X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=options.c;h=e0f6422ba173f14a86f8d4e0b198413accabab29;hp=f9bd1a44225cd6f4769952392d0b39a0ce8b0e5d;hb=591e9e0653dd8f5d8464b2896434a01ab742a3b1;hpb=b8bc8cba9512c6dce4891fda86de675053605ca2

diff --git a/options.c b/options.c
index f9bd1a44..e0f6422b 100644
--- a/options.c
+++ b/options.c
@@ -245,12 +245,9 @@ static int str_verify_cb(void *data, const char *mem)
 {
 	struct thread_data *td = data;
 
-	if (td->o.verify != VERIFY_CRC32C_INTEL)
-		return 0;
-
-	if (!crc32c_intel_works()) {
-		log_info("fio: System does not support hw accelerated crc32c. Falling back to sw crc32c.\n");
-		td->o.verify = VERIFY_CRC32C;
+	if (td->o.verify == VERIFY_CRC32C_INTEL ||
+	    td->o.verify == VERIFY_CRC32C) {
+		crc32c_intel_probe();
 	}
 
 	return 0;
@@ -689,12 +686,32 @@ static int str_verify_pattern_cb(void *data, const char *input)
 			}
 		}
 	}
+
+	/*
+	 * Fill the pattern all the way to the end. This greatly reduces
+	 * the number of memcpy's we have to do when verifying the IO.
+	 */
+	while (i > 1 && i * 2 <= MAX_PATTERN_SIZE) {
+		memcpy(&td->o.verify_pattern[i], &td->o.verify_pattern[0], i);
+		i *= 2;
+	}
+	if (i == 1) {
+		/*
+		 * The code in verify_io_u_pattern assumes a single byte pattern
+		 * fills the whole verify pattern buffer.
+		 */
+		memset(td->o.verify_pattern, td->o.verify_pattern[0],
+		       MAX_PATTERN_SIZE);
+	}
+
 	td->o.verify_pattern_bytes = i;
+
 	/*
 	 * VERIFY_META could already be set
 	 */
 	if (td->o.verify == VERIFY_NONE)
 		td->o.verify = VERIFY_PATTERN;
+
 	return 0;
 }
 
@@ -1462,12 +1479,12 @@ static struct fio_option options[FIO_MAX_OPTS] = {
 			    .help = "Use crc32 checksums for verification",
 			  },
 			  { .ival = "crc32c-intel",
-			    .oval = VERIFY_CRC32C_INTEL,
-			    .help = "Use hw crc32c checksums for verification",
+			    .oval = VERIFY_CRC32C,
+			    .help = "Use crc32c checksums for verification (hw assisted, if available)",
 			  },
 			  { .ival = "crc32c",
 			    .oval = VERIFY_CRC32C,
-			    .help = "Use crc32c checksums for verification",
+			    .help = "Use crc32c checksums for verification (hw assisted, if available)",
 			  },
 			  { .ival = "crc16",
 			    .oval = VERIFY_CRC16,
@@ -1670,6 +1687,13 @@ static struct fio_option options[FIO_MAX_OPTS] = {
 		.name	= "zonesize",
 		.type	= FIO_OPT_STR_VAL,
 		.off1	= td_var_offset(zone_size),
+		.help	= "Amount of data to read per zone",
+		.def	= "0",
+	},
+	{
+		.name	= "zonerange",
+		.type	= FIO_OPT_STR_VAL,
+		.off1	= td_var_offset(zone_range),
 		.help	= "Give size of an IO zone",
 		.def	= "0",
 	},
@@ -1989,6 +2013,21 @@ static struct fio_option options[FIO_MAX_OPTS] = {
 		.help	= "Slightly scramble buffers on every IO submit",
 		.def	= "1",
 	},
+	{
+		.name	= "buffer_compress_percentage",
+		.type	= FIO_OPT_INT,
+		.off1	= td_var_offset(compress_percentage),
+		.maxval	= 100,
+		.minval	= 1,
+		.help	= "How compressible the buffer is (approximately)",
+	},
+	{
+		.name	= "buffer_compress_chunk",
+		.type	= FIO_OPT_INT,
+		.off1	= td_var_offset(compress_chunk),
+		.parent	= "buffer_compress_percentage",
+		.help	= "Size of compressible region in buffer",
+	},
 	{
 		.name	= "clat_percentiles",
 		.type	= FIO_OPT_BOOL,
@@ -2142,6 +2181,47 @@ static struct fio_option options[FIO_MAX_OPTS] = {
 		.off1	= td_var_offset(gid),
 		.help	= "Run job with this group ID",
 	},
+	{
+		.name	= "flow_id",
+		.type	= FIO_OPT_INT,
+		.off1	= td_var_offset(flow_id),
+		.help	= "The flow index ID to use",
+		.def	= "0",
+	},
+	{
+		.name	= "flow",
+		.type	= FIO_OPT_INT,
+		.off1	= td_var_offset(flow),
+		.help	= "Weight for flow control of this job",
+		.parent	= "flow_id",
+		.def	= "0",
+	},
+	{
+		.name	= "flow_watermark",
+		.type	= FIO_OPT_INT,
+		.off1	= td_var_offset(flow_watermark),
+		.help	= "High watermark for flow control. This option"
+			" should be set to the same value for all threads"
+			" with non-zero flow.",
+		.parent	= "flow_id",
+		.def	= "1024",
+	},
+	{
+		.name	= "flow_sleep",
+		.type	= FIO_OPT_INT,
+		.off1	= td_var_offset(flow_sleep),
+		.help	= "How many microseconds to sleep after being held"
+			" back by the flow control mechanism",
+		.parent	= "flow_id",
+		.def	= "0",
+	},
+	{
+		.name	= "offset_increment",
+		.type	= FIO_OPT_STR_VAL,
+		.off1	= td_var_offset(offset_increment),
+		.help	= "What is the increment from one offset to the next",
+		.def	= "0",
+	},
 	{
 		.name = NULL,
 	},