_read_v3_idregs(struct kvm_vcpu *vcpu,
return 0;
}
-static unsigned long vgic_v3_uaccess_read_pending(struct kvm_vcpu *vcpu,
- gpa_t addr, unsigned int len)
-{
- u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
- u32 value = 0;
- int i;
-
- /*
- * pending state of interrupt is latched in pending_latch variable.
- * Userspace will save and restore pending state and line_level
- * separately.
- * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst
- * for handling of ISPENDR and ICPENDR.
- */
- for (i = 0; i < len * 8; i++) {
- struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
- bool state = irq->pending_latch;
-
- if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
- int err;
-
- err = irq_get_irqchip_state(irq->host_irq,
- IRQCHIP_STATE_PENDING,
- &state);
- WARN_ON(err);
- }
-
- if (state)
- value |= (1U << i);
-
- vgic_put_irq(vcpu->kvm, irq);
- }
-
- return value;
-}
-
static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
unsigned long val)
@@ -666,7 +630,7 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = {
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISPENDR,
vgic_mmio_read_pending, vgic_mmio_write_spending,
- vgic_v3_uaccess_read_pending, vgic_v3_uaccess_write_pending, 1,
+ vgic_uaccess_read_pending, vgic_v3_uaccess_write_pending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICPENDR,
vgic_mmio_read_pending, vgic_mmio_write_cpending,
@@ -750,7 +714,7 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = {
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISPENDR0,
vgic_mmio_read_pending, vgic_mmio_write_spending,
- vgic_v3_uaccess_read_pending, vgic_v3_uaccess_write_pending, 4,
+ vgic_uaccess_read_pending, vgic_v3_uaccess_write_pending, 4,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICPENDR0,
vgic_mmio_read_pending, vgic_mmio_write_cpending,
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index 49837d3a3ef5..997d0fce2088 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -226,8 +226,9 @@ int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
return 0;
}
-unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
- gpa_t addr, unsigned int len)
+static unsigned long __read_pending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len,
+ bool is_user)
{
u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
u32 value = 0;
@@ -239,6 +240,15 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
unsigned long flags;
bool val;
+ /*
+ * When used from userspace with a GICv3 model:
+ *
+ * Pending state of interrupt is latched in pending_latch
+ * variable. Userspace will save and restore pending state
+ * and line_level separately.
+ * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst
+ * for handling of ISPENDR and ICPENDR.
+ */
raw_spin_lock_irqsave(&irq->irq_lock, flags);
if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
int err;
@@ -248,10 +258,20 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
IRQCHIP_STATE_PENDING,
&val);
WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
- } else if (vgic_irq_is_mapped_level(irq)) {
+ } else if (!is_user && vgic_irq_is_mapped_level(irq)) {
val = vgic_get_phys_line_level(irq);
} else {
- val = irq_is_pending(irq);
+ switch (vcpu->kvm->arch.vgic.vgic_model) {
+ case KVM_DEV_TYPE_ARM_VGIC_V3:
+ if (is_user) {
+ val = irq->pending_latch;
+ break;
+ }
+ fallthrough;
+ default:
+ val = irq_is_pending(irq);
+ break;
+ }
}
value |= ((u32)val << i);
@@ -263,6 +283,18 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
return value;
}
+unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len)
+{
+ return __read_pending(vcpu, addr, len, false);
+}
+
+unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len)
+{
+ return __read_pending(vcpu, addr, len, true);
+}
+
static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
{
return (vgic_irq_is_sgi(irq->intid) &&
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.h b/arch/arm64/kvm/vgic/vgic-mmio.h
index 3fa696f198a3..6082d4b66d39 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.h
+++ b/arch/arm64/kvm/vgic/vgic-mmio.h
@@ -149,6 +149,9 @@ int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len);
+unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len);
+
void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
unsigned long val);
diff --git a/arch/arm64/kvm/vmid.c b/arch/arm64/kvm/vmid.c
index 8d5f0506fd87..d78ae63d7c15 100644
--- a/arch/arm64/kvm/vmid.c
+++ b/arch/arm64/kvm/vmid.c
@@ -66,7 +66,7 @@ static void flush_context(void)
* the next context-switch, we broadcast TLB flush + I-cache
* invalidation over the inner shareable domain on rollover.
*/
- kvm_call_hyp(__kvm_flush_vm_context);
+ kvm_call_hyp(__kvm_flush_vm_context);
}
static bool check_update_reserved_vmid(u64 vmid, u64 newvmid)
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index 0ea6cc25dc66..21c907987080 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -218,8 +218,6 @@ SYM_FUNC_ALIAS(__dma_flush_area, __pi___dma_flush_area)
*/
SYM_FUNC_START(__pi___dma_map_area)
add x1, x0, x1
- cmp w2, #DMA_FROM_DEVICE
- b.eq __pi_dcache_inval_poc
b __pi_dcache_clean_poc
SYM_FUNC_END(__pi___dma_map_area)
SYM_FUNC_ALIAS(__dma_map_area, __pi___dma_map_area)
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 6719f9efea09..6099c81b9322 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -9,9 +9,9 @@
#include <linux/dma-map-ops.h>
#include <linux/dma-iommu.h>
#include <xen/xen.h>
-#include <xen/swiotlb-xen.h>
#include <asm/cacheflush.h>
+#include <asm/xen/xen-ops.h>
void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
enum dma_data_direction dir)
@@ -52,8 +52,5 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
if (iommu)
iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
-#ifdef CONFIG_XEN
- if (xen_swiotlb_detect())
- dev->dma_ops = &xen_swiotlb_dma_ops;
-#endif
+ xen_setup_dma_ops(dev);
}
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 8ab4035dea27..42f2e9a8616c 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1478,6 +1478,7 @@ skip_init_ctx:
bpf_jit_binary_free(header);
prog->bpf_func = NULL;
prog->jited = 0;
+ prog->jited_len = 0;
goto out_off;
}
bpf_jit_binary_lock_ro(header);
diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk
index 89bfb74e28de..5c55509eb43f 100755
--- a/arch/arm64/tools/gen-sysreg.awk
+++ b/arch/arm64/tools/gen-sysreg.awk
@@ -253,7 +253,7 @@ END {
next
}
-/0b[01]+/ && block = "Enum" {
+/0b[01]+/ && block == "Enum" {
expect_fields(2)
val = $1
name = $2
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index 80657bf83b05..1920d52653b4 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -343,6 +343,7 @@ config NR_CPUS
config NUMA
bool "NUMA Support"
+ select SMP
select ACPI_NUMA if ACPI
help
Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
diff --git a/arch/loongarch/include/asm/hardirq.h b/arch/loongarch/include/asm/hardirq.h
index befe8184aa08..0ef3b18f8980 100644
--- a/arch/loongarch/include/asm/hardirq.h
+++ b/arch/loongarch/include/asm/hardirq.h
@@ -19,7 +19,7 @@ typedef struct {
unsigned int __softirq_pending;
} ____cacheline_aligned irq_cpustat_t;
-DECLARE_PER_CPU_ALIGNED(irq_cpustat_t, irq_stat);
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
#define __ARCH_IRQ_STAT
diff --git a/arch/loongarch/include/asm/percpu.h b/arch/loongarch/include/asm/percpu.h
index 34f15a6fb1e7..e6569f18c6dd 100644
--- a/arch/loongarch/include/asm/percpu.h
+++ b/arch/loongarch/include/asm/percpu.h
@@ -6,6 +6,7 @@
#define __ASM_PERCPU_H
#include <asm/cmpxchg.h>
+#include <asm/loongarch.h>
/* Use r21 for fast access */
register unsigned long __my_cpu_offset __asm__("$r21");
diff --git a/arch/loongarch/include/asm/smp.h b/arch/loongarch/include/asm/smp.h
index 551e1f37c705..71189b28bfb2 100644
--- a/arch/loongarch/include/asm/smp.h
+++ b/arch/loongarch/include/asm/smp.h
@@ -9,10 +9,16 @@
#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/linkage.h>
-#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
+extern int smp_num_siblings;
+extern int num_processors;
+extern int disabled_cpus;
+extern cpumask_t cpu_sibling_map[];
+extern cpumask_t cpu_core_map[];
+extern cpumask_t cpu_foreign_map[];
+
void loongson3_smp_setup(void);
void loongson3_prepare_cpus(unsigned int max_cpus);
void loongson3_boot_secondary(int cpu, struct task_struct *idle);
@@ -25,26 +31,11 @@ int loongson3_cpu_disable(void);
void loongson3_cpu_die(unsigned int cpu);
#endif
-#ifdef CONFIG_SMP
-
static inline void plat_smp_setup(void)
{
loongson3_smp_setup();
}
-#else /* !CONFIG_SMP */
-
-static inline void plat_smp_setup(void) { }
-
-#endif /* !CONFIG_SMP */
-
-extern int smp_num_siblings;
-extern int num_processors;
-extern int disabled_cpus;
-extern cpumask_t cpu_sibling_map[];
-extern cpumask_t cpu_core_map[];
-extern cpumask_t cpu_foreign_map[];
-
static inline int raw_smp_processor_id(void)
{
#if defined(__VDSO__)
diff --git a/arch/loongarch/include/asm/timex.h b/arch/loongarch/include/asm/timex.h
index d3ed99a4fdbd..fb41e9e7a222 100644
--- a/arch/loongarch/include/asm/timex.h
+++ b/arch/loongarch/include/asm/timex.h
@@ -12,13 +12,6 @@
#include <asm/cpu.h>
#include <asm/cpu-features.h>
-/*
- * Standard way to access the cycle counter.
- * Currently only used on SMP for scheduling.
- *
- * We know that all SMP capable CPUs have cycle counters.
