X-Git-Url: https://git.kernel.dk/?p=fio.git;a=blobdiff_plain;f=HOWTO;h=2e4cdbdf146e17394a8ebcd481097e43846131ba;hp=ee899b8fdb6c402814086dde41f986d152c456c9;hb=bebe639808147d587bbe776566d390b9ff98773f;hpb=a596f047e2b3d447ccca76bd075f05473a1f8d1c diff --git a/HOWTO b/HOWTO index ee899b8f..2e4cdbdf 100644 --- a/HOWTO +++ b/HOWTO @@ -8,7 +8,7 @@ Table of contents 5. Detailed list of parameters 6. Normal output 7. Terse output - +8. Trace file format 1.0 Overview and history ------------------------ @@ -244,6 +244,7 @@ irange Integer range with suffix. Allows value range to be given, such 1k:4k. If the option allows two sets of ranges, they can be specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see int. +float_list A list of floating numbers, separated by a ':' character. With the above in mind, here follows the complete list of fio job parameters. @@ -266,7 +267,7 @@ filename=str Fio normally makes up a filename based on the job name, files between threads in a job or several jobs, specify a filename for each of them to override the default. If the ioengine used is 'net', the filename is the host, port, - and protocol to use in the format of =host/port/protocol. + and protocol to use in the format of =host,port,protocol. See ioengine=net for more. If the ioengine is file based, you can specify a number of files by separating the names with a ':' colon. So if you wanted a job to open /dev/sda and /dev/sdb @@ -318,8 +319,12 @@ rw=str Type of io pattern. Accepted values are: a number of IO's to do before getting a new offset, this is one by appending a ':' to the end of the string given. For a random read, it would look like 'rw=randread:8' for - passing in an offset modifier with a value of 8. See the - 'rw_sequencer' option. + passing in an offset modifier with a value of 8. If the + postfix is used with a sequential IO pattern, then the value + specified will be added to the generated offset for each IO. + For instance, using rw=write:4k will skip 4k for every + write. It turns sequential IO into sequential IO with holes. + See the 'rw_sequencer' option. rw_sequencer=str If an offset modifier is given by appending a number to the rw= line, then this option controls how that @@ -382,7 +387,10 @@ size=int The total size of file io for this job. Fio will run until fio will divide this size between the available files specified by the job. If not set, fio will use the full size of the given files or devices. If the the files - do not exist, size must be given. + do not exist, size must be given. It is also possible to + give size as a percentage between 1 and 100. If size=20% + is given, fio will use 20% of the full size of the given + files or devices. filesize=int Individual file sizes. May be a range, in which case fio will select sizes for files at random within the given range @@ -473,6 +481,13 @@ refill_buffers If this option is given, fio will refill the IO buffers isn't specified, naturally. If data verification is enabled, refill_buffers is also automatically enabled. +scramble_buffers=bool If refill_buffers is too costly and the target is + using data deduplication, then setting this option will + slightly modify the IO buffer contents to defeat normal + de-dupe attempts. This is not enough to defeat more clever + block compression attempts, but it will stop naive dedupe of + blocks. Default: true. + nrfiles=int Number of files to use for this job. Defaults to 1. openfiles=int Number of files to keep open at the same time. Defaults to @@ -509,6 +524,16 @@ ioengine=str Defines how the job issues io to the file. The following libaio Linux native asynchronous io. Note that Linux may only support queued behaviour with non-buffered IO (set direct=1 or buffered=0). + This engine also has a sub-option, + userspace_reap. To set it, use + ioengine=libaio:userspace_reap. Normally, with + the libaio engine in use, fio will use the + io_getevents system call to reap newly returned + events. With this flag turned on, the AIO ring + will be read directly from user-space to reap + events. The reaping mode is only enabled when + polling for a minimum of 0 events (eg when + iodepth_batch_complete=0). posixaio glibc posix asynchronous io. @@ -565,6 +590,11 @@ ioengine=str Defines how the job issues io to the file. The following for more info on GUASI. + rdma The RDMA I/O engine supports both RDMA + memory semantics (RDMA_WRITE/RDMA_READ) and + channel semantics (Send/Recv) for the + InfiniBand, RoCE and iWARP protocols. + external Prefix to specify loading an external IO engine object file. Append the engine filename, eg ioengine=external:/tmp/foo.o @@ -670,10 +700,10 @@ norandommap Normally fio will cover every block of the file when doing blocksizes (via bsrange=) are used, since fio only tracks complete rewrites of blocks. -softrandommap See norandommap. If fio runs with the random block map enabled - and it fails to allocate the map, if this option is set it - will continue without a random block map. As coverage will - not be as complete as with random maps, this option is +softrandommap=bool See norandommap. If fio runs with the random block map + enabled and it fails to allocate the map, if this option is + set it will continue without a random block map. As coverage + will not be as complete as with random maps, this option is disabled by default. nice=int Run the job with the given nice value. See man nice(2). @@ -834,6 +864,9 @@ exitall When one job finishes, terminate the rest. The default is bwavgtime=int Average the calculated bandwidth over the given time. Value is specified in milliseconds. +iopsavgtime=int Average the calculated IOPS over the given time. Value + is specified in milliseconds. + create_serialize=bool If true, serialize the file creating for the jobs. This may be handy to avoid interleaving of data files, which may greatly depend on the filesystem @@ -984,7 +1017,8 @@ verify_backlog_batch=int Control how many blocks fio will verify if verify_backlog_batch is larger than verify_backlog, some blocks will be verified more than once. -stonewall Wait for preceeding jobs in the job file to exit, before +stonewall +wait_for_previous Wait for preceeding jobs in the job file to exit, before starting this one. Can be used to insert serialization points in the job file. A stone wall also implies starting a new reporting group. @@ -1073,6 +1107,9 @@ write_lat_log=str Same as write_bw_log, except that this option stores io and foo_lat.log. This helps fio_generate_plot fine the logs automatically. +write_bw_log=str If given, write an IOPS log of the jobs in this job + file. See write_bw_log. + lockmem=int Pin down the specified amount of memory with mlock(2). Can potentially be used instead of removing memory or booting with less memory to simulate a smaller amount of memory. @@ -1111,6 +1148,18 @@ disable_slat=bool Disable measurements of submission latency numbers. See disable_bw=bool Disable measurements of throughput/bandwidth numbers. See disable_lat. +clat_percentiles=bool Enable the reporting of percentiles of + completion latencies. + +percentile_list=float_list Overwrite the default list of percentiles + for completion latencies. Each number is a floating + number in the range (0,100], and the maximum length of + the list is 20. Use ':' to separate the numbers, and + list the numbers in ascending order. For example, + --percentile_list=99.5:99.9 will cause fio to report + the values of completion latency below which 99.5% and + 99.9% of the observed latencies fell, respectively. + gtod_reduce=bool Enable all of the gettimeofday() reducing options (disable_clat, disable_slat, disable_bw) plus reduce precision of the timeout somewhat to really shrink @@ -1200,7 +1249,7 @@ each thread, group of threads, and disks in that order. For each data direction, the output looks like: Client1 (g=0): err= 0: - write: io= 32MB, bw= 666KB/s, runt= 50320msec + write: io= 32MB, bw= 666KB/s, iops=89 , runt= 50320msec slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92 clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82 bw (KB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68 @@ -1218,6 +1267,7 @@ they denote: io= Number of megabytes io performed bw= Average bandwidth rate +iops= Average IOs performed per second runt= The runtime of that thread slat= Submission latency (avg being the average, stdev being the standard deviation). This is the time it took to submit @@ -1312,13 +1362,13 @@ Split up, the format is as follows: version, jobname, groupid, error READ status: - KB IO, bandwidth (KB/sec), runtime (msec) + Total IO (KB), bandwidth (KB/sec), runtime (msec) Submission latency: min, max, mean, deviation Completion latency: min, max, mean, deviation Total latency: min, max, mean, deviation Bw: min, max, aggregate percentage of total, mean, deviation WRITE status: - KB IO, bandwidth (KB/sec), runtime (msec) + Total IO (KB), bandwidth (KB/sec), runtime (msec) Submission latency: min, max, mean, deviation Completion latency: min, max, mean, deviation Total latency: min, max, mean, deviation @@ -1330,3 +1380,64 @@ Split up, the format is as follows: Additional Info (dependant on continue_on_error, default off): total # errors, first error code Additional Info (dependant on description being set): Text description + + +8.0 Trace file format +--------------------- +There are two trace file format that you can encounter. The older (v1) format +is unsupported since version 1.20-rc3 (March 2008). It will still be described +below in case that you get an old trace and want to understand it. + +In any case the trace is a simple text file with a single action per line. + + +8.1 Trace file format v1 +------------------------ +Each line represents a single io action in the following format: + +rw, offset, length + +where rw=0/1 for read/write, and the offset and length entries being in bytes. + +This format is not supported in Fio versions => 1.20-rc3. + + +8.2 Trace file format v2 +------------------------ +The second version of the trace file format was added in Fio version 1.17. +It allows to access more then one file per trace and has a bigger set of +possible file actions. + +The first line of the trace file has to be: + +fio version 2 iolog + +Following this can be lines in two different formats, which are described below. + +The file management format: + +filename action + +The filename is given as an absolute path. The action can be one of these: + +add Add the given filename to the trace +open Open the file with the given filename. The filename has to have + been added with the add action before. +close Close the file with the given filename. The file has to have been + opened before. + + +The file io action format: + +filename action offset length + +The filename is given as an absolute path, and has to have been added and opened +before it can be used with this format. The offset and length are given in +bytes. The action can be one of these: + +wait Wait for 'offset' microseconds. Everything below 100 is discarded. +read Read 'length' bytes beginning from 'offset' +write Write 'length' bytes beginning from 'offset' +sync fsync() the file +datasync fdatasync() the file +trim trim the given file from the given 'offset' for 'length' bytes