{
int base;
- switch(a) {
+ switch (a) {
case '0'...'9':
base = '0';
break;
default:
base = 0;
}
- return (a - base);
+ return a - base;
}
static int bs_cmp(const void *p1, const void *p2)
return bsp1->perc < bsp2->perc;
}
-static int bssplit_ddir(struct thread_data *td, int ddir, char *str)
+static int bssplit_ddir(struct thread_options *o, int ddir, char *str)
{
struct bssplit *bssplit;
unsigned int i, perc, perc_missing;
long long val;
char *fname;
- td->o.bssplit_nr[ddir] = 4;
+ o->bssplit_nr[ddir] = 4;
bssplit = malloc(4 * sizeof(struct bssplit));
i = 0;
/*
* grow struct buffer, if needed
*/
- if (i == td->o.bssplit_nr[ddir]) {
- td->o.bssplit_nr[ddir] <<= 1;
- bssplit = realloc(bssplit, td->o.bssplit_nr[ddir]
+ if (i == o->bssplit_nr[ddir]) {
+ o->bssplit_nr[ddir] <<= 1;
+ bssplit = realloc(bssplit, o->bssplit_nr[ddir]
* sizeof(struct bssplit));
}
} else
perc = -1;
- if (str_to_decimal(fname, &val, 1, td)) {
+ if (str_to_decimal(fname, &val, 1, o)) {
log_err("fio: bssplit conversion failed\n");
- free(td->o.bssplit);
+ free(o->bssplit);
return 1;
}
i++;
}
- td->o.bssplit_nr[ddir] = i;
+ o->bssplit_nr[ddir] = i;
/*
* Now check if the percentages add up, and how much is missing
*/
perc = perc_missing = 0;
- for (i = 0; i < td->o.bssplit_nr[ddir]; i++) {
+ for (i = 0; i < o->bssplit_nr[ddir]; i++) {
struct bssplit *bsp = &bssplit[i];
if (bsp->perc == (unsigned char) -1)
* them.
*/
if (perc_missing) {
- for (i = 0; i < td->o.bssplit_nr[ddir]; i++) {
+ for (i = 0; i < o->bssplit_nr[ddir]; i++) {
struct bssplit *bsp = &bssplit[i];
if (bsp->perc == (unsigned char) -1)
}
}
- td->o.min_bs[ddir] = min_bs;
- td->o.max_bs[ddir] = max_bs;
+ o->min_bs[ddir] = min_bs;
+ o->max_bs[ddir] = max_bs;
/*
* now sort based on percentages, for ease of lookup
*/
- qsort(bssplit, td->o.bssplit_nr[ddir], sizeof(struct bssplit), bs_cmp);
- td->o.bssplit[ddir] = bssplit;
+ qsort(bssplit, o->bssplit_nr[ddir], sizeof(struct bssplit), bs_cmp);
+ o->bssplit[ddir] = bssplit;
return 0;
-
}
static int str_bssplit_cb(void *data, const char *input)
if (odir) {
ddir = strchr(odir + 1, ',');
if (ddir) {
- ret = bssplit_ddir(td, DDIR_TRIM, ddir + 1);
+ ret = bssplit_ddir(&td->o, DDIR_TRIM, ddir + 1);
if (!ret)
*ddir = '\0';
} else {
char *op;
op = strdup(odir + 1);
- ret = bssplit_ddir(td, DDIR_TRIM, op);
+ ret = bssplit_ddir(&td->o, DDIR_TRIM, op);
free(op);
}
- if (!ret)
- ret = bssplit_ddir(td, DDIR_WRITE, odir + 1);
+ if (!ret)
+ ret = bssplit_ddir(&td->o, DDIR_WRITE, odir + 1);
if (!ret) {
*odir = '\0';
- ret = bssplit_ddir(td, DDIR_READ, str);
+ ret = bssplit_ddir(&td->o, DDIR_READ, str);
}
} else {
char *op;
op = strdup(str);
- ret = bssplit_ddir(td, DDIR_WRITE, op);
+ ret = bssplit_ddir(&td->o, DDIR_WRITE, op);
free(op);
if (!ret) {
op = strdup(str);
- ret = bssplit_ddir(td, DDIR_TRIM, op);
+ ret = bssplit_ddir(&td->o, DDIR_TRIM, op);
free(op);
}
- ret = bssplit_ddir(td, DDIR_READ, str);
+ ret = bssplit_ddir(&td->o, DDIR_READ, str);
}
free(p);
static int str2error(char *str)
{
- const char * err[] = {"EPERM", "ENOENT", "ESRCH", "EINTR", "EIO",
+ const char *err[] = { "EPERM", "ENOENT", "ESRCH", "EINTR", "EIO",
"ENXIO", "E2BIG", "ENOEXEC", "EBADF",
"ECHILD", "EAGAIN", "ENOMEM", "EACCES",
"EFAULT", "ENOTBLK", "EBUSY", "EEXIST",
"EXDEV", "ENODEV", "ENOTDIR", "EISDIR",
"EINVAL", "ENFILE", "EMFILE", "ENOTTY",
"ETXTBSY","EFBIG", "ENOSPC", "ESPIPE",
- "EROFS","EMLINK", "EPIPE", "EDOM", "ERANGE"};
+ "EROFS","EMLINK", "EPIPE", "EDOM", "ERANGE" };
int i = 0, num = sizeof(err) / sizeof(void *);
- while( i < num) {
+ while (i < num) {
if (!strcmp(err[i], str))
return i + 1;
i++;
static int str_rw_cb(void *data, const char *str)
{
struct thread_data *td = data;
+ struct thread_options *o = &td->o;
char *nr = get_opt_postfix(str);
- td->o.ddir_seq_nr = 1;
- td->o.ddir_seq_add = 0;
+ o->ddir_seq_nr = 1;
+ o->ddir_seq_add = 0;
if (!nr)
return 0;
if (td_random(td))
- td->o.ddir_seq_nr = atoi(nr);
+ o->ddir_seq_nr = atoi(nr);
else {
long long val;
- if (str_to_decimal(nr, &val, 1, td)) {
+ if (str_to_decimal(nr, &val, 1, o)) {
log_err("fio: rw postfix parsing failed\n");
free(nr);
return 1;
}
- td->o.ddir_seq_add = val;
+ o->ddir_seq_add = val;
}
free(nr);
struct thread_data *td = data;
if (td->o.mem_type == MEM_MMAPHUGE || td->o.mem_type == MEM_MMAP)
- td->mmapfile = get_opt_postfix(mem);
-
- return 0;
-}
-
-static int str_verify_cb(void *data, const char *mem)
-{
- struct thread_data *td = data;
-
- if (td->o.verify == VERIFY_CRC32C_INTEL ||
- td->o.verify == VERIFY_CRC32C) {
- crc32c_intel_probe();
- }
+ td->o.mmapfile = get_opt_postfix(mem);
return 0;
}
return 0;
}
-static int str_lockmem_cb(void fio_unused *data, unsigned long long *val)
-{
- mlock_size = *val;
- return 0;
-}
-
static int str_rwmix_read_cb(void *data, unsigned long long *val)
{
struct thread_data *td = data;
return 0;
}
-#ifdef FIO_HAVE_IOPRIO
-static int str_prioclass_cb(void *data, unsigned long long *val)
-{
- struct thread_data *td = data;
- unsigned short mask;
-
- /*
- * mask off old class bits, str_prio_cb() may have set a default class
- */
- mask = (1 << IOPRIO_CLASS_SHIFT) - 1;
- td->ioprio &= mask;
-
- td->ioprio |= *val << IOPRIO_CLASS_SHIFT;
- td->ioprio_set = 1;
- return 0;
-}
-
-static int str_prio_cb(void *data, unsigned long long *val)
-{
- struct thread_data *td = data;
-
- td->ioprio |= *val;
-
- /*
- * If no class is set, assume BE
- */
- if ((td->ioprio >> IOPRIO_CLASS_SHIFT) == 0)
- td->ioprio |= IOPRIO_CLASS_BE << IOPRIO_CLASS_SHIFT;
-
- td->ioprio_set = 1;
- return 0;
-}
-#endif
-
static int str_exitall_cb(void)
{
exitall_on_terminate = 1;
}
#endif
-#ifdef FIO_HAVE_TRIM
-static int str_verify_trim_cb(void *data, unsigned long long *val)
-{
- struct thread_data *td = data;
-
- td->o.trim_percentage = *val;
- return 0;
-}
-#endif
-
static int str_fst_cb(void *data, const char *str)
{
struct thread_data *td = data;
log_err("fio: zipf theta must different than 1.0\n");
return 1;
}
- td->o.zipf_theta = val;
+ td->o.zipf_theta.u.f = val;
} else {
if (val <= 0.00 || val >= 1.00) {
log_err("fio: pareto input out of range (0 < input < 1.0)\n");
return 1;
}
- td->o.pareto_h = val;
- }
-
- return 0;
-}
-
-static int check_dir(struct thread_data *td, char *fname)
-{
-#if 0
- char file[PATH_MAX], *dir;
- int elen = 0;
-
- if (td->o.directory) {
- strcpy(file, td->o.directory);
- strcat(file, "/");
- elen = strlen(file);
- }
-
- sprintf(file + elen, "%s", fname);
- dir = dirname(file);
-
- {
- struct stat sb;
- /*
- * We can't do this on FIO_DISKLESSIO engines. The engine isn't loaded
- * yet, so we can't do this check right here...