- */
-
typedef unsigned long cycles_t;
#define get_cycles get_cycles
diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c
index b16c3dea5eeb..bb729ee8a237 100644
--- a/arch/loongarch/kernel/acpi.c
+++ b/arch/loongarch/kernel/acpi.c
@@ -138,6 +138,7 @@ void __init acpi_boot_table_init(void)
}
}
+#ifdef CONFIG_SMP
static int set_processor_mask(u32 id, u32 flags)
{
@@ -166,15 +167,18 @@ static int set_processor_mask(u32 id, u32 flags)
return cpu;
}
+#endif
static void __init acpi_process_madt(void)
{
+#ifdef CONFIG_SMP
int i;
for (i = 0; i < NR_CPUS; i++) {
__cpu_number_map[i] = -1;
__cpu_logical_map[i] = -1;
}
+#endif
loongson_sysconf.nr_cpus = num_processors;
}
diff --git a/arch/loongarch/kernel/cacheinfo.c b/arch/loongarch/kernel/cacheinfo.c
index 8c9fe29e98f0..b38f5489d094 100644
--- a/arch/loongarch/kernel/cacheinfo.c
+++ b/arch/loongarch/kernel/cacheinfo.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
+#include <asm/cpu-info.h>
#include <linux/cacheinfo.h>
/* Populates leaf and increments to next leaf */
diff --git a/arch/loongarch/kernel/irq.c b/arch/loongarch/kernel/irq.c
index 4b671d305ede..b34b8d792aa4 100644
--- a/arch/loongarch/kernel/irq.c
+++ b/arch/loongarch/kernel/irq.c
@@ -22,6 +22,8 @@
#include <asm/setup.h>
DEFINE_PER_CPU(unsigned long, irq_stack);
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
struct irq_domain *cpu_domain;
struct irq_domain *liointc_domain;
@@ -56,8 +58,11 @@ int arch_show_interrupts(struct seq_file *p, int prec)
void __init init_IRQ(void)
{
- int i, r, ipi_irq;
+ int i;
+#ifdef CONFIG_SMP
+ int r, ipi_irq;
static int ipi_dummy_dev;
+#endif
unsigned int order = get_order(IRQ_STACK_SIZE);
struct page *page;
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index 6d944d65f600..bfa0dfe8b7d7 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -120,10 +120,12 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
/*
* Copy architecture-specific thread state
*/
-int copy_thread(unsigned long clone_flags, unsigned long usp,
- unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
{
unsigned long childksp;
+ unsigned long tls = args->tls;
+ unsigned long usp = args->stack;
+ unsigned long clone_flags = args->flags;
struct pt_regs *childregs, *regs = current_pt_regs();
childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
@@ -136,12 +138,12 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
p->thread.csr_crmd = csr_read32(LOONGARCH_CSR_CRMD);
p->thread.csr_prmd = csr_read32(LOONGARCH_CSR_PRMD);
p->thread.csr_ecfg = csr_read32(LOONGARCH_CSR_ECFG);
- if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) {
+ if (unlikely(args->fn)) {
/* kernel thread */
- p->thread.reg23 = usp; /* fn */
- p->thread.reg24 = kthread_arg;
p->thread.reg03 = childksp;
- p->thread.reg01 = (unsigned long) ret_from_kernel_thread;
+ p->thread.reg23 = (unsigned long)args->fn;
+ p->thread.reg24 = (unsigned long)args->fn_arg;
+ p->thread.reg01 = (unsigned long)ret_from_kernel_thread;
memset(childregs, 0, sizeof(struct pt_regs));
childregs->csr_euen = p->thread.csr_euen;
childregs->csr_crmd = p->thread.csr_crmd;
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index 185e4035811a..c74860b53375 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -39,7 +39,6 @@
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/setup.h>
-#include <asm/smp.h>
#include <asm/time.h>
#define SMBIOS_BIOSSIZE_OFFSET 0x09
@@ -349,8 +348,6 @@ static void __init prefill_possible_map(void)
nr_cpu_ids = possible;
}
-#else
-static inline void prefill_possible_map(void) {}
#endif
void __init setup_arch(char **cmdline_p)
@@ -367,8 +364,10 @@ void __init setup_arch(char **cmdline_p)
arch_mem_init(cmdline_p);
resource_init();
+#ifdef CONFIG_SMP
plat_smp_setup();
prefill_possible_map();
+#endif
paging_init();
}
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index b8c53b755a25..73cec62504fb 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -66,8 +66,6 @@ static cpumask_t cpu_core_setup_map;
struct secondary_data cpuboot_data;
static DEFINE_PER_CPU(int, cpu_state);
-DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
-EXPORT_PER_CPU_SYMBOL(irq_stat);
enum ipi_msg_type {
IPI_RESCHEDULE,
diff --git a/arch/loongarch/kernel/vmlinux.lds.S b/arch/loongarch/kernel/vmlinux.lds.S
index 9d508158fe1a..78311a6101a3 100644
--- a/arch/loongarch/kernel/vmlinux.lds.S
+++ b/arch/loongarch/kernel/vmlinux.lds.S
@@ -101,6 +101,7 @@ SECTIONS
STABS_DEBUG
DWARF_DEBUG
+ ELF_DETAILS
.gptab.sdata : {
*(.gptab.data)
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index b0a034b468bb..42e69664efd9 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -111,8 +111,9 @@
clocks = <&cgu X1000_CLK_RTCLK>,
<&cgu X1000_CLK_EXCLK>,
- <&cgu X1000_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
+ <&cgu X1000_CLK_PCLK>,
+ <&cgu X1000_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
index dbf21afaccb1..65a5da71c199 100644
--- a/arch/mips/boot/dts/ingenic/x1830.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -104,8 +104,9 @@
clocks = <&cgu X1830_CLK_RTCLK>,
<&cgu X1830_CLK_EXCLK>,
- <&cgu X1830_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
+ <&cgu X1830_CLK_PCLK>,
+ <&cgu X1830_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/mips/generic/board-ranchu.c b/arch/mips/generic/board-ranchu.c
index a89aaad59cb1..930c45041882 100644
--- a/arch/mips/generic/board-ranchu.c
+++ b/arch/mips/generic/board-ranchu.c
@@ -44,6 +44,7 @@ static __init unsigned int ranchu_measure_hpt_freq(void)
__func__);
rtc_base = of_iomap(np, 0);
+ of_node_put(np);
if (!rtc_base)
panic("%s(): Failed to ioremap Goldfish RTC base!", __func__);
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index 5204fc6d6d50..1187729d8cbb 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -208,6 +208,12 @@ void __init ltq_soc_init(void)
of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
panic("Failed to get core resources");
+ of_node_put(np_status);
+ of_node_put(np_ebu);
+ of_node_put(np_sys1);
+ of_node_put(np_syseth);
+ of_node_put(np_sysgpe);
+
if ((request_mem_region(res_status.start, resource_size(&res_status),
res_status.name) < 0) ||
(request_mem_region(res_ebu.start, resource_size(&res_ebu),
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index b732495f138a..20622bf0a9b3 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -408,6 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
if (!ltq_eiu_membase)
panic("Failed to remap eiu memory");
}
+ of_node_put(eiu_node);
return 0;
}
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 084f6caba5f2..d444a1b98a72 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -441,6 +441,10 @@ void __init ltq_soc_init(void)
of_address_to_resource(np_ebu, 0, &res_ebu))
panic("Failed to get core resources");
+ of_node_put(np_pmu);
+ of_node_put(np_cgu);
+ of_node_put(np_ebu);
+
if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
res_pmu.name) ||
!request_mem_region(res_cgu.start, resource_size(&res_cgu),
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index bbf1e38e1431..2cb708cdf01a 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -214,6 +214,8 @@ static void update_gic_frequency_dt(void)
if (of_update_property(node, &gic_frequency_prop) < 0)
pr_err("error updating gic frequency property\n");
+
+ of_node_put(node);
}
#endif
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 129915616763..d9c8c4e46aff 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -98,13 +98,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
np = of_find_compatible_node(NULL, NULL, lookup->compatible);
if (np) {
lookup->name = (char *)np->name;
- if (lookup->phys_addr)
+ if (lookup->phys_addr) {
+ of_node_put(np);
continue;
+ }
if (!of_address_to_resource(np, 0, &res))
lookup->phys_addr = res.start;
+ of_node_put(np);
}
}
+ of_node_put(root);
+
return 0;
}
diff --git a/arch/mips/pic32/pic32mzda/time.c b/arch/mips/pic32/pic32mzda/time.c
index 7174e9abbb1b..777b515c52c8 100644
--- a/arch/mips/pic32/pic32mzda/time.c
+++ b/arch/mips/pic32/pic32mzda/time.c
@@ -32,6 +32,9 @@ static unsigned int pic32_xlate_core_timer_irq(void)
goto default_map;
irq = irq_of_parse_and_map(node, 0);
+
+ of_node_put(node);
+
if (!irq)
goto default_map;
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 587c7b998769..ea8072acf8d9 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -40,6 +40,8 @@ __iomem void *plat_of_remap_node(const char *node)
if (of_address_to_resource(np, 0, &res))
panic("Failed to get resource for %s", node);
+ of_node_put(np);
+
if (!request_mem_region(res.start,
resource_size(&res),
res.name))
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 7b7f25b4b057..9240bcdbe74e 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -640,8 +640,6 @@ static int icu_get_irq(unsigned int irq)
printk(KERN_ERR "spurious ICU interrupt: %04x,%04x\n", pend1, pend2);
- atomic_inc(&irq_err_count);
-
return -1;
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index be68c1f02b79..c2ce2e60c8f0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -223,7 +223,6 @@ config PPC
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
select HAVE_IOREMAP_PROT
- select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA if DEFAULT_UIMAGE
@@ -786,7 +785,6 @@ config THREAD_SHIFT
range 13 15
default "15" if PPC_256K_PAGES
default "14" if PPC64
- default "14" if KASAN
default "13"
help
Used to define the stack size. The default is almost always what you
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 125328d1b980..af58f1ed3952 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -14,10 +14,16 @@
#ifdef __KERNEL__
-#if defined(CONFIG_VMAP_STACK) && CONFIG_THREAD_SHIFT < PAGE_SHIFT
+#ifdef CONFIG_KASAN
+#define MIN_THREAD_SHIFT (CONFIG_THREAD_SHIFT + 1)
+#else
+#define MIN_THREAD_SHIFT CONFIG_THREAD_SHIFT
+#endif
+
+#if defined(CONFIG_VMAP_STACK) && MIN_THREAD_SHIFT < PAGE_SHIFT
#define THREAD_SHIFT PAGE_SHIFT
#else
-#define THREAD_SHIFT CONFIG_THREAD_SHIFT
+#define THREAD_SHIFT MIN_THREAD_SHIFT
#endif
#define THREAD_SIZE (1 << THREAD_SHIFT)
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 2e2a2a9bcf43..f91f0f29a566 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -37,6 +37,8 @@ KASAN_SANITIZE_paca.o := n
KASAN_SANITIZE_setup_64.o := n
KASAN_SANITIZE_mce.o := n
KASAN_SANITIZE_mce_power.o := n
+KASAN_SANITIZE_udbg.o := n
+KASAN_SANITIZE_udbg_16550.o := n
# we have to be particularly careful in ppc64 to exclude code that
# runs with translations off, as we cannot access the shadow with
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index b62046bf3bb8..ee0433809621 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -2158,12 +2158,12 @@ static unsigned long ___get_wchan(struct task_struct *p)
return 0;
do {
- sp = *(unsigned long *)sp;
+ sp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD) ||
task_is_running(p))
return 0;
if (count > 0) {
- ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+ ip = READ_ONCE_NOCHECK(((unsigned long *)sp)[STACK_FRAME_LR_SAVE]);
if (!in_sched_functions(ip))
return ip;
}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-fpu.c b/arch/powerpc/kernel/ptrace/ptrace-fpu.c
index 5dca19361316..09c49632bfe5 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-fpu.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-fpu.c
@@ -17,9 +17,13 @@ int ptrace_get_fpr(struct task_struct *child, int index, unsigned long *data)
#ifdef CONFIG_PPC_FPU_REGS
flush_fp_to_thread(child);
- if (fpidx < (PT_FPSCR - PT_FPR0))
- memcpy(data, &child->thread.TS_FPR(fpidx), sizeof(long));
- else
+ if (fpidx < (PT_FPSCR - PT_FPR0)) {
+ if (IS_ENABLED(CONFIG_PPC32))
+ // On 32-bit the index we are passed refers to 32-bit words
+ *data = ((u32 *)child->thread.fp_state.fpr)[fpidx];
+ else
+ memcpy(data, &child->thread.TS_FPR(fpidx), sizeof(long));
+ } else
*data = child->thread.fp_state.fpscr;
#else
*data = 0;
@@ -39,9 +43,13 @@ int ptrace_put_fpr(struct task_struct *child, int index, unsigned long data)
#ifdef CONFIG_PPC_FPU_REGS
flush_fp_to_thread(child);
- if (fpidx < (PT_FPSCR - PT_FPR0))
- memcpy(&child->thread.TS_FPR(fpidx), &data, sizeof(long));
- else
+ if (fpidx < (PT_FPSCR - PT_FPR0)) {
+ if (IS_ENABLED(CONFIG_PPC32))
+ // On 32-bit the index we are passed refers to 32-bit words
+ ((u32 *)child->thread.fp_state.fpr)[fpidx] = data;
+ else
+ memcpy(&child->thread.TS_FPR(fpidx), &data, sizeof(long));
+ } else
child->thread.fp_state.fpscr = data;
#endif
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 4d2dc22d4a2d..5d7a72b41ae7 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -444,4 +444,7 @@ void __init pt_regs_check(void)
* real registers.
*/
BUILD_BUG_ON(PT_DSCR < sizeof(struct user_pt_regs) / sizeof(unsigned long));
+
+ // ptrace_get/put_fpr() rely on PPC32 and VSX being incompatible
+ BUILD_BUG_ON(IS_ENABLED(CONFIG_PPC32) && IS_ENABLED(CONFIG_VSX));
}
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 9bb43aa53d43..a6fce3106e02 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -993,8 +993,8 @@ int rtas_call_reentrant(int token, int nargs, int nret, int *outputs, ...)
*
* Return: A pointer to the specified errorlog or NULL if not found.
