X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=fio.1;h=e54e419b2f5852733c7312a44defcf0345be7591;hp=33b26ccadac74a457b94c77437bf7c08d869f7ba;hb=0c63576e14bc606f81441f20e58a5b6338a5e2d6;hpb=a4d3b4dbf594be6223a21a47a7ce4c21c7dddaf0

diff --git a/fio.1 b/fio.1
index 33b26cca..e54e419b 100644
--- a/fio.1
+++ b/fio.1
@@ -20,6 +20,9 @@ list all available tracing options.
 .BI \-\-output \fR=\fPfilename
 Write output to \fIfilename\fR.
 .TP
+.BI \-\-output-format \fR=\fPformat
+Set the reporting format to \fInormal\fR, \fIterse\fR, or \fIjson\fR.
+.TP
 .BI \-\-runtime \fR=\fPruntime
 Limit run time to \fIruntime\fR seconds.
 .TP
@@ -283,6 +286,10 @@ Mixed sequential reads and writes.
 .TP
 .B randrw 
 Mixed random reads and writes.
+.TP
+.B trimwrite
+Trim and write mixed workload. Blocks will be trimmed first, then the same
+blocks will be written to.
 .RE
 .P
 For mixed I/O, the default split is 50/50. For certain types of io the result
@@ -375,6 +382,11 @@ because ZFS doesn't support it. Default: 'posix'.
 Use \fBposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
 are likely to be issued. Default: true.
 .TP
+.BI fadvise_stream \fR=\fPint
+Use \fBposix_fadvise\fR\|(2) to advise the kernel what stream ID the
+writes issued belong to. Only supported on Linux. Note, this option
+may change going forward.
+.TP
 .BI size \fR=\fPint
 Total size of I/O for this job.  \fBfio\fR will run until this many bytes have
 been transferred, unless limited by other options (\fBruntime\fR, for instance,
@@ -459,8 +471,6 @@ blocksize setting.
 .TP
 .B zero_buffers
 Initialize buffers with all zeros. Default: fill buffers with random data.
-The resulting IO buffers will not be completely zeroed, unless
-\fPscramble_buffers\fR is also turned off.
 .TP
 .B refill_buffers
 If this option is given, fio will refill the IO buffers on every submit. The
@@ -649,6 +659,13 @@ file out of those files based on the offset generated by fio backend. (see the
 example job file to create such files, use rw=write option). Please note, you
 might want to set necessary environment variables to work with hdfs/libhdfs
 properly.
+.TP
+.B mtd
+Read, write and erase an MTD character device (e.g., /dev/mtd0). Discards are
+treated as erases. Depending on the underlying device type, the I/O may have
+to go in a certain pattern, e.g., on NAND, writing sequentially to erase blocks
+and discarding before overwriting. The writetrim mode works well for this
+constraint.
 .RE
 .P
 .RE
@@ -677,6 +694,17 @@ cost of more retrieval system calls.
 Low watermark indicating when to start filling the queue again.  Default:
 \fBiodepth\fR. 
 .TP
+.BI io_submit_mode \fR=\fPstr
+This option controls how fio submits the IO to the IO engine. The default is
+\fBinline\fR, which means that the fio job threads submit and reap IO directly.
+If set to \fBoffload\fR, the job threads will offload IO submission to a
+dedicated pool of IO threads. This requires some coordination and thus has a
+bit of extra overhead, especially for lower queue depth IO where it can
+increase latencies. The benefit is that fio can manage submission rates
+independently of the device completion rates. This avoids skewed latency
+reporting if IO gets back up on the device side (the coordinated omission
+problem).
+.TP
 .BI direct \fR=\fPbool
 If true, use non-buffered I/O (usually O_DIRECT).  Default: false.
 .TP
@@ -1237,6 +1265,12 @@ is to replay the IOPS onto the major/minor device that each IOP was recorded
 from.  Setting \fBreplay_redirect\fR causes all IOPS to be replayed onto the
 single specified device regardless of the device it was recorded from.
 .TP
+.BI replay_align \fR=\fPint
+Force alignment of IO offsets and lengths in a trace to this power of 2 value.
+.TP
+.BI replay_scale \fR=\fPint
+Scale sector offsets down by this factor when replaying traces.
+.TP
 .BI write_bw_log \fR=\fPstr
 If given, write a bandwidth log of the jobs in this job file. Can be used to
 store data of the bandwidth of the jobs in their lifetime. The included
@@ -1286,6 +1320,11 @@ a compressed format. They can be decompressed with fio, using the
 \fB\-\-inflate-log\fR command line parameter. The files will be stored with a
 \fB\.fz\fR suffix.
 .TP
+.BI block_error_percentiles \fR=\fPbool
+If set, record errors in trim block-sized units from writes and trims and output
+a histogram of how many trims it took to get to errors, and what kind of error
+was encountered.
+.TP
 .BI disable_lat \fR=\fPbool
 Disable measurements of total latency numbers. Useful only for cutting
 back the number of calls to \fBgettimeofday\fR\|(2), as that does impact performance at
@@ -1444,9 +1483,9 @@ exceeded before retrying operations
 Enable the reporting of percentiles of completion latencies.
 .TP
 .BI percentile_list \fR=\fPfloat_list
-Overwrite the default list of percentiles for completion
-latencies. Each number is a floating number in the range (0,100], and
-the maximum length of the list is 20. Use ':' to separate the
+Overwrite the default list of percentiles for completion latencies and the
+block error histogram. Each number is a floating number in the range (0,100],
+and the maximum length of the list is 20. Use ':' to separate the
 numbers. For example, \-\-percentile_list=99.5:99.9 will cause fio to
 report the values of completion latency below which 99.5% and 99.9% of
 the observed latencies fell, respectively.
@@ -1561,6 +1600,9 @@ Specifies the name of the Ceph pool containing the RBD.
 .TP
 .BI (rbd)clientname \fR=\fPstr
 Specifies the username (without the 'client.' prefix) used to access the Ceph cluster.
+.TP
+.BI (mtd)skipbad \fR=\fPbool
+Skip operations against known bad blocks.
 .SH OUTPUT
 While running, \fBfio\fR will display the status of the created jobs.  For
 example: