X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=HOWTO;h=de4b0a9932b43f207260a569a5e33349efebc63b;hp=19182019f7020389e6e5e48391e8f2b6f58b5871;hb=9467b77c9ac41f09a93a8a984d21b94c1f7d515e;hpb=313cb206ffc6e50c089314d322ebf1c523f37531 diff --git a/HOWTO b/HOWTO index 19182019..de4b0a99 100644 --- a/HOWTO +++ b/HOWTO @@ -49,7 +49,7 @@ bottom, it contains the following basic parameters: IO engine How do we issue io? We could be memory mapping the file, we could be using regular read/write, we - could be using splice, async io, or even + could be using splice, async io, syslet, or even SG (SCSI generic sg). IO depth If the io engine is async, how large a queuing @@ -108,8 +108,8 @@ to use any ascii name you want, except 'global' which has special meaning. A global section sets defaults for the jobs described in that file. A job may override a global section parameter, and a job file may even have several global sections if so desired. A job is only affected by a global -section residing above it. If the first character in a line is a ';', the -entire line is discarded as a comment. +section residing above it. If the first character in a line is a ';' or a +'#', the entire line is discarded as a comment. So lets look at a really simple job file that define to threads, each randomly reading from a 128MiB file. @@ -179,7 +179,10 @@ siint SI integer. A whole number value, which may contain a postfix bool Boolean. Usually parsed as an integer, however only defined for true and false (1 and 0). irange Integer range with postfix. Allows value range to be given, such - as 1024-4096. Also see siint. + as 1024-4096. A colon may also be used as the seperator, eg + 1k:4k. If the option allows two sets of ranges, they can be + specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see + siint. With the above in mind, here follows the complete list of fio job parameters. @@ -190,13 +193,19 @@ name=str ASCII name of the job. This may be used to override the special purpose of also signaling the start of a new job. +description=str Text description of the job. Doesn't do anything except + dump this text description when this job is run. It's + not parsed. + directory=str Prefix filenames with this directory. Used to places files in a different location than "./". filename=str Fio normally makes up a filename based on the job name, thread number, and file number. If you want to share files between threads in a job or several jobs, specify - a filename for each of them to override the default. + a filename for each of them to override the default. If + the ioengine used is 'net', the filename is the host and + port to connect to in the format of =host:port. rw=str Type of io pattern. Accepted values are: @@ -211,6 +220,9 @@ rw=str Type of io pattern. Accepted values are: For certain types of io the result may still be skewed a bit, since the speed may be different. +randrepeat=bool For random IO workloads, seed the generator in a predictable + way so that results are repeatable across repetitions. + size=siint The total size of file io for this job. This may describe the size of the single file the job uses, or it may be divided between the number of files in the job. If the @@ -258,6 +270,9 @@ ioengine=str Defines how the job issues io to the file. The following vmsplice(2) to transfer data from user space to the kernel. + syslet-rw Use the syslet system calls to make + regular read/write async. + sg SCSI generic sg v3 io. May either be synchronous using the SG_IO ioctl, or if the target is an sg character device @@ -268,13 +283,33 @@ ioengine=str Defines how the job issues io to the file. The following to. This is mainly used to exercise fio itself and for debugging/testing purposes. + net Transfer over the network to given host:port. + 'filename' must be set appropriately to + filename=host:port regardless of send + or receive, if the latter only the port + argument is used. + iodepth=int This defines how many io units to keep in flight against the file. The default is 1 for each file defined in this job, can be overridden with a larger value for higher concurrency. +iodepth_batch=int This defines how many pieces of IO to submit at once. + It defaults to the same as iodepth, but can be set lower + if one so desires. + +iodepth_low=int The low water mark indicating when to start filling + the queue again. Defaults to the same as iodepth, meaning + that fio will attempt to keep the queue full at all times. + If iodepth is set to eg 16 and iodepth_low is set to 4, then + after fio has filled the queue of 16 requests, it will let + the depth drain down to 4 before starting to fill it again. + direct=bool If value is true, use non-buffered io. This is usually - O_DIRECT. Defaults to true. + O_DIRECT. + +buffered=bool If value is true, use buffered io. This is the opposite + of the 'direct' option. Defaults to true. offset=siint Start io at the given offset in the file. The data before the given offset will not be touched. This effectively @@ -319,7 +354,20 @@ prioclass=int Set the io priority class. See man ionice(1). thinktime=int Stall the job x microseconds after an io has completed before issuing the next. May be used to simulate processing being - done by an application. + done by an application. See thinktime_blocks and + thinktime_spin. + +thinktime_spin=int + Only valid if thinktime is set - pretend to spend CPU time + doing something with the data received, before falling back + to sleeping for the rest of the period specified by + thinktime. + +thinktime_blocks + Only valid if thinktime is set - control how many blocks + to issue, before waiting 'thinktime' usecs. If not set, + defaults to 1 which will make fio wait 'thinktime' usecs + after every block. rate=int Cap the bandwidth used by this job to this number of KiB/sec. @@ -338,7 +386,7 @@ startdelay=int Start this job the specified number of seconds after fio jobs, and you want to delay starting some jobs to a certain time. -timeout=int Tell fio to terminate processing after the specified number +runtime=int Tell fio to terminate processing after the specified number of seconds. It can be quite hard to determine for how long a specified job will run, so this parameter is handy to cap the total runtime to a given time. @@ -408,8 +456,9 @@ create_serialize=bool If true, serialize the file creating for the jobs. create_fsync=bool fsync the data file after creation. This is the default. -unlink Unlink the job files when done. fio defaults to doing this, - if it created the file itself. +unlink=bool Unlink the job files when done. Not the default, as repeated + runs of that job would then waste time recreating the fileset + again and again. loops=int Run the specified number of iterations of this job. Used to repeat the same workload a given number of times. Defaults @@ -488,7 +537,7 @@ cpuchunks=int If the job is a CPU cycle eater, split the load into fio spits out a lot of output. While running, fio will display the status of the jobs created. An example of that would be: -Threads running: 1: [_r] [24.79% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s] +Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s] The characters inside the square brackets denote the current status of each thread. The possible values (in typical life cycle order) are: @@ -520,10 +569,13 @@ direction, the output looks like: Client1 (g=0): err= 0: write: io= 32MiB, bw= 666KiB/s, runt= 50320msec - slat (msec): min= 0, max= 136, avg= 0.03, dev= 1.92 - clat (msec): min= 0, max= 631, avg=48.50, dev=86.82 - bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, dev=681.68 + slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92 + clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82 + bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68 cpu : usr=1.49%, sys=0.25%, ctx=7969 + IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0% + lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%, + lat (msec): 250=15.2%, 500=0.0%, 750=0.0%, 1000=0.0%, >=2048=0.0% The client number is printed, along with the group id and error of that thread. Below is the io statistics, here for writes. In the order listed, @@ -548,6 +600,17 @@ runt= The runtime of that thread same disk, since they are then competing for disk access. cpu= CPU usage. User and system time, along with the number of context switches this thread went through. +IO depths= The distribution of io depths over the job life time. The + numbers are divided into powers of 2, so for example the + 16= entries includes depths up to that value but higher + than the previous entry. In other words, it covers the + range from 16 to 31. +IO latencies= The distribution of IO completion latencies. This is the + time from when IO leaves fio and when it gets completed. + The numbers follow the same pattern as the IO depths, + meaning that 2=1.6% means that 1.6% of the IO completed + within 2 msecs, 20=12.8% means that 12.8% of the IO + took more than 10 msecs, but less than (or equal to) 20 msecs. After each client has been listed, the group statistics are printed. They will look like this: