Write output to \fIfilename\fR.
.TP
.BI \-\-output-format \fR=\fPformat
-Set the reporting format to \fInormal\fR, \fIterse\fR, or \fIjosn\fR.
+Set the reporting format to \fInormal\fR, \fIterse\fR, \fIjson\fR, or
+\fIjson+\fR. Multiple formats can be selected, separate by a comma. \fIterse\fR
+is a CSV based format. \fIjson+\fR is like \fIjson\fR, except it adds a full
+dump of the latency buckets.
.TP
.BI \-\-runtime \fR=\fPruntime
Limit run time to \fIruntime\fR seconds.
.TP
.B \-\-append-terse
Print statistics in selected mode AND terse, semicolon-delimited format.
+Deprecated, use \-\-output-format instead to select multiple formats.
.TP
.B \-\-version
Display version information and exit.
Background a fio server, writing the pid to the given pid file.
.TP
.BI \-\-client \fR=\fPhost
-Instead of running the jobs locally, send and run them on the given host.
+Instead of running the jobs locally, send and run them on the given host or set of hosts. See client/server section.
.TP
.BI \-\-idle\-prof \fR=\fPoption
Report cpu idleness on a system or percpu basis (\fIoption\fP=system,percpu) or run unit work calibration only (\fIoption\fP=calibrate).
May be used to override the job name. On the command line, this parameter
has the special purpose of signalling the start of a new job.
.TP
+.BI wait_for \fR=\fPstr
+Specifies the name of the already defined job to wait for. Single waitee name
+only may be specified. If set, the job won't be started until all workers of
+the waitee job are done. Wait_for operates on the job name basis, so there are
+a few limitations. First, the waitee must be defined prior to the waiter job
+(meaning no forward references). Second, if a job is being referenced as a
+waitee, it must have a unique name (no duplicate waitees).
+.TP
.BI description \fR=\fPstr
Human-readable description of the job. It is printed when the job is run, but
otherwise has no special purpose.
.B rw, readwrite
Mixed sequential reads and writes.
.TP
-.B randrw
+.B randrw
Mixed random reads and writes.
+.TP
+.B trimwrite
+Trim and write mixed workload. Blocks will be trimmed first, then the same
+blocks will be written to.
.RE
.P
For mixed I/O, the default split is 50/50. For certain types of io the result
Use \fBposix_fadvise\fR\|(2) to advise the kernel what I/O patterns
are likely to be issued. Default: true.
.TP
+.BI fadvise_stream \fR=\fPint
+Use \fBposix_fadvise\fR\|(2) to advise the kernel what stream ID the
+writes issued belong to. Only supported on Linux. Note, this option
+may change going forward.
+.TP
.BI size \fR=\fPint
Total size of I/O for this job. \fBfio\fR will run until this many bytes have
been transferred, unless limited by other options (\fBruntime\fR, for instance,
.TP
.B zero_buffers
Initialize buffers with all zeros. Default: fill buffers with random data.
-The resulting IO buffers will not be completely zeroed, unless
-\fPscramble_buffers\fR is also turned off.
.TP
.B refill_buffers
If this option is given, fio will refill the IO buffers on every submit. The
of IO buffers is defined by the other options related to buffer contents. The
setting can be any pattern of bytes, and can be prefixed with 0x for hex
values. It may also be a string, where the string must then be wrapped with
-"".
+"", e.g.:
+.RS
+.RS
+\fBbuffer_pattern\fR="abcd"
+.RS
+or
+.RE
+\fBbuffer_pattern\fR=-12
+.RS
+or
+.RE
+\fBbuffer_pattern\fR=0xdeadface
+.RE
+.LP
+Also you can combine everything together in any order:
+.LP
+.RS
+\fBbuffer_pattern\fR=0xdeadface"abcd"-12
+.RE
+.RE
.TP
.BI dedupe_percentage \fR=\fPint
If set, fio will generate this percentage of identical buffers when writing.
.TP
.B sequential
Do each file in the set sequentially.
+.TP
+.B zipf
+Use a zipfian distribution to decide what file to access.
+.TP
+.B pareto
+Use a pareto distribution to decide what file to access.
+.TP
+.B gauss
+Use a gaussian (normal) distribution to decide what file to access.
.RE
.P
-The number of I/Os to issue before switching to a new file can be specified by
-appending `:\fIint\fR' to the service type.
+For \fBrandom\fR, \fBroundrobin\fR, and \fBsequential\fR, a postfix can be
+appended to tell fio how many I/Os to issue before switching to a new file.
+For example, specifying \fBfile_service_type=random:8\fR would cause fio to
+issue \fI8\fR I/Os before selecting a new file at random. For the non-uniform
+distributions, a floating point postfix can be given to influence how the
+distribution is skewed. See \fBrandom_distribution\fR for a description of how
+that would work.
.RE
.TP
.BI ioengine \fR=\fPstr
.B pvsync
Basic \fBpreadv\fR\|(2) or \fBpwritev\fR\|(2) I/O.
.TP
+.B pvsync2
+Basic \fBpreadv2\fR\|(2) or \fBpwritev2\fR\|(2) I/O.
+.TP
.B libaio
Linux native asynchronous I/O. This ioengine defines engine specific options.
.TP
request to DDIR_WRITE event
.TP
.B rbd
-IO engine supporting direct access to Ceph Rados Block Devices (RBD) via librbd
-without the need to use the kernel rbd driver. This ioengine defines engine specific
+IO engine supporting direct access to Ceph Rados Block Devices (RBD) via librbd
+without the need to use the kernel rbd driver. This ioengine defines engine specific
options.
.TP
.B gfapi
example job file to create such files, use rw=write option). Please note, you
might want to set necessary environment variables to work with hdfs/libhdfs
properly.
+.TP
+.B mtd
+Read, write and erase an MTD character device (e.g., /dev/mtd0). Discards are
+treated as erases. Depending on the underlying device type, the I/O may have
+to go in a certain pattern, e.g., on NAND, writing sequentially to erase blocks
+and discarding before overwriting. The writetrim mode works well for this
+constraint.
+.TP
+.B pmemblk
+Read and write through the NVML libpmemblk interface.
.RE
.P
.RE
not async on that OS. Keep an eye on the IO depth distribution in the
fio output to verify that the achieved depth is as expected. Default: 1.
.TP
-.BI iodepth_batch \fR=\fPint
-Number of I/Os to submit at once. Default: \fBiodepth\fR.
+.BI iodepth_batch \fR=\fPint "\fR,\fP iodepth_batch_submit" \fR=\fPint
+This defines how many pieces of IO to submit at once. It defaults to 1
+which means that we submit each IO as soon as it is available, but can
+be raised to submit bigger batches of IO at the time. If it is set to 0
+the \fBiodepth\fR value will be used.
.TP
-.BI iodepth_batch_complete \fR=\fPint
+.BI iodepth_batch_complete_min \fR=\fPint "\fR,\fP iodepth_batch_complete" \fR=\fPint
This defines how many pieces of IO to retrieve at once. It defaults to 1 which
means that we'll ask for a minimum of 1 IO in the retrieval process from the
kernel. The IO retrieval will go on until we hit the limit set by
completed events before queuing more IO. This helps reduce IO latency, at the
cost of more retrieval system calls.
.TP
+.BI iodepth_batch_complete_max \fR=\fPint
+This defines maximum pieces of IO to
+retrieve at once. This variable should be used along with
+\fBiodepth_batch_complete_min\fR=int variable, specifying the range
+of min and max amount of IO which should be retrieved. By default
+it is equal to \fBiodepth_batch_complete_min\fR value.
+
+Example #1:
+.RS
+.RS
+\fBiodepth_batch_complete_min\fR=1
+.LP
+\fBiodepth_batch_complete_max\fR=<iodepth>
+.RE
+
+which means that we will retrieve at leat 1 IO and up to the
+whole submitted queue depth. If none of IO has been completed
+yet, we will wait.
+
+Example #2:
+.RS
+\fBiodepth_batch_complete_min\fR=0
+.LP
+\fBiodepth_batch_complete_max\fR=<iodepth>
+.RE
+
+which means that we can retrieve up to the whole submitted
+queue depth, but if none of IO has been completed yet, we will
+NOT wait and immediately exit the system call. In this example
+we simply do polling.
+.RE
+.TP
.BI iodepth_low \fR=\fPint
Low watermark indicating when to start filling the queue again. Default:
-\fBiodepth\fR.
+\fBiodepth\fR.
+.TP
+.BI io_submit_mode \fR=\fPstr
+This option controls how fio submits the IO to the IO engine. The default is
+\fBinline\fR, which means that the fio job threads submit and reap IO directly.
+If set to \fBoffload\fR, the job threads will offload IO submission to a
+dedicated pool of IO threads. This requires some coordination and thus has a
+bit of extra overhead, especially for lower queue depth IO where it can
+increase latencies. The benefit is that fio can manage submission rates
+independently of the device completion rates. This avoids skewed latency
+reporting if IO gets back up on the device side (the coordinated omission
+problem).
.TP
.BI direct \fR=\fPbool
If true, use non-buffered I/O (usually O_DIRECT). Default: false.
