.TP
.B pmemblk
Read and write using filesystem DAX to a file on a filesystem
-mounted with DAX on a persistent memory device through the NVML
+mounted with DAX on a persistent memory device through the PMDK
libpmemblk library.
.TP
.B dev\-dax
Read and write using device DAX to a persistent memory device (e.g.,
-/dev/dax0.0) through the NVML libpmem library.
+/dev/dax0.0) through the PMDK libpmem library.
.TP
.B external
Prefix to specify loading an external I/O engine object file. Append
.TP
.B libpmem
Read and write using mmap I/O to a file on a filesystem
-mounted with DAX on a persistent memory device through the NVML
+mounted with DAX on a persistent memory device through the PMDK
libpmem library.
.SS "I/O engine specific parameters"
In addition, there are some parameters which are only valid when a specific
.BI (sg)writefua \fR=\fPbool
With writefua option set to 1, write operations include the force
unit access (fua) flag. Default: 0.
+.TP
+.BI (sg)sg_write_mode \fR=\fPstr
+Specify the type of write commands to issue. This option can take three
+values:
+.RS
+.RS
+.TP
+.B write (default)
+Write opcodes are issued as usual
+.TP
+.B verify
+Issue WRITE AND VERIFY commands. The BYTCHK bit is set to 0. This
+directs the device to carry out a medium verification with no data
+comparison. The writefua option is ignored with this selection.
+.TP
+.B same
+Issue WRITE SAME commands. This transfers a single block to the device
+and writes this same block of data to a contiguous sequence of LBAs
+beginning at the specified offset. fio's block size parameter
+specifies the amount of data written with each command. However, the
+amount of data actually transferred to the device is equal to the
+device's block (sector) size. For a device with 512 byte sectors,
+blocksize=8k will write 16 sectors with each command. fio will still
+generate 8k of data for each command butonly the first 512 bytes will
+be used and transferred to the device. The writefua option is ignored
+with this selection.
+
.SS "I/O depth"
.TP
.BI iodepth \fR=\fPint
still respecting ordering. The result is the same I/O pattern to a given
device, but different timings.
.TP
+.BI replay_time_scale \fR=\fPint
+When replaying I/O with \fBread_iolog\fR, fio will honor the original timing
+in the trace. With this option, it's possible to scale the time. It's a
+percentage option, if set to 50 it means run at 50% the original IO rate in
+the trace. If set to 200, run at twice the original IO rate. Defaults to 100.
+.TP
.BI replay_redirect \fR=\fPstr
While replaying I/O patterns using \fBread_iolog\fR the default behavior
is to replay the IOPS onto the major/minor device that each IOP was recorded
Scale sector offsets down by this factor when replaying traces.
.SS "Threads, processes and job synchronization"
.TP
+.BI replay_skip \fR=\fPstr
+Sometimes it's useful to skip certain IO types in a replay trace. This could
+be, for instance, eliminating the writes in the trace. Or not replaying the
+trims/discards, if you are redirecting to a device that doesn't support them.
+This option takes a comma separated list of read, write, trim, sync.
+.TP
.BI thread
Fio defaults to creating jobs by using fork, however if this option is
given, fio will create jobs by using POSIX Threads' function
.BI prioclass \fR=\fPint
Set the I/O priority class. See man \fBionice\fR\|(1).
.TP
-.BI cpumask \fR=\fPint
-Set the CPU affinity of this job. The parameter given is a bit mask of
-allowed CPUs the job may run on. So if you want the allowed CPUs to be 1
-and 5, you would pass the decimal value of (1 << 1 | 1 << 5), or 34. See man
-\fBsched_setaffinity\fR\|(2). This may not work on all supported
-operating systems or kernel versions. This option doesn't work well for a
-higher CPU count than what you can store in an integer mask, so it can only
-control cpus 1\-32. For boxes with larger CPU counts, use
-\fBcpus_allowed\fR.
-.TP
.BI cpus_allowed \fR=\fPstr
Controls the same options as \fBcpumask\fR, but accepts a textual
-specification of the permitted CPUs instead. So to use CPUs 1 and 5 you
-would specify `cpus_allowed=1,5'. This option also allows a range of CPUs
-to be specified \-\- say you wanted a binding to CPUs 1, 5, and 8 to 15, you
-would set `cpus_allowed=1,5,8\-15'.
+specification of the permitted CPUs instead and CPUs are indexed from 0. So
+to use CPUs 0 and 5 you would specify `cpus_allowed=0,5'. This option also
+allows a range of CPUs to be specified \-\- say you wanted a binding to CPUs
+0, 5, and 8 to 15, you would set `cpus_allowed=0,5,8\-15'.
+.RS
+.P
+On Windows, when `cpus_allowed' is unset only CPUs from fio's current
+processor group will be used and affinity settings are inherited from the
+system. An fio build configured to target Windows 7 makes options that set
+CPUs processor group aware and values will set both the processor group
+and a CPU from within that group. For example, on a system where processor
+group 0 has 40 CPUs and processor group 1 has 32 CPUs, `cpus_allowed'
+values between 0 and 39 will bind CPUs from processor group 0 and
+`cpus_allowed' values between 40 and 71 will bind CPUs from processor
+group 1. When using `cpus_allowed_policy=shared' all CPUs specified by a
+single `cpus_allowed' option must be from the same processor group. For
+Windows fio builds not built for Windows 7, CPUs will only be selected from
+(and be relative to) whatever processor group fio happens to be running in
+and CPUs from other processor groups cannot be used.
+.RE
.TP
.BI cpus_allowed_policy \fR=\fPstr
Set the policy of how fio distributes the CPUs specified by
in the set.
.RE
.TP
+.BI cpumask \fR=\fPint
+Set the CPU affinity of this job. The parameter given is a bit mask of
+allowed CPUs the job may run on. So if you want the allowed CPUs to be 1
+and 5, you would pass the decimal value of (1 << 1 | 1 << 5), or 34. See man
+\fBsched_setaffinity\fR\|(2). This may not work on all supported
+operating systems or kernel versions. This option doesn't work well for a
+higher CPU count than what you can store in an integer mask, so it can only
+control cpus 1\-32. For boxes with larger CPU counts, use
+\fBcpus_allowed\fR.
+.TP
.BI numa_cpu_nodes \fR=\fPstr
Set this job running on specified NUMA nodes' CPUs. The arguments allow
comma delimited list of cpu numbers, A\-B ranges, or `all'. Note, to enable
the verify will be of the newly written data.
.RE
.TP
-.BI verifysort \fR=\fPbool
-If true, fio will sort written verify blocks when it deems it faster to read
-them back in a sorted manner. This is often the case when overwriting an
-existing file, since the blocks are already laid out in the file system. You
-can ignore this option unless doing huge amounts of really fast I/O where
-the red\-black tree sorting CPU time becomes significant. Default: true.
-.TP
-.BI verifysort_nr \fR=\fPint
-Pre\-load and sort verify blocks for a read workload.
-.TP
.BI verify_offset \fR=\fPint
Swap the verification header with data somewhere else in the block before
writing. It is swapped back before verifying.
.BI log_compression_cpus \fR=\fPstr
Define the set of CPUs that are allowed to handle online log compression for
the I/O jobs. This can provide better isolation between performance
-sensitive jobs, and background compression work.
+sensitive jobs, and background compression work. See \fBcpus_allowed\fR for
+the format used.
.TP
.BI log_store_compressed \fR=\fPbool
If set, fio will store the log files in a compressed format. They can be
projects / fio.git / blobdiff