X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=HOWTO;h=35dccfb16855683115e62ff83109fa9b886f5407;hp=55662d34bae7d7cc2ed46a6b87d2a5fa971568ee;hb=ecc314ba7c5f02b7e90ac1dfbce1a74cd4e6d6fe;hpb=e8462bd8250cf3ff2d41f17e1a4d4cefc70b6b37 diff --git a/HOWTO b/HOWTO index 55662d34..35dccfb1 100644 --- a/HOWTO +++ b/HOWTO @@ -112,7 +112,7 @@ section residing above it. If the first character in a line is a ';' or a '#', the entire line is discarded as a comment. So let's look at a really simple job file that defines two processes, each -randomly reading from a 128MiB file. +randomly reading from a 128MB file. ; -- start job file -- [global] @@ -150,14 +150,17 @@ numjobs=4 Here we have no global section, as we only have one job defined anyway. We want to use async io here, with a depth of 4 for each file. We also -increased the buffer size used to 32KiB and define numjobs to 4 to +increased the buffer size used to 32KB and define numjobs to 4 to fork 4 identical jobs. The result is 4 processes each randomly writing -to their own 64MiB file. Instead of using the above job file, you could +to their own 64MB file. Instead of using the above job file, you could have given the parameters on the command line. For this case, you would specify: $ fio --name=random-writers --ioengine=libaio --iodepth=4 --rw=randwrite --bs=32k --direct=0 --size=64m --numjobs=4 +4.1 Environment variables +------------------------- + fio also supports environment variable expansion in job files. Any substring of the form "${VARNAME}" as part of an option value (in other words, on the right of the `='), will be expanded to the value of the @@ -188,6 +191,26 @@ numjobs=4 fio ships with a few example job files, you can also look there for inspiration. +4.2 Reserved keywords +--------------------- + +Additionally, fio has a set of reserved keywords that will be replaced +internally with the appropriate value. Those keywords are: + +$pagesize The architecture page size of the running system +$mb_memory Megabytes of total memory in the system +$ncpus Number of online available CPUs + +These can be used on the command line or in the job file, and will be +automatically substituted with the current system values when the job +is run. Simple math is also supported on these keywords, so you can +perform actions like: + +size=8*$mb_memory + +and get that properly expanded to 8 times the size of memory in the +machine. + 5.0 Detailed list of parameters ------------------------------- @@ -197,21 +220,26 @@ Some parameters take an option of a given type, such as an integer or a string. The following types are used: str String. This is a sequence of alpha characters. -time Integer with possible time postfix. In seconds unless otherwise +time Integer with possible time suffix. In seconds unless otherwise specified, use eg 10m for 10 minutes. Accepts s/m/h for seconds, minutes, and hours. -int SI integer. A whole number value, which may contain a postfix - describing the base of the number. Accepted postfixes are k/m/g, - meaning kilo, mega, and giga. So if you want to specify 4096, - you could either write out '4096' or just give 4k. The postfixes - signify base 2 values, so 1024 is 1k and 1024k is 1m and so on. - If the option accepts an upper and lower range, use a colon ':' - or minus '-' to separate such values. May also include a prefix - to indicate numbers base. If 0x is used, the number is assumed to - be hexadecimal. See irange. +int SI integer. A whole number value, which may contain a suffix + describing the base of the number. Accepted suffixes are k/m/g/t/p, + meaning kilo, mega, giga, tera, and peta. The suffix is not case + sensitive, and you may also include trailing 'b' (eg 'kb' is the same + as 'k'). So if you want to specify 4096, you could either write + out '4096' or just give 4k. The suffixes signify base 2 values, so + 1024 is 1k and 1024k is 1m and so on, unless the suffix is explicitly + set to a base 10 value using 'kib', 'mib', 'gib', etc. If that is the + case, then 1000 is used as the multiplier. This can be handy for + disks, since manufacturers generally use base 10 values when listing + the capacity of a drive. If the option accepts an upper and lower + range, use a colon ':' or minus '-' to separate such values. May also + include a prefix to indicate numbers base. If 0x is used, the number + is assumed to be hexadecimal. See irange. bool Boolean. Usually parsed as an integer, however only defined for true and false (1 and 0). -irange Integer range with postfix. Allows value range to be given, such +irange Integer range with suffix. Allows value range to be given, such as 1024-4096. A colon may also be used as the separator, eg 1k:4k. If the option allows two sets of ranges, they can be specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see @@ -243,9 +271,14 @@ filename=str Fio normally makes up a filename based on the job name, can specify a number of files by separating the names with a ':' colon. So if you wanted a job to open /dev/sda and /dev/sdb as the two working files, you would use - filename=/dev/sda:/dev/sdb. '-' is a reserved name, meaning - stdin or stdout. Which of the two depends on the read/write - direction set. + filename=/dev/sda:/dev/sdb. On Windows, disk devices are accessed + as \\.\PhysicalDrive0 for the first device, \\.\PhysicalDrive1 + for the second etc. If the wanted filename does need to + include a colon, then escape that with a '\' character. + For instance, if the filename is "/dev/dsk/foo@3,0:c", + then you would use filename="/dev/dsk/foo@3,0\:c". + '-' is a reserved name, meaning stdin or stdout. Which of the + two depends on the read/write direction set. opendir=str Tell fio to recursively add any file it can find in this directory and down the file system tree. @@ -282,17 +315,44 @@ rw=str Type of io pattern. Accepted values are: For the mixed io types, the default is to split them 50/50. For certain types of io the result may still be skewed a bit, since the speed may be different. It is possible to specify - a number of IO's to do before getting a new offset - this - is only useful for random IO, where fio would normally - generate a new random offset for every IO. If you append - eg 8 to randread, you would get a new random offset for + a number of IO's to do before getting a new offset, this is + one by appending a ':' to the end of the string given. + For a random read, it would look like 'rw=randread:8' for + passing in an offset modifier with a value of 8. See the + 'rw_sequencer' option. + +rw_sequencer=str If an offset modifier is given by appending a number to + the rw= line, then this option controls how that + number modifies the IO offset being generated. Accepted + values are: + + sequential Generate sequential offset + identical Generate the same offset + + 'sequential' is only useful for random IO, where fio would + normally generate a new random offset for every IO. If you + append eg 8 to randread, you would get a new random offset for every 8 IO's. The result would be a seek for only every 8 IO's, instead of for every IO. Use rw=randread:8 to specify - that. + that. As sequential IO is already sequential, setting + 'sequential' for that would not result in any differences. + 'identical' behaves in a similar fashion, except it sends + the same offset 8 number of times before generating a new + offset. + +kb_base=int The base unit for a kilobyte. The defacto base is 2^10, 1024. + Storage manufacturers like to use 10^3 or 1000 as a base + ten unit instead, for obvious reasons. Allow values are + 1024 or 1000, with 1024 being the default. randrepeat=bool For random IO workloads, seed the generator in a predictable way so that results are repeatable across repetitions. +fallocate=bool By default, fio will use fallocate() to advise the system + of the size of the file we are going to write. This can be + turned off with fallocate=0. May not be available on all + supported platforms. + fadvise_hint=bool By default, fio will use fadvise() to advise the kernel on what IO patterns it is likely to issue. Sometimes you want to test specific IO patterns without telling the @@ -305,7 +365,9 @@ size=int The total size of file io for this job. Fio will run until limited by other options (such as 'runtime', for instance). Unless specific nrfiles and filesize options are given, fio will divide this size between the available files - specified by the job. + specified by the job. If not set, fio will use the full + size of the given files or devices. If the the files + do not exist, size must be given. filesize=int Individual file sizes. May be a range, in which case fio will select sizes for files at random within the given range @@ -432,6 +494,8 @@ ioengine=str Defines how the job issues io to the file. The following solarisaio Solaris native asynchronous io. + windowsaio Windows native asynchronous io. + mmap File is memory mapped and data copied to/from using memcpy(3). @@ -489,7 +553,14 @@ ioengine=str Defines how the job issues io to the file. The following iodepth=int This defines how many io units to keep in flight against the file. The default is 1 for each file defined in this job, can be overridden with a larger value for higher - concurrency. + concurrency. Note that increasing iodepth beyond 1 will not + affect synchronous ioengines (except for small degress when + verify_async is in use). Even async engines my impose OS + restrictions causing the desired depth not to be achieved. + This may happen on Linux when using libaio and not setting + direct=1, since buffered IO is not async on that OS. Keep an + eye on the IO depth distribution in the fio output to verify + that the achieved depth is as expected. Default: 1. iodepth_batch_submit=int iodepth_batch=int This defines how many pieces of IO to submit at once. @@ -530,8 +601,24 @@ fsync=int If writing to a file, issue a sync of the dirty data not sync the file. The exception is the sg io engine, which synchronizes the disk cache anyway. -fsyncdata=int Like fsync= but uses fdatasync() to only sync data and not +fdatasync=int Like fsync= but uses fdatasync() to only sync data and not metadata blocks. + In FreeBSD there is no fdatasync(), this falls back to + using fsync() + +sync_file_range=str:val Use sync_file_range() for every 'val' number of + write operations. Fio will track range of writes that + have happened since the last sync_file_range() call. 'str' + can currently be one or more of: + + wait_before SYNC_FILE_RANGE_WAIT_BEFORE + write SYNC_FILE_RANGE_WRITE + wait_after SYNC_FILE_RANGE_WAIT_AFTER + + So if you do sync_file_range=wait_before,write:8, fio would + use SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE for + every 8 writes. Also see the sync_file_range(2) man page. + This option is Linux specific. overwrite=bool If true, writes to a file will always overwrite existing data. If the file doesn't already exist, it will be @@ -595,7 +682,7 @@ thinktime_blocks after every block. rate=int Cap the bandwidth used by this job. The number is in bytes/sec, - the normal postfix rules apply. You can use rate=500k to limit + the normal suffix rules apply. You can use rate=500k to limit reads and writes to 500k each, or you can specify read and writes separately. Using rate=1m,500k would limit reads to 1MB/sec and writes to 500KB/sec. Capping only reads or @@ -691,7 +778,7 @@ mem=str Fio can use various types of memory as the io unit buffer. that for shmhuge and mmaphuge to work, the system must have free huge pages allocated. This can normally be checked and set by reading/writing /proc/sys/vm/nr_hugepages on a - Linux system. Fio assumes a huge page is 4MiB in size. So + Linux system. Fio assumes a huge page is 4MB in size. So to calculate the number of huge pages you need for a given job file, add up the io depth of all jobs (normally one unless iodepth= is used) and multiply by the maximum bs set. Then @@ -715,7 +802,7 @@ iomem_align=int This indiciates the memory alignment of the IO memory buffers. hugepage-size=int Defines the size of a huge page. Must at least be equal - to the system setting, see /proc/meminfo. Defaults to 4MiB. + to the system setting, see /proc/meminfo. Defaults to 4MB. Should probably always be a multiple of megabytes, so using hugepage-size=Xm is the preferred way to set this to avoid setting a non-pow-2 bad value. @@ -771,7 +858,9 @@ verify=str If writing to a file, fio can verify the file contents it in the header of each block. crc32c-intel Use hardware assisted crc32c calcuation - provided on SSE4.2 enabled processors. + provided on SSE4.2 enabled processors. Falls + back to regular software crc32c, if not + supported by the system. crc32 Use a crc32 sum of the data area and store it in the header of each block. @@ -786,9 +875,11 @@ verify=str If writing to a file, fio can verify the file contents sha256 Use sha256 as the checksum function. + sha1 Use optimized sha1 as the checksum function. + meta Write extra information about each io (timestamp, block number etc.). The block - number is verified. + number is verified. See also verify_pattern. null Only pretend to verify. Useful for testing internals with ioengine=null, not for much @@ -796,7 +887,11 @@ verify=str If writing to a file, fio can verify the file contents This option can be used for repeated burn-in tests of a system to make sure that the written data is also - correctly read back. + correctly read back. If the data direction given is + a read or random read, fio will assume that it should + verify a previously written file. If the data direction + includes any form of write, the verify will be of the + newly written data. verifysort=bool If set, fio will sort written verify blocks when it deems it faster to read them back in a sorted manner. This is @@ -815,13 +910,15 @@ verify_interval=int Write the verification header at a finer granularity size of header_interval. blocksize should divide this evenly. -verify_pattern=int If set, fio will fill the io buffers with this +verify_pattern=str If set, fio will fill the io buffers with this pattern. Fio defaults to filling with totally random bytes, but sometimes it's interesting to fill with a known pattern for io verification purposes. Depending on the width of the pattern, fio will fill 1/2/3/4 bytes of the - buffer at the time. The verify_pattern cannot be larger than - a 32-bit quantity. + buffer at the time(it can be either a decimal or a hex number). + The verify_pattern if larger than a 32-bit quantity has to + be a hex number that starts with either "0x" or "0X". Use + with verify=meta. verify_fatal=bool Normally fio will keep checking the entire contents before quitting on a block verification failure. If this @@ -832,11 +929,35 @@ verify_async=int Fio will normally verify IO inline from the submitting thread. This option takes an integer describing how many async offload threads to create for IO verification instead, causing fio to offload the duty of verifying IO contents - to one or more separate threads. + to one or more separate threads. If using this offload + option, even sync IO engines can benefit from using an + iodepth setting higher than 1, as it allows them to have + IO in flight while verifies are running. verify_async_cpus=str Tell fio to set the given CPU affinity on the async IO verification threads. See cpus_allowed for the format used. + +verify_backlog=int Fio will normally verify the written contents of a + job that utilizes verify once that job has completed. In + other words, everything is written then everything is read + back and verified. You may want to verify continually + instead for a variety of reasons. Fio stores the meta data + associated with an IO block in memory, so for large + verify workloads, quite a bit of memory would be used up + holding this meta data. If this option is enabled, fio + will write only N blocks before verifying these blocks. + + will verify the previously written blocks before continuing + to write new ones. + +verify_backlog_batch=int Control how many blocks fio will verify + if verify_backlog is set. If not set, will default to + the value of verify_backlog (meaning the entire queue + is read back and verified). If verify_backlog_batch is + less than verify_backlog then not all blocks will be verified, + if verify_backlog_batch is larger than verify_backlog, some + blocks will be verified more than once. stonewall Wait for preceeding jobs in the job file to exit, before starting this one. Can be used to insert serialization @@ -880,7 +1001,32 @@ read_iolog=str Open an iolog with the specified file name and replay the to replay a workload captured by blktrace. See blktrace for how to capture such logging data. For blktrace replay, the file needs to be turned into a blkparse binary data - file first (blktrace -d file_for_fio.bin). + file first (blkparse -o /dev/null -d file_for_fio.bin). + +replay_no_stall=int When replaying I/O with read_iolog the default behavior + is to attempt to respect the time stamps within the log and + replay them with the appropriate delay between IOPS. By + setting this variable fio will not respect the timestamps and + attempt to replay them as fast as possible while still + respecting ordering. The result is the same I/O pattern to a + given device, but different timings. + +replay_redirect=str While replaying I/O patterns using read_iolog the + default behavior is to replay the IOPS onto the major/minor + device that each IOP was recorded from. This is sometimes + undesireable because on a different machine those major/minor + numbers can map to a different device. Changing hardware on + the same system can also result in a different major/minor + mapping. Replay_redirect causes all IOPS to be replayed onto + the single specified device regardless of the device it was + recorded from. i.e. replay_redirect=/dev/sdc would cause all + IO in the blktrace to be replayed onto /dev/sdc. This means + multiple devices will be replayed onto a single, if the trace + contains multiple devices. If you want multiple devices to be + replayed concurrently to multiple redirected devices you must + blkparse your trace into separate traces and replay them with + independent fio invocations. Unfortuantely this also breaks + the strict time ordering between multiple device accesses. write_bw_log=str If given, write a bandwidth log of the jobs in this job file. Can be used to store data of the bandwidth of the @@ -890,15 +1036,16 @@ write_bw_log=str If given, write a bandwidth log of the jobs in this job filename. For this option, the postfix is _bw.log. write_lat_log=str Same as write_bw_log, except that this option stores io - completion latencies instead. If no filename is given - with this option, the default filename of "jobname_type.log" - is used. Even if the filename is given, fio will still - append the type of log. So if one specifies + submission, completion, and total latencies instead. If no + filename is given with this option, the default filename of + "jobname_type.log" is used. Even if the filename is given, + fio will still append the type of log. So if one specifies write_lat_log=foo - The actual log names will be foo_clat.log and foo_slat.log. - This helps fio_generate_plot fine the logs automatically. + The actual log names will be foo_slat.log, foo_slat.log, + and foo_lat.log. This helps fio_generate_plot fine the logs + automatically. lockmem=int Pin down the specified amount of memory with mlock(2). Can potentially be used instead of removing memory or booting @@ -922,18 +1069,21 @@ cpuchunks=int If the job is a CPU cycle eater, split the load into disk_util=bool Generate disk utilization statistics, if the platform supports it. Defaults to on. -disable_clat=bool Disable measurements of completion latency numbers. Useful +disable_lat=bool Disable measurements of total latency numbers. Useful only for cutting back the number of calls to gettimeofday, as that does impact performance at really high IOPS rates. Note that to really get rid of a large amount of these calls, this option must be used with disable_slat and disable_bw as well. +disable_clat=bool Disable measurements of completion latency numbers. See + disable_lat. + disable_slat=bool Disable measurements of submission latency numbers. See - disable_clat. + disable_slat. disable_bw=bool Disable measurements of throughput/bandwidth numbers. See - disable_clat. + disable_lat. gtod_reduce=bool Enable all of the gettimeofday() reducing options (disable_clat, disable_slat, disable_bw) plus reduce @@ -953,6 +1103,7 @@ gtod_cpu=int Sometimes it's cheaper to dedicate a single thread of for doing these time calls will be excluded from other uses. Fio will manually clear it from