X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=backend.c;h=93e66325f08569ec23fee63eb020065191d30616;hp=022122a2d9914ca78a6406075e41e3c58b58242a;hb=621677626f2551bedfdc4a5fc3b3e5f8492b94fa;hpb=b7f487cf80a8299a656df9c2214ff73e72956d71

diff --git a/backend.c b/backend.c
index 022122a2..93e66325 100644
--- a/backend.c
+++ b/backend.c
@@ -238,8 +238,6 @@ static int check_min_rate(struct thread_data *td, struct timeval *now,
  */
 static void cleanup_pending_aio(struct thread_data *td)
 {
-	struct flist_head *entry, *n;
-	struct io_u *io_u;
 	int r;
 
 	/*
@@ -253,18 +251,11 @@ static void cleanup_pending_aio(struct thread_data *td)
 	 * now cancel remaining active events
 	 */
 	if (td->io_ops->cancel) {
-		flist_for_each_safe(entry, n, &td->io_u_busylist) {
-			io_u = flist_entry(entry, struct io_u, list);
+		struct io_u *io_u;
+		int i;
 
-			/*
-			 * if the io_u isn't in flight, then that generally
-			 * means someone leaked an io_u. complain but fix
-			 * it up, so we don't stall here.
-			 */
-			if ((io_u->flags & IO_U_F_FLIGHT) == 0) {
-				log_err("fio: non-busy IO on busy list\n");
-				put_io_u(td, io_u);
-			} else {
+		io_u_qiter(&td->io_u_all, io_u, i) {
+			if (io_u->flags & IO_U_F_FLIGHT) {
 				r = td->io_ops->cancel(td, io_u);
 				if (!r)
 					put_io_u(td, io_u);
@@ -651,12 +642,15 @@ static uint64_t do_io(struct thread_data *td)
 	uint64_t bytes_done[DDIR_RWDIR_CNT] = { 0, 0, 0 };
 	unsigned int i;
 	int ret = 0;
+	uint64_t bytes_issued = 0;
 
 	if (in_ramp_time(td))
 		td_set_runstate(td, TD_RAMP);
 	else
 		td_set_runstate(td, TD_RUNNING);
 
+	lat_target_init(td);
+
 	while ((td->o.read_iolog_file && !flist_empty(&td->io_log_list)) ||
 		(!flist_empty(&td->trim_list)) || !io_bytes_exceeded(td) ||
 		td->o.time_based) {
@@ -684,9 +678,15 @@ static uint64_t do_io(struct thread_data *td)
 		if (flow_threshold_exceeded(td))
 			continue;
 
+		if (bytes_issued >= (uint64_t) td->o.size)
+			break;
+
 		io_u = get_io_u(td);
-		if (!io_u)
+		if (!io_u) {
+			if (td->o.latency_target)
+				goto reap;
 			break;
+		}
 
 		ddir = io_u->ddir;
 
@@ -717,6 +717,7 @@ static uint64_t do_io(struct thread_data *td)
 				int bytes = io_u->xfer_buflen - io_u->resid;
 				struct fio_file *f = io_u->file;
 
+				bytes_issued += bytes;
 				/*
 				 * zero read, fail
 				 */
@@ -747,6 +748,7 @@ sync_done:
 				ret = io_u_sync_complete(td, io_u, bytes_done);
 				if (ret < 0)
 					break;
+				bytes_issued += io_u->xfer_buflen;
 			}
 			break;
 		case FIO_Q_QUEUED:
@@ -757,6 +759,7 @@ sync_done:
 			 */
 			if (td->io_ops->commit == NULL)
 				io_u_queued(td, io_u);
+			bytes_issued += io_u->xfer_buflen;
 			break;
 		case FIO_Q_BUSY:
 			requeue_io_u(td, &io_u);
@@ -778,6 +781,7 @@ sync_done:
 		 * can get BUSY even without IO queued, if the system is
 		 * resource starved.
 		 */
+reap:
 		full = queue_full(td) || (ret == FIO_Q_BUSY && td->cur_depth);
 		if (full || !td->o.iodepth_batch_complete) {
 			min_evts = min(td->o.iodepth_batch_complete,
@@ -814,6 +818,8 @@ sync_done:
 				break;
 			}
 		}
+		if (!in_ramp_time(td) && td->o.latency_target)
+			lat_target_check(td);
 
 		if (td->o.thinktime) {
 			unsigned long long b;
@@ -822,6 +828,8 @@ sync_done:
 			if (!(b % td->o.thinktime_blocks)) {
 				int left;
 