- */
- if (lstat(dir, &sb) < 0) {
- int ret = errno;
-
- log_err("fio: %s is not a directory\n", dir);
- td_verror(td, ret, "lstat");
- return 1;
- }
-
- if (!S_ISDIR(sb.st_mode)) {
- log_err("fio: %s is not a directory\n", dir);
- return 1;
- }
+ td->o.pareto_h.u.f = val;
}
-#endif
return 0;
}
while ((fname = get_next_file_name(&str)) != NULL) {
if (!strlen(fname))
break;
- if (check_dir(td, fname)) {
- free(p);
- return 1;
- }
add_file(td, fname);
td->o.nr_files++;
}
return add_dir_files(td, td->o.opendir);
}
-static int str_verify_offset_cb(void *data, unsigned long long *off)
-{
- struct thread_data *td = data;
-
- if (*off && *off < sizeof(struct verify_header)) {
- log_err("fio: verify_offset too small\n");
- return 1;
- }
-
- td->o.verify_offset = *off;
- return 0;
-}
-
static int str_verify_pattern_cb(void *data, const char *input)
{
struct thread_data *td = data;
long off;
int i = 0, j = 0, len, k, base = 10;
- char* loc1, * loc2;
+ char *loc1, *loc2;
loc1 = strstr(input, "0x");
loc2 = strstr(input, "0X");
return 0;
}
-static int str_write_bw_log_cb(void *data, const char *str)
-{
- struct thread_data *td = data;
-
- if (str)
- td->o.bw_log_file = strdup(str);
-
- td->o.write_bw_log = 1;
- return 0;
-}
-
-static int str_write_lat_log_cb(void *data, const char *str)
-{
- struct thread_data *td = data;
-
- if (str)
- td->o.lat_log_file = strdup(str);
-
- td->o.write_lat_log = 1;
- return 0;
-}
-
-static int str_write_iops_log_cb(void *data, const char *str)
-{
- struct thread_data *td = data;
-
- if (str)
- td->o.iops_log_file = strdup(str);
-
- td->o.write_iops_log = 1;
- return 0;
-}
-
static int str_gtod_reduce_cb(void *data, int *il)
{
struct thread_data *td = data;
return 0;
}
+/*
+ * Option grouping
+ */
+static struct opt_group fio_opt_groups[] = {
+ {
+ .name = "General",
+ .mask = FIO_OPT_C_GENERAL,
+ },
+ {
+ .name = "I/O",
+ .mask = FIO_OPT_C_IO,
+ },
+ {
+ .name = "File",
+ .mask = FIO_OPT_C_FILE,
+ },
+ {
+ .name = "Statistics",
+ .mask = FIO_OPT_C_STAT,
+ },
+ {
+ .name = "Logging",
+ .mask = FIO_OPT_C_LOG,
+ },
+ {
+ .name = "Profiles",
+ .mask = FIO_OPT_C_PROFILE,
+ },
+ {
+ .name = NULL,
+ },
+};
+
+static struct opt_group *__opt_group_from_mask(struct opt_group *ogs, unsigned int *mask,
+ unsigned int inv_mask)
+{
+ struct opt_group *og;
+ int i;
+
+ if (*mask == inv_mask || !*mask)
+ return NULL;
+
+ for (i = 0; ogs[i].name; i++) {
+ og = &ogs[i];
+
+ if (*mask & og->mask) {
+ *mask &= ~(og->mask);
+ return og;
+ }
+ }
+
+ return NULL;
+}
+
+struct opt_group *opt_group_from_mask(unsigned int *mask)
+{
+ return __opt_group_from_mask(fio_opt_groups, mask, FIO_OPT_C_INVALID);
+}
+
+static struct opt_group fio_opt_cat_groups[] = {
+ {
+ .name = "Rate",
+ .mask = FIO_OPT_G_RATE,
+ },
+ {
+ .name = "Zone",
+ .mask = FIO_OPT_G_ZONE,
+ },
+ {
+ .name = "Read/write mix",
+ .mask = FIO_OPT_G_RWMIX,
+ },
+ {
+ .name = "Verify",
+ .mask = FIO_OPT_G_VERIFY,
+ },
+ {
+ .name = "Trim",
+ .mask = FIO_OPT_G_TRIM,
+ },
+ {
+ .name = "I/O Logging",
+ .mask = FIO_OPT_G_IOLOG,
+ },
+ {
+ .name = "I/O Depth",
+ .mask = FIO_OPT_G_IO_DEPTH,
+ },
+ {
+ .name = "I/O Flow",
+ .mask = FIO_OPT_G_IO_FLOW,
+ },
+ {
+ .name = "Description",
+ .mask = FIO_OPT_G_DESC,
+ },
+ {
+ .name = "Filename",
+ .mask = FIO_OPT_G_FILENAME,
+ },
+ {
+ .name = "General I/O",
+ .mask = FIO_OPT_G_IO_BASIC,
+ },
+ {
+ .name = "Cgroups",
+ .mask = FIO_OPT_G_CGROUP,
+ },
+ {
+ .name = "Runtime",
+ .mask = FIO_OPT_G_RUNTIME,
+ },
+ {
+ .name = "Process",
+ .mask = FIO_OPT_G_PROCESS,
+ },
+ {
+ .name = "Job credentials / priority",
+ .mask = FIO_OPT_G_CRED,
+ },
+ {
+ .name = "Clock settings",
+ .mask = FIO_OPT_G_CLOCK,
+ },
+ {
+ .name = "I/O Type",
+ .mask = FIO_OPT_G_IO_TYPE,
+ },
+ {
+ .name = "I/O Thinktime",
+ .mask = FIO_OPT_G_THINKTIME,
+ },
+ {
+ .name = "Randomizations",
+ .mask = FIO_OPT_G_RANDOM,
+ },
+ {
+ .name = "I/O buffers",
+ .mask = FIO_OPT_G_IO_BUF,
+ },
+ {
+ .name = "Tiobench profile",
+ .mask = FIO_OPT_G_TIOBENCH,
+ },
+
+ {
+ .name = NULL,
+ }
+};
+
+struct opt_group *opt_group_cat_from_mask(unsigned int *mask)
+{
+ return __opt_group_from_mask(fio_opt_cat_groups, mask, FIO_OPT_G_INVALID);
+}
+
/*
* Map of job/command line options
*/
-static struct fio_option options[FIO_MAX_OPTS] = {
+struct fio_option fio_options[FIO_MAX_OPTS] = {
{
.name = "description",
+ .lname = "Description of job",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(description),
.help = "Text job description",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_DESC,
},
{
.name = "name",
+ .lname = "Job name",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(name),
.help = "Name of this job",
- },
- {
- .name = "directory",
- .type = FIO_OPT_STR_STORE,
- .off1 = td_var_offset(directory),
- .cb = str_directory_cb,
- .help = "Directory to store files in",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_DESC,
},
{
.name = "filename",
+ .lname = "Filename(s)",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(filename),
.cb = str_filename_cb,
.prio = -1, /* must come after "directory" */
.help = "File(s) to use for the workload",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_FILENAME,
},
{
- .name = "kb_base",
- .type = FIO_OPT_INT,
- .off1 = td_var_offset(kb_base),
- .verify = kb_base_verify,
- .prio = 1,
- .def = "1024",
- .help = "How many bytes per KB for reporting (1000 or 1024)",
+ .name = "directory",
+ .lname = "Directory",
+ .type = FIO_OPT_STR_STORE,
+ .off1 = td_var_offset(directory),
+ .cb = str_directory_cb,
+ .help = "Directory to store files in",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_FILENAME,
},
{
.name = "lockfile",
+ .lname = "Lockfile",
.type = FIO_OPT_STR,
.cb = str_lockfile_cb,
.off1 = td_var_offset(file_lock_mode),
.help = "Lock file when doing IO to it",
.parent = "filename",
+ .hide = 0,
.def = "none",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_FILENAME,
.posval = {
{ .ival = "none",
.oval = FILE_LOCK_NONE,
},
{
.name = "opendir",
+ .lname = "Open directory",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(opendir),
.cb = str_opendir_cb,
.help = "Recursively add files from this directory and down",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_FILENAME,
},
{
.name = "rw",
+ .lname = "Read/write",
.alias = "readwrite",
.type = FIO_OPT_STR,
.cb = str_rw_cb,
.help = "IO direction",
.def = "read",
.verify = rw_verify,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
.posval = {
{ .ival = "read",
.oval = TD_DDIR_READ,
},
{
.name = "rw_sequencer",
+ .lname = "RW Sequencer",
.type = FIO_OPT_STR,
.off1 = td_var_offset(rw_seq),
.help = "IO offset generator modifier",
.def = "sequential",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
.posval = {