*/
-struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
- uint16_t section_id)
+noinstr struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
+ uint16_t section_id)
{
struct rtas_ext_event_log_v6 *ext_log =
(struct rtas_ext_event_log_v6 *)log->buffer;
diff --git a/arch/powerpc/kexec/crash.c b/arch/powerpc/kexec/crash.c
index d85fa9fc6f3c..80f54723cf6d 100644
--- a/arch/powerpc/kexec/crash.c
+++ b/arch/powerpc/kexec/crash.c
@@ -224,7 +224,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
/* wait for all the CPUs to hit real mode but timeout if they don't come in */
#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
-static void __maybe_unused crash_kexec_wait_realmode(int cpu)
+noinstr static void __maybe_unused crash_kexec_wait_realmode(int cpu)
{
unsigned int msecs;
int i;
diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c
index 1f3f9fedf1bc..0d04f9d5da8d 100644
--- a/arch/powerpc/mm/nohash/kaslr_booke.c
+++ b/arch/powerpc/mm/nohash/kaslr_booke.c
@@ -19,7 +19,6 @@
#include <asm/cacheflush.h>
#include <asm/kdump.h>
#include <mm/mmu_decl.h>
-#include <generated/compile.h>
#include <generated/utsrelease.h>
struct regions {
@@ -37,10 +36,6 @@ struct regions {
int reserved_mem_size_cells;
};
-/* Simplified build-specific string for starting entropy. */
-static const char build_str[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@"
- LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION;
-
struct regions __initdata regions;
static __init void kaslr_get_cmdline(void *fdt)
@@ -71,7 +66,8 @@ static unsigned long __init get_boot_seed(void *fdt)
{
unsigned long hash = 0;
- hash = rotate_xor(hash, build_str, sizeof(build_str));
+ /* build-specific string for starting entropy. */
+ hash = rotate_xor(hash, linux_banner, strlen(linux_banner));
hash = rotate_xor(hash, fdt, fdt_totalsize(fdt));
return hash;
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 6488b3842199..19f0fc5c6f1b 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -4,6 +4,7 @@
# in particular, idle code runs a bunch of things in real mode
KASAN_SANITIZE_idle.o := n
KASAN_SANITIZE_pci-ioda.o := n
+KASAN_SANITIZE_pci-ioda-tce.o := n
# pnv_machine_check_early
KASAN_SANITIZE_setup.o := n
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 181b855b3050..82cae08976bc 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -465,6 +465,9 @@ static int papr_scm_pmu_check_events(struct papr_scm_priv *p, struct nvdimm_pmu
u32 available_events;
int index, rc = 0;
+ if (!p->stat_buffer_len)
+ return -ENOENT;
+
available_events = (p->stat_buffer_len - sizeof(struct papr_scm_perf_stats))
/ sizeof(struct papr_scm_perf_stat);
if (available_events == 0)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c22f58155948..32ffef9f6e5b 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -364,8 +364,13 @@ config RISCV_ISA_SVPBMT
select RISCV_ALTERNATIVE
default y
help
- Adds support to dynamically detect the presence of the SVPBMT extension
- (Supervisor-mode: page-based memory types) and enable its usage.
+ Adds support to dynamically detect the presence of the SVPBMT
+ ISA-extension (Supervisor-mode: page-based memory types) and
+ enable its usage.
+
+ The memory type for a page contains a combination of attributes
+ that indicate the cacheability, idempotency, and ordering
+ properties for access to that page.
The SVPBMT extension is only available on 64Bit cpus.
diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas
index ebfcd5cc6eaf..457ac72c9b36 100644
--- a/arch/riscv/Kconfig.erratas
+++ b/arch/riscv/Kconfig.erratas
@@ -35,6 +35,7 @@ config ERRATA_SIFIVE_CIP_1200
config ERRATA_THEAD
bool "T-HEAD errata"
+ depends on !XIP_KERNEL
select RISCV_ALTERNATIVE
help
All T-HEAD errata Kconfig depend on this Kconfig. Disabling
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 8c3259134194..3095d08453a1 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -192,6 +192,15 @@
riscv,ndev = <186>;
};
+ pdma: dma-controller@3000000 {
+ compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+ reg = <0x0 0x3000000 0x0 0x8000>;
+ interrupt-parent = <&plic>;
+ interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
+ dma-channels = <4>;
+ #dma-cells = <1>;
+ };
+
clkcfg: clkcfg@20002000 {
compatible = "microchip,mpfs-clkcfg";
reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index 9e2888dbb5b1..416ead0f9a65 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -75,20 +75,20 @@ asm volatile(ALTERNATIVE( \
"nop\n\t" \
"nop\n\t" \
"nop", \
- "li t3, %2\n\t" \
- "slli t3, t3, %4\n\t" \
+ "li t3, %1\n\t" \
+ "slli t3, t3, %3\n\t" \
"and t3, %0, t3\n\t" \
"bne t3, zero, 2f\n\t" \
- "li t3, %3\n\t" \
- "slli t3, t3, %4\n\t" \
+ "li t3, %2\n\t" \
+ "slli t3, t3, %3\n\t" \
"or %0, %0, t3\n\t" \
"2:", THEAD_VENDOR_ID, \
ERRATA_THEAD_PBMT, CONFIG_ERRATA_THEAD_PBMT) \
: "+r"(_val) \
- : "0"(_val), \
- "I"(_PAGE_MTMASK_THEAD >> ALT_THEAD_PBMT_SHIFT), \
+ : "I"(_PAGE_MTMASK_THEAD >> ALT_THEAD_PBMT_SHIFT), \
"I"(_PAGE_PMA_THEAD >> ALT_THEAD_PBMT_SHIFT), \
- "I"(ALT_THEAD_PBMT_SHIFT))
+ "I"(ALT_THEAD_PBMT_SHIFT) \
+ : "t3")
#else
#define ALT_THEAD_PMA(_val)
#endif
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index a6f62a6d1edd..12b05ce164bb 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -293,7 +293,6 @@ void __init_or_module riscv_cpufeature_patch_func(struct alt_entry *begin,
unsigned int stage)
{
u32 cpu_req_feature = cpufeature_probe(stage);
- u32 cpu_apply_feature = 0;
struct alt_entry *alt;
u32 tmp;
@@ -307,10 +306,8 @@ void __init_or_module riscv_cpufeature_patch_func(struct alt_entry *begin,
}
tmp = (1U << alt->errata_id);
- if (cpu_req_feature & tmp) {
+ if (cpu_req_feature & tmp)
patch_text_nosync(alt->old_ptr, alt->alt_ptr, alt->alt_len);
- cpu_apply_feature |= tmp;
- }
}
}
#endif
diff --git a/arch/riscv/kvm/vmid.c b/arch/riscv/kvm/vmid.c
index 9f764df125db..6cd93995fb65 100644
--- a/arch/riscv/kvm/vmid.c
+++ b/arch/riscv/kvm/vmid.c
@@ -97,7 +97,7 @@ void kvm_riscv_gstage_vmid_update(struct kvm_vcpu *vcpu)
* We ran out of VMIDs so we increment vmid_version and
* start assigning VMIDs from 1.
*
- * This also means existing VMIDs assignement to all Guest
+ * This also means existing VMIDs assignment to all Guest
* instances is invalid and we have force VMID re-assignement
* for all Guest instances. The Guest instances that were not
* running will automatically pick-up new VMIDs because will
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index b1a88f6cc349..91c0b80a8bf0 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -125,6 +125,7 @@ config S390
select CLONE_BACKWARDS2
select DMA_OPS if PCI
select DYNAMIC_FTRACE if FUNCTION_TRACER
+ select GCC12_NO_ARRAY_BOUNDS
select GENERIC_ALLOCATOR
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
@@ -768,7 +769,6 @@ menu "Virtualization"
config PROTECTED_VIRTUALIZATION_GUEST
def_bool n
prompt "Protected virtualization guest support"
- select ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS
help
Select this option, if you want to be able to run this
kernel as a protected virtualization KVM guest.
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index d73611b35164..495c68a4df1e 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -32,15 +32,7 @@ KBUILD_CFLAGS_DECOMPRESSOR += -fno-stack-protector
KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, address-of-packed-member)
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g)
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,))
-
-ifdef CONFIG_CC_IS_GCC
- ifeq ($(call cc-ifversion, -ge, 1200, y), y)
- ifeq ($(call cc-ifversion, -lt, 1300, y), y)
- KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
- KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, array-bounds)
- endif
- endif
-endif
+KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds)
UTS_MACHINE := s390x
STACK_SIZE := $(if $(CONFIG_KASAN),65536,16384)
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index a2c1c55daec0..28124d0fa1d5 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -219,6 +219,11 @@ ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize,
unsigned long src;
int rc;
+ if (!(iter_is_iovec(iter) || iov_iter_is_kvec(iter)))
+ return -EINVAL;
+ /* Multi-segment iterators are not supported */
+ if (iter->nr_segs > 1)
+ return -EINVAL;
if (!csize)
return 0;
src = pfn_to_phys(pfn) + offset;
@@ -228,7 +233,10 @@ ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, size_t csize,
rc = copy_oldmem_user(iter->iov->iov_base, src, csize);
else
rc = copy_oldmem_kernel(iter->kvec->iov_base, src, csize);
- return rc;
+ if (rc < 0)
+ return rc;
+ iov_iter_advance(iter, csize);
+ return csize;
}
/*
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 483ab5e10164..f7dd3c849e68 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -516,6 +516,26 @@ static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
return err;
}
+/* Events CPU_CYLCES and INSTRUCTIONS can be submitted with two different
+ * attribute::type values:
+ * - PERF_TYPE_HARDWARE:
+ * - pmu->type:
+ * Handle both type of invocations identical. They address the same hardware.
+ * The result is different when event modifiers exclude_kernel and/or
+ * exclude_user are also set.
+ */
+static int cpumf_pmu_event_type(struct perf_event *event)
+{
+ u64 ev = event->attr.config;
+
+ if (cpumf_generic_events_basic[PERF_COUNT_HW_CPU_CYCLES] == ev ||
+ cpumf_generic_events_basic[PERF_COUNT_HW_INSTRUCTIONS] == ev ||
+ cpumf_generic_events_user[PERF_COUNT_HW_CPU_CYCLES] == ev ||
+ cpumf_generic_events_user[PERF_COUNT_HW_INSTRUCTIONS] == ev)
+ return PERF_TYPE_HARDWARE;
+ return PERF_TYPE_RAW;
+}
+
static int cpumf_pmu_event_init(struct perf_event *event)
{
unsigned int type = event->attr.type;
@@ -525,7 +545,7 @@ static int cpumf_pmu_event_init(struct perf_event *event)
err = __hw_perf_event_init(event, type);
else if (event->pmu->type == type)
/* Registered as unknown PMU */
- err = __hw_perf_event_init(event, PERF_TYPE_RAW);
+ err = __hw_perf_event_init(event, cpumf_pmu_event_type(event));
else
return -ENOENT;
diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c
index 8c1545946d85..b38b4ae01589 100644
--- a/arch/s390/kernel/perf_pai_crypto.c
+++ b/arch/s390/kernel/perf_pai_crypto.c
@@ -193,8 +193,9 @@ static int paicrypt_event_init(struct perf_event *event)
/* PAI crypto PMU registered as PERF_TYPE_RAW, check event type */
if (a->type != PERF_TYPE_RAW && event->pmu->type != a->type)
return -ENOENT;
- /* PAI crypto event must be valid */
- if (a->config > PAI_CRYPTO_BASE + paicrypt_cnt)
+ /* PAI crypto event must be in valid range */
+ if (a->config < PAI_CRYPTO_BASE ||
+ a->config > PAI_CRYPTO_BASE + paicrypt_cnt)
return -EINVAL;
/* Allow only CPU wide operation, no process context for now. */
if (event->hw.target || event->cpu == -1)
@@ -208,6 +209,12 @@ static int paicrypt_event_init(struct perf_event *event)
if (rc)
return rc;
+ /* Event initialization sets last_tag to 0. When later on the events
+ * are deleted and re-added, do not reset the event count value to zero.
+ * Events are added, deleted and re-added when 2 or more events
+ * are active at the same time.
+ */
+ event->hw.last_tag = 0;
cpump->event = event;
event->destroy = paicrypt_event_destroy;
@@ -242,9 +249,12 @@ static void paicrypt_start(struct perf_event *event, int flags)
{
u64 sum;
- sum = paicrypt_getall(event); /* Get current value */
- local64_set(&event->hw.prev_count, sum);
- local64_set(&event->count, 0);
+ if (!event->hw.last_tag) {
+ event->hw.last_tag = 1;
+ sum = paicrypt_getall(event); /* Get current value */
+ local64_set(&event->count, 0);
+ local64_set(&event->hw.prev_count, sum);
+ }
}
static int paicrypt_add(struct perf_event *event, int flags)
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 6fb6bf64326f..6a0ac00d5a42 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -31,6 +31,7 @@
#include <linux/cma.h>
#include <linux/gfp.h>
#include <linux/dma-direct.h>
+#include <linux/platform-feature.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/pgalloc.h>
@@ -168,22 +169,14 @@ bool force_dma_unencrypted(struct device *dev)
return is_prot_virt_guest();
}
-#ifdef CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS
-
-int arch_has_restricted_virtio_memory_access(void)
-{
- return is_prot_virt_guest();
-}
-EXPORT_SYMBOL(arch_has_restricted_virtio_memory_access);
-
-#endif
-
/* protected virtualization */
static void pv_init(void)
{
if (!is_prot_virt_guest())
return;
+ platform_set(PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS);
+
/* make sure bounce buffers are shared */
swiotlb_init(true, SWIOTLB_FORCE | SWIOTLB_VERBOSE);
swiotlb_update_mem_attributes();
diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c
index 5c092a9153ea..027847023184 100644
--- a/arch/um/drivers/virt-pci.c
+++ b/arch/um/drivers/virt-pci.c
@@ -544,6 +544,8 @@ static int um_pci_init_vqs(struct um_pci_device *dev)
dev->cmd_vq = vqs[0];
dev->irq_vq = vqs[1];
+ virtio_device_ready(dev->vdev);
+
for (i = 0; i < NUM_IRQ_MSGS; i++) {
void *msg = kzalloc(MAX_IRQ_MSG_SIZE, GFP_KERNEL);
@@ -587,7 +589,7 @@ static int um_pci_virtio_probe(struct virtio_device *vdev)
dev->irq = irq_alloc_desc(numa_node_id());
if (dev->irq < 0) {
err = dev->irq;
- goto error;
+ goto err_reset;
}
um_pci_devices[free].dev = dev;
vdev->priv = dev;
@@ -604,6 +606,9 @@ static int um_pci_virtio_probe(struct virtio_device *vdev)
um_pci_rescan();
return 0;
+err_reset:
+ virtio_reset_device(vdev);
+ vdev->config->del_vqs(vdev);
error:
mutex_unlock(&um_pci_mtx);
kfree(dev);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9783ebc4e021..be0b95e51df6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1542,7 +1542,6 @@ config X86_CPA_STATISTICS
config X86_MEM_ENCRYPT
select ARCH_HAS_FORCE_DMA_UNENCRYPTED
select DYNAMIC_PHYSICAL_MASK
- select ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS
def_bool n
config AMD_MEM_ENCRYPT
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index 03deb4d6920d..928dcf7a20d9 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -124,6 +124,51 @@ static u64 get_cc_mask(void)
return BIT_ULL(gpa_width - 1);
}
+/*
+ * The TDX module spec states that #VE may be injected for a limited set of
+ * reasons:
+ *
+ * - Emulation of the architectural #VE injection on EPT violation;
+ *
+ * - As a result of guest TD execution of a disallowed instruction,
+ * a disallowed MSR access, or CPUID virtualization;
+ *
+ * - A notification to the guest TD about anomalous behavior;
+ *
+ * The last one is opt-in and is not used by the kernel.
+ *
+ * The Intel Software Developer's Manual describes cases when instruction
+ * length field can be used in section "Information for VM Exits Due to
+ * Instruction Execution".
+ *
+ * For TDX, it ultimately means GET_VEINFO provides reliable instruction length
+ * information if #VE occurred due to instruction execution, but not for EPT
+ * violations.
+ */
+static int ve_instr_len(struct ve_info *ve)
+{
+ switch (ve->exit_reason) {
+ case EXIT_REASON_HLT:
+ case EXIT_REASON_MSR_READ:
+ case EXIT_REASON_MSR_WRITE:
+ case EXIT_REASON_CPUID:
+ case EXIT_REASON_IO_INSTRUCTION:
+ /* It is safe to use ve->instr_len for #VE due instructions */
+ return ve->instr_len;
+ case EXIT_REASON_EPT_VIOLATION:
+ /*
+ * For EPT violations, ve->insn_len is not defined. For those,
+ * the kernel must decode instructions manually and should not
+ * be using this function.
+ */
+ WARN_ONCE(1, "ve->instr_len is not defined for EPT violations");
+ return 0;
+ default:
+ WARN_ONCE(1, "Unexpected #VE-type: %lld\n", ve->exit_reason);
+ return ve->instr_len;
+ }
+}
+
static u64 __cpuidle __halt(const bool irq_disabled, const bool do_sti)
{
struct tdx_hypercall_args args = {
@@ -147,7 +192,7 @@ static u64 __cpuidle __halt(const bool irq_disabled, const bool do_sti)
return __tdx_hypercall(&args, do_sti ? TDX_HCALL_ISSUE_STI : 0);
}
-static bool handle_halt(void)
+static int handle_halt(struct ve_info *ve)
{
/*
* Since non safe halt is mainly used in CPU offlining
@@ -158,9 +203,9 @@ static bool handle_halt(void)
const bool do_sti = false;
if (__halt(irq_disabled, do_sti))
- return false;
+ return -EIO;
- return true;
+ return ve_instr_len(ve);
}
void __cpuidle tdx_safe_halt(void)
@@ -180,7 +225,7 @@ void __cpuidle tdx_safe_halt(void)
WARN_ONCE(1, "HLT instruction emulation failed\n");
}
-static bool read_msr(struct pt_regs *regs)
+static int read_msr(struct pt_regs *regs, struct ve_info *ve)
{
struct tdx_hypercall_args args = {
.r10 = TDX_HYPERCALL_STANDARD,
@@ -194,14 +239,14 @@ static bool read_msr(struct pt_regs *regs)
* (GHCI), section titled "TDG.VP.VMCALL<Instruction.RDMSR>".
*/
if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
- return false;
+ return -EIO;
regs->ax = lower_32_bits(args.r11);
regs->dx = upper_32_bits(args.r11);
- return true;
+ return ve_instr_len(ve);
}
-static bool write_msr(struct pt_regs *regs)
+static int write_msr(struct pt_regs *regs, struct ve_info *ve)
{
struct tdx_hypercall_args args = {
.r10 = TDX_HYPERCALL_STANDARD,
@@ -215,10 +260,13 @@ static bool write_msr(struct pt_regs *regs)
* can be found in TDX Guest-Host-Communication Interface
* (GHCI) section titled "TDG.VP.VMCALL<Instruction.WRMSR>".
*/
- return !__tdx_hypercall(&args, 0);
+ if (__tdx_hypercall(&args, 0))
+ return -EIO;
+
+ return ve_instr_len(ve);
}
-static bool handle_cpuid(struct pt_regs *regs)
+static int handle_cpuid(struct pt_regs *regs, struct ve_info *ve)
{
struct tdx_hypercall_args args = {
.r10 = TDX_HYPERCALL_STANDARD,
@@ -236,7 +284,7 @@ static bool handle_cpuid(struct pt_regs *regs)
*/
if (regs->ax < 0x40000000 || regs->ax > 0x4FFFFFFF) {
regs->ax = regs->bx = regs->cx = regs->dx = 0;
- return true;
+ return ve_instr_len(ve);
}
/*
@@ -245,7 +293,7 @@ static bool handle_cpuid(struct pt_regs *regs)
* (GHCI), section titled "VP.VMCALL<Instruction.CPUID>".
*/
if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
- return false;
+ return -EIO;
/*
* As per TDX GHCI CPUID ABI, r12-r15 registers contain contents of
@@ -257,7 +305,7 @@ static bool handle_cpuid(struct pt_regs *regs)
regs->cx = args.r14;
regs->dx = args.r15;
- return true;
+ return ve_instr_len(ve);
}
static bool mmio_read(int size, unsigned long addr, unsigned long *val)
@@ -283,10 +331,10 @@ static bool mmio_write(int size, unsigned long addr, unsigned long val)
EPT_WRITE, addr, val);
}
-static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
+static int handle_mmio(struct pt_regs *regs, struct ve_info *ve)
{
+ unsigned long *reg, val, vaddr;
char buffer[MAX_INSN_SIZE];
- unsigned long *reg, val;
struct insn insn = {};
enum mmio_type mmio;
int size, extend_size;
@@ -294,34 +342,49 @@ static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
/* Only in-kernel MMIO is supported */
if (WARN_ON_ONCE(user_mode(regs)))
- return false;
+ return -EFAULT;
if (copy_from_kernel_nofault(buffer, (void *)regs->ip, MAX_INSN_SIZE))
- return false;
+ return -EFAULT;
if (insn_decode(&insn, buffer, MAX_INSN_SIZE, INSN_MODE_64))
- return false;
+ return -EINVAL;
mmio = insn_decode_mmio(&insn, &size);
if (WARN_ON_ONCE(mmio == MMIO_DECODE_FAILED))
- return false;
+ return -EINVAL;
if (mmio != MMIO_WRITE_IMM && mmio != MMIO_MOVS) {
reg = insn_get_modrm_reg_ptr(&insn, regs);
if (!reg)
- return false;
+ return -EINVAL;
}
- ve->instr_len = insn.length;
+ /*
+ * Reject EPT violation #VEs that split pages.
+ *
+ * MMIO accesses are supposed to be naturally aligned and therefore
+ * never cross page boundaries. Seeing split page accesses indicates
+ * a bug or a load_unaligned_zeropad() that stepped into an MMIO page.
+ *
+ * load_unaligned_zeropad() will recover using exception fixups.
+ */
+ vaddr = (unsigned long)insn_get_addr_ref(&insn, regs);
+ if (vaddr / PAGE_SIZE != (vaddr + size - 1) / PAGE_SIZE)
+ return -EFAULT;
/* Handle writes first */
switch (mmio) {
case MMIO_WRITE:
memcpy(&val, reg, size);
- return mmio_write(size, ve->gpa, val);
+ if (!mmio_write(size, ve->gpa, val))
+ return -EIO;
+ return insn.length;
case MMIO_WRITE_IMM:
val = insn.immediate.value;
- return mmio_write(size, ve->gpa, val);
+ if (!mmio_write(size, ve->gpa, val))
+ return -EIO;
+ return insn.length;
case MMIO_READ:
case MMIO_READ_ZERO_EXTEND:
case MMIO_READ_SIGN_EXTEND:
@@ -334,15 +397,15 @@ static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
* decoded or handled properly. It was likely not using io.h
* helpers or accessed MMIO accidentally.
*/
- return false;
+ return -EINVAL;
default:
WARN_ONCE(1, "Unknown insn_decode_mmio() decode value?");
- return false;
+ return -EINVAL;
}
/* Handle reads */
if (!mmio_read(size, ve->gpa, &val))
- return false;
+ return -EIO;
switch (mmio) {
case MMIO_READ:
@@ -364,13 +427,13 @@ static bool handle_mmio(struct pt_regs *regs, struct ve_info *ve)
default:
/* All other cases has to be covered with the first switch() */
WARN_ON_ONCE(1);
- return false;
+ return -EINVAL;
}
if (extend_size)
memset(reg, extend_val, extend_size);
memcpy(reg, &val, size);
- return true;
+ return insn.length;
}
static bool handle_in(struct pt_regs *regs, int size, int port)
@@ -421,13 +484,14 @@ static bool handle_out(struct pt_regs *regs, int size, int port)
*
* Return True on success or False on failure.
*/
-static bool handle_io(struct pt_regs *regs, u32 exit_qual)
+static int handle_io(struct pt_regs *regs, struct ve_info *ve)
{
+ u32 exit_qual = ve->exit_qual;
int size, port;
- bool in;
+ bool in, ret;
if (VE_IS_IO_STRING(exit_qual))
- return false;
+ return -EIO;
in = VE_IS_IO_IN(exit_qual);
size = VE_GET_IO_SIZE(exit_qual);
@@ -435,9 +499,13 @@ static bool handle_io(struct pt_regs *regs, u32 exit_qual)
if (in)
- return handle_in(regs, size, port);
+ ret = handle_in(regs, size, port);
else
- return handle_out(regs, size, port);
+ ret = handle_out(regs, size, port);
+ if (!ret)
+ return -EIO;
+
+ return ve_instr_len(ve);
}
/*
@@ -447,13 +515,19 @@ static bool handle_io(struct pt_regs *regs, u32 exit_qual)
__init bool tdx_early_handle_ve(struct pt_regs *regs)
{
struct ve_info ve;
+ int insn_len;
tdx_get_ve_info(&ve);
if (ve.exit_reason != EXIT_REASON_IO_INSTRUCTION)
return false;
- return handle_io(regs, ve.exit_qual);
+ insn_len = handle_io(regs, &ve);
+ if (insn_len < 0)
+ return false;
+
+ regs->ip += insn_len;
+ return true;
}
void tdx_get_ve_info(struct ve_info *ve)
@@ -486,54 +560,65 @@ void tdx_get_ve_info(struct ve_info *ve)
ve->instr_info = upper_32_bits(out.r10);
}
-/* Handle the user initiated #VE */
-static bool virt_exception_user(struct pt_regs *regs, struct ve_info *ve)
+/*
+ * Handle the user initiated #VE.
+ *
+ * On success, returns the number of bytes RIP should be incremented (>=0)
+ * or -errno on error.
+ */
+static int virt_exception_user(struct pt_regs *regs, struct ve_info *ve)
{
switch (ve->exit_reason) {
case EXIT_REASON_CPUID:
- return handle_cpuid(regs);
+ return handle_cpuid(regs, ve);
default:
pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
- return false;
+ return -EIO;
}
}
-/* Handle the kernel #VE */
-static bool virt_exception_kernel(struct pt_regs *regs, struct ve_info *ve)
+/*
+ * Handle the kernel #VE.
+ *
+ * On success, returns the number of bytes RIP should be incremented (>=0)
+ * or -errno on error.
+ */
+static int virt_exception_kernel(struct pt_regs *regs, struct ve_info *ve)
{
switch (ve->exit_reason) {
case EXIT_REASON_HLT:
- return handle_halt();
+ return handle_halt(ve);
case EXIT_REASON_MSR_READ:
- return read_msr(regs);
+ return read_msr(regs, ve);
case EXIT_REASON_MSR_WRITE:
- return write_msr(regs);
+ return write_msr(regs, ve);
case EXIT_REASON_CPUID:
- return handle_cpuid(regs);
+ return handle_cpuid(regs, ve);
case EXIT_REASON_EPT_VIOLATION:
return handle_mmio(regs, ve);
case EXIT_REASON_IO_INSTRUCTION:
- return handle_io(regs, ve->exit_qual);
+ return handle_io(regs, ve);
default:
pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
- return false;
+ return -EIO;
}
}
bool tdx_handle_virt_exception(struct pt_regs *regs, struct ve_info *ve)
{
- bool ret;
+ int insn_len;
if (user_mode(regs))
- ret = virt_exception_user(regs, ve);
+ insn_len = virt_exception_user(regs, ve);
else
- ret = virt_exception_kernel(regs, ve);
+ insn_len = virt_exception_kernel(regs, ve);
+ if (insn_len < 0)
+ return false;
/* After successful #VE handling, move the IP */
- if (ret)
- regs->ip += ve->instr_len;
+ regs->ip += insn_len;
- return ret;
+ return true;
}
static bool tdx_tlb_flush_required(bool private)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 8b392b6b7b93..3de6d8b53367 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <asm/apic.h>
#include <asm/desc.h>
+#include <asm/sev.h>
#include <asm/hypervisor.h>
#include <asm/hyperv-tlfs.h>
#include <asm/mshyperv.h>
@@ -405,6 +406,11 @@ void __init hyperv_init(void)
}
if (hv_isolation_type_snp()) {
+ /* Negotiate GHCB Version. */
+ if (!hv_ghcb_negotiate_protocol())
+ hv_ghcb_terminate(SEV_TERM_SET_GEN,
+ GHCB_SEV_ES_PROT_UNSUPPORTED);
+
hv_ghcb_pg = alloc_percpu(union hv_ghcb *);
if (!hv_ghcb_pg)
goto free_vp_assist_page;
diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
index 2b994117581e..1dbcbd9da74d 100644
--- a/arch/x86/hyperv/ivm.c
+++ b/arch/x86/hyperv/ivm.c
@@ -53,6 +53,8 @@ union hv_ghcb {
} hypercall;
} __packed __aligned(HV_HYP_PAGE_SIZE);
+static u16 hv_ghcb_version __ro_after_init;
+
u64 hv_ghcb_hypercall(u64 control, void *input, void *output, u32 input_size)
{
union hv_ghcb *hv_ghcb;
@@ -96,12 +98,85 @@ u64 hv_ghcb_hypercall(u64 control, void *input, void *output, u32 input_size)
return status;
}
+static inline u64 rd_ghcb_msr(void)
+{
+ return __rdmsr(MSR_AMD64_SEV_ES_GHCB);
+}
+
+static inline void wr_ghcb_msr(u64 val)
+{
+ native_wrmsrl(MSR_AMD64_SEV_ES_GHCB, val);
+}
+
+static enum es_result hv_ghcb_hv_call(struct ghcb *ghcb, u64 exit_code,
+ u64 exit_info_1, u64 exit_info_2)
+{
+ /* Fill in protocol and format specifiers */
+ ghcb->protocol_version = hv_ghcb_version;
+ ghcb->ghcb_usage = GHCB_DEFAULT_USAGE;
+
+ ghcb_set_sw_exit_code(ghcb, exit_code);
+ ghcb_set_sw_exit_info_1(ghcb, exit_info_1);
+ ghcb_set_sw_exit_info_2(ghcb, exit_info_2);
+
+ VMGEXIT();
+
+ if (ghcb->save.sw_exit_info_1 & GENMASK_ULL(31, 0))
+ return ES_VMM_ERROR;
+ else
+ return ES_OK;
+}
+
+void hv_ghcb_terminate(unsigned int set, unsigned int reason)
+{
+ u64 val = GHCB_MSR_TERM_REQ;
+
+ /* Tell the hypervisor what went wrong. */
+ val |= GHCB_SEV_TERM_REASON(set, reason);
+
+ /* Request Guest Termination from Hypvervisor */
+ wr_ghcb_msr(val);
+ VMGEXIT();
+
+ while (true)
+ asm volatile("hlt\n" : : : "memory");
+}
+
+bool hv_ghcb_negotiate_protocol(void)
+{
+ u64 ghcb_gpa;
+ u64 val;
+
+ /* Save ghcb page gpa. */
+ ghcb_gpa = rd_ghcb_msr();
+
+ /* Do the GHCB protocol version negotiation */
+ wr_ghcb_msr(GHCB_MSR_SEV_INFO_REQ);
+ VMGEXIT();
+ val = rd_ghcb_msr();
+
+ if (GHCB_MSR_INFO(val) != GHCB_MSR_SEV_INFO_RESP)
+ return false;
+
+ if (GHCB_MSR_PROTO_MAX(val) < GHCB_PROTOCOL_MIN ||
+ GHCB_MSR_PROTO_MIN(val) > GHCB_PROTOCOL_MAX)
+ return false;
+
+ hv_ghcb_version = min_t(size_t, GHCB_MSR_PROTO_MAX(val),
+ GHCB_PROTOCOL_MAX);
+
+ /* Write ghcb page back after negotiating protocol. */
+ wr_ghcb_msr(ghcb_gpa);
+ VMGEXIT();
+
+ return true;
+}
+
void hv_ghcb_msr_write(u64 msr, u64 value)
{
union hv_ghcb *hv_ghcb;
void **ghcb_base;
unsigned long flags;
- struct es_em_ctxt ctxt;
if (!hv_ghcb_pg)
return;
@@ -120,8 +195,7 @@ void hv_ghcb_msr_write(u64 msr, u64 value)
ghcb_set_rax(&hv_ghcb->ghcb, lower_32_bits(value));
ghcb_set_rdx(&hv_ghcb->ghcb, upper_32_bits(value));
- if (sev_es_ghcb_hv_call(&hv_ghcb->ghcb, false, &ctxt,
- SVM_EXIT_MSR, 1, 0))
+ if (hv_ghcb_hv_call(&hv_ghcb->ghcb, SVM_EXIT_MSR, 1, 0))
pr_warn("Fail to write msr via ghcb %llx.\n", msr);
local_irq_restore(flags);
@@ -133,7 +207,6 @@ void hv_ghcb_msr_read(u64 msr, u64 *value)
union hv_ghcb *hv_ghcb;
void **ghcb_base;
unsigned long flags;
- struct es_em_ctxt ctxt;
/* Check size of union hv_ghcb here. */
BUILD_BUG_ON(sizeof(union hv_ghcb) != HV_HYP_PAGE_SIZE);
@@ -152,8 +225,7 @@ void hv_ghcb_msr_read(u64 msr, u64 *value)
}
ghcb_set_rcx(&hv_ghcb->ghcb, msr);
- if (sev_es_ghcb_hv_call(&hv_ghcb->ghcb, false, &ctxt,
- SVM_EXIT_MSR, 0, 0))
+ if (hv_ghcb_hv_call(&hv_ghcb->ghcb, SVM_EXIT_MSR, 0, 0))
pr_warn("Fail to read msr via ghcb %llx.\n", msr);
else
*value = (u64)lower_32_bits(hv_ghcb->ghcb.save.rax)
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 393f2bbb5e3a..03acc823838a 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -446,5 +446,6 @@
#define X86_BUG_TAA X86_BUG(22) /* CPU is affected by TSX Async Abort(TAA) */
#define X86_BUG_ITLB_MULTIHIT X86_BUG(23) /* CPU may incur MCE during certain page attribute changes */
#define X86_BUG_SRBDS X86_BUG(24) /* CPU may leak RNG bits if not mitigated */
+#define X86_BUG_MMIO_STALE_DATA X86_BUG(25) /* CPU is affected by Processor MMIO Stale Data vulnerabilities */
#endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/include/asm/e820/api.h b/arch/x86/include/asm/e820/api.h
index 5a39ed59b6db..e8f58ddd06d9 100644
--- a/arch/x86/include/asm/e820/api.h
+++ b/arch/x86/include/asm/e820/api.h
@@ -4,9 +4,6 @@
#include <asm/e820/types.h>
-struct device;
-struct resource;
-
extern struct e820_table *e820_table;
extern struct e820_table *e820_table_kexec;
extern struct e820_table *e820_table_firmware;
@@ -46,8 +43,6 @@ extern void e820__register_nosave_regions(unsigned long limit_pfn);
extern int e820__get_entry_type(u64 start, u64 end);
-extern void remove_e820_regions(struct device *dev, struct resource *avail);
-
/*
* Returns true iff the specified range [start,end) is completely contained inside
* the ISA region.
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 71943dce691e..9636742a80f2 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -323,7 +323,7 @@ static inline u32 efi64_convert_status(efi_status_t status)
#define __efi64_argmap_get_memory_space_descriptor(phys, desc) \
(__efi64_split(phys), (desc))
-#define __efi64_argmap_set_memory_space_descriptor(phys, size, flags) \
+#define __efi64_argmap_set_memory_space_attributes(phys, size, flags) \
(__efi64_split(phys), __efi64_split(size), __efi64_split(flags))
/*
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 959d66b9be94..9217bd6cf0d1 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -653,6 +653,7 @@ struct kvm_vcpu_arch {
u64 ia32_misc_enable_msr;
u64 smbase;
u64 smi_count;
+ bool at_instruction_boundary;
bool tpr_access_reporting;
bool xsaves_enabled;
bool xfd_no_write_intercept;
@@ -1046,14 +1047,77 @@ struct kvm_x86_msr_filter {
};
enum kvm_apicv_inhibit {
+
+ /********************************************************************/
+ /* INHIBITs that are relevant to both Intel's APICv and AMD's AVIC. */
+ /********************************************************************/
+
+ /*
+ * APIC acceleration is disabled by a module parameter
+ * and/or not supported in hardware.
