-.TH fio 1 "September 2007" "User Manual"
+.TH fio 1 "October 2013" "User Manual"
.SH NAME
fio \- flexible I/O tester
.SH SYNOPSIS
.B \-\-help
Display usage information and exit.
.TP
+.B \-\-cpuclock-test
+Perform test and validation of internal CPU clock
+.TP
+.BI \-\-crctest[\fR=\fPtest]
+Test the speed of the builtin checksumming functions. If no argument is given,
+all of them are tested. Or a comma separated list can be passed, in which
+case the given ones are tested.
+.TP
.BI \-\-cmdhelp \fR=\fPcommand
Print help information for \fIcommand\fR. May be `all' for all commands.
.TP
SI integer: a whole number, possibly containing a suffix denoting the base unit
of the value. Accepted suffixes are `k', 'M', 'G', 'T', and 'P', denoting
kilo (1024), mega (1024^2), giga (1024^3), tera (1024^4), and peta (1024^5)
-respectively. The suffix is not case sensitive. If prefixed with '0x', the
-value is assumed to be base 16 (hexadecimal). A suffix may include a trailing 'b',
-for instance 'kb' is identical to 'k'. You can specify a base 10 value
-by using 'KiB', 'MiB', 'GiB', etc. This is useful for disk drives where
-values are often given in base 10 values. Specifying '30GiB' will get you
-30*1000^3 bytes.
+respectively. If prefixed with '0x', the value is assumed to be base 16
+(hexadecimal). A suffix may include a trailing 'b', for instance 'kb' is
+identical to 'k'. You can specify a base 10 value by using 'KiB', 'MiB','GiB',
+etc. This is useful for disk drives where values are often given in base 10
+values. Specifying '30GiB' will get you 30*1000^3 bytes.
+When specifying times the default suffix meaning changes, still denoting the
+base unit of the value, but accepted suffixes are 'D' (days), 'H' (hours), 'M'
+(minutes), 'S' Seconds, 'ms' milli seconds. Time values without a unit specify
+seconds.
+The suffixes are not case sensitive.
.TP
.I bool
Boolean: a true or false value. `0' denotes false, `1' denotes true.
set, the fio will sum the results and report them as "mixed" instead.
.TP
.BI randrepeat \fR=\fPbool
-Seed the random number generator in a predictable way so results are repeatable
-across runs. Default: true.
+Seed the random number generator used for random I/O patterns in a predictable
+way so the pattern is repeatable across runs. Default: true.
+.TP
+.BI allrandrepeat \fR=\fPbool
+Seed all random number generators in a predictable way so results are
+repeatable across runs. Default: false.
+.TP
+.BI randseed \fR=\fPint
+Seed the random number generators based on this seed value, to be able to
+control what sequence of output is being generated. If not set, the random
+sequence depends on the \fBrandrepeat\fR setting.
.TP
.BI use_os_rand \fR=\fPbool
Fio can either use the random generator supplied by the OS to generator random
the remaining zeroed. With this set to some chunk size smaller than the block
size, fio can alternate random and zeroed data throughout the IO buffer.
.TP
+.BI buffer_pattern \fR=\fPstr
+If set, fio will fill the io buffers with this pattern. If not set, the contents
+of io buffers is defined by the other options related to buffer contents. The
+setting can be any pattern of bytes, and can be prefixed with 0x for hex
+values.
+.TP
.BI nrfiles \fR=\fPint
Number of files to use for this job. Default: 1.
.TP
.B e4defrag
IO engine that does regular EXT4_IOC_MOVE_EXT ioctls to simulate defragment activity
request to DDIR_WRITE event
+.TP
+.B rbd
+IO engine supporting direct access to Ceph Rados Block Devices (RBD) via librbd
+without the need to use the kernel rbd driver. This ioengine defines engine specific
+options.
.RE
.P
.RE
.BI direct \fR=\fPbool
If true, use non-buffered I/O (usually O_DIRECT). Default: false.
.TP
+.BI atomic \fR=\fPbool
+If value is true, attempt to use atomic direct IO. Atomic writes are guaranteed
+to be stable once acknowledged by the operating system. Only Linux supports
+O_ATOMIC right now.
+.TP
.BI buffered \fR=\fPbool
If true, use buffered I/O. This is the opposite of the \fBdirect\fR parameter.
Default: true.
Average bandwidth for \fBrate\fR and \fBratemin\fR over this number of
milliseconds. Default: 1000ms.
.TP
+.BI latency_target \fR=\fPint
+If set, fio will attempt to find the max performance point that the given
+workload will run at while maintaining a latency below this target. The
+values is given in microseconds. See \fBlatency_window\fR and
+\fBlatency_percentile\fR.
+.TP
+.BI latency_window \fR=\fPint
+Used with \fBlatency_target\fR to specify the sample window that the job
+is run at varying queue depths to test the performance. The value is given
+in microseconds.
+.TP
+.BI latency_percentile \fR=\fPfloat
+The percentage of IOs that must fall within the criteria specified by
+\fBlatency_target\fR and \fBlatency_window\fR. If not set, this defaults
+to 100.0, meaning that all IOs must be equal or below to the value set
+by \fBlatency_target\fR.
+.TP
.BI max_latency \fR=\fPint
If set, fio will exit the job if it exceeds this maximum latency. It will exit
with an ETIME error.
Specifies the number of iterations (runs of the same workload) of this job.
Default: 1.
.TP
+.BI verify_only \fR=\fPbool
+Do not perform the specified workload, only verify data still matches previous
+invocation of this workload. This option allows one to check data multiple
+times at a later date without overwriting it. This option makes sense only for
+workloads that write data, and does not support workloads with the
+\fBtime_based\fR option set.
+.TP
.BI do_verify \fR=\fPbool
Run the verify phase after a write phase. Only valid if \fBverify\fR is set.
Default: true.
.B tcp
Transmission control protocol
.TP
+.B tcpv6
+Transmission control protocol V6
+.TP
.B udp
User datagram protocol
.TP
+.B udpv6
+User datagram protocol V6
+.TP
.B unix
UNIX domain socket
.RE
.BI 1:
allocate space immediately inside defragment event, and free right after event
.RE
+.TP
+.BI (rbd)rbdname \fR=\fPstr
+Specifies the name of the RBD.
+.TP
+.BI (rbd)pool \fR=\fPstr
+Specifies the name of the Ceph pool containing the RBD.
+.TP
+.BI (rbd)clientname \fR=\fPstr
+Specifies the username (without the 'client.' prefix) used to access the Ceph cluster.
.SH OUTPUT
While running, \fBfio\fR will display the status of the created jobs. For
example:
projects / fio.git / blobdiff