'#', the entire line is discarded as a comment.
So let's look at a really simple job file that defines two processes, each
-randomly reading from a 128MiB file.
+randomly reading from a 128MB file.
; -- start job file --
[global]
Here we have no global section, as we only have one job defined anyway.
We want to use async io here, with a depth of 4 for each file. We also
-increased the buffer size used to 32KiB and define numjobs to 4 to
+increased the buffer size used to 32KB and define numjobs to 4 to
fork 4 identical jobs. The result is 4 processes each randomly writing
-to their own 64MiB file. Instead of using the above job file, you could
+to their own 64MB file. Instead of using the above job file, you could
have given the parameters on the command line. For this case, you would
specify:
a string. The following types are used:
str String. This is a sequence of alpha characters.
-time Integer with possible time postfix. In seconds unless otherwise
+time Integer with possible time suffix. In seconds unless otherwise
specified, use eg 10m for 10 minutes. Accepts s/m/h for seconds,
minutes, and hours.
-int SI integer. A whole number value, which may contain a postfix
- describing the base of the number. Accepted postfixes are k/m/g,
- meaning kilo, mega, and giga. So if you want to specify 4096,
- you could either write out '4096' or just give 4k. The postfixes
- signify base 2 values, so 1024 is 1k and 1024k is 1m and so on.
- If the option accepts an upper and lower range, use a colon ':'
- or minus '-' to separate such values. May also include a prefix
- to indicate numbers base. If 0x is used, the number is assumed to
- be hexadecimal. See irange.
+int SI integer. A whole number value, which may contain a suffix
+ describing the base of the number. Accepted suffixes are k/m/g/t/p,
+ meaning kilo, mega, giga, tera, and peta. The suffix is not case
+ sensitive. So if you want to specify 4096, you could either write
+ out '4096' or just give 4k. The suffixes signify base 2 values, so
+ 1024 is 1k and 1024k is 1m and so on. If the option accepts an upper
+ and lower range, use a colon ':' or minus '-' to separate such values.
+ May also include a prefix to indicate numbers base. If 0x is used,
+ the number is assumed to be hexadecimal. See irange.
bool Boolean. Usually parsed as an integer, however only defined for
true and false (1 and 0).
-irange Integer range with postfix. Allows value range to be given, such
+irange Integer range with suffix. Allows value range to be given, such
as 1024-4096. A colon may also be used as the separator, eg
1k:4k. If the option allows two sets of ranges, they can be
specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see
IO's, instead of for every IO. Use rw=randread:8 to specify
that.
+kb_base=int The base unit for a kilobyte. The defacto base is 2^10, 1024.
+ Storage manufacturers like to use 10^3 or 1000 as a base
+ ten unit instead, for obvious reasons. Allow values are
+ 1024 or 1000, with 1024 being the default.
+
randrepeat=bool For random IO workloads, seed the generator in a predictable
way so that results are repeatable across repetitions.
after every block.
rate=int Cap the bandwidth used by this job. The number is in bytes/sec,
- the normal postfix rules apply. You can use rate=500k to limit
+ the normal suffix rules apply. You can use rate=500k to limit
reads and writes to 500k each, or you can specify read and
writes separately. Using rate=1m,500k would limit reads to
1MB/sec and writes to 500KB/sec. Capping only reads or
that for shmhuge and mmaphuge to work, the system must have
free huge pages allocated. This can normally be checked
and set by reading/writing /proc/sys/vm/nr_hugepages on a
- Linux system. Fio assumes a huge page is 4MiB in size. So
+ Linux system. Fio assumes a huge page is 4MB in size. So
to calculate the number of huge pages you need for a given
job file, add up the io depth of all jobs (normally one unless
iodepth= is used) and multiply by the maximum bs set. Then
location should point there. So if it's mounted in /huge,
you would use mem=mmaphuge:/huge/somefile.
+iomem_align=int This indiciates the memory alignment of the IO memory buffers.
+ Note that the given alignment is applied to the first IO unit
+ buffer, if using iodepth the alignment of the following buffers
+ are given by the bs used. In other words, if using a bs that is
+ a multiple of the page sized in the system, all buffers will
+ be aligned to this value. If using a bs that is not page
+ aligned, the alignment of subsequent IO memory buffers is the
+ sum of the iomem_align and bs used.
+
hugepage-size=int
Defines the size of a huge page. Must at least be equal
- to the system setting, see /proc/meminfo. Defaults to 4MiB.
+ to the system setting, see /proc/meminfo. Defaults to 4MB.
Should probably always be a multiple of megabytes, so using
hugepage-size=Xm is the preferred way to set this to avoid
setting a non-pow-2 bad value.
pre_read=bool If this is given, files will be pre-read into memory before
starting the given IO operation. This will also clear
the 'invalidate' flag, since it is pointless to pre-read
- and then drop the cache.
+ and then drop the cache. This will only work for IO engines
+ that are seekable, since they allow you to read the same data
+ multiple times. Thus it will not work on eg network or splice
+ IO.
unlink=bool Unlink the job files when done. Not the default, as repeated
runs of that job would then waste time recreating the file
before quitting on a block verification failure. If this
option is set, fio will exit the job on the first observed
failure.
+
+verify_async=int Fio will normally verify IO inline from the submitting
+ thread. This option takes an integer describing how many
+ async offload threads to create for IO verification instead,
+ causing fio to offload the duty of verifying IO contents
+ to one or more separate threads. If using this offload
+ option, even sync IO engines can benefit from using an
+ iodepth setting higher than 1, as it allows them to have
+ IO in flight while verifies are running.
+
+verify_async_cpus=str Tell fio to set the given CPU affinity on the
+ async IO verification threads. See cpus_allowed for the
+ format used.
stonewall Wait for preceeding jobs in the job file to exit, before
starting this one. Can be used to insert serialization
direction, the output looks like:
Client1 (g=0): err= 0:
- write: io= 32MiB, bw= 666KiB/s, runt= 50320msec
+ write: io= 32MB, bw= 666KB/s, runt= 50320msec
slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92
clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82
- bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68
+ bw (KB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68
cpu : usr=1.49%, sys=0.25%, ctx=7969, majf=0, minf=17
IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
will look like this:
Run status group 0 (all jobs):
- READ: io=64MiB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec
- WRITE: io=64MiB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec
+ READ: io=64MB, aggrb=22178, minb=11355, maxb=11814, mint=2840msec, maxt=2955msec
+ WRITE: io=64MB, aggrb=1302, minb=666, maxb=669, mint=50093msec, maxt=50320msec
For each data direction, it prints:
jobname, groupid, error
READ status:
- KiB IO, bandwidth (KiB/sec), runtime (msec)
+ KB IO, bandwidth (KB/sec), runtime (msec)
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
Bw: min, max, aggregate percentage of total, mean, deviation
WRITE status:
- KiB IO, bandwidth (KiB/sec), runtime (msec)
+ KB IO, bandwidth (KB/sec), runtime (msec)
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
Bw: min, max, aggregate percentage of total, mean, deviation
projects / fio.git / blobdiff