.. option:: --parse-only
- Parse options only, don\'t start any I/O.
+ Parse options only, don't start any I/O.
.. option:: --output=filename
**float_list**
A list of floating point numbers, separated by a ':' character.
+With the above in mind, here follows the complete list of fio job parameters.
+
Units
~~~~~
Bit based.
-With the above in mind, here follows the complete list of fio job parameters.
-
-
Job description
~~~~~~~~~~~~~~~
``sequential`` is only useful for random I/O, where fio would normally
generate a new random offset for every I/O. If you append e.g. 8 to randread,
- you would get a new random offset for every 8 I/O's. The result would be a
- seek for only every 8 I/O's, instead of for every I/O. Use ``rw=randread:8``
+ you would get a new random offset for every 8 I/Os. The result would be a
+ seek for only every 8 I/Os, instead of for every I/O. Use ``rw=randread:8``
to specify that. As sequential I/O is already sequential, setting
``sequential`` for that would not result in any differences. ``identical``
behaves in a similar fashion, except it sends the same offset 8 number of
**random**
Advise using **FADV_RANDOM**.
-.. option:: fadvise_stream=int
+.. option:: write_hint=str
+
+ Use :manpage:`fcntl(2)` to advise the kernel what life time to expect
+ from a write. Only supported on Linux, as of version 4.13. Accepted
+ values are:
+
+ **none**
+ No particular life time associated with this file.
+
+ **short**
+ Data written to this file has a short life time.
+
+ **medium**
+ Data written to this file has a medium life time.
+
+ **long**
+ Data written to this file has a long life time.
- Use :manpage:`posix_fadvise(2)` to advise the kernel what stream ID the
- writes issued belong to. Only supported on Linux. Note, this option may
- change going forward.
+ **extreme**
+ Data written to this file has a very long life time.
+
+ The values are all relative to each other, and no absolute meaning
+ should be associated with them.
.. option:: offset=int
* 60% of accesses should be to the first 10%
* 30% of accesses should be to the next 20%
- * 8% of accesses should be to to the next 30%
+ * 8% of accesses should be to the next 30%
* 2% of accesses should be to the next 40%
we can define that through zoning of the random accesses. For the above
**cudamalloc**
Use GPU memory as the buffers for GPUDirect RDMA benchmark.
+ The ioengine must be rdma.
The area allocated is a function of the maximum allowed bs size for the job,
multiplied by the I/O depth given. Note that for **shmhuge** and
Set RWF_HIPRI on I/O, indicating to the kernel that it's of higher priority
than normal.
+.. option:: hipri_percentage : [pvsync2]
+
+ When hipri is set this determines the probability of a pvsync2 IO being high
+ priority. The default is 100%.
+
.. option:: cpuload=int : [cpuio]
Attempt to use the specified percentage of CPU cycles. This is a mandatory
[libhdfs]
- the listening port of the HFDS cluster namenode.
+ The listening port of the HFDS cluster namenode.
.. option:: interface=str : [netsplice] [net]
hostname if the job is a TCP listener or UDP reader. For unix sockets, the
normal filename option should be used and the port is invalid.
-.. option:: listen : [net]
+.. option:: listen : [netsplice] [net]
For TCP network connections, tell fio to listen for incoming connections
rather than initiating an outgoing connection. The :option:`hostname` must
be omitted if this option is used.
-.. option:: pingpong : [net]
+.. option:: pingpong : [netsplice] [net]
Normally a network writer will just continue writing data, and a network
reader will just consume packages. If ``pingpong=1`` is set, a writer will
``pingpong=1`` should only be set for a single reader when multiple readers
are listening to the same address.
-.. option:: window_size : [net]
+.. option:: window_size : [netsplice] [net]
Set the desired socket buffer size for the connection.
-.. option:: mss : [net]
+.. option:: mss : [netsplice] [net]
Set the TCP maximum segment size (TCP_MAXSEG).
**0**
Default. Preallocate donor's file on init.
**1**
- Allocate space immediately inside defragment event, and free right
+ Allocate space immediately inside defragment event, and free right
after event.
.. option:: clustername=str : [rbd]
.. option:: chunk_size : [libhdfs]
- the size of the chunk to use for each file.
+ The size of the chunk to use for each file.
I/O depth
.. option:: verifysort_nr=int
- Pre-load and sort verify blocks for a read workload.
+ Pre-load and sort verify blocks for a read workload.
.. option:: verify_offset=int
.. option:: trim_backlog=int
- Verify that trim/discarded blocks are returned as zeros.
+ Trim after this number of blocks are written.
.. option:: trim_backlog_batch=int
.. option:: log_offset=int
If this is set, the iolog options will include the byte offset for the I/O
- entry as well as the other data values.
+ entry as well as the other data values. Defaults to 0 meaning that
+ offsets are not present in logs. Also see `Log File Formats`_.
.. option:: log_compression=int
**ios**
Number of I/Os performed by all groups.
**merge**
- Number of merges I/O the I/O scheduler.
+ Number of merges performed by the I/O scheduler.
**ticks**
Number of ticks we kept the disk busy.
**in_queue**
change.
Split up, the format is as follows (comments in brackets denote when a
-field was introduced or whether its specific to some terse version):
+field was introduced or whether it's specific to some terse version):
::
Fio supports a variety of log file formats, for logging latencies, bandwidth,
and IOPS. The logs share a common format, which looks like this:
- *time* (`msec`), *value*, *data direction*, *offset*
+ *time* (`msec`), *value*, *data direction*, *block size* (`bytes`),
+ *offset* (`bytes`)
-Time for the log entry is always in milliseconds. The *value* logged depends
+*Time* for the log entry is always in milliseconds. The *value* logged depends
on the type of log, it will be one of the following:
**Latency log**
**2**
I/O is a TRIM
-The *offset* is the offset, in bytes, from the start of the file, for that
-particular I/O. The logging of the offset can be toggled with
-:option:`log_offset`.
+The entry's *block size* is always in bytes. The *offset* is the offset, in bytes,
+from the start of the file, for that particular I/O. The logging of the offset can be
+toggled with :option:`log_offset`.
Fio defaults to logging every individual I/O. When IOPS are logged for individual
-I/Os the value entry will always be 1. If windowed logging is enabled through
+I/Os the *value* entry will always be 1. If windowed logging is enabled through
:option:`log_avg_msec`, fio logs the average values over the specified period of time.
If windowed logging is enabled and :option:`log_max_value` is set, then fio logs
-maximum values in that window instead of averages. Since 'data direction' and
-'offset' are per-I/O values, they aren't applicable if windowed logging is enabled.
+maximum values in that window instead of averages. Since *data direction*, *block
+size* and *offset* are per-I/O values, if windowed logging is enabled they
+aren't applicable and will be 0.
Client/Server
-------------
projects / fio.git / blobdiff