.B pareto
Pareto distribution
.TP
+.B gauss
+Normal (gaussian) distribution
+.TP
+.B zoned
+Zoned random distribution
+.TP
.RE
-.P
-When using a zipf or pareto distribution, an input value is also needed to
-define the access pattern. For zipf, this is the zipf theta. For pareto,
-it's the pareto power. Fio includes a test program, genzipf, that can be
-used visualize what the given input values will yield in terms of hit rates.
-If you wanted to use zipf with a theta of 1.2, you would use
+When using a \fBzipf\fR or \fBpareto\fR distribution, an input value is also
+needed to define the access pattern. For \fBzipf\fR, this is the zipf theta.
+For \fBpareto\fR, it's the pareto power. Fio includes a test program, genzipf,
+that can be used visualize what the given input values will yield in terms of
+hit rates. If you wanted to use \fBzipf\fR with a theta of 1.2, you would use
random_distribution=zipf:1.2 as the option. If a non-uniform model is used,
-fio will disable use of the random map.
+fio will disable use of the random map. For the \fBgauss\fR distribution, a
+normal deviation is supplied as a value between 0 and 100.
+.P
+.RS
+For a \fBzoned\fR distribution, fio supports specifying percentages of IO
+access that should fall within what range of the file or device. For example,
+given a criteria of:
+.P
+.RS
+60% of accesses should be to the first 10%
+.RE
+.RS
+30% of accesses should be to the next 20%
+.RE
+.RS
+8% of accesses should be to to the next 30%
+.RE
+.RS
+2% of accesses should be to the next 40%
+.RE
+.P
+we can define that through zoning of the random accesses. For the above
+example, the user would do:
+.P
+.RS
+.B random_distribution=zoned:60/10:30/20:8/30:2/40
+.RE
+.P
+similarly to how \fBbssplit\fR works for setting ranges and percentages of block
+sizes. Like \fBbssplit\fR, it's possible to specify separate zones for reads,
+writes, and trims. If just one set is given, it'll apply to all of them.
+.RE
.TP
.BI percentage_random \fR=\fPint
For a random workload, set how big a percentage should be random. This defaults
.B lfsr
Linear feedback shift register generator
.TP
+.B tausworthe64
+Strong 64-bit 2^258 cycle random number generator
+.TP
.RE
.P
Tausworthe is a strong random number generator, but it requires tracking on the
computationally expensive. It's not a true random generator, however, though
for IO purposes it's typically good enough. LFSR only works with single block
sizes, not with workloads that use multiple block sizes. If used with such a
-workload, fio may read or write some blocks multiple times.
+workload, fio may read or write some blocks multiple times. The default
+value is tausworthe, unless the required space exceeds 2^32 blocks. If it does,
+then tausworthe64 is selected automatically.
.TP
.BI nice \fR=\fPint
Run job with given nice value. See \fBnice\fR\|(2).
can be done with \fBrate\fR=,500k or \fBrate\fR=500k,. The former will only
limit writes (to 500KB/sec), the latter will only limit reads.
.TP
-.BI ratemin \fR=\fPint
+.BI rate_min \fR=\fPint
Tell \fBfio\fR to do whatever it can to maintain at least the given bandwidth.
Failing to meet this requirement will cause the job to exit. The same format
as \fBrate\fR is used for read vs write separation.
If this rate of I/O is not met, the job will exit. The same format as \fBrate\fR
is used for read vs write separation.
.TP
-.BI ratecycle \fR=\fPint
-Average bandwidth for \fBrate\fR and \fBratemin\fR over this number of
+.BI rate_process \fR=\fPstr
+This option controls how fio manages rated IO submissions. The default is
+\fBlinear\fR, which submits IO in a linear fashion with fixed delays between
+IOs that gets adjusted based on IO completion rates. If this is set to
+\fBpoisson\fR, fio will submit IO based on a more real world random request
+flow, known as the Poisson process
+(https://en.wikipedia.org/wiki/Poisson_process). The lambda will be
+10^6 / IOPS for the given workload.
+.TP
+.BI rate_cycle \fR=\fPint
+Average bandwidth for \fBrate\fR and \fBrate_min\fR over this number of
milliseconds. Default: 1000ms.
.TP
.BI latency_target \fR=\fPint
.TP
.B mmaphuge
Same as \fBmmap\fR, but use huge files as backing.
+.TP
+.B mmapshared
+Same as \fBmmap\fR, but use a MMAP_SHARED mapping.
.RE
.P
The amount of memory allocated is the maximum allowed \fBblocksize\fR for the
.B exitall
Terminate all jobs when one finishes. Default: wait for each job to finish.
