**pareto**
Use a *Pareto* distribution to decide what file to access.
- **gauss**
+ **normal**
Use a *Gaussian* (normal) distribution to decide what file to
access.
+ **gauss**
+ Alias for normal.
+
For *random*, *roundrobin*, and *sequential*, a postfix can be appended to
tell fio how many I/Os to issue before switching to a new file. For example,
specifying ``file_service_type=random:8`` would cause fio to issue
.. option:: offset=int
- Start I/O at the provided offset in the file, given as either a fixed size or
- a percentage. If a percentage is given, the next ``blockalign``-ed offset
- will be used. Data before the given offset will not be touched. This
+ Start I/O at the provided offset in the file, given as either a fixed size in
+ bytes or a percentage. If a percentage is given, the next ``blockalign``-ed
+ offset will be used. Data before the given offset will not be touched. This
effectively caps the file size at `real_size - offset`. Can be combined with
:option:`size` to constrain the start and end range of the I/O workload.
+ A percentage can be specified by a number between 1 and 100 followed by '%',
+ for example, ``offset=20%`` to specify 20%.
.. option:: offset_increment=int
**pareto**
Pareto distribution
- **gauss**
+ **normal**
Normal (Gaussian) distribution
**zoned**
values will yield in terms of hit rates. If you wanted to use **zipf** with
a `theta` of 1.2, you would use ``random_distribution=zipf:1.2`` as the
option. If a non-uniform model is used, fio will disable use of the random
- map. For the **gauss** distribution, a normal deviation is supplied as a
- value between 0 and 100.
+ map. For the **normal** distribution, a normal (Gaussian) deviation is
+ supplied as a value between 0 and 100.
For a **zoned** distribution, fio supports specifying percentages of I/O
access that should fall within what range of the file or device. For
:file:`/dev/mtd0`). Discards are treated as erases. Depending on the
underlying device type, the I/O may have to go in a certain pattern,
e.g., on NAND, writing sequentially to erase blocks and discarding
- before overwriting. The writetrim mode works well for this
+ before overwriting. The `trimwrite` mode works well for this
constraint.
**pmemblk**
header of each block.
**crc32c**
- Use a crc32c sum of the data area and store it in the header of each
- block.
+ Use a crc32c sum of the data area and store it in the header of
+ each block. This will automatically use hardware acceleration
+ (e.g. SSE4.2 on an x86 or CRC crypto extensions on ARM64) but will
+ fall back to software crc32c if none is found. Generally the
+ fatest checksum fio supports when hardware accelerated.
**crc32c-intel**
- Use hardware assisted crc32c calculation provided on SSE4.2 enabled
- processors. Falls back to regular software crc32c, if not supported
- by the system.
+ Synonym for crc32c.
**crc32**
Use a crc32 sum of the data area and store it in the header of each
Below is a single line containing short names for each of the fields in the
minimal output v3, separated by semicolons::
- terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_max;read_clat_min;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_max;write_clat_min;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;pu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
+terse_version_3;fio_version;jobname;groupid;error;read_kb;read_bandwidth;read_iops;read_runtime_ms;read_slat_min;read_slat_max;read_slat_mean;read_slat_dev;read_clat_min;read_clat_max;read_clat_mean;read_clat_dev;read_clat_pct01;read_clat_pct02;read_clat_pct03;read_clat_pct04;read_clat_pct05;read_clat_pct06;read_clat_pct07;read_clat_pct08;read_clat_pct09;read_clat_pct10;read_clat_pct11;read_clat_pct12;read_clat_pct13;read_clat_pct14;read_clat_pct15;read_clat_pct16;read_clat_pct17;read_clat_pct18;read_clat_pct19;read_clat_pct20;read_tlat_min;read_lat_max;read_lat_mean;read_lat_dev;read_bw_min;read_bw_max;read_bw_agg_pct;read_bw_mean;read_bw_dev;write_kb;write_bandwidth;write_iops;write_runtime_ms;write_slat_min;write_slat_max;write_slat_mean;write_slat_dev;write_clat_min;write_clat_max;write_clat_mean;write_clat_dev;write_clat_pct01;write_clat_pct02;write_clat_pct03;write_clat_pct04;write_clat_pct05;write_clat_pct06;write_clat_pct07;write_clat_pct08;write_clat_pct09;write_clat_pct10;write_clat_pct11;write_clat_pct12;write_clat_pct13;write_clat_pct14;write_clat_pct15;write_clat_pct16;write_clat_pct17;write_clat_pct18;write_clat_pct19;write_clat_pct20;write_tlat_min;write_lat_max;write_lat_mean;write_lat_dev;write_bw_min;write_bw_max;write_bw_agg_pct;write_bw_mean;write_bw_dev;cpu_user;cpu_sys;cpu_csw;cpu_mjf;cpu_minf;iodepth_1;iodepth_2;iodepth_4;iodepth_8;iodepth_16;iodepth_32;iodepth_64;lat_2us;lat_4us;lat_10us;lat_20us;lat_50us;lat_100us;lat_250us;lat_500us;lat_750us;lat_1000us;lat_2ms;lat_4ms;lat_10ms;lat_20ms;lat_50ms;lat_100ms;lat_250ms;lat_500ms;lat_750ms;lat_1000ms;lat_2000ms;lat_over_2000ms;disk_name;disk_read_iops;disk_write_iops;disk_read_merges;disk_write_merges;disk_read_ticks;write_ticks;disk_queue_time;disk_util
Trace file format
projects / fio.git / blobdiff