+				io_u_quiesce(td);
+
 				if (td->o.thinktime_spin)
 					usec_spin(td->o.thinktime_spin);
 
@@ -835,7 +843,7 @@ sync_done:
 	check_update_rusage(td);
 
 	if (td->trim_entries)
-		log_err("fio: %d trim entries leaked?\n", td->trim_entries);
+		log_err("fio: %lu trim entries leaked?\n", td->trim_entries);
 
 	if (td->o.fill_device && td->error == ENOSPC) {
 		td->error = 0;
@@ -876,13 +884,9 @@ sync_done:
 
 static void cleanup_io_u(struct thread_data *td)
 {
-	struct flist_head *entry, *n;
 	struct io_u *io_u;
 
-	flist_for_each_safe(entry, n, &td->io_u_freelist) {
-		io_u = flist_entry(entry, struct io_u, list);
-
-		flist_del(&io_u->list);
+	while ((io_u = io_u_qpop(&td->io_u_freelist)) != NULL) {
 
 		if (td->io_ops->io_u_free)
 			td->io_ops->io_u_free(td, io_u);
@@ -891,6 +895,10 @@ static void cleanup_io_u(struct thread_data *td)
 	}
 
 	free_io_mem(td);
+
+	io_u_rexit(&td->io_u_requeues);
+	io_u_qexit(&td->io_u_freelist);
+	io_u_qexit(&td->io_u_all);
 }
 
 static int init_io_u(struct thread_data *td)
@@ -898,7 +906,7 @@ static int init_io_u(struct thread_data *td)
 	struct io_u *io_u;
 	unsigned int max_bs, min_write;
 	int cl_align, i, max_units;
-	int data_xfer = 1;
+	int data_xfer = 1, err;
 	char *p;
 
 	max_units = td->o.iodepth;
@@ -910,6 +918,26 @@ static int init_io_u(struct thread_data *td)
 	if ((td->io_ops->flags & FIO_NOIO) || !(td_read(td) || td_write(td)))
 		data_xfer = 0;
 
+	err = 0;
+	err += io_u_rinit(&td->io_u_requeues, td->o.iodepth);
+	err += io_u_qinit(&td->io_u_freelist, td->o.iodepth);
+	err += io_u_qinit(&td->io_u_all, td->o.iodepth);
+
+	if (err) {
+		log_err("fio: failed setting up IO queues\n");
+		return 1;
+	}
+
+	/*
+	 * if we may later need to do address alignment, then add any
+	 * possible adjustment here so that we don't cause a buffer
+	 * overflow later. this adjustment may be too much if we get
+	 * lucky and the allocator gives us an aligned address.
+	 */
+	if (td->o.odirect || td->o.mem_align || td->o.oatomic ||
+	    (td->io_ops->flags & FIO_RAWIO))
+		td->orig_buffer_size += page_mask + td->o.mem_align;
+
 	if (td->o.mem_type == MEM_SHMHUGE || td->o.mem_type == MEM_MMAPHUGE) {
 		unsigned long bs;
 
@@ -925,7 +953,7 @@ static int init_io_u(struct thread_data *td)
 	if (data_xfer && allocate_io_mem(td))
 		return 1;
 
-	if (td->o.odirect || td->o.mem_align ||
+	if (td->o.odirect || td->o.mem_align || td->o.oatomic ||
 	    (td->io_ops->flags & FIO_RAWIO))
 		p = PAGE_ALIGN(td->orig_buffer) + td->o.mem_align;
 	else
@@ -947,7 +975,7 @@ static int init_io_u(struct thread_data *td)
 
 		io_u = ptr;
 		memset(io_u, 0, sizeof(*io_u));
-		INIT_FLIST_HEAD(&io_u->list);
+		INIT_FLIST_HEAD(&io_u->verify_list);
 		dprint(FD_MEM, "io_u alloc %p, index %u\n", io_u, i);
 
 		if (data_xfer) {
@@ -961,13 +989,19 @@ static int init_io_u(struct thread_data *td)
 				 * Fill the buffer with the pattern if we are
 				 * going to be doing writes.
 				 */
-				fill_pattern(td, io_u->buf, max_bs, io_u, 0, 0);
+				fill_verify_pattern(td, io_u->buf, max_bs, io_u, 0, 0);
 			}
 		}
 
 		io_u->index = i;
 		io_u->flags = IO_U_F_FREE;
-		flist_add(&io_u->list, &td->io_u_freelist);
+		io_u_qpush(&td->io_u_freelist, io_u);
+
+		/*
+		 * io_u never leaves this stack, used for iteration of all
+		 * io_u buffers.
+		 */
+		io_u_qpush(&td->io_u_all, io_u);
 
 		if (td->io_ops->io_u_init) {
 			int ret = td->io_ops->io_u_init(td, io_u);
@@ -1068,14 +1102,15 @@ static int keep_running(struct thread_data *td)
 	return 0;
 }
 
-static int exec_string(const char *string)
+static int exec_string(struct thread_options *o, const char *string, const char *mode)
 {
-	int ret, newlen = strlen(string) + 1 + 8;
+	int ret, newlen = strlen(string) + strlen(o->name) + strlen(mode) + 9 + 1;
 	char *str;
 
 	str = malloc(newlen);
-	sprintf(str, "sh -c %s", string);
+	sprintf(str, "%s &> %s.%s.txt", string, o->name, mode);
 
+	log_info("%s : Saving output of %s in %s.%s.txt\n",o->name, mode, o->name, mode);
 	ret = system(str);
 	if (ret == -1)
 		log_err("fio: exec of cmd <%s> failed\n", str);
@@ -1084,6 +1119,44 @@ static int exec_string(const char *string)
 	return ret;
 }
 
+/*
+ * Dry run to compute correct state of numberio for verification.
+ */
+static uint64_t do_dry_run(struct thread_data *td)
+{
+	uint64_t bytes_done[DDIR_RWDIR_CNT] = { 0, 0, 0 };
+
+	td_set_runstate(td, TD_RUNNING);
+
+	while ((td->o.read_iolog_file && !flist_empty(&td->io_log_list)) ||
+		(!flist_empty(&td->trim_list)) || !io_bytes_exceeded(td)) {
+		struct io_u *io_u;
+		int ret;
+
+		if (td->terminate || td->done)
+			break;
+
+		io_u = get_io_u(td);
+		if (!io_u)
+			break;
+
+		io_u->flags |= IO_U_F_FLIGHT;
+		io_u->error = 0;
+		io_u->resid = 0;
+		if (ddir_rw(acct_ddir(io_u)))
+			td->io_issues[acct_ddir(io_u)]++;
+		if (ddir_rw(io_u->ddir)) {
+			io_u_mark_depth(td, 1);
+			td->ts.total_io_u[io_u->ddir]++;
+		}
+
+		ret = io_u_sync_complete(td, io_u, bytes_done);
+		(void) ret;
+	}
+
+	return bytes_done[DDIR_WRITE] + bytes_done[DDIR_TRIM];
+}
+
 /*
  * Entry point for the thread based jobs. The process based jobs end up
  * here as well, after a little setup.
@@ -1103,16 +1176,18 @@ static void *thread_main(void *data)
 	} else
 		td->pid = gettid();
 
-	fio_local_clock_init(td->o.use_thread);
+	/*
+	 * fio_time_init() may not have been called yet if running as a server
+	 */
+	fio_time_init();
+
+	fio_local_clock_init(o->use_thread);
 
 	dprint(FD_PROCESS, "jobs pid=%d started\n", (int) td->pid);
 
 	if (is_backend)
 		fio_server_send_start(td);
 
-	INIT_FLIST_HEAD(&td->io_u_freelist);
-	INIT_FLIST_HEAD(&td->io_u_busylist);
-	INIT_FLIST_HEAD(&td->io_u_requeues);
 	INIT_FLIST_HEAD(&td->io_log_list);
 	INIT_FLIST_HEAD(&td->io_hist_list);
 	INIT_FLIST_HEAD(&td->verify_list);
@@ -1173,7 +1248,7 @@ static void *thread_main(void *data)
 
 #ifdef CONFIG_LIBNUMA
 	/* numa node setup */
-	if (td->o.numa_cpumask_set || td->o.numa_memmask_set) {
+	if (o->numa_cpumask_set || o->numa_memmask_set) {
 		int ret;
 
 		if (numa_available() < 0) {
@@ -1181,8 +1256,8 @@ static void *thread_main(void *data)
 			goto err;
 		}
 
-		if (td->o.numa_cpumask_set) {
-			ret = numa_run_on_node_mask(td->o.numa_cpunodesmask);
+		if (o->numa_cpumask_set) {
+			ret = numa_run_on_node_mask(o->numa_cpunodesmask);
 			if (ret == -1) {
 				td_verror(td, errno, \
 					"numa_run_on_node_mask failed\n");
@@ -1190,20 +1265,20 @@ static void *thread_main(void *data)
 			}
 		}
 
-		if (td->o.numa_memmask_set) {
+		if (o->numa_memmask_set) {
 
-			switch (td->o.numa_mem_mode) {
+			switch (o->numa_mem_mode) {
 			case MPOL_INTERLEAVE:
-				numa_set_interleave_mask(td->o.numa_memnodesmask);
+				numa_set_interleave_mask(o->numa_memnodesmask);
 				break;
 			case MPOL_BIND:
-				numa_set_membind(td->o.numa_memnodesmask);
+				numa_set_membind(o->numa_memnodesmask);
 				break;
 			case MPOL_LOCAL:
 				numa_set_localalloc();
 				break;
 			case MPOL_PREFERRED:
-				numa_set_preferred(td->o.numa_mem_prefer_node);
+				numa_set_preferred(o->numa_mem_prefer_node);
 				break;
 			case MPOL_DEFAULT:
 			default:
@@ -1214,6 +1289,9 @@ static void *thread_main(void *data)
 	}
 #endif
 
+	if (fio_pin_memory(td))
+		goto err;
+
 	/*
 	 * May alter parameters that init_io_u() will use, so we need to
 	 * do this first.
@@ -1235,7 +1313,7 @@ static void *thread_main(void *data)
 		}
 	}
 
-	if (td->o.cgroup && cgroup_setup(td, cgroup_list, &cgroup_mnt))
+	if (o->cgroup && cgroup_setup(td, cgroup_list, &cgroup_mnt))
 		goto err;
 
 	errno = 0;
@@ -1256,7 +1334,7 @@ static void *thread_main(void *data)
 	if (init_random_map(td))
 		goto err;
 
-	if (o->exec_prerun && exec_string(o->exec_prerun))
+	if (o->exec_prerun && exec_string(o, o->exec_prerun, (const char *)"prerun"))
 		goto err;
 
 	if (o->pre_read) {
@@ -1277,8 +1355,8 @@ static void *thread_main(void *data)
 		memcpy(&td->iops_sample_time, &td->start, sizeof(td->start));
 		memcpy(&td->tv_cache, &td->start, sizeof(td->start));
 
-		if (td->o.ratemin[DDIR_READ] || td->o.ratemin[DDIR_WRITE] ||
-				td->o.ratemin[DDIR_TRIM]) {
+		if (o->ratemin[DDIR_READ] || o->ratemin[DDIR_WRITE] ||
+				o->ratemin[DDIR_TRIM]) {
 		        memcpy(&td->lastrate[DDIR_READ], &td->bw_sample_time,
 						sizeof(td->bw_sample_time));
 		        memcpy(&td->lastrate[DDIR_WRITE], &td->bw_sample_time,
@@ -1292,7 +1370,10 @@ static void *thread_main(void *data)
 
 		prune_io_piece_log(td);
 
-		verify_bytes = do_io(td);
+		if (td->o.verify_only && (td_write(td) || td_rw(td)))
+			verify_bytes = do_dry_run(td);
+		else
+			verify_bytes = do_io(td);
 
 		clear_state = 1;
 
@@ -1312,8 +1393,8 @@ static void *thread_main(void *data)
 		if (td->error || td->terminate)
 			break;
 
-		if (!td->o.do_verify ||
-		    td->o.verify == VERIFY_NONE ||
+		if (!o->do_verify ||
+		    o->verify == VERIFY_NONE ||
 		    (td->io_ops->flags & FIO_UNIDIR))
 			continue;
 
@@ -1342,44 +1423,44 @@ static void *thread_main(void *data)
 
 	fio_mutex_down(writeout_mutex);
 	if (td->bw_log) {
-		if (td->o.bw_log_file) {
+		if (o->bw_log_file) {
 			finish_log_named(td, td->bw_log,
-						td->o.bw_log_file, "bw");
+						o->bw_log_file, "bw");
 		} else
 			finish_log(td, td->bw_log, "bw");
 	}
 	if (td->lat_log) {
-		if (td->o.lat_log_file) {
+		if (o->lat_log_file) {
 			finish_log_named(td, td->lat_log,
-						td->o.lat_log_file, "lat");
+						o->lat_log_file, "lat");
 		} else
 			finish_log(td, td->lat_log, "lat");
 	}
 	if (td->slat_log) {
-		if (td->o.lat_log_file) {
+		if (o->lat_log_file) {
 			finish_log_named(td, td->slat_log,
-						td->o.lat_log_file, "slat");
+						o->lat_log_file, "slat");
 		} else
 			finish_log(td, td->slat_log, "slat");
 	}
 	if (td->clat_log) {
-		if (td->o.lat_log_file) {
+		if (o->lat_log_file) {
 			finish_log_named(td, td->clat_log,
-						td->o.lat_log_file, "clat");
+						o->lat_log_file, "clat");
 		} else
 			finish_log(td, td->clat_log, "clat");
 	}
 	if (td->iops_log) {
-		if (td->o.iops_log_file) {
+		if (o->iops_log_file) {
 			finish_log_named(td, td->iops_log,
-						td->o.iops_log_file, "iops");
+						o->iops_log_file, "iops");
 		} else
 			finish_log(td, td->iops_log, "iops");
 	}
 
 	fio_mutex_up(writeout_mutex);
-	if (td->o.exec_postrun)
-		exec_string(td->o.exec_postrun);
+	if (o->exec_postrun)
+		exec_string(o, o->exec_postrun, (const char *)"postrun");
 
 	if (exitall_on_terminate)
 		fio_terminate_threads(td->groupid);
@@ -1389,7 +1470,7 @@ err:
 		log_info("fio: pid=%d, err=%d/%s\n", (int) td->pid, td->error,
 							td->verror);
 
-	if (td->o.verify_async)
+	if (o->verify_async)
 		verify_async_exit(td);
 
 	close_and_free_files(td);
@@ -1406,7 +1487,7 @@ err:
 	/*
 	 * do this very late, it will log file closing as well
 	 */
-	if (td->o.write_iolog_file)
+	if (o->write_iolog_file)
 		write_iolog_close(td);
 
 	fio_mutex_remove(td->rusage_sem);
@@ -1540,12 +1621,19 @@ reaped:
 			exit_value++;
 
 		done_secs += mtime_since_now(&td->epoch) / 1000;
+		profile_td_exit(td);
 	}
 
 	if (*nr_running == cputhreads && !pending && realthreads)
 		fio_terminate_threads(TERMINATE_ALL);
 }
 
+static void do_usleep(unsigned int usecs)
+{
+	check_for_running_stats();
+	usleep(usecs);
+}
+
 /*
  * Main function for kicking off and reaping jobs, as needed.
  */
@@ -1557,7 +1645,7 @@ static void run_threads(void)
 
 	if (fio_gtod_offload && fio_start_gtod_thread())
 		return;
-	
+
 	fio_idle_prof_init();
 
 	set_sig_handlers();
@@ -1724,7 +1812,7 @@ static void run_threads(void)
 			if (mtime_since_now(&this_start) > JOB_START_TIMEOUT)
 				break;
 
-			usleep(100000);
+			do_usleep(100000);
 
 			for (i = 0; i < this_jobs; i++) {
 				td = map[i];
@@ -1776,12 +1864,12 @@ static void run_threads(void)
 		reap_threads(&nr_running, &t_rate, &m_rate);
 
 		if (todo)
-			usleep(100000);
+			do_usleep(100000);
 	}
 
 	while (nr_running) {
 		reap_threads(&nr_running, &t_rate, &m_rate);
-		usleep(10000);
+		do_usleep(10000);
 	}
 
 	fio_idle_prof_stop();
@@ -1877,6 +1965,7 @@ int fio_backend(void)
 		return 1;
 
 	set_genesis_time();
+	stat_init();
 	create_disk_util_thread();
 
 	cgroup_list = smalloc(sizeof(*cgroup_list));
@@ -1906,5 +1995,6 @@ int fio_backend(void)
 	fio_mutex_remove(startup_mutex);
 	fio_mutex_remove(writeout_mutex);
 	fio_mutex_remove(disk_thread_mutex);
+	stat_exit();
 	return exit_value;
 }