+ */
APICV_INHIBIT_REASON_DISABLE,
+
+ /*
+ * APIC acceleration is inhibited because AutoEOI feature is
+ * being used by a HyperV guest.
+ */
APICV_INHIBIT_REASON_HYPERV,
+
+ /*
+ * APIC acceleration is inhibited because the userspace didn't yet
+ * enable the kernel/split irqchip.
+ */
+ APICV_INHIBIT_REASON_ABSENT,
+
+ /* APIC acceleration is inhibited because KVM_GUESTDBG_BLOCKIRQ
+ * (out of band, debug measure of blocking all interrupts on this vCPU)
+ * was enabled, to avoid AVIC/APICv bypassing it.
+ */
+ APICV_INHIBIT_REASON_BLOCKIRQ,
+
+ /*
+ * For simplicity, the APIC acceleration is inhibited
+ * first time either APIC ID or APIC base are changed by the guest
+ * from their reset values.
+ */
+ APICV_INHIBIT_REASON_APIC_ID_MODIFIED,
+ APICV_INHIBIT_REASON_APIC_BASE_MODIFIED,
+
+ /******************************************************/
+ /* INHIBITs that are relevant only to the AMD's AVIC. */
+ /******************************************************/
+
+ /*
+ * AVIC is inhibited on a vCPU because it runs a nested guest.
+ *
+ * This is needed because unlike APICv, the peers of this vCPU
+ * cannot use the doorbell mechanism to signal interrupts via AVIC when
+ * a vCPU runs nested.
+ */
APICV_INHIBIT_REASON_NESTED,
+
+ /*
+ * On SVM, the wait for the IRQ window is implemented with pending vIRQ,
+ * which cannot be injected when the AVIC is enabled, thus AVIC
+ * is inhibited while KVM waits for IRQ window.
+ */
APICV_INHIBIT_REASON_IRQWIN,
+
+ /*
+ * PIT (i8254) 're-inject' mode, relies on EOI intercept,
+ * which AVIC doesn't support for edge triggered interrupts.
+ */
APICV_INHIBIT_REASON_PIT_REINJ,
+
+ /*
+ * AVIC is inhibited because the guest has x2apic in its CPUID.
+ */
APICV_INHIBIT_REASON_X2APIC,
- APICV_INHIBIT_REASON_BLOCKIRQ,
- APICV_INHIBIT_REASON_ABSENT,
+
+ /*
+ * AVIC is disabled because SEV doesn't support it.
+ */
APICV_INHIBIT_REASON_SEV,
};
@@ -1300,6 +1364,8 @@ struct kvm_vcpu_stat {
u64 nested_run;
u64 directed_yield_attempted;
u64 directed_yield_successful;
+ u64 preemption_reported;
+ u64 preemption_other;
u64 guest_mode;
};
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index a82f603d4312..61f0c206bff0 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -179,9 +179,13 @@ int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible);
#ifdef CONFIG_AMD_MEM_ENCRYPT
void hv_ghcb_msr_write(u64 msr, u64 value);
void hv_ghcb_msr_read(u64 msr, u64 *value);
+bool hv_ghcb_negotiate_protocol(void);
+void hv_ghcb_terminate(unsigned int set, unsigned int reason);
#else
static inline void hv_ghcb_msr_write(u64 msr, u64 value) {}
static inline void hv_ghcb_msr_read(u64 msr, u64 *value) {}
+static inline bool hv_ghcb_negotiate_protocol(void) { return false; }
+static inline void hv_ghcb_terminate(unsigned int set, unsigned int reason) {}
#endif
extern bool hv_isolation_type_snp(void);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 403e83b4adc8..d27e0581b777 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -116,6 +116,30 @@
* Not susceptible to
* TSX Async Abort (TAA) vulnerabilities.
*/
+#define ARCH_CAP_SBDR_SSDP_NO BIT(13) /*
+ * Not susceptible to SBDR and SSDP
+ * variants of Processor MMIO stale data
+ * vulnerabilities.
+ */
+#define ARCH_CAP_FBSDP_NO BIT(14) /*
+ * Not susceptible to FBSDP variant of
+ * Processor MMIO stale data
+ * vulnerabilities.
+ */
+#define ARCH_CAP_PSDP_NO BIT(15) /*
+ * Not susceptible to PSDP variant of
+ * Processor MMIO stale data
+ * vulnerabilities.
+ */
+#define ARCH_CAP_FB_CLEAR BIT(17) /*
+ * VERW clears CPU fill buffer
+ * even on MDS_NO CPUs.
+ */
+#define ARCH_CAP_FB_CLEAR_CTRL BIT(18) /*
+ * MSR_IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]
+ * bit available to control VERW
+ * behavior.
+ */
#define MSR_IA32_FLUSH_CMD 0x0000010b
#define L1D_FLUSH BIT(0) /*
@@ -133,6 +157,7 @@
#define MSR_IA32_MCU_OPT_CTRL 0x00000123
#define RNGDS_MITG_DIS BIT(0) /* SRBDS support */
#define RTM_ALLOW BIT(1) /* TSX development mode */
+#define FB_CLEAR_DIS BIT(3) /* CPU Fill buffer clear disable */
#define MSR_IA32_SYSENTER_CS 0x00000174
#define MSR_IA32_SYSENTER_ESP 0x00000175
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index acbaeaf83b61..da251a5645b0 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -269,6 +269,8 @@ DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
DECLARE_STATIC_KEY_FALSE(switch_mm_cond_l1d_flush);
+DECLARE_STATIC_KEY_FALSE(mmio_stale_data_clear);
+
#include <asm/segment.h>
/**
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index f52a886d35cf..70533fdcbf02 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -69,6 +69,8 @@ void pcibios_scan_specific_bus(int busn);
/* pci-irq.c */
+struct pci_dev;
+
struct irq_info {
u8 bus, devfn; /* Bus, device and function */
struct {
@@ -246,3 +248,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val)
# define x86_default_pci_init_irq NULL
# define x86_default_pci_fixup_irqs NULL
#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_ACPI)
+extern bool pci_use_e820;
+#else
+#define pci_use_e820 false
+#endif
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 7590ac2570b9..f8b9ee97a891 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -108,19 +108,16 @@ extern unsigned long _brk_end;
void *extend_brk(size_t size, size_t align);
/*
- * Reserve space in the brk section. The name must be unique within the file,
- * and somewhat descriptive. The size is in bytes.
+ * Reserve space in the .brk section, which is a block of memory from which the
+ * caller is allowed to allocate very early (before even memblock is available)
+ * by calling extend_brk(). All allocated memory will be eventually converted
+ * to memblock. Any leftover unallocated memory will be freed.
*
- * The allocation is done using inline asm (rather than using a section
- * attribute on a normal variable) in order to allow the use of @nobits, so
- * that it doesn't take up any space in the vmlinux file.
+ * The size is in bytes.
*/
-#define RESERVE_BRK(name, size) \
- asm(".pushsection .brk_reservation,\"aw\",@nobits\n\t" \
- ".brk." #name ":\n\t" \
- ".skip " __stringify(size) "\n\t" \
- ".size .brk." #name ", " __stringify(size) "\n\t" \
- ".popsection\n\t")
+#define RESERVE_BRK(name, size) \
+ __section(".bss..brk") __aligned(1) __used \
+ static char __brk_##name[size]
extern void probe_roms(void);
#ifdef __i386__
@@ -133,12 +130,19 @@ asmlinkage void __init x86_64_start_reservations(char *real_mode_data);
#endif /* __i386__ */
#endif /* _SETUP */
-#else
-#define RESERVE_BRK(name,sz) \
- .pushsection .brk_reservation,"aw",@nobits; \
-.brk.name: \
-1: .skip sz; \
- .size .brk.name,.-1b; \
+
+#else /* __ASSEMBLY */
+
+.macro __RESERVE_BRK name, size
+ .pushsection .bss..brk, "aw"
+SYM_DATA_START(__brk_\name)
+ .skip \size
+SYM_DATA_END(__brk_\name)
.popsection
+.endm
+
+#define RESERVE_BRK(name, size) __RESERVE_BRK name, size
+
#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_X86_SETUP_H */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 35f222aa66bf..913e593a3b45 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -439,7 +439,7 @@ do { \
[ptr] "+m" (*_ptr), \
[old] "+a" (__old) \
: [new] ltype (__new) \
- : "memory", "cc"); \
+ : "memory"); \
if (unlikely(__err)) \
goto label; \
if (unlikely(!success)) \
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 03364dc40d8d..4c8b6ae802ac 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -36,10 +36,6 @@ KCSAN_SANITIZE := n
OBJECT_FILES_NON_STANDARD_test_nx.o := y
-ifdef CONFIG_FRAME_POINTER
-OBJECT_FILES_NON_STANDARD_ftrace_$(BITS).o := y
-endif
-
# If instrumentation of this dir is enabled, boot hangs during first second.
# Probably could be more selective here, but note that files related to irqs,
# boot, dumpstack/stacktrace, etc are either non-interesting or can lead to
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index d879a6c93609..74c62cc47a5f 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -41,8 +41,10 @@ static void __init spectre_v2_select_mitigation(void);
static void __init ssb_select_mitigation(void);
static void __init l1tf_select_mitigation(void);
static void __init mds_select_mitigation(void);
-static void __init mds_print_mitigation(void);
+static void __init md_clear_update_mitigation(void);
+static void __init md_clear_select_mitigation(void);
static void __init taa_select_mitigation(void);
+static void __init mmio_select_mitigation(void);
static void __init srbds_select_mitigation(void);
static void __init l1d_flush_select_mitigation(void);
@@ -85,6 +87,10 @@ EXPORT_SYMBOL_GPL(mds_idle_clear);
*/
DEFINE_STATIC_KEY_FALSE(switch_mm_cond_l1d_flush);
+/* Controls CPU Fill buffer clear before KVM guest MMIO accesses */
+DEFINE_STATIC_KEY_FALSE(mmio_stale_data_clear);
+EXPORT_SYMBOL_GPL(mmio_stale_data_clear);
+
void __init check_bugs(void)
{
identify_boot_cpu();
@@ -117,17 +123,10 @@ void __init check_bugs(void)
spectre_v2_select_mitigation();
ssb_select_mitigation();
l1tf_select_mitigation();
- mds_select_mitigation();
- taa_select_mitigation();
+ md_clear_select_mitigation();
srbds_select_mitigation();
l1d_flush_select_mitigation();
- /*
- * As MDS and TAA mitigations are inter-related, print MDS
- * mitigation until after TAA mitigation selection is done.
- */
- mds_print_mitigation();
-
arch_smt_update();
#ifdef CONFIG_X86_32
@@ -267,14 +266,6 @@ static void __init mds_select_mitigation(void)
}
}
-static void __init mds_print_mitigation(void)
-{
- if (!boot_cpu_has_bug(X86_BUG_MDS) || cpu_mitigations_off())
- return;
-
- pr_info("%s\n", mds_strings[mds_mitigation]);
-}
-
static int __init mds_cmdline(char *str)
{
if (!boot_cpu_has_bug(X86_BUG_MDS))
@@ -329,7 +320,7 @@ static void __init taa_select_mitigation(void)
/* TSX previously disabled by tsx=off */
if (!boot_cpu_has(X86_FEATURE_RTM)) {
taa_mitigation = TAA_MITIGATION_TSX_DISABLED;
- goto out;
+ return;
}
if (cpu_mitigations_off()) {
@@ -343,7 +334,7 @@ static void __init taa_select_mitigation(void)
*/
if (taa_mitigation == TAA_MITIGATION_OFF &&
mds_mitigation == MDS_MITIGATION_OFF)
- goto out;
+ return;
if (boot_cpu_has(X86_FEATURE_MD_CLEAR))
taa_mitigation = TAA_MITIGATION_VERW;
@@ -375,18 +366,6 @@ static void __init taa_select_mitigation(void)
if (taa_nosmt || cpu_mitigations_auto_nosmt())
cpu_smt_disable(false);
-
- /*
- * Update MDS mitigation, if necessary, as the mds_user_clear is
- * now enabled for TAA mitigation.
- */
- if (mds_mitigation == MDS_MITIGATION_OFF &&
- boot_cpu_has_bug(X86_BUG_MDS)) {
- mds_mitigation = MDS_MITIGATION_FULL;
- mds_select_mitigation();
- }
-out:
- pr_info("%s\n", taa_strings[taa_mitigation]);
}
static int __init tsx_async_abort_parse_cmdline(char *str)
@@ -411,6 +390,151 @@ static int __init tsx_async_abort_parse_cmdline(char *str)
early_param("tsx_async_abort", tsx_async_abort_parse_cmdline);
#undef pr_fmt
+#define pr_fmt(fmt) "MMIO Stale Data: " fmt
+
+enum mmio_mitigations {
+ MMIO_MITIGATION_OFF,
+ MMIO_MITIGATION_UCODE_NEEDED,
+ MMIO_MITIGATION_VERW,
+};
+
+/* Default mitigation for Processor MMIO Stale Data vulnerabilities */
+static enum mmio_mitigations mmio_mitigation __ro_after_init = MMIO_MITIGATION_VERW;
+static bool mmio_nosmt __ro_after_init = false;
+
+static const char * const mmio_strings[] = {
+ [MMIO_MITIGATION_OFF] = "Vulnerable",
+ [MMIO_MITIGATION_UCODE_NEEDED] = "Vulnerable: Clear CPU buffers attempted, no microcode",
+ [MMIO_MITIGATION_VERW] = "Mitigation: Clear CPU buffers",
+};
+
+static void __init mmio_select_mitigation(void)
+{
+ u64 ia32_cap;
+
+ if (!boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA) ||
+ cpu_mitigations_off()) {
+ mmio_mitigation = MMIO_MITIGATION_OFF;
+ return;
+ }
+
+ if (mmio_mitigation == MMIO_MITIGATION_OFF)
+ return;
+
+ ia32_cap = x86_read_arch_cap_msr();
+
+ /*
+ * Enable CPU buffer clear mitigation for host and VMM, if also affected
+ * by MDS or TAA. Otherwise, enable mitigation for VMM only.
+ */
+ if (boot_cpu_has_bug(X86_BUG_MDS) || (boot_cpu_has_bug(X86_BUG_TAA) &&
+ boot_cpu_has(X86_FEATURE_RTM)))
+ static_branch_enable(&mds_user_clear);
+ else
+ static_branch_enable(&mmio_stale_data_clear);
+
+ /*
+ * If Processor-MMIO-Stale-Data bug is present and Fill Buffer data can
+ * be propagated to uncore buffers, clearing the Fill buffers on idle
+ * is required irrespective of SMT state.
+ */
+ if (!(ia32_cap & ARCH_CAP_FBSDP_NO))
+ static_branch_enable(&mds_idle_clear);
+
+ /*
+ * Check if the system has the right microcode.
+ *
+ * CPU Fill buffer clear mitigation is enumerated by either an explicit
+ * FB_CLEAR or by the presence of both MD_CLEAR and L1D_FLUSH on MDS
+ * affected systems.
+ */
+ if ((ia32_cap & ARCH_CAP_FB_CLEAR) ||
+ (boot_cpu_has(X86_FEATURE_MD_CLEAR) &&
+ boot_cpu_has(X86_FEATURE_FLUSH_L1D) &&
+ !(ia32_cap & ARCH_CAP_MDS_NO)))
+ mmio_mitigation = MMIO_MITIGATION_VERW;
+ else
+ mmio_mitigation = MMIO_MITIGATION_UCODE_NEEDED;
+
+ if (mmio_nosmt || cpu_mitigations_auto_nosmt())
+ cpu_smt_disable(false);
+}
+
+static int __init mmio_stale_data_parse_cmdline(char *str)
+{
+ if (!boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA))
+ return 0;
+
+ if (!str)
+ return -EINVAL;
+
+ if (!strcmp(str, "off")) {
+ mmio_mitigation = MMIO_MITIGATION_OFF;
+ } else if (!strcmp(str, "full")) {
+ mmio_mitigation = MMIO_MITIGATION_VERW;
+ } else if (!strcmp(str, "full,nosmt")) {
+ mmio_mitigation = MMIO_MITIGATION_VERW;
+ mmio_nosmt = true;
+ }
+
+ return 0;
+}
+early_param("mmio_stale_data", mmio_stale_data_parse_cmdline);
+
+#undef pr_fmt
+#define pr_fmt(fmt) "" fmt
+
+static void __init md_clear_update_mitigation(void)
+{
+ if (cpu_mitigations_off())
+ return;
+
+ if (!static_key_enabled(&mds_user_clear))
+ goto out;
+
+ /*
+ * mds_user_clear is now enabled. Update MDS, TAA and MMIO Stale Data
+ * mitigation, if necessary.
+ */
+ if (mds_mitigation == MDS_MITIGATION_OFF &&
+ boot_cpu_has_bug(X86_BUG_MDS)) {
+ mds_mitigation = MDS_MITIGATION_FULL;
+ mds_select_mitigation();
+ }
+ if (taa_mitigation == TAA_MITIGATION_OFF &&
+ boot_cpu_has_bug(X86_BUG_TAA)) {
+ taa_mitigation = TAA_MITIGATION_VERW;
+ taa_select_mitigation();
+ }
+ if (mmio_mitigation == MMIO_MITIGATION_OFF &&
+ boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA)) {
+ mmio_mitigation = MMIO_MITIGATION_VERW;
+ mmio_select_mitigation();
+ }
+out:
+ if (boot_cpu_has_bug(X86_BUG_MDS))
+ pr_info("MDS: %s\n", mds_strings[mds_mitigation]);
+ if (boot_cpu_has_bug(X86_BUG_TAA))
+ pr_info("TAA: %s\n", taa_strings[taa_mitigation]);
+ if (boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA))
+ pr_info("MMIO Stale Data: %s\n", mmio_strings[mmio_mitigation]);
+}
+
+static void __init md_clear_select_mitigation(void)
+{
+ mds_select_mitigation();
+ taa_select_mitigation();
+ mmio_select_mitigation();
+
+ /*
+ * As MDS, TAA and MMIO Stale Data mitigations are inter-related, update
+ * and print their mitigation after MDS, TAA and MMIO Stale Data
+ * mitigation selection is done.
+ */
+ md_clear_update_mitigation();
+}
+
+#undef pr_fmt
#define pr_fmt(fmt) "SRBDS: " fmt
enum srbds_mitigations {
@@ -478,11 +602,13 @@ static void __init srbds_select_mitigation(void)
return;
/*
- * Check to see if this is one of the MDS_NO systems supporting
- * TSX that are only exposed to SRBDS when TSX is enabled.
+ * Check to see if this is one of the MDS_NO systems supporting TSX that
+ * are only exposed to SRBDS when TSX is enabled or when CPU is affected
+ * by Processor MMIO Stale Data vulnerability.
*/
ia32_cap = x86_read_arch_cap_msr();
- if ((ia32_cap & ARCH_CAP_MDS_NO) && !boot_cpu_has(X86_FEATURE_RTM))
+ if ((ia32_cap & ARCH_CAP_MDS_NO) && !boot_cpu_has(X86_FEATURE_RTM) &&
+ !boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA))
srbds_mitigation = SRBDS_MITIGATION_TSX_OFF;
else if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
srbds_mitigation = SRBDS_MITIGATION_HYPERVISOR;
@@ -1116,6 +1242,8 @@ static void update_indir_branch_cond(void)
/* Update the static key controlling the MDS CPU buffer clear in idle */
static void update_mds_branch_idle(void)
{
+ u64 ia32_cap = x86_read_arch_cap_msr();
+
/*
* Enable the idle clearing if SMT is active on CPUs which are
* affected only by MSBDS and not any other MDS variant.
@@ -1127,14 +1255,17 @@ static void update_mds_branch_idle(void)
if (!boot_cpu_has_bug(X86_BUG_MSBDS_ONLY))
return;
- if (sched_smt_active())
+ if (sched_smt_active()) {
static_branch_enable(&mds_idle_clear);
- else
+ } else if (mmio_mitigation == MMIO_MITIGATION_OFF ||
+ (ia32_cap & ARCH_CAP_FBSDP_NO)) {
static_branch_disable(&mds_idle_clear);
+ }
}
#define MDS_MSG_SMT "MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.\n"
#define TAA_MSG_SMT "TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.\n"
+#define MMIO_MSG_SMT "MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.\n"
void cpu_bugs_smt_update(void)
{
@@ -1179,6 +1310,16 @@ void cpu_bugs_smt_update(void)
break;
}
+ switch (mmio_mitigation) {
+ case MMIO_MITIGATION_VERW:
+ case MMIO_MITIGATION_UCODE_NEEDED:
+ if (sched_smt_active())
+ pr_warn_once(MMIO_MSG_SMT);
+ break;
+ case MMIO_MITIGATION_OFF:
+ break;
+ }
+
mutex_unlock(&spec_ctrl_mutex);
}
@@ -1781,6 +1922,20 @@ static ssize_t tsx_async_abort_show_state(char *buf)
sched_smt_active() ? "vulnerable" : "disabled");
}
+static ssize_t mmio_stale_data_show_state(char *buf)
+{
+ if (mmio_mitigation == MMIO_MITIGATION_OFF)
+ return sysfs_emit(buf, "%s\n", mmio_strings[mmio_mitigation]);
+
+ if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
+ return sysfs_emit(buf, "%s; SMT Host state unknown\n",
+ mmio_strings[mmio_mitigation]);
+ }
+
+ return sysfs_emit(buf, "%s; SMT %s\n", mmio_strings[mmio_mitigation],
+ sched_smt_active() ? "vulnerable" : "disabled");
+}
+
static char *stibp_state(void)
{
if (spectre_v2_in_eibrs_mode(spectre_v2_enabled))
@@ -1881,6 +2036,9 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr
case X86_BUG_SRBDS:
return srbds_show_state(buf);
+ case X86_BUG_MMIO_STALE_DATA:
+ return mmio_stale_data_show_state(buf);
+
default:
break;
}
@@ -1932,4 +2090,9 @@ ssize_t cpu_show_srbds(struct device *dev, struct device_attribute *attr, char *
{
return cpu_show_common(dev, attr, buf, X86_BUG_SRBDS);
}
+
+ssize_t cpu_show_mmio_stale_data(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return cpu_show_common(dev, attr, buf, X86_BUG_MMIO_STALE_DATA);
+}
#endif
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c296cb1c0113..4730b0a58f24 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1211,18 +1211,42 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = {
X86_FEATURE_ANY, issues)
#define SRBDS BIT(0)
+/* CPU is affected by X86_BUG_MMIO_STALE_DATA */
+#define MMIO BIT(1)
+/* CPU is affected by Shared Buffers Data Sampling (SBDS), a variant of X86_BUG_MMIO_STALE_DATA */
+#define MMIO_SBDS BIT(2)
static const struct x86_cpu_id cpu_vuln_blacklist[] __initconst = {
VULNBL_INTEL_STEPPINGS(IVYBRIDGE, X86_STEPPING_ANY, SRBDS),
VULNBL_INTEL_STEPPINGS(HASWELL, X86_STEPPING_ANY, SRBDS),
VULNBL_INTEL_STEPPINGS(HASWELL_L, X86_STEPPING_ANY, SRBDS),
VULNBL_INTEL_STEPPINGS(HASWELL_G, X86_STEPPING_ANY, SRBDS),
+ VULNBL_INTEL_STEPPINGS(HASWELL_X, BIT(2) | BIT(4), MMIO),
+ VULNBL_INTEL_STEPPINGS(BROADWELL_D, X86_STEPPINGS(0x3, 0x5), MMIO),
VULNBL_INTEL_STEPPINGS(BROADWELL_G, X86_STEPPING_ANY, SRBDS),
+ VULNBL_INTEL_STEPPINGS(BROADWELL_X, X86_STEPPING_ANY, MMIO),
VULNBL_INTEL_STEPPINGS(BROADWELL, X86_STEPPING_ANY, SRBDS),
+ VULNBL_INTEL_STEPPINGS(SKYLAKE_L, X86_STEPPINGS(0x3, 0x3), SRBDS | MMIO),