{ .ival = "sequential",
.oval = RW_SEQ_SEQ,
{
.name = "ioengine",
+ .lname = "IO Engine",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(ioengine),
.help = "IO engine to use",
.def = FIO_PREFERRED_ENGINE,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
.posval = {
{ .ival = "sync",
.help = "Use read/write",
.help = "POSIX asynchronous IO",
},
#endif
- #ifdef FIO_HAVE_SOLARISAIO
+ #ifdef CONFIG_SOLARISAIO
{ .ival = "solarisaio",
.help = "Solaris native asynchronous IO",
},
#endif
- #ifdef FIO_HAVE_WINDOWSAIO
+ #ifdef CONFIG_WINDOWSAIO
{ .ival = "windowsaio",
.help = "Windows native asynchronous IO"
},
.help = "Fusion-io atomic write engine",
},
#endif
- #ifdef FIO_HAVE_E4_ENG
+ #ifdef CONFIG_LINUX_EXT4_MOVE_EXTENT
{ .ival = "e4defrag",
.help = "ext4 defrag engine",
},
#endif
- #ifdef FIO_HAVE_FALLOC_ENG
+ #ifdef CONFIG_LINUX_FALLOCATE
{ .ival = "falloc",
.help = "fallocate() file based engine",
},
},
{
.name = "iodepth",
+ .lname = "IO Depth",
.type = FIO_OPT_INT,
.off1 = td_var_offset(iodepth),
.help = "Number of IO buffers to keep in flight",
.minval = 1,
+ .interval = 1,
.def = "1",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
},
{
.name = "iodepth_batch",
+ .lname = "IO Depth batch",
.alias = "iodepth_batch_submit",
.type = FIO_OPT_INT,
.off1 = td_var_offset(iodepth_batch),
.help = "Number of IO buffers to submit in one go",
.parent = "iodepth",
+ .hide = 1,
.minval = 1,
+ .interval = 1,
.def = "1",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
},
{
.name = "iodepth_batch_complete",
+ .lname = "IO Depth batch complete",
.type = FIO_OPT_INT,
.off1 = td_var_offset(iodepth_batch_complete),
.help = "Number of IO buffers to retrieve in one go",
.parent = "iodepth",
+ .hide = 1,
.minval = 0,
+ .interval = 1,
.def = "1",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
},
{
.name = "iodepth_low",
+ .lname = "IO Depth batch low",
.type = FIO_OPT_INT,
.off1 = td_var_offset(iodepth_low),
.help = "Low water mark for queuing depth",
.parent = "iodepth",
+ .hide = 1,
+ .interval = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BASIC,
},
{
.name = "size",
+ .lname = "Size",
.type = FIO_OPT_STR_VAL,
.cb = str_size_cb,
.help = "Total size of device or files",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "fill_device",
+ .lname = "Fill device",
.alias = "fill_fs",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(fill_device),
.help = "Write until an ENOSPC error occurs",
.def = "0",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "filesize",
+ .lname = "File size",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(file_size_low),
.off2 = td_var_offset(file_size_high),
.minval = 1,
.help = "Size of individual files",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "offset",
+ .lname = "IO offset",
.alias = "fileoffset",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(start_offset),
.help = "Start IO from this offset",
.def = "0",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "offset_increment",
+ .lname = "IO offset increment",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(offset_increment),
.help = "What is the increment from one offset to the next",
.parent = "offset",
+ .hide = 1,
.def = "0",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "bs",
+ .lname = "Block size",
.alias = "blocksize",
.type = FIO_OPT_INT,
.off1 = td_var_offset(bs[DDIR_READ]),
.help = "Block size unit",
.def = "4k",
.parent = "rw",
+ .hide = 1,
+ .interval = 512,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "ba",
+ .lname = "Block size align",
.alias = "blockalign",
.type = FIO_OPT_INT,
.off1 = td_var_offset(ba[DDIR_READ]),
.minval = 1,
.help = "IO block offset alignment",
.parent = "rw",
+ .hide = 1,
+ .interval = 512,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "bsrange",
+ .lname = "Block size range",
.alias = "blocksize_range",
.type = FIO_OPT_RANGE,
.off1 = td_var_offset(min_bs[DDIR_READ]),
.minval = 1,
.help = "Set block size range (in more detail than bs)",
.parent = "rw",
+ .hide = 1,
+ .interval = 4096,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "bssplit",
+ .lname = "Block size split",
.type = FIO_OPT_STR,
.cb = str_bssplit_cb,
.help = "Set a specific mix of block sizes",
.parent = "rw",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "bs_unaligned",
+ .lname = "Block size unaligned",
.alias = "blocksize_unaligned",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(bs_unaligned),
.help = "Don't sector align IO buffer sizes",
.parent = "rw",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "randrepeat",
+ .lname = "Random repeatable",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(rand_repeatable),
.help = "Use repeatable random IO pattern",
.def = "1",
.parent = "rw",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RANDOM,
},
{
.name = "use_os_rand",
+ .lname = "Use OS random",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(use_os_rand),
.help = "Set to use OS random generator",
.def = "0",
.parent = "rw",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RANDOM,
},
{
.name = "norandommap",
+ .lname = "No randommap",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(norandommap),
.help = "Accept potential duplicate random blocks",
.parent = "rw",
+ .hide = 1,
+ .hide_on_set = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RANDOM,
},
{
.name = "softrandommap",
+ .lname = "Soft randommap",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(softrandommap),
.help = "Set norandommap if randommap allocation fails",
.parent = "norandommap",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RANDOM,
},
{
.name = "random_generator",
.help = "Variable length LFSR",
},
},
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RANDOM,
},
{
.name = "random_distribution",
.help = "Pareto distribution",
},
},
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RANDOM,
},
{
.name = "nrfiles",
+ .lname = "Number of files",
.alias = "nr_files",
.type = FIO_OPT_INT,
.off1 = td_var_offset(nr_files),
.help = "Split job workload between this number of files",
.def = "1",
+ .interval = 1,
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "openfiles",
+ .lname = "Number of open files",
.type = FIO_OPT_INT,
.off1 = td_var_offset(open_files),
.help = "Number of files to keep open at the same time",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "file_service_type",
+ .lname = "File service type",
.type = FIO_OPT_STR,
.cb = str_fst_cb,
.off1 = td_var_offset(file_service_type),
.help = "How to select which file to service next",
.def = "roundrobin",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
.posval = {
{ .ival = "random",
.oval = FIO_FSERVICE_RANDOM,
},
},
.parent = "nrfiles",
+ .hide = 1,
},
- #ifdef FIO_HAVE_FALLOCATE
