Add OpenBSD support

[fio.git] / filesetup.c

diff --git a/filesetup.c b/filesetup.c
index 88d6565afca65335ea88627f810862385a15da94..601df8f1ddec655b09ec8eb7b2d03947307a8e65 100644 (file)
--- a/filesetup.c
+++ b/filesetup.c
@@ -97,9 +97,9 @@ static int extend_file(struct thread_data *td, struct fio_file *f)
 
                        r = fallocate(f->fd, FALLOC_FL_KEEP_SIZE, 0,
                                        f->real_file_size);
-                       if (r != 0) {
+                       if (r != 0)
                                td_verror(td, errno, "fallocate");
-                       }
+
                        break;
 #endif /* CONFIG_LINUX_FALLOCATE */
                default:
@@ -121,13 +121,14 @@ static int extend_file(struct thread_data *td, struct fio_file *f)
                dprint(FD_FILE, "truncate file %s, size %llu\n", f->file_name,
                                        (unsigned long long) f->real_file_size);
                if (ftruncate(f->fd, f->real_file_size) == -1) {
-                       td_verror(td, errno, "ftruncate");
-                       goto err;
+                       if (errno != EFBIG) {
+                               td_verror(td, errno, "ftruncate");
+                               goto err;
+                       }
                }
        }
 
        b = malloc(td->o.max_bs[DDIR_WRITE]);
-       memset(b, 0, td->o.max_bs[DDIR_WRITE]);
 
        left = f->real_file_size;
        while (left && !td->terminate) {
@@ -135,6 +136,8 @@ static int extend_file(struct thread_data *td, struct fio_file *f)
                if (bs > left)
                        bs = left;
 
+               fill_io_buffer(td, b, bs, bs);
+
                r = write(f->fd, b, bs);
 
                if (r > 0) {
@@ -355,7 +358,8 @@ static int get_file_size(struct thread_data *td, struct fio_file *f)
 
        if (f->file_offset > f->real_file_size) {
                log_err("%s: offset extends end (%llu > %llu)\n", td->o.name,
-                                       f->file_offset, f->real_file_size);
+                                       (unsigned long long) f->file_offset,
+                                       (unsigned long long) f->real_file_size);
                return 1;
        }
 
@@ -386,7 +390,8 @@ static int __file_invalidate_cache(struct thread_data *td, struct fio_file *f,
        if (f->mmap_ptr) {
                ret = posix_madvise(f->mmap_ptr, f->mmap_sz, POSIX_MADV_DONTNEED);
 #ifdef FIO_MADV_FREE
-               (void) posix_madvise(f->mmap_ptr, f->mmap_sz, FIO_MADV_FREE);
+               if (f->filetype == FIO_TYPE_BD)
+                       (void) posix_madvise(f->mmap_ptr, f->mmap_sz, FIO_MADV_FREE);
 #endif
        } else if (f->filetype == FIO_TYPE_FILE) {
                ret = posix_fadvise(f->fd, off, len, POSIX_FADV_DONTNEED);
@@ -441,6 +446,7 @@ int generic_close_file(struct thread_data fio_unused *td, struct fio_file *f)
                f->shadow_fd = -1;
        }
 
+       f->engine_data = 0;
        return ret;
 }
 
@@ -515,6 +521,13 @@ int generic_open_file(struct thread_data *td, struct fio_file *f)
                goto skip_flags;
        if (td->o.odirect)
                flags |= OS_O_DIRECT;
+       if (td->o.oatomic) {
+               if (!FIO_O_ATOMIC) {
+                       td_verror(td, EINVAL, "OS does not support atomic IO");
+                       return 1;
+               }
+               flags |= OS_O_DIRECT | FIO_O_ATOMIC;
+       }
        if (td->o.sync_io)
                flags |= O_SYNC;
        if (td->o.create_on_open)
@@ -580,7 +593,7 @@ open_again:
                         * work-around a "feature" on Linux, where a close of
                         * an fd that has been opened for write will trigger
                         * udev to call blkid to check partitions, fs id, etc.
-                        * That polutes the device cache, which can slow down
+                        * That pollutes the device cache, which can slow down
                         * unbuffered accesses.
                         */
                        if (f->shadow_fd == -1)
@@ -723,9 +736,13 @@ int setup_files(struct thread_data *td)
        struct fio_file *f;
        unsigned int i;
        int err = 0, need_extend;
+       int old_state;
 
        dprint(FD_FILE, "setup files\n");
 
+       old_state = td->runstate;
+       td_set_runstate(td, TD_SETTING_UP);
+
        if (o->read_iolog_file)
                goto done;
 
@@ -740,7 +757,7 @@ int setup_files(struct thread_data *td)
                err = get_file_sizes(td);
 
        if (err)
-               return err;
+               goto err_out;
 
        /*
         * check sizes. if the files/devices do not exist and the size
@@ -765,7 +782,7 @@ int setup_files(struct thread_data *td)
            !(o->nr_files && (o->file_size_low || o->file_size_high))) {
                log_err("%s: you need to specify size=\n", o->name);
                td_verror(td, EINVAL, "total_file_size");
-               return 1;
+               goto err_out;
        }
 
        /*
@@ -866,7 +883,7 @@ int setup_files(struct thread_data *td)
        }
 
        if (err)
-               return err;
+               goto err_out;
 
        if (!o->zone_size)
                o->zone_size = o->size;
@@ -882,9 +899,12 @@ done:
        if (o->create_only)
                td->done = 1;
 
+       td_set_runstate(td, old_state);
        return 0;
 err_offset:
        log_err("%s: you need to specify valid offset=\n", o->name);
+err_out:
+       td_set_runstate(td, old_state);
        return 1;
 }
 
@@ -918,9 +938,9 @@ static int __init_rand_distribution(struct thread_data *td, struct fio_file *f)
                seed = td->rand_seeds[4];
 
        if (td->o.random_distribution == FIO_RAND_DIST_ZIPF)
-               zipf_init(&f->zipf, nranges, td->o.zipf_theta, seed);
+               zipf_init(&f->zipf, nranges, td->o.zipf_theta.u.f, seed);
        else
-               pareto_init(&f->zipf, nranges, td->o.pareto_h, seed);
+               pareto_init(&f->zipf, nranges, td->o.pareto_h.u.f, seed);
 
        return 1;
 }