.BI (sg)writefua \fR=\fPbool
With writefua option set to 1, write operations include the force
unit access (fua) flag. Default: 0.
+.TP
+.BI (sg)sg_write_mode \fR=\fPstr
+Specify the type of write commands to issue. This option can take three
+values:
+.RS
+.RS
+.TP
+.B write (default)
+Write opcodes are issued as usual
+.TP
+.B verify
+Issue WRITE AND VERIFY commands. The BYTCHK bit is set to 0. This
+directs the device to carry out a medium verification with no data
+comparison. The writefua option is ignored with this selection.
+.TP
+.B same
+Issue WRITE SAME commands. This transfers a single block to the device
+and writes this same block of data to a contiguous sequence of LBAs
+beginning at the specified offset. fio's block size parameter
+specifies the amount of data written with each command. However, the
+amount of data actually transferred to the device is equal to the
+device's block (sector) size. For a device with 512 byte sectors,
+blocksize=8k will write 16 sectors with each command. fio will still
+generate 8k of data for each command butonly the first 512 bytes will
+be used and transferred to the device. The writefua option is ignored
+with this selection.
+
.SS "I/O depth"
.TP
.BI iodepth \fR=\fPint
Scale sector offsets down by this factor when replaying traces.
.SS "Threads, processes and job synchronization"
.TP
+.BI replay_skip \fR=\fPstr
+Sometimes it's useful to skip certain IO types in a replay trace. This could
+be, for instance, eliminating the writes in the trace. Or not replaying the
+trims/discards, if you are redirecting to a device that doesn't support them.
+This option takes a comma separated list of read, write, trim, sync.
+.TP
.BI thread
Fio defaults to creating jobs by using fork, however if this option is
given, fio will create jobs by using POSIX Threads' function