X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=README;h=0eac41fe9da051a5979cc43adb77532003bb43dd;hp=0f91c66ff6430123032cf890f9bed826401ea4b3;hb=afcf77584a39461d81ff8b5c3c86fb7583172020;hpb=47f6bdecbb82f00c698263e0e96b33977c1adb64 diff --git a/README b/README index 0f91c66f..0eac41fe 100644 --- a/README +++ b/README @@ -16,7 +16,10 @@ fio resides in a git repo, the canonical place is: git://git.kernel.dk/fio.git -The http protocol also works, path is the same. +If you are inside a corporate firewall, git:// may not always work for +you. In that case you can use the http protocol, path is the same: + +http://git.kernel.dk/fio.git Snapshots are frequently generated and they include the git meta data as well. You can download them here: @@ -54,6 +57,10 @@ Packages for Solaris are available from OpenCSW. Install their pkgutil tool (http://www.opencsw.org/get-it/pkgutil/) and then install fio via 'pkgutil -i fio'. +Windows: +Bruce Cran has fio packages for Windows at +http://www.bluestop.org/fio . + Mailing list ------------ @@ -79,18 +86,11 @@ http://maillist.kernel.dk/fio-devel/ Building -------- -Just type 'make' and 'make install'. If on FreeBSD, for now you have to -specify the FreeBSD Makefile with -f and use gmake (not make), eg: - -$ gmake -f Makefile.Freebsd && gmake -f Makefile.FreeBSD install - -Same goes for AIX: - -$ gmake -f Makefile.aix && gmake -f Makefile.aix install +Just type 'make' and 'make install'. -Likewise with OpenSolaris, use the Makefile.solaris to compile there. -The OpenSolaris make should work fine. This might change in the -future if I opt for an autoconf type setup. +Note that GNU make is required. On BSD it's available from devel/gmake; +on Solaris it's in the SUNWgmake package. On platforms where GNU make +isn't the default, type 'gmake' instead of 'make'. If your compile fails with an error like this: @@ -106,25 +106,50 @@ Check that you have the libaio development package installed. On RPM based distros, it's typically called libaio-devel. +Windows +------- + +On Windows Cygwin (http://www.cygwin.com) is required with at least +devel/gcc4 and devel/make installed in order to build fio, and +admin/cygrunsrv to run it. You can also install devel/git to fetch/update +the source files. To create an MSI installer package put a copy of Cygwin +in os\windows\fio, install WiX 3.6 from http://wix.sourceforge.net/releases/ +and run dobuild.cmd from the os/windows directory. + +Before running fio you'll need to have a copy of cygserver running. Run +"/usr/bin/cygserver-config" from an elevated Cygwin shell (i.e. launch the +Cygwin shell under the Administrator account) to configure it. Once +configured, run "net start cygserver" to start it, or type +"/usr/sbin/cygserver &" in the Cygwin shell to start a local copy. + +If fio exits with the message "Bad system call" it normally means that +Cygserver isn't running. + + Command line ------------ $ fio - --debug Enable some debugging options (see below) - --output Write output to file - --timeout Runtime in seconds - --latency-log Generate per-job latency logs - --bandwidth-log Generate per-job bandwidth logs - --minimal Minimal (terse) output - --version Print version info and exit - --help Print this page + --debug Enable some debugging options (see below) + --output Write output to file + --timeout Runtime in seconds + --latency-log Generate per-job latency logs + --bandwidth-log Generate per-job bandwidth logs + --minimal Minimal (terse) output + --version Print version info and exit + --terse-version=type Terse version output format + --help Print this page --cmdhelp=cmd Print command help, "all" for all of them - --showcmd Turn a job file into command line options - --readonly Turn on safety read-only checks, preventing writes - --eta=when When ETA estimate should be printed - May be "always", "never" or "auto" - --section=name Only run specified section in job file + --showcmd Turn a job file into command line options + --readonly Turn on safety read-only checks, preventing + writes + --eta=when When ETA estimate should be printed + May be "always", "never" or "auto" + --section=name Only run specified section in job file. Multiple + sections can be specified. --alloc-size=kb Set smalloc pool to this size in kb (def 1024) + --warnings-fatal Fio parser warnings are fatal + --max-jobs Maximum number of threads/processes to support Any parameters following the options will be assumed to be job files, @@ -132,7 +157,7 @@ unless they match a job file parameter. You can add as many as you want, each job file will be regarded as a separate group and fio will stonewall its execution. -The --readonly switch is an extra safety guard to prevent accidentically +The --readonly switch is an extra safety guard to prevent accidentally turning on a write setting when that is not desired. Fio will only write if rw=write/randwrite/rw/randrw is given, but this extra safety net can be used as an extra precaution. It will also enable a write check in the @@ -143,11 +168,11 @@ options in fio. Currently the options are: process Dump info related to processes file Dump info related to file actions - io Dump info related to IO queuing - mem Dump info related to memory allocations + io Dump info related to IO queuing + mem Dump info related to memory allocations blktrace Dump info related to blktrace setup verify Dump info related to IO verification - all Enable all debug options + all Enable all debug options random Dump info related to random offset generation parse Dump info related to option matching and parsing diskutil Dump info related to disk utilization updates @@ -208,7 +233,8 @@ The job file parameters are: size=x Set file size to x bytes (x string can include k/m/g) ioengine=x 'x' may be: aio/libaio/linuxaio for Linux aio, posixaio for POSIX aio, solarisaio for Solaris - native async IO, sync for regular read/write io, + native async IO, windowsaio for Windows native async IO, + sync for regular read/write io, psync for regular pread/pwrite io, vsync for regular readv/writev (with queuing emulation) mmap for mmap'ed io, syslet-rw for syslet driven read/write, splice for @@ -267,14 +293,13 @@ The job file parameters are: can be used to gauge hard drive speed over the entire platter, without reading everything. Both x/y can include k/m/g suffix. - iolog=x Open and read io pattern from file 'x'. The file must - contain one io action per line in the following format: - rw, offset, length - where with rw=0/1 for read/write, and the offset - and length entries being in bytes. + read_iolog=x Open and read io pattern from file 'x'. The file format + is described in the HOWTO. write_iolog=x Write an iolog to file 'x' in the same format as iolog. The iolog options are exclusive, if both given the - read iolog will be performed. + read iolog will be performed. Specify a separate file + for each job, otherwise the iologs will be interspersed + and the file may be corrupt. write_bw_log Write a bandwidth log. write_lat_log Write a latency log. lockmem=x Lock down x amount of memory on the machine, to @@ -293,10 +318,10 @@ The job file parameters are: Platforms --------- -Fio works on (at least) Linux, Solaris, AIX, OSX, NetBSD, and FreeBSD. Some -features and/or options may only be available on some of the platforms, -typically because those features only apply to that platform (like the -solarisaio engine, or the splice engine on Linux). +Fio works on (at least) Linux, Solaris, AIX, HP-UX, OSX, NetBSD, Windows +and FreeBSD. Some features and/or options may only be available on some of +the platforms, typically because those features only apply to that platform +(like the solarisaio engine, or the splice engine on Linux). Some features are not available on FreeBSD/Solaris even if they could be implemented, I'd be happy to take patches for that. An example of that is