+ #ifdef CONFIG_POSIX_FALLOCATE
{
.name = "fallocate",
+ .lname = "Fallocate",
.type = FIO_OPT_STR,
.off1 = td_var_offset(fallocate_mode),
.help = "Whether pre-allocation is performed when laying out files",
.def = "posix",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
.posval = {
{ .ival = "none",
.oval = FIO_FALLOCATE_NONE,
.oval = FIO_FALLOCATE_POSIX,
.help = "Use posix_fallocate()",
},
- #ifdef FIO_HAVE_LINUX_FALLOCATE
+ #ifdef CONFIG_LINUX_FALLOCATE
{ .ival = "keep",
.oval = FIO_FALLOCATE_KEEP_SIZE,
.help = "Use fallocate(..., FALLOC_FL_KEEP_SIZE, ...)",
},
},
},
- #endif /* FIO_HAVE_FALLOCATE */
+ #endif /* CONFIG_POSIX_FALLOCATE */
{
.name = "fadvise_hint",
+ .lname = "Fadvise hint",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(fadvise_hint),
.help = "Use fadvise() to advise the kernel on IO pattern",
.def = "1",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "fsync",
+ .lname = "Fsync",
.type = FIO_OPT_INT,
.off1 = td_var_offset(fsync_blocks),
.help = "Issue fsync for writes every given number of blocks",
.def = "0",
+ .interval = 1,
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "fdatasync",
+ .lname = "Fdatasync",
.type = FIO_OPT_INT,
.off1 = td_var_offset(fdatasync_blocks),
.help = "Issue fdatasync for writes every given number of blocks",
.def = "0",
+ .interval = 1,
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "write_barrier",
+ .lname = "Write barrier",
.type = FIO_OPT_INT,
.off1 = td_var_offset(barrier_blocks),
.help = "Make every Nth write a barrier write",
.def = "0",
+ .interval = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
#ifdef CONFIG_SYNC_FILE_RANGE
{
.name = "sync_file_range",
+ .lname = "Sync file range",
.posval = {
{ .ival = "wait_before",
.oval = SYNC_FILE_RANGE_WAIT_BEFORE,
.cb = str_sfr_cb,
.off1 = td_var_offset(sync_file_range),
.help = "Use sync_file_range()",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
#endif
{
.name = "direct",
+ .lname = "Direct I/O",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(odirect),
.help = "Use O_DIRECT IO (negates buffered)",
.def = "0",
+ .inverse = "buffered",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_TYPE,
},
{
.name = "buffered",
+ .lname = "Buffered I/O",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(odirect),
.neg = 1,
.help = "Use buffered IO (negates direct)",
.def = "1",
+ .inverse = "direct",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_TYPE,
},
{
.name = "overwrite",
+ .lname = "Overwrite",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(overwrite),
.help = "When writing, set whether to overwrite current data",
.def = "0",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "loops",
+ .lname = "Loops",
.type = FIO_OPT_INT,
.off1 = td_var_offset(loops),
.help = "Number of times to run the job",
.def = "1",
+ .interval = 1,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_RUNTIME,
},
{
.name = "numjobs",
+ .lname = "Number of jobs",
.type = FIO_OPT_INT,
.off1 = td_var_offset(numjobs),
.help = "Duplicate this job this many times",
.def = "1",
+ .interval = 1,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_RUNTIME,
},
{
.name = "startdelay",
+ .lname = "Start delay",
.type = FIO_OPT_STR_VAL_TIME,
.off1 = td_var_offset(start_delay),
.help = "Only start job when this period has passed",
.def = "0",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_RUNTIME,
},
{
.name = "runtime",
+ .lname = "Runtime",
.alias = "timeout",
.type = FIO_OPT_STR_VAL_TIME,
.off1 = td_var_offset(timeout),
.help = "Stop workload when this amount of time has passed",
.def = "0",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_RUNTIME,
},
{
.name = "time_based",
+ .lname = "Time based",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(time_based),
.help = "Keep running until runtime/timeout is met",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_RUNTIME,
},
{
.name = "ramp_time",
+ .lname = "Ramp time",
.type = FIO_OPT_STR_VAL_TIME,
.off1 = td_var_offset(ramp_time),
.help = "Ramp up time before measuring performance",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_RUNTIME,
},
{
.name = "clocksource",
+ .lname = "Clock source",
.type = FIO_OPT_STR,
.cb = fio_clock_source_cb,
.off1 = td_var_offset(clocksource),
.help = "What type of timing source to use",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CLOCK,
.posval = {
#ifdef CONFIG_GETTIMEOFDAY
{ .ival = "gettimeofday",
{
.name = "mem",
.alias = "iomem",
+ .lname = "I/O Memory",
.type = FIO_OPT_STR,
.cb = str_mem_cb,
.off1 = td_var_offset(mem_type),
.help = "Backing type for IO buffers",
.def = "malloc",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
.posval = {
{ .ival = "malloc",
.oval = MEM_MALLOC,
{
.name = "iomem_align",
.alias = "mem_align",
+ .lname = "I/O memory alignment",
.type = FIO_OPT_INT,
.off1 = td_var_offset(mem_align),
.minval = 0,
.help = "IO memory buffer offset alignment",
.def = "0",
.parent = "iomem",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "verify",
+ .lname = "Verify",
.type = FIO_OPT_STR,
.off1 = td_var_offset(verify),
.help = "Verify data written",
- .cb = str_verify_cb,
.def = "0",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
.posval = {
{ .ival = "0",
.oval = VERIFY_NONE,
},
{
.name = "do_verify",
+ .lname = "Perform verify step",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(do_verify),
.help = "Run verification stage after write",
.def = "1",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verifysort",
+ .lname = "Verify sort",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(verifysort),
.help = "Sort written verify blocks for read back",
.def = "1",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verifysort_nr",
.maxval = 131072,
.def = "1024",
.parent = "verify",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_interval",
+ .lname = "Verify interval",
.type = FIO_OPT_INT,
.off1 = td_var_offset(verify_interval),
.minval = 2 * sizeof(struct verify_header),
.help = "Store verify buffer header every N bytes",
.parent = "verify",
+ .hide = 1,
+ .interval = 2 * sizeof(struct verify_header),
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_offset",
+ .lname = "Verify offset",
.type = FIO_OPT_INT,
.help = "Offset verify header location by N bytes",
- .def = "0",
- .cb = str_verify_offset_cb,
+ .off1 = td_var_offset(verify_offset),
+ .minval = sizeof(struct verify_header),
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_pattern",
+ .lname = "Verify pattern",
.type = FIO_OPT_STR,
.cb = str_verify_pattern_cb,
.help = "Fill pattern for IO buffers",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_fatal",
+ .lname = "Verify fatal",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(verify_fatal),