the CPU mask of other jobs. + continue_on_error=bool Normally fio will exit the job on the first observed failure. If this option is set, fio will continue the job when there is a 'non-fatal error' (EIO or EILSEQ) until the runtime @@ -962,6 +1113,27 @@ continue_on_error=bool Normally fio will exit the job on the first observed given in the stats is the first error that was hit during the run. +cgroup=str Add job to this control group. If it doesn't exist, it will + be created. The system must have a mounted cgroup blkio + mount point for this to work. If your system doesn't have it + mounted, you can do so with: + + # mount -t cgroup -o blkio none /cgroup + +cgroup_weight=int Set the weight of the cgroup to this value. See + the documentation that comes with the kernel, allowed values + are in the range of 100..1000. + +cgroup_nodelete=bool Normally fio will delete the cgroups it has created after + the job completion. To override this behavior and to leave + cgroups around after the job completion, set cgroup_nodelete=1. + This can be useful if one wants to inspect various cgroup + files after job completion. Default: false + +uid=int Instead of running as the invoking user, set the user ID to + this value before the thread/process does any work. + +gid=int Set group ID, see uid. 6.0 Interpreting the output --------------------------- @@ -1002,10 +1174,10 @@ each thread, group of threads, and disks in that order. For each data direction, the output looks like: Client1 (g=0): err= 0: - write: io= 32MiB, bw= 666KiB/s, runt= 50320msec + write: io= 32MB, bw= 666KB/s, runt= 50320msec slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92 clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82 - bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68 + bw (KB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68 cpu : usr=1.49%, sys=0.25%, ctx=7969, majf=0, minf=17 IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% @@ -1065,8 +1237,8 @@ After each client has been listed, the group statistics are printed. They will look like this: Run status group 0 (all jobs): - READ: io=64MiB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec - WRITE: io=64MiB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec + READ: io=64MB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec + WRITE: io=64MB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec For each data direction, it prints: @@ -1100,26 +1272,35 @@ For scripted usage where you typically want to generate tables or graphs of the results, fio can output the results in a semicolon separated format. The format is one long line of values, such as: -client1;0;0;1906777;1090804;1790;0;0;0.000000;0.000000;0;0;0.000000;0.000000;929380;1152890;25.510151%;1078276.333333;128948.113404;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;100.000000%;0.000000%;324;100.0%;0.0%;0.0%;0.0%;0.0%;0.0%;0.0%;100.0%;0.0%;0.0%;0.0%;0.0%;0.0% -;0.0%;0.0%;0.0%;0.0%;0.0% +2;card0;0;0;7139336;121836;60004;1;10109;27.932460;116.933948;220;126861;3495.446807;1085.368601;226;126864;3523.635629;1089.012448;24063;99944;50.275485%;59818.274627;5540.657370;7155060;122104;60004;1;8338;29.086342;117.839068;388;128077;5032.488518;1234.785715;391;128085;5061.839412;1236.909129;23436;100928;50.287926%;59964.832030;5644.844189;14.595833%;19.394167%;123706;0;7313;0.1%;0.1%;0.1%;0.1%;0.1%;0.1%;100.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.02%;0.05%;0.16%;6.04%;40.40%;52.68%;0.64%;0.01%;0.00%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00% +A description of this job goes here. -To enable terse output, use the --minimal command line option. +The job description (if provided) follows on a second line. + +To enable terse output, use the --minimal command line option. The first +value is the version of the terse output format. If the output has to +be changed for some reason, this number will be incremented by 1 to +signify that change. Split up, the format is as follows: - jobname, groupid, error + version, jobname, groupid, error READ status: - KiB IO, bandwidth (KiB/sec), runtime (msec) + KB IO, bandwidth (KB/sec), runtime (msec) Submission latency: min, max, mean, deviation Completion latency: min, max, mean, deviation + Total latency: min, max, mean, deviation Bw: min, max, aggregate percentage of total, mean, deviation WRITE status: - KiB IO, bandwidth (KiB/sec), runtime (msec) + KB IO, bandwidth (KB/sec), runtime (msec) Submission latency: min, max, mean, deviation Completion latency: min, max, mean, deviation + Total latency: min, max, mean, deviation Bw: min, max, aggregate percentage of total, mean, deviation CPU usage: user, system, context switches, major faults, minor faults IO depths: <=1, 2, 4, 8, 16, 32, >=64 - IO latencies: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, >=2000 - Text description - + IO latencies microseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000 + IO latencies milliseconds: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, 2000, >=2000 + Additional Info (dependant on continue_on_error, default off): total # errors, first error code + + Additional Info (dependant on description being set): Text description