.TP
+.B exitall_on_error \fR=\fPbool
+Terminate all jobs if one job finishes in error. Default: wait for each job
+to finish.
+.TP
.BI bwavgtime \fR=\fPint
-Average bandwidth calculations over the given time in milliseconds. Default:
-500ms.
+Average bandwidth calculations over the given time in milliseconds. If the job
+also does bandwidth logging through \fBwrite_bw_log\fR, then the minimum of
+this option and \fBlog_avg_msec\fR will be used. Default: 500ms.
.TP
.BI iopsavgtime \fR=\fPint
-Average IOPS calculations over the given time in milliseconds. Default:
-500ms.
+Average IOPS calculations over the given time in milliseconds. If the job
+also does IOPS logging through \fBwrite_iops_log\fR, then the minimum of
+this option and \fBlog_avg_msec\fR will be used. Default: 500ms.
.TP
.BI create_serialize \fR=\fPbool
If true, serialize file creation for the jobs. Default: true.
laid out or updated on disk, only that will be done. The actual job contents
are not executed.
.TP
+.BI allow_file_create \fR=\fPbool
+If true, fio is permitted to create files as part of its workload. This is
+the default behavior. If this option is false, then fio will error out if the
+files it needs to use don't already exist. Default: true.
+.TP
+.BI allow_mounted_write \fR=\fPbool
+If this isn't set, fio will abort jobs that are destructive (eg that write)
+to what appears to be a mounted device or partition. This should help catch
+creating inadvertently destructive tests, not realizing that the test will
+destroy data on the mounted file system. Default: false.
+.TP
.BI pre_read \fR=\fPbool
If this is given, files will be pre-read into memory before starting the given
IO operation. This will also clear the \fR \fBinvalidate\fR flag, since it is
Default: true.
.TP
.BI verify \fR=\fPstr
-Method of verifying file contents after each iteration of the job. Allowed
-values are:
+Method of verifying file contents after each iteration of the job. Each
+verification method also implies verification of special header, which is
+written to the beginning of each block. This header also includes meta
+information, like offset of the block, block number, timestamp when block
+was written, etc. \fBverify\fR=str can be combined with \fBverify_pattern\fR=str
+option. The allowed values are:
.RS
.RS
.TP
not supported by the system.
.TP
.B meta
-Write extra information about each I/O (timestamp, block number, etc.). The
-block number is verified. See \fBverify_pattern\fR as well.
+This option is deprecated, since now meta information is included in generic
+verification header and meta verification happens by default. For detailed
+information see the description of the \fBverify\fR=str setting. This option
+is kept because of compatibility's sake with old configurations. Do not use it.
+.TP
+.B pattern
+Verify a strict pattern. Normally fio includes a header with some basic
+information and checksumming, but if this option is set, only the
+specific pattern set with \fBverify_pattern\fR is verified.
.TP
.B null
Pretend to verify. Used for testing internals.
fio will fill 1/2/3/4 bytes of the buffer at the time(it can be either a
decimal or a hex number). The verify_pattern if larger than a 32-bit quantity
has to be a hex number that starts with either "0x" or "0X". Use with
-\fBverify\fP=meta.
+\fBverify\fP=str. Also, verify_pattern supports %o format, which means that for
+each block offset will be written and then verifyied back, e.g.:
+.RS
+.RS
+\fBverify_pattern\fR=%o
+.RE
+Or use combination of everything:
+.LP
+.RS
+\fBverify_pattern\fR=0xff%o"abcd"-21
+.RE
+.RE
.TP
.BI verify_fatal \fR=\fPbool
If true, exit the job on the first observed verification failure. Default:
.BI verify_backlog_batch \fR=\fPint
Control how many blocks fio will verify if verify_backlog is set. If not set,
will default to the value of \fBverify_backlog\fR (meaning the entire queue is
-read back and verified). If \fBverify_backlog_batch\fR is less than
-\fBverify_backlog\fR then not all blocks will be verified, if
+read back and verified). If \fBverify_backlog_batch\fR is less than
+\fBverify_backlog\fR then not all blocks will be verified, if
\fBverify_backlog_batch\fR is larger than \fBverify_backlog\fR, some blocks
will be verified more than once.
.TP
of the same reporting group, unless separated by a stonewall.
.TP
.BI numjobs \fR=\fPint
-Number of clones (processes/threads performing the same workload) of this job.
+Number of clones (processes/threads performing the same workload) of this job.
Default: 1.
.TP
.B group_reporting
from. Setting \fBreplay_redirect\fR causes all IOPS to be replayed onto the
single specified device regardless of the device it was recorded from.
.TP
+.BI replay_align \fR=\fPint
+Force alignment of IO offsets and lengths in a trace to this power of 2 value.
+.TP
+.BI replay_scale \fR=\fPint
+Scale sector offsets down by this factor when replaying traces.
+.TP
+.BI per_job_logs \fR=\fPbool
+If set, this generates bw/clat/iops log with per file private filenames. If
+not set, jobs with identical names will share the log filename. Default: true.
+.TP
.BI write_bw_log \fR=\fPstr
If given, write a bandwidth log of the jobs in this job file. Can be used to
store data of the bandwidth of the jobs in their lifetime. The included
fio_generate_plots script uses gnuplot to turn these text files into nice
graphs. See \fBwrite_lat_log\fR for behaviour of given filename. For this
option, the postfix is _bw.x.log, where x is the index of the job (1..N,
-where N is the number of jobs)
+where N is the number of jobs). If \fBper_job_logs\fR is false, then the
+filename will not include the job index. See the \fBLOG FILE FORMATS\fR
+section.
.TP
.BI write_lat_log \fR=\fPstr
Same as \fBwrite_bw_log\fR, but writes I/O completion latencies. If no
filename is given with this option, the default filename of
"jobname_type.x.log" is used, where x is the index of the job (1..N, where
N is the number of jobs). Even if the filename is given, fio will still
-append the type of log.
+append the type of log. If \fBper_job_logs\fR is false, then the filename will
+not include the job index. See the \fBLOG FILE FORMATS\fR section.
.TP
.BI write_iops_log \fR=\fPstr
Same as \fBwrite_bw_log\fR, but writes IOPS. If no filename is given with this
option, the default filename of "jobname_type.x.log" is used, where x is the
index of the job (1..N, where N is the number of jobs). Even if the filename
-is given, fio will still append the type of log.
+is given, fio will still append the type of log. If \fBper_job_logs\fR is false,
+then the filename will not include the job index. See the \fBLOG FILE FORMATS\fR
+section.
.TP
.BI log_avg_msec \fR=\fPint
By default, fio will log an entry in the iops, latency, or bw log for every
IO that completes. When writing to the disk log, that can quickly grow to a
very large size. Setting this option makes fio average the each log entry
-over the specified period of time, reducing the resolution of the log.
-Defaults to 0.
+over the specified period of time, reducing the resolution of the log. See
+\fBlog_max_value\fR as well. Defaults to 0, logging all entries.
+.TP
+.BI log_max_value \fR=\fPbool
+If \fBlog_avg_msec\fR is set, fio logs the average over that window. If you
+instead want to log the maximum value, set this option to 1. Defaults to
+0, meaning that averaged values are logged.
.TP
.BI log_offset \fR=\fPbool
If this is set, the iolog options will include the byte offset for the IO
normally at the end of a run, by decompressing the chunks and storing them
in the specified log file. This feature depends on the availability of zlib.
.TP
+.BI log_compression_cpus \fR=\fPstr
+Define the set of CPUs that are allowed to handle online log compression
+for the IO jobs. This can provide better isolation between performance
+sensitive jobs, and background compression work.
+.TP
.BI log_store_compressed \fR=\fPbool
-If set, and \fBlog\fR_compression is also set, fio will store the log files in
-a compressed format. They can be decompressed with fio, using the
-\fB\-\-inflate-log\fR command line parameter. The files will be stored with a
-\fB\.fz\fR suffix.
+If set, fio will store the log files in a compressed format. They can be
+decompressed with fio, using the \fB\-\-inflate-log\fR command line parameter.
+The files will be stored with a \fB\.fz\fR suffix.
+.TP
+.BI block_error_percentiles \fR=\fPbool
+If set, record errors in trim block-sized units from writes and trims and output
+a histogram of how many trims it took to get to errors, and what kind of error
+was encountered.
.TP
.BI disable_lat \fR=\fPbool
Disable measurements of total latency numbers. Useful only for cutting
Error may be symbol ('ENOSPC', 'ENOMEM') or an integer.
.br
Example: ignore_error=EAGAIN,ENOSPC:122 .
-.br
-This option will ignore EAGAIN from READ, and ENOSPC and 122(EDQUOT) from WRITE.
+.br
+This option will ignore EAGAIN from READ, and ENOSPC and 122(EDQUOT) from WRITE.
.TP
.BI error_dump \fR=\fPbool
If set dump every error even if it is non fatal, true by default. If disabled
Enable the reporting of percentiles of completion latencies.
.TP
.BI percentile_list \fR=\fPfloat_list
-Overwrite the default list of percentiles for completion
-latencies. Each number is a floating number in the range (0,100], and
-the maximum length of the list is 20. Use ':' to separate the
+Overwrite the default list of percentiles for completion latencies and the
+block error histogram. Each number is a floating number in the range (0,100],
+and the maximum length of the list is 20. Use ':' to separate the
numbers. For example, \-\-percentile_list=99.5:99.9 will cause fio to
report the values of completion latency below which 99.5% and 99.9% of
the observed latencies fell, respectively.
enabled when polling for a minimum of 0 events (eg when
iodepth_batch_complete=0).
.TP
+.BI (psyncv2)hipri
+Set RWF_HIPRI on IO, indicating to the kernel that it's of
+higher priority than normal.
+.TP
.BI (net,netsplice)hostname \fR=\fPstr
The host name or IP address to use for TCP or UDP based IO.
If the job is a TCP listener or UDP reader, the hostname is not
File will be used as a block donor (swap extents between files)
.TP
.BI (e4defrag,inplace) \fR=\fPint
-Configure donor file block allocation strategy
+Configure donor file block allocation strategy
.RS
.BI 0(default) :
Preallocate donor's file on init
.BI 1:
allocate space immediately inside defragment event, and free right after event
.RE
+.TP
+.BI (rbd)clustername \fR=\fPstr
+Specifies the name of the ceph cluster.
.TP
.BI (rbd)rbdname \fR=\fPstr
Specifies the name of the RBD.
Specifies the name of the Ceph pool containing the RBD.
.TP
.BI (rbd)clientname \fR=\fPstr
-Specifies the username (without the 'client.' prefix) used to access the Ceph cluster.
+Specifies the username (without the 'client.' prefix) used to access the Ceph
+cluster. If the clustername is specified, the clientname shall be the full
+type.id string. If no type. prefix is given, fio will add 'client.' by default.
+.TP
+.BI (mtd)skipbad \fR=\fPbool
+Skip operations against known bad blocks.
.SH OUTPUT
While running, \fBfio\fR will display the status of the created jobs. For
example:
.TP
.B cpu
CPU usage statistics. Includes user and system time, number of context switches
-this thread went through and number of major and minor page faults.
+this thread went through and number of major and minor page faults. The CPU
+utilization numbers are averages for the jobs in that reporting group, while
+the context and fault counters are summed.
.TP
.B IO depths
Distribution of I/O depths. Each depth includes everything less than (or equal)
.P
Error Info (dependent on continue_on_error, default off):
.RS
-.B total # errors, first error code
+.B total # errors, first error code
.RE
.P
.B text description (if provided in config - appears on newline)
.RE
+.SH TRACE FILE FORMAT
+There are two trace file format that you can encounter. The older (v1) format
+is unsupported since version 1.20-rc3 (March 2008). It will still be described
+below in case that you get an old trace and want to understand it.
+
+In any case the trace is a simple text file with a single action per line.
+
+.P
+.B Trace file format v1
+.RS
+Each line represents a single io action in the following format:
+
+rw, offset, length
+
+where rw=0/1 for read/write, and the offset and length entries being in bytes.
+
+This format is not supported in Fio versions => 1.20-rc3.
+
+.RE
+.P
+.B Trace file format v2
+.RS
+The second version of the trace file format was added in Fio version 1.17.
+It allows to access more then one file per trace and has a bigger set of
+possible file actions.
+
+The first line of the trace file has to be:
+
+\fBfio version 2 iolog\fR
+
+Following this can be lines in two different formats, which are described below.
+The file management format:
+
+\fBfilename action\fR
+
+The filename is given as an absolute path. The action can be one of these:
+
+.P
+.PD 0
+.RS
+.TP
+.B add
+Add the given filename to the trace
+.TP
+.B open
+Open the file with the given filename. The filename has to have been previously
+added with the \fBadd\fR action.
+.TP
+.B close
+Close the file with the given filename. The file must have previously been
+opened.
+.RE
+.PD
+.P
+
+The file io action format:
+
+\fBfilename action offset length\fR
+
+The filename is given as an absolute path, and has to have been added and opened
+before it can be used with this format. The offset and length are given in
+bytes. The action can be one of these:
+
+.P
+.PD 0
+.RS
+.TP
+.B wait
+Wait for 'offset' microseconds. Everything below 100 is discarded. The time is
+relative to the previous wait statement.
+.TP
+.B read
+Read \fBlength\fR bytes beginning from \fBoffset\fR
+.TP
+.B write
+Write \fBlength\fR bytes beginning from \fBoffset\fR
+.TP
+.B sync
+fsync() the file
+.TP
+.B datasync
+fdatasync() the file
+.TP
+.B trim
+trim the given file from the given \fBoffset\fR for \fBlength\fR bytes
+.RE
+.PD
+.P
+
+.SH CPU IDLENESS PROFILING
+In some cases, we want to understand CPU overhead in a test. For example,
+we test patches for the specific goodness of whether they reduce CPU usage.
+fio implements a balloon approach to create a thread per CPU that runs at
+idle priority, meaning that it only runs when nobody else needs the cpu.
+By measuring the amount of work completed by the thread, idleness of each
+CPU can be derived accordingly.
+
+An unit work is defined as touching a full page of unsigned characters. Mean
+and standard deviation of time to complete an unit work is reported in "unit
+work" section. Options can be chosen to report detailed percpu idleness or
+overall system idleness by aggregating percpu stats.
+
+.SH VERIFICATION AND TRIGGERS
+Fio is usually run in one of two ways, when data verification is done. The
+first is a normal write job of some sort with verify enabled. When the
+write phase has completed, fio switches to reads and verifies everything
+it wrote. The second model is running just the write phase, and then later
+on running the same job (but with reads instead of writes) to repeat the
+same IO patterns and verify the contents. Both of these methods depend
+on the write phase being completed, as fio otherwise has no idea how much
+data was written.
+
+With verification triggers, fio supports dumping the current write state
+to local files. Then a subsequent read verify workload can load this state
+and know exactly where to stop. This is useful for testing cases where
+power is cut to a server in a managed fashion, for instance.
+
+A verification trigger consists of two things:
+
+.RS
+Storing the write state of each job
+.LP
+Executing a trigger command
+.RE
+
+The write state is relatively small, on the order of hundreds of bytes
+to single kilobytes. It contains information on the number of completions
+done, the last X completions, etc.
+
+A trigger is invoked either through creation (\fBtouch\fR) of a specified
+file in the system, or through a timeout setting. If fio is run with
+\fB\-\-trigger\-file=/tmp/trigger-file\fR, then it will continually check for
+the existence of /tmp/trigger-file. When it sees this file, it will
+fire off the trigger (thus saving state, and executing the trigger
+command).
+
+For client/server runs, there's both a local and remote trigger. If
+fio is running as a server backend, it will send the job states back
+to the client for safe storage, then execute the remote trigger, if
+specified. If a local trigger is specified, the server will still send
+back the write state, but the client will then execute the trigger.
+
+.RE
+.P
+.B Verification trigger example
+.RS
+
+Lets say we want to run a powercut test on the remote machine 'server'.
+Our write workload is in write-test.fio. We want to cut power to 'server'
+at some point during the run, and we'll run this test from the safety
+or our local machine, 'localbox'. On the server, we'll start the fio
+backend normally:
+
+server# \fBfio \-\-server\fR
+
+and on the client, we'll fire off the workload:
+
+localbox$ \fBfio \-\-client=server \-\-trigger\-file=/tmp/my\-trigger \-\-trigger-remote="bash \-c "echo b > /proc/sysrq-triger""\fR
+
+We set \fB/tmp/my-trigger\fR as the trigger file, and we tell fio to execute
+
+\fBecho b > /proc/sysrq-trigger\fR
+
+on the server once it has received the trigger and sent us the write
+state. This will work, but it's not \fIreally\fR cutting power to the server,
+it's merely abruptly rebooting it. If we have a remote way of cutting
+power to the server through IPMI or similar, we could do that through
+a local trigger command instead. Lets assume we have a script that does
+IPMI reboot of a given hostname, ipmi-reboot. On localbox, we could
+then have run fio with a local trigger instead:
+
+localbox$ \fBfio \-\-client=server \-\-trigger\-file=/tmp/my\-trigger \-\-trigger="ipmi-reboot server"\fR
+
+For this case, fio would wait for the server to send us the write state,
+then execute 'ipmi-reboot server' when that happened.
+
+.RE
+.P
+.B Loading verify state
+.RS
+To load store write state, read verification job file must contain
+the verify_state_load option. If that is set, fio will load the previously
+stored state. For a local fio run this is done by loading the files directly,
+and on a client/server run, the server backend will ask the client to send
+the files over and load them from there.
