-.TH fio 1 "September 2007" "User Manual"
+.TH fio 1 "October 2013" "User Manual"
.SH NAME
fio \- flexible I/O tester
.SH SYNOPSIS
.B \-\-minimal
Print statistics in a terse, semicolon-delimited format.
.TP
+.B \-\-append-terse
+Print statistics in selected mode AND terse, semicolon-delimited format.
+.TP
.B \-\-version
Display version information and exit.
.TP
.B \-\-help
Display usage information and exit.
.TP
+.B \-\-cpuclock-test
+Perform test and validation of internal CPU clock
+.TP
+.BI \-\-crctest[\fR=\fPtest]
+Test the speed of the builtin checksumming functions. If no argument is given,
+all of them are tested. Or a comma separated list can be passed, in which
+case the given ones are tested.
+.TP
.BI \-\-cmdhelp \fR=\fPcommand
Print help information for \fIcommand\fR. May be `all' for all commands.
.TP
Specifies when real-time ETA estimate should be printed. \fIwhen\fR may
be one of `always', `never' or `auto'.
.TP
+.BI \-\-eta\-newline \fR=\fPtime
+Force an ETA newline for every `time` period passed.
+.TP
+.BI \-\-status\-interval \fR=\fPtime
+Report full output status every `time` period passed.
+.TP
.BI \-\-readonly
Turn on safety read-only checks, preventing any attempted write.
.TP
.BI \-\-section \fR=\fPsec
-Only run section \fIsec\fR from job file. Multiple of these options can be given, adding more sections to run.
+Only run section \fIsec\fR from job file. This option can be used multiple times to add more sections to run.
.TP
.BI \-\-alloc\-size \fR=\fPkb
Set the internal smalloc pool size to \fIkb\fP kilobytes.
may override any parameter set in global sections.
.SH "JOB PARAMETERS"
.SS Types
-Some parameters may take arguments of a specific type. The types used are:
+Some parameters may take arguments of a specific type.
+Anywhere a numeric value is required, an arithmetic expression may be used,
+provided it is surrounded by parentheses. Supported operators are:
+.RS
+.RS
+.TP
+.B addition (+)
+.TP
+.B subtraction (-)
+.TP
+.B multiplication (*)
+.TP
+.B division (/)
+.TP
+.B modulus (%)
+.TP
+.B exponentiation (^)
+.RE
+.RE
+.P
+For time values in expressions, units are microseconds by default. This is
+different than for time values not in expressions (not enclosed in
+parentheses). The types used are:
.TP
.I str
String: a sequence of alphanumeric characters.
SI integer: a whole number, possibly containing a suffix denoting the base unit
of the value. Accepted suffixes are `k', 'M', 'G', 'T', and 'P', denoting
kilo (1024), mega (1024^2), giga (1024^3), tera (1024^4), and peta (1024^5)
-respectively. The suffix is not case sensitive. If prefixed with '0x', the
-value is assumed to be base 16 (hexadecimal). A suffix may include a trailing 'b',
-for instance 'kb' is identical to 'k'. You can specify a base 10 value
-by using 'KiB', 'MiB', 'GiB', etc. This is useful for disk drives where
-values are often given in base 10 values. Specifying '30GiB' will get you
-30*1000^3 bytes.
+respectively. If prefixed with '0x', the value is assumed to be base 16
+(hexadecimal). A suffix may include a trailing 'b', for instance 'kb' is
+identical to 'k'. You can specify a base 10 value by using 'KiB', 'MiB','GiB',
+etc. This is useful for disk drives where values are often given in base 10
+values. Specifying '30GiB' will get you 30*1000^3 bytes.
+When specifying times the default suffix meaning changes, still denoting the
+base unit of the value, but accepted suffixes are 'D' (days), 'H' (hours), 'M'
+(minutes), 'S' Seconds, 'ms' (or msec) milli seconds, 'us' (or 'usec') micro
+seconds. Time values without a unit specify seconds.
+The suffixes are not case sensitive.
.TP
.I bool
Boolean: a true or false value. `0' denotes false, `1' denotes true.
.TP
.I float_list
List of floating numbers: A list of floating numbers, separated by
-a ':' charcater.
+a ':' character.
.SS "Parameter List"
.TP
.BI name \fR=\fPstr
.BI directory \fR=\fPstr
Prefix filenames with this directory. Used to place files in a location other
than `./'.
+You can specify a number of directories by separating the names with a ':'
+character. These directories will be assigned equally distributed to job clones
+creates with \fInumjobs\fR as long as they are using generated filenames.
+If specific \fIfilename(s)\fR are set fio will use the first listed directory,
+and thereby matching the \fIfilename\fR semantic which generates a file each
+clone if not specified, but let all clones use the same if set. See
+\fIfilename\fR for considerations regarding escaping certain characters on
+some platforms.
.TP
.BI filename \fR=\fPstr
.B fio
If the I/O engine is file-based, you can specify
a number of files by separating the names with a `:' character. `\-' is a
reserved name, meaning stdin or stdout, depending on the read/write direction
-set.
