Convert \fIjobfile\fR to a set of command\-line options.
.TP
.BI \-\-readonly
-Turn on safety read\-only checks, preventing writes. The \fB\-\-readonly\fR
+Turn on safety read\-only checks, preventing writes and trims. The \fB\-\-readonly\fR
option is an extra safety guard to prevent users from accidentally starting
-a write workload when that is not desired. Fio will only write if
-`rw=write/randwrite/rw/randrw' is given. This extra safety net can be used
-as an extra precaution as \fB\-\-readonly\fR will also enable a write check in
-the I/O engine core to prevent writes due to unknown user space bug(s).
+a write or trim workload when that is not desired. Fio will only modify the
+device under test if `rw=write/randwrite/rw/randrw/trim/randtrim/trimwrite'
+is given. This safety net can be used as an extra precaution.
.TP
.BI \-\-eta \fR=\fPwhen
Specifies when real\-time ETA estimate should be printed. \fIwhen\fR may
and that some blocks may be read/written more than once. If this option is
used with \fBverify\fR and multiple blocksizes (via \fBbsrange\fR),
only intact blocks are verified, i.e., partially\-overwritten blocks are
-ignored.
+ignored. With an async I/O engine and an I/O depth > 1, it is possible for
+the same block to be overwritten, which can cause verification errors. Either
+do not use norandommap in this case, or also use the lfsr random generator.
.TP
.BI softrandommap \fR=\fPbool
See \fBnorandommap\fR. If fio runs with the random block map enabled and
90% 4k writes and 10% 8k writes, you would specify:
.RS
.P
-bssplit=2k/50:4k/50,4k/90,8k/10
+bssplit=2k/50:4k/50,4k/90:8k/10
.RE
.P
Fio supports defining up to 64 different weights for each data direction.
.TP
.B pmemblk
Read and write using filesystem DAX to a file on a filesystem
-mounted with DAX on a persistent memory device through the NVML
+mounted with DAX on a persistent memory device through the PMDK
libpmemblk library.
.TP
.B dev\-dax
Read and write using device DAX to a persistent memory device (e.g.,
-/dev/dax0.0) through the NVML libpmem library.
+/dev/dax0.0) through the PMDK libpmem library.
.TP
.B external
Prefix to specify loading an external I/O engine object file. Append
.TP
.B libpmem
Read and write using mmap I/O to a file on a filesystem
-mounted with DAX on a persistent memory device through the NVML
+mounted with DAX on a persistent memory device through the PMDK
libpmem library.
.SS "I/O engine specific parameters"
In addition, there are some parameters which are only valid when a specific
.BI (sg)writefua \fR=\fPbool
With writefua option set to 1, write operations include the force
unit access (fua) flag. Default: 0.
+.TP
+.BI (sg)sg_write_mode \fR=\fPstr
+Specify the type of write commands to issue. This option can take three
+values:
+.RS
+.RS
+.TP
+.B write (default)
+Write opcodes are issued as usual
+.TP
+.B verify
+Issue WRITE AND VERIFY commands. The BYTCHK bit is set to 0. This
+directs the device to carry out a medium verification with no data
+comparison. The writefua option is ignored with this selection.
+.TP
+.B same
+Issue WRITE SAME commands. This transfers a single block to the device
+and writes this same block of data to a contiguous sequence of LBAs
+beginning at the specified offset. fio's block size parameter
+specifies the amount of data written with each command. However, the
+amount of data actually transferred to the device is equal to the
+device's block (sector) size. For a device with 512 byte sectors,
+blocksize=8k will write 16 sectors with each command. fio will still
+generate 8k of data for each command butonly the first 512 bytes will
+be used and transferred to the device. The writefua option is ignored
+with this selection.
+
.SS "I/O depth"
.TP
.BI iodepth \fR=\fPint
replay, the file needs to be turned into a blkparse binary data file first
(`blkparse <device> \-o /dev/null \-d file_for_fio.bin').
.TP
+.BI read_iolog_chunked \fR=\fPbool
+Determines how iolog is read. If false (default) entire \fBread_iolog\fR will
+be read at once. If selected true, input from iolog will be read gradually.
+Useful when iolog is very large, or it is generated.
+.TP
.BI replay_no_stall \fR=\fPbool
When replaying I/O with \fBread_iolog\fR the default behavior is to
attempt to respect the timestamps within the log and replay them with the
still respecting ordering. The result is the same I/O pattern to a given
device, but different timings.
.TP
+.BI replay_time_scale \fR=\fPint
+When replaying I/O with \fBread_iolog\fR, fio will honor the original timing
+in the trace. With this option, it's possible to scale the time. It's a
+percentage option, if set to 50 it means run at 50% the original IO rate in
+the trace. If set to 200, run at twice the original IO rate. Defaults to 100.
+.TP
.BI replay_redirect \fR=\fPstr
While replaying I/O patterns using \fBread_iolog\fR the default behavior
is to replay the IOPS onto the major/minor device that each IOP was recorded
Scale sector offsets down by this factor when replaying traces.
.SS "Threads, processes and job synchronization"
.TP
+.BI replay_skip \fR=\fPstr
+Sometimes it's useful to skip certain IO types in a replay trace. This could
+be, for instance, eliminating the writes in the trace. Or not replaying the
+trims/discards, if you are redirecting to a device that doesn't support them.
+This option takes a comma separated list of read, write, trim, sync.
+.TP
.BI thread
Fio defaults to creating jobs by using fork, however if this option is
given, fio will create jobs by using POSIX Threads' function
given is a read or random read, fio will assume that it should verify a
previously written file. If the data direction includes any form of write,
the verify will be of the newly written data.
+.P
+To avoid false verification errors, do not use the norandommap option when
+verifying data with async I/O engines and I/O depths > 1. Or use the
+norandommap and the lfsr random generator together to avoid writing to the
+same offset with muliple outstanding I/Os.
.RE
.TP
-.BI verifysort \fR=\fPbool
-If true, fio will sort written verify blocks when it deems it faster to read
-them back in a sorted manner. This is often the case when overwriting an
-existing file, since the blocks are already laid out in the file system. You
-can ignore this option unless doing huge amounts of really fast I/O where
-the red\-black tree sorting CPU time becomes significant. Default: true.
-.TP
-.BI verifysort_nr \fR=\fPint
-Pre\-load and sort verify blocks for a read workload.
-.TP
.BI verify_offset \fR=\fPint
Swap the verification header with data somewhere else in the block before
writing. It is swapped back before verifying.
projects / fio.git / blobdiff