+
+.RE
+
+.SH LOG FILE FORMATS
+
+Fio supports a variety of log file formats, for logging latencies, bandwidth,
+and IOPS. The logs share a common format, which looks like this:
+
+.B time (msec), value, data direction, offset
+
+Time for the log entry is always in milliseconds. The value logged depends
+on the type of log, it will be one of the following:
+
+.P
+.PD 0
+.TP
+.B Latency log
+Value is in latency in usecs
+.TP
+.B Bandwidth log
+Value is in KB/sec
+.TP
+.B IOPS log
+Value is in IOPS
+.PD
+.P
+
+Data direction is one of the following:
+
+.P
+.PD 0
+.TP
+.B 0
+IO is a READ
+.TP
+.B 1
+IO is a WRITE
+.TP
+.B 2
+IO is a TRIM
+.PD
+.P
+
+The \fIoffset\fR is the offset, in bytes, from the start of the file, for that
+particular IO. The logging of the offset can be toggled with \fBlog_offset\fR.
+
+If windowed logging is enabled though \fBlog_avg_msec\fR, then fio doesn't log
+individual IOs. Instead of logs the average values over the specified
+period of time. Since \fIdata direction\fR and \fIoffset\fR are per-IO values,
+they aren't applicable if windowed logging is enabled. If windowed logging
+is enabled and \fBlog_max_value\fR is set, then fio logs maximum values in
+that window instead of averages.
+
+.RE
+
.SH CLIENT / SERVER
Normally you would run fio as a stand-alone application on the machine
where the IO workload should be generated. However, it is also possible to
socket. 'hostname' is either a hostname or IP address, and 'port' is the port to
listen to (only valid for TCP/IP, not a local socket). Some examples:
-1) fio \-\-server
+1) \fBfio \-\-server\fR
Start a fio server, listening on all interfaces on the default port (8765).
-2) fio \-\-server=ip:hostname,4444
+2) \fBfio \-\-server=ip:hostname,4444\fR
Start a fio server, listening on IP belonging to hostname and on port 4444.
-3) fio \-\-server=ip6:::1,4444
+3) \fBfio \-\-server=ip6:::1,4444\fR
Start a fio server, listening on IPv6 localhost ::1 and on port 4444.
-4) fio \-\-server=,4444
+4) \fBfio \-\-server=,4444\fR
Start a fio server, listening on all interfaces on port 4444.
-5) fio \-\-server=1.2.3.4
+5) \fBfio \-\-server=1.2.3.4\fR
Start a fio server, listening on IP 1.2.3.4 on the default port.
-6) fio \-\-server=sock:/tmp/fio.sock
+6) \fBfio \-\-server=sock:/tmp/fio.sock\fR
Start a fio server, listening on the local socket /tmp/fio.sock.
When a server is running, you can connect to it from a client. The client
is run with:
-fio \-\-local-args \-\-client=server \-\-remote-args <job file(s)>
+\fBfio \-\-local-args \-\-client=server \-\-remote-args <job file(s)>\fR
where \-\-local-args are arguments that are local to the client where it is
running, 'server' is the connect string, and \-\-remote-args and <job file(s)>
does on the server side, to allow IP/hostname/socket and port strings.
You can connect to multiple clients as well, to do that you could run:
-fio \-\-client=server2 \-\-client=server2 <job file(s)>
+\fBfio \-\-client=server2 \-\-client=server2 <job file(s)>\fR
If the job file is located on the fio server, then you can tell the server
to load a local file as well. This is done by using \-\-remote-config:
-fio \-\-client=server \-\-remote-config /path/to/file.fio
+\fBfio \-\-client=server \-\-remote-config /path/to/file.fio\fR
-Then the fio serer will open this local (to the server) job file instead
+Then fio will open this local (to the server) job file instead
of being passed one from the client.
+
+If you have many servers (example: 100 VMs/containers), you can input a pathname
+of a file containing host IPs/names as the parameter value for the \-\-client option.
+For example, here is an example "host.list" file containing 2 hostnames:
+
+host1.your.dns.domain
+.br
+host2.your.dns.domain
+
+The fio command would then be:
+
+\fBfio \-\-client=host.list <job file>\fR
+
+In this mode, you cannot input server-specific parameters or job files, and all
+servers receive the same job file.
+
+In order to enable fio \-\-client runs utilizing a shared filesystem from multiple hosts,
+fio \-\-client now prepends the IP address of the server to the filename. For example,
+if fio is using directory /mnt/nfs/fio and is writing filename fileio.tmp,
+with a \-\-client hostfile
+containing two hostnames h1 and h2 with IP addresses 192.168.10.120 and 192.168.10.121, then
+fio will create two files:
+
+/mnt/nfs/fio/192.168.10.120.fileio.tmp
+.br
+/mnt/nfs/fio/192.168.10.121.fileio.tmp
+
.SH AUTHORS
.B fio
For further documentation see \fBHOWTO\fR and \fBREADME\fR.
.br
Sample jobfiles are available in the \fBexamples\fR directory.
-
projects / fio.git / blobdiff