.TP
.I int
SI integer: a whole number, possibly containing a suffix denoting the base unit
-of the value. Accepted suffixes are `k', 'M' and 'G', denoting kilo (1024),
-mega (1024*1024) and giga (1024*1024*1024) respectively. If prefixed with '0x',
-the value is assumed to be base 16 (hexadecimal).
+of the value. Accepted suffixes are `k', 'M', 'G', 'T', and 'P', denoting
+kilo (1024), mega (1024^2), giga (1024^3), tera (1024^4), and peta (1024^5)
+respectively. The suffix is not case sensitive. If prefixed with '0x', the
+value is assumed to be base 16 (hexadecimal).
.TP
.I bool
Boolean: a true or false value. `0' denotes false, `1' denotes true.
reserved name, meaning stdin or stdout, depending on the read/write direction
set.
.TP
+.BI lockfile \fR=\fPstr
+Fio defaults to not locking any files before it does IO to them. If a file or
+file descriptor is shared, fio can serialize IO to that file to make the end
+result consistent. This is usual for emulating real workloads that share files.
+The lock modes are:
+.RS
+.RS
+.TP
+.B none
+No locking. This is the default.
+.TP
+.B exclusive
+Only one thread or process may do IO at the time, excluding all others.
+.TP
+.B readwrite
+Read-write locking on the file. Many readers may access the file at the same
+time, but writes get exclusive access.
+.RE
+.P
+The option may be post-fixed with a lock batch number. If set, then each
+thread/process may do that amount of IOs to the file before giving up the lock.
+Since lock acquisition is expensive, batching the lock/unlocks will speed up IO.
+.RE
+.P
.BI opendir \fR=\fPstr
Recursively open any files below directory \fIstr\fR.
.TP
`:\fIint\fR' to the pattern type. The default is 1.
.RE
.TP
+.BI kb_base \fR=\fPint
+The base unit for a kilobyte. The defacto base is 2^10, 1024. Storage
+manufacturers like to use 10^3 or 1000 as a base ten unit instead, for obvious
+reasons. Allow values are 1024 or 1000, with 1024 being the default.
+.TP
.BI randrepeat \fR=\fPbool
Seed the random number generator in a predictable way so results are repeatable
across runs. Default: true.
Unless \fBnr_files\fR and \fBfilesize\fR options are given, this amount will be
divided between the available files for the job.
.TP
+.BI fill_device \fR=\fPbool
+Sets size to something really large and waits for ENOSPC (no space left on
+device) as the terminating condition. Only makes sense with sequential write.
+For a read workload, the mount point will be filled first then IO started on
+the result.
+.TP
.BI filesize \fR=\fPirange
Individual file sizes. May be a range, in which case \fBfio\fR will select sizes
for files at random within the given range, limited to \fBsize\fR in total (if
.BI iodepth_batch \fR=\fPint
Number of I/Os to submit at once. Default: \fBiodepth\fR.
.TP
+.BI iodepth_batch_complete \fR=\fPint
+This defines how many pieces of IO to retrieve at once. It defaults to 1 which
+ means that we'll ask for a minimum of 1 IO in the retrieval process from the
+kernel. The IO retrieval will go on until we hit the limit set by
+\fBiodepth_low\fR. If this variable is set to 0, then fio will always check for
+completed events before queuing more IO. This helps reduce IO latency, at the
+cost of more retrieval system calls.
+.TP
.BI iodepth_low \fR=\fPint
Low watermark indicating when to start filling the queue again. Default:
\fBiodepth\fR.
How many I/Os to perform before issuing an \fBfsync\fR\|(2) of dirty data. If
0, don't sync. Default: 0.
.TP
+.BI fdatasync \fR=\fPint
+Like \fBfsync\fR, but uses \fBfdatasync\fR\|(2) instead to only sync the
+data parts of the file. Default: 0.
+.TP
.BI overwrite \fR=\fPbool
If writing, setup the file first and do overwrites. Default: false.
