With writefua option set to 1, write operations include
the force unit access (fua) flag. Default is 0.
+.. option:: sg_write_mode=str : [sg]
+ Specify the type of write commands to issue. This option can take three values:
+
+ **write**
+ This is the default where write opcodes are issued as usual.
+ **verify**
+ Issue WRITE AND VERIFY commands. The BYTCHK bit is set to 0. This
+ directs the device to carry out a medium verification with no data
+ comparison. The writefua option is ignored with this selection.
+ **same**
+ Issue WRITE SAME commands. This transfers a single block to the device
+ and writes this same block of data to a contiguous sequence of LBAs
+ beginning at the specified offset. fio's block size parameter specifies
+ the amount of data written with each command. However, the amount of data
+ actually transferred to the device is equal to the device's block
+ (sector) size. For a device with 512 byte sectors, blocksize=8k will
+ write 16 sectors with each command. fio will still generate 8k of data
+ for each command but only the first 512 bytes will be used and
+ transferred to the device. The writefua option is ignored with this
+ selection.
I/O depth
~~~~~~~~~
Scale sector offsets down by this factor when replaying traces.
+.. option:: replay_skip=str
+
+ Sometimes it's useful to skip certain IO types in a replay trace.
+ This could be, for instance, eliminating the writes in the trace.
+ Or not replaying the trims/discards, if you are redirecting to
+ a device that doesn't support them. This option takes a comma
+ separated list of read, write, trim, sync.
+
Threads, processes and job synchronization
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
previously written file. If the data direction includes any form of write,
the verify will be of the newly written data.
-.. option:: verifysort=bool
-
- If true, fio will sort written verify blocks when it deems it faster to read
- them back in a sorted manner. This is often the case when overwriting an
- existing file, since the blocks are already laid out in the file system. You
- can ignore this option unless doing huge amounts of really fast I/O where
- the red-black tree sorting CPU time becomes significant. Default: true.
-
-.. option:: verifysort_nr=int
-
- Pre-load and sort verify blocks for a read workload.
-
.. option:: verify_offset=int
Swap the verification header with data somewhere else in the block before