.def = "0",
.help = "Exit on a single verify failure, don't continue",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_dump",
+ .lname = "Verify dump",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(verify_dump),
.def = "0",
.help = "Dump contents of good and bad blocks on failure",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_async",
+ .lname = "Verify asynchronously",
.type = FIO_OPT_INT,
.off1 = td_var_offset(verify_async),
.def = "0",
.help = "Number of async verifier threads to use",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_backlog",
+ .lname = "Verify backlog",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(verify_backlog),
.help = "Verify after this number of blocks are written",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
{
.name = "verify_backlog_batch",
+ .lname = "Verify backlog batch",
.type = FIO_OPT_INT,
.off1 = td_var_offset(verify_batch),
.help = "Verify this number of IO blocks",
.parent = "verify",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
#ifdef FIO_HAVE_CPU_AFFINITY
{
.name = "verify_async_cpus",
+ .lname = "Async verify CPUs",
.type = FIO_OPT_STR,
.cb = str_verify_cpus_allowed_cb,
.help = "Set CPUs allowed for async verify threads",
.parent = "verify_async",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
#endif
{
.name = "experimental_verify",
.off1 = td_var_offset(experimental_verify),
.type = FIO_OPT_BOOL,
+ .help = "Enable experimental verification",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_VERIFY,
},
#ifdef FIO_HAVE_TRIM
{
.name = "trim_percentage",
+ .lname = "Trim percentage",
.type = FIO_OPT_INT,
- .cb = str_verify_trim_cb,
+ .off1 = td_var_offset(trim_percentage),
+ .minval = 0,
.maxval = 100,
.help = "Number of verify blocks to discard/trim",
.parent = "verify",
.def = "0",
+ .interval = 1,
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_TRIM,
},
{
.name = "trim_verify_zero",
- .type = FIO_OPT_INT,
+ .lname = "Verify trim zero",
+ .type = FIO_OPT_BOOL,
.help = "Verify that trim/discarded blocks are returned as zeroes",
.off1 = td_var_offset(trim_zero),
.parent = "trim_percentage",
+ .hide = 1,
.def = "1",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_TRIM,
},
{
.name = "trim_backlog",
+ .lname = "Trim backlog",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(trim_backlog),
.help = "Trim after this number of blocks are written",
.parent = "trim_percentage",
+ .hide = 1,
+ .interval = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_TRIM,
},
{
.name = "trim_backlog_batch",
+ .lname = "Trim backlog batch",
.type = FIO_OPT_INT,
.off1 = td_var_offset(trim_batch),
.help = "Trim this number of IO blocks",
.parent = "trim_percentage",
+ .hide = 1,
+ .interval = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_TRIM,
},
#endif
{
.name = "write_iolog",
+ .lname = "Write I/O log",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(write_iolog_file),
.help = "Store IO pattern to file",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IOLOG,
},
{
.name = "read_iolog",
+ .lname = "Read I/O log",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(read_iolog_file),
.help = "Playback IO pattern from file",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IOLOG,
},
{
.name = "replay_no_stall",
- .type = FIO_OPT_INT,
+ .lname = "Don't stall on replay",
+ .type = FIO_OPT_BOOL,
.off1 = td_var_offset(no_stall),
.def = "0",
.parent = "read_iolog",
+ .hide = 1,
.help = "Playback IO pattern file as fast as possible without stalls",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IOLOG,
},
{
.name = "replay_redirect",
+ .lname = "Redirect device for replay",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(replay_redirect),
.parent = "read_iolog",
+ .hide = 1,
.help = "Replay all I/O onto this device, regardless of trace device",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IOLOG,
},
{
.name = "exec_prerun",
+ .lname = "Pre-execute runnable",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(exec_prerun),
.help = "Execute this file prior to running job",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "exec_postrun",
+ .lname = "Post-execute runnable",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(exec_postrun),
.help = "Execute this file after running job",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_INVALID,
},
#ifdef FIO_HAVE_IOSCHED_SWITCH
{
.name = "ioscheduler",
+ .lname = "I/O scheduler",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(ioscheduler),
.help = "Use this IO scheduler on the backing device",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
#endif
{
.name = "zonesize",
+ .lname = "Zone size",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(zone_size),
.help = "Amount of data to read per zone",
.def = "0",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_ZONE,
},
{
.name = "zonerange",
+ .lname = "Zone range",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(zone_range),
.help = "Give size of an IO zone",
.def = "0",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_ZONE,
},
{
.name = "zoneskip",
+ .lname = "Zone skip",
.type = FIO_OPT_STR_VAL,
.off1 = td_var_offset(zone_skip),
.help = "Space between IO zones",
.def = "0",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_ZONE,
},
{
.name = "lockmem",
+ .lname = "Lock memory",
.type = FIO_OPT_STR_VAL,
- .cb = str_lockmem_cb,
+ .off1 = td_var_offset(lockmem),
.help = "Lock down this amount of memory",
.def = "0",
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "rwmixread",
+ .lname = "Read/write mix read",
.type = FIO_OPT_INT,
.cb = str_rwmix_read_cb,
.maxval = 100,
.help = "Percentage of mixed workload that is reads",
.def = "50",
+ .interval = 5,
+ .inverse = "rwmixwrite",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RWMIX,
},
{
.name = "rwmixwrite",
+ .lname = "Read/write mix write",
.type = FIO_OPT_INT,
.cb = str_rwmix_write_cb,
.maxval = 100,
.help = "Percentage of mixed workload that is writes",
.def = "50",
+ .interval = 5,
+ .inverse = "rwmixread",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RWMIX,
},
{
.name = "rwmixcycle",
+ .lname = "Read/write mix cycle",
.type = FIO_OPT_DEPRECATED,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RWMIX,
},
{
.name = "nice",
+ .lname = "Nice",
.type = FIO_OPT_INT,
.off1 = td_var_offset(nice),
.help = "Set job CPU nice value",
.minval = -19,
.maxval = 20,
.def = "0",
+ .interval = 1,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
},
#ifdef FIO_HAVE_IOPRIO
{
.name = "prio",
+ .lname = "I/O nice priority",
.type = FIO_OPT_INT,
- .cb = str_prio_cb,
+ .off1 = td_var_offset(ioprio),
.help = "Set job IO priority value",
.minval = 0,
.maxval = 7,
+ .interval = 1,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