VULNBL_INTEL_STEPPINGS(SKYLAKE_L, X86_STEPPING_ANY, SRBDS),
+ VULNBL_INTEL_STEPPINGS(SKYLAKE_X, BIT(3) | BIT(4) | BIT(6) |
+ BIT(7) | BIT(0xB), MMIO),
+ VULNBL_INTEL_STEPPINGS(SKYLAKE, X86_STEPPINGS(0x3, 0x3), SRBDS | MMIO),
VULNBL_INTEL_STEPPINGS(SKYLAKE, X86_STEPPING_ANY, SRBDS),
- VULNBL_INTEL_STEPPINGS(KABYLAKE_L, X86_STEPPINGS(0x0, 0xC), SRBDS),
- VULNBL_INTEL_STEPPINGS(KABYLAKE, X86_STEPPINGS(0x0, 0xD), SRBDS),
+ VULNBL_INTEL_STEPPINGS(KABYLAKE_L, X86_STEPPINGS(0x9, 0xC), SRBDS | MMIO),
+ VULNBL_INTEL_STEPPINGS(KABYLAKE_L, X86_STEPPINGS(0x0, 0x8), SRBDS),
+ VULNBL_INTEL_STEPPINGS(KABYLAKE, X86_STEPPINGS(0x9, 0xD), SRBDS | MMIO),
+ VULNBL_INTEL_STEPPINGS(KABYLAKE, X86_STEPPINGS(0x0, 0x8), SRBDS),
+ VULNBL_INTEL_STEPPINGS(ICELAKE_L, X86_STEPPINGS(0x5, 0x5), MMIO | MMIO_SBDS),
+ VULNBL_INTEL_STEPPINGS(ICELAKE_D, X86_STEPPINGS(0x1, 0x1), MMIO),
+ VULNBL_INTEL_STEPPINGS(ICELAKE_X, X86_STEPPINGS(0x4, 0x6), MMIO),
+ VULNBL_INTEL_STEPPINGS(COMETLAKE, BIT(2) | BIT(3) | BIT(5), MMIO | MMIO_SBDS),
+ VULNBL_INTEL_STEPPINGS(COMETLAKE_L, X86_STEPPINGS(0x1, 0x1), MMIO | MMIO_SBDS),
+ VULNBL_INTEL_STEPPINGS(COMETLAKE_L, X86_STEPPINGS(0x0, 0x0), MMIO),
+ VULNBL_INTEL_STEPPINGS(LAKEFIELD, X86_STEPPINGS(0x1, 0x1), MMIO | MMIO_SBDS),
+ VULNBL_INTEL_STEPPINGS(ROCKETLAKE, X86_STEPPINGS(0x1, 0x1), MMIO),
+ VULNBL_INTEL_STEPPINGS(ATOM_TREMONT, X86_STEPPINGS(0x1, 0x1), MMIO | MMIO_SBDS),
+ VULNBL_INTEL_STEPPINGS(ATOM_TREMONT_D, X86_STEPPING_ANY, MMIO),
+ VULNBL_INTEL_STEPPINGS(ATOM_TREMONT_L, X86_STEPPINGS(0x0, 0x0), MMIO | MMIO_SBDS),
{}
};
@@ -1243,6 +1267,13 @@ u64 x86_read_arch_cap_msr(void)
return ia32_cap;
}
+static bool arch_cap_mmio_immune(u64 ia32_cap)
+{
+ return (ia32_cap & ARCH_CAP_FBSDP_NO &&
+ ia32_cap & ARCH_CAP_PSDP_NO &&
+ ia32_cap & ARCH_CAP_SBDR_SSDP_NO);
+}
+
static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c)
{
u64 ia32_cap = x86_read_arch_cap_msr();
@@ -1296,12 +1327,27 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c)
/*
* SRBDS affects CPUs which support RDRAND or RDSEED and are listed
* in the vulnerability blacklist.
+ *
+ * Some of the implications and mitigation of Shared Buffers Data
+ * Sampling (SBDS) are similar to SRBDS. Give SBDS same treatment as
+ * SRBDS.
*/
if ((cpu_has(c, X86_FEATURE_RDRAND) ||
cpu_has(c, X86_FEATURE_RDSEED)) &&
- cpu_matches(cpu_vuln_blacklist, SRBDS))
+ cpu_matches(cpu_vuln_blacklist, SRBDS | MMIO_SBDS))
setup_force_cpu_bug(X86_BUG_SRBDS);
+ /*
+ * Processor MMIO Stale Data bug enumeration
+ *
+ * Affected CPU list is generally enough to enumerate the vulnerability,
+ * but for virtualization case check for ARCH_CAP MSR bits also, VMM may
+ * not want the guest to enumerate the bug.
+ */
+ if (cpu_matches(cpu_vuln_blacklist, MMIO) &&
+ !arch_cap_mmio_immune(ia32_cap))
+ setup_force_cpu_bug(X86_BUG_MMIO_STALE_DATA);
+
if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
return;
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index 4ec13608d3c6..dfeb227de561 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -175,6 +175,7 @@ SYM_INNER_LABEL(ftrace_caller_end, SYM_L_GLOBAL)
jmp ftrace_epilogue
SYM_FUNC_END(ftrace_caller);
+STACK_FRAME_NON_STANDARD_FP(ftrace_caller)
SYM_FUNC_START(ftrace_epilogue)
/*
@@ -282,6 +283,7 @@ SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
jmp ftrace_epilogue
SYM_FUNC_END(ftrace_regs_caller)
+STACK_FRAME_NON_STANDARD_FP(ftrace_regs_caller)
#else /* ! CONFIG_DYNAMIC_FTRACE */
@@ -311,10 +313,14 @@ trace:
jmp ftrace_stub
SYM_FUNC_END(__fentry__)
EXPORT_SYMBOL(__fentry__)
+STACK_FRAME_NON_STANDARD_FP(__fentry__)
+
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-SYM_FUNC_START(return_to_handler)
+SYM_CODE_START(return_to_handler)
+ UNWIND_HINT_EMPTY
+ ANNOTATE_NOENDBR
subq $16, %rsp
/* Save the return values */
@@ -339,7 +345,6 @@ SYM_FUNC_START(return_to_handler)
int3
.Ldo_rop:
mov %rdi, (%rsp)
- UNWIND_HINT_FUNC
RET
-SYM_FUNC_END(return_to_handler)
+SYM_CODE_END(return_to_handler)
#endif
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
index db2b350a37b7..bba1abd05bfe 100644
--- a/arch/x86/kernel/resource.c
+++ b/arch/x86/kernel/resource.c
@@ -1,7 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/dev_printk.h>
#include <linux/ioport.h>
+#include <linux/printk.h>
#include <asm/e820/api.h>
+#include <asm/pci_x86.h>
static void resource_clip(struct resource *res, resource_size_t start,
resource_size_t end)
@@ -24,14 +25,14 @@ static void resource_clip(struct resource *res, resource_size_t start,
res->start = end + 1;
}
-void remove_e820_regions(struct device *dev, struct resource *avail)
+static void remove_e820_regions(struct resource *avail)
{
int i;
struct e820_entry *entry;
u64 e820_start, e820_end;
struct resource orig = *avail;
- if (!(avail->flags & IORESOURCE_MEM))
+ if (!pci_use_e820)
return;
for (i = 0; i < e820_table->nr_entries; i++) {
@@ -41,7 +42,7 @@ void remove_e820_regions(struct device *dev, struct resource *avail)
resource_clip(avail, e820_start, e820_end);
if (orig.start != avail->start || orig.end != avail->end) {
- dev_info(dev, "clipped %pR to %pR for e820 entry [mem %#010Lx-%#010Lx]\n",
+ pr_info("clipped %pR to %pR for e820 entry [mem %#010Lx-%#010Lx]\n",
&orig, avail, e820_start, e820_end);
orig = *avail;
}
@@ -55,6 +56,9 @@ void arch_remove_reservations(struct resource *avail)
* the low 1MB unconditionally, as this area is needed for some ISA
* cards requiring a memory range, e.g. the i82365 PCMCIA controller.
*/
- if (avail->flags & IORESOURCE_MEM)
+ if (avail->flags & IORESOURCE_MEM) {
resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+ remove_e820_regions(avail);
+ }
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 3ebb85327edb..bd6c6fd373ae 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -67,11 +67,6 @@ RESERVE_BRK(dmi_alloc, 65536);
#endif
-/*
- * Range of the BSS area. The size of the BSS area is determined
- * at link time, with RESERVE_BRK() facility reserving additional
- * chunks.
- */
unsigned long _brk_start = (unsigned long)__brk_base;
unsigned long _brk_end = (unsigned long)__brk_base;
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index f5f6dc2e8007..81aba718ecd5 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -385,10 +385,10 @@ SECTIONS
__end_of_kernel_reserve = .;
. = ALIGN(PAGE_SIZE);
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+ .brk (NOLOAD) : AT(ADDR(.brk) - LOAD_OFFSET) {
__brk_base = .;
. += 64 * 1024; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
+ *(.bss..brk) /* areas brk users have reserved */
__brk_limit = .;
}
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index f1bdac3f5aa8..0e68b4c937fc 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2039,6 +2039,19 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
}
}
+static void kvm_lapic_xapic_id_updated(struct kvm_lapic *apic)
+{
+ struct kvm *kvm = apic->vcpu->kvm;
+
+ if (KVM_BUG_ON(apic_x2apic_mode(apic), kvm))
+ return;
+
+ if (kvm_xapic_id(apic) == apic->vcpu->vcpu_id)
+ return;
+
+ kvm_set_apicv_inhibit(apic->vcpu->kvm, APICV_INHIBIT_REASON_APIC_ID_MODIFIED);
+}
+
static int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
{
int ret = 0;
@@ -2047,10 +2060,12 @@ static int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
switch (reg) {
case APIC_ID: /* Local APIC ID */
- if (!apic_x2apic_mode(apic))
+ if (!apic_x2apic_mode(apic)) {
kvm_apic_set_xapic_id(apic, val >> 24);
- else
+ kvm_lapic_xapic_id_updated(apic);
+ } else {
ret = 1;
+ }
break;
case APIC_TASKPRI:
@@ -2336,8 +2351,10 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
MSR_IA32_APICBASE_BASE;
if ((value & MSR_IA32_APICBASE_ENABLE) &&
- apic->base_address != APIC_DEFAULT_PHYS_BASE)
- pr_warn_once("APIC base relocation is unsupported by KVM");
+ apic->base_address != APIC_DEFAULT_PHYS_BASE) {
+ kvm_set_apicv_inhibit(apic->vcpu->kvm,
+ APICV_INHIBIT_REASON_APIC_BASE_MODIFIED);
+ }
}
void kvm_apic_update_apicv(struct kvm_vcpu *vcpu)
@@ -2648,6 +2665,8 @@ static int kvm_apic_state_fixup(struct kvm_vcpu *vcpu,
icr = __kvm_lapic_get_reg64(s->regs, APIC_ICR);
__kvm_lapic_set_reg(s->regs, APIC_ICR2, icr >> 32);
}
+ } else {
+ kvm_lapic_xapic_id_updated(vcpu->arch.apic);
}
return 0;
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index f4653688fa6d..17252f39bd7c 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3411,7 +3411,7 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
root = mmu_alloc_root(vcpu, i << (30 - PAGE_SHIFT),
i << 30, PT32_ROOT_LEVEL, true);
mmu->pae_root[i] = root | PT_PRESENT_MASK |
- shadow_me_mask;
+ shadow_me_value;
}
mmu->root.hpa = __pa(mmu->pae_root);
} else {
@@ -5179,7 +5179,7 @@ static void __kvm_mmu_free_obsolete_roots(struct kvm *kvm, struct kvm_mmu *mmu)
roots_to_free |= KVM_MMU_ROOT_CURRENT;
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
- if (is_obsolete_root(kvm, mmu->root.hpa))
+ if (is_obsolete_root(kvm, mmu->prev_roots[i].hpa))
roots_to_free |= KVM_MMU_ROOT_PREVIOUS(i);
}
diff --git a/arch/x86/kvm/mmu/tdp_iter.c b/arch/x86/kvm/mmu/tdp_iter.c
index 6d3b3e5a5533..ee4802d7b36c 100644
--- a/arch/x86/kvm/mmu/tdp_iter.c
+++ b/