.TP
this parameter is given, a new offset will be chosen without looking at past
I/O history. This parameter is mutually exclusive with \fBverify\fR.
.TP
+.B softrandommap
+See \fBnorandommap\fR. If fio runs with the random block map enabled and it
+fails to allocate the map, if this option is set it will continue without a
+random block map. As coverage will not be as complete as with random maps, this
+option is disabled by default.
+.TP
.BI nice \fR=\fPint
Run job with given nice value. See \fInice\fR\|(2).
.TP
have hugetlbfs mounted, and \fIfile\fR must point there.
.RE
.TP
+.BI iomem_align \fR=\fPint
+This indiciates the memory alignment of the IO memory buffers. Note that the
+given alignment is applied to the first IO unit buffer, if using \fBiodepth\fR
+the alignment of the following buffers are given by the \fBbs\fR used. In
+other words, if using a \fBbs\fR that is a multiple of the page sized in the
+system, all buffers will be aligned to this value. If using a \fBbs\fR that
+is not page aligned, the alignment of subsequent IO memory buffers is the
+sum of the \fBiomem_align\fR and \fBbs\fR used.
+.TP
.BI hugepage\-size \fR=\fPint
Defines the size of a huge page. Must be at least equal to the system setting.
-Should be a multiple of 1MiB. Default: 4MiB.
+Should be a multiple of 1MB. Default: 4MB.
.TP
.B exitall
Terminate all jobs when one finishes. Default: wait for each job to finish.
.BI pre_read \fR=\fPbool
If this is given, files will be pre-read into memory before starting the given
IO operation. This will also clear the \fR \fBinvalidate\fR flag, since it is
-pointless to pre-read and then drop the cache.
+pointless to pre-read and then drop the cache. This will only work for IO
+engines that are seekable, since they allow you to read the same data
+multiple times. Thus it will not work on eg network or splice IO.
.TP
.BI unlink \fR=\fPbool
Unlink job files when done. Default: false.
If true, exit the job on the first observed verification failure. Default:
false.
.TP
+.BI verify_async \fR=\fPint
+Fio will normally verify IO inline from the submitting thread. This option
+takes an integer describing how many async offload threads to create for IO
+verification instead, causing fio to offload the duty of verifying IO contents
+to one or more separate threads. If using this offload option, even sync IO
+engines can benefit from using an \fBiodepth\fR setting higher than 1, as it
+allows them to have IO in flight while verifies are running.
+.TP
+.BI verify_async_cpus \fR=\fPstr
+Tell fio to set the given CPU affinity on the async IO verification threads.
+See \fBcpus_allowed\fP for the format used.
+.TP
.B stonewall
Wait for preceeding jobs in the job file to exit before starting this one.
\fBstonewall\fR implies \fBnew_group\fR.
entering the kernel with a gettimeofday() call. The CPU set aside for doing
these time calls will be excluded from other uses. Fio will manually clear it
from the CPU mask of other jobs.
+.TP
+.BI continue_on_error \fR=\fPbool
+Normally fio will exit the job on the first observed failure. If this option is
+set, fio will continue the job when there is a 'non-fatal error'
+(\fBEIO\fR or \fBEILSEQ\fR) until the runtime is exceeded or the I/O size
+specified is completed. If this option is used, there are two more stats that
+are appended, the total error count and the first error. The error field given
+in the stats is the first error that was hit during the run.
.SH OUTPUT
While running, \fBfio\fR will display the status of the created jobs. For
example:
.P
Read status:
.RS
-.B KiB I/O, bandwidth \fR(KiB/s)\fP, runtime \fR(ms)\fP
+.B KB I/O, bandwidth \fR(KB/s)\fP, runtime \fR(ms)\fP
.P
Submission latency:
.RS
.P
Write status:
.RS
-.B KiB I/O, bandwidth \fR(KiB/s)\fP, runtime \fR(ms)\fP
+.B KB I/O, bandwidth \fR(KB/s)\fP, runtime \fR(ms)\fP
.P
Submission latency:
.RS
projects / fio.git / blobdiff