+set. On Windows, disk devices are accessed as \\.\PhysicalDrive0 for the first
+device, \\.\PhysicalDrive1 for the second etc. Note: Windows and FreeBSD
+prevent write access to areas of the disk containing in-use data
+(e.g. filesystems). If the wanted filename does need to include a colon, then
+escape that with a '\\' character. For instance, if the filename is
+"/dev/dsk/foo@3,0:c", then you would use filename="/dev/dsk/foo@3,0\\:c".
.TP
.BI filename_format \fR=\fPstr
-.B If sharing multiple files between jobs, it is usually necessary to have
+If sharing multiple files between jobs, it is usually necessary to have
fio generate the exact names that you want. By default, fio will name a file
based on the default file format specification of
\fBjobname.jobnumber.filenumber\fP. With this option, that can be
No locking. This is the default.
.TP
.B exclusive
-Only one thread or process may do IO at the time, excluding all others.
+Only one thread or process may do IO at a time, excluding all others.
.TP
.B readwrite
Read-write locking on the file. Many readers may access the file at the same
time, but writes get exclusive access.
.RE
+.RE
.P
.BI opendir \fR=\fPstr
Recursively open any files below directory \fIstr\fR.
.B write
Sequential writes.
.TP
+.B trim
+Sequential trim (Linux block devices only).
+.TP
.B randread
Random reads.
.TP
.B randwrite
Random writes.
.TP
+.B randtrim
+Random trim (Linux block devices only).
+.TP
.B rw, readwrite
Mixed sequential reads and writes.
.TP
.BI kb_base \fR=\fPint
The base unit for a kilobyte. The defacto base is 2^10, 1024. Storage
manufacturers like to use 10^3 or 1000 as a base ten unit instead, for obvious
-reasons. Allow values are 1024 or 1000, with 1024 being the default.
+reasons. Allowed values are 1024 or 1000, with 1024 being the default.
.TP
.BI unified_rw_reporting \fR=\fPbool
Fio normally reports statistics on a per data direction basis, meaning that
read, write, and trim are accounted and reported separately. If this option is
-set, the fio will sum the results and report them as "mixed" instead.
+set fio sums the results and reports them as "mixed" instead.
.TP
.BI randrepeat \fR=\fPbool
-Seed the random number generator in a predictable way so results are repeatable
-across runs. Default: true.
+Seed the random number generator used for random I/O patterns in a predictable
+way so the pattern is repeatable across runs. Default: true.
+.TP
+.BI allrandrepeat \fR=\fPbool
+Seed all random number generators in a predictable way so results are
+repeatable across runs. Default: false.
+.TP
+.BI randseed \fR=\fPint
+Seed the random number generators based on this seed value, to be able to
+control what sequence of output is being generated. If not set, the random
+sequence depends on the \fBrandrepeat\fR setting.
.TP
.BI use_os_rand \fR=\fPbool
-Fio can either use the random generator supplied by the OS to generator random
-offsets, or it can use it's own internal generator (based on Tausworthe).
+Fio can either use the random generator supplied by the OS to generate random
+offsets, or it can use its own internal generator (based on Tausworthe).
Default is to use the internal generator, which is often of better quality and
faster. Default: false.
.TP
Do not pre-allocate space.
.TP
.B posix
-Pre-allocate via posix_fallocate().
+Pre-allocate via \fBposix_fallocate\fR\|(3).
.TP
.B keep
-Pre-allocate via fallocate() with FALLOC_FL_KEEP_SIZE set.
+Pre-allocate via \fBfallocate\fR\|(2) with FALLOC_FL_KEEP_SIZE set.
.TP
.B 0
Backward-compatible alias for 'none'.
.RE
.TP
.BI fadvise_hint \fR=\fPbool
-Use of \fIposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
+Use \fBposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
are likely to be issued. Default: true.
.TP
.BI size \fR=\fPint
Total size of I/O for this job. \fBfio\fR will run until this many bytes have
-been transfered, unless limited by other options (\fBruntime\fR, for instance).
+been transferred, unless limited by other options (\fBruntime\fR, for instance).
Unless \fBnrfiles\fR and \fBfilesize\fR options are given, this amount will be
divided between the available files for the job. If not set, fio will use the
-full size of the given files or devices. If the the files do not exist, size
+full size of the given files or devices. If the files do not exist, size
must be given. It is also possible to give size as a percentage between 1 and
-100. If size=20% is given, fio will use 20% of the full size of the given files
-or devices.
+100. If size=20% is given, fio will use 20% of the full size of the given
+files or devices.
+.TP
+.BI io_limit \fR=\fPint
+Normally fio operates within the region set by \fBsize\fR, which means that
+the \fBsize\fR option sets both the region and size of IO to be performed.
+Sometimes that is not what you want. With this option, it is possible to
+define just the amount of IO that fio should do. For instance, if \fBsize\fR
+is set to 20G and \fBio_limit\fR is set to 5G, fio will perform IO within
+the first 20G but exit when 5G have been done.
.TP
.BI fill_device \fR=\fPbool "\fR,\fB fill_fs" \fR=\fPbool
Sets size to something really large and waits for ENOSPC (no space left on
that is given). If \fBfilesize\fR is not specified, each created file is the
same size.
.TP
+.BI file_append \fR=\fPbool
+Perform IO after the end of the file. Normally fio will operate within the
+size of a file. If this option is set, then fio will append to the file
+instead. This has identical behavior to setting \fRoffset\fP to the size
+of a file. This option is ignored on non-regular files.
+.TP
.BI blocksize \fR=\fPint[,int] "\fR,\fB bs" \fR=\fPint[,int]
-Block size for I/O units. Default: 4k. Values for reads and writes can be
-specified separately in the format \fIread\fR,\fIwrite\fR, either of
-which may be empty to leave that value at its default.
+Block size for I/O units. Default: 4k. Values for reads, writes, and trims
+can be specified separately in the format \fIread\fR,\fIwrite\fR,\fItrim\fR
+either of which may be empty to leave that value at its default. If a trailing
+comma isn't given, the remainder will inherit the last value set.
.TP
.BI blocksize_range \fR=\fPirange[,irange] "\fR,\fB bsrange" \fR=\fPirange[,irange]
Specify a range of I/O block sizes. The issued I/O unit will always be a
multiple of the minimum size, unless \fBblocksize_unaligned\fR is set. Applies
to both reads and writes if only one range is given, but can be specified
-separately with a comma seperating the values. Example: bsrange=1k-4k,2k-8k.
+separately with a comma separating the values. Example: bsrange=1k-4k,2k-8k.
Also (see \fBblocksize\fR).
.TP
.BI bssplit \fR=\fPstr
This option is mutually exclusive with using a random map for files, so it
will turn off that option.
.TP
+.BI bs_is_seq_rand \fR=\fPbool
+If this option is set, fio will use the normal read,write blocksize settings as
+sequential,random instead. Any random read or write will use the WRITE
+blocksize settings, and any sequential read or write will use the READ
+blocksize setting.
+.TP
.B zero_buffers
-Initialise buffers with all zeros. Default: fill buffers with random data.
+Initialize buffers with all zeros. Default: fill buffers with random data.
+The resulting IO buffers will not be completely zeroed, unless
+\fPscramble_buffers\fR is also turned off.
.TP
.B refill_buffers
If this option is given, fio will refill the IO buffers on every submit. The
the remaining zeroed. With this set to some chunk size smaller than the block
size, fio can alternate random and zeroed data throughout the IO buffer.
.TP
+.BI buffer_pattern \fR=\fPstr
+If set, fio will fill the IO buffers with this pattern. If not set, the contents
+of IO buffers is defined by the other options related to buffer contents. The
+setting can be any pattern of bytes, and can be prefixed with 0x for hex
+values. It may also be a string, where the string must then be wrapped with
+"".
+.TP
+.BI dedupe_percentage \fR=\fPint
+If set, fio will generate this percentage of identical buffers when writing.
+These buffers will be naturally dedupable. The contents of the buffers depend
+on what other buffer compression settings have been set. It's possible to have
+the individual buffers either fully compressible, or not at all. This option
+only controls the distribution of unique buffers.
+.TP
.BI nrfiles \fR=\fPint
Number of files to use for this job. Default: 1.
.TP
.RS
.TP
.B random
-Choose a file at random
+Choose a file at random.
.TP
.B roundrobin
-Round robin over open files (default).
+Round robin over opened files (default).
+.TP
.B sequential
Do each file in the set sequentially.
.RE
.P
-The number of I/Os to issue before switching a new file can be specified by
+The number of I/Os to issue before switching to a new file can be specified by
appending `:\fIint\fR' to the service type.
.RE
.TP
.RS
.TP
.B sync
-Basic \fIread\fR\|(2) or \fIwrite\fR\|(2) I/O. \fIfseek\fR\|(2) is used to
+Basic \fBread\fR\|(2) or \fBwrite\fR\|(2) I/O. \fBfseek\fR\|(2) is used to
position the I/O location.
.TP
.B psync
-Basic \fIpread\fR\|(2) or \fIpwrite\fR\|(2) I/O.
+Basic \fBpread\fR\|(2) or \fBpwrite\fR\|(2) I/O.
.TP
.B vsync
-Basic \fIreadv\fR\|(2) or \fIwritev\fR\|(2) I/O. Will emulate queuing by
-coalescing adjacents IOs into a single submission.
+Basic \fBreadv\fR\|(2) or \fBwritev\fR\|(2) I/O. Will emulate queuing by
+coalescing adjacent IOs into a single submission.
+.TP
+.B pvsync
+Basic \fBpreadv\fR\|(2) or \fBpwritev\fR\|(2) I/O.
.TP
.B libaio
Linux native asynchronous I/O. This ioengine defines engine specific options.
.TP
.B posixaio
-POSIX asynchronous I/O using \fIaio_read\fR\|(3) and \fIaio_write\fR\|(3).
+POSIX asynchronous I/O using \fBaio_read\fR\|(3) and \fBaio_write\fR\|(3).
.TP
.B solarisaio
Solaris native asynchronous I/O.
Windows native asynchronous I/O.
.TP
.B mmap
-File is memory mapped with \fImmap\fR\|(2) and data copied using
-\fImemcpy\fR\|(3).
+File is memory mapped with \fBmmap\fR\|(2) and data copied using
+\fBmemcpy\fR\|(3).
.TP
.B splice
-\fIsplice\fR\|(2) is used to transfer the data and \fIvmsplice\fR\|(2) to
+\fBsplice\fR\|(2) is used to transfer the data and \fBvmsplice\fR\|(2) to
transfer data from user-space to the kernel.
.TP
.B syslet-rw
.TP
.B sg
SCSI generic sg v3 I/O. May be either synchronous using the SG_IO ioctl, or if
-the target is an sg character device, we use \fIread\fR\|(2) and
-\fIwrite\fR\|(2) for asynchronous I/O.
+the target is an sg character device, we use \fBread\fR\|(2) and
+\fBwrite\fR\|(2) for asynchronous I/O.
.TP
.B null
Doesn't transfer any data, just pretends to. Mainly used to exercise \fBfio\fR
This ioengine defines engine specific options.
.TP
.B netsplice
-Like \fBnet\fR, but uses \fIsplice\fR\|(2) and \fIvmsplice\fR\|(2) to map data
+Like \fBnet\fR, but uses \fBsplice\fR\|(2) and \fBvmsplice\fR\|(2) to map data
and send/receive. This ioengine defines engine specific options.
.TP
.B cpuio
.TP
.B guasi
The GUASI I/O engine is the Generic Userspace Asynchronous Syscall Interface
-approach to asycnronous I/O.
+approach to asynchronous I/O.
.br
See <http://www.xmailserver.org/guasi\-lib.html>.
.TP
`:\fIenginepath\fR'.
.TP
.B falloc
- IO engine that does regular linux native fallocate callt to simulate data
+ IO engine that does regular linux native fallocate call to simulate data
transfer as fio ioengine
.br
DDIR_READ does fallocate(,mode = FALLOC_FL_KEEP_SIZE,)
.B e4defrag
IO engine that does regular EXT4_IOC_MOVE_EXT ioctls to simulate defragment activity
request to DDIR_WRITE event
+.TP
+.B rbd
+IO engine supporting direct access to Ceph Rados Block Devices (RBD) via librbd
+without the need to use the kernel rbd driver. This ioengine defines engine specific
+options.
+.TP
+.B gfapi
+Using Glusterfs libgfapi sync interface to direct access to Glusterfs volumes without
+having to go through FUSE. This ioengine defines engine specific
+options.
+.TP
+.B gfapi_async
+Using Glusterfs libgfapi async interface to direct access to Glusterfs volumes without
+having to go through FUSE. This ioengine defines engine specific
+options.
+.TP
+.B libhdfs
+Read and write through Hadoop (HDFS). The \fBfilename\fR option is used to
+specify host,port of the hdfs name-node to connect. This engine interprets
+offsets a little differently. In HDFS, files once created cannot be modified.
+So random writes are not possible. To imitate this, libhdfs engine expects
+bunch of small files to be created over HDFS, and engine will randomly pick a
+file out of those files based on the offset generated by fio backend. (see the
+example job file to create such files, use rw=write option). Please note, you
+might want to set necessary environment variables to work with hdfs/libhdfs
+properly.
.RE
.P
.RE
.BI iodepth \fR=\fPint
Number of I/O units to keep in flight against the file. Note that increasing
iodepth beyond 1 will not affect synchronous ioengines (except for small
-degress when verify_async is in use). Even async engines my impose OS
+degress when verify_async is in use). Even async engines may impose OS
restrictions causing the desired depth not to be achieved. This may happen on
Linux when using libaio and not setting \fBdirect\fR=1, since buffered IO is
not async on that OS. Keep an eye on the IO depth distribution in the
.BI direct \fR=\fPbool
If true, use non-buffered I/O (usually O_DIRECT). Default: false.
.TP
+.BI atomic \fR=\fPbool
+If value is true, attempt to use atomic direct IO. Atomic writes are guaranteed
+to be stable once acknowledged by the operating system. Only Linux supports
+O_ATOMIC right now.
+.TP
.BI buffered \fR=\fPbool
If true, use buffered I/O. This is the opposite of the \fBdirect\fR parameter.
Default: true.
.TP
.BI offset_increment \fR=\fPint
If this is provided, then the real offset becomes the
-offset + offset_increment * thread_number, where the thread number is a counter
-that starts at 0 and is incremented for each job. This option is useful if
-there are several jobs which are intended to operate on a file in parallel in
-disjoint segments, with even spacing between the starting points.
+offset + offset_increment * thread_number, where the thread number is a
+counter that starts at 0 and is incremented for each sub-job (i.e. when
+numjobs option is specified). This option is useful if there are several jobs
+which are intended to operate on a file in parallel disjoint segments, with
+even spacing between the starting points.
+.TP
+.BI number_ios \fR=\fPint
+Fio will normally perform IOs until it has exhausted the size of the region
+set by \fBsize\fR, or if it exhaust the allocated time (or hits an error
+condition). With this setting, the range/size can be set independently of
+the number of IOs to perform. When fio reaches this number, it will exit
+normally and report status. Note that this does not extend the amount
+of IO that will be done, it will only stop fio if this condition is met
+before other end-of-job criteria.
.TP
.BI fsync \fR=\fPint
How many I/Os to perform before issuing an \fBfsync\fR\|(2) of dirty data. If
Like \fBfsync\fR, but uses \fBfdatasync\fR\|(2) instead to only sync the
data parts of the file. Default: 0.
.TP
+.BI write_barrier \fR=\fPint
+Make every Nth write a barrier write.
+.TP
.BI sync_file_range \fR=\fPstr:int
-Use sync_file_range() for every \fRval\fP number of write operations. Fio will
-track range of writes that have happened since the last sync_file_range() call.
+Use \fBsync_file_range\fR\|(2) for every \fRval\fP number of write operations. Fio will
+track range of writes that have happened since the last \fBsync_file_range\fR\|(2) call.
\fRstr\fP can currently be one or more of:
.RS
.TP
.P
So if you do sync_file_range=wait_before,write:8, fio would use
\fBSYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE\fP for every 8 writes.
-Also see the sync_file_range(2) man page. This option is Linux specific.
+Also see the \fBsync_file_range\fR\|(2) man page. This option is Linux specific.
.TP
.BI overwrite \fR=\fPbool
If writing, setup the file first and do overwrites. Default: false.
random_distribution=zipf:1.2 as the option. If a non-uniform model is used,
fio will disable use of the random map.
.TP
+.BI percentage_random \fR=\fPint
+For a random workload, set how big a percentage should be random. This defaults
+to 100%, in which case the workload is fully random. It can be set from
+anywhere from 0 to 100. Setting it to 0 would make the workload fully
+sequential. It is possible to set different values for reads, writes, and
+trim. To do so, simply use a comma separated list. See \fBblocksize\fR.
+.TP
.B norandommap
Normally \fBfio\fR will cover every block of the file when doing random I/O. If
this parameter is given, a new offset will be chosen without looking at past
workload, fio may read or write some blocks multiple times.
.TP
.BI nice \fR=\fPint
-Run job with given nice value. See \fInice\fR\|(2).
+Run job with given nice value. See \fBnice\fR\|(2).
.TP
.BI prio \fR=\fPint
Set I/O priority value of this job between 0 (highest) and 7 (lowest). See
-\fIionice\fR\|(1).
+\fBionice\fR\|(1).
.TP
.BI prioclass \fR=\fPint
-Set I/O priority class. See \fIionice\fR\|(1).
+Set I/O priority class. See \fBionice\fR\|(1).
.TP
.BI thinktime \fR=\fPint
Stall job for given number of microseconds between issuing I/Os.
of the time specified by \fBthinktime\fR. Only valid if \fBthinktime\fR is set.
.TP
.BI thinktime_blocks \fR=\fPint
-Number of blocks to issue before waiting \fBthinktime\fR microseconds.
+Only valid if thinktime is set - control how many blocks to issue, before
+waiting \fBthinktime\fR microseconds. If not set, defaults to 1 which will
+make fio wait \fBthinktime\fR microseconds after every block. This
+effectively makes any queue depth setting redundant, since no more than 1 IO
+will be queued before we have to complete it and do our thinktime. In other
+words, this setting effectively caps the queue depth if the latter is larger.
Default: 1.
.TP
.BI rate \fR=\fPint
.BI rate_iops \fR=\fPint
Cap the bandwidth to this number of IOPS. Basically the same as rate, just
specified independently of bandwidth. The same format as \fBrate\fR is used for
-read vs write seperation. If \fBblocksize\fR is a range, the smallest block
+read vs write separation. If \fBblocksize\fR is a range, the smallest block
size is used as the metric.
.TP
.BI rate_iops_min \fR=\fPint
If this rate of I/O is not met, the job will exit. The same format as \fBrate\fR
-is used for read vs write seperation.
+is used for read vs write separation.
.TP
.BI ratecycle \fR=\fPint
Average bandwidth for \fBrate\fR and \fBratemin\fR over this number of
milliseconds. Default: 1000ms.
.TP
+.BI latency_target \fR=\fPint
+If set, fio will attempt to find the max performance point that the given
+workload will run at while maintaining a latency below this target. The
+values is given in microseconds. See \fBlatency_window\fR and
+\fBlatency_percentile\fR.
+.TP
+.BI latency_window \fR=\fPint
+Used with \fBlatency_target\fR to specify the sample window that the job
+is run at varying queue depths to test the performance. The value is given
+in microseconds.
+.TP
+.BI latency_percentile \fR=\fPfloat
+The percentage of IOs that must fall within the criteria specified by
+\fBlatency_target\fR and \fBlatency_window\fR. If not set, this defaults
+to 100.0, meaning that all IOs must be equal or below to the value set
+by \fBlatency_target\fR.
+.TP
.BI max_latency \fR=\fPint
If set, fio will exit the job if it exceeds this maximum latency. It will exit
with an ETIME error.
.BI cpus_allowed \fR=\fPstr
Same as \fBcpumask\fR, but allows a comma-delimited list of CPU numbers.
.TP
+.BI cpus_allowed_policy \fR=\fPstr
+Set the policy of how fio distributes the CPUs specified by \fBcpus_allowed\fR
+or \fBcpumask\fR. Two policies are supported:
+.RS
+.RS
+.TP
+.B shared
+All jobs will share the CPU set specified.
+.TP
+.B split
+Each job will get a unique CPU from the CPU set.
+.RE
+.P
+\fBshared\fR is the default behaviour, if the option isn't specified. If
+\fBsplit\fR is specified, then fio will assign one cpu per job. If not enough
+CPUs are given for the jobs listed, then fio will roundrobin the CPUs in
+the set.
+.RE
+.P
+.TP
.BI numa_cpu_nodes \fR=\fPstr
-Set this job running on spcified NUMA nodes' CPUs. The arguments allow
+Set this job running on specified NUMA nodes' CPUs. The arguments allow
comma delimited list of cpu numbers, A-B ranges, or 'all'.
.TP
.BI numa_mem_policy \fR=\fPstr
Set this job's memory policy and corresponding NUMA nodes. Format of
-the argements:
+the arguments:
.RS
.TP
.B <mode>[:<nodelist>]
allowed. For \fBbind\fR and \fBinterleave\fR, \fBnodelist\fR allows
comma delimited list of numbers, A-B ranges, or 'all'.
.TP
-.BI startdelay \fR=\fPint
-Delay start of job for the specified number of seconds.
+.BI startdelay \fR=\fPirange
+Delay start of job for the specified number of seconds. Supports all time
+suffixes to allow specification of hours, minutes, seconds and
+milliseconds - seconds are the default if a unit is ommited.
+Can be given as a range which causes each thread to choose randomly out of the
+range.
.TP
.BI runtime \fR=\fPint
Terminate processing after the specified number of seconds.
.RS
.TP
.B malloc
-Allocate memory with \fImalloc\fR\|(3).
+Allocate memory with \fBmalloc\fR\|(3).
.TP
.B shm
-Use shared memory buffers allocated through \fIshmget\fR\|(2).
+Use shared memory buffers allocated through \fBshmget\fR\|(2).
.TP
.B shmhuge
Same as \fBshm\fR, but use huge pages as backing.
.TP
.B mmap
-Use \fImmap\fR\|(2) for allocation. Uses anonymous memory unless a filename
+Use \fBmmap\fR\|(2) for allocation. Uses anonymous memory unless a filename
is given after the option in the format `:\fIfile\fR'.
.TP
.B mmaphuge
.RE
.TP
.BI iomem_align \fR=\fPint "\fR,\fP mem_align" \fR=\fPint
-This indiciates the memory alignment of the IO memory buffers. Note that the
+This indicates the memory alignment of the IO memory buffers. Note that the
given alignment is applied to the first IO unit buffer, if using \fBiodepth\fR
the alignment of the following buffers are given by the \fBbs\fR used. In
other words, if using a \fBbs\fR that is a multiple of the page sized in the
If true, serialize file creation for the jobs. Default: true.
.TP
.BI create_fsync \fR=\fPbool
-\fIfsync\fR\|(2) data file after creation. Default: true.
+\fBfsync\fR\|(2) data file after creation. Default: true.
.TP
.BI create_on_open \fR=\fPbool
If true, the files are not created until they are opened for IO by the job.
Specifies the number of iterations (runs of the same workload) of this job.
Default: 1.
.TP
+.BI verify_only \fR=\fPbool
+Do not perform the specified workload, only verify data still matches previous
+invocation of this workload. This option allows one to check data multiple
+times at a later date without overwriting it. This option makes sense only for
+workloads that write data, and does not support workloads with the
+\fBtime_based\fR option set.
+.TP
.BI do_verify \fR=\fPbool
Run the verify phase after a write phase. Only valid if \fBverify\fR is set.
Default: true.
.RS
.RS
.TP
-.B md5 crc16 crc32 crc32c crc32c-intel crc64 crc7 sha256 sha512 sha1
+.B md5 crc16 crc32 crc32c crc32c-intel crc64 crc7 sha256 sha512 sha1 xxhash
Store appropriate checksum in the header of each block. crc32c-intel is
hardware accelerated SSE4.2 driven, falls back to regular crc32c if
not supported by the system.
be of the newly written data.
.RE
.TP
-.BI verify_sort \fR=\fPbool
+.BI verifysort \fR=\fPbool
If true, written verify blocks are sorted if \fBfio\fR deems it to be faster to
read them back in a sorted manner. Default: true.
.TP
+.BI verifysort_nr \fR=\fPint
+Pre-load and sort verify blocks for a read workload.
+.TP
.BI verify_offset \fR=\fPint
Swap the verification header with data somewhere else in the block before
writing. It is swapped back before verifying.
\fBverify_backlog_batch\fR is larger than \fBverify_backlog\fR, some blocks
will be verified more than once.
.TP
+.BI trim_percentage \fR=\fPint
+Number of verify blocks to discard/trim.
+.TP
+.BI trim_verify_zero \fR=\fPbool
+Verify that trim/discarded blocks are returned as zeroes.
+.TP
+.BI trim_backlog \fR=\fPint
+Trim after this number of blocks are written.
+.TP
+.BI trim_backlog_batch \fR=\fPint
+Trim this number of IO blocks.
+.TP
+.BI experimental_verify \fR=\fPbool
+Enable experimental verification.
+.TP
.B stonewall "\fR,\fP wait_for_previous"
Wait for preceding jobs in the job file to exit before starting this one.
\fBstonewall\fR implies \fBnew_group\fR.
.BI zonesize \fR=\fPint
Divide file into zones of the specified size in bytes. See \fBzoneskip\fR.
.TP
+.BI zonerange \fR=\fPint
+Give size of an IO zone. See \fBzoneskip\fR.
+.TP
.BI zoneskip \fR=\fPint
Skip the specified number of bytes when \fBzonesize\fR bytes of data have been
read.
If given, write a bandwidth log of the jobs in this job file. Can be used to
store data of the bandwidth of the jobs in their lifetime. The included
fio_generate_plots script uses gnuplot to turn these text files into nice
-graphs. See \fBwrite_log_log\fR for behaviour of given filename. For this
-option, the postfix is _bw.log.
+graphs. See \fBwrite_lat_log\fR for behaviour of given filename. For this
+option, the postfix is _bw.x.log, where x is the index of the job (1..N,
+where N is the number of jobs)
.TP
.BI write_lat_log \fR=\fPstr
Same as \fBwrite_bw_log\fR, but writes I/O completion latencies. If no
-filename is given with this option, the default filename of "jobname_type.log"
-is used. Even if the filename is given, fio will still append the type of log.
+filename is given with this option, the default filename of
+"jobname_type.x.log" is used, where x is the index of the job (1..N, where
+N is the number of jobs). Even if the filename is given, fio will still
+append the type of log.
.TP
.BI write_iops_log \fR=\fPstr
Same as \fBwrite_bw_log\fR, but writes IOPS. If no filename is given with this
-option, the default filename of "jobname_type.log" is used. Even if the
-filename is given, fio will still append the type of log.
+option, the default filename of "jobname_type.x.log" is used, where x is the
+index of the job (1..N, where N is the number of jobs). Even if the filename
+is given, fio will still append the type of log.
.TP
.BI log_avg_msec \fR=\fPint
By default, fio will log an entry in the iops, latency, or bw log for every
over the specified period of time, reducing the resolution of the log.
Defaults to 0.
.TP
+.BI log_offset \fR=\fPbool
+If this is set, the iolog options will include the byte offset for the IO
+entry as well as the other data values.
+.TP
+.BI log_compression \fR=\fPint
+If this is set, fio will compress the IO logs as it goes, to keep the memory
+footprint lower. When a log reaches the specified size, that chunk is removed
+and compressed in the background. Given that IO logs are fairly highly
+compressible, this yields a nice memory savings for longer runs. The downside
+is that the compression will consume some background CPU cycles, so it may
+impact the run. This, however, is also true if the logging ends up consuming
+most of the system memory. So pick your poison. The IO logs are saved
+normally at the end of a run, by decompressing the chunks and storing them
+in the specified log file. This feature depends on the availability of zlib.
+.TP
+.BI log_store_compressed \fR=\fPbool
+If set, and \fBlog\fR_compression is also set, fio will store the log files in
+a compressed format. They can be decompressed with fio, using the
+\fB\-\-inflate-log\fR command line parameter. The files will be stored with a
+\fB\.fz\fR suffix.
+.TP
.BI disable_lat \fR=\fPbool
Disable measurements of total latency numbers. Useful only for cutting
-back the number of calls to gettimeofday, as that does impact performance at
+back the number of calls to \fBgettimeofday\fR\|(2), as that does impact performance at
really high IOPS rates. Note that to really get rid of a large amount of these
calls, this option must be used with disable_slat and disable_bw as well.
.TP
.TP
.BI lockmem \fR=\fPint
Pin the specified amount of memory with \fBmlock\fR\|(2). Can be used to
-simulate a smaller amount of memory.
+simulate a smaller amount of memory. The amount specified is per worker.
.TP
.BI exec_prerun \fR=\fPstr
Before running the job, execute the specified command with \fBsystem\fR\|(3).
+.RS
+Output is redirected in a file called \fBjobname.prerun.txt\fR
+.RE
.TP
.BI exec_postrun \fR=\fPstr
Same as \fBexec_prerun\fR, but the command is executed after the job completes.
+.RS
+Output is redirected in a file called \fBjobname.postrun.txt\fR
+.RE
.TP
.BI ioscheduler \fR=\fPstr
Attempt to switch the device hosting the file to the specified I/O scheduler.
.TP
-.BI cpuload \fR=\fPint
-If the job is a CPU cycle-eater, attempt to use the specified percentage of
-CPU cycles.
-.TP
-.BI cpuchunks \fR=\fPint
-If the job is a CPU cycle-eater, split the load into cycles of the
-given time in milliseconds.
-.TP
.BI disk_util \fR=\fPbool
Generate disk utilization statistics if the platform supports it. Default: true.
.TP
.RS
.TP
.B gettimeofday
-gettimeofday(2)
+\fBgettimeofday\fR\|(2)
.TP
.B clock_gettime
-clock_gettime(2)
+\fBclock_gettime\fR\|(2)
.TP
.B cpu
Internal CPU clock source
means supporting TSC Invariant.
.TP
.BI gtod_reduce \fR=\fPbool
-Enable all of the gettimeofday() reducing options (disable_clat, disable_slat,
+Enable all of the \fBgettimeofday\fR\|(2) reducing options (disable_clat, disable_slat,
disable_bw) plus reduce precision of the timeout somewhat to really shrink the
-gettimeofday() call count. With this option enabled, we only do about 0.4% of
+\fBgettimeofday\fR\|(2) call count. With this option enabled, we only do about 0.4% of
the gtod() calls we would have done if all time keeping was enabled.
