Parse options only, don't start any I/O.
+.. option:: --merge-blktrace-only
+
+ Merge blktraces only, don't start any I/O.
+
.. option:: --output=filename
Write output to file `filename`.
.. option:: --readonly
- Turn on safety read-only checks, preventing writes. The ``--readonly``
- option is an extra safety guard to prevent users from accidentally starting
- a write workload when that is not desired. Fio will only write if
- `rw=write/randwrite/rw/randrw` is given. This extra safety net can be used
- as an extra precaution as ``--readonly`` will also enable a write check in
- the I/O engine core to prevent writes due to unknown user space bug(s).
+ Turn on safety read-only checks, preventing writes and trims. The
+ ``--readonly`` option is an extra safety guard to prevent users from
+ accidentally starting a write or trim workload when that is not desired.
+ Fio will only modify the device under test if
+ `rw=write/randwrite/rw/randrw/trim/randtrim/trimwrite` is given. This
+ safety net can be used as an extra precaution.
.. option:: --eta=when
Force a full status dump of cumulative (from job start) values at `time`
intervals. This option does *not* provide per-period measurements. So
values such as bandwidth are running averages. When the time unit is omitted,
- `time` is interpreted in seconds.
+ `time` is interpreted in seconds. Note that using this option with
+ ``--output-format=json`` will yield output that technically isn't valid
+ json, since the output will be collated sets of valid json. It will need
+ to be split into valid sets of json after the run.
.. option:: --section=name
.. option:: --aux-path=path
- Use this `path` for fio state generated files.
+ Use the directory specified by `path` for generated state files instead
+ of the current working directory.
Any parameters following the options will be assumed to be job files, unless
they match a job file parameter. Multiple job files can be listed and each job
assigned equally distributed to job clones created by :option:`numjobs` as
long as they are using generated filenames. If specific `filename(s)` are
set fio will use the first listed directory, and thereby matching the
- `filename` semantic which generates a file each clone if not specified, but
- let all clones use the same if set.
+ `filename` semantic (which generates a file for each clone if not
+ specified, but lets all clones use the same file if set).
See the :option:`filename` option for information on how to escape "``:``" and
"``\``" characters within the directory path itself.
+ Note: To control the directory fio will use for internal state files
+ use :option:`--aux-path`.
+
.. option:: filename=str
Fio normally makes up a `filename` based on the job name, thread number, and
Unlink job files after each iteration or loop. Default: false.
-.. option:: zonesize=int
+.. option:: zonemode=str
- Divide a file into zones of the specified size. See :option:`zoneskip`.
+ Accepted values are:
+
+ **none**
+ The :option:`zonerange`, :option:`zonesize` and
+ :option:`zoneskip` parameters are ignored.
+ **strided**
+ I/O happens in a single zone until
+ :option:`zonesize` bytes have been transferred.
+ After that number of bytes has been
+ transferred processing of the next zone
+ starts.
+ **zbd**
+ Zoned block device mode. I/O happens
+ sequentially in each zone, even if random I/O
+ has been selected. Random I/O happens across
+ all zones instead of being restricted to a
+ single zone. The :option:`zoneskip` parameter
+ is ignored. :option:`zonerange` and
+ :option:`zonesize` must be identical.
.. option:: zonerange=int
- Give size of an I/O zone. See :option:`zoneskip`.
+ Size of a single zone. See also :option:`zonesize` and
+ :option:`zoneskip`.
+
+.. option:: zonesize=int
+
+ For :option:`zonemode` =strided, this is the number of bytes to
+ transfer before skipping :option:`zoneskip` bytes. If this parameter
+ is smaller than :option:`zonerange` then only a fraction of each zone
+ with :option:`zonerange` bytes will be accessed. If this parameter is
+ larger than :option:`zonerange` then each zone will be accessed
+ multiple times before skipping to the next zone.
+
+ For :option:`zonemode` =zbd, this is the size of a single zone. The
+ :option:`zonerange` parameter is ignored in this mode.
.. option:: zoneskip=int
- Skip the specified number of bytes when :option:`zonesize` data has been
- read. The two zone options can be used to only do I/O on zones of a file.
+ For :option:`zonemode` =strided, the number of bytes to skip after
+ :option:`zonesize` bytes of data have been transferred. This parameter
+ must be zero for :option:`zonemode` =zbd.
+
+.. option:: read_beyond_wp=bool
+
+ This parameter applies to :option:`zonemode` =zbd only.
+
+ Zoned block devices are block devices that consist of multiple zones.
+ Each zone has a type, e.g. conventional or sequential. A conventional
+ zone can be written at any offset that is a multiple of the block
+ size. Sequential zones must be written sequentially. The position at
+ which a write must occur is called the write pointer. A zoned block
+ device can be either drive managed, host managed or host aware. For
+ host managed devices the host must ensure that writes happen
+ sequentially. Fio recognizes host managed devices and serializes
+ writes to sequential zones for these devices.
+
+ If a read occurs in a sequential zone beyond the write pointer then
+ the zoned block device will complete the read without reading any data
+ from the storage medium. Since such reads lead to unrealistically high
+ bandwidth and IOPS numbers fio only reads beyond the write pointer if
+ explicitly told to do so. Default: false.
+
+.. option:: max_open_zones=int
+
+ When running a random write test across an entire drive many more
+ zones will be open than in a typical application workload. Hence this
+ command line option that allows to limit the number of open zones. The
+ number of open zones is defined as the number of zones to which write
+ commands are issued.
+
+.. option:: zone_reset_threshold=float
+
+ A number between zero and one that indicates the ratio of logical
+ blocks with data to the total number of logical blocks in the test
+ above which zones should be reset periodically.
+
+.. option:: zone_reset_frequency=float
+
+ A number between zero and one that indicates how often a zone reset
+ should be issued if the zone reset threshold has been exceeded. A zone
+ reset is submitted after each (1 / zone_reset_frequency) write
+ requests. This and the previous parameter can be used to simulate
+ garbage collection activity.
I/O type
**write**
Sequential writes.
**trim**
- Sequential trims (Linux block devices only).
+ Sequential trims (Linux block devices and SCSI
+ character devices only).
**randread**
Random reads.
**randwrite**
Random writes.
**randtrim**
- Random trims (Linux block devices only).
+ Random trims (Linux block devices and SCSI
+ character devices only).
**rw,readwrite**
Sequential mixed reads and writes.
**randrw**
and that some blocks may be read/written more than once. If this option is
used with :option:`verify` and multiple blocksizes (via :option:`bsrange`),
only intact blocks are verified, i.e., partially-overwritten blocks are
- ignored.
+ ignored. With an async I/O engine and an I/O depth > 1, it is possible for
+ the same block to be overwritten, which can cause verification errors. Either
+ do not use norandommap in this case, or also use the lfsr random generator.
.. option:: softrandommap=bool
If you want a workload that has 50% 2k reads and 50% 4k reads, while
having 90% 4k writes and 10% 8k writes, you would specify::
- bssplit=2k/50:4k/50,4k/90,8k/10
+ bssplit=2k/50:4k/50,4k/90:8k/10
Fio supports defining up to 64 different weights for each data
direction.
**pvsync2**
Basic :manpage:`preadv2(2)` or :manpage:`pwritev2(2)` I/O.
+ **io_uring**
+ Fast Linux native asynchronous I/O. Supports async IO
+ for both direct and buffered IO.
+ This engine defines engine specific options.
+
**libaio**
Linux native asynchronous I/O. Note that Linux may only support
queued behavior with non-buffered I/O (set ``direct=1`` or
ioctl, or if the target is an sg character device we use
:manpage:`read(2)` and :manpage:`write(2)` for asynchronous
I/O. Requires :option:`filename` option to specify either block or
- character devices.
+ character devices. This engine supports trim operations.
The sg engine includes engine specific options.
**null**
(RBD) via librbd without the need to use the kernel rbd driver. This
ioengine defines engine specific options.
+ **http**
+ I/O engine supporting GET/PUT requests over HTTP(S) with libcurl to
+ a WebDAV or S3 endpoint. This ioengine defines engine specific options.
+
+ This engine only supports direct IO of iodepth=1; you need to scale this
+ via numjobs. blocksize defines the size of the objects to be created.
+
+ TRIM is translated to object deletion.
+
**gfapi**
Using GlusterFS libgfapi sync interface to direct access to
GlusterFS volumes without having to go through FUSE. This ioengine
mounted with DAX on a persistent memory device through the PMDK
libpmem library.
+ **ime_psync**
+ Synchronous read and write using DDN's Infinite Memory Engine (IME).
+ This engine is very basic and issues calls to IME whenever an IO is
+ queued.
+
+ **ime_psyncv**
+ Synchronous read and write using DDN's Infinite Memory Engine (IME).
+ This engine uses iovecs and will try to stack as much IOs as possible
+ (if the IOs are "contiguous" and the IO depth is not exceeded)
+ before issuing a call to IME.
+
+ **ime_aio**
+ Asynchronous read and write using DDN's Infinite Memory Engine (IME).
+ This engine will try to stack as much IOs as possible by creating
+ requests for IME. FIO will then decide when to commit these requests.
+ **libiscsi**
+ Read and write iscsi lun with libiscsi.
+ **nbd**
+ Synchronous read and write a Network Block Device (NBD).
+
I/O engine specific parameters
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
with the caveat that when used on the command line, they must come after the
:option:`ioengine` that defines them is selected.
+.. option:: hipri : [io_uring]
+
+ If this option is set, fio will attempt to use polled IO completions.
+ Normal IO completions generate interrupts to signal the completion of
+ IO, polled completions do not. Hence they are require active reaping
+ by the application. The benefits are more efficient IO for high IOPS
+ scenarios, and lower latencies for low queue depth IO.
+
+.. option:: fixedbufs : [io_uring]
+
+ If fio is asked to do direct IO, then Linux will map pages for each
+ IO call, and release them when IO is done. If this option is set, the
+ pages are pre-mapped before IO is started. This eliminates the need to
+ map and release for each IO. This is more efficient, and reduces the
+ IO latency as well.
+
+.. option:: sqthread_poll : [io_uring]
+
+ Normally fio will submit IO by issuing a system call to notify the
+ kernel of available items in the SQ ring. If this option is set, the
+ act of submitting IO will be done by a polling thread in the kernel.
+ This frees up cycles for fio, at the cost of using more CPU in the
+ system.
+
+.. option:: sqthread_poll_cpu : [io_uring]
+
+ When :option:`sqthread_poll` is set, this option provides a way to
+ define which CPU should be used for the polling thread.
+
.. option:: userspace_reap : [libaio]
Normally, with the libaio engine in use, fio will use the
the force unit access (fua) flag. Default is 0.
.. option:: sg_write_mode=str : [sg]
+
Specify the type of write commands to issue. This option can take three values:
**write**
transferred to the device. The writefua option is ignored with this
selection.
+.. option:: http_host=str : [http]
+
+ Hostname to connect to. For S3, this could be the bucket hostname.
+ Default is **localhost**
+
+.. option:: http_user=str : [http]
+
+ Username for HTTP authentication.
+
+.. option:: http_pass=str : [http]
+
+ Password for HTTP authentication.
+
+.. option:: https=str : [http]
+
+ Enable HTTPS instead of http. *on* enables HTTPS; *insecure*
+ will enable HTTPS, but disable SSL peer verification (use with
+ caution!). Default is **off**
+
+.. option:: http_mode=str : [http]
+
+ Which HTTP access mode to use: *webdav*, *swift*, or *s3*.
+ Default is **webdav**
+
+.. option:: http_s3_region=str : [http]
+
+ The S3 region/zone string.
+ Default is **us-east-1**
+
+.. option:: http_s3_key=str : [http]
+
+ The S3 secret key.
+
+.. option:: http_s3_keyid=str : [http]
+
+ The S3 key/access id.
+
+.. option:: http_swift_auth_token=str : [http]
+
+ The Swift auth token. See the example configuration file on how
+ to retrieve this.
+
+.. option:: http_verbose=int : [http]
+
+ Enable verbose requests from libcurl. Useful for debugging. 1
+ turns on verbose logging from libcurl, 2 additionally enables
+ HTTP IO tracing. Default is **0**
+
I/O depth
~~~~~~~~~
``serialize_overlap`` tells fio to avoid provoking this behavior by explicitly
serializing in-flight I/Os that have a non-zero overlap. Note that setting
this option can reduce both performance and the :option:`iodepth` achieved.
- Additionally this option does not work when :option:`io_submit_mode` is set to
- offload. Default: false.
+
+ This option only applies to I/Os issued for a single job except when it is
+ enabled along with :option:`io_submit_mode`=offload. In offload mode, fio
+ will check for overlap among all I/Os submitted by offload jobs with :option:`serialize_overlap`
+ enabled.
+
+ Default: false.
.. option:: io_submit_mode=str
:manpage:`blktrace(8)` for how to capture such logging data. For blktrace
replay, the file needs to be turned into a blkparse binary data file first
(``blkparse <device> -o /dev/null -d file_for_fio.bin``).
+ You can specify a number of files by separating the names with a ':'
+ character. See the :option:`filename` option for information on how to
+ escape ':' and '\' characters within the file names. These files will
+ be sequentially assigned to job clones created by :option:`numjobs`.
+
+.. option:: read_iolog_chunked=bool
+
+ Determines how iolog is read. If false(default) entire :option:`read_iolog`
+ will be read at once. If selected true, input from iolog will be read
+ gradually. Useful when iolog is very large, or it is generated.
+
+.. option:: merge_blktrace_file=str
+
+ When specified, rather than replaying the logs passed to :option:`read_iolog`,
+ the logs go through a merge phase which aggregates them into a single
+ blktrace. The resulting file is then passed on as the :option:`read_iolog`
+ parameter. The intention here is to make the order of events consistent.
+ This limits the influence of the scheduler compared to replaying multiple
+ blktraces via concurrent jobs.
+
+.. option:: merge_blktrace_scalars=float_list
+
+ This is a percentage based option that is index paired with the list of
+ files passed to :option:`read_iolog`. When merging is performed, scale
+ the time of each event by the corresponding amount. For example,
+ ``--merge_blktrace_scalars="50:100"`` runs the first trace in halftime
+ and the second trace in realtime. This knob is separately tunable from
+ :option:`replay_time_scale` which scales the trace during runtime and
+ does not change the output of the merge unlike this option.
+
+.. option:: merge_blktrace_iters=float_list
+
+ This is a whole number option that is index paired with the list of files
+ passed to :option:`read_iolog`. When merging is performed, run each trace
+ for the specified number of iterations. For example,
+ ``--merge_blktrace_iters="2:1"`` runs the first trace for two iterations
+ and the second trace for one iteration.
.. option:: replay_no_stall=bool
.. option:: replay_align=int
- Force alignment of I/O offsets and lengths in a trace to this power of 2
- value.
+ Force alignment of the byte offsets in a trace to this value. The value
+ must be a power of 2.
.. option:: replay_scale=int
- Scale sector offsets down by this factor when replaying traces.
+ Scale byte offsets down by this factor when replaying traces. Should most
+ likely use :option:`replay_align` as well.
.. option:: replay_skip=str
previously written file. If the data direction includes any form of write,
the verify will be of the newly written data.
+ To avoid false verification errors, do not use the norandommap option when
+ verifying data with async I/O engines and I/O depths > 1. Or use the
+ norandommap and the lfsr random generator together to avoid writing to the
+ same offset with muliple outstanding I/Os.
+
.. option:: verify_offset=int
Swap the verification header with data somewhere else in the block before
data from the rolling collection window. Threshold limits can be expressed
as a fixed value or as a percentage of the mean in the collection window.
+ When using this feature, most jobs should include the :option:`time_based`
+ and :option:`runtime` options or the :option:`loops` option so that fio does not
+ stop running after it has covered the full size of the specified file(s) or device(s).
+
**iops**
Collect IOPS data. Stop the job if all individual IOPS measurements
are within the specified limit of the mean IOPS (e.g., ``iops:2``
.. option:: write_iops_log=str
Same as :option:`write_bw_log`, but writes an IOPS file (e.g.
- :file:`name_iops.x.log`) instead. See :option:`write_bw_log` for
- details about the filename format and `Log File Formats`_ for how data
- is structured within the file.
+ :file:`name_iops.x.log`) instead. Because fio defaults to individual
+ I/O logging, the value entry in the IOPS log will be 1 unless windowed
+ logging (see :option:`log_avg_msec`) has been enabled. See
+ :option:`write_bw_log` for details about the filename format and `Log
+ File Formats`_ for how data is structured within the file.
.. option:: log_avg_msec=int
2;card0;0;0;7139336;121836;60004;1;10109;27.932460;116.933948;220;126861;3495.446807;1085.368601;226;126864;3523.635629;1089.012448;24063;99944;50.275485%;59818.274627;5540.657370;7155060;122104;60004;1;8338;29.086342;117.839068;388;128077;5032.488518;1234.785715;391;128085;5061.839412;1236.909129;23436;100928;50.287926%;59964.832030;5644.844189;14.595833%;19.394167%;123706;0;7313;0.1%;0.1%;0.1%;0.1%;0.1%;0.1%;100.0%;0.00%;0.00%;0.00%;0.00%;0.00%;0.00%;0.01%;0.02%;0.05%;0.16%;6.04%;40.40%;52.68%;0.64%;0.01%;0.00%;0.01%;0.00%;0.00%;0.00%;0.00%;0.00%
A description of this job goes here.
-The job description (if provided) follows on a second line.
+The job description (if provided) follows on a second line for terse v2.
+It appears on the same line for other terse versions.
To enable terse output, use the :option:`--minimal` or
:option:`--output-format`\=terse command line options. The
terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_min;read_clat_max;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_min;write_clat_max;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
+In client/server mode terse output differs from what appears when jobs are run
+locally. Disk utilization data is omitted from the standard terse output and
+for v3 and later appears on its own separate line at the end of each terse
+reporting cycle.
+
JSON output
------------
**trim**
Trim the given file from the given `offset` for `length` bytes.
+
+I/O Replay - Merging Traces
+---------------------------
+
+Colocation is a common practice used to get the most out of a machine.
+Knowing which workloads play nicely with each other and which ones don't is
+a much harder task. While fio can replay workloads concurrently via multiple
+jobs, it leaves some variability up to the scheduler making results harder to
+reproduce. Merging is a way to make the order of events consistent.
+
+Merging is integrated into I/O replay and done when a
+:option:`merge_blktrace_file` is specified. The list of files passed to
+:option:`read_iolog` go through the merge process and output a single file
+stored to the specified file. The output file is passed on as if it were the
+only file passed to :option:`read_iolog`. An example would look like::
+
+ $ fio --read_iolog="<file1>:<file2>" --merge_blktrace_file="<output_file>"
+
+Creating only the merged file can be done by passing the command line argument
+:option:`merge-blktrace-only`.
+
+Scaling traces can be done to see the relative impact of any particular trace
+being slowed down or sped up. :option:`merge_blktrace_scalars` takes in a colon
+separated list of percentage scalars. It is index paired with the files passed
+to :option:`read_iolog`.
+
+With scaling, it may be desirable to match the running time of all traces.
+This can be done with :option:`merge_blktrace_iters`. It is index paired with
+:option:`read_iolog` just like :option:`merge_blktrace_scalars`.
+
+In an example, given two traces, A and B, each 60s long. If we want to see
+the impact of trace A issuing IOs twice as fast and repeat trace A over the
+runtime of trace B, the following can be done::
+
+ $ fio --read_iolog="<trace_a>:"<trace_b>" --merge_blktrace_file"<output_file>" --merge_blktrace_scalars="50:100" --merge_blktrace_iters="2:1"
+
+This runs trace A at 2x the speed twice for approximately the same runtime as
+a single run of trace B.
+
+
CPU idleness profiling
----------------------
**2**
I/O is a TRIM
-The entry's *block size* is always in bytes. The *offset* is the offset, in bytes,
-from the start of the file, for that particular I/O. The logging of the offset can be
+The entry's *block size* is always in bytes. The *offset* is the position in bytes
+from the start of the file for that particular I/O. The logging of the offset can be
toggled with :option:`log_offset`.
-Fio defaults to logging every individual I/O. When IOPS are logged for individual
-I/Os the *value* entry will always be 1. If windowed logging is enabled through
-:option:`log_avg_msec`, fio logs the average values over the specified period of time.
-If windowed logging is enabled and :option:`log_max_value` is set, then fio logs
-maximum values in that window instead of averages. Since *data direction*, *block
-size* and *offset* are per-I/O values, if windowed logging is enabled they
-aren't applicable and will be 0.
+Fio defaults to logging every individual I/O but when windowed logging is set
+through :option:`log_avg_msec`, either the average (by default) or the maximum
+(:option:`log_max_value` is set) *value* seen over the specified period of time
+is recorded. Each *data direction* seen within the window period will aggregate
+its values in a separate row. Further, when using windowed logging the *block
+size* and *offset* entries will always contain 0.
+
Client/Server
-------------
/mnt/nfs/fio/192.168.10.120.fileio.tmp
/mnt/nfs/fio/192.168.10.121.fileio.tmp
+
+Terse output in client/server mode will differ slightly from what is produced
+when fio is run in stand-alone mode. See the terse output section for details.
projects / fio.git / blobdiff