$ fio --name=random-writers --ioengine=libaio --iodepth=4 --rw=randwrite --bs=32k --direct=0 --size=64m --numjobs=4
+4.1 Environment variables
+-------------------------
+
fio also supports environment variable expansion in job files. Any
substring of the form "${VARNAME}" as part of an option value (in other
words, on the right of the `='), will be expanded to the value of the
fio ships with a few example job files, you can also look there for
inspiration.
+4.2 Reserved keywords
+---------------------
+
+Additionally, fio has a set of reserved keywords that will be replaced
+internally with the appropriate value. Those keywords are:
+
+$pagesize The architecture page size of the running system
+$mb_memory Megabytes of total memory in the system
+$ncpus Number of online available CPUs
+
+These can be used on the command line or in the job file, and will be
+automatically substituted with the current system values when the job
+is run. Simple math is also supported on these keywords, so you can
+perform actions like:
+
+size=8*$mb_memory
+
+and get that properly expanded to 8 times the size of memory in the
+machine.
+
5.0 Detailed list of parameters
-------------------------------
a string. The following types are used:
str String. This is a sequence of alpha characters.
-time Integer with possible time postfix. In seconds unless otherwise
+time Integer with possible time suffix. In seconds unless otherwise
specified, use eg 10m for 10 minutes. Accepts s/m/h for seconds,
minutes, and hours.
-int SI integer. A whole number value, which may contain a postfix
- describing the base of the number. Accepted postfixes are k/m/g,
- meaning kilo, mega, and giga. So if you want to specify 4096,
- you could either write out '4096' or just give 4k. The postfixes
- signify base 2 values, so 1024 is 1k and 1024k is 1m and so on.
- If the option accepts an upper and lower range, use a colon ':'
- or minus '-' to separate such values. May also include a prefix
- to indicate numbers base. If 0x is used, the number is assumed to
- be hexadecimal. See irange.
+int SI integer. A whole number value, which may contain a suffix
+ describing the base of the number. Accepted suffixes are k/m/g/t/p,
+ meaning kilo, mega, giga, tera, and peta. The suffix is not case
+ sensitive. So if you want to specify 4096, you could either write
+ out '4096' or just give 4k. The suffixes signify base 2 values, so
+ 1024 is 1k and 1024k is 1m and so on. If the option accepts an upper
+ and lower range, use a colon ':' or minus '-' to separate such values.
+ May also include a prefix to indicate numbers base. If 0x is used,
+ the number is assumed to be hexadecimal. See irange.
bool Boolean. Usually parsed as an integer, however only defined for
true and false (1 and 0).
-irange Integer range with postfix. Allows value range to be given, such
+irange Integer range with suffix. Allows value range to be given, such
as 1024-4096. A colon may also be used as the separator, eg
1k:4k. If the option allows two sets of ranges, they can be
specified with a ',' or '/' delimiter: 1k-4k/8k-32k. Also see
can specify a number of files by separating the names with a
':' colon. So if you wanted a job to open /dev/sda and /dev/sdb
as the two working files, you would use
- filename=/dev/sda:/dev/sdb. '-' is a reserved name, meaning
- stdin or stdout. Which of the two depends on the read/write
+ filename=/dev/sda:/dev/sdb. If the wanted filename does need to
+ include a colon, then escape that with a '\' character. For
+ instance, if the filename is "/dev/dsk/foo@3,0:c", then you would
+ use filename="/dev/dsk/foo@3,0\:c". '-' is a reserved name,
+ meaning stdin or stdout. Which of the two depends on the read/write
direction set.
opendir=str Tell fio to recursively add any file it can find in this
randrepeat=bool For random IO workloads, seed the generator in a predictable
way so that results are repeatable across repetitions.
+fallocate=bool By default, fio will use fallocate() to advise the system
+ of the size of the file we are going to write. This can be
+ turned off with fallocate=0. May not be available on all
+ supported platforms.
+
fadvise_hint=bool By default, fio will use fadvise() to advise the kernel
on what IO patterns it is likely to issue. Sometimes you
want to test specific IO patterns without telling the
not sync the file. The exception is the sg io engine, which
synchronizes the disk cache anyway.
-fsyncdata=int Like fsync= but uses fdatasync() to only sync data and not
+fdatasync=int Like fsync= but uses fdatasync() to only sync data and not
metadata blocks.
+ In FreeBSD there is no fdatasync(), this falls back to
+ using fsync()
+
+sync_file_range=str:val Use sync_file_range() for every 'val' number of
+ write operations. Fio will track range of writes that
+ have happened since the last sync_file_range() call. 'str'
+ can currently be one or more of:
+
+ wait_before SYNC_FILE_RANGE_WAIT_BEFORE
+ write SYNC_FILE_RANGE_WRITE
+ wait_after SYNC_FILE_RANGE_WAIT_AFTER
+
+ So if you do sync_file_range=wait_before,write:8, fio would
+ use SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE for
+ every 8 writes. Also see the sync_file_range(2) man page.
+ This option is Linux specific.
overwrite=bool If true, writes to a file will always overwrite existing
data. If the file doesn't already exist, it will be
after every block.
rate=int Cap the bandwidth used by this job. The number is in bytes/sec,
- the normal postfix rules apply. You can use rate=500k to limit
+ the normal suffix rules apply. You can use rate=500k to limit
reads and writes to 500k each, or you can specify read and
writes separately. Using rate=1m,500k would limit reads to
1MB/sec and writes to 500KB/sec. Capping only reads or
sha256 Use sha256 as the checksum function.
+ sha1 Use optimized sha1 as the checksum function.
+
meta Write extra information about each io
(timestamp, block number etc.). The block
number is verified.
This option can be used for repeated burn-in tests of a
system to make sure that the written data is also
- correctly read back.
+ correctly read back. If the data direction given is
+ a read or random read, fio will assume that it should
+ verify a previously written file. If the data direction
+ includes any form of write, the verify will be of the
+ newly written data.
verifysort=bool If set, fio will sort written verify blocks when it deems
it faster to read them back in a sorted manner. This is
size of header_interval. blocksize should divide this
evenly.
-verify_pattern=int If set, fio will fill the io buffers with this
+verify_pattern=str If set, fio will fill the io buffers with this
pattern. Fio defaults to filling with totally random
bytes, but sometimes it's interesting to fill with a known
pattern for io verification purposes. Depending on the
width of the pattern, fio will fill 1/2/3/4 bytes of the
- buffer at the time. The verify_pattern cannot be larger than
- a 32-bit quantity.
+ buffer at the time(it can be either a decimal or a hex number).
+ The verify_pattern if larger than a 32-bit quantity has to
+ be a hex number that starts with either "0x" or "0X".
verify_fatal=bool Normally fio will keep checking the entire contents
before quitting on a block verification failure. If this
for doing these time calls will be excluded from other
uses. Fio will manually clear it from the CPU mask of other
jobs.
+
continue_on_error=bool Normally fio will exit the job on the first observed
failure. If this option is set, fio will continue the job when
there is a 'non-fatal error' (EIO or EILSEQ) until the runtime
given in the stats is the first error that was hit during the
run.
+cgroup=str Add job to this control group. If it doesn't exist, it will
+ be created. The system must have a mounted cgroup blkio
+ mount point for this to work. If your system doesn't have it
+ mounted, you can do so with:
+
+ # mount -t cgroup -o blkio none /cgroup
+
+cgroup_weight=int Set the weight of the cgroup to this value. See
+ the documentation that comes with the kernel, allowed values
+ are in the range of 100..1000.
+
+uid=int Instead of running as the invoking user, set the user ID to
+ this value before the thread/process does any work.
+
+gid=int Set group ID, see uid.
6.0 Interpreting the output
---------------------------
projects / fio.git / blobdiff