.TP
.BI gtod_cpu \fR=\fPint
Sometimes it's cheaper to dedicate a single thread of execution to just getting
the current time. Fio (and databases, for instance) are very intensive on
-gettimeofday() calls. With this option, you can set one CPU aside for doing
+\fBgettimeofday\fR\|(2) calls. With this option, you can set one CPU aside for doing
nothing but logging current time to a shared memory location. Then the other
threads/processes that run IO workloads need only copy that segment, instead of
-entering the kernel with a gettimeofday() call. The CPU set aside for doing
+entering the kernel with a \fBgettimeofday\fR\|(2) call. The CPU set aside for doing
these time calls will be excluded from other uses. Fio will manually clear it
from the CPU mask of other jobs.
.TP
If set dump every error even if it is non fatal, true by default. If disabled
only fatal error will be dumped
.TP
+.BI profile \fR=\fPstr
+Select a specific builtin performance test.
+.TP
.BI cgroup \fR=\fPstr
Add job to this control group. If it doesn't exist, it will be created.
The system must have a mounted cgroup blkio mount point for this to work. If
.BI gid \fR=\fPint
Set group ID, see \fBuid\fR.
.TP
+.BI unit_base \fR=\fPint
+Base unit for reporting. Allowed values are:
+.RS
+.TP
+.B 0
+Use auto-detection (default).
+.TP
+.B 8
+Byte based.
+.TP
+.B 1
+Bit based.
+.RE
+.P
+.TP
.BI flow_id \fR=\fPint
The ID of the flow. If not specified, it defaults to being a global flow. See
\fBflow\fR.
.SS "Ioengine Parameters List"
Some parameters are only valid when a specific ioengine is in use. These are
used identically to normal parameters, with the caveat that when used on the
-command line, the must come after the ioengine that defines them is selected.
+command line, they must come after the ioengine.
+.TP
+.BI (cpu)cpuload \fR=\fPint
+Attempt to use the specified percentage of CPU cycles.
+.TP
+.BI (cpu)cpuchunks \fR=\fPint
+Split the load into cycles of the given time. In microseconds.
+.TP
+.BI (cpu)exit_on_io_done \fR=\fPbool
+Detect when IO threads are done, then exit.
.TP
.BI (libaio)userspace_reap
Normally, with the libaio engine in use, fio will use
.BI (net,netsplice)hostname \fR=\fPstr
The host name or IP address to use for TCP or UDP based IO.
If the job is a TCP listener or UDP reader, the hostname is not
-used and must be omitted.
+used and must be omitted unless it is a valid UDP multicast address.
.TP
.BI (net,netsplice)port \fR=\fPint
The TCP or UDP port to bind to or connect to.
.TP
+.BI (net,netsplice)interface \fR=\fPstr
+The IP address of the network interface used to send or receive UDP multicast
+packets.
+.TP
+.BI (net,netsplice)ttl \fR=\fPint
+Time-to-live value for outgoing UDP multicast packets. Default: 1
+.TP
.BI (net,netsplice)nodelay \fR=\fPbool
Set TCP_NODELAY on TCP connections.
.TP
.B tcp
Transmission control protocol
.TP
+.B tcpv6
+Transmission control protocol V6
+.TP
.B udp
User datagram protocol
.TP
+.B udpv6
+User datagram protocol V6
+.TP
.B unix
UNIX domain socket
.RE
hostname must be omitted if this option is used.
.TP
.BI (net, pingpong) \fR=\fPbool
-Normal a network writer will just continue writing data, and a network reader
-will just consume packages. If pingpong=1 is set, a writer will send its normal
+Normally a network writer will just continue writing data, and a network reader
+will just consume packets. If pingpong=1 is set, a writer will send its normal
payload to the reader, then wait for the reader to send the same payload back.
This allows fio to measure network latencies. The submission and completion
latencies then measure local time spent sending or receiving, and the
completion latency measures how long it took for the other end to receive and
-send back.
+send back. For UDP multicast traffic pingpong=1 should only be set for a single
+reader when multiple readers are listening to the same address.
.TP
.BI (e4defrag,donorname) \fR=\fPstr
File will be used as a block donor (swap extents between files)
Preallocate donor's file on init
.TP
.BI 1:
-allocate space immidietly inside defragment event, and free right after event
+allocate space immediately inside defragment event, and free right after event
.RE
.TP
+.BI (rbd)rbdname \fR=\fPstr
+Specifies the name of the RBD.
+.TP
+.BI (rbd)pool \fR=\fPstr
+Specifies the name of the Ceph pool containing the RBD.
+.TP
+.BI (rbd)clientname \fR=\fPstr
+Specifies the username (without the 'client.' prefix) used to access the Ceph cluster.
.SH OUTPUT
While running, \fBfio\fR will display the status of the created jobs. For
example:
running, without terminating the job. To do that, send fio the \fBUSR1\fR
signal.
.SH TERSE OUTPUT
-If the \fB\-\-minimal\fR option is given, the results will be printed in a
-semicolon-delimited format suitable for scripted use - a job description
-(if provided) follows on a new line. Note that the first
+If the \fB\-\-minimal\fR / \fB\-\-append-terse\fR options are given, the
+results will be printed/appended in a semicolon-delimited format suitable for
+scripted use.
+A job description (if provided) follows on a new line. Note that the first
number in the line is the version number. If the output has to be changed
for some reason, this number will be incremented by 1 to signify that
change. The fields are:
projects / fio.git / blobdiff