},
{
.name = "prioclass",
+ .lname = "I/O nice priority class",
.type = FIO_OPT_INT,
- .cb = str_prioclass_cb,
+ .off1 = td_var_offset(ioprio_class),
.help = "Set job IO priority class",
.minval = 0,
.maxval = 3,
+ .interval = 1,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
},
#endif
{
.name = "thinktime",
+ .lname = "Thinktime",
.type = FIO_OPT_INT,
.off1 = td_var_offset(thinktime),
.help = "Idle time between IO buffers (usec)",
.def = "0",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_THINKTIME,
},
{
.name = "thinktime_spin",
+ .lname = "Thinktime spin",
.type = FIO_OPT_INT,
.off1 = td_var_offset(thinktime_spin),
.help = "Start think time by spinning this amount (usec)",
.def = "0",
.parent = "thinktime",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_THINKTIME,
},
{
.name = "thinktime_blocks",
+ .lname = "Thinktime blocks",
.type = FIO_OPT_INT,
.off1 = td_var_offset(thinktime_blocks),
.help = "IO buffer period between 'thinktime'",
.def = "1",
.parent = "thinktime",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_THINKTIME,
},
{
.name = "rate",
+ .lname = "I/O rate",
.type = FIO_OPT_INT,
.off1 = td_var_offset(rate[DDIR_READ]),
.off2 = td_var_offset(rate[DDIR_WRITE]),
.off3 = td_var_offset(rate[DDIR_TRIM]),
.help = "Set bandwidth rate",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RATE,
},
{
.name = "ratemin",
+ .lname = "I/O min rate",
.type = FIO_OPT_INT,
.off1 = td_var_offset(ratemin[DDIR_READ]),
.off2 = td_var_offset(ratemin[DDIR_WRITE]),
.off3 = td_var_offset(ratemin[DDIR_TRIM]),
.help = "Job must meet this rate or it will be shutdown",
.parent = "rate",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RATE,
},
{
.name = "rate_iops",
+ .lname = "I/O rate IOPS",
.type = FIO_OPT_INT,
.off1 = td_var_offset(rate_iops[DDIR_READ]),
.off2 = td_var_offset(rate_iops[DDIR_WRITE]),
.off3 = td_var_offset(rate_iops[DDIR_TRIM]),
.help = "Limit IO used to this number of IO operations/sec",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RATE,
},
{
.name = "rate_iops_min",
+ .lname = "I/O min rate IOPS",
.type = FIO_OPT_INT,
.off1 = td_var_offset(rate_iops_min[DDIR_READ]),
.off2 = td_var_offset(rate_iops_min[DDIR_WRITE]),
.off3 = td_var_offset(rate_iops_min[DDIR_TRIM]),
.help = "Job must meet this rate or it will be shut down",
.parent = "rate_iops",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RATE,
},
{
.name = "ratecycle",
+ .lname = "I/O rate cycle",
.type = FIO_OPT_INT,
.off1 = td_var_offset(ratecycle),
.help = "Window average for rate limits (msec)",
.def = "1000",
.parent = "rate",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RATE,
},
{
.name = "max_latency",
.type = FIO_OPT_INT,
.off1 = td_var_offset(max_latency),
.help = "Maximum tolerated IO latency (usec)",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_RATE,
},
{
.name = "invalidate",
+ .lname = "Cache invalidate",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(invalidate_cache),
.help = "Invalidate buffer/page cache prior to running job",
.def = "1",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_TYPE,
},
{
.name = "sync",
+ .lname = "Synchronous I/O",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(sync_io),
.help = "Use O_SYNC for buffered writes",
.def = "0",
.parent = "buffered",
- },
- {
- .name = "bwavgtime",
- .type = FIO_OPT_INT,
- .off1 = td_var_offset(bw_avg_time),
- .help = "Time window over which to calculate bandwidth"
- " (msec)",
- .def = "500",
- .parent = "write_bw_log",
- },
- {
- .name = "iopsavgtime",
- .type = FIO_OPT_INT,
- .off1 = td_var_offset(iops_avg_time),
- .help = "Time window over which to calculate IOPS (msec)",
- .def = "500",
- .parent = "write_iops_log",
+ .hide = 1,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_TYPE,
},
{
.name = "create_serialize",
+ .lname = "Create serialize",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(create_serialize),
.help = "Serialize creating of job files",
.def = "1",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "create_fsync",
+ .lname = "Create fsync",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(create_fsync),
.help = "fsync file after creation",
.def = "1",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "create_on_open",
+ .lname = "Create on open",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(create_on_open),
.help = "Create files when they are opened for IO",
.def = "0",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "create_only",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(create_only),
.help = "Only perform file creation phase",
+ .category = FIO_OPT_C_FILE,
.def = "0",
},
{
.name = "pre_read",
+ .lname = "Pre-read files",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(pre_read),
.help = "Pre-read files before starting official testing",
.def = "0",
- },
- {
- .name = "cpuload",
- .type = FIO_OPT_INT,
- .off1 = td_var_offset(cpuload),
- .help = "Use this percentage of CPU",
- },
- {
- .name = "cpuchunks",
- .type = FIO_OPT_INT,
- .off1 = td_var_offset(cpucycle),
- .help = "Length of the CPU burn cycles (usecs)",
- .def = "50000",
- .parent = "cpuload",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
#ifdef FIO_HAVE_CPU_AFFINITY
{
.name = "cpumask",
+ .lname = "CPU mask",
.type = FIO_OPT_INT,
.cb = str_cpumask_cb,
.help = "CPU affinity mask",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
},
{
.name = "cpus_allowed",
+ .lname = "CPUs allowed",
.type = FIO_OPT_STR,
.cb = str_cpus_allowed_cb,
.help = "Set CPUs allowed",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
},
#endif
#ifdef CONFIG_LIBNUMA
#endif
{
.name = "end_fsync",
+ .lname = "End fsync",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(end_fsync),
.help = "Include fsync at the end of job",
.def = "0",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "fsync_on_close",
+ .lname = "Fsync on close",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(fsync_on_close),
.help = "fsync files on close",
.def = "0",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "unlink",
+ .lname = "Unlink file",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(unlink),
.help = "Unlink created files after job has completed",
.def = "0",
+ .category = FIO_OPT_C_FILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "exitall",
+ .lname = "Exit-all on terminate",
.type = FIO_OPT_STR_SET,
.cb = str_exitall_cb,
.help = "Terminate all jobs when one exits",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_PROCESS,
},
{
.name = "stonewall",
+ .lname = "Wait for previous",
.alias = "wait_for_previous",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(stonewall),
.help = "Insert a hard barrier between this job and previous",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_PROCESS,
},
{
.name = "new_group",
+ .lname = "New group",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(new_group),
.help = "Mark the start of a new group (for reporting)",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_PROCESS,
},
{
.name = "thread",
+ .lname = "Thread",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(use_thread),
- .help = "Use threads instead of forks",
+ .help = "Use threads instead of processes",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_PROCESS,
},
{
.name = "write_bw_log",
- .type = FIO_OPT_STR,
- .off1 = td_var_offset(write_bw_log),
- .cb = str_write_bw_log_cb,
+ .lname = "Write bandwidth log",
+ .type = FIO_OPT_STR_STORE,
+ .off1 = td_var_offset(bw_log_file),
.help = "Write log of bandwidth during run",
+ .category = FIO_OPT_C_LOG,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "write_lat_log",
- .type = FIO_OPT_STR,
- .off1 = td_var_offset(write_lat_log),
- .cb = str_write_lat_log_cb,
+ .lname = "Write latency log",
+ .type = FIO_OPT_STR_STORE,
+ .off1 = td_var_offset(lat_log_file),
.help = "Write log of latency during run",
+ .category = FIO_OPT_C_LOG,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "write_iops_log",
+ .lname = "Write IOPS log",
.type = FIO_OPT_STR,
- .off1 = td_var_offset(write_iops_log),
- .cb = str_write_iops_log_cb,
+ .off1 = td_var_offset(iops_log_file),
.help = "Write log of IOPS during run",
+ .category = FIO_OPT_C_LOG,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "log_avg_msec",
+ .lname = "Log averaging (msec)",
.type = FIO_OPT_INT,
.off1 = td_var_offset(log_avg_msec),
.help = "Average bw/iops/lat logs over this period of time",
.def = "0",
+ .category = FIO_OPT_C_LOG,
+ .group = FIO_OPT_G_INVALID,
},
{
- .name = "hugepage-size",
+ .name = "bwavgtime",
+ .lname = "Bandwidth average time",
.type = FIO_OPT_INT,
- .off1 = td_var_offset(hugepage_size),
- .help = "When using hugepages, specify size of each page",
- .def = __fio_stringify(FIO_HUGE_PAGE),
+ .off1 = td_var_offset(bw_avg_time),
+ .help = "Time window over which to calculate bandwidth"
+ " (msec)",
+ .def = "500",
+ .parent = "write_bw_log",
+ .hide = 1,
+ .interval = 100,
+ .category = FIO_OPT_C_LOG,
+ .group = FIO_OPT_G_INVALID,
+ },
+ {
+ .name = "iopsavgtime",
+ .lname = "IOPS average time",
+ .type = FIO_OPT_INT,
+ .off1 = td_var_offset(iops_avg_time),
+ .help = "Time window over which to calculate IOPS (msec)",
+ .def = "500",
+ .parent = "write_iops_log",
+ .hide = 1,
+ .interval = 100,
+ .category = FIO_OPT_C_LOG,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "group_reporting",
- .type = FIO_OPT_STR_SET,
+ .lname = "Group reporting",
+ .type = FIO_OPT_BOOL,
.off1 = td_var_offset(group_reporting),
.help = "Do reporting on a per-group basis",
+ .def = "1",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "zero_buffers",
+ .lname = "Zero I/O buffers",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(zero_buffers),
.help = "Init IO buffers to all zeroes",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BUF,
},
{
.name = "refill_buffers",
+ .lname = "Refill I/O buffers",
.type = FIO_OPT_STR_SET,
.off1 = td_var_offset(refill_buffers),
.help = "Refill IO buffers on every IO submit",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BUF,
},
{
.name = "scramble_buffers",
+ .lname = "Scramble I/O buffers",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(scramble_buffers),
.help = "Slightly scramble buffers on every IO submit",
.def = "1",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BUF,
},
{
.name = "buffer_compress_percentage",
+ .lname = "Buffer compression percentage",
.type = FIO_OPT_INT,
.off1 = td_var_offset(compress_percentage),
.maxval = 100,
.minval = 1,
.help = "How compressible the buffer is (approximately)",
+ .interval = 5,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BUF,
},
{
.name = "buffer_compress_chunk",
+ .lname = "Buffer compression chunk size",
.type = FIO_OPT_INT,
.off1 = td_var_offset(compress_chunk),
.parent = "buffer_compress_percentage",
+ .hide = 1,
.help = "Size of compressible region in buffer",
+ .interval = 256,
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_BUF,
},
{
.name = "clat_percentiles",
+ .lname = "Completion latency percentiles",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(clat_percentiles),
.help = "Enable the reporting of completion latency percentiles",
.def = "1",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "percentile_list",
+ .lname = "Completion latency percentile list",
.type = FIO_OPT_FLOAT_LIST,
.off1 = td_var_offset(percentile_list),
.off2 = td_var_offset(overwrite_plist),
.maxlen = FIO_IO_U_LIST_MAX_LEN,
.minfp = 0.0,
.maxfp = 100.0,
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
#ifdef FIO_HAVE_DISK_UTIL
{
.name = "disk_util",
+ .lname = "Disk utilization",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(do_disk_util),
.help = "Log disk utilization statistics",
.def = "1",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
#endif
{
.name = "gtod_reduce",
+ .lname = "Reduce gettimeofday() calls",
.type = FIO_OPT_BOOL,
.help = "Greatly reduce number of gettimeofday() calls",
.cb = str_gtod_reduce_cb,
.def = "0",
+ .hide_on_set = 1,
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "disable_lat",
+ .lname = "Disable all latency stats",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(disable_lat),
.help = "Disable latency numbers",
.parent = "gtod_reduce",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "disable_clat",
+ .lname = "Disable completion latency stats",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(disable_clat),
.help = "Disable completion latency numbers",
.parent = "gtod_reduce",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "disable_slat",
+ .lname = "Disable submission latency stats",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(disable_slat),
.help = "Disable submission latency numbers",
.parent = "gtod_reduce",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "disable_bw_measurement",
+ .lname = "Disable bandwidth stats",
.type = FIO_OPT_BOOL,
.off1 = td_var_offset(disable_bw),
.help = "Disable bandwidth logging",
.parent = "gtod_reduce",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_STAT,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "gtod_cpu",
+ .lname = "Dedicated gettimeofday() CPU",
.type = FIO_OPT_INT,
.cb = str_gtod_cpu_cb,
.help = "Set up dedicated gettimeofday() thread on this CPU",
.verify = gtod_cpu_verify,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CLOCK,
},
{
.name = "continue_on_error",
+ .lname = "Continue on error",
.type = FIO_OPT_STR,
.off1 = td_var_offset(continue_on_error),
.help = "Continue on non-fatal errors during IO",
.def = "none",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_ERR,
.posval = {
{ .ival = "none",
.oval = ERROR_TYPE_NONE,
.cb = str_ignore_error_cb,
.help = "Set a specific list of errors to ignore",
.parent = "rw",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_ERR,
},
{
.name = "error_dump",
.off1 = td_var_offset(error_dump),
.def = "0",
.help = "Dump info on each error",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_ERR,
},
-
{
.name = "profile",
+ .lname = "Profile",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(profile),
.help = "Select a specific builtin performance test",
+ .category = FIO_OPT_C_PROFILE,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "cgroup",
+ .lname = "Cgroup",
.type = FIO_OPT_STR_STORE,
.off1 = td_var_offset(cgroup),
.help = "Add job to cgroup of this name",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CGROUP,
+ },
+ {
+ .name = "cgroup_nodelete",
+ .lname = "Cgroup no-delete",
+ .type = FIO_OPT_BOOL,
+ .off1 = td_var_offset(cgroup_nodelete),
+ .help = "Do not delete cgroups after job completion",
+ .def = "0",
+ .parent = "cgroup",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CGROUP,
},
{
.name = "cgroup_weight",
+ .lname = "Cgroup weight",
.type = FIO_OPT_INT,
.off1 = td_var_offset(cgroup_weight),
.help = "Use given weight for cgroup",
.minval = 100,
.maxval = 1000,
- },
- {
- .name = "cgroup_nodelete",
- .type = FIO_OPT_BOOL,
- .off1 = td_var_offset(cgroup_nodelete),
- .help = "Do not delete cgroups after job completion",
- .def = "0",
+ .parent = "cgroup",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CGROUP,
},
{
.name = "uid",
+ .lname = "User ID",
.type = FIO_OPT_INT,
.off1 = td_var_offset(uid),
.help = "Run job with this user ID",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
},
{
.name = "gid",
+ .lname = "Group ID",
.type = FIO_OPT_INT,
.off1 = td_var_offset(gid),
.help = "Run job with this group ID",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_CRED,
+ },
+ {
+ .name = "kb_base",
+ .lname = "KB Base",
+ .type = FIO_OPT_INT,
+ .off1 = td_var_offset(kb_base),
+ .verify = kb_base_verify,
+ .prio = 1,
+ .def = "1024",
+ .help = "How many bytes per KB for reporting (1000 or 1024)",
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_INVALID,
+ },
+ {
+ .name = "hugepage-size",
+ .lname = "Hugepage size",
+ .type = FIO_OPT_INT,
+ .off1 = td_var_offset(hugepage_size),
+ .help = "When using hugepages, specify size of each page",
+ .def = __fio_stringify(FIO_HUGE_PAGE),
+ .interval = 1024 * 1024,
+ .category = FIO_OPT_C_GENERAL,
+ .group = FIO_OPT_G_INVALID,
},
{
.name = "flow_id",
+ .lname = "I/O flow ID",
.type = FIO_OPT_INT,
.off1 = td_var_offset(flow_id),
.help = "The flow index ID to use",
.def = "0",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_FLOW,
},
{
.name = "flow",
+ .lname = "I/O flow weight",
.type = FIO_OPT_INT,
.off1 = td_var_offset(flow),
.help = "Weight for flow control of this job",
.parent = "flow_id",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_FLOW,
},
{
.name = "flow_watermark",
+ .lname = "I/O flow watermark",
.type = FIO_OPT_INT,
.off1 = td_var_offset(flow_watermark),
.help = "High watermark for flow control. This option"
" should be set to the same value for all threads"
" with non-zero flow.",
.parent = "flow_id",
+ .hide = 1,
.def = "1024",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_FLOW,
},
{
.name = "flow_sleep",
+ .lname = "I/O flow sleep",
.type = FIO_OPT_INT,
.off1 = td_var_offset(flow_sleep),
.help = "How many microseconds to sleep after being held"
" back by the flow control mechanism",
.parent = "flow_id",
+ .hide = 1,
.def = "0",
+ .category = FIO_OPT_C_IO,
+ .group = FIO_OPT_G_IO_FLOW,
},
{
.name = NULL,
{
unsigned int i;
- options_init(options);
+ options_init(fio_options);
i = 0;
while (long_options[i].name)
i++;
- options_to_lopts(options, long_options, i, FIO_GETOPT_JOB);
+ options_to_lopts(fio_options, long_options, i, FIO_GETOPT_JOB);
}
struct fio_keyword {
sprintf(buf, "echo '%s' | %s", tmp, BC_APP);
f = popen(buf, "r");
- if (!f) {
+ if (!f)
return NULL;
- }
ret = fread(&buf[tmp - str], 1, 128 - (tmp - str), f);
- if (ret <= 0) {
+ if (ret <= 0)
return NULL;
- }
pclose(f);
buf[(tmp - str) + ret - 1] = '\0';
int i, ret, unknown;
char **opts_copy;
- sort_options(opts, options, num_opts);
+ sort_options(opts, fio_options, num_opts);
opts_copy = dup_and_sub_options(opts, num_opts);
for (ret = 0, i = 0, unknown = 0; i < num_opts; i++) {
struct fio_option *o;
- int newret = parse_option(opts_copy[i], opts[i], options, &o,
- td);
+ int newret = parse_option(opts_copy[i], opts[i], fio_options,
+ &o, td);
if (opts_copy[i]) {
if (newret && !o) {
int fio_cmd_option_parse(struct thread_data *td, const char *opt, char *val)
{
- return parse_cmd_option(opt, val, options, td);
+ return parse_cmd_option(opt, val, fio_options, td);
}
int fio_cmd_ioengine_option_parse(struct thread_data *td, const char *opt,
void fio_fill_default_options(struct thread_data *td)
{
- fill_default_options(td, options);
+ fill_default_options(td, fio_options);
}
int fio_show_option_help(const char *opt)
{
- return show_cmd_help(options, opt);
+ return show_cmd_help(fio_options, opt);
}
void options_mem_dupe(void *data, struct fio_option *options)
*/
void fio_options_mem_dupe(struct thread_data *td)
{
- options_mem_dupe(&td->o, options);
+ options_mem_dupe(&td->o, fio_options);
if (td->eo && td->io_ops) {
void *oldeo = td->eo;
unsigned int fio_get_kb_base(void *data)
{
- struct thread_data *td = data;
+ struct thread_options *o = data;
unsigned int kb_base = 0;
- if (td)
- kb_base = td->o.kb_base;
+ if (o)
+ kb_base = o->kb_base;
if (!kb_base)
kb_base = 1024;
struct fio_option *__o;
int opt_index = 0;
- __o = options;
+ __o = fio_options;
while (__o->name) {
opt_index++;
__o++;
}
- memcpy(&options[opt_index], o, sizeof(*o));
+ memcpy(&fio_options[opt_index], o, sizeof(*o));
return 0;
}
{
struct fio_option *o;
- o = options;
+ o = fio_options;
while (o->name) {
if (o->prof_name && !strcmp(o->prof_name, prof_name)) {
o->type = FIO_OPT_INVALID;
struct fio_option *o;
unsigned int i;
- o = find_option(options, optname);
+ o = find_option(fio_options, optname);
if (!o)
return;
struct fio_option *o;
unsigned int i;
- o = find_option(options, optname);
+ o = find_option(fio_options, optname);
if (!o)
return;
void fio_options_free(struct thread_data *td)
{
- options_free(options, td);
+ options_free(fio_options, td);
if (td->eo && td->io_ops && td->io_ops->options) {
options_free(td->io_ops->options, td->eo);
free(td->eo);
td->eo = NULL;
}
}
+
+struct fio_option *fio_option_find(const char *name)
+{
+ return find_option(fio_options, name);
+}
+
projects / fio.git / commitdiff