IO engine How do we issue io? We could be memory mapping the
file, we could be using regular read/write, we
- could be using splice, async io, or even
+ could be using splice, async io, syslet, or even
SG (SCSI generic sg).
- IO depth If the io engine is async, how large a queueing
+ IO depth If the io engine is async, how large a queuing
depth do we want to maintain?
IO type Should we be doing buffered io, or direct/raw io?
fio does not need to run as root, except if the files or devices specified
in the job section requires that. Some other options may also be restricted,
-such as memory locking, io scheduler switching, and descreasing the nice value.
+such as memory locking, io scheduler switching, and decreasing the nice value.
4.0 Job file format
A global section sets defaults for the jobs described in that file. A job
may override a global section parameter, and a job file may even have
several global sections if so desired. A job is only affected by a global
-section residing above it. If the first character in a line is a ';', the
-entire line is discarded as a comment.
+section residing above it. If the first character in a line is a ';' or a
+'#', the entire line is discarded as a comment.
So lets look at a really simple job file that define to threads, each
randomly reading from a 128MiB file.
a string. The following types are used:
str String. This is a sequence of alpha characters.
-int Integer. A whole number value, may be negative.
+int Integer. A whole number value, can be negative. If prefixed with
+ 0x, the integer is assumed to be of base 16 (hexidecimal).
siint SI integer. A whole number value, which may contain a postfix
describing the base of the number. Accepted postfixes are k/m/g,
- meaning kilo, mega, and giga. So if you want to specifiy 4096,
+ meaning kilo, mega, and giga. So if you want to specify 4096,
you could either write out '4096' or just give 4k. The postfixes
signify base 2 values, so 1024 is 1k and 1024k is 1m and so on.
+ If the option accepts an upper and lower range, use a colon ':'
+ or minus '-' to seperate such values. See irange.
bool Boolean. Usually parsed as an integer, however only defined for
true and false (1 and 0).
irange Integer range with postfix. Allows value range to be given, such
- as 1024-4096. Also see siint.
+ as 1024-4096. A colon may also be used as the seperator, eg
+ 1k:4k. If the option allows two sets of ranges, they can be
+ specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see
+ siint.
With the above in mind, here follows the complete list of fio job
parameters.
name=str ASCII name of the job. This may be used to override the
name printed by fio for this job. Otherwise the job
name is used. On the command line this parameter has the
- special purpose of also signalling the start of a new
+ special purpose of also signaling the start of a new
job.
+description=str Text description of the job. Doesn't do anything except
+ dump this text description when this job is run. It's
+ not parsed.
+
directory=str Prefix filenames with this directory. Used to places files
in a different location than "./".
filename=str Fio normally makes up a filename based on the job name,
thread number, and file number. If you want to share
files between threads in a job or several jobs, specify
- a filename for each of them to override the default.
-
+ a filename for each of them to override the default. If
+ the ioengine used is 'net', the filename is the host and
+ port to connect to in the format of =host/port. If the
+ ioengine is file based, you can specify a number of files
+ by seperating the names with a ':' colon. So if you wanted
+ a job to open /dev/sda and /dev/sdb as the two working files,
+ you would use filename=/dev/sda:/dev/sdb. '-' is a reserved
+ name, meaning stdin or stdout. Which of the two depends
+ on the read/write direction set.
+
+opendir=str Tell fio to recursively add any file it can find in this
+ directory and down the file system tree.
+
+readwrite=str
rw=str Type of io pattern. Accepted values are:
read Sequential reads
For the mixed io types, the default is to split them 50/50.
For certain types of io the result may still be skewed a bit,
- since the speed may be different.
-
-size=siint The total size of file io for this job. This may describe
- the size of the single file the job uses, or it may be
- divided between the number of files in the job. If the
- file already exists, the file size will be adjusted to this
- size if larger than the current file size. If this parameter
- is not given and the file exists, the file size will be used.
-
-bs=siint The block size used for the io units. Defaults to 4k.
-
+ since the speed may be different. It is possible to specify
+ a number of IO's to do before getting a new offset - this
+ is only useful for random IO, where fio would normally
+ generate a new random offset for every IO. If you append
+ eg 8 to randread, you would get a new random offset for
+ every 8 IO's. The result would be a seek for only every 8
+ IO's, instead of for every IO. Use rw=randread:8 to specify
+ that.
+
+randrepeat=bool For random IO workloads, seed the generator in a predictable
+ way so that results are repeatable across repetitions.
+
+fadvise_hint=bool By default, fio will use fadvise() to advise the kernel
+ on what IO patterns it is likely to issue. Sometimes you
+ want to test specific IO patterns without telling the
+ kernel about it, in which case you can disable this option.
+ If set, fio will use POSIX_FADV_SEQUENTIAL for sequential
+ IO and POSIX_FADV_RANDOM for random IO.
+
+size=siint The total size of file io for this job. Fio will run until
+ this many bytes has been transferred, unless runtime is
+ limited by other options (such as 'runtime', for instance).
+ Unless specific nr_files and filesize options are given,
+ fio will divide this size between the available files
+ specified by the job.
+
+filesize=siint Individual file sizes. May be a range, in which case fio
+ will select sizes for files at random within the given range
+ and limited to 'size' in total (if that is given). If not
+ given, each created file is the same size.
+
+fill_device=bool Sets size to something really large and waits for ENOSPC (no
+ space left on device) as the terminating condition. Only makes
+ sense with sequential write.
+
+blocksize=siint
+bs=siint The block size used for the io units. Defaults to 4k. Values
+ can be given for both read and writes. If a single siint is
+ given, it will apply to both. If a second siint is specified
+ after a comma, it will apply to writes only. In other words,
+ the format is either bs=read_and_write or bs=read,write.
+ bs=4k,8k will thus use 4k blocks for reads, and 8k blocks
+ for writes. If you only wish to set the write size, you
+ can do so by passing an empty read size - bs=,8k will set
+ 8k for writes and leave the read default value.
+
+blocksize_range=irange
bsrange=irange Instead of giving a single block size, specify a range
and fio will mix the issued io block sizes. The issued
io unit will always be a multiple of the minimum value
- given.
+ given (also see bs_unaligned). Applies to both reads and
+ writes, however a second range can be given after a comma.
+ See bs=.
+
+bssplit=str Sometimes you want even finer grained control of the
+ block sizes issued, not just an even split between them.
+ This option allows you to weight various block sizes,
+ so that you are able to define a specific amount of
+ block sizes issued. The format for this option is:
+
+ bssplit=blocksize/percentage:blocksize/percentage
+
+ for as many block sizes as needed. So if you want to define
+ a workload that has 50% 64k blocks, 10% 4k blocks, and
+ 40% 32k blocks, you would write:
+
+ bssplit=4k/10:64k/50:32k/40
+
+ Ordering does not matter. If the percentage is left blank,
+ fio will fill in the remaining values evenly. So a bssplit
+ option like this one:
+
+ bssplit=4k/50:1k/:32k/
+
+ would have 50% 4k ios, and 25% 1k and 32k ios. The percentages
+ always add up to 100, if bssplit is given a range that adds
+ up to more, it will error out.
+
+blocksize_unaligned
+bs_unaligned If this option is given, any byte size value within bsrange
+ may be used as a block range. This typically wont work with
+ direct IO, as that normally requires sector alignment.
+
+zero_buffers If this option is given, fio will init the IO buffers to
+ all zeroes. The default is to fill them with random data.
nrfiles=int Number of files to use for this job. Defaults to 1.
+openfiles=int Number of files to keep open at the same time. Defaults to
+ the same as nrfiles, can be set smaller to limit the number
+ simultaneous opens.
+
+file_service_type=str Defines how fio decides which file from a job to
+ service next. The following types are defined:
+
+ random Just choose a file at random.
+
+ roundrobin Round robin over open files. This
+ is the default.
+
+ The string can have a number appended, indicating how
+ often to switch to a new file. So if option random:4 is
+ given, fio will switch to a new random file after 4 ios
+ have been issued.
+
ioengine=str Defines how the job issues io to the file. The following
types are defined:
sync Basic read(2) or write(2) io. lseek(2) is
used to position the io location.
+ psync Basic pread(2) or pwrite(2) io.
+
+ vsync Basic readv(2) or writev(2) IO.
+
libaio Linux native asynchronous io.
posixaio glibc posix asynchronous io.
vmsplice(2) to transfer data from user
space to the kernel.
+ syslet-rw Use the syslet system calls to make
+ regular read/write async.
+
sg SCSI generic sg v3 io. May either be
- syncrhonous using the SG_IO ioctl, or if
+ synchronous using the SG_IO ioctl, or if
the target is an sg character device
we use read(2) and write(2) for asynchronous
io.
+ null Doesn't transfer any data, just pretends
+ to. This is mainly used to exercise fio
+ itself and for debugging/testing purposes.
+
+ net Transfer over the network to given host:port.
+ 'filename' must be set appropriately to
+ filename=host/port regardless of send
+ or receive, if the latter only the port
+ argument is used.
+
+ netsplice Like net, but uses splice/vmsplice to
+ map data and send/receive.
+
+ cpuio Doesn't transfer any data, but burns CPU
+ cycles according to the cpuload= and
+ cpucycle= options. Setting cpuload=85
+ will cause that job to do nothing but burn
+ 85% of the CPU. In case of SMP machines,
+ use numjobs=<no_of_cpu> to get desired CPU
+ usage, as the cpuload only loads a single
+ CPU at the desired rate.
+
+ guasi The GUASI IO engine is the Generic Userspace
+ Asyncronous Syscall Interface approach
+ to async IO. See
+
+ http://www.xmailserver.org/guasi-lib.html
+
+ for more info on GUASI.
+
+ external Prefix to specify loading an external
+ IO engine object file. Append the engine
+ filename, eg ioengine=external:/tmp/foo.o
+ to load ioengine foo.o in /tmp.
+
iodepth=int This defines how many io units to keep in flight against
the file. The default is 1 for each file defined in this
job, can be overridden with a larger value for higher
concurrency.
+iodepth_batch=int This defines how many pieces of IO to submit at once.
+ It defaults to 1 which means that we submit each IO
+ as soon as it is available, but can be raised to submit
+ bigger batches of IO at the time.
+
+iodepth_low=int The low water mark indicating when to start filling
+ the queue again. Defaults to the same as iodepth, meaning
+ that fio will attempt to keep the queue full at all times.
+ If iodepth is set to eg 16 and iodepth_low is set to 4, then
+ after fio has filled the queue of 16 requests, it will let
+ the depth drain down to 4 before starting to fill it again.
+
direct=bool If value is true, use non-buffered io. This is usually
- O_DIRECT. Defaults to true.
+ O_DIRECT.
+
+buffered=bool If value is true, use buffered io. This is the opposite
+ of the 'direct' option. Defaults to true.
offset=siint Start io at the given offset in the file. The data before
the given offset will not be touched. This effectively
32 as a parameter, fio will sync the file for every 32
writes issued. If fio is using non-buffered io, we may
not sync the file. The exception is the sg io engine, which
- syncronizes the disk cache anyway.
+ synchronizes the disk cache anyway.
overwrite=bool If writing to a file, setup the file first and do overwrites.
end_fsync=bool If true, fsync file contents when the job exits.
-rwmixcycle=int Value in miliseconds describing how often to switch between
+fsync_on_close=bool If true, fio will fsync() a dirty file on close.
+ This differs from end_fsync in that it will happen on every
+ file close, not just at the end of the job.
+
+rwmixcycle=int Value in milliseconds describing how often to switch between
reads and writes for a mixed workload. The default is
500 msecs.
new random offset without looking at past io history. This
means that some blocks may not be read or written, and that
some blocks may be read/written more than once. This option
- is mutually exclusive with verify= for that reason.
+ is mutually exclusive with verify= for that reason, since
+ fio doesn't track potential block rewrites which may alter
+ the calculated checksum for that block.
nice=int Run the job with the given nice value. See man nice(2).
thinktime=int Stall the job x microseconds after an io has completed before
issuing the next. May be used to simulate processing being
- done by an application.
+ done by an application. See thinktime_blocks and
+ thinktime_spin.
+
+thinktime_spin=int
+ Only valid if thinktime is set - pretend to spend CPU time
+ doing something with the data received, before falling back
+ to sleeping for the rest of the period specified by
+ thinktime.
+
+thinktime_blocks
+ Only valid if thinktime is set - control how many blocks
+ to issue, before waiting 'thinktime' usecs. If not set,
+ defaults to 1 which will make fio wait 'thinktime' usecs
+ after every block.
rate=int Cap the bandwidth used by this job to this number of KiB/sec.
ratemin=int Tell fio to do whatever it can to maintain at least this
- bandwidth.
+ bandwidth. Failing to meet this requirement, will cause
+ the job to exit.
+
+rate_iops=int Cap the bandwidth to this number of IOPS. Basically the same
+ as rate, just specified independently of bandwidth. If the
+ job is given a block size range instead of a fixed value,
+ the smallest block size is used as the metric.
+
+rate_iops_min=int If fio doesn't meet this rate of IO, it will cause
+ the job to exit.
ratecycle=int Average bandwidth for 'rate' and 'ratemin' over this number
- of miliseconds.
+ of milliseconds.
cpumask=int Set the CPU affinity of this job. The parameter given is a
- bitmask of allowed CPU's the job may run on. See man
- sched_setaffinity(2).
+ bitmask of allowed CPU's the job may run on. So if you want
+ the allowed CPUs to be 1 and 5, you would pass the decimal
+ value of (1 << 1 | 1 << 5), or 34. See man
+ sched_setaffinity(2). This may not work on all supported
+ operating systems or kernel versions.
+
+cpus_allowed=str Controls the same options as cpumask, but it allows a text
+ setting of the permitted CPUs instead. So to use CPUs 1 and
+ 5, you would specify cpus_allowed=1,5.
startdelay=int Start this job the specified number of seconds after fio
has started. Only useful if the job file contains several
jobs, and you want to delay starting some jobs to a certain
time.
-timeout=int Tell fio to terminate processing after the specified number
+runtime=int Tell fio to terminate processing after the specified number
of seconds. It can be quite hard to determine for how long
a specified job will run, so this parameter is handy to
cap the total runtime to a given time.
+time_based If set, fio will run for the duration of the runtime
+ specified even if the file(s) are completey read or
+ written. It will simply loop over the same workload
+ as many times as the runtime allows.
+
invalidate=bool Invalidate the buffer/page cache parts for this file prior
to starting io. Defaults to true.
sync=bool Use sync io for buffered writes. For the majority of the
io engines, this means using O_SYNC.
+iomem=str
mem=str Fio can use various types of memory as the io unit buffer.
The allowed values are:
shm Use shared memory as the buffers. Allocated
through shmget(2).
- mmap Use anonymous memory maps as the buffers.
- Allocated through mmap(2).
+ shmhuge Same as shm, but use huge pages as backing.
+
+ mmap Use mmap to allocate buffers. May either be
+ anonymous memory, or can be file backed if
+ a filename is given after the option. The
+ format is mem=mmap:/path/to/file.
+
+ mmaphuge Use a memory mapped huge file as the buffer
+ backing. Append filename after mmaphuge, ala
+ mem=mmaphuge:/hugetlbfs/file
The area allocated is a function of the maximum allowed
- bs size for the job, multiplied by the io depth given.
+ bs size for the job, multiplied by the io depth given. Note
+ that for shmhuge and mmaphuge to work, the system must have
+ free huge pages allocated. This can normally be checked
+ and set by reading/writing /proc/sys/vm/nr_hugepages on a
+ Linux system. Fio assumes a huge page is 4MiB in size. So
+ to calculate the number of huge pages you need for a given
+ job file, add up the io depth of all jobs (normally one unless
+ iodepth= is used) and multiply by the maximum bs set. Then
+ divide that number by the huge page size. You can see the
+ size of the huge pages in /proc/meminfo. If no huge pages
+ are allocated by having a non-zero number in nr_hugepages,
+ using mmaphuge or shmhuge will fail. Also see hugepage-size.
+
+ mmaphuge also needs to have hugetlbfs mounted and the file
+ location should point there. So if it's mounted in /huge,
+ you would use mem=mmaphuge:/huge/somefile.
+
+hugepage-size=siint
+ Defines the size of a huge page. Must at least be equal
+ to the system setting, see /proc/meminfo. Defaults to 4MiB.
+ Should probably always be a multiple of megabytes, so using
+ hugepage-size=Xm is the preferred way to set this to avoid
+ setting a non-pow-2 bad value.
exitall When one job finishes, terminate the rest. The default is
to wait for each job to finish, sometimes that is not the
desired action.
bwavgtime=int Average the calculated bandwidth over the given time. Value
- is specified in miliseconds.
+ is specified in milliseconds.
create_serialize=bool If true, serialize the file creating for the jobs.
This may be handy to avoid interleaving of data
create_fsync=bool fsync the data file after creation. This is the
default.
-unlink Unlink the job files when done. fio defaults to doing this,
- if it created the file itself.
+unlink=bool Unlink the job files when done. Not the default, as repeated
+ runs of that job would then waste time recreating the fileset
+ again and again.
loops=int Run the specified number of iterations of this job. Used
to repeat the same workload a given number of times. Defaults
to 1.
+do_verify=bool Run the verify phase after a write phase. Only makes sense if
+ verify is set. Defaults to 1.
+
verify=str If writing to a file, fio can verify the file contents
after each iteration of the job. The allowed values are:
md5 Use an md5 sum of the data area and store
it in the header of each block.
+ crc64 Use an experimental crc64 sum of the data
+ area and store it in the header of each
+ block.
+
crc32 Use a crc32 sum of the data area and store
it in the header of each block.
- This option can be used for repeated burnin tests of a
+ crc16 Use a crc16 sum of the data area and store
+ it in the header of each block.
+
+ crc7 Use a crc7 sum of the data area and store
+ it in the header of each block.
+
+ sha512 Use sha512 as the checksum function.
+
+ sha256 Use sha256 as the checksum function.
+
+ meta Write extra information about each io
+ (timestamp, block number etc.). The block
+ number is verified.
+
+ null Only pretend to verify. Useful for testing
+ internals with ioengine=null, not for much
+ else.
+
+ This option can be used for repeated burn-in tests of a
system to make sure that the written data is also
correctly read back.
+verifysort=bool If set, fio will sort written verify blocks when it deems
+ it faster to read them back in a sorted manner. This is
+ often the case when overwriting an existing file, since
+ the blocks are already laid out in the file system. You
+ can ignore this option unless doing huge amounts of really
+ fast IO where the red-black tree sorting CPU time becomes
+ significant.
+
+verify_offset=siint Swap the verification header with data somewhere else
+ in the block before writing. Its swapped back before
+ verifying.
+
+verify_interval=siint Write the verification header at a finer granularity
+ than the blocksize. It will be written for chunks the
+ size of header_interval. blocksize should divide this
+ evenly.
+
+verify_pattern=int If set, fio will fill the io buffers with this
+ pattern. Fio defaults to filling with totally random
+ bytes, but sometimes it's interesting to fill with a known
+ pattern for io verification purposes. Depending on the
+ width of the pattern, fio will fill 1/2/3/4 bytes of the
+ buffer at the time. The verify_pattern cannot be larger than
+ a 32-bit quantity.
+
+verify_fatal=bool Normally fio will keep checking the entire contents
+ before quitting on a block verification failure. If this
+ option is set, fio will exit the job on the first observed
+ failure.
+
stonewall Wait for preceeding jobs in the job file to exit, before
starting this one. Can be used to insert serialization
- points in the job file.
+ points in the job file. A stone wall also implies starting
+ a new reporting group.
+
+new_group Start a new reporting group. If this option isn't given,
+ jobs in a file will be part of the same reporting group
+ unless seperated by a stone wall (or if it's a group
+ by itself, with the numjobs option).
numjobs=int Create the specified number of clones of this job. May be
used to setup a larger number of threads/processes doing
- the same thing.
+ the same thing. We regard that grouping of jobs as a
+ specific group.
+
+group_reporting If 'numjobs' is set, it may be interesting to display
+ statistics for the group as a whole instead of for each
+ individual job. This is especially true of 'numjobs' is
+ large, looking at individual thread/process output quickly
+ becomes unwieldy. If 'group_reporting' is specified, fio
+ will show the final report per-group instead of per-job.
thread fio defaults to forking jobs, however if this option is
given, fio will use pthread_create(3) to create threads
read_iolog=str Open an iolog with the specified file name and replay the
io patterns it contains. This can be used to store a
- workload and replay it sometime later.
+ workload and replay it sometime later. The iolog given
+ may also be a blktrace binary file, which allows fio
+ to replay a workload captured by blktrace. See blktrace
+ for how to capture such logging data. For blktrace replay,
+ the file needs to be turned into a blkparse binary data
+ file first (blktrace <device> -d file_for_fio.bin).
write_bw_log If given, write a bandwidth log of the jobs in this job
file. Can be used to store data of the bandwidth of the
percentage of CPU cycles.
cpuchunks=int If the job is a CPU cycle eater, split the load into
- cycles of the given time. In miliseconds.
+ cycles of the given time. In milliseconds.
+
+disk_util=bool Generate disk utilization statistics, if the platform
+ supports it. Defaults to on.
6.0 Interpreting the output
fio spits out a lot of output. While running, fio will display the
status of the jobs created. An example of that would be:
-Threads running: 1: [_r] [24.79% done] [eta 00h:01m:31s]
+Threads: 1: [_r] [24.8% done] [ 13509/ 8334 kb/s] [eta 00h:01m:31s]
The characters inside the square brackets denote the current status of
each thread. The possible values (in typical life cycle order) are:
_ Thread reaped.
The other values are fairly self explanatory - number of threads
-currently running and doing io, and the estimated completion percentage
-and time for the running group. It's impossible to estimate runtime
-of the following groups (if any).
+currently running and doing io, rate of io since last check (read speed
+listed first, then write speed), and the estimated completion percentage
+and time for the running group. It's impossible to estimate runtime of
+the following groups (if any).
When fio is done (or interrupted by ctrl-c), it will show the data for
each thread, group of threads, and disks in that order. For each data
Client1 (g=0): err= 0:
write: io= 32MiB, bw= 666KiB/s, runt= 50320msec
- slat (msec): min= 0, max= 136, avg= 0.03, dev= 1.92
- clat (msec): min= 0, max= 631, avg=48.50, dev=86.82
- bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, dev=681.68
- cpu : usr=1.49%, sys=0.25%, ctx=7969
+ slat (msec): min= 0, max= 136, avg= 0.03, stdev= 1.92
+ clat (msec): min= 0, max= 631, avg=48.50, stdev=86.82
+ bw (KiB/s) : min= 0, max= 1196, per=51.00%, avg=664.02, stdev=681.68
+ cpu : usr=1.49%, sys=0.25%, ctx=7969, majf=0, minf=17
+ IO depths : 1=0.1%, 2=0.3%, 4=0.5%, 8=99.0%, 16=0.0%, 32=0.0%, >32=0.0%
+ issued r/w: total=0/32768, short=0/0
+ lat (msec): 2=1.6%, 4=0.0%, 10=3.2%, 20=12.8%, 50=38.4%, 100=24.8%,
+ lat (msec): 250=15.2%, 500=0.0%, 750=0.0%, 1000=0.0%, >=2048=0.0%
The client number is printed, along with the group id and error of that
thread. Below is the io statistics, here for writes. In the order listed,
io= Number of megabytes io performed
bw= Average bandwidth rate
runt= The runtime of that thread
- slat= Submission latency (avg being the average, dev being the
+ slat= Submission latency (avg being the average, stdev being the
standard deviation). This is the time it took to submit
the io. For sync io, the slat is really the completion
- latency, since queue/complete is one operation there.
+ latency, since queue/complete is one operation there. This
+ value can be in miliseconds or microseconds, fio will choose
+ the most appropriate base and print that. In the example
+ above, miliseconds is the best scale.
clat= Completion latency. Same names as slat, this denotes the
time from submission to completion of the io pieces. For
sync io, clat will usually be equal (or very close) to 0,
only really useful if the threads in this group are on the
same disk, since they are then competing for disk access.
cpu= CPU usage. User and system time, along with the number
- of context switches this thread went through.
+ of context switches this thread went through, usage of
+ system and user time, and finally the number of major
+ and minor page faults.
+IO depths= The distribution of io depths over the job life time. The
+ numbers are divided into powers of 2, so for example the
+ 16= entries includes depths up to that value but higher
+ than the previous entry. In other words, it covers the
+ range from 16 to 31.
+IO issued= The number of read/write requests issued, and how many
+ of them were short.
+IO latencies= The distribution of IO completion latencies. This is the
+ time from when IO leaves fio and when it gets completed.
+ The numbers follow the same pattern as the IO depths,
+ meaning that 2=1.6% means that 1.6% of the IO completed
+ within 2 msecs, 20=12.8% means that 12.8% of the IO
+ took more than 10 msecs, but less than (or equal to) 20 msecs.
After each client has been listed, the group statistics are printed. They
will look like this:
----------------
For scripted usage where you typically want to generate tables or graphs
-of the results, fio can output the results in a comma seperated format.
+of the results, fio can output the results in a semicolon separated format.
The format is one long line of values, such as:
-client1,0,0,936,331,2894,0,0,0.000000,0.000000,1,170,22.115385,34.290410,16,714,84.252874%,366.500000,566.417819,3496,1237,2894,0,0,0.000000,0.000000,0,246,6.671625,21.436952,0,2534,55.465300%,1406.600000,2008.044216,0.000000%,0.431928%,1109
+client1;0;0;1906777;1090804;1790;0;0;0.000000;0.000000;0;0;0.000000;0.000000;929380;1152890;25.510151%;1078276.333333;128948.113404;0;0;0;0;0;0.000000;0.000000;0;0;0.000000;0.000000;0;0;0.000000%;0.000000;0.000000;100.000000%;0.000000%;324;100.0%;0.0%;0.0%;0.0%;0.0%;0.0%;0.0%;100.0%;0.0%;0.0%;0.0%;0.0%;0.0%
+;0.0%;0.0%;0.0%;0.0%;0.0%
Split up, the format is as follows:
KiB IO, bandwidth (KiB/sec), runtime (msec)
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
- Bw: min, max, aggreate percentage of total, mean, deviation
+ Bw: min, max, aggregate percentage of total, mean, deviation
WRITE status:
KiB IO, bandwidth (KiB/sec), runtime (msec)
Submission latency: min, max, mean, deviation
Completion latency: min, max, mean, deviation
- Bw: min, max, aggreate percentage of total, mean, deviation
- CPU usage: user, system, context switches
+ Bw: min, max, aggregate percentage of total, mean, deviation
+ CPU usage: user, system, context switches, major faults, minor faults
+ IO depths: <=1, 2, 4, 8, 16, 32, >=64
+ IO latencies: <=2, 4, 10, 20, 50, 100, 250, 500, 750, 1000, >=2000
+ Text description
projects